Revīziju grafs

275 Revīzijas

Autors SHA1 Ziņojums Datums
Om Prakash Tripathi
3bfb50c7ae qcacmn: Get WMI_SERVICE_THERM_THROT capability from FW
Host enables thermal throttle depending on FW capability.
Add support to read this capability from ext service ready.

Change-Id: Ifafc24deac0bac228c98750f54e95fdfa3377a6a
CRs-Fixed: 2128049
2017-11-08 03:01:30 -08:00
Krunal Soni
3a0fd85eef qcacmn: Fix to propagate key-receiver-sequence-counter to WMI
SME module propagates KeyRSC to MAC/PE module but MAC/PE doesn't
pass this counter to WMA and due to which WMA is not able pass to
WMI module.

Add a fix to propagate KeyRSC field from MAC to WMA module and
WMA to WMI module.

CRs-Fixed: 2130765
Change-Id: I0de6907bf8aa159eccb1d8310e7027f8fdf19fff
2017-11-07 22:56:36 -08:00
Sathish Kumar
0ff69e4b19 qcacmn: Add support for periodic chan stats config command
Add support for sending periodic chan stats config command to target. Once
configured, host will receive the channel stats periodically as per the
configured period

Change-Id: Ic2b4692d0e2662ca590b925732f6cb33aac7a6de
CRs-Fixed: 2136759
2017-11-03 15:58:53 -07:00
Rajeev Kumar Sirasanagandla
ab4275dde4 qcacmn: Add support to query RCPI info
RCPI is measure of received RF power in the selected channel for a
received frame and is measured at the antenna connector and shall be
measured over an entire frame. It is a monotonically increasing,
logarithmic function of received power level.

Wlan firmware computes RCPI.

Add host support to query firmware for RCPI information of
peer mac address in sta, p2p client, softap and p2p go modes.

Change-Id: I27fe45e993bd9b157fe33ca08a56330c1c950d16
CRs-Fixed: 1093187
2017-11-01 13:56:58 -07:00
c_manjee
2772b9ca34 qcacmn: Send Grat-ARP Keep Alive request to FW
Setting Gratious ARP request through iwpriv command is
not supported.

Add condition to set Gratious ARP request as method in
Keep Alive functionality

CRs-Fixed: 1114602
Change-Id: I299d39131e7ab0ebae6bd10f41bc4549debda048
2017-10-31 17:39:07 -07:00
Gyanranjan Hazarika
dc75d1c3a8 qcacmn: Enable sending vdev-param HEOP to target
It is required to send vdev-param HEOP to the target with
updated bss-color to enable HE BSS Color feature. Add
necessary code to support this.

Change-Id: I826bc5387dad8d044abcbc9cbdf69e93b59beb39
CRs-fixed: 2126605
2017-10-29 15:25:23 -07:00
Amar Singhal
5593c900b7 qcacmn: Check for buffer overflow in event handler
Check for buffer overflow in send_log_supported_evt_cmd_tlv.

Change-Id: Ib4850ce1a7abb77025a0dc8a3cc9776f6550eb9e
CRs-Fixed: 2122746
2017-10-26 19:46:50 -07:00
Kiran Venkatappa
22a0298e36 qcacmn: Cleanup fw_abi_version handling in WMI
fw_abi_version is used in WMI to check compatabilty of host and target
WMI interface. Cleanup handling to fw_abi_version.

Change-Id: Ia78c4683b9eff06d3c052df3921c024962abd828
CRs-Fixed: 2131311
2017-10-26 04:07:56 -07:00
Varun Reddy Yeturu
7a8c33774a qcacmn: Log the debug information before freeing the buffer
Log the necessary debug information before freeing the dynamically
allocated memory while sending WMI commands
WMI_ROAM_CONFIGURE_MAWC_CMDID and WMI_NLO_CONFIGURE_MAWC_CMDID.

