As part of protected dynamic interface control feature, add
infra to disable/enable wifi, when invoked from user space.
Change-Id: I3f6c2abcef1ef89cbd0a735820de9b54d37bfa29
CRs-Fixed: 3166467
Add multi-client latency level service bit capability support,
WLAN_SOC_WLM_MULTI_CLIENT_LL_SUPPORT, to check whether the FW
supports multi-client latency level event or not.
Add INI "wlm_multi_client_ll feature" to enable/disable multi
client latency level feature from the host side.
* @min: 0
* @max: 1
* @default: 0
If firmware sends multi-client latency level service
bit capability to host and host enables multi-client latency
level feature via INI, the host waits for an event
WMI_VDEV_LATENCY_LEVEL_EVENTID as a response to a request
command WMI_WLM_CONFIG_CMDID.
Change-Id: I5cbea89e67caabac5db70b7f0a91c18bdd512e9b
CRs-Fixed: 3180928
On Wear HL based target with keystone kernel, it generates
WLAN driver with name "qca_cld3_wlan.ko" based on macro
definition WLAN_WEAR_CHIPSET. But the driver was not loading
because of the old INI path and /dev path.
This commit modifies the INI path and /dev path based on
macro defined i.e. WLAN_WEAR_CHIPSET.
Change-Id: I6d457a3bb708de3175c40b0f2b3ba0ebde915838
CRs-Fixed: 3168115
Currently wmi_roam_event_id event handler only register under feature
WLAN_FEATURE_ROAM_OFFLOAD, but it's needed for LFR2 roaming too. So
refine roam event processing for LFR2/LFR3.
Change-Id: Ic07fd8a543142fc1e151f484979ab99ff55ce802
CRs-Fixed: 3161973
Remove the old SAP-CSR flow for start bss, stop bss and
channel change req processing which is disabled currently
under the SAP_CP_CLEANUP macro.
Cleanup the redundant checks in the deauth, disassoc
response processing in CSR.
Change-Id: I5a360fc267688b51ca645551108b65646a3c8c1a
CRs-Fixed: 3164259
Kiwi target does not use the TX credit cmd ring and the
TX status ring.
Hence disable these srngs for Kiwi target.
Change-Id: I2473aad5b16316e3033c7d7ee9f81ee518dd2097
CRs-Fixed: 3157132
Add new sysfs entry to enable or disable capture of
datapath tx delay stats per vdev.
Enable HW_TX_DELAY_STATS config flag for Lithium targets
to support capture of tx delay stats at runtime.
Change-Id: I838961daf27e08c4b6e693852c62f9f894f499a5
CRs-Fixed: 2981004
Enable source port learning for SAP to add AST entry for the
remote stations with next hop. The SAP should use 4-address
frame format for the remote destinations.
Add support to handle data packets for WDS destination.
Change-Id: I6002e6dd9c9bb2c7b2e4f85bf06156dbb7feebee
CRs-Fixed: 2997812
Call the Wifi Pos API to advertise 11az security
related wiphy ext flags. Add Kbuild changes for new
file to advertise Wiphy Feature flag.
Change-Id: Id8c9c51770c3153c9c8a140f965249d1b0d1a844
CRs-Fixed: 3150582
Enable feature DP_RX_DELIVER_ALL_OOR_FRAMES for lithium DP
which will allow all OOR frames to stack.
Change-Id: I3ad59fc3b3fc8e70b2f05a7cfa23e2646c1e03a4
CRs-Fixed: 3152334
Remove CONFIG_WLAN_FEATURE_REDUCE_RX_THREADS compile flag.
Keep num rx_thread dependent on rx REO rings, 1 rx_thread for
each rx REO ring. It is controlled via INI dp_reo_rings_map.
Change-Id: I701e5cec79a8968b540c9437fe297ca1db8cd5d3
CRs-Fixed: 3048265
Rename files with blacklist/whitelist to denylist/whitelist.
Rename files with blm to dlm.
Change-Id: Ief7ce0a797f74460c9708f8d2dd440412af5b7eb
CRs-Fixed: 3099864
When build kiwi_v2 driver, it reports below error
"make[3]: /bin/sh: Argument list too long". It's because when ar
process kiwi_v2.o, current driver generates too many characters which
over bash's limitation, so create lim.c file to includes all lim layer
common files to save some room.
Change-Id: Ic4a1a71ebc9e42fde5e1a11b5342a7f17a9e0d91
CRs-Fixed: 3138823
Add feature flag to support marking first packet after wow wakeup
and enable it for QCA6490.
Change-Id: Icbda6dabe61a113a8aaa87f7a8fd1d95555226a1
CRs-Fixed: 3137627
Add chip version info in driver structure, platform driver
can use this info to decide whether accept this registration or not.
