Due to 11KV feature version update, add new enum
"WMI_HOST_VENDOR1_REQ1_VERSION_3_40" in WMI_HOST_VENDOR1_REQ1_VERSION
and convert the host enum to target.
Change-Id: Ibcd52b93b9caf3a8bbfc7fa9028664a2d3666197
CRs-Fixed: 3381254
Currently, firmware sends WMI_WLAN_FREQ_AVOID_EVENTID with set
of frequency ranges to be avoided when it finds LTE operating
around those frequencies. Host driver marks these frequencies
as unsafe and doesn't operate in SAP/P2P-GO mode.
There is a new requirement where SAP can be allowed to operate
in unsafe channels when below conditions are met,
1. Firmware advertises the capability fix_channel_priority in
WMI_COEX_FIX_CHANNEL_CAPABILITIES through ext2 event.
2. SAP is started in a fixed channel.
Fetch the capability fix_channel_priority sent by firmware and
cache it in wlan_psoc_host_service_ext2_param to support
this feature. Add APIs to cache value received from firmware in
psoc_info->info.service_ext2_param.sap_coex_fixed_chan_support
and to fetch the same.
Change-Id: I8ceb501240bc86d6b004446f9927f4402c487203
CRs-Fixed: 3381399
In api extract_roam_11kv_stats_tlv(), request token,
response token and report number are not extracted
for neighbor report.
Add support for request token, response token and
report number for neighbor report.
Change-Id: Iefe384fe760f25d6ce1870e52817c72577f0d5a9
CRs-Fixed: 3370856
Update MVR handlers and init to setup/use MVR bitmap
depending on bitmap MVR support by FW.
Change-Id: I3a73ddefeae85d8f6b4fc31f9c1f1164fa5346c7
CRs-Fixed: 3355001
This change is to allow other modules to register for
link disablement.
It includes below functions:
1- Notify link update
2- Register to handler to get link update notification
3- Unregister T2LM handlers
Added the below changes as well,
- Move T2LM related data structures to wlan_mlo_t2lm.h file
- Host receives the expected duration from FW for multiple vdevs.
Hence, add support to extract the expected duration for multiple vdevs.
Change-Id: Ie8e77d5d3b4351a8551ecd7da50786b58dad3b2e
CRs-Fixed: 3346432
Add WMI interface(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID) to
configure EDCA/PIFS param for LL SAP.
This configuration depends on edca_param_type.
If edca_param_type is 0 then host will configure EDCA param and
send it to firmware via WMI interface.
If edca_param_type is 0 then host will configure PIFS param and
send it to firmware via WMI interface.
Change-Id: I4f2e4120a258cc4a20aabeed503709aa2ceb8ec9
CRs-Fixed: 3349467
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host on the
progress of the link removal operation. Add support to process this event.
Change-Id: I0c4d5b047cf062b421380f85717fac5a9bdea9c2
CRs-Fixed: 3334950
For SAE-EXT-KEY AKM with group-21 pwe, the PMK
length is 64bytes. Therefore, increase the max
size of the PMK to 64bytes in host to facilitate
PMK storage and PMK offloads.
Change-Id: I049cd14c1c71e1809b394199862409780a16371d
CRs-Fixed: 3353114
Add the service bit wmi_service_wpa3_sha384_roam_support
used by firmware to indicate the roaming support for
WPA3 SHA384.
Change-Id: I4bb4f9fd83085c48c646818124265486bae62c0c
CRs-Fixed: 3334343
Add API to parse the TID-to-link mapping event ID for the AP vaps.
As part of this event,
- Update the mapping switch time TSF value in host data structures.
- When mapping switch time or expected duration expires in the FW,
update the host data structure.
Change-Id: I93232429fe5c2aa12dc4bf9f6a2f014761b7df15
CRs-Fixed: 3350697
Add support for vdev level WMI Command and event to send
and receive t2lm ie info
CRs-Fixed: 3339695
Change-Id: I8b896a961cba8f1d8e11111f900a98da090b9513
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined,
host pdev/vdev set params can be translated to
target pdev/vdev set params through APIs
convert_host_pdev_param_tlv,convert_host_vdev_param_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined,
host pdev/vdev set params in
common code is sent to firmware directly, which is incorrect.
Define pdev/vdev set params in such away they represents
host params on ENABLE_HOST_TO_TARGET_CONVERSION enabled and
target params on ENABLE_HOST_TO_TARGET_CONVERSION disabled.
Change-Id: I5718c76c351b2d7904d8bf8b603073ffcb0a039d
CRs-Fixed: 3321556
Add common code to configure target AFC flags:
enable_6ghz_sp_pwrmode_supp, afc_disable_timer_check,
afc_disable_request_id_check.
Remove cfg_get set is_afc_reg_noaction code, add it to psoc regulatory
private data.
Add APIs to set and get these AFC configures.
