Add support in wmi to handle below new RTT PASN events:
WMI_RTT_PASN_PEER_DELETE_EVENTID
WMI_RTT_PASN_PEER_CREATE_REQ_EVENTID
Change-Id: Ib33c2def2d7ef66a6a2717e2a8e1756ab4318e4d
CRs-Fixed: 3150069
Add WMI changes to send TID-to-link mapping to FW as part of peer assoc
command and as part of WMI_PEER_TID_TO_LINK_MAP_CMDID.
Change-Id: Ia3a8fb10d49e1d54d6f4f418be3f684bc0147c5c
CRs-Fixed: 3183734
cal version is included in EXT2 svc ready message to indicate the bdf
and ftm version to host. Add API to extract this from ext2 message.
Change-Id: I83f4d6e83a3f78f993b40527aed7291c6496777c
CRs-Fixed: 3182634
WMI op extract_roam_event is also needed to extract roam event
of LFR2, so let it enabled for LFR2/3 both.
Due to struct roam_offload_roam_event is only defined for MCC,
add MCC specific macro CONN_MGR_ADV_FEATURE to protect it.
Change-Id: Ie9724ee578feb60ada30fe75ed3f155a2bbe77a9
CRs-Fixed: 3167557
Copy software image version, chip information,
pktlog json version and pdev id from the event received
from firmware.
Change-Id: I53c2fceee129fa69126ae8214fb652a744bfcbfa
CRs-Fixed: 3165004
Add WMI support to set PN Rx Filter which is used to forward
frames to host upon PN failure.
Change-Id: Ib32abc681e17e1a6189a295314a497fc0c21b15a
CRs-Fixed: 3150832
Add WMI ops for SAWF WMI commands
1. Config service class
2. Disable service class
CRs-Fixed: 3118070
Change-Id: Ie21fcfb1f25d2195eee679307e8970ccdda9992f
Extract information from wmi event wmi_vdev_quiet_offload_eventid and
send it to mlme
Change-Id: I49ef7f2811c5975a95e8e33050977c49e2b104e4
CRs-Fixed: 3101974
Currently, WMI APIs do not support new TWT public structures.
If the TWT componentization feature is enabled, then extend the WMI APIs
with TWT componentization structs.
Change-Id: Ic987960e880376066b81881dc32ec96faf609cc6
CRs-Fixed: 3085377
- Add wmi pdev param ids.
- Add wmi ops to send set retry thresold, mcs drop value
and probe intervals.
Change-Id: Ic316337244e8fab07e7ed214c5fe62bf43a827d4
CRS-Fixed: 3126266
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicated the different capabilities of the Spectral HW block.
Add support to extract the fixed parameters from this event.
Change-Id: Ib13108f078de008b6a76a25a010e85a7fdb6f5fe
CRs-Fixed: 3098203
Currently, VDEV manager responses are using legacy path instead of
target_if, vdev_mgr and os_if components. As the driver implementation
is planned for converged model, legacy implementation will be moved to
the respective components.
To avoid rework, Use target_if, vdev_mgr and os_if components to process
the FW responses corresponding to the vdev manager.
Change-Id: I778f6de93481fc730383e8f8e1c604f173947d69
CRs-Fixed: 3093776
As part of new enhancements, driver is supporting MAC address update
after VDE creation in the FW. To support this feature add WMI support
to send MAC address command to the FW.
Change-Id: Ie4b7291520793c8aa501fefccaf7b91ab22e9054
CRs-Fixed: 3084119
WMI includes are not part of include path in some WIN projects,
move MLO related common definitions to wlan_mlo_mgr_public_structs.h.
Change-Id: If63c82bc15a2a0e0a045be896b74ea9addb3a64d
CRs-Fixed: 3083776
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: I8537147104f30b74ffb2e87946f2e5f4b129f0df
CRs-Fixed: 3075460
Add support to extract the freq, cfreq1, cfreq2, PHY mode, Destination
macaddr, and channel BW values from the RTT measurement request buffer
received from the LOWI application. Pass these values to a registered
callback. Users can use these values to make some decisions on the RTT
scan.
Change-Id: Idb2232c07bbfa2946dc01e75908b9a6036597ecf
CRs-Fixed: 3060685
Add new wmi ops extract_inst_rssi_stats_resp to extract instantaneous
rssi stats resp.
Change-Id: Idce8a5fb0036145aa14682997ca5101666772c70
CRs-Fixed: 3058799
Waikiki facilitates a dedicated CE (CE14) for
direct DMA & diag handling purpose. Changes to
register the respective service handler to process
DBR and DIAG events from the target.
CRs-Fixed: 3057986
Change-Id: I4ae1d5676ac702d1f28f3e4031b47ffcd1d2ad7e
Add support for extracting SBS Lower Band
End freq from rx service ready event.
Change-Id: I402d7519507fbce733a000a546473aa00e8844d5
CRs-Fixed: 3065158
This change introduces the new roam set param WMI command to set
the roam params from host to FW.
Also added a fail_bssid param in wmi_roam_result TLV to know the
roam failed AP BSSID from the FW.
Added a new vendor command event for sending roam events stats
attributes to userspace.
Change-Id: I7a08635a7912cbd940d90a2d62433296740ad913
CRs-Fixed: 3050799
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: Ib695a0e5d032af4be27fef59f3c5123a35428d7d
CRs-Fixed: 3046987
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: Id3171956028d6086f85eac73865c37498926d6cc
CRs-Fixed: 3049946
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
FW sends Spectral scan chan info TLV in WMI_PDEV_SSCAN_FW_PARAM_EVENTID
event to indicate the channel information for a spectral scan session.
Add support to process the TLV and update the spectral host data structures
accordingly.
CRs-Fixed: 3044162
Change-Id: Ibbf7f6bbbb267123bbdf44bcfffa2cfb1c2926df
Add host WMI APIs to send WMI_PEER_ADD_WDS_ENTRY_CMDID,
WMI_PEER_REMOVE_WDS_ENTRY_CMDID, and WMI_PEER_UPDATE_WDS_ENTRY_CMDID
to the Fw.
Change-Id: I32afdac7c366b647ee3196bcb76531295e640b8b
CRs-Fixed: 2997227
Add extract_roam_pmkid_request to wmi_ops to allow cld driver
to register the corresponding callback.
Change-Id: Ifa9cd73d6d62e7411b78b15086d7e166559f6d1c
CRs-Fixed: 3014249