Change-Id: I10c8a96f8bb1a6cb661501f9ae9b9b21560980de
CRs-Fixed: 2094763
2017-10-21 06:20:35 -07:00
Vignesh Viswanathan
6ee66d3640 qcacmn: Add cmn changes for supporting flush PMKSA fw
Currently, driver sends add/delete pmksa entry to fw
whenever supplicant sends set/delete pmksa to driver.

Add support to flush all PMKSA entries as well.

Change-Id: Iace843cdf26bf06f3e70703f87c082997a78b894
CRs-Fixed: 2094234
2017-10-20 16:10:29 -07:00
Jeff Johnson
a87370f21d qcacmn: Fix camelCase issues with DHCP Offload
Both the unified DHCP offload struct dhcp_offload_info_params and all
of the function prototypes use "camelCase" which is frowned upon by
the Linux Coding Style. Replace the camelCase.

Change-Id: I3f2ce74bc150668b96b1946ef7b2d556c23dad94
CRs-Fixed: 2121485
2017-10-20 10:06:20 -07:00
Sridhar Selvaraj
411833aefe qcacmn: Fix compilation issues of FILS roaming
Fix compilation issues of FILS roaming

Change-Id: I00c8dfe7090623c2962aa209030bc1de6ba2604d
CRs-Fixed: 2096104
2017-10-18 18:28:56 -07:00
Vignesh Viswanathan
81bde49194 qcacmn: Support FILS roaming
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
  [seq number,PMK, KEK, realm] to Supplicant.

Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
2017-10-18 18:28:54 -07:00
Kiran Venkatappa
59d6e1fef8 qcacmn: Add fw build version in (ext) service event data
FW reports build number in service ready and ext_service ready event.
Save these to display FW build version during brinup.

Change-Id: Ia86a392f826c5bb836be9353e3938ab1f811ab62
CRs-Fixed: 2125667
2017-10-18 02:03:09 -07:00
Shaakir Mohamed
b8357a58eb qcacmn: Handle dfs pulse information in host side
Adds support to dump dfs pulse information from firmware to host
for debug purpose.

Change-Id: I3b2042f8df6e077eed1a3847cd2d8550794bc6f7
CRs-fixed: 2121833
2017-10-16 05:55:59 -07:00
Varun Reddy Yeturu
1339928840 qcacmn: Dump PMKID information
Dump the PMKID information in host driver for debugging purposes.

Change-Id: I0be8add08d45bc09d9120bf36eb9110600c56673
CRs-Fixed: 2111909
2017-10-14 05:59:22 -07:00
Himanshu Agarwal
eaf7d738b6 qcacmn: WMI changes to send BSS scoring params from INI to firmware
Add support to send BSS scoring params from INI to firmware.
Firmware will use these params to select best candidate during
roaming.

Change-Id: Iad0e71c770ac4f4c31ce3b19552f09fd27dc37bf
CRs-Fixed: 2121739
2017-10-12 14:22:36 -07:00
Gyanranjan Hazarika
88e11833c6 qcacmn: Add support for 'he_ltf' command
Currently, we do not have support for 'he_ltf' command. But we need
this command for certain IOP testcases. Add support for 'he_ltf'
command.

Change-Id: I296b18762aaa52da80a5755c5bcca8dbd12d9b13
CRs-fixed: 2118948
2017-10-12 14:22:30 -07:00
Manjeet Singh
cd2dc06409 qcacmn: Follow spec for NL80211_CMD_START_SCHED_SCAN
qcacld-2.0 to qca-wifi-host-cmn propagation

If no SSID are passed to NL80211_CMD_START_SCHED_SCAN cmd,
interface spec requires that an active scan is not needed.
Therefore a passive scan is now requested by cfg80211_sched_scan_request
for this case.