Change-Id: Idf74b245113eee18b071a7fbb92bb151cd535ce8
CRs-Fixed: 3154185
Critical update is the explicit signaling for STA to notify
any change in BSS param.
Present support is there for beacon, host notify to FW by
updating current link CU param in wmi_bcn_tmpl_ml_info TLV
of BCN TMPL CMD by setting the corresponding cu_vdev_map
for category 1 / category 2 based on change in critical
update params of ML VDEV.
The same Critical update signaling is extended to 20TU
unsolicited broadcast probe response.
In 6 GHz link host notify the same category 1 / category 2
cu_vdev_map critical update params of ML VDEVs in 20TU
enabled group wmi_prb_tmpl_ml_info TLV of WMI_PRB_TMPL_CMD.
CRs-Fixed: 3314429
Change-Id: I84dbd1901c5a3f2ef28f981c581fd7350d147829
Add WMI support for WMI_SERVICE_EIRP_PREFERRED_SUPPORT service bit,
which indicates that the target prefers EIRP in the
WMI_VDEV_SET_TPC_POWER_CMD_ID.
Change-Id: I1433bd698e124336082e12f509f271c9dd7df40a
CRs-Fixed: 3307372
Currently host does not update band capability to fw as
part of feature set info.
With this change update band capability as well as part of
feature set info.
Change-Id: I09982f2f1b7b831a62f6f4db97691aeb4a4fb894
CRs-Fixed: 3303427
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined, WMI_HOST_PEER_*
can be translated to WMI_PEER_* through API
convert_host_peer_param_id_to_target_id_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined, WMI_HOST_PEER_* in
common code is sent to firmware directly, which is incorrect.
Define WMI_HOST_PEER_* to WMI_PEER_* if ENABLE_HOST_TO_TARGET_CONVERSION
is not defined. Then WMI_HOST_PEER_* can be used in common code.
Change-Id: I50aa604d8822a81eed223c8551e542007929424e
CRs-Fixed: 3271470
Adding feature flag for Health Monitor so that it can be disabled
for 16M and 256M profiles
CRs-Fixed: 3277434
Change-Id: Ibbbe582acd15ebff7e189fcbaa36429ea519db37
FW-Host Handshake for BANG_RADAR_320_SUPPORT
1. FW advertises its capability of processing BANG_RADAR_320_SUPPORT
id via wmi service bit 'wmi_service_bang_radar_320_support'.
2. If the host is capable of processing the "BANG_RADAR_320_SUPPORT"
event id, host sends the capability in WMI_INIT_CMDID setting a bit in
host_service_flags
Change-Id: Ia26a7b8e8ee78aceb801d0053770379bd6d5a9cb
CRs-Fixed: 3270525
Update peer_chan_width_switch_info as per latest
fw common header file to include puncture parameter.
Change-Id: I1a68991ed8b9c653d31c4bc0c3ad3660d1104de3
CRs-Fixed: 3278709
Add API to extract MLD AP MSD capabilities from MLO IE
common info field if present. This will be shared with FW
via peer assoc cmd.
Change-Id: I0ebcd5408a40f3314932d4a2a7e586c208af2ee5
CRs-Fixed: 3271118
Remove unused param key_rsc_counter of set_key_param
structure, as key_rsc_ctr is used to send key rx sc
counter to fw and rename key_rsc_ctr to key_rsc_counter
as win is using key_rsc_counter.
Change-Id: Id58aabb30d772f8f620ac9f96890fcac0193777b
CRs-Fixed: 3256574
Currently host sends many vdev or pdev set param commands
separately to firmware.
Combine all vdev or pdev set params together where ever
possible, send to WMI.Based on service capability
WMI_SERVICE_COMBINED_SET_PARAM_SUPPORT, host decides whether
to send all set params to firmware at once to reduce number of
transactions or need to follow legacy way i.e send params
separately one after the other.
Change-Id: I0a36dd66a7ccb27f2ecd437cf7b9d08667e27472
CRs-Fixed: 3151418
Based on new requirement, driver needs to send feature set
information to fw as part of wmi init command.
With this change, fill the feature set info in feature set bitmap
and send this to fw with wmi init command.
Change-Id: Ic405c7e8e5ddd1399deacfaab240e979468c53c2
CRs-Fixed: 3262862
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
If found rx link speed change from good to poor, or poor to good, need send
to F/W. It may happen frequently. To avoid power side effect, send to F/W
by QMI instead of WMI.
Change-Id: I2e7ddd3ae539257c6b195cb13da221f886debbba
CRs-Fixed: 3255042
Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Rate-limiting will be based on number of beacons received.
When the beacon is not from connected AP, the beacons
are dropped on a percentage of received beacons and
rate limit, which is configured by the user.
CRs-Fixed: 3230508
Change-Id: Iac591c37129fda6923ef254c2950cb0bdbb44ce9
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: Ic7b3badb14daff183dd36927b4dae6bbc036e6cd
CRs-Fixed: 3225166
