While altering ESD check to te_signal_check, return error
as this option is no longer allowed and should not
change ESD mode.
Change-Id: I32a9a47aba4e41451ba3d8ffc1eeba41d9f547d7
Signed-off-by: Samantha Tran <samtran@codeaurora.com>
Add a new connector property to allow DC dimming feature to set
dimming backlight LUT. This change also adds a connector event
for client to register for backlight info needed for digital dimming
feature, including OS brightness, OS brightness_max, panel_backlight,
panel_backlight_max, and scale factors from ABA and LTM features.
Change-Id: I78f713fb2b965ca24effd973b4dfa9ff07a852f8
Signed-off-by: Ping Li <pingli@codeaurora.org>
This change adds allowed_dsc_reservation_switch to determine if
dsc seamless switch is supported for DP. Also, based on the
flag, it determines and populates the required number of
available resources for DP.
Change-Id: I9cd7219a50d352369c5bc8386ce7dc25c30b80b6
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Mode information apart from the fields in
drm_mode_modeinfo that can trigger a modeset like
dsc-nondsc, video-cmd are defined in sub mode.
For each mode in connector->modes there can be
multiple submodes.
Change-Id: Ib8697d3fa4ea5261d9ac4943b1a4149e22c4da2f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds logic to determine dsc switch based on
the connector property "CONNECTOR_PROP_DSC_MODE" and
performs seamless DSC switch if there is any change in
DSC configuration. The connector property is populated
in msm_sub_mode based on which suitable mode is selected.
Change-Id: Ifc4931f16dfb814781bc1d72b103e09103e6bfee
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Change adds more panel and display information during the DSI
display bind.
Change-Id: I3571244501149a95ea4f6ab0e496112199f7bbde
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
For simulation panels read commands need to be avoided. The change
also adds and substitues sim panel check with a new is_sim_panel API.
Change-Id: Idafdad8a852cad87d97bbc64e9c7cb82460e25b7
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Avoid registering for te interrupts to check te status
for ESD detection during commit failure path.
Change-Id: I447473f7c32a396f72d838c68287bed0eda64b20
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
The change ensures that during a Trusted UI case, configuring
and toggling the DSI PHY PLL is skipped.
Change-Id: I3246c8e5f01d47ac6fd58098f859ef8436a762bf
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Currently, the demura parsing has info logs, this change reduces
the log level to debug for all the parsing logs.
Change-Id: Icd9e73a7788cb01e09068e4d0957bc1e11a329da
Signed-off-by: Santosh Kumar Aenugu <santoshkumar@codeaurora.org>
Add full mode information to dump panel info debugFS
node to allow for additional verification.
Change-Id: Ie56f3b44a8b35075d78575def1469b12bed60252
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
For simulation panels, GPIOS are not needed for panel bootup.
This change handles GPIO parsing, toggle sequences in
simulation panels.
Change-Id: I0a3f03d1958ffe9079a7d9fef3f412e2445b0b9b
Signed-off-by: Santosh Kumar Aenugu <santoshkumar@codeaurora.org>
Currently on video mode panel, when the RFI bit clock
rate is set back to the default rate, the driver is not
detecting that a VRR operation is necessary due to
unchanged porches value.
This change is forcing a VRR update on video mode panel
whenever the RFI bit clock rate is changed.
Change-Id: I16520b6ca1909f878bff1bb97472b15fe2a3d13b
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Currently, on a video mode panel when a mode switch occurs after the RFI
bit clock rate has been changed, the driver fails to find the new mode
in the list of panel modes due to different porches value between
the adjusted mode and the default panel mode.
This change removes the front and back porch value check from mode
matching function when dynamic bit clock and maintain constant FPS
features are enabled.
Change-Id: If267a4f732fea2c7d84c8bb3d5650f3e93722ec4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
The change adds a check for DSI controller and PHY resources during the
DSI display probe. The validation now only checks for the availabilty
of the resources without increasing the refcount of the controller or
PHY till an exact match is found after the device tree is parsed.
Change-Id: I96a5022a8ab5f55271e0df36675037b597e1ec85
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Some panels require a fixed step rate for a particular mode.
This change allows DSI panels to specify a single supported
step rate for each nominal fps rate which SDE will enforce
during atomic check of AVR parameters.
