This change adds a debug node named 'crc' to drm_dp to read
the frame CRC values for DP controller and DP Sink. In order
to facilitate the immediate read of the CRC values when
accessed, it enables the CRC calculation on the controller
and sink automatically when the stream is enabled. In addition
to the frame CRC values it also reads the MISR values from
controller and PHY to validate the data flow from controller
to PHY.
Change-Id: I1acee2dba931e4635caf4a400e336a72c86e88bf
Signed-off-by: Rajkumar Subbiah <quic_rsubbia@quicinc.com>
The current pll driver models the entire DP clock
hierarchy using the clock framework. This creates
unnecessary dependency between the dp driver and
the clock driver and also limits the flexibility
to dp driver when configuring the DP clocks.
This change models these clocks as single nodes
and provide full control to the dp driver and
also minimizes the dependency on the clock driver.
Change-Id: Id5221441ea33b576e7c543396a12cbeb7b44d319
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Skip link training when in simulation mode considering that we
are not yet implementing tests specific to link training. This
change will reduce the time it takes to power on the panel in
simulation mode, and also reduce the likelihood of failures
caused by unresponsive host machines.
Change-Id: Ie215cafd545bb25b4a033ceae1f275c690e7433d
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
During resume, DP uses AUX to perform various functionalities
like DPCD/EDID read or link training etc. This involves other
hardware modules as well like USB and Charger. In a situation
like continuous suspend/resume, while DP is processing resume,
suspend can trigger resulting in dependent hardware modules
to go to sleep. As AUX communication is hardware interrupt
based, this can result in unstable system.
Abort all functionalities before going to suspend to
avoid unnecessary AUX and other functionality failures.
Change-Id: Id52d408270232adf7258a7eb064ee969eba4be71
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Ensure that the driver is handling DSC and FEC
enablement properly. FEC can now be independently
enabled without DSC. FEC configuration is also
now performed after link training in order to
avoid link training failures as per the DP spec.
Consequently, DSC can now be left on during
compliance testing. For DSC use-cases, ensure
that the minimum supported bpp is set to 24, as
required by the DSC spec.
CRs-Fixed: 2517994
Change-Id: I40339585da5b4e51251a3be7119b6959954954d7
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
