Debugfs support for HTT stats under compile
time flag "HTT_STATS_DEBUGFS_SUPPORT".
Change-Id: I44c4f11265fdb3b9d53a9ac545e2945854bb9a57
CRs-Fixed: 2760947
Add logic to pre-allocate DP consistent memory and reuse later
on wifi on/off. This prevents memory fragmentation.
Change-Id: I1e5eb0da39950a5d028dd46d38ff715f283e53ff
CRs-Fixed: 2740889
Currently the rx tid spinlock is destroyed from
peer delete (based on peer state) or peer unmap handler.
This can lead to a race condition when the peer is
deleted before the peer map command is processed/received.
Fix the above race condition by destroying the rx tid
spinlock only when the peer handle is destroyed/freed.
Change-Id: Iaf7ccea11a95732c1aa20e66af6dd4a9a66517c5
CRs-Fixed: 2763533
As part of the VoW IGMP improvements, which deals with
conversion of igmp packets to unicast packets, the
following changes are done when the new feature is enabled:
1. IGMP/MLD packets with special addresses (addresses not
part of any multicast group) will be converted to all
existing clients of the AP. These packets will be
directly fed to igmp multicast to unicast conversion
module.
2. The IGMP/MLD packets with group specific addresses will
first go to multicast enhancement module, where they
will be allowed to pass and will be converted to unicast.
3. The new feature will be enabled only when multicast
enhancement feature is enabled, which will be ensured
at the configuration level.
FR : 61063
Change-Id: I2fd5a67766c806432fbe1a12cb9654a3600100f5
In roam HO failure, peer unmap indication is processed
even before Host initiates the peer cleanup. In the cleanup,
as part of cdp_peer_teardown, AST entries are freed up without
removing it from the peer AST list since get_peer_by_ref_id
returns NULL peer pointer as peer is moved to inactive state.
Fix is to delete peer AST entries as part of peer unmap
indication so that the entries are removed from the AST list.
Change-Id: I1b04517e8cc392b33bb439501e61e3d5534d8307
CRs-Fixed: 2763825
For QCN9000, full monitor is controlled through,
a. full_mon_mode ini param
b. QCA_SUPPORT_FULL_MON compile time macro
Currently enabling full monitor is not taken care under
macro QCA_SUPPORT_FULL_MON.
As monitor mode is not supported for 256M profile,
QCA_SUPPORT_FULL_MON is disabled.
Enable full monitor mode when both ini and macro are enabled.
Change-Id: Id5be5f7edc4739423fd74e28bb71a8f3339d87b3
CRs-Fixed: 2744622
This change will add a build flag support to MSCS wherein
the functions will be called based on the status of the flag
created. This flag will be enabled by default.
Change-Id: I1c234c710d3b37f534ed2df7b37343cbd65ab930
CRs-Fixed: 2757257
In tx desc store vdev_id to avoid unprotected access of
vdev memory.
In tx path pass VDEV as argument to all APIs
In completion path get vdev from peer as vdev reference
in peer is protected with reference, in places where peer
is invalid get vdev object using vdev_id stored in tx desc
with a reference count
Change-Id: I364ebb51143218872c0bc6f856772ab1df00bb17
CE2 status ring full condition results in WMI req timeout
in host resulting in self recovery being triggered.
Set IRQ affinity of CE IRQs to gold cores for defconfig
builds only. This is to alleviate the processing of all
DP rings and CE rings on CPU0.
CE2 status ring will be reaped fast enough to ensure host
has enough credits from FW to send out the WMI reqs to FW.
Change-Id: Ifef338faac17b44eae811d23ec41d89bde1b29c7
CRs-Fixed: 2738317
Add INI to modify the HW checksum capability advertisement.
Add hook to update enable/disable of HW checksum for vdev.
Change-Id: Idd0bad1d39c8411c7b4ef19483aa2c75a756791b
CRs-Fixed: 2732099
Add debug support for VDEV refcount to take
refcount by module id and decrement corresponding
refcount with same module id
Change-Id: I15c075816994ba70155fefbc0bce208b20fb9a59
Add new API dp_vdev_get_ref_by_id() which will return vdev
pointer by holding a reference. Caller of this API has
to ensure that this reference is released by calling
dp_vdev_unref_delete() API
New lock soc->vdev_map_lock is introduced to protect
vdev id to object array
Change-Id: I883e328932e35ef31254125492dbae20cebe0e00
This change will acquire MSCS parameters from the
MSCS request sent by the STA and provide it to the
data path which will later use it for building flow
database.
