Extraction APIs for few WMI events were implemented, for which the
TLV event ids need to be populated.
Populate TLV event ids for the following events -
WMI_PDEV_CHANNEL_HOPPING_EVENTID
WMI_PDEV_TPC_EVENTID
WMI_WDS_PEER_EVENTID
WMI_PEER_STA_PS_STATECHG_EVENTID
WMI_INST_RSSI_STATS_EVENTID
Change-Id: I3defb120b9bd5a2fa3fdad1b84d201727c0b3f30
CRs-Fixed: 1115239
Converged FW has few left-over WIN specfic WMI CMDs that need to be
implemented in TLV method.
WMI CMDs implemented through this change -
WMI_PDEV_SET_QUIET_MODE_CMDID
WMI_PEER_MCAST_GROUP_CMDID
WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID
WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID
WMI_PEER_BWF_REQUEST_CMDID
WMI_PDEV_QVIT_CMDID
WMI_PDEV_SET_WMM_PARAMS_CMDID
Change-Id: Ia2ae3d2e56608fd4c51754ae2c78f2b9912d7172
CRs-Fixed: 1115239
Fix the population of tx power. Also fix the WMI TLV processing
for regulatory channel list event. Also make sure correct
range enums are calculated for pdev range.
Change-Id: Iec9559c0ab4b2b5e52d0b0a3eb4a0e8d038dc791
CRs-Fixed: 2002892
Add pdev_id extraction code for FIPS, TPC and channel hopping WMI
events. pdev_id is used to derive pdev object.
Change-Id: I1ed527cd96cb6f2326202d1a37ab43285f050a72
CRs-Fixed: 2003898
Emulation being clocked at lowest rate,
SCAN and serialization timers are modified to handle
these scenarios
Change-Id: Ia937930483dbcd0268fd2fe2d0393e49f09b215f
CRs-Fixed: 2009490
Due to different layers, TLV processing is confined to WMI folder.
Therefore, move the TLV layer processing of WMI_REG_CHAN_LIST_EVENTID
to the wmi folder.
Change-Id: I7e7182997a9506035030f33d2f81a403fbe97a2f
CR-Fixed: 2019750
Add changes for peer association by adding support to
include HE capabilities and HE operation information
in vdev start and peer assoc WMI commands.
Change-Id: I50c0241f872219e08ee2d231c907309ee5adceef
CRs-Fixed: 1073481
Defines API and callbacks of os interface for P2P component. At the
same time, defines API of target interface.
Change-Id: Ice1c86ecba1f2410d965d9f84923589f229a1864
CRs-Fixed: 2013763
Include cac duration and regulatory domain in vdev start
command, these fields are used to process phyerrors when
dfs is offloaded to firmware.
Change-Id: I5736354913fafb7776ac71e85dc23e841de94a96
CRs-Fixed: 2017481
Add support to pass delay_start_time to firmware, this delay will be
used before starting the first scan cycle.
Change-Id: I7488fc8da4e22b170e52fb38c8a1d5b49dbf7e2f
CRs-Fixed: 2014142
Remove WMI VDEV param population for HE ofdma_cplen
command. Instead use the same old short_gi command
for HE ofdma cplen.
Change-Id: Id303dab1c7ec47ebc31fc685ad0b50ddfdf4fcac
CRs-Fixed: 2009118
Curretly FW considers minimum time of hysteresis for PER based roam as
constant value which is 25 seconds.
Add changes to make this time configurable using ini.
Change-Id: Iadb5f6a005b069e0d6190df34e382927425ec1af
CRs-Fixed: 2005849
Currently driver enables both Tx and Rx based PER based roam for
a single value in configuration.
Add changes to enable/disable Tx and Rx based monitoring
individually.
CRs-Fixed: 1114094
Change-Id: I52768029d3ccf007b7d9999e796de3366ac0ae35
DUT should be able to roam to a better access point if current
AP is having congestion/packet error.