Change-Id: I1b1b9232ffb9d8d5c0bc9a1d75145d39c9fe9e6b
CRs-Fixed: 902092
2017-10-12 14:22:11 -07:00
Sathish Kumar
eefe27eba6 qcacmn: Add support for configuring ACK timeout pdev param
Add support in host to configure ACK timeout pdev param through
WMI interface

Change-Id: Ifc43cd146fbbf6ef818268acf69789b38b28e384
CRs-Fixed: 2042639
2017-10-12 14:21:53 -07:00
Poddar, Siddarth
79ba8202d0 qcacmn: Add wmi send multiple mcast filter api
Add wmi command api that can add/delete
multiple mcast filters.

CRs-Fixed: 2100751
Change-Id: Id253c5a3dfdf682cdca66478d9d840990f9c4a23
2017-10-12 14:21:42 -07:00
Gurumoorthi Gnanasambandhan
305aeae27f qcacmn: Initialize pdev_id for PDEV STATS request and event
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.

Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
2017-10-06 02:36:28 -07:00
Krunal Soni
7544a40193 qcacmn: During host-invoked roaming, don't to send null data to AP
During host invoked roaming, set
WMI_ROAM_INVOKE_FLAG_NO_NULL_FRAME_TO_AP
flag so that FW will not send NULL data frame while doing transition.

CRs-Fixed: 2046964
Change-Id: I043c3d2431e4da5af36fb710bd36a520550abbd3
2017-10-03 16:02:43 -07:00
Jeff Johnson
58fd0c6ce6 qcacmn: wmi: Replace instances of unadorned %p
Replace instances of unadorned %p in wmi.

Change-Id: If9a880bbfcef60be5220a17d779701724110e6b5
CRs-Fixed: 2111274
2017-10-03 16:02:28 -07:00
Edayilliam Jayadev
5d161a91a7 qcacmn: Add fields to wmi channel info event object
Populate tx frame count and mac clock frequency to the
wmi channel info event object.

CRs-Fixed: 2114541
Change-Id: I6180e377d576409705e57d7aa9172141965f79ad
2017-09-28 04:48:01 -07:00
Vignesh Viswanathan
a9497fc1ed qcacmn: Enable LCA Disallow for Background Roam Scan
Currently LCA Disallow (Last Connected AP) bitmap is hardcoded
to be enabled only for PER roam scan.

Add Background Roam Scan also to the LCA Disallow bitmap set from
host to fw.

Change-Id: I4878350ef772f168ba909fd8b30cf2aa31f68fcc
CRs-Fixed: 2109974
2017-09-25 23:42:32 -07:00
Kiran Venkatappa
7d73914da9 qcacmn: Add support of extended service bitmap handling
Extended service bitmap is used by FW to indicate supported services
bitmap for services excedding the current limitation of 128. Add support
to save and use this bitmap to check services supported in FW. Also,
change exisiting services bitmap to be dynamic allocated buffer to
optimize the buffer used to save the bitmap.

Change-Id: I24a0321bc1a06ee3aedf1c6acbc379e907bbd464
CRs-Fixed: 2103617
2017-09-23 10:32:47 -07:00
Vignesh Viswanathan
5f1ccf6b7e qcacmn: Pass new Bad RSSI threshold offset for 2G and flags to FW
Add new Bad RSSI threshold offset for 2G to 5G roam and flags
to roam_offload_scan_rssi_params and fill them in the WMI cmd TLV
to pass it to the firmware.

Change-Id: I78876f5104e67280b1342ec0957d0162edbaf502
CRs-Fixed: 2105894
2017-09-21 16:41:52 -07:00
Anurag Chouhan
97f0042e55 qcacmn: Add wmi interface command to support debug stats
Add wmi interface command to support set/get NUD debug stats.

Change-Id: I2c5e9e2f6b0bb2e7b7b0a6404e939b33bffa3f18
CRs-Fixed: 2011463
2017-09-21 16:41:48 -07:00
Neil Zhao
98ec4c4fe3 qcacmn: add useful debug prints
CRs-Fixed: 2089479
Change-Id: I3378fa874095974cd4dce771a6725eee5adc9a41
2017-09-19 17:35:33 -07:00
Jiachao Wu
b89e3bf0d3 qcacmn: Pass beacon tx rate value to FW
Set bcn_tx_rate when send WMI_VDEV_START_REQUEST_CMDID to FW.

