نمودار کامیت

1648 کامیت‌ها

مولف SHA1 پیام تاریخ
Mohit Khanna
47384bcd39 qcacld-3.0: fix peer map handler race condition
The existing peer_map_unmap_lock in ol_txrx_peer_find_add_id
does not include call to ol_txrx_peer_unref_delete. The peer addition
handling needs to be atomic with peer reference deletion (in case peer
ref deletion is required).

Move the peer_map_unmap_lock to include ol_txrx_peer_unref_delete.

CRs-Fixed: 1056442
Change-Id: Ica15ea70527f0ea116b960dd7958da73f304288b
2016-08-19 18:33:07 -07:00
Arun Khandavalli
d454d42793 qcacld-3.0: Increase WMA_STA_WOW_DEFAULT_PTRN_MAX to 5
qcacld-2.0 to qcacld-3.0 propagation

The problem with the existing code is:
* WMA_STA_WOW_DEFAULT_PTRN_MAX is set to 4 and in wma_wow_sta()
  we make sure atleast WMA_STA_WOW_DEFAULT_PTRN_MAX free slots are
  available before configuring the default wow pattern. But after this
  check we are actually configuring 5 default wow patterns.
* If BPF is enabled, we are limiting the Max WoW patterns to 2,
  because the free slots are 2 which is less than the expected default
  free slots WMA_STA_WOW_DEFAULT_PTRN_MAX. we are not configuring
  default STA mode wow pattern and hence no wakeups observed for
  incoming packets.
Address this issue by changing the WMA_STA_WOW_DEFAULT_PTRN_MAX to 5 and
MAX WoW filters to WMA_STA_WOW_DEFAULT_PTRN_MAX if BPF is enabled.

Change-Id: If433cff18ce511e7fdffadff69ee13b762a1719b
CRs-Fixed: 973054
2016-08-19 18:33:05 -07:00
Arun Khandavalli
3dd06deb03 qcacld-3.0: BPF fixes for check connection state, set maxwow filter
qcacld-2.0 to qcacld-3.0 propagation

* Set BPF filter only if the station/p2p client is in the connected
  state.
* Depending on the BPF service enabled in firmware dynamically
  configure the number of wow filters.
    - If bpf enabled maxwowfilter is 2.
    - If bpf is disabled maxwowfilter is read from ini.

Change-Id: I14c722c9a1189f4ba4fbc2c8a554ae85b7a61fa8
CRs-Fixed: 967535
2016-08-19 18:33:04 -07:00
Arun Khandavalli
c67110c9b2 qcacld-3.0: Start ap adapter from __wlan_hdd_add_virtual_intf
With SAP+STA concurrency there shall be a new interface created softap0 on
which SAP comes up. In the present scenario the support for starting
the ap adapter only via the change interface.
Since the SAP adapter is not started the start_bss request from the
upper layer fails.

To migitate the issue add support for the start ap adapter from the
 __wlan_hdd_add_virtual_intf.

Change-Id: I4d112441b5aa7ff91dafa9e43f9aceb18d0e13f0
CRs-Fixed: 1056331
2016-08-19 18:33:01 -07:00
qcabuildsw
4cf1ca19ea Release 5.1.0.23T
Release 5.1.0.23T

Change-Id: Id3726a27cc0f0a3600c1e961cb5282f16369283f
CRs-Fixed: 688141
2016-08-19 16:58:23 -07:00
Sreelakshmi Konamki
e1cd51f194 qcacld-3.0: Update ICMP and ICMPV6 WOW wake up stats
qcacld-2.0 to qcacld-3.0 propagation

Currently ICMP counter is incremented only for IPV4 multicast packets.
But ICMP count includes total unicast/multicast/broadcast ICMP packets.

Add changes to update ICMP counter for unicast/multicast/broadcast
ICMP packets.

Change-Id: I00f9fb0c8231fd69f6c108ced8028eb19315006e
CRs-Fixed: 1020079
2016-08-19 16:58:20 -07:00
Padma, Santhosh Kumar
5e33bebbc2 qcacld-3.0: Get wakelock stats
qcacld-2.0 to qcacld-3.0 propagation

Send wakelock stats to HAL layer when it requests through vendor
command QCA_NL80211_VENDOR_SUBCMD_WAKELOCK_STATS. This is a
blocking request in HDD.

