DRE is not disabled properly on targets where kcontrols are not exposed.
Add separate check for both SWR PCM and PDM data transport cases to
avoid having dependency on kcontrol.
Change-Id: Ifbd9aaa8213540c9cc19690ef70b30336580116a
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Implement changes to make the driver compatible with bolero V2.2.
Change-Id: If2797a80f775c685ff2a6912de189b1d9b4906d0
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
add support to select PDM or PCM path in rx macro with the help
of mixer ctls.
Change-Id: I803e0bf440c1b3546cbda23e49736addb9083d92
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Enable the clk as per sequence.
Change-Id: I54d6981a70b218d4655514bb69ff39a7581264a2
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
After ADSP is up during SSR, core_hw_vote may fail and audio_hw_vote
may successed in lpass_cdc_runtime_resume which is caused some timing.
When getting slave device_id, as core_hw_vote is 0, it will skip reading
swr registers and return 0 which causes fail to read correct device_id.
Make this change to avoid calling lpass_cdc_runtime_resume when adsp_up
notification doesn't reach lpass_cdc.
Change-Id: I90a97e5c47bb95180a96ba1c60b462f1fa0124b7
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Signed-off-by: Kunlei Zhang <quic_kunleiz@quicinc.com>
replace all dev(pr)_err/info logs
that could potentially flood kernel logs with
ratelimit functions dev_err_ratelimited and
dev_info_ratelimited
Change-Id: I32dc6002dead1a07622978c4de63d541c01982fd
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Sometimes after SSR/DPR is triggered, RX_TX_CORE_CLK, WSA_TX_CORE_CLK
and WSA2_TX_CORE_CLK are not reset which causes WSA or WCD not
detected. Make this change to add reset during SSR.
Change-Id: I343f2f92244de3eee844e220a6201b389dc647b4
Signed-off-by: Meng Wang <mengw@codeaurora.org>
During ssr, when powering down audio path and core vote fails,
it directly exits without disabling clock. After adsp is up,
it will enable both RX_MCLk and RX_TX_MCLK which causes
glitch on headset output.
Change-Id: I98d3cdbffa0a5ae1ac4064579a52a29b02d4ae3e
Signed-off-by: Deepali Jindal <deepjind@codeaurora.org>
The number of HIFI FIR coeff will not be retained if power collapsed,
need to be written right before FIR_START is kicked off.
Change-Id: I034949eb7748f8b2e5b21445fa10f4f1df66a7bf
Previously code will not write coefficients if there are exactly 100 coeffs
in first coeffs write. Or if user update coeffs on the fly with one group
unchanged.
Change-Id: Id4e8af06dec6b247f4a79a797d5b61668fd1e7f4
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
During sound card register init call, if swr pdev
is not initialized yet respective soundwire port
config is not updated to soundwire controller device.
In macro drivers, update swr pdev into macro private
data prior to platform device add.
Change-Id: Ifa67471cfc7a10b102b573df6285e598bb0b5e5e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Enable HiFi FIR PCM filter on digital codec to support HiFi audio playback on headset.
Change-Id: I5bc03ed45a3fd149c93dc04f33be0a581b519d44
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Return from config compander during aux path powerup
as aux path compander is not present.
Change-Id: I5ed1557dddfb64c8712d92c75fd58aa98b96355d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update correct offset to set IIR1 registers to make sidetone work.
Change-Id: I94cc7f54c5d68954565d683aee0d3e887eebedb3
Signed-off-by: Meng Wang <mengw@codeaurora.org>
In va, rx and wsa macros, move schedule_work call to
add the child devices to the point later to where the parent
initialization gets completed.
Change-Id: I2095f1007beae253534b2ed44f988ce55fad6b75
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Auto suspend timer for core vote is triggering before read write complete.
Move the auto suspend of core vote to post read write operation.
Change-Id: I619da358c7c42af45ef480ed0dba2c2cc26e9cc1
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
In soundwire version 1.7, rx soundwire port2/3
are extended to 32bits to use as PCM port too.
When using for PDM port as well, need to ungate
the ports for functionality to work.
Change-Id: I1815a9337ab21e0000ca7dbfeaac4c01dadec0dc
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Remove bcl decode registers and add new central broadcast
decode registers.
Enable the new central broadcast (CB) block registers during usecase
start and request for bcl data inorder to receive current bcl events.
Change-Id: I4c626e5083328b4cfdb5c956695078985b5c54a5
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
update SOC_SINGLE_MULTI_EXT to byte control for IIR mixer controls.
Change-Id: I94f09b9dd26e4da8a307e0add22634e2ab15aa66
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Update codec driver dai link names for proper enumeration of
dai links during sound card enumeration.
Change-Id: I91630f60647c83095bc979b09aad1b273b44f71c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update compander settings table to calculate based on
upper gain and lower gain.
Change-Id: Ib423f3c14c900c0df03bc8fcab2df0f62fb614f1
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
On lpass-cdc 2.5 support unified compander. Update macros
to align to this feature.
Change-Id: Id444116511db48e8f20948ed7fc4af4fca87b8e4
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update lpass-cdc version 2p5 registers update and remove old
version tables.
Change-Id: I14e0efe09e3ff5ded49b91e2e226558ae444bc0f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add driver support to enable lpass digital codec for
audio playback and capture usecases.
Change-Id: I3d31d31f340db79334700e8fd495f40479e0ec6c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
