Move smart monitor cdp func ptrs to cdp mon ops structure.
Smart monitor cdp functions are different for 1.0 and 2.0
hence moving the func ptrs to mon ops structure ensures that
func ptrs are initialized appropriately.
Change-Id: Ic827b44f36d76349f397e5b72dec0a127f90aa7a
CRs-Fixed: 3428778
Add CDP api support to notify asserted soc info to DP
umac reset module, to disengage a asserted soc from
umac reset process.
Change-Id: I92ee07ed90243567dab83d0686022c8327efe1b6
CRs-Fixed: 3428265
Set WDI version based on SOC architecture, set WDI
version to IPA_WDI_4 for QCA_WIFI_QCN9224 chipset,
else IPA_WDI_3.
Change-Id: Ib80435e5098cfbcb9f90d4ac9cfe81ea183f308a
CRs-Fixed: 3383949
On FW recovery, do not allocate a new VP and use
the existing profile to setup DS VP
Change-Id: I330613fa104c51becc1018750edf91d8055edb01
CRs-Fixed: 3427382
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Add HMWDS rem-addr support to delete AST WDS mac entries in
Beryllium chipsets.
Change-Id: I5623bac02b326d1d668ad5e1fdcfc3a9f8cbbb9c
CRs-Fixed: 3397961
Enhance the SAWF UL related API's and structure definitions
to configure min_tput and max_latency parameters.
CRs-Fixed: 3398855
Change-Id: Iffe82b765e90386a21aa47016db61f953ba9a5bc
This change will hold the PCIe in L0 state for the
duration of this feature. The hold will be
released after data transfer is complete.
Change-Id: I762bc3423059ad641bdd00ac5b301a1e1b16f6c2
CRs-Fixed: 3406490
Changes to cdp layer to support optional
wifi datapath feature.Add cce_super_rule_setup fn
to pass filter tuple from ipa layer to htt layer.
Also add support to send wmi commands to enable/disable
low power features like IMPS, BMPS and ILP.
Change-Id: Ie7e5ec2066977e4fce37f08bb5e0137327f0728a
CRs-Fixed: 3403426
The kernel-doc script identified a large number of kernel-doc issues
in the dp/inc folder, so fix them.
Change-Id: I6213164d2209cc4de9684ae66281ee2999f82672
CRs-Fixed: 3375078
1. Maintain and fetch PPEDS profile from be_soc instead of be_vdev
2. Enable WDS EXT mode for Direct Switch
3. Provide cdp API's and structures to interact with osif
layer to get PPEDS profile info
Change-Id: I997126e3b5ae85dabdcd6053115927122b8681da
CRs-Fixed: 3404778
Add cdp layer API to get stats and
Copy pdev deterministic stats from dp_pdev to cdp structure
Change-Id: Ia7dbbe4cfe7ebe66a040879144505b17aaaa625a
CRs-Fixed: 3380939
Add cdp layer API to get stats and
Copy peer deterministic stats from dp_mon_peer to cdp structure
CRs-Fixed: 3380939
Change-Id: Ic90b9c9f5c7463ad0d5b7c2bb7a371e4d4fef070
Add CDP API support to remove the ML
partner link in DP during ML-Reconfig
link removal.
Change-Id: Ibdcffb72f34bc74415b43e9b493fd94ec39312e5
CRs-Fixed: 3383451
Enable intra bss fwd offload on vdev by default
by sending wmi command to firmware.
Change-Id: I5fcc828f8360c93a7adbcf8f1f2cb7cc58593a49
CRs-Fixed: 3362569
Use the flag RX_PEER_INVALID_ENH for invalid peer
event instead of FEATURE_NAC_RSSI
Change-Id: I87e301a48b1ccdcd28f8e2eb0ba80b215efa384c
CRs-Fixed: 2969193
To handle dp_mlo_ctxt assignments from the UMAC module,
moving the callers for attach and detach to the list of
MLO operations for multi chip.
CRs-Fixed: 3355400
Change-Id: Id743ec1086cf1b3ba0a3ec42212dc21c5a9ccc6b
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
In force teardown case disable the interrupts before
going down. As target may be still active, we may
still continue to receive traffic. Disabling
interrupts to nsure we dont process interrupts while
cleaning up partner SOC
Change-Id: I7092d398c039302234206cb72f7453b6dc0cbcb7
CRs-Fixed: 3332961
Add MAC ID to which the Spatial Reuse stats is requested from.
Pass this MAC ID to FW to get the respective Spatial Reuse stats.
Change-Id: Ief2434bf1f2fc82d9339ee38933effbd580088af
CRs-Fixed: 3328686
Add support to read TSF2 and TQM scratch regitser in the HAL layer
for WKK v1 and v2 board.
Change-Id: I0ef5e8cf4e06c0b5c98169252a81f70989285d2d
CRs-Fixed: 3321782
As part of mac address filtering feature for scan radio in special
vap mode, on addition of first NAC entry or deletion of last NAC entry
the corresponding monitor filter needs to be set or reset
Add change to support ops callback function required to set or reset
monitor filter settings are runtime.
Change-Id: I916c0b246bb180363f1a181ef49618af763b261d
CRs-Fixed: 3317409
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
In SAP due to intrabss forwarding, Tx ring update is going through
when WOW enable command has been sent to FW. This results in crash.
To fix this, do not update HP when apps suspend is in progress.
Change-Id: Id4176224563bdd759828397fa1cd23de1598192e
CRs-Fixed: 3294407
Debug framework for tracking the SMMU mapping and unmapping of
skb buffer when IPA offload is enable and IPA_SMMU_NBUF_TRACKER
is define.
CRs-Fixed: 3255423
change-Id: I8966097945b33cb866f4642b98b3d1a4beabfad7
Add cdp function to get the peer extended rate and link stats.
This change is to support user level command to flush mld/link
peer extended link and rate stats.
cfg80211tool wifiX get_peer_extd_rate_link_stats <mac_addr>
Change-Id: I20cd2b38b242008b95aedc5f9914088a149093dd
CRs-Fixed: 3278042
When AP vap disconnect aburputly or by doing channel switch then for WDS
node, client disconnect event is not sent to IPA driver, hence IPA is
not aware of any new wds client coming behind that peer as the previous
delete event is not handled properly
Fix is to send wds client disconnect event when ast entry are flushed.
CRs-Fixed: 3271481
Change-Id: Id507f543c8f4cb8f69e26ba6ca3a23787af21ed7
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Use WLAN_CONFIG_TX_DELAY to enable HW Tx delay for both
SAWF and non-SAWF stats.
Change-Id: I6db7d386c0e3654f53398dcba1db7c5568544b0c
CRs-Fixed: 3262425
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
