Add atomic check handling in color processing framework.
This will check cp features during the validate phase.
Change-Id: I6d94316a749ad247aec0554c31fa56af6db61ab6
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change moves the DSC implementation into a separate file.
This is required to add support for new compression algorithms.
This cleanup change also, moves struct sde_encoder_virt
declaration to the encoder header file.
Change-Id: Idc3b96e65fcce2a7ee6e17af604cec0cb574f6f7
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change enables display drivers code compilation
for lahaina target and current location of header files
is replacing the header files in usr/include/drm directory
before installing display specific header files. This change
ensures both the drm and msm_drv header files are exported
to user mode clients.
Change-Id: If6fc347598b902e670b7206dbcb82fe0740b3984
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Since clock set flags api is deprecated for new target, this
change removes sde wrapper and removes LUT memeory retention logic
from crtc module.
Change-Id: If37ec780913668c1a43f8a71e79249679526bd34
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This snapshot change adds downstream support
for drm 5.x+(msm_lahaina branch) linux kernel.
Change-Id: Ia691c95da155a00e449c91a2f1a5b20a8e71aed4
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
1.Typecast to avoid distinct pointer type comparison
2.Keep DMA mask aligned with api definition.
3.Add Suffix for literals
4.Remove multfrac func to avoid uncompatible division.
5.64-bit division( operator "/") on 32-bit platforms is not supported.
Using platform independent API's here
Change-Id: I0e7305418e53876bd1adf00c1963f85cbdf980cc
Signed-off-by: Ravikanth Tuniki <rtunik@codeaurora.org>
During secure-ui, the SMMU, MISR and VBIF states
are altered based on the enable/disable of secure-ui
which is followed by the scm_call. Failure in any of
the steps would lead the system to an unstable state.
Address all the failures and revert back all steps
to get the system back in original state to avoid
any issues.
Change-Id: I736c6cf018c5992ec33806c00e58bf56b818b8a7
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add support to handle mdp limits property which
can be used to represent maximum possible limit
for different usecases like sspp linewidth,
bandwidth limit etc. Each child node can be
used to describe each property.
Change-Id: I4b0645201fa29bba1a083e2df4733bec07f0dd96
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Clients of local tone mapping engine need to know when hardware block
was turned off, to enable mutually exclusively display features.
Change adds support for ltm off event notification via custom event
interface of drm.
Change-Id: Ibfe2f85eadb0b939deee56194387b51b1e5ca8b9
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
During the validation of inline-rotator downscale ratio,
in the plane atomic_check phase, the client_type is
derived from the crtc->state. This leads to wrong
client_type as in check phase, it has to be derived
from the new crtc state. Fix it to derive from
new crtc, which would in turn be used to get the
correct inline-rotator downscale ratio.
Change-Id: I109fc6fd81182b1cda1c4feefbf421d3fab433c7
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
During SUI validations and transitions, the encoders
are iterated to find the panel-mode. If concurrent
writeback is enabled, it is assumed as video mode.
Add check to consider only the built-in display
panel mode during sui to avoid wrong interpretation.
Change-Id: I2901eb29a0799571a95f6ab6f9f3f2c6154424c5
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
During transition from sui to non-secure if concurrent
writeback is enabled, it is incorrectly assumed as
video-mode panel. This leads to wrong video-mode
validations and false errors. Fix the check to get the
panel mode only from the primary display.
Change-Id: I3da3076d17cfe2314118b947133cbfc55581a195
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Partial update will be disabled while panel operating
mode switch from command to video.
Display validation will be failed once CRTC and connector
ROI state are not the same.
So add this change to get connector roi state even partial
update is disabled.
Change-Id: Iebb1d001c1c11b659141ce301400704c16390ee6
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
This change saves the previous state before moving into the transitional
smmu state, during secure-display/secure-camera usecases. Upon failure
to complete the transition, set smmu state to the previous state.
Previously, smmu state was staying in transitional state.
Change-Id: I1a78ddcf6ac1c7ea66c8c2095cd1a6d6160647a1
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Helper function is returning the width of single mixer. During
atomic crtc check, the number of destination scaler is not
considered before width check and can fail possible higher
resolutions. The mixerwidth should be taken as a multiple of
num_ds_enabled.
Change-Id: Id9e5e0ccf0cebb54d2a242e039d8dc3676b3729f
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
SDE fence driver avoids duplicate fence creation if
fence timeline is not increased. This may lead to issue
if client closes the fence with failure ATOMIC_COMMIT.
SDE fence driver provides the closed fd node to subsequent
valid commit and leads to invalid state. This patch avoids
duplicate fence creation from crtc and connector object
instead of sde_fence.
Change-Id: Ic7b43762f0ad251fb20e42edb5f4d5f401790e14
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
For calculating fps, correct frame count initialization
from 1 to 0 to avoid counting one extra frame on every
periodicity window.
Change-Id: I53cea321bb4d3335cc58e08df2f530cd1a306297
Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org>
Create a data structure to maintain available hardware resources
and track capabilities. This data structure is used to send
the current available resources and caps information to
connector ops get_mode_info, get_modes and validate_mode to
process the display mode.
Change-Id: If38fc628ee5ab4729821f88c0050ab45375187b8
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change takes a snapshot from 4.14 to 4.19 as of
commit 47d149c31967 ("drm/msm/sde: Add null pointer
sanity checks").