Change-Id: Ie043323d90f63c19de2da9d1b8b54bc28d2c8f3d
CRs-Fixed: 958964
2016-08-19 16:58:18 -07:00
Govind Singh
068c4b0fc3 qcacld-3.0: Set NAPI event after hif layer is initialized
hdd_napi_event requires hif_ctx, after dynamic mode feature hif_ctx
is getting created later as part of hdd_start_modules. HIF ctx is being
created/destroyed depending on the interface up/down from the upper
layer, hence set NAPI event after hif layer is initialized.

Change-Id: I9fb21f6f75cc689620a6befd997956610e2ca3ae
CRs-fixed: 1055660
2016-08-19 16:58:16 -07:00
Anurag Chouhan
19aa3bf9b4 qcacld-3.0: CL 1607151 - update fw common interface files
Propagation from qcacld-2.0 to qcacld-3.0

add nan_data_supported_bands to NaN capabilities messages

Change-Id: Ib7ee708c9235e86cf9588d011de29df1e34ad690
CRs-fixed: 865207
2016-08-19 16:58:13 -07:00
Anurag Chouhan
e326c92400 qcacld-3.0: CL 1605795 - update fw common interface files
Propagation from qcacld-2.0 to qcacld-3.0

WMI pdev POWER_STATS request and report message defs
pktlog flag in HTT_T2H RX_IN_ORD_PADDR_IND
New release of Hawkeye HW header files

Change-Id: If2f122a6879b60052849b7efb738e7fc1a4c23f3
CRs-fixed: 865207
2016-08-19 16:58:11 -07:00
Anurag Chouhan
e28b1f0798 qcacld-3.0: CL 1602603 - update fw common interface files
Propagation from qcacld-2.0 to qcacld-3.0

define WMI_PKTLOG_EVENT_SW
Update htt.h with Lithium TCL/TX related data structures

Change-Id: Ica0b6cd11df8a84a0b7e0771354795aa082f20fe
CRs-fixed: 865207
2016-08-19 16:58:09 -07:00
Anurag Chouhan
11b53a140c qcacld-3.0: CL 1598475 - update fw common interface files
Propagation from qcacld-2.0 to qcacld-3.0

Adding defined weightage values for WMI_PDEV_SET_PCL_CMDID
Add filter configure interface in fwcommon for sniffer mode.

Change-Id: Ic822863cbbaffe7303dedf7f6c16ba92c2d0a5d3
CRs-fixed: 865207
2016-08-19 16:58:06 -07:00
qcabuildsw
6c453d93a6 Release 5.1.0.23S
Release 5.1.0.23S

Change-Id: I9b6d5c1ccb88c478e7eecb9f82d4aae56f132820
CRs-Fixed: 688141
2016-08-19 11:03:51 -07:00
Arif Hussain
aca67305b5 qcacld-3.0: SAP: Add radar pulse table for KR and CN
Add radar pulse table for new DFS domain KR and CN.

Change-Id: I75708a215f51b558a6b7573bcc730a08d2e4bd11
CRs-Fixed: 1047817
2016-08-19 11:03:51 -07:00
Amar Singhal
604ba6cf04 qcacld-3.0: Modify DFS region for KR and CN
KR and CN have different DFS regions than what kernel provides.
Assign the correct DFS regions for KR and CN. Also use "enum
dfs_region" as the parameter type in functions that have
dfs region as parameter.

CRs-Fixed: 1047214
Change-Id: I2ddd67d3c29a448dd2a1d3a63113750783fb6731
2016-08-19 11:03:51 -07:00
qcabuildsw
2807f3d22e Release 5.1.0.23R
Release 5.1.0.23R

Change-Id: I384e3faaaff18c51d750542f45ab1a1f3cd7ca96
CRs-Fixed: 688141
2016-08-19 11:03:51 -07:00
Yuanyuan Liu
3e918e5ca3 qcacld-3.0: Send WLAN off event to WLS at the end of WLAN off steps
send WLAN off event to WLS at the end of WLAN off steps
to make sure WLAN is really off when WLS calls 'glink deinit'.

