ppe2tcl and Umac reset interrupts need dedicated irq lines.
Hence, group some of the existing dp groups togeather
to share MSI lines to make space for ppe2tcl and Umac reset
dedicated irqs.
Change-Id: I5181caeaeb4d0107b62e7ac812c2f829fd8215a2
CRs-Fixed: 3423553
Trigger panic if it takes too long in completing
the tasks. And also modify the maximum retry count
if PANIC_ON_BUG is enabled to avoid false alarms.
It makes debug easier for tasklet stuck and schedule
latency related issues.
Change-Id: I521661c656d227ffb3f4c87ecd56bbfa938c9c25
CRs-Fixed: 3441248
MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Change-Id: I09395978f890d9a23564bef4f974971f6de175df
CRs-Fixed: 3427204
Reduce log level to debug from error to avoid console flooding
when low mem condition is hit.
Change-Id: I0341beed9059c4db2eba2cc481a797d67dd35b25
CRs-Fixed: 3442503
Consider 4 address repeaters also for vdev stats when operating in
WDS Extended mode.
Change-Id: I91d9bbeb2b917154da730b22b46645e76fa55c6f
CRs-Fixed: 3437803
Some devices in WDS station mode have limitation when connected
in 3 LINK MLD association where the Primary umac selected and assoc
link should be same. Make sure to have a sanity check before
going for association in such cases.
If the primary umac and assoc links are set to be different then
the connection will be rejected.
Change-Id: If56461a140d4685ba279b1babe04709d919d1650
CRs-Fixed: 3443733
Add support to send RX stats when Direct switch is
enabled. For WDS extended mode get the stats from
peer object, else take it from vdev object. These will
be accumulated by PPEDS module
Change-Id: I1f73c50679c416536cfc1ebaaeaec9b307e8bf56
CRs-Fixed: 3421251
Get peer_id from peer structure to a local variable and pass to hal api
in order to avoid race condition between peer delete and peer unmap.
Change-Id: Ib6a89f1defcfc8f66c1146a330a373a760520aa7
CRs-Fixed: 3444998
Do not send assoc response from wlan_mlo_peer_create for
multilink MLO connection. This makes sure that assoc resp
is invoked only once.
Change-Id: Id1acf20bd5e3e3beb16e0dc3073676c421825ae6
CRs-Fixed: 3443511
Current code doesn't have hif_ce_desc_history in ssr driver dump.
Fix this by adding the two data structs: hif_ce_desc_history_buff
and hif_ce_desc_history to the ssr driver dump regions.
Change-Id: I9256d94db6c3c3a3588e5729b9181efabdaf18ea
CRs-Fixed: 3443230
Currently if IPA wants to add 2 filters and
send the filter params in 2 separate add
requests, HOST does not handle this correctly.
This causes the second filter params to be 0.
This change updates the correct index to be accessed.
Change-Id: Ib0a4853d46585d9529e990177fb8da20382c2fdb
CRs-Fixed: 3441196
Driver extracts the vdev from peer, self mac address and
vdev_id. But in some APIs, there can be below scenarios
For example:
1. peer is not available for that vdev( roam vdev),
2. API does not have vdev_id,
3. mac address is not known or incorrect,
4. there is no session available.
While roaming, there can be scenario where driver need to
fetch the vdev before peer creation and session is not
available.
For this, driver introduces new API to fetch roam vdev from
pdev object.
Change-Id: I4a2521773b893a8dc0553335bcadac5a84fbc300
CRs-Fixed: 3441493
done the following changes to improve the RX path KPI
1. remove the extra invalidate in RX path as
we no longer dirty the RX TLV cache lines.
we now store the rx error codes in nbuf cb instead
of RX TLVs reserved memory bytes.
2. with features like flow tag and wds extended mode
enabled by default, the rx_fast_flag is always set
to false, this resulted in lot more instructions
being executed in RX path.
Now we ensured this flag is at least set for other
features which are not enabled by default.
