Hex dump in monitor descriptor processing is causing high
CPU utilization. Since it is not advisable to add prints/debug
in per packet processing, remove hex dump debug log.
Change-Id: Ic98c3608a468cf4665ea94b1ebee725ca7121545
CRs-Fixed: 3571491
Debug logs in per packet tlv processing is causing high CPU utilization.
Remove these debug logs.
Change-Id: I520b3a83c7a5cafefe6f2d25d14ea5c1b9816b11
CRs-Fixed: 3571491
Fix tlv processing code for monitor mode in Big endian mode.
Changed all the 64bit tlv extraction apis and used 32 bit extraction apis.
This is needed in big endian mode since HW supports word swap option and
TLV has to be intepretted using 32bit extraction APIs.
TLV tag, userid and TLV len falls on the first 32 bit and hence using
both 32bit or 64 bit extraction APIs give same result.
Change-Id: I9b9ff78c79f21888964d405016c58c3b5988b254
CRs-Fixed: 3551002
Add Tx TLV recording support for monitor 2.0
Also add support to control Rx and Tx TLV
recording
Change-Id: I27a0d2c9ea8bdfacd46e6b7188b45b08ed47bbcd
CRs-Fixed: 3422787
This reverts commit I2a697f91e572f88a36f96085d15c90c679deaf0c.
Original change was added to support manual ulofdma trigger but it
needs to be reverted here due to a small tweak in design approach.
New design to be integrated and hence reverting this one.
Change-Id: I4c358db48298666c753aa89166a31adbba067e36
CRs-Fixed: 3429084
Extract manual ulofdma trigger bit as part of rx ppdu stats per user
update process
Change-Id: I2a697f91e572f88a36f96085d15c90c679deaf0c
CRs-Fixed: 3418677
Add TLV recording support for Rx monitor. The TLV
tag and its data are recorded in a fixed size buffer
Change-Id: Idad896d1ece25a499ab76028c8a231fcd9947f66
CRs-Fixed: 3402543
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/be folder, so fix them.
Change-Id: I9730c36e4d36dbe0ae551067c5c500441f07569f
CRs-Fixed: 3400933
Added support for parsing firmware to software tlv. which is mainly used
for populating frequency of the current packet.
Change-Id: I67c552e6d6b5caf9c12c34e553bad70b89b30c40
CRs-Fixed: 3270364
Add debug count for count MPDU received based on preamble type,
reception type, UL/DL and user for max 4 user for MU monitor
mode
Change-Id: I87f1553e1f2f8276501366a825d629cf051d8a80
CRs-Fixed: 3326272
Add control frame stats accounting support.
Accumulate both per peer BAR and NDPA counts in Tx and Rx per PPDU stats
path. Accumulate per peer RTS success and failure count only in per PPDU
Tx stats path.
Change-Id: I78fb3546cd831559e208a7330feb2eb67b9a28de
CRs-Fixed: 3313435
Add support for,
a) HE MU radiotap information
b) Multi sta BA frame generation and
minor fix,
a) handling timestamp NULL,
b) update NSS and other field in radiotap
Change-Id: I7a8b95328779f967b9e63ff8048242412ab472b0
CRs-Fixed: 3270361
sgi is getting overwritten in cmn usr TLV.
Add check if sgi and ltf_size is already set.
CRs-Fixed: 3279670
Change-Id: I8260eb71230b2c218e45460adc8f404a19eefa80
Currently there are few TLVs which are received in
the monitor status ring, but are not parsed for any
data. Since these TLVs are unhandled, it causes
excessive logging per monitor status ring entry.
To avoid such excessive logging, handle the currently
unhandled TLVs which are always received as part of
other TLVs in monitor status ring.
Change-Id: Idbe5a25e926a088adacaf5dfb892aff5885f8576
CRs-Fixed: 3266650
Add support and handle tx monitor full buffer payload and
other minior fix include change of name for uniformity.
Change-Id: If401ecd5e1c6263584fa7013df672459c883ca8b
CRs-Fixed: 3215244
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: Id97d026b2d90a607974cc541d0301565af423f2f
CRs-Fixed: 3218239
a. Fix memleak issue due to RX_HDR not received for a MPDU
b. Compute appropriate packet offset for non-decapped packets
c. Add correct DMA_LEN while adding a frag to SKB.
d. Add debug stats
Change-Id: Ie946f79df94df05789220b97c159c60d608bf1b2
CRs-Fixed: 3213698
Incorrect value of macro QDF_MON_STATUS_USIG_MU_VALIDATE2_SHIFT
leads to non-zero value of field "Punctured Channel Info" in
USIG TLV in radiotap header even if puncturing is not enabled.
Correct the value of macro QDF_MON_STATUS_USIG_MU_VALIDATE2_SHIFT to 14.
Also use correct set of macros for setting of usig_mask.
Change-Id: I4a5594f784137238ee4aa072c7595e83673c1960
CRs-Fixed: 3218536
WIFIRX_STATUS_BUFFER_DONE_E tlv indicates the dma
to monitor status ring is complete. Currently this
tlv is unhandled and the logs are flooded with error
message for this TLV being unhandled.
Handle the status buffer done tlv to remove the
unnecssary logging onto the console.
Change-Id: Ie1ac6adf46092ba7bff3ee4a3262fc98c8a6eb3d
CRs-Fixed: 3208659
Add fix for tx monitor double free and other minor fixes like updating
channel frequency and channel number if it wasn't fetched properly,
fetch protection address only if it is valid.
Change-Id: I184e08080a47b903176b9df0a192f0b5eb0b2750
CRs-Fixed: 3184727
For MU_MIMO traffic from AP to STA, RSSI Legacy TLV gives
reception type as QDF_RECEPTION_TYPE_ULOFMDA which is incorrect.
In order to fix this, update reception type from PPDU Start User
Info TLV. Also remove updation of reception type from LSIG TLVs
to avoid override of reception type value.
Change-Id: I9ef4c5bc7a15d4e68404d702bec61eca9c9bad4c
CRs-Fixed: 3178085
a. For decapped frames, convert frames from 802.3 t 802.11
b. for non-decapped frames no conversion is needed
c. Apply radiotap header and deliver MPDU to osif layer
CRs-Fixed: 3074441
Change-Id: Ia03b4bad35d69aa292958782cd424f3df56dabbc
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