Change-Id: I29e15d51ec306071fc9f5ff7e3565c75814944e8
CRs-Fixed: 985226
2016-08-19 11:03:51 -07:00
Yuanyuan Liu
f2ee05f167 qcacld-3.0: Provide PLD API for getting IRQ number
Provide PLD API of getting IRQ number for a given CE ID.

Change-Id: Icd293993e84ab4daa98430db231b8b73e082cd29
CRs-Fixed: 1047259
2016-08-19 11:03:51 -07:00
Yuanyuan Liu
9135361da5 qcacld-3.0: Remove platform stub files
Remove platform stub files as PLD takes care of platform APIs.

CRs-Fixed: 1056957
Change-Id: I0364d8a58f272f3646b913063f6484c83c2b7985
2016-08-19 11:01:34 -07:00
qcabuildsw
b07f5ab403 Release 5.1.0.23Q
Release 5.1.0.23Q

Change-Id: I5dda077d8a1160e20b91077856dc7be7a89c9543
CRs-Fixed: 688141
2016-08-18 09:11:48 -07:00
Manishekar Chandrasekaran
d3ee9756dc qcacld-3.0: Ensure MAS commands to be made PDEV specific
Make MAS (MCC Adaptive Scheduler) commands to be PDEV
specific.

Two instances of OCS (Off Channel Scheduler) can exist
in the FW (one per MAC) and FW provides the option of
enabling and disabling MAS on a per MAC basis. But,
Host does not have enable/disable option for individual
MACs. So, the agreement with the FW is for the Host to
send down a ‘pdev id’ of 0. When ‘pdev id’ of 0 is used,
FW treats this as a SOC level command and applies the
same value to both MACs. So, irrespective of the value
of ‘WMI_SERVICE_DEPRECATED_REPLACE’ in the WMI service
bit map, the pdev id needs to be ‘0’ (SOC level) for
the WMI command
WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID.

WMI command WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID to set
the MCC quota is sent down as channel – value pairs.
The value being channel time quota and the channel being
sent down is a home channel. The additional requirement
from FW is that all the channels in a single WMI command
belong to the same MAC. FW asserts if the WMI command
mixes and matches home channels associated with
different MACs. So, although the PDEV ID is not part of
the WMI command struct, the cmd is in a sense PDEV
specific.

There is no change in the WMI command
WMI_RESMGR_SET_CHAN_LATENCY_CMDID to make it PDEV
specific since this WMI command always send only one
channel-latency pair to the FW. So, there shouldn’t be
any problem of FW receiving home channels associated
with different MACs, for this WMI command.

Change-Id: Ie22800e07bbeef65c43f9171de828533b982a06b
CRs-Fixed: 1052652
2016-08-18 09:11:47 -07:00
qcabuildsw
cf6ce2c055 Release 5.1.0.23P
Release 5.1.0.23P

Change-Id: Ie16a5163c716d5bd9fc0ee211ab206079218d6c4
CRs-Fixed: 688141
2016-08-18 01:49:44 -07:00
Govind Singh
b84759415b qcacld-3.0: Add ndp_ctx NULL check in error scenario
Add ndp_ctx NULL check in error scenario before
dereferencing it.

Propagation from qcacld-2.0 to qcacld-3.0.

Change-Id: I7a6aa92351e0140b78c9d7b95f2a6cca45f8e387
CRs-Fixed: 1044060
2016-08-18 01:49:43 -07:00
qcabuildsw
e5fe78c945 Release 5.1.0.23O
Release 5.1.0.23O

Change-Id: I5db783be1a0d9568d335588cee0b49a82734721a
CRs-Fixed: 688141
2016-08-18 00:41:02 -07:00
Nirav Shah
c657ef50ea qcacld-3.0: Changes to update mac_id in packetlog
Changes to update mac_id in packetlog header
for DBS.