Change-Id: I04c6bdc52a2b3f1248b822a108d8bd1a70abcc7c
CRs-Fixed: 3406505
Once an incoming MGMT frame is inserted in the MGMT Rx REO egress list from
wlan_mgmt_rx_reo_algo_entry(), there is always a possibility that the same
frame could be sent to upper layers from the other CPUs before
wlan_mgmt_rx_reo_algo_entry() completes its execution in the original
MGMT Rx path. This means that nbuf and MGMT Rx params of a given frame
could be freed before wlan_mgmt_rx_reo_algo_entry() completes.
Hence, make sure to not access frame's nbuf and MGMT Rx params once the
list updates are done for that frame.
Change-Id: I91cbdef4b1ea5b81d39606e47a46021f30193ce5
CRs-Fixed: 3433621
As of now, RX PPDU START USER INFO TLV is not subscribed as
part of pktlog. Since enable_ol_stats is set by default and
it subscribes RX PPDU START USER INFO TLV, we can see
RX PPDU START USER INFO TLV being available as part of pktlog
data. But recently, with all the automation testing scripts
it is decided to set enable_ol_stats to 0, hence subscription
of RX PPDU START USER INFO TLV is taken care during the filter
set up for all the pktlog modes.
Change-Id: Ib8c7e668a17fcb8e791784d29ef6f00fbdd2df34
CRs-Fixed: 3440721
This change is to populate wmi service for 11az TBR rsta.
Also, this adds host based enum id for corresponding wmi service.
Change-Id: I9687855651bff222616adb3a8cf346e6264688ee
CRs-Fixed: 3437035
The existing code does not support capability to be set
if trigger based ranging rsta wmi service bit is enabled.
This require addition of ext feature flag for trigger based
ranging rsta support.
Add 11az TB rsta ext feature flag and set the same as per
firmware capability for 11az feature.
Change-Id: I12512175d0b33daa906586c7f96f0c8c3f7400a3
CRs-Fixed: 3437057
On some profiles memory debug is disabled. Add memory debug disabled
version to fix compilation error on such profiles.
Change-Id: I1ea99767a02e9b2e919cb1892c5d9ecbf04d470a
CRs-Fixed: 3442812
In some scenarios, there can be need to get the peer MLD address.
For this, add new API to extract the MLD address from the scan entry
by the BSSID.
Change-Id: I3b78501cb5320b3e834313a048b6fa0a84eab03b
CRs-Fixed: 3441498
Change monitor print to debug level as this print causes flooding
and could potentially lead to CPU flooding.
Change-Id: I76cda51c9d3d0658ebd02b2112fba5310d8eb22c
CRs-Fixed: 3439802
1) select lower bw vdev link as primary umac for first station
2) Added support to increase group size to distribute stations
on all PSOCs
Change-Id: Ic6762fbe8e6bc5feef70ddaaa118af121d38a1f4
CRs-Fixed: 3366442
As of today, dp_peer.c has the peer management and rx_tid
functionality(create/setup/remove) which is used by the REO HW.
WCN6450 does not have REO HW and dp_rx_tid functionality is not
required for WCN6450. Hence, separate out dp rx tid functionality
from dp_peer.c so that we can avoid compiling unnecessary code
for WCN6450.
Change-Id: I322823704f38ff72e485f050941be6b1254bad09
CRs-Fixed: 3383330
Move cfr monitor filter cdp func ptr to cdp mon ops structure.
cfr monitor filter cdp function is different for 1.0 and 2.0
hence moving the func ptr to mon ops structure ensures that
func ptr is initialized appropriately.
Change-Id: I82b9c85e96f2f219521ae6ed908ade120081c748
CRs-Fixed: 3428791
Since special vendor roam log is not need for common roam,
add flag to filter the log.
Change-Id: Ide67de16ae68c507a7b4e81672cbf5e0fc0e4c5d
CRs-Fixed: 3442621
In the case of WCN6450, WBM HW block is removed in the UMAC.
TX completions come via HTT messages. Add logic to handle
HTT TX completion messages from the firmware.
Changes are specific to WCN6450 and hence implement the logic
in the arch specific code.
Change-Id: I447020354ce26e8948e4b49648c434fb2ed302cd
CRs-Fixed: 3381814
Currently 0x400f0000 is assigned to 2 helium targets
Remove WCN3990_v2_2 from the SOC ID entries and keep
correct target for this ID.
