UMAC reset prerequisite setup command contains the following information.
- Interrupt number to be used for raising the UMAC reset interrupt
- Address of the shared memory
This is an HTT command. Send this command as part of the UMAC reset
initialization sequence.
Change-Id: I7a08f48b420580b5e3dbb9b46f6605d986f8fd89
CRs-Fixed: 3244930
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
In Beryllium architecture, PPDU_START_USER_INFO TLV carries
the user specific info for each user in a given ppdu.
Add subscription for this TLV by host for enhanced stats use case.
Change-Id: Ia12c5c3ab36198e7cd40dad0c0d92b945d2b49c6
CRs-Fixed: 3166305
Parse the tqm bypass frames packet count and byte count and consider
them for stats updation in the vdev.
Change-Id: I644eb9819b8a68fbf9da2e2f2588c80dfaa61fa5
CRs-Fixed: 3163215
Remove redundant field for rxmon global enable
and fix writing global enable field to correct
dword
Change-Id: I4efc0da559dce873bcb8721aeb0d7b7410b39dd9
CRs-Fixed: 3150784
Add the DP HTT RxDMA and RxOLE data types and their
respective configuration APIs.
Change-Id: I4ce423a31eab84764666b7d0f11815f4895898af
CRs-Fixed: 3147720
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
Moving HTT parsing to common file dp_mon.c
Initialize function pointer to stats ind handler for BE
CRs-Fixed: 3071271
Change-Id: I08fb98f8dbed075c3b49baebca399771bfb5077c
Offsets used by host for HTT stats are not aligned as per the
structure declaration given in file htt.h .
Make change to use the correct offsets to get the correct stats.
Also make change for byte count computation.
Also make cleanup changes for FR65817.
Change-Id: I8bc6164cc4994c49536d7277779f25b258be1592
CRs-Fixed: 3082742
Define the interface for Host and FW communication required for
configuration of HW vdev stats in BE architecture and add handler
for vdev stats received from FW.
Change-Id: I5f6a703596bd1fbb5e27e6261befda25aa0c3e12
CRs-Fixed: 3067843
- Add support htt msg for HTT_H2T_MSG_TYPE_TX_RING_SELECTION_CFG
msg configuration
- Add support for configurable length dma
per packet type for rx monitor.
- Add support for wordmask subscription for rx monitor.
- Add support for per packet msdu/mpdu logging config.
- Add support for tx monitor tlv subscription.
- Dummy APIs for 2.0 filter configuration
Change-Id: I36b18c03eff452537c2f051b24275b81ab98ebae
CRs-Fixed: 2991330
- New data structures are added for BE monitor support
- dp_mon_soc_be - to maintain soc level BE specific fields
- dp_mon_pdev_be - to maintain pdev BE specific fields
- dp_mon_desc_pool - to maintain descriptor pool
- Monitor ops are updated for 2.0 and corresponding dummy APIs
are added.
- dp_mon_filter_srng_type is enhanced for TxMON
Change-Id: I12a2fbc53e4eecc7a191b7aa925431298d0a9f54
CRs-Fixed: 2991276
PATCH[5/7]:
This patch consists following changes:
-Monitor vdev context allocation while vdev attach and free
while vdev delete
-Monitor peer context allocation while peer create and free while
peer delete
-Move monitor vdev timer function to monitor file
-Move monitor reap timer handler function to monitor file
-Move monitor timer related variables to monitor file
-Add timer init/deinit and start/stop in monitor file.
Change-Id: I9c7910671d3678c53ca9ec44a57bc10e892008d9
CRs-Fixed: 2983994
In Tx monitor code, BSS color needs to be retrieved
from the PPDU TLV so that it matches the value in
transmitted packet.
Change-Id: I6e1dce3992264ebea2db37b2d9c8f156a23df028
HTC packets were mapped but not unmapped or freed. As part of
hdd_wlan_stop_modules(), all nbufs will be freed in misclist
and TxQueue.
Adding debug change to count number of htc packets failed to
send and count number of nbufs in misclist are skipped when
freeing them.
Change-Id: I868621a67cf89d9b84e202843990f576973ec334
CRs-Fixed: 2807407
HTC runtime count is incremented after posting the HTT
ver req message to CE4. There could be possibility of
processing the ver response message from FW even before
htc_runtime_cnt is incremented. This can casue RTPM put
to not happen causing imbalance in get/put count.
Fix is to increment htc_runtime_cnt before enqueuing
the HTT message to CE.