Change-Id: I402d996fe4382d8dfd765e3bf7957d4696549b00
CRs-Fixed: 2097703
2017-09-19 04:18:27 -07:00
Varun Reddy Yeturu
7f4cff8f44 qcacmn: Pass config parameters for bad RSSI roaming to firmware
Fill the roaming parameters wmi_roam_bg_scan_roaming_param and
send them to firmware to be consumed for the background roaming
at bad RSSI

Change-Id: I08786141d28f8459aad27aaf53816ec4cdec7f08
CRs-Fixed: 2082906
2017-09-18 20:27:43 -07:00
Alok Kumar
240afea9ba qcacmn: Compile errors when a preprocessor flag is on
Fix for compile errors when QDF_DEBUG is enabled.

Change-Id: Iaf02b0588d0ae0443726621ef3884a94dc8147cc
CRs-Fixed: 2022696
2017-09-14 01:37:51 -07:00
Padma Raghunathan
1edbf23c29 qcacmn: Fix compilation errors under BIG_ENDIAN_HOST
* MIPS uses BIG_ENDIAN_HOST
* This change fixes compilation errors  uncovered during MIPS build

Change-Id: Iaedf714f36416b21eaedf586ded6f10c84a74e9c
CRs-Fixed: 2095835
2017-09-11 23:27:21 -07:00
Om Prakash Tripathi
53ed74b1ac qcacmn: Add support to fetch min and max tx power
Add support to fetch min and max tx power from target for
a given set of mcs, nss, chainmask, bw, and other rate flags.

Change-Id: Iafe082db81503a52bdc704d4b71d86d23788fddb
CRs-Fixed: 2061802
2017-09-08 15:46:56 -07:00
Sreelakshmi Konamki
d9bdeb72a0 qcacmn: Add support for PNO scan in connected state
qcacld-2.0 to qcacmn propagation

Add changes to support PNO scan in connected state to find better Ap's
based on rssi threshold, band and rssi preference.

Change-Id: I0744297cc5269f0fe37613247c911102e293d8e9
CRs-Fixed: 2000342
2017-09-08 15:46:55 -07:00
Manoj Ekbote
dd273905a1 qcacmn: Add function to extract MAC addr list
For DBDC/DBS cases, each radio will have a separate MAC
address. FW will provide the list to host in ready
event. Handler has been added to extract the list.

Change-Id: I6da96ae02a1f30995e3953358677090b84fc57c4
2017-09-06 20:56:03 -07:00
Sathish Kumar
fd414b94e9 qcacmn: Populate pdev params that are enabled in target header
Few pdev params are populated as unavailable param in the TLV layer.
Some of them are now enabled by the target. Populate the right pdev
param enum as per the definition in the converged WMI header.

Change-Id: Ia06498da9023f53035abde31c3aef2749f6b65b9
CRs-Fixed: 1115239
2017-08-31 08:54:41 -07:00
Sathish Kumar
b863315940 qcacmn: Add timestamp param and enable foreign channel exit in scan event
Add timestamp parameter in scan event received from FW to aid
in calculating dwell time and overall channel switch time in
off-channel operations.

Enable foreign channel exit event inorder to be notified
by FW through the scan event.

Change-Id: I4ba028756ee7db35f6528c0554b09c73087184a7
CRs-Fixed: 2056330
2017-08-31 00:20:20 -07:00
Soumya Bhat
8db697daf7 qcacmn: WMI support for EXT NSS Signaling
Add required WMI commands to communicate support of
EXT NSS Signaling between host and FW. Also, if
EXT NSS Signaling is supported the use new WMI to
communicate the required information between host and FW.

