Currently the dynamic bit clock switch trigger for command mode
is supported via sysfs node. This might lead to unnecessary
race conditions, when dsi driver is enabling the dsi bit clock
as part of commit and at the same time if bit rate change via
sysfs happens. So make the trigger happens via kernel mode set
call as done for video mode.
Change-Id: I17acb408d2b6dbd6fa41994e56262e31e43d088b
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
This change adds support for dynamic switching of dsi clocks
to avoid RF interference issues. Also with dynamic dsi clock
switch feature coming into picture, now populate the supported
refresh rate as list instead of providing a range. Modify the
logic to enumerate all the modes in dsi driver, taking dynamic
bit clocks, resolutions and refresh rates into account.
Change-Id: I5b6e62bc935cf2234bdd96fcb3c7537b4e735fff
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
Primary and secondary displays should have first priority
when reserving lms. Static reservation can potentially block
higher resolutions for the required displays. This patch gets
the layer mixer requirement for primary or secondary display
if available. It reserves those layer mixers dynamically
for the respective display when connector is registered.
Change-Id: Id69dac4c72d6b20008049f4aeb71c0f97d0a426b
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add support to selectively enable clock gating for supported
DSI clocks using a new debugfs node - config_clk_gating. This
new node would be created for every display node. See below
for usage examples:
To enable clock gating only for BYTE clock:
echo 1 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for PIXEL clock:
echo 2 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for PHY clock:
echo 4 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for all clock:
echo 7 > /sys/kernel/debug/<display_name>/config_clock_gating
To disable clock gating for all clocks:
echo 8 > /sys/kernel/debug/<display_name>/config_clock_gating
To go back to default setting:
echo 0 > /sys/kernel/debug/<display_name>/config_clock_gating
Change-Id: I83713d86eb1b9675d40d51fc20de81cca0aeb1c0
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
If we set esd check mode as TE signal check for video mode panels
the panel will be continuously reset. This change doesn't allow
TE signal check as ESD check mode.
Change-Id: I42a09d605b259d9f06c67cb126d3684ed4489699
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change fixes the invalid memory access. It allocates
enough memory so that out of bounds access is avoided.
Change-Id: I0749eac54cfa91891a4377b99fbd7f24dd3bd02a
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Change updates dsi clock calculations for command mode
as per recommendation. Now dsi clocks are tied to
frame transer time. Propagate correct frame transfer
time to hal to update mdp clocks and bandwidth needed
accordingly.
Change-Id: I46f9038622ddd47cc53c5f3d54229f69a7008c8a
Signed-off-by: Vara Reddy <varar@codeaurora.org>
DSI display may support video mode and command mode both and it may
support transition between these two modes.
This change adds seamless transition between these two modes for DSI
display by avoiding crtc enable/disable and panel power on/off
during modeset.
Change-Id: Id7ddaef7d1f0f7cc7d52283755bad53a246adec6
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Add runtime_pm ops support in drm driver instead
of direct sde_power_resource_enable/disable call.
It allows drm driver to use runtime pm refcount logic
to track the resources instead of custom implementation.
The change also removes the NRT_CLIENT support from
sde_power_handle code to simplify it further.
Change-Id: Ib14692dca5876703d0a230da2512d731b69b8ebb
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
