In WCN7850, the tlv header width is 64-bit and the tlv header
start is 8-byte aligned inside the monitor status ring desc.
Add changes to parse the monitor status ring TLV according
to the TLV header width.
Change-Id: I19860b871abbc3037174b9d0ae5ed6e52b1eb736
CRs-Fixed: 3084443
Add function pointer to update stats for LI and WKK
Add new fields in structure cdp rx stats
CRs-Fixed: 3071271
Change-Id: I6a1d7afbdfe47d171335d55bf66d210d785f5a03
Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
Moving HTT parsing to common file dp_mon.c
Initialize function pointer to stats ind handler for BE
CRs-Fixed: 3071271
Change-Id: I08fb98f8dbed075c3b49baebca399771bfb5077c
Currently dp_mon_register_intr_ops is defined conditionally
using DISABLE_MON_CONFIG macro but function call is independent of
DISABLE_MON_CONFIG which may cause compilation issue when
DISABLE_MON_CONFIG is disabled.
Fix is to add void function definition when DISABLE_MON_CONFIG
is disabled.
Change-Id: I5f0bafa1aa3560a5828500a687b8b11178ab945b
CRs-Fixed: 3084193
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
Some platforms don't have mon_register_intr_ops enabled so add
a similar macro around dp_mon_register_intr_ops to resolve
compilation issues.
Change-Id: Id9c7bb45d965005d4dd0dde3a08f254464244147
CRs-fixed: 3075651
When monitor KO not loaded Return QDF_STATUS_E_FAILURE
from dp_monitor_tx_add_to_comp_queue() so that caller
will free the buffer
Change-Id: Idebcf81121767ccd93d95308433241fcf0a93c93
Add stop timer flag to avoid resubmission of tx capture work queue timer
while del_tiimer_sync.
CRs-Fixed: 3056656
Change-Id: I72bfb6916f02297b15bb733359c0e4d7f91f0b73
- Add support htt msg for HTT_H2T_MSG_TYPE_TX_RING_SELECTION_CFG
msg configuration
- Add support for configurable length dma
per packet type for rx monitor.
- Add support for wordmask subscription for rx monitor.
- Add support for per packet msdu/mpdu logging config.
- Add support for tx monitor tlv subscription.
- Dummy APIs for 2.0 filter configuration
Change-Id: I36b18c03eff452537c2f051b24275b81ab98ebae
CRs-Fixed: 2991330
- Change to allocate BE specific monitor soc
- Allocate, initialize soc and pdev level monitor rings
- HTT srng setup for source ring
- Dummy APIs to allocate, initialize sw desc pool
Change-Id: Icf90994e7bd76017cf3c83ae00449d839967321d
CRs-Fixed: 2991298
- New data structures are added for BE monitor support
- dp_mon_soc_be - to maintain soc level BE specific fields
- dp_mon_pdev_be - to maintain pdev BE specific fields
- dp_mon_desc_pool - to maintain descriptor pool
- Monitor ops are updated for 2.0 and corresponding dummy APIs
are added.
- dp_mon_filter_srng_type is enhanced for TxMON
Change-Id: I12a2fbc53e4eecc7a191b7aa925431298d0a9f54
CRs-Fixed: 2991276
- Features common to both Li and BE and
their APIs are retained files at dp/wifi3.0/monitor.
- New monitor ops are introduced if there
is a requirement for divergence of API.
- Diverged API definitions for 1.0 are captured
in this change.
All of code in below files are moved to 1.0
- dp_rx_mon_dest.c -> 1.0/dp_rx_mon_dest_1.0.c
- dp_rx_mon_status -> 1.0/dp_rx_mon_status_1.0.c
Only Li and HMT specific are moved for below file
- dp_mon_filter.c -> 1.0/dp_mon_filter_1.0.c
- dp_mon.c -> 1.0/dp_mon_1.0.c
Change-Id: I44d163b27565b86068d80e1d97ec11d0b4a081d4
CRs-Fixed: 2991248
Currently there is an attempt to allocate monitor
peer even when the feature is disabled, thereby leading
to an attempt to allocate 0 bytes. the failure in this
allocation propagates back and prints an error message
which can be misleading.
Disable monitor peer attach when the below feature is disabled.
- WLAN_TX_PKT_CAPTURE_ENH
- FEATURE_PERPKT_INFO
Change-Id: Ifc6ba1421da0f569971fafa530bbcd3dbaa16b87
CRs-Fixed: 3036720
"Invalid peer id" prints are flooding the AP console
Adding log level as fatal to avoid these prints.
Change-Id: I773476542018389035996e45ea2f7c4cf296e9fd
Add dedicated monitor flag at SOC level and do not
enable legacy monitor rings for QCN9224
Also add flag to disable rxdma2sw ring for QCN9224.
Change-Id: I399d22d6c3361bb75ebaad4e46b156db5e628d6b
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
This patch adds the function dp_update_msdu_to_list to dp_mon_ops
struct. This is needed for supporting tx capture module in NSS
offload.
Change-Id: Id36aa6d1442eed4112585807e8798fc28ccdc424
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
PATCH[5/7]:
This patch consists following changes:
-Monitor vdev context allocation while vdev attach and free
while vdev delete
-Monitor peer context allocation while peer create and free while
peer delete
-Move monitor vdev timer function to monitor file
-Move monitor reap timer handler function to monitor file
-Move monitor timer related variables to monitor file
-Add timer init/deinit and start/stop in monitor file.
Change-Id: I9c7910671d3678c53ca9ec44a57bc10e892008d9
CRs-Fixed: 2983994
PATCH[3/7]:
This patch consists following changes:
-Move struct cdp_mon_ops to dp monitor file
-Add new function for dp monitor soc cfg initialization
-Move full monitor mode function to dp monitor file
-Move vdev set monitor mode function to dp monitor file
-Move config debug sniffer function to dp monitor file
-Move set advance monitor filter function to dp monitor file
-Set monitor delayed replenish entries for target types
Change-Id: If8dac4eedc0c8eb4e956df34c7c3adae8712c840
CRs-Fixed: 2983939