Change-Id: I602d399e1ef34077b5d7bfc867fb60678ed8612c
CRs-fixed: 1047382
2016-08-18 00:41:01 -07:00
qcabuildsw
cb6e2089bb Release 5.1.0.23N
Release 5.1.0.23N

Change-Id: Iea866eec216ff827b53869454df616934852120a
CRs-Fixed: 688141
2016-08-17 20:06:12 -07:00
Sandeep Puligilla
829d6acb75 qcacld-3.0: Remove duplicate OBSS start scan request
Host is sending OBSS start scan request twice to firmware.
OBSS scan start is triggered as part of the set context response
processing and it gets called twice after association.

Added condition check to allow only once the OBSS scan request.

Change-Id: I8ccc7172df9d89aaa09ad924ced7f8ed5a6ace13
CRs-Fixed: 1053626
2016-08-17 20:06:11 -07:00
Krishna Kumaar Natarajan
da90922125 qcacld-3.0: Fix incorrect compilation flag termination
Fix incorrect compilation flag termination.

Under WLAN_ENABLE_AGEIE_ON_SCAN_RESULTS compilation flag TDLS and few
other unrelated changes were present. This change set will remove
the unrelated changes outside this compilation flag.

Change-Id: I16ca3013147c549acc1b0758c268af717166ac57
CRs-Fixed: 1050754
2016-08-17 20:06:09 -07:00
Krishna Kumaar Natarajan
89a99d46ed qcacld-3.0: Provide sequence control information to userspace
Provide sequence control information to userpace tool via
vendor IE.

Change-Id: Ic0489f7fca3519964b12aa5f272bd66a4d02115c
CRs-Fixed: 1050754
2016-08-17 20:06:06 -07:00
Poddar, Siddarth
7ca1e08421 qcacld-3.0: Delete PMF Sta from previous vdev
qcacld-2.0 to qcacld-3.0 propagation

If a PMF Sta is already connected to one interface and try
to switch to other interface without sending deauth/disassoc,
sta entry is not deleted from previous vdev and one more entry
is created on current vdev. Due to this htt is not able to get
valid peer for EAPOL packets and EAPOL packets are dropped leading
to connection failure.
To fix this, Add check to delete PMF Sta from one vdev when
assoc request is received on another vdev.

Change-Id: Ida2e20fe08af3c6ed426822a71db1fd6854a0bea
CRs-Fixed: 1033224
2016-08-17 20:06:04 -07:00
qcabuildsw
53675724ec Release 5.1.0.23M
Release 5.1.0.23M

Change-Id: I5d684de1663405265674bbbf42d8ebeb604853fb
CRs-Fixed: 688141
2016-08-17 17:07:05 -07:00
Poddar, Siddarth
74178df581 qcacld-3.0: Add argument to ol_tx_queue_free for vdev or peer queues
qcacld-2.0 to qcacld-3.0 propagation

Add additional argument in ol_tx_queue_free to indicate whether
txq is vdev or peer queues to avoid extracting peer_id in case of
vdev txq queue in ol_tx_queue_log_free function.

Change-Id: Ic521c23b4001f15a382e9435413cdafca0c8b49f
CRs-Fixed: 1023457
2016-08-17 17:07:03 -07:00
Poddar, Siddarth
0cec8eaf67 qcacld-3.0: add NULL check and drop rx indication for a frame
qcacld-2.0 to qcacld-3.0 propagation

Add check to handle kernel NULL pointer dereference
during calling ol_rx_reorder_release.

Change-Id: If0367e0a7910d7ee460709fc8ae25ecc6de3485d
CRs-Fixed: 994435
2016-08-17 17:07:01 -07:00
Kabilan Kannan
ff89f748c1 qcacld-3.0: Avoid race condition in antenna switch operation
qcacld-2.0 to qcacld-3.0 propagation

When the TDLS traffic flows continuously between the two
peers and if the antenna switch command comes from the
user, it creates a race condition and blocks the
antenna switch operation.
Add a new transition state in TDLS to avoid this race
condition.

