MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Make this change only for kiwi/peach using hal ops.
Change-Id: Id8665261a512c9db3e808f95082ff82b47f01ade
CRs-Fixed: 3464036
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/be folder, so fix them.
Change-Id: I9730c36e4d36dbe0ae551067c5c500441f07569f
CRs-Fixed: 3400933
For Multi chip configuration, assign appropriate value for
Return Buffer Manager(RBM) idle link descriptors based on chip_id.
CRs-Fixed: 3314584
Change-Id: I1a2f9a09b04960aff01b4ec625110e0619a9850b
Adding compact tlv support for QCN9224, As part of this change
Rx tlv size will reduce from 384 bytes to 128 bytes.
Change-Id: I3f42a781e42b2e696a5b25d9c5f333c8cc83b7fe
CRs-Fixed: 3274152
In case of Beryllium, REO hardware expects the REO destination indication
needs to be set in extended MSDU structure to consider the reinject of
packets after defragmentation to REO2SW1 ring.
Set the REO DESTINATION INDICATION in msdu_ext_desc_info in case of
Berylliyum initialization while setting MSDU desc info.
CRs-Fixed: 3306818
Change-Id: I6a7862a0448afeb169e04747c1dba352ce12c278
certain BE specific HAL APIs were only initialized for
KIWI chipset but not for WKK. Now moved all these APIs
under beryllium generic initialization.
These APIs are mainly used in de-frag pkt handling.
CRs-Fixed: 3294784
Change-Id: I6611f1b7ef80b432d24a490ba65880dd55539137
Hal layer changes to handle Umac post reset
and post reset complete events from firmware.
Change-Id: Ib25427930aab25650731c87b38e2ef7e47ae98d9
CRs-Fixed: 3267222
1. Changes to move hal_tx_config_rbm_mapping_be function from common to
device specific as it has ppe related snippets.
2. Changes to remove all PPE related codes in QCA5332 hal code.
3. Changes to correct macros according to fw_hrs.
4. Changes to move functions with device specific Macros to header files
so that it gets compiled with respective device's FW headers and gets
correct Macros
Change-Id: I479b406f318aa42d2b1032349aaf42d95b8c18e5
CRs-Fixed: 3235966
The original BA window size given from CP might > max DP supported,
add sanity check based on HAL target allowed.
Change-Id: Ibadaddeffe65165a89d580d8a5cbf5f7c724c809
CRs-Fixed: 3193852
Even if HW cookie conversion is enabled on KIWI, there is some
case HW cookie conversion might not be done by HW, check the cookie
conversion done bit and get Phy Address accordingly.
Change-Id: I4ee7ed9776086812774637f07da1e4504898c3c4
CRs-Fixed: 3153433
Fetch phy addresses for wbm release ring descs
in the cookie conversion enabled case
Change-Id: I420dc395bfa7b783dfed98b7258e7c0f0728e543
CRs-Fixed: 3146766
Bifurcate the hal_get_reo_qdesc_size to corresponding lithium
or Berillium platforms.
This can handle difference, if any between them and later enhance
to set the qdesc size based on peer negotiation.
Currently for NON_QOS_TID, the BA window size is hardcoded as
256 for Li and 1024 for Be.
Also modify hal_reo_cmd_update_queue_params to accommodate higher
Block-Ack Window size. For this steal bits from pn_size and use
pn_size values as macros PN_SIZE_XX which is only 3 bits,
instead of 8bits.
Change-Id: If310175da579aa3a47a8b031a1774c6c8982d4b2
CRs-Fixed: 3125986
KIWI V2 WBM completion release reason codes are changed to match legacy
lithium release codes. Takecare to enable translation only for KIWI V1.
Change-Id: I094f40440b290ae424b47a7ba176b81ffea6c592
CRs-Fixed: 3132359
Add 2 hal soc ops, hal_msdu_desc_info_set and
hal_mpdu_desc_info_se for berilliyum datapath.
Attach hal_rx_msdu_ext_desc_info_get_ptr_be to its function
pointer.
Get reo queue descriptor address as a 5 byte value as in
beryllium datapath it is being obtained from rx packet tlv.
Change-Id: Ia58597384e1a3d5eec493b865a88bab4f209502d
CRs-Fixed: 3084532
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
Below are the changes in HW headers for E1.5
1) WBM2SW release source enum changed back to lithium values
2) DSCP to tid table num is added in Bank register
3) MCAST ctrl value is moved from Bank to seperate register
Change-Id: I342c451d792b1618dcb62ca9d4c77dcf4d4beeac
Register, for WCN7850, the hal ops to get the
current PN for a packet from the tlvs.
Change-Id: I9fabc84aee318de2031bfa5f88dafe19b723079a
CRs-Fixed: 2965086
To fix the below compilation error, included "hal_be_rx_tlv.h" header file
in hal_be_generic_api.c file.
"cmn_dev/hal/wifi3.0/be/hal_be_generic_api.c:754:40: error:
'hal_rx_tlv_get_pn_num_be' undeclared (first use in this function);
did you mean 'hal_rx_tlv_get_pn_num'?"
Change-Id: I57074967dad8cee98fc8094c4eadc9289b7e7984
CRs-Fixed: 2974607
PN number get function handler is not initialized,
This lead to CFI assert. Add correct handlers for
differnt chipsets.
Change-Id: Ib8836af0d69380da597822d1755bb5dd2309c95f
CRs-Fixed: 2968223
Add the changes to the generic HAL APIs.
The APIs generic across lithium and beryllium
architecture are kept in common HAL code.
The APIs which are generic across lithium
chipsets are moved to lithium specific files.
The APIs which are generic across beryllium
chipsets are kept in beryllium specific files.
Change-Id: Ie5e28aca5de02aa42f63b4a13fcb1cb32ffa8a28
CRs-Fixed: 2891049