Change-Id: I37ba897954147ad75515f88e7ff35417e5de39e4
CRs-Fixed: 3125766
Currently refill thread is not getting chance to update
refill buffer pool, which is causing the increase in
rx thread time.
To fix issue move refill thread to performace cluster.
Change-Id: I839352ff09da692f801e97f7938a67ab8f09742b
CRs-Fixed: 3138081
Set the new macro CONFIG_REG_6G_PWRMODE for all targets. This enables
the new for power mode APIs which will replace the for freq APIs.
Change-Id: Ibb17616fdfc8bd110b3a68b4636c9b3c1bc9ca97
CRs-Fixed: 3136314
Disable monitor mode on sdx65, it will save 5MB buf,
and improve iperf performance.
Disable WIFI_MONITOR_SUPPORT for pdev/vdev/peer do
nothing of monitor mode.
Enable MONITOR_MODULARIZED_ENABLE for monitor_soc
attach do nothing.
Disable QCA_MONITOR_PKT_SUPPORT for monitor ring
which are not initialized in dp_queue_mon_ring_stats.
Change-Id: I9865ad38dbbee56abee567fded17f39ee299ac42
CRs-Fixed: 3069269
Enable the support to parse the common user info from
the tlv in monitor status ring for KIWI.
Change-Id: Id54817efb65c005578c7cc28286feabde1bea652
CRs-Fixed: 3129126
The duplicated MACRO in Kbuild is:
cppflags-$(CONFIG_HTT_PADDR64) += -DHTT_PADDR64
Change-Id: I0da070efcedf1af58bf0443f3402e6750c36a351
CRs-Fixed: 3111174
Add support to update tsf timestamp on driver entry and
exit in data packet. This helps debug latency issue in
XR usecases.
Change-Id: I49d190a55b7ab3081225b7a226f1bbe4f717a20f
CRs-Fixed: 3090104
Add "gEnableUpdateScramSeed" ini support to send
WMI_PDEV_PARAM_EN_UPDATE_SCRAM_SEED command to firmware
to enable OFDM scrambler seed.
Change-Id: Ie5c244a7ea418eec0af1f576e8521804ee85a665
CRs-Fixed: 3106348
Currently wlan_cfg80211_mc_cp_stats.h file is present at
qca-wifi-host-cmn/cmn/os_if/linux/cp_stats/inc.
With this change, move file to qcacld-3.0/os_if/cp_stats/inc
as this file contain MCC specific code.
Change-Id: Ia531094fb15ae86f5afab2b9c3bdde197feaac6c
CRs-Fixed: 3108266
The flags, CONFIG_TX_MULTI_TCL for multi SW2TCL and DFEATURE_IRQ_AFFINITY
for Tx completion IRQ affinity, were turned on for KIWI.
Change-Id: I44a7b1c889d7113f078a75c549a632809dbebad0
CRs-Fixed: 3110299
Add cpp flag support for CONFIG_ENABLE_LOW_POWER_MODE in Kbuild.
Currently, this config is enabled for wearables only.
Change-Id: I2fb08930290f5c23641e1d76796ab829b31aae04
CRs-Fixed: 3110291
Replace blacklist/whitelist with denylist/allowlist for
blacklist manager component. and replace blm with dlm.
Change-Id: I8dec146d8cb3b61dc891b72bea44704b8ab733fe
CRs-Fixed: 3087575
Currently there is no support to read bmiss stats from fw.
With this change, add support to read bmiss stats from fw.
Change-Id: I77594d05fbcd295aff4c625ba5f4f33cbc491063
CRs-Fixed: 3097304
Enable CONFIG_DBR_HOLD_LARGE_MEM for QCA6490, to avoid
large memory allocation failure during idle restart.
Change-Id: I8f504f278bab6f4d974e8cf6b778e6c5ab9ec838
CRs-Fixed: 3101976
Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address. Interface down and up will lead to VDEV
delete and VDEV create commands to the FW.
To optimize Host-FW interactions during set MAC address, add support
to update the MAC address without bringing the interface to down state.
Change-Id: I76afa8f8c2504e8271bf689392d526f994afff0a
CRs-Fixed: 3063201
Add support to send qos null frames received from firmware on
STA interface to mon interface based on config value. The config
value get update based on vendor command set by user.
The packet filter check in ucfg_pkt_capture_process_mgmt_tx_data
moved to target_if_mgmt_offload_data_event_handler. So that we
will not allocate any buffer if filter is not set.
Change-Id: I426b340c5a65711ada971062af95ae039d18d0bd
CRs-Fixed: 3076241