This roam also devise a new selection logic for candidate
selection which considers channel congestion and AP capabilities.
Change-Id: I6cffbf0de059a218e971be32fbdc1a0092ceea9d
CRs-Fixed: 1090934
Active Mode Berkeley Packet Filter (Active BPF) is a new feature that
allows firmware to apply BPF even while the Apps processor is active.
There are 3 modes:
* Disabled: do not apply BPF in active mode
* Enabled: apply BPF to all packets in active mode
* Adaptive: apply BPF up to some threshold to avoid performance impact
Add WMI APIs and related logic to support configuration of Active BPF
Mode.
Change-Id: I8c0778b3fa73d148422aa103b0fc0950433fec95
CRs-Fixed: 1111400
Channel information TLV pointer is not updated to the data offset once
TLV header is set. Fix by moving the pointer ahead by TLV header size.
Change-Id: I3c8ad7b690153745d92d51e4d9d1e377b149e1d2
CRs-Fixed: 2000449
Converged FW has few left-over WIN specfic WMI CMDs that need to be
implemented in TLV method.
WMI CMDs implemented through this change -
WMI_GPIO_CONFIG_CMDID
WMI_GPIO_OUTPUT_CMDID
WMI_PDEV_DFS_DISABLE_CMDID
WMI_PDEV_DFS_ENABLE_CMDID
WMI_PDEV_GET_NFCAL_POWER_CMDID
WMI_PDEV_SET_HT_CAP_IE_CMDID
WMI_PDEV_SET_VHT_CAP_IE_CMDID
Change-Id: Iad5532b305fae12f4eb8265cf9a662578041d06e
CRs-Fixed: 1115239
Converged FW has few left-over WIN specfic WMI events that need to be
implemented in TLV method.
WMI Extraction APIs implemented through this change -
WMI_PDEV_CHANNEL_HOPPING_EVENTID
WMI_PDEV_TPC_EVENTID
WMI_WDS_PEER_EVENTID
WMI_PEER_STA_PS_STATECHG_EVENTID
WMI_INST_RSSI_STATS_EVENTID
Change-Id: I7d312e40023fb10f71953b34d16b10ddf2a82f9c
CRs-Fixed: 1115239
Converged FW has few left-over WIN specfic WMI CMDs that need to be
implemented in TLV method.
WMI CMDs implemented through this change -
WMI_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID
WMI_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID
WMI_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID
WMI_PEER_ATF_REQUEST_CMDID
WMI_FWTEST_CMDID
WMI_QBOOST_CFG_CMDID
Change-Id: Ice617f7adf387d534edaefd24857c253c937de48
CRs-Fixed: 1115239
Converged FW has few left-over WIN specfic WMI CMDs that need to be
implemented in TLV method.
WMI CMDs implemented through this change -
WMI_PDEV_SMART_ANT_ENABLE_CMDID
WMI_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID
WMI_PDEV_SET_CTL_TABLE_CMDID
WMI_PDEV_SET_MIMOGAIN_TABLE_CMDID
WMI_PDEV_GET_TPC_CMDID
WMI_VDEV_RATEMASK_CMDID
WMI_VDEV_SET_DSCP_TID_MAP_CMDID
WMI_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID
WMI_PEER_UPDATE_WDS_ENTRY_CMDID
WMI_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID
Change-Id: I6e59bcb948a7368729df35d19c3d5a03a0075a15
CRs-Fixed: 1115239
Add or update WDS peer entry whenever source address of the
received pkt does not match with the peer table entries.
Change-Id: I7798a5b795777451f534be7d25d5f9b930f5c305
CRs-Fixed: 1117405
Object manager psoc service ready api provides host (ext)service ready
data structures hence remove duplicate copy from wmi_unified_param.h
and change WMI to use psoc service ready data structures.