Change-Id: I972154792c682527f8df04de693077188726e8da
CRs-Fixed: 2669386
New approach requires module IDs to be passed to
acquire and release peer references
Hence pass module ID to acquire and release the
peer reference
CRs-Fixed: 2755560
Change-Id: Id351179da68f6ca30f13710a47575f3ff550ada3
Add new APIs to iterate through the vdev peer list
by taking the peer reference.
A call back has to be passed to these APIs which will
be called for every peer in the lisst
dp_vdev_iterate_peer() -> iterates through peer_list of vdev
dp_pdev_iterate_peer() -> iterates through peer_list of all
vdevs in pdev
dp_soc_iterate_peer() -> iterates through peer_lists of all vdevs
in soc
Additonal APIs are added to for itearations where the callback
will be called outside the vdev->peer_list_lock, as these APIs
have additional memory allocations suggested to use only in case
the iteration need to happen outside lock
dp_vdev_iterate_peer_lock_safe()
dp_pdev_iterate_peer_lock_safe()
dp_soc_iterate_peer_lock_safe
Change-Id: I24632fe611355cc3e93b7f16d90913d4b8686ca9
Remove the peer backpointer in ast entry and store
peer_id instead
Assign peer_id in AST entry in AST MAP event,
also add the ast entry to peers ast list
In AST map & AST unmap APIs use ast find by vdev_id
Change-Id: I74d9828dc309149d98f6f577b5c8304cb087fd76
Add support to get the peer reference with module id
To help debug the peer reference related issues
Change-Id: Ie20c7e710b9784b52f2e0f3d7488509282528a00
Use unified version of dp_peer_find_by_id API
which will take peer reference
Also use unified peer ref release API dp_peer_unref_delete
Change-Id: Ibb516a933020a42a5584dbbbba59f8d9b72dcaa4
Update peer DB as per new design
peer_hash_table: add at peer_create and delete at peer delete
peer_id_to_obj_map: add at peer map and delete at peer unmap
peer_list: vdev level peer list add at peer create delete at
peer delete
Call dp_peer_cleanup() at unmap event
dp_peer_cleanup -> dp_peer_tx_cleanup -> Tx capture cleanup
|
---------> dp_peer_rx_cleanup -> Cleanup Rx REO TID queues &
defrag queue free
Introduce ref_cnt variable per VAP which will be
incremented and decremented at peer alloc and free. This counter
will be used to delay the vdev free if there are any active
peers for vdev exist in system
Change-Id: Iec13bceed0db0db71655fdbf6f96df8795b5077b
Remove the global soc->peer_ref_mutex lock to protect
peer access
Instead use granular locks to protect the individual
peer DBs
1) soc→peer_hash_lock : To protect peer hash table
2) soc→peer_map_lock : To protect id to objmap array
3) vdev→peer_list_lock : To protect vdev level peer list
Change-Id: I9f044c4d71fe1155817a2b22a5a050545ec37445
Peer wlanstats context was accessed directly from
PPDU cookie, with this approach the cookie pointer
may become stale if peer goes for deletion
Hence access the wlanstats context using CDP API
with stats context protection
CRs-Fixed: 2740261
Change-Id: I54c785325f8852ad422f05527b98ebca6e4d6cf0
Add allocation check failure before accessing index in
dp_soc_rx_history. In case of allocation failure for a particular ring,
continue with allocation and history recording of other rings.
Change-Id: Ifae46ddf38b3af271900651cdbba662325220ef9
CRs-Fixed: 2747891
In dp_srng_init, max_buffer_length and prefetch_timer are used
while uninitialized.
In dp_bucket_index, overrunning array cdp_sw_enq_delay leads to
out-of-bounds access.
In dp_rx_defrag_fraglist_insert, cur is first NULL checked but
cur is again set to qdf_nbuf_next and is accessed without
NULL check. Thus do a NULL check again before dereferencing
cur to avoid potential NULL pointer dereference.
In htt_t2h_stats_handler, soc could be NULL while cmn_init_done
is dereferenced. Thus fix it by NULL check soc first and then
dereference cmn_init_done.
Change-Id: Ie6a33347d34862f30ba04a10096d3892af7571d3
CRs-Fixed: 2751573
Add support to retrieve per PPDU phy tx duration without response time.
