Print info related to WTC BTM roaming coming via
wmi_roam_trigger_reason_tlv_param.
Print timestamp, which indicates the time when btm response is sent
to AP, coming via wmi_roam_btm_response_info_tlv_param to HOST.
Change-Id: I2c408527739e1e2831015dd7b959ab17299abf6b
CRs-Fixed: 2740597
It is required to enable blacklist manager to pass some case like
OCE-5.6.1, RSSI-based Association Rejection.
Change-Id: Iffae667851b63b8c28f9eadb9519c9172270c244
CRs-Fixed: 2741521
Dynamic rx aggregation feature depends on the context
id which is obtained from the packet context block.
This context id is invalid when this feature is not
enabled, and hence can lead to out of array access/write
leading to memory corruption.
Fix this issue by not using the context id when the dynamic
rx aggregation feature is not enabled.
Change-Id: Ie551217409b0f5aa2f704f9c617949e0d42a74d0
CRs-Fixed: 2742653
In scenarios where p2p is going to be the first connection,
while performing group negotiation, pass up the allowed non-pcl
channels with valid weight so that supplicant can include these
channels as well during negotiation.
Passing interface mode to policy_mgr_get_valid_chan_weights and
populating the channel list based on policy_mgr_is_concurrency_allowed
api for the given mode and assign WEIGHT_OF_NON_PCL_CHANNELS for all
allowed channels.
Change-Id: I8ff08163e6490642f9c2ebd9ca08f1275a2bb1b8
CRs-Fixed: 2734756
During the init sequnce host and firmware exchange the capability
messages, if there is any timeout driver currently induces the fatal
to debug the issues.
If the reason for the timeout is beacaue is because of firmware is
already recovering gracefully return resulting in probe failure.
Change-Id: I487aeae23db37a0ad2d991bae113b221e19a439a
CRs-Fixed: 2742638
If it is LFR2.0 roaming and BTM trigger, original procedure is always
stopping roaming scan with reason REASON_OS_REQUESTED_ROAMING_NOW,
After roaming stop configured, it will check the stop reason and post
eWNI_SME_ROAM_SCAN_OFFLOAD_RSP to invoke host handover to new AP.
Currently the roaming scan logic is changed, if roaming scan not in
enabled state, it will not invoke roaming scan stop, so host handover
cannot invoke when BTM.
And even roaming scan was enabled, the stop reason was override to
REASON_SME_ISSUED in csr_post_rso_stop(), also cannot invoke handover.
Fix it by check the stop reason against REASON_OS_REQUESTED_ROAMING_NOW,
which indicate it is LFR2.0 reassociation invoked by supplicant.
Change-Id: I39a84d06b9c696179da1b854985a23b874a399c5
CRs-Fixed: 2737888
Set the user power save configuration setting in NL power save
command handler.
Change-Id: I8f4d1955071af08a5c0511a4c01c46d79e70e1b0
CRs-Fixed: 2743237
Change the usage of cfg parameters from Internal/External
to External in .h description for mlme, p2p, and
policy manager files.
External means that both internal teams and external
customers can modify the parameters.
Change-Id: Ic1e68d5a90be2c898ce66aa18e8d91f16561b408
CRs-Fixed: 2712773
AGO/AP is started and beaconing, but the hostapd_cli status cmd still
show "dfs". This will happen when the STA connected on DFS
channel and AGO/AP is starting on same DFS channel.
By design the AGO/AP CAC is skipped due to STA+SAP DFS concurrency.
If we skip CAC timer, we will need to indicate the CAC event
even though driver doesn't perform CAC, otherwise hostapd will
stuck in "DFS" state.
Change-Id: I7961d0b976fd84fc1f29449d98eb150d1463a92f
CRs-Fixed: 2733624
To support "no dbs intraband MCC" feature for LITHIUM target, enable
FEATURE_NO_DBS_INTRABAND_MCC_SUPPORT flag in Kbuild.
Change-Id: I2f94d99fae0ec31dd8e5056397e59be3478b7540
CRs-Fixed: 2739080
It will enable periodic capture of tsf and qtime pair.
The qtime will be used as reference for determining
instantaneous tsf.
The 'cat tsf’ command to fetch tsf will print the tsf
at that instant as well along with qtime and host time.
