Add vendor handoff service bit capability support
WLAN_SOC_VENDOR_HANDOFF_CONTROL to check whether the FW
supports vendor handoff feature or not.
Change-Id: Ifdf541761716df9ca5b764c05714a8b501642354
CRs-Fixed: 3224573
Add new flag CONNECTIVITY_PKTLOG to make independent of
FEATURE_PKTLOG and REMOVE_PKT_LOG for packet logging.
This is because 32 tx/rx pkt logging is connection related
and this feature is independent of pkt log feature. Here
driver will send first 32 tx/rx pkts consisting of mgmt
and data pkts to userspace which can be used for debugging
Change-Id: If987ac8b6cb10b464a4ec2ace1c55215c0aa3614
CRs-Fixed: 3222970
This reverts commit I293647175c151da0fd6628345f98ea65c83b1bb3.
New solution idle shutdown in suspend prepare is better.
Change-Id: I69a0e7401c811e4a9656fcc8e3dd069f4317cc35
CRs-Fixed: 3213236
This enables configuration from user if and when the stale
packets from peer TID queues can be flushed.
Change-Id: Ic7427cdb8b70eeefea1b99d1f9be505a9cae76e6
CRs-Fixed: 3130419
The Android Common Kernel (ACK) accepted change [1] to 5.10.20 which
enables support for nested composite objects in the Kbuild
system. This was introduced to fix the "Argument list too long" error
that can occur when there are too many filenames passed by the build
system to the "ar" command.
The expectation at that time was that this patch would be maintained
for all future ACK kernels. However the ACK maintenance team has
decided not to maintain this patch beyond the 5.10 kernel, so update
the logic that determines if an ACK kernel has support for the
feature.
Subsequent changes will need to be made to address the "Argument list
too long" error when using an ACK that does not have this support.
[1] 21c713f8e8
Change-Id: Ief9a74a24d58796a90e19bd86fa269e64bcf4c73
CRs-Fixed: 3139401
As part of protected dynamic interface control feature,
if the user space disables WiFi, then the platform driver
disables the WLAN HW as well. Until the user enables WiFi,
the WLAN HW stays disabled.
So, add support to enable the WLAN HW, when the WiFi is
enabled by user space.
Change-Id: If6b90ae57c4471f4c613ead8310fd0a7ada818f3
CRs-Fixed: 3215335
Add config file for Mango WLAN device and enable emulation flag for
Mango WLAN device.
In addition, use static symbolic link '.mango -> .' for multi-ko support.
Change-Id: I0cebf11407e5625fd6475723496b9cda72cf5165
CRs-Fixed: 3210120
This change updates the auth_status and mac address of
roamed peer received in roam_sync_indication from FW to dp.
Change-Id: I27744017c87a956927108c5b3b0f9220d7e42965
CRs-Fixed: 3185110
When build kiwi_v2 driver, it reports below error
"make[3]: /bin/sh: Argument list too long". It's because when ar
process kiwi_v2.o, current driver generates too many characters which
over bash's limitation, so create sme.c file to includes all sme layer
common files to save some room.
Change-Id: Ib15fcb29efd6d06d48d305dcfac44de258dba259
CRs-Fixed: 3194081
As part of protected dynamic interface control feature, add
infra to disable/enable wifi, when invoked from user space.
Change-Id: I3f6c2abcef1ef89cbd0a735820de9b54d37bfa29
CRs-Fixed: 3166467
Add multi-client latency level service bit capability support,
WLAN_SOC_WLM_MULTI_CLIENT_LL_SUPPORT, to check whether the FW
supports multi-client latency level event or not.
Add INI "wlm_multi_client_ll feature" to enable/disable multi
client latency level feature from the host side.
* @min: 0
* @max: 1
* @default: 0
If firmware sends multi-client latency level service
bit capability to host and host enables multi-client latency
level feature via INI, the host waits for an event
WMI_VDEV_LATENCY_LEVEL_EVENTID as a response to a request
command WMI_WLM_CONFIG_CMDID.
Change-Id: I5cbea89e67caabac5db70b7f0a91c18bdd512e9b
CRs-Fixed: 3180928
On Wear HL based target with keystone kernel, it generates
WLAN driver with name "qca_cld3_wlan.ko" based on macro
definition WLAN_WEAR_CHIPSET. But the driver was not loading
because of the old INI path and /dev path.
This commit modifies the INI path and /dev path based on
macro defined i.e. WLAN_WEAR_CHIPSET.
Change-Id: I6d457a3bb708de3175c40b0f2b3ba0ebde915838
CRs-Fixed: 3168115
Currently wmi_roam_event_id event handler only register under feature
WLAN_FEATURE_ROAM_OFFLOAD, but it's needed for LFR2 roaming too. So
refine roam event processing for LFR2/LFR3.