Add support to retrieve per User phy tx duration for MU-MIMO and OFDMA.
These metrics are useful for ATF stats feature. Stats processing done
only if atf stats flag is set.
CRs-Fixed: 2709102
Change-Id: I90db41aa45843808e07343a80750c154abbde9cd
Memory optimization of monitor status ring by allocating buffers during
replenish using alloc_skb (linux API).
It creates buffer of required size rather than 4k size(dev_alloc_skb)
Change-Id: I3ae5e403de28c4570f8ac3b50d3ca878a9e4b2f9
CRs-Fixed: 2733931
Currently when query REO stats, each time REO will response
cumulative REO stats per TID, while host side count them as
delta stats between each query.
Reset host stats to 0 before each query, and if query timeout
happened, use the last saved stats for this time query.
Change-Id: I29e986b3c8859f5c3d1b557d9cc980a52219d664
CRs-Fixed: 2743352
Remove self and BSS peer back pointers and added APIs to
get self and BSS peer from VDEV
These new APIs will iterate through peer list and return
the appropriate peer by taking a reference
Caller has to take care of releasing the reference
Change-Id: I550ff83d665f3ad0a185bea1a1e6270c5474ff07
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: I01d5f7b30da803ee713a14c1d1124b8af7161bca
CRs-Fixed: 2609951
Notification is sent in following two scenarios.
- After call to dp_peer_add_ast() if we are not expecting any
peer map event.
- When HTT peer map event is received.
Change-Id: Id926d1cec1ee64520b0368fcc5000988c24e0513
CRs-Fixed: 2745542
The rx rings are relatively of smaller size. Any
duplicate entry sent by hardware cannot be back-tracked
by just looking at the ring contents alone.
Hence add a history to track the entries for the
REO2SW, REO exception and SW2REO ring.
Change-Id: I9b0b311950d60a9421378ce0fcc0535be450f713
CRs-Fixed: 2739181
Add support to get device name and invoke debugfs init
on post attach so that device name is updated at that point.
Change-Id: I0e0a06cae4bef4d6e43c0295f5db99220b185df2
In monitor mode, the packets for 5GHz go to lmac ring 0 and for
2.4GHz packets go to lmac ring 1. But this is valid for DBS solution.
For single MAC solution, both 2G and 5G packets go to lmac ring 0.
Add mapping between channel band and lmac id ring and populate
this mapping table based on target type i.e DBS or Single MAC.
Change-Id: Iabc7c2088caca6fe4adef1da6d45945fc9a2716c
CRs-Fixed: 2728664
Allocate/Deallocated the peer extended object in the
peer_create() and peer_del() paths respectively.
Change-Id: I3e93e1ec85aefb22d3fb40d1b01bbd07d660aff5
Cleanup the code to fix the compile error while setting
CONFIG_REMOVE_PKT_LOG=y & CONFIG_WDI_EVENT_ENABLE=n
with Hasting
Change-Id: I493fbddec865fe20789022445b0f155201772119
Move the srng history to hif context.
Process the monitor ring only for the lmac
corresponding to the configured monitor channel.
Add the timer and srng history for monitor mode.
Change-Id: I4e5e49ad5e657b55bfafbb40ef5f59496277cb40
CRs-Fixed: 2690530
Adding support for enabling ini config to remap reo destination rings
for HK v1, HK v2, maple and pine platforms.
Change-Id: Id9d304521f32497e3acd845ddd2973b96b641516
Fix static analysis issue of rx_refill_buf_ring buffer overflow.
rx_refill_buf_ring length is different for WIN/MCL. For MCL length is 1,
WIN is 3. So rx_refill_buf_ring should always use index pdev->lmac_id to
replenish rx buffer for different MACs under MCL.
Change-Id: I00af069c09c01a81ae4aa54bad5beb79dc6fcff5
CRs-Fixed: 2703683
Currently there is a single INI item tcp_udp_checksumoffload to enable
or disable this feature for all the adapters. In some cases, we want to
be able to enable this feature selectively for NAN mode.
Add nan_tcp_udp_checksumoffload ini item to enable or disable checksum
offload feature specifically for NAN mode. If
nan_tcp_udp_checksumoffload is 'true' and tcp_udp_checksumoffload is
false, hardware checksum offload will be enabled only for the NAN
adapter and not for other adapters.
CRs-Fixed: 2693638
Change-Id: I6e255ce68ddc7b01ebdefe4e5e8d2c985388fefe