CRs-Fixed: 2736030
Change-Id: I11eb70d4ae710ef2bf50ebee708801fa67d0396c
Issue: Currently host supports WLAN_AKM_SUITE_FT_8021X_SHA384,
RSN_AUTH_KEY_MGMT_CCKM and RSN_AUTH_KEY_MGMT_OSEN AKM
in sta mode but doesn't advertise these akm suites which
may cause issue for FT_8021X_SHA384, RSN_AUTH_KEY_MGMT_CCKM
and RSN_AUTH_KEY_MGMT_OSEN supported connection.
Fix: update wiphy->iftype_akm_suites and advertise missing akm
suites.
Change-Id: I43762c38e15746f50f897a6026b1b96fd571ec4d
CRs-Fixed: 2713183
- Limit the timeout value of the BLM entry if it has big comeback
value and allow connection to that BSSID.
- Fix the BLM entry time stamp boundary checks.
Change-Id: I07bf7b1fce1c1e8d349c4fc0a9b0fed07f237197
CRs-Fixed: 2741689
Possible use of uninitialized Variable "report" in
rrm_process_beacon_req.
Fix is to initialize "report" pointer to NULL,
before use.
Change-Id: I1dcbec60b0028d52046ce28836df83a04e2ed830
CRs-Fixed: 2734078
During idle shutdown(T1 Thread), Driver sends the PDEV
suspend command to FW. If ACK is not received, driver initiates
the work for self recovery. As a part of self recovery(T2 thread)
driver allocates the memory and sends the force fw hang cmd and
wait for the event.
T1 thread continues and stop all the modules and check for mem leaks.
Since t2 thread is not completed and free the memory, the crash
happens as a part of mem leak check.
Fix this race condition by cancelling and flushing the recovery work
in cds close.
CRs-Fixed: 2730021
Change-Id: Ieffff621e0838b341531c5b7feda1277ee4f70fd
In wma_get_trigger_detail_str() driver prints the roam trigger
detail for Low rssi and Periodic scan triggers, the RSSI value of
the current AP is the value before roam scan is triggered. But
the firmware considers the rssi of the current AP after roam scan
is complete to calculate the next RSSI threshold. So there could
be mismatch in the current rssi value and next rssi threshold
when roam_info->rssi_trig_data.threshold is used to print the
current AP rssi.
Use roam_info->current_rssi to print the current connected AP
rssi in the roam trigger logging.
Change-Id: Ib154bb3cbdfe13dbcdd8c8830cdafb6daefa34b5
CRs-Fixed: 2739346
Mgmt txrx component clones skb and sends cloned
skb to its clients ex: packet capture component.
Need to Allocate memory and copy skb so that there
is enough space to copy radiotap header in skb for
packet capture mode.
Free skb cloned by Mgmt txrx component.
Change-Id: I6bc66b5916ec5a8cf28741e4fcb72f14650fdbfa
CRs-Fixed: 2730559
Since there is common API to get spectral version, so use ucfg API to
get spectral version directly and remove unused codes.
Change-Id: Icfd4c68a035166dcaa32478128107249df2c4c95
CRs-Fixed: 2575839
Currently, bus bw timer is not stopped if STA disconnection is
timed out. Due to this hdd_bus_bandwidth_deinit fails.
Force stop the bus bw timer during hdd_wlan_stop_modules to avoid
hdd_bus_bandwidth_deinit to fail.
Change-Id: Idcdf011383838f1dc061f3e0f32ada97e617a8c9
CRs-Fixed: 2739304
Deregistering packet capture callbacks can call while
processing mon thread which can lead to race condition.
To address this, deregister packet capture callbacks after
mon thread successfully processes its current packet.
Change-Id: I09640128a57ef6adac4e6a025cb81667e49b6e4c
CRs-Fixed: 2735587
In wlan_cm_roam_send_set_vdev_pcl(), pcl_req intially checked
for NULL can be dereferenced later.
Validate pcl_req and return error if pcl_req is NULL.
Change-Id: Iccc4e09c636d2643c319a1767bf8f673d6d36a80
CRs-Fixed: 2734082
Enable the sanity check for rx descriptor nbuf
even for the perf build.
Also enable the rx rings history.
Change-Id: Ib127029009d0657ea51d3592af6a42f3de210c16
CRs-Fixed: 2739120