Change-Id: Ic07fd8a543142fc1e151f484979ab99ff55ce802
CRs-Fixed: 3161973
Remove the old SAP-CSR flow for start bss, stop bss and
channel change req processing which is disabled currently
under the SAP_CP_CLEANUP macro.
Cleanup the redundant checks in the deauth, disassoc
response processing in CSR.
Change-Id: I5a360fc267688b51ca645551108b65646a3c8c1a
CRs-Fixed: 3164259
Kiwi target does not use the TX credit cmd ring and the
TX status ring.
Hence disable these srngs for Kiwi target.
Change-Id: I2473aad5b16316e3033c7d7ee9f81ee518dd2097
CRs-Fixed: 3157132
Add new sysfs entry to enable or disable capture of
datapath tx delay stats per vdev.
Enable HW_TX_DELAY_STATS config flag for Lithium targets
to support capture of tx delay stats at runtime.
Change-Id: I838961daf27e08c4b6e693852c62f9f894f499a5
CRs-Fixed: 2981004
Enable source port learning for SAP to add AST entry for the
remote stations with next hop. The SAP should use 4-address
frame format for the remote destinations.
Add support to handle data packets for WDS destination.
Change-Id: I6002e6dd9c9bb2c7b2e4f85bf06156dbb7feebee
CRs-Fixed: 2997812
Call the Wifi Pos API to advertise 11az security
related wiphy ext flags. Add Kbuild changes for new
file to advertise Wiphy Feature flag.
Change-Id: Id8c9c51770c3153c9c8a140f965249d1b0d1a844
CRs-Fixed: 3150582
Enable feature DP_RX_DELIVER_ALL_OOR_FRAMES for lithium DP
which will allow all OOR frames to stack.
Change-Id: I3ad59fc3b3fc8e70b2f05a7cfa23e2646c1e03a4
CRs-Fixed: 3152334
Remove CONFIG_WLAN_FEATURE_REDUCE_RX_THREADS compile flag.
Keep num rx_thread dependent on rx REO rings, 1 rx_thread for
each rx REO ring. It is controlled via INI dp_reo_rings_map.
Change-Id: I701e5cec79a8968b540c9437fe297ca1db8cd5d3
CRs-Fixed: 3048265
Rename files with blacklist/whitelist to denylist/whitelist.
Rename files with blm to dlm.
Change-Id: Ief7ce0a797f74460c9708f8d2dd440412af5b7eb
CRs-Fixed: 3099864
When build kiwi_v2 driver, it reports below error
"make[3]: /bin/sh: Argument list too long". It's because when ar
process kiwi_v2.o, current driver generates too many characters which
over bash's limitation, so create lim.c file to includes all lim layer
common files to save some room.
Change-Id: Ic4a1a71ebc9e42fde5e1a11b5342a7f17a9e0d91
CRs-Fixed: 3138823
Add feature flag to support marking first packet after wow wakeup
and enable it for QCA6490.
Change-Id: Icbda6dabe61a113a8aaa87f7a8fd1d95555226a1
CRs-Fixed: 3137627
Add chip version info in driver structure, platform driver
can use this info to decide whether accept this registration or not.
Change-Id: I37ba897954147ad75515f88e7ff35417e5de39e4
CRs-Fixed: 3125766
Currently refill thread is not getting chance to update
refill buffer pool, which is causing the increase in
rx thread time.
To fix issue move refill thread to performace cluster.
Change-Id: I839352ff09da692f801e97f7938a67ab8f09742b
CRs-Fixed: 3138081
Set the new macro CONFIG_REG_6G_PWRMODE for all targets. This enables
the new for power mode APIs which will replace the for freq APIs.
Change-Id: Ibb17616fdfc8bd110b3a68b4636c9b3c1bc9ca97
CRs-Fixed: 3136314
Disable monitor mode on sdx65, it will save 5MB buf,
and improve iperf performance.
Disable WIFI_MONITOR_SUPPORT for pdev/vdev/peer do
nothing of monitor mode.
Enable MONITOR_MODULARIZED_ENABLE for monitor_soc
attach do nothing.
Disable QCA_MONITOR_PKT_SUPPORT for monitor ring
which are not initialized in dp_queue_mon_ring_stats.
Change-Id: I9865ad38dbbee56abee567fded17f39ee299ac42
CRs-Fixed: 3069269
Enable the support to parse the common user info from
the tlv in monitor status ring for KIWI.
Change-Id: Id54817efb65c005578c7cc28286feabde1bea652
CRs-Fixed: 3129126