Change-Id: If3e1ef11a55f8fbdffddb3b10963878a6a2ca415
CRs-Fixed: 2089043
2017-08-29 20:58:30 -07:00
Sridhar Selvaraj
2c51f4f496 qcacmn: Add support for action id bitmask in allowed action frames
Currently only action category is specified to be dropped/allowed
by fw. Add support for action id bitmask per category.

Change-Id: I208af7827532740104afbb3d0e9b8dda3a8b2d47
CRs-Fixed: 2072125
2017-08-29 20:56:46 -07:00
Vikram Kandukuri
3bb482bf4a qcacmn: Update WMM params per VAP for lithium onwards
Update WMM params per VAP for lithium onwards

Change-Id: I025d8f314b255f4fa2da5c83916a122733b36c27
CRs-Fixed: 2064780
2017-08-28 08:12:03 -07:00
Varun Reddy Yeturu
c799752ca9 qcacmn: Add sanity check to avoid len overflow issue in WMI event data
In WMI/WMA, data from event buffer from FW is used without
sanity checks for upper limit in multiple places. This might
lead to a potential integer overflow further leading to buffer
corruption

Add upper bound checks for max limit of event buffer (1536)
in all affected places to prevent the potential integer
overflow

Change-Id: Ic9194a27c4a4c63fc68ff7fc61165a53e66ca4f4
CRs-Fixed: 2095545
2017-08-26 02:17:06 -07:00
Keyur Parekh
de5223472b qcacmn: Add support for wmi pktlog disable
Add API to send WMI command to FW when pktlog disable
by user.

CRs-Fixed: 2095489
Change-Id: Id5960aa9447fbee534a3c1e8a21085bc6f12dc50
2017-08-25 20:06:29 -07:00
Varun Reddy Yeturu
eac038b60d qcacmn: Configure MAWC NLO parameters to the firmware
Get the MAWC based NLO parameters from HDD/WMA and pass them
to firmware

Change-Id: I16ce12d36df7f3ccab4db32b4d7f72a0f9762795
CRs-Fixed: 2064837
2017-08-25 18:46:30 -07:00
Varun Reddy Yeturu
412601c704 qcacmn: Configure MAWC roaming parameters to firmware
Get the MAWC based roaming parameters from CSR/WMA and pass them
to firmware

Change-Id: I78a287a39715dbabcceb2cb5c4270726ba265d61
CRs-Fixed: 2064837
2017-08-25 18:46:28 -07:00
Rajeev Kumar Sirasanagandla
0f8402c0b2 qcacmn: Add support to include selective scan IEs only
qcacld-2.0 to qcacmn propagation

Add support to include only selective IEs in probe requests in
order to improve user's privacy.

Change-Id: I59cf4181f60f5b4cd87a32fbcf29160d87ca59c8
CRs-Fixed: 1105495
2017-08-19 01:27:07 -07:00
Kiran Venkatappa
da3eae632c qcacmn: Update chaninfo extract API for TLV target
FW implementation is updated to add more fields in chan info event.
Update host implementation to extract these fields.

Change-Id: I4935f3aa1c2e87d27a13a29651db8d8835cb4f91
CRs-Fixed: 2090787
2017-08-18 17:46:43 -07:00
Varun Reddy Yeturu
6ef9a658f0 qcacmn: Fill rssi_thresh_offset_5g in WMI
Fill rssi_thresh_offset_5g in WMI to configure this
value into the target

Change-Id: I0e5dde987fcc9fbb1f0556ec6f195d0a5ada4ffe
CRs-Fixed: 2093335
2017-08-16 17:36:53 -07:00
Karunakar Dasineni
39a5ff7822 qcacmn: Enable per TID AMPDU and AMSDU WMI params
Enable WMI PDEV parameters to configure per TID AMPDU and AMSDU in TLV implementation

Change-Id: I12982e78f880bf9bf8858aaa99aa416d7f775c17
CRs-Fixed:2089935
2017-08-15 16:27:54 -07:00