Add control frame stats accounting support.
Accumulate both per peer BAR and NDPA counts in Tx and Rx per PPDU stats
path. Accumulate per peer RTS success and failure count only in per PPDU
Tx stats path.
Change-Id: I78fb3546cd831559e208a7330feb2eb67b9a28de
CRs-Fixed: 3313435
Before we are updating RSSI params directly into mon_rx_status
this structure will reset every PPDU this breaks iwconfig,
wlanconfig and monitor packet RSSI values.
Fix added to storing the values in the mon_pdev.
Change-Id: I9f8fa776c65cbad84fac5e8c2f65b3fce1386e20
CRs-Fixed: 3276503
Loop is continuing as chain index is getting assigned to zero inside loop.
Adding check for chain index to avoid infinite looping.
Change-Id: Ifff67c00b15d12195e5a3bf554de1529511c400f
CRs-Fixed: 3261913
use msdu_count and index to occupy buffer headroom within mpdu.
new mechanism to debug buffer while using pf tags enabled
Change-Id: I1b7d8a1d7ec93f51869119294d2f0b14e3909fe9
CRs-Fixed: 3217284
Update RSSI specific parameter from beryllium
specific path to common path as part of
extending feature for lithium also.
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I4e35d873db6d1ad03d86694a8d36decffe409a0e
CRs-Fixed: 3231120
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
calculate rssi_comb and rssi per chain values using
parameters received from the fw.
Change-Id: Ide56549c7d7ee9bde609dc6764013d509f7ccac0
CRs-Fixed: 3157484
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
Populate rate index in user specific rx ppdu indication.
Also correct the computation of total retries in rx ppdu indication.
Change-Id: I07c55260def9d2f1490729b6390bca3d98085c63
CRs-Fixed: 3156428
1. Drop the received undecoded frame if error code
abort reason not matched with configured error mask.
2. Reset phy error mask during undecoded capture mode reset.
Change-Id: I162ac1b60ceb5a4b5a87ff2d2186f2e67815f580
CRs-Fixed: 3134562
Display phyrx aborted undecoded frame count and the aborted
reason statistics as part of pdev rx mon stats.
Change-Id: Ia86074e62af3179855734b47801715abd1899fe1
CRs-Fixed: 3123540
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
In order to support flow overide feature,
AST table has to be split between RxPCU and DDR.
With this split, RX monitor cannot make use of
ast_index to fetch peer as it is not from DDR.
So make use of sw_peer_id to fetch peer.
This sw_peer_id is derived from RX_MPDU_STAT_START_TLV
Remove the spinlock on unsused variable i.e ast->lock.
These changes were overwritten by monitor segregation
effort, hence bringing back again.
Change-Id: I339f4296562e3b4dfd6f3a71102385e395f00268
CRs-Fixed: 3108200
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
modify dp_getmodulation and dp_getrateindex to pass puncturing mode
update DP_RATE_TABLE_SIZE to support 11BE
Change-Id: I7f59b29c18d882b541dca0477c7ed6c8cff4da59
CRs-Fixed: 3098366
Stats avg_rx_rate and last_snr for peer are updated in Rx PPDU
indication path. Logic for updation of these stats is incorrect.
Correct the computation of these stats.
Change-Id: I276d0d6c81d45818bf771c3c0565fe4bb259c49d
CRs-Fixed: 3091679
Add function pointer to update stats for LI and WKK
Add new fields in structure cdp rx stats
CRs-Fixed: 3071271
Change-Id: I6a1d7afbdfe47d171335d55bf66d210d785f5a03
Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
This change will enable packet logging for the fragments
from RX monitor status ring and send it to the pktlog module
for post processing through WDI event.
Change-Id: I283a20e7d0fa1f9b88223a989beda529beff6718
CRs-Fixed: 3074184
Fix the invalid VAP instance error seen when RCC is
enabled and ol_ath_stats (enhanced stats) feature is
disabled case.
Populate gI as well similar to other rate stats in
CFR handler where this information would not be
available if ol_ath_stats is disabled.
CRs-Fixed: 3056621
Change-Id: Id1af6359408cb977ba0becf298121ee10dd5ef72
If ppdu rssi unit is dbm, need convert to db for API:
qdf_nbuf_update_radiotap, only need convert once for first mdpu in the
ppdu. if convert for each mpdu, wrong rssi will be saved.
Change-Id: I85e92121ddb289e3513022ff092083825197efb4
CRs-Fixed: 3057041
- Features common to both Li and BE and
their APIs are retained files at dp/wifi3.0/monitor.
- New monitor ops are introduced if there
is a requirement for divergence of API.
- Diverged API definitions for 1.0 are captured
in this change.
All of code in below files are moved to 1.0
- dp_rx_mon_dest.c -> 1.0/dp_rx_mon_dest_1.0.c
- dp_rx_mon_status -> 1.0/dp_rx_mon_status_1.0.c
Only Li and HMT specific are moved for below file
- dp_mon_filter.c -> 1.0/dp_mon_filter_1.0.c
- dp_mon.c -> 1.0/dp_mon_1.0.c
Change-Id: I44d163b27565b86068d80e1d97ec11d0b4a081d4
CRs-Fixed: 2991248
- dp/wifi.3.0/monitor/ => directory for monitor specific code
- dp_rx_mon.c: status TLV procesing + packet buffer processing
- dp_rx_mon.h: Rx monitor header file common for Li and Be
- dp_mon_filter.c: Monitor filter configuration
- dp_mon_filter.h: Monitor filter header file common for Li and BE
- 1.0/ => directory for Lithium specific handling
- dp_rx_mon_1.0.h: Rx Monitor specific header file
- dp_rx_mon_dest_1.0.c: Packet buffer processing
- dp_rx_mon_status_1.0.c: status TLV processing
- dp_mon_filter_1.0.c: Rx Filter configuration
- dp_mon_filter_1.0.h: Rx Filter configuration header
- dp_mon_1_0.h - Li specific monitor ops
- dp_mon_1_0.c - Li monitor ops handling
- 2.0/ => directory for BE specific handling
- dp_rx_mon_2.0.h: Rx Monitor specific header file
- dp_rx_mon_2.0.c: Packet buffer processing
- dp_rx_mon_status_2.0.c: status TLV processing
- dp_tx_mon_2.0.h: Tx Monitor specific header file
- dp_tx_mon_2.0.c: Packet buffer processing
- dp_tx_mon_status_2.0.c: status TLV processing
- dp_mon_filter_2.0.c: Rx and Tx Filter configuration
- dp_mon_filter_2.0.h: Filter configuration specific header
- dp_mon_2.0.h: BE specific monitor ops and defs header file
- dp_mon_2.0.c: BE specific monitor ops handling
Change-Id: I74b5408460b5f2f4b31f73947b55d97dfe3b971e
CRs-Fixed: 2991215
