1.Add check in Tx completion path to handle
mcast packets from all ML partner vdevs
2.Handle cases where a ML mcast vdev can be
deleted and started as NON-ML vdev and
viceversa by adding reset ML mcast conf.
3.Optimized Register configurations for Mcast
at Init/Delete and Start/Stop AP
Change-Id: Iab8a5a081e2e0377509574d362754d32c5b83df2
CRs-Fixed: 3350350
Suspect HW update WBM2SW ring HP, but the ring entry contents are
not updated accordingly which then host will fetch one stale ring entry,
this makes other TX packet are freed unexpectedlly.
Add change to detect this situation earlier, if HW cookie conversion is
done, then invalidate 2nd dword for upper 32bits of VA, so next time when
reap this ring entry contents to know if this desc is updated by
HW or not. if HW cookie conversion is not done, then compare the PA in
buff_addr_info with PA in current TX desc to check.
Change-Id: I351eb4f860216fc618ff28736d4832fcec45dcc5
CRs-Fixed: 3345935
Add ring id info in TX HW descriptor event history,
this helps to map history event to corresponding HW TX
ring in multi TX queue enabled case.
Change-Id: I82dcece76b1342f4086d489ba489da7c20ea6cad
CRs-Fixed: 3294177
bank id is newly added in TX descriptor for BE chipsets. As such,
with IPA Offload enabled, IPA needs the bank id information to do
offload WLAN TX.
From WLAN perspective, bank id is designed to be used on a per-vdev
role basis. E.g. STA vdev and SAP vdev have separate and different
bank profiles.
However from IPA perspective, bank id needs to be on a per TX ring
basis, because IPA GSI FW is not able to identify STA or SAP vdev
role on a per-packet basis.
Hence initialize last HOST owned bank id profile for IPA usage.
Change-Id: I0cf71b638f5999905069aff0551d8ebeb5477e17
CRs-Fixed: 3289558
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Use WLAN_CONFIG_TX_DELAY to enable HW Tx delay for both
SAWF and non-SAWF stats.
Change-Id: I6db7d386c0e3654f53398dcba1db7c5568544b0c
CRs-Fixed: 3262425
- Add support to compute HW Tx completion delay on WKK
- Define arch op to calculate delay
Change-Id: I82567cc781e90fe01dc5a0edfffacd4cde73f652
CRs-Fixed: 3220911
1. Remove prints in per packet path
2. Add prefecth for skb shinfo
3. Avoid qdf_get_cpu() in DP tx
Change-Id: I86d196cc7865a2d5b3a5a6098f6f7d84397a60d0
CRs-Fixed: 3227568
Fetch the SAWF service_id and queue_id from per packet
metadata and populate on transmit descriptor.
Change-Id: Iba652c271b5b701e8af875805e59f0f224ace691
CRs-Fixed: 3194921
When TX completion is released from FW, dp_tx_notify_completion()
will not be invoked, then TX DCHP ACK will miss
hdd_softap_notify_tx_compl_cbk() which then
WMI_PEER_CRIT_PROTO_HINT_ENABLED with value 0 will not send to FW.
(1) move dp_tx_notify_completion() from dp_tx_comp_process_desc_list()
to dp_tx_comp_process_tx_status(), so that both TX completion release
source FW or TQM case will call it.
(2) clear TX notify flag for intra-bss forwarding BC/MC to avoid
unnecessary TX completion notify.
(3) Set ts.status for release source FW case otherwise it will be value
0 always.
Change-Id: I2bf9900a3d16ba162a83b061f0b96e7d2f79423a
CRs-Fixed: 3178423
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Search flag addrX and addrY will be enabled for STA + TDLS case,
but currently TX bank profile is not updated which then STA still
use default TX bank profile - index based lookup search, TX might
fail.
Update bank profile with addrX and addrY search enabled.
Change-Id: I6af12d3707b59c5d4b4bba1fc5ec05a22bfcd984
CRs-Fixed: 3148759
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Currently HW TX queue HP value is updated for every TSO segment enqueue,
as a part of optimization update HP only for the last segment.
Change-Id: Ibe349a1e6f55932bf780e1f755f13841078a493f
CRs-Fixed: 3138142
Support TX completion and RX delay tracing by Ftrace for KIWI,
Add generic IP protocol packt tracing like ICMP packet.
Change-Id: Ie0c4b1764ce953fd2ed41fc5eea8aa28c8d427d9
CRs-Fixed: 3126080
Initialize txrx_ref_handle for whunt bypass,
Which is complaining use of uninitialized txrx_ref_handle,
as it is not able to detect that txrx_ref_handle is
populated from another API.
Change-Id: I0f69cf4c8442a5655559622a5825d7af35b9ae5e
CRs-Fixed: 3127788
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Tx descriptor is not being freed and put back in tx desc
pool for a long time. As a result, system is not going
into suspended state.
To find this descriptor, during dp_bus_suspend and
dp_runtime_suspend, parse through the descriptor pool to
check for any descriptors not freed for a long and trigger
self recovery when found.
Change-Id: Id97c5c8537c9bec922f4e254b5bf094505ee61ff
CRs-Fixed: 3109868
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
Multicast support for MLO
1. Following functions are newly added.
dp_rx_igmp_handler()
dp_tx_mlo_mcast_handler_be()
dp_rx_mlo_mcast_handler_be()
dp_mlo_get_mcast_primary_vdev()
Change-Id: If215f843369e6e2621ef302b924e524c86f0d30b
In the case of MCC due to low power mode atomic operation in
accessing the bank is resulting the crash.
Fix crash by using spinlock for WIN and mutex for MCC.
Change-Id: I5bb49cbed32e41ad88bfaeb24496adb180e37551
In the case of RAW mode, VAP parameters encap type, dscp_to_tid map id
and cipher are not updating in bank register.
Added a API to update vdev param.
Change-Id: I702bee563e7451f403fa32292bf20680cd66e213
CRs-Fixed: 3078687
Changes to have HW cookie conversion context per
desc pool.
This context will be used to program CMEM of the
other SOC in case multi-chip MLO.
Change-Id: I5ec68813e8fcb6d124698a52f5553acf9a7b1795
Currently, to set checksum enable flags in Tx descriptor
we are checking the csum_enabled flag along with stack checksum
offload request. In case of roaming from latency-critical connection
to non-latency critical connection we request stack to calculate
checksum and set csum_enabled flag to 0. For some packets which
are already queued where the stack has not calculated checksum and
csum_enabled flag is set to 0, we will not set the checksum enable
flags in Tx descriptors for those packets.
To fix the issue remove the csum_enabled flag check and directly
check if the stack has calculated checksum for those packets or not.
Change-Id: I8d7754afc3d0a33315b85b0113cd3062e5783e28
CRs-Fixed: 3070858
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
For STA mode when index based search is used ADDR_X
flag need to be disabled. This is needed to generate
HW mec notify events to FW
Change-Id: Ib074c474f6e06accf09adeb53b3a1f85e30d4076
FW has some usecases when it needs to enqueue frames into hardware. In
BE WLAN chips, some hardware TX desc fields are moved into Tx
banks, hence a TX bank is also needed to queue to HW.
Dedicate a bank for FW usage.
Change-Id: I1f19f0ef85aff4c7592b0f07de4631259da743a6
CRs-Fixed: 3016828
Below are the changes in HW headers for E1.5
1) WBM2SW release source enum changed back to lithium values
2) DSCP to tid table num is added in Bank register
3) MCAST ctrl value is moved from Bank to seperate register
Change-Id: I342c451d792b1618dcb62ca9d4c77dcf4d4beeac
