Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Rate-limiting will be based on number of beacons received.
When the beacon is not from connected AP, the beacons
are dropped on a percentage of received beacons and
rate limit, which is configured by the user.
CRs-Fixed: 3230508
Change-Id: Iac591c37129fda6923ef254c2950cb0bdbb44ce9
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: Ic7b3badb14daff183dd36927b4dae6bbc036e6cd
CRs-Fixed: 3225166
Add bt_coex active field in roam scan done info as
part of roam stats event handler.
Change-Id: Ief31efe491bede5ae4571bf0f5ace284aa6ea0fe
CRs-Fixed: 3226707
Add change to fetch and save the WMI service capability
bit of FW to support vendor handoff control feature
using service bit.
Change-Id: I6bc85f2807032bf84d391f34c814c91de906ab42
CRs-Fixed: 3225147
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
Add eMLSR support for ML STA. It consists of 2 changes-
1) Since POLICY_MGR_HW_MODE_EMLSR_MODE_BITPOS macro has value of 32, a new
SET BIT function has been implemented to accommodate the 64-bit operation.
2) Add eMLSR related params to peer assoc mlo param struct to update FW
via peer assoc request.
Change-Id: I6e54c632677eacabc57338b0f159d97023b100f2
CRs-Fixed: 3185010
Send connected links bitmap to FW via a command:
WMI_REQUEST_STATS_EXT_CMDID in case of MLO connection.
Change-Id: I8ea88b0474769a56f5efa0cd006ba515e858accf
CRs-Fixed: 3149043
Add WMI parameters to support delta tsf calculation based on the
use_tqm_timer flag.
Change-Id: I6346f0b661bdede56874f4589f4dcc4d8b95c439
CRs-Fixed: 3193329
Set num_max_active_vdevs to WMI init command and
extract it from WMI ready event.
Change-Id: I6d6377c03214fcab74c675839f136301ebf27834
CRs-Fixed: 3183010
As part of MLO stats feature, add support to send ll_stats
and get_station stats request to firmware for all the MLO vdevs.
Change-Id: Ic50a6294f868f0604d4cfc0d4b657b6085da2fb4
CRs-Fixed: 3181020
Add mapping of wmi_vdev_param_set_traffic_config
to WMI_VDEV_PARAM_VDEV_TRAFFIC_CONFIG.
Change-Id: I2147cad3fb5726551de64edcfc41bee2707150a6
CRs-Fixed: 3191504
Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Userspace sends the vendor command WIFI_TEST_CONFIGURATION by
setting the attribute WIFI_TEST_CONFIG_IGNORE_H2E_RSNXE when
driver needs to ignore the SAE H2E mismatch for 6 GHz connection.
This is needed for certification test support
Change-Id: I5c1838598478ab74d72d57a765452d7fd989b701
CRs-Fixed: 3072578
Add support in wmi to handle below new RTT PASN events:
WMI_RTT_PASN_PEER_DELETE_EVENTID
WMI_RTT_PASN_PEER_CREATE_REQ_EVENTID
Change-Id: Ib33c2def2d7ef66a6a2717e2a8e1756ab4318e4d
CRs-Fixed: 3150069
Add WMI changes to send TID-to-link mapping to FW as part of peer assoc
command and as part of WMI_PEER_TID_TO_LINK_MAP_CMDID.
Change-Id: Ia3a8fb10d49e1d54d6f4f418be3f684bc0147c5c
CRs-Fixed: 3183734
cal version is included in EXT2 svc ready message to indicate the bdf
and ftm version to host. Add API to extract this from ext2 message.
Change-Id: I83f4d6e83a3f78f993b40527aed7291c6496777c
CRs-Fixed: 3182634
If the multi-client Low latency feature enabled in driver,
FW sends WMI_VDEV_LATENCY_LEVEL_EVENTID to report latency
level honored by FW as a response to a request
command WMI_WLM_CONFIG_CMDID.
Change-Id: I06f7bbc2365e8b71e0ae6386ef42ef4238dafd35
CRs-Fixed: 3180940
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
Change puncture_pattern to puncture_bitmap in peer_assoc_params.
As FW required, do the bit inversion for puncture bitmap in peer assoc,
then pass it to FW.
Change-Id: If96358aa9cc639555835ca1a1412d7893b16dbd7
CRs-Fixed: 3124854
Replace slave for target, and replace
master for initiator which pair of slave.
Change-Id: I51ee0ce1ce0d0dc30281388a270bda1edfac2903
CRs-Fixed: 3169180
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
Copy software image version, chip information,
pktlog json version and pdev id from the event received
from firmware.
Change-Id: I53c2fceee129fa69126ae8214fb652a744bfcbfa
CRs-Fixed: 3165004
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Add WMI support to set PN Rx Filter which is used to forward
frames to host upon PN failure.
Change-Id: Ib32abc681e17e1a6189a295314a497fc0c21b15a
CRs-Fixed: 3150832
Add WMI service-id for radar found center freq
and populate_tlv_service for WMI_IS_RADAR_FOUND_CHAN_FREQ_IS_CENTER_FREQ
CRs-Fixed: 3135120
Change-Id: I2f25bc0c9629a0bddf79b7f52eb5fcb82206cdc8
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
Extract all the parameter provided as a response from the firmware
for the TSF action command.
This could be used to calculate the difference between the TSF
and TQM clocks
CRs-Fixed: 3136492
Change-Id: I8377bd177f5ea246c9b7939315509ab0b6f2051c
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit.
Change-Id: I038073085dca1370bafe691b6b0ba8c4476be7a2
CRs-Fixed: 3118892