Change-Id: Iaec20e9b818077ed1ca58754c4b1bc6deaedd761
CRs-Fixed: 2002016
Currently, Host maintain multiple data structure at different
layers for offload related features like arp/ns/gtk etc.
Instead of using many structure use single data structure across
all layers for offload related feature (arp/ns/gtk) which is now
exposed by PMO. Hence to include PMO header's in WMI, refactor the
WMI code for PMO component by carving out PMO specific functionality
separatley.
Change-Id: I8314d5ece49bf6972fbe706d635385ae22d11b2e
CRs-Fixed: 2004523
Added host WMI VDEV param enumerations for new HE
commands Populated VDEV param TLV with WMI VDEV
commands ids for all the new HE commands.
Change-Id: Id9905176c7565dfa0dd56800b61b7c620136a4e7
CRs-Fixed: 2009118
Add HE Mac, PHY , MCS , OP & PPET in peer_assoc_params
structure. Add HE PHY & PPET in wmi_host_mac_phy_caps
structure. Populate HE params while sending WMI Peer
assoc commands.Parse HE Phy & PPET while parsing Mac
Phy TLV in Service ready extension event.Add required
changes in psoc_service_ready header files.
Change-Id: Ia2fc7f54634a7a0c98996e361e38b11b3b74a7a0
CRs-Fixed: 2009118
Older FW does not send all TLVs in extended service ready message. Add
NULL check before accessing these TLVs. Also fix return type to
QDF_STATUS in TLV extract APIs.
Change-Id: If9f4d961858e2011d73258ba090e37bc757536df
CRs-Fixed: 2011238
Add multiple vdev restart command request WMI command API and
extraction API for CSA count status event to support CSA implementation
for beacon offload.
Change-Id: Ic309f592137dc725e04590dc0093f30b481ebf9b
CRs-Fixed: 2000449
Added support for wmi_pdev_param_mesh_mcast_enable and
WMI_SERVICE_ENTERPRISE_MESH
Change-Id: Ie0ce2b822843d66aa14fe0a46809a78e9143f5d9
CRs-Fixed: 2003389
API to handle pkts received on vdev which has RAW mode
enabled. Currently supports only MPDU with single MSDU.
Change-Id: Ife00699646bd97c5de0021fc32db434a544058f6
CRs-Fixed: 1111781
Scan params are not properly set when wps ie is added in probe req
scan command fails. Fixing scan wmi command when additional
wps ie is added.
Change-Id: Ide40a248f32c6220dd7510a65dde7c3894e45da6
Send beacon frame in wmi_roam_invoke_cmd to firmware
This helps firmware skip scan to connect to requested
BSSID.
Change-Id: I5c6e375309dcb3bdd6430a3d501bade5cfe2e88d
CRs-Fixed: 1116901
Firmware requires WMI commands to be sent on different copy engine for
each MAC. Add support in WMI to use different endpoints for each pdev.
Change-Id: Ie0dfe71043275ac694362f88b625219f089b5303
CRs-Fixed: 2005214
Support to add hw_mode in init command is added by FW
to let host choose the mode to be use. Change init cmd
send API to enable upper layer to send the hw_mode selected.
Since this is new TLV in init command, init cmd send API
needs to be changed to accommodate this parameter.
Change-Id: I172d8d737425599c36666d9fec8a6cdd48085097
CRs-Fixed: 2004652
Add regdomain send command in tlv.c.
pdev_id is required to indicate the pdev object on which command needs
to be applied. Add pdev-id in regdomain command in TLV.
Change-Id: I6a2c3453a2c058c6fb4cfab2f57c1fbce628aad7
CRs-Fixed: 2003898
pdev_id is used to get the pdev for which the event is recieved. Add this
in extract APIs to fetch the pdev from pdev_ids and use it for further
processing. This is change is part of changes required to support
multi-radio.
Change-Id: Iadda098ccb31be5e8e43083158802abe49ac01b4
CRs-Fixed: 2003898