Change-Id: I1c9b183c460e1401bd1ee2631489c57778ec665b
CRs-Fixed: 971505
2016-08-17 17:06:58 -07:00
Selvaraj, Sridhar
35cc2cf07c qcacld-3.0: Don't populate TDLS IE's in extended capabilities
qcacld-2.0 to qcacld-3.0 propagation

Currently in case of IBSS, beacons are populated with TDLS IE's
in extended capabilities though TDLS IE's and extended capabilities
doesn't signify anything.

Fix will ensure to exclude extended capabilities and TDLS IE's

Git-commit: c50b50f7f0616b4536e7df998e98f9347562e680
Change-Id: I63b6f413964cc53f2f25496fef40f99c4244293a
CRs-Fixed: 1017887
2016-08-17 17:06:55 -07:00
Yun Park
7f171abb04 qcacld-3.0: Fix potential NULL dereference in ol_txrx_ipa_uc_get_resource
Pointer 'cds_get_context(QDF_MODULE_ID_TXRX)' returned from call to
function ol_txrx_ipa_uc_get_resource may be NULL and will be
dereferenced.
The fix is to check if cds_get_context is not NULL before passing it
to ol_txrx_ipa_uc_get_resource.

Change-Id: Idbb69bcbef6cb54df334c30419dc0f7015466f28
CRs-Fixed: 1042048
2016-08-17 17:06:53 -07:00
Arun Khandavalli
0850081699 qcacld-3.0: Validate the memory allocation for the bpf program
Validate the memory allocated for the bpf filter program before
dereferencing it.

Also return the correct error status to the caller

Change-Id: Ia165e2f8611830f26c6e466f74bb5e32fc8822e8
CRs-Fixed: 1042027
2016-08-17 17:06:51 -07:00
Mukul Sharma
45114d999a qcacld-3.0: Move scan_results_available from bucket complete to cycle complete
qcacld-2.0 to qcacld-3.0 propagation

Currently extscan_results_available event is posted to user space after a
bucket scan is completed. If the extscan start request is configured for
multiple buckets, then the user space application tries to fetch cached
results on every extscan_results available.
If the get_cached_results is issued with flush=1, then every get_cached_results
will have 0 scan results and since flush=1 is set, due to a bug in firmware
even the temporary scan cache is flushed, there by we miss reporting the
APs found in the previous bucket scans and only the last get_cached_results
will report the APs found in the last bucket scan. Whereas the expectation is
get_cached_results must report all the APs found in the complete scan cycle.
The proposed fix is in both firmware and host:
1. Firmware to ignore get_cached_results flush=1 and not to flush the temporary
   scan cache in the middle of extscan cycle.
2. Host to consume bucket_started event within host driver and map
   extscan_results_available with cycle_complete instead of bucket_complete.

Change-Id: I399204261fa3d8515146c590630a3bb663ee801c
CRs-Fixed: 975402
2016-08-17 17:06:48 -07:00
Mukul Sharma
fa937be21a qcacld-3.0: Enhance EXTSCAN feature
qcacld-2.0 to qcacld-3.0 propagation

Make the following enhancements to the EXTSCAN feature:
* Add buckets_scanned param while sending
  on_full_scan_result/cached result event to user space.
* Configure REPORT_EVENTS_CONTEXT_HUB to firmware.
* Remove status while sending on_scan_event to user space.
* Add support for SCAN_THRESHOLD_NUM_SCANS /
  SCAN_THRESHOLD_PERCENT while sending scan event.

Change-Id: Ib37ce7cef5b3ce9d9ee4ebdc5ea9bcadaad7b695
CRs-Fixed: 960456
2016-08-17 17:06:45 -07:00
Rajeev Kumar
dd3bc6012f qcacld-3.0: Add INI item to control BPF feature configuration
Add INI item to control BPF feature configuration.

Change-Id: Ia110916f5d657db6970f988dab5c3be55074c3bf
CRs-Fixed: 1055033
2016-08-17 17:06:43 -07:00
Rajeev Kumar
ea4eb0b037 qcacld-3.0: Disable suspend/resume unit test framework in Kbuild
APPS suspend/resume support is ready. By default disable WLAN suspend
resume test framework and enable it in engineering builds on need basis.