Change-Id: Ib40428c562c3561c8a20d9849f16d13151496005
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Currently the dynamic bit clock switch trigger for command mode
is supported via sysfs node. This might lead to unnecessary
race conditions, when dsi driver is enabling the dsi bit clock
as part of commit and at the same time if bit rate change via
sysfs happens. So make the trigger happens via kernel mode set
call as done for video mode.
Change-Id: I17acb408d2b6dbd6fa41994e56262e31e43d088b
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
This change adds support for dynamic switching of dsi clocks
to avoid RF interference issues. Also with dynamic dsi clock
switch feature coming into picture, now populate the supported
refresh rate as list instead of providing a range. Modify the
logic to enumerate all the modes in dsi driver, taking dynamic
bit clocks, resolutions and refresh rates into account.
Change-Id: I5b6e62bc935cf2234bdd96fcb3c7537b4e735fff
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
During atomic_check phase the encoder_mask is taken
from old crtc->state leading to wrong validation.
Fix it by taking the encoder_mask from new crtc state.
Change-Id: Ifcfc4bee887168d8208ffdafb1cf5ea4c4473796
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Userspace is not supposed to request vblank until crtc is enabled,
because drm framework rejects the request if crtc is not enabled.
Any vblank request prior to that need to be cached in the userspace.
Hence removing the cache logic from the downstream driver.
Change-Id: I78ceee331cba2d691f68fd649bd5cf33f7868e72
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Current sde driver allows vblank enable and wait requests
even after crtc is disabled which would eventually lead to
enable of irq and timeouts in caller context. This change fixes
it by updating vblank callback status as 'on' during crtc enable
and shutdowns vblank callbacks before crtc disable is complete.
Change-Id: I52b74f685107f4dc8c83305c28f23cdcb4747730
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
SDE driver triggers the frame and waits for the
ctl_start interrupt for command mode display. This interrupt
provides confirmation that hardware has picked up the
frame. Retire fence signaling is associated with
this interrupt and it is sent at the rd_ptr interrupt
after ctl_start. Due to lut dma delay, ctl_start interrupt
may be trigger before rd_ptr or after rd_ptr. SW manages
this complexity and handle retire fence for different cases
with 500us threshold logic.
This change replaces the ctl_start interrupt with wr_ptr
interrupt by programming it to trigger at 1st write line
count. This is guaranteed to come every time and it is close
to rd_ptr interrupt. That allows retire fence trigger at
wr_ptr interrupt and simplifies the SW logic. CRTC commit
thread would be held slightly longer with this change
as the wr_ptr is always close to rd_ptr and after
ctl_start.
Change-Id: Ic47a8f82c854b4aded0d70c95af853b28a68ffd6
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Fix the crtc status to print the formatted src
rect for all the planes and log the true inline
rotation flag. Move the event log in splash cleanup,
so that it is not logged for every frame.
Change-Id: Id2a323254f632a649c335455f5ef53b7d805c3a5
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
DSI display may support video mode and command mode both and it may
support transition between these two modes.
This change adds seamless transition between these two modes for DSI
display by avoiding crtc enable/disable and panel power on/off
during modeset.
Change-Id: Id7ddaef7d1f0f7cc7d52283755bad53a246adec6
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
On the first commit, cont splash flag is still enabled on
encoder, but connector is not yet attached. When a check-only
rm reservation is made, it does not get released due to
cont-splash check. If cont-splash is enabled, rm should
not check for connector, but directly release rsvp_nxt.
Change-Id: I79be3c1bb20b74ce4a95786c90f3accfb587d7f2
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Userspace is not supposed to request vblank until crtc is enabled,
because drm framework rejects the request if crtc is not enabled.
Any vblank request prior to that need to be cached in the userspace.
Hence removing the cache logic from the downstream driver.
Change-Id: I5383e39075377e3e49b8d335598ddfa48ab54666
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Current sde driver allows vblank enable and wait requests
even after crtc is disabled which would eventually lead to
enable of irq and timeouts in caller context. This change fixes
it by updating vblank callback status as 'on' during crtc enable
and shutdowns vblank callbacks before crtc disable is complete.
Change-Id: I9085103ced06e5fad51219f26bd8dd655fa36fea
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Add runtime_pm ops support in drm driver instead
of direct sde_power_resource_enable/disable call.
It allows drm driver to use runtime pm refcount logic
to track the resources instead of custom implementation.
The change also removes the NRT_CLIENT support from
sde_power_handle code to simplify it further.
Change-Id: Ib14692dca5876703d0a230da2512d731b69b8ebb
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Update the bootloader set core-clk rate to the SDE software
structure when continuous splash is enabled. This will
make sure SDE handles the shift in core-clk rate correctly
when user-mode votes for a different rate with the first
frame.
Change-Id: Ib8e11332578ad154b14793d8ddcfec488be63aef
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
When continuous splash is enabled, connector states
are not properly updated with the encoder associated
with it. This is by design, so avoid all making
such request there by avoiding unnecessary errors
during the bootup. Fix a handful of warnings in
the PLL definition files
Change-Id: I7f08c5ff80ea2a2bfb4b19f2ea13c8f9cbb833e8
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
