Changes are made to add register write logs to memory dump.
This can be extracted from crash dumps and used for analysis.
Change-Id: If46aaa4ae68f83c79d4b51cbe5dfd22340aa991d
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Add VM ownership checks before accessing the HW through the debugfs
path in sde dbg module to avoid illegal access. Set the ownership
status on bootup based on the VM.
Change-Id: I30f2a1eb7e049740f1f7fe3ed03aa411264ba7b3
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Fix dlkm compilation errors that are due to the use of -Werror
flags used by the build system.
Change-Id: I5e1e9bc63c1361d73e4930aab123212717872ecb
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Currently, SDE_DBG_DUMP takes any number of hw block names along with
few defined strings as arguments. This set of arguments is used to
determine which HW block registers needs to be dumped. Move to a
blk bitmask to avoid passing a large set of arguments. The bitmask is
split based on the clks required to access the HW block for ease of use.
The lower 0-23 bits are used for HW blocks which can be accessed by just
enabling the MDP clks. DP is kept separate as it needs DP specific
clks to be enabled. Add a debugfs node through which the mask can be
modified, which can be useful while using the debugfs dump option to
force a panic.
As part of the change, remove in-log/in-mem enable mask debugfs node
for every debugbus and use a single node to control the logging
mechanism for all the HW blocks debugbus.
Change-Id: Ibb6354b3e3265c9911104bb0f964616eb8a898c9
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add support to the dump the DP register space and debugbus information.
Change-Id: I903471b07fdd1926b0fc505a980b2a5048387b69
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a flag SDE_DBG_DUMP_IN_LOG_LIMITED based on which the debug bus
registers dumped in log can be limited. In memory logging will continue
to dump the full range of configured registers if that flag is set.
Currently the in-log limited support is enabled only for the sde/vbif
debugbus and both IN_LOG & IN_LOG_LIMITED will be treated the same way
for other blocks.
Change-Id: Ie85d3d16955cfa507bb3e02954d9b313851eef78
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add macros for logging the registers/debugbus, so all blocks
can use the same macros to keep the log format consistent.
Change-Id: Ie28ce83a742f24f3091bedab66c8cf1454bbb943
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Refactor the debugbus read/logging for sde/dsi/vbif/lutdma to use the
same helpers. Use function pointers to read/write specific hw block
operations. Remove the DBGBUS_FLAGS_DSPP and related checks as it is
not used. Increase the debugbus block/test-point ranges for all the
blocks to log all the test-points used by hardware.
Change-Id: I07b23d21f9c556eb7575b892f87ab94adfe41116
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
As per the HW teams guidelines, allow dumping the status of
all the HW blocks blocks at every test point.
This code brings in the following changes
1) Featurize the hw block and test point range per target.
2) Reduce the debug bus entries and decrease the static
memory foot print.
3) Allow analyzers to be integrated into the new format.
Change-Id: Ic3bc2c1b77f5617b0f81a2066b22e50cfd6ff8dd
Signed-off-by: Mahadevan <mahap@codeaurora.org>
This patch allows event log and display ramdump
module compilation when DEBUG_FS config is in disabled
state.
Change-Id: Ibe1ff7d9d4a4f3c64091df757caba2450295e7ec
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Add hooks to dump LUTDUMA debug bus status during dumping
of system debug status. LUTDMA debug bus can be accessed
from userspace via the "recovery_lutdma_dbgbus" debugfs node.
Output control of the LUTDMA_dbbus is managed by the
"reg_dma_dbgbus" node.
Change-Id: Iea011279dd3806f0f594102ce7a5dc018a8d2b7c
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Add support to allow creation of debugfs node only if
CONFIG_DEBUG_FS is enabled.
Change-Id: Iaeaf51b3654c9458cf8131a9756e6b905007c4ae
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Move DSI debugbus dumping logic from DSI driver to sde_dbg
in order to utilize the framework in place for debugbuses.
This allows for more control over the dumping logic, such
as where the dump data is stored(memory/console), via nodes
populated in debugfs.
Change-Id: Iff507fdaa02d26af26743e81f6048aec57c09a76
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Fix the buffer size calculations for dumping VBIF debug bus
data. The previous code didn't take in to account that not
all test point reads start from 0 resulting in a much larger
than necessary buffer containing lots of useless zeroed data.
Change-Id: I4379f9e6517d51e1eaebe1ded32a7fc1f87cb3d4
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Use a single read function for dumping SDE, VBIF, and DSI debugbus
dumps via debugfs when a recovery event occurs.
Change-Id: I9828a308cabea6f73d9219d784b097913a31dcee
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Change the version checks to only consider the major revision
so debug bus support trickles down from premium tier targets.
Change-Id: I882957c043c9de7cebf595d719bfd35f2c18f447
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Configure sde and vbif debug bus name when
it is registered instead of while registering
the debugfs node.
Change-Id: I41afeede0b3d725a3b6d164e1c0f22e05f7320ec
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Update the table with new testpoints added for lahaina.
Change-Id: Ib1253f696e6e670b6dc475cc68a73c8c41ee264b
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Upstream has added an "enhancement" to the DMA allocator to
reject coherent allocations less than a a full page, so allocate
device managed memory instead of artificially inflating the
buffer sizes. This has the added benefit of having this memory
automatically freed when the module is unloaded, avoiding
possible leaks.
Change-Id: I653f2cd1f06f1a352cd61e36ea8baaf7c30efd98
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Register the MDSS_HW block (at base offset 0) for access via the
sde_reg node in SDE's debugfs directory. This is needed for
validating correct UBWC register programming.
Change-Id: I2494e066a7603747f2ec12546e58a17f2120a521
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Local tone mapping hardware block has defined test points for debug bus.
Change updates the missing test points and enables dumping of the
registers in case of DPU hang.
Change-Id: I5bb5419255e84427c0a1393f8e9322b981eea084
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Add check for length of debugfs_ctrl value before
copying to user buffer invoked during read operation.
Change-Id: I199110992921d0ae3791129fa0bf1e51dcca9107
Signed-off-by: Prashant Singh <prasin@codeaurora.org>
Change adds dsi debug bus support for kona based devices.
Change-Id: Ied969abff63128efdd39a9900380dd726666842d
Signed-off-by: Vara Reddy <varar@codeaurora.org>
This change is a snapshot of dsi files taken of 4.14
as of commit 764f7c2 (Merge remote-tracking branch
'quic/dev/msm-4.14-display' into msm-4.14)
Change-Id: I8361a844c35a4450f7800964a8da2741676fd6c7
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Write to hardware registers should be exposed for only debug
purpose. Hence use CONFIG_DYNAMIC_DEBUG to restrict register
writes only for debug defconfig.
Change-Id: I0b67b46a69920f6620570ace9d4faf732076126d
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
The open method for the debug fops are supposed to extract
the appropriate register base for the corresponding
hardware blocks, which are later used for the register
read and writes for the associated hardware block. But
the current open method being used points to some random
register base which can lead to fatal issues when performed
reads and writes to registers. Hence implemented a new
open method to extract the appropriate register base of the
various mdp hardware blocks. This patch also fixes
the valid sub range check against the corresponding
hardware blocks instead of checking across all the hardware
blocks.
Change-Id: I2a08fae74b3cbd31f2931c3b89b7308feb4b84e8
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add runtime_pm ops support in drm driver instead
of direct sde_power_resource_enable/disable call.
It allows drm driver to use runtime pm refcount logic
to track the resources instead of custom implementation.
The change also removes the NRT_CLIENT support from
sde_power_handle code to simplify it further.
Change-Id: Ib14692dca5876703d0a230da2512d731b69b8ebb
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