Change-Id: If1e23ed41987a1f8b40cfae6504f6b69f8a06932
CRs-Fixed: 1055093
2016-08-17 17:06:40 -07:00
Himanshu Agarwal
ec51a5a4c8 qcacld-3.0: Dump more WoW wakeup packet info
Propagation from qcacld-2.0 to qcacld-3.0.

Dump some more info for WOW wakeup packet:
   1) ether_type
   2) proto_type in case of IPV4 and IPV6 packets
   3) src port and dst port in case of TCP/UDP

Change-Id: I1578aa5322af50f0ae43248c48a2f754ea081970
CRs-Fixed: 1043939
2016-08-17 17:06:38 -07:00
Himanshu Agarwal
f951500494 qcacld-3.0: Change print type from %d to %u for unsigned variables
Propagation from qcacld-2.0 to qcacld-3.0.

Change print type from %d to %u for the unsigned variables in
wma_wow_dump_mgmt_buffer and wma_wow_parse_data_pkt_buffer.

Change-Id: I2ea9ae2aa5c6f1bbec65b724de35a0071ea26804
CRs-Fixed: 1038593
2016-08-17 17:06:35 -07:00
Himanshu Agarwal
dd356df33d qcacld-3.0: Dump header info for first mgmt. packet after WOW wakeup
Propagation from qcacld-2.0 to qcacld-3.0.

Dump soem information such as source MAC address, destination
MAC address, sequence number, packet type, subtype and other
important information for the first mgmt. packet after WOW wakeup.

Change-Id: I4f39d93e8aeb243ec3df5cc1a916aec0a1aa4819
CRs-Fixed: 1019037
2016-08-17 17:06:33 -07:00
Himanshu Agarwal
82de9040dd qcacld-3.0: Dump header info for first data packet after WOW wakeup
Propagation from qcacld-2.0 to qcacld-3.0.

Dump some information such as source MAC address, destination
MAC address, sequence number, packet type, subtype and other
important information for the first data packet after WOW wakeup.

Change-Id: I3c83991f56be34412f3f10adf58bd991ecb536ca
CRs-Fixed: 1019037
2016-08-17 17:06:31 -07:00
Nirav Shah
5e74bb81d5 qcacld-3.0: Parse tx packets only once in tx datapath
Classify tx packets at one place and store packet type in
skb cb structure to avoid multiple check to determine
packet type at various layers.

Change-Id: Id2ea9b08bdcbc62b1d96d983d19bcf71becc9c42
CRs-Fixed: 1022454
2016-08-17 17:06:28 -07:00
Nirav Shah
bd36b0690b qcacld-3.0: Changes to support different rx data path
Changes to configure different rx data path rx_thread,
RPS or NAPI through ini parameters. Also added support
for RPS mask setting using cnss-daemon.

CRs-fixed: 1026370
Change-Id: I23ab8fe0f05245b38cf4b37e93da8fd99d4c1f68
2016-08-17 17:06:26 -07:00
qcabuildsw
aedea909b4 Release 5.1.0.23L
Release 5.1.0.23L

Change-Id: I5d82962af91661bd6ab69a36784180e032e99211
CRs-Fixed: 688141
2016-08-17 11:21:48 -07:00
Arif Hussain
e69337b2ca qcacld-3.0: Update wma_get_channels as per the latest draft for 160MHz
as per the latest draft for BSS bandwidth 160MHz, channel frequency segment 2
represents the center channel frequency. Update wma_get_channels to use correct
segment to calculate center channel when operating in 160MHz.

Change-Id: I9a8f2035b590a90415fbc5a0a6608c48bbd5b2e5
CRs-Fixed: 1048793
2016-08-17 11:21:48 -07:00
Prakash Dhavali
6b561685d4 Release 5.1.0.23K
Release 5.1.0.23K

Change-Id: I1af1099fb2be6547036ffc2d60d841d4b4e51af6
CRs-Fixed: 688141
2016-08-17 11:21:48 -07:00