Change-Id: Ib9b69910cd14193c41ecfee804b390f8a6cdef49
CRs-Fixed: 2794451
Do a logical split of dp_soc_attach and
dp_pdev_attach into Allocation and initialization
and dp_soc_detach and dp_pdev_detach into
de-initialization and free routines
Change-Id: I23bdca0ca86db42a4d0b2554cd60d99bb207a647
Is some cases, FW wants to adjust BA session parameters
FW sends a HTT event and HOST helps to send out DELBA
and modify BA win size in the next round of ADDBA req/resp
exchange to reduce following RX AMPDU aggr-size
Change-Id: I97777ff59a18346f2cd4e2e562c8ae6acdcd69d7
CRs-Fixed: 2644641
Add following changes:
a. Add CDP API to config full monitor mode
b. HTT configuration changes
c. Init/Deinit changes for full monitor mode resources
CRs-Fixed: 2632442
Change-Id: I06db5194031b3ea0f0c1e5deda20df4bc0faa0b9
Macro ATH_11AC_TXCOMPACT is defined, so CE4 sending completion will
not free the related htt_htc packets. Currently it depends on
htt_soc->htt_htc_pkt_misclist to free them once this kind of htt_htc
is no longer sitting in CE4 source ring which means CE sending
completion is done already. misclist will free the old/tail of
htt_htc packets if there is > 256 htt_htc packet is pending in list,
but CE4 source ring has 2048 entries, for extreme case, if CE4 sending
is blocking and > 256 htt_htc packets is pending in CE4,
misclist will free the tail htt_htc packet, but later CE4 sending
completion is coming, invalid access to htt_htc packets will happen.
Enlarge misclist trim threshold > 2048 to ensure that when free
htt_htc packet in misclist, the htt_htc packets has done sending
completion already.
Change-Id: I2d86f68485b1d45a5ea4edb6b952f746700df54f
CRs-Fixed: 2609903
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
Add code to remove void pointer usage for dp_soc
and use original dp_soc structure inside htt_soc
Change-Id: Icdc26ecdb33d565c43dbc101584069808b31c1a0
CRs-Fixed: 2484403
Make change to remove usage of void pointers for
ctrl psoc in DP and instead use a opaque pointer
struct cdp_ctrl_objmgr_psoc.
Change-Id: I9fac21db1156378fc10b95cf10517afa4364da00
CRs-Fixed: 2484411
Add code to remove void pointer usage for htt_soc
and introduce opaque pointer to be used intead of void
from dp layer into htt layer
Change-Id: I555b67af656e89f63d81bb5aa8c7472ea517ae85
CRs-Fixed: 2484402
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Remove dereferencing of htt_soc structure from dp layer
and instead use HTT APIs.
Change-Id: I6b796f9b6504c763e6df2cf49b15bf3eecfbdf69
CRs-Fixed: 2483401
htt_command_record, htt_event_record, htt_wbm_event_record
function is used to log command,event, wbm event to
in-memory data-structure.
We call these function from htt path.
Change-Id: Ib3e18b895485c84f0010f8c3ba95c2da85b00bde
CRs-Fixed: 2428742
For HTT PPDU Stats TLVs, if target has provided less data than expected,
pad the data with zeros until it matches the expected length and
process the TLV, instead of asserting.
This enables testing of different FW and Host versions during regression
analysis.
CRs-Fixed: 2451611
Change-Id: I79aaad8a6fde6d49510c3a212b21425ac784ad5c
On low memory platform rx_pkt_header tlv is not subscribed to get a
savings of 128bytes in skb. This is required to reduce the skb size from
4K to 2K on 32-bit platforms. Use HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG
message to unsubscribe rx_pkt_header tlv for rxdma ring.
Change-Id: Ie684f1ca1de9c824a869b4e13fd0ee1d068004e7
CRs-Fixed: 2408424
MCL DP initialization path is running into issues due to change
I5732453f617bdc16995fda916b645c41845c3ecb. Fix the same.
Move flow control lock variables to re-use region. This is needed since
flow control deinit happens in dp_soc_detach, while in dp_soc_deinit, the
soc memory is being partially reset.
De-init HTT memory in dp_soc_deinit and free HTT handle
in dp_soc_detach. The existing code was not freeing HTT
packets for MCL case and freeing the HTT handle twice.
CRs-Fixed: 2359409
Change-Id: I52dcccc0444d4ce139a29ffcb884598bbacda88f
Avoid memory fragmentation that happens during
attach-detach flow.
- Reuse transmit allocated static pool memory across soc up/down.
These memories are allocated during soc attach.
- Reuse DP source ring memory, DP soc context, DP pdev context
across soc up/down.
- Reorganise structure members of DP soc and DP pdev so that
we can zero out structure members across soc up/down
- Add cdp soc init/deinit and cdp pdev init/deinit that
will be active across soc up/down
Change-Id: I5732453f617bdc16995fda916b645c41845c3ecb
Set monitor direct filter when smart monitor is
enabled. Deliver header from NAC if md bit is set
and smart mesh feature is used.
Change-Id: If1ef865e013c21bbb58bcb89a87856b12d6c7278
Crs-fixed: 2246660
pass psoc/pdev object as ctrl pointers to instead of legacy objects.
It introduces new APIs to get feature pointers of psoc/pdev.
DP attach API param modified to pass ctrl psoc (psoc object)
Change-Id: I3d83f28c3e72e5ee984a4220b9d5cf3c4522b501
CRs-Fixed: 2177109
htt_h2t_rx_ring_cfg is invoked with suitable configuration based on
filter passed by wlan_set_monitor_filter.
Change-Id: I2fbb81e95903ae1bead92892fdb3165c8a515f14