CRs-Fixed: 3432410
Change-Id: Iab5c6ade70038953e729e4e7994484d4f192022b
If only a single filter is installed,
then the ip version of the second filter
param will not be set. Hence fix the check
for ip version in htt layer as it is already
verified when received from the IPA layer.
Change-Id: I05dff71aa27a254023599df0cbab51bafd0c4f82
CRs-Fixed: 3441760
rx_user_stats were used to update HE info in
Radio tap header, but HE info is stored at ppdu level
stats.
So changes are done to update HE info using ppdu level
stats.
Change-Id: I4734ee5df73d3a865a8b63a9ed28d647cc52d9f2
CRs-Fixed: 3405611
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Currently dp_soc_init/deinit API's are called first for
common soc initialization/deinitialization and then architecture
level init/deinit APIs are called from base dp_soc_init/deinit.
But with RHINE architecture dp_soc_init/deinit API's are not common,
so we cannot call these APIs as base. To handle this scenario
routing all the soc level init/deinit from arch ops APIs and
arch ops APIs will take care of calling common soc_init/deinit.
Change-Id: Ibb10d452931630c917088b4d222c7fbd82621f6a
CRs-Fixed: 3404205
Trigger SAP / GO channel switch on receiving
wmi_csa_ie_received_event_id from FW in STA + SAP / GO DFS SCC
concurrency.
Change-Id: Iff60dffb71b170f56c4fbee4e297b81b87632a2a
CRs-Fixed: 3431365
Add support for WMI_CSA_IE_RECEIVED_EVENTID as:
1. Register the handler
2. Handler to extract the event
Change-Id: I9f476c7fbc51d9686d05fbdb5f46dec3bcd3c29e
CRs-Fixed: 3431363
Currently we have a 850ms timeout threshold not to
block upper APPs, but this could contribute to some
query timeout. To address this issue, this change
changes the timeout threshold from 850ms to 100ms.
Change-Id: Ibb39609000972d09713a0435b4884454b331fe4f
CRs-Fixed: 3436517
Add a flag WLAN_VDEV_FEXT2_MLO_STA_TDLS to mark whether
the vdev is used for TDLS or not.
It can use these API:
wlan_vdev_mlme_feat_ext2_cap_set(vdev, WLAN_VDEV_FEXT2_MLO_STA_TDLS);
wlan_vdev_mlme_feat_ext2_cap_clear(vdev, WLAN_VDEV_FEXT2_MLO_STA_TDLS);
tdls_vdev = mlo_get_tdls_link_vdev().
Change-Id: I89c50ad5321013993e798ebb5549c5015ac18969
CRs-Fixed: 3435963
Remove wapi frames from is_eapol check in dp_rx_null_q_desc.
This change is to address the below issue:
First wapi packet received in dp_rx_nll_q_desc,
before TID setup does not reach stack since it is
treated as an eapol frame and gets dropped in
dp_rx_eapol_deliver_to_stack.
Change-Id: Ibcad786eb1a1cec1c082ec630ea38cc582627dfa
CRs-Fixed: 3413689
Remove DP_MLO_LINK_STATS_SUPPORT macro from per
packet RX Path to enable Link Peer Stats support
Change-Id: Ie4b7ac70db3ba3a8cc20a53de320c0eb1720d08b
CRs-Fixed: 3443161
Currently for client SP, super channel list is disabled
even if the corresponding reg rules are sent by the target.
To address this issue, add two definitions for
reg_is_sp_pwr_mode_allowed_in_supchan, to check
if the given mode is SP mode in the super channel list.
Change-Id: Idb1fc22e3ba4a61a07e03302f92fd8e2a6a9bc85
CRs-Fixed: 3426498
The datarate for Data packets and QOS NULL packets,
shown in the Radiotap header was wrong for QCN9224.
In Lithium based devices, for data packets datarate
is not included in the radiotap header.
So for WKK also changes are done to not to include
data rate.
Change-Id: I3fa8a65973e3e0b01ef589551c6621d35b34b984
CRs-Fixed: 3408916
Mark the blanking support as not supported and
return success status for AR9887
in target_is_scan_blanking_enabled().
Change-Id: I055f4d3b30781189744b0d96db4a93b61c0cf1f4
CRs-Fixed: 3430100