Change-Id: I049415449bc88ccd396fced16d4534251eac3a06
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change expands on the checks comparing different dsi modes.
Previously, only h and v active and refresh rate were checked to
decide if a matching mode is found. Now the check will include
all h and v components in dsi_mode_info.
Change-Id: I6a4ca3456138c38615fbd5c50dfd9658cc3a2119
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Request for display in firmware only if no display enabled form
the UEFI.
In the targets supporting dual DSI display having both displays
DT nodes part of the connector list, if only one display is
enabled from the UEFI, then the driver requests for display
in firmware for the second display. Getting the display panel node
from firmware is time taking process, and it can take up to
ten seconds. This causes a delay in adding the component for the second
display, resulting in a delay in bind calls for components of the
msm drm driver.
Change-Id: Ic0aa5ca890fc874d38d3e7eef745f2942e12f9bc
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
The boot_disp_en flag for secondary display is getting enabled
all the time, even if its boot_param string is empty.
Correct the boot display name parsing from boot_param string
to fix this issue.
Change-Id: Ica1465611f592b22518061987571919838914891
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
ctrl and phy refcounts get incremented even on deferring probe
for display panels which need backlight through wled.As a
result, while probing, it considers that the device is already
in use. This change decrements the ctrl and phy refcounts for
defer probe.
Change-Id: Ica1f5712dd28ed4c635946f2ac89d5f4f074a4c5
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
Add VM ownership checks before accessing the HW through the debugfs
path in dsi display/ctrl modules to avoid illegal access.
Change-Id: Ia6e2ab0ef60d0f11e5945a63885d939db2ef78b0
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Register and unregister te irq only during a ping
pong timeout to check the health of panel.
Change-Id: I38d7f178b55d252840aad6fae08b5f34296d75ab
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
The order of the panel timing nodes specified in the device tree is
not guaranteed to be the same while being parsed in the driver. This
results in unintended modes being set as preferred timing mode. The change
introduces cell-index property, so that the timing modes can be
accurately indexed and parsed.
Change-Id: I8ccd4d5a15643bfe72bc8be084f5e91fac26feb4
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Change adds support for enabling splitlink sublinks video data swap.
Change-Id: I731b85a5e8fe8638005433819957dd0658f72963
Signed-off-by: Vara Reddy <varar@codeaurora.org>
DSI display configuration can be either DT or firmware file driven.
When probed with firmware path, asynchronous firmware file read
callback function will be too late to check for dependencies and
defer the probe when the dependencies are not met.
Move all the dependency checks before the firmware file read request.
Since the panel data will not be available before the DT/firmware read,
this change limits the check to the dsi display layer.
Change-Id: Ib26ed7839389027c2fe2dc15f70a572df3990ed9
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Currently, RFI feature only supports panel that contains
a single timing node. This limits the feature availability
for panel with multiple modes or with DFPS support.
This change adds support for RFI on panels that contains
multiple timing nodes.
Change-Id: I3a7aadf7b6da3518350b2eb815602b13b5c259f5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add a new connector range property and a new entry to the panel
capability blob to publish the list of supported RFI frequencies.
In addition, add the required functions to set, validate and update
DSI bit clock rate value to trigger an internal seamless mode switch
and reconfigure DSI clock and PLL.
Change-Id: I7d19cc369f8c5528709f2f20a51ef02180ebdea4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
When doing const fps RFI, dynamic refresh clock was done
in the next frame kick off, so as the orginal RFI work flow,
the clock setting also should be done here.
Change-Id: Ic3e6a35dc7264df028f5d848ac6f1eea04a95126
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This reverts commit 23734fc295.
Reverting this change as it does not address all the below uses cases for Waipio
- Supporting PROBE deferral based on dsi ctrl availability
- Dual DSI path with optional single DSI node
- Firmware DT blob parsing for single / dual dsi panels
Change-Id: Ifc747befadd85eb76995b6cb1f72407fa5dccdbb
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Clients of dsi driver can register to be notified of panel id
information. Dsi is probed early during the device boot-up. If the panel
id is available with dsi driver none of the clients have registered
that early. Once clients probe and they register with the dsi driver
panel id is not passed onto clients until power on of the dsi. Change
adds support to notify the dsi clients during registration if panel id
is valid.
Change-Id: Ic475060cbec5f5b645aed865939fffe66aef071b
