Populate the agile frequency in SAMP message irrespective of
the current Spectral mode.
CRs-Fixed: 2688422
Change-Id: I2a897449d37a69af2144c9f9710612d6d4a13e8c
Add support for processing the start scan response
WMI event. FW provides the necessary information to
segregate FFT bins to pri80, 5 MHz and sec80 in
160/165 MHz. Also, cfreq2 and the channel width is
provided to FW via WMI command.
CRs-Fixed: 2672081
Change-Id: I666b6c18a63d5d01117aa9cbd611691c6f8b2793
Some targets have a single synthesizer and it allows
a single Spectral detector to scan in 160 MHz /165 MHz.
Enable Agile Spectral scanning in 160 MHz / 165 MHz for
such targets. Agile creq2 will be populated in the WMI
command after WMI interface changes are merged.
CRs-Fixed: 2648480
Change-Id: I8522cbeeab29ac41479e3041eea376b081c0758a
QCN9000 has the capability to Spectral scan in 165 MHz/
restricted 80p80 mode of operation. Host filters the FFT bins
corresponding to the additional 5 MHz and exports to the
user space via SMAP message.
CRs-Fixed: 2630960
Change-Id: I54ec36968cb0c8d5a68ff39029004b08936cb91e
Currently 160 and 80+80 MHz modes are handled together in
Spectral module. Differentiate between 160 and 80+80 MHz
to support new features like restricted 80+80
which are applicable only with 80+80 MHz.
CRs-Fixed: 2630729
Change-Id: I3e9fdd0e2d22a0bca7d37445df7fb1f1bab023c8
Till IPQ8074/IPQ8074_V2 each Spectral detector was capable of
doing scan up to 80 MHz. But in QCN9000 each Spectral detector
is capable of doing scan up to 160 MHz. As a result there will
be only one Spectral report in 160/80p80 MHz. Modify Spectral
Rx path to support single Spectral report in 160 MHz.
Change-Id: I9639cdc6adc6ad80e2769571b06d2a2021d699bc
CRs-Fixed: 2619544
For QCN9000 max FFT size supported is 9 for 20 MHz and 10
for all other bandwidths. Add FFT bin size max based on
bandwidth to support this requirement.
Change-Id: If383dc914937d68c9f4781463a3a965c73bc78f1
CRs-Fixed: 2617674
Modularise the logic of FFT bin length adjustment SWARs and
Spectral FFT report logging logic.
Change-Id: Ia1382e3bdd78589c5192263d23e31bc74e2bfbbd
CRs-Fixed: 2599080
Add a new member to SAMP structure describing the channel width of
Agile Spectral scan.
Change-Id: Ib27fe9ed63bf8f89c59762150fb58943e6bcf7ea
CRs-Fixed: 2582670
Add Agile Spectral frequency to Spectral SAMP message and populate the
same. This coexists with the pre-existing operational frequency in
SAMP message for the sake of flexibility.
Change-Id: Iadb8efeaac924df5b0ac9a83f630206b2ef93052
CRs-Fixed: 2545763
Spectral generation III hardware sets the Spectral primary 80 MHz
(pri80) indication in Spectral Summary reports to inform software
whether the Spectral sample was gathered on the primary 80 MHz
segment. But this may also be set in the case of Spectral scans
intended to be carried out on the Agile frequency or secondary 80 MHz,
due to a channel switch of the Spectral chain from Agile/secondary 80
MHz to primary 80 MHz. Software can ignore samples for which the pri80
indication is set for Agile mode or for secondary 80 MHz in normal
mode.
Add and populate fields for pri80 indication, one intended for primary
80 MHz/Agile and the other for secondary 80 MHz.
CRs-Fixed: 2524733
Change-Id: If592d664cebfe1e08026e55d4031c74d9a9db2e0
Change Spectral report processing logic to handle
Agile Spectral reports. 160 MHz state machine is not
affected by Agile Spectral reports.
CRs-Fixed: 2458359
Change-Id: Iead6427f57edddd61f7d64a961cc6d936d54ab9e
Add an array bounds check for the FFT bin arrays in SAMP message so
that they do not overflow even if an unexpectedly high FFT bin count
parameter is requested by the caller. Also reflect FFT counts limited
by bounds check into SAMP message. These changes act as an additional
guard sequence - functionality for the calling path itself to reject
samples that exceed the expected FFT bin count or have other
unexpected issues will be added in the future based on target side
profiling.
Change-Id: I4af24f623691cc2c2b04243cb64f05d159f035f6
CRs-Fixed: 2348397
Remove unused variable temp_samp_msg_len from
target_if_spectral_create_samp_msg(). This variable does get updated,
but is ultimately unused. By removing it, we save processor cycles
which would otherwise be wasted on the update operations occurring for
each Spectral sample.
Change-Id: Ib5ca5598d5bee6cc15ca72e9e002239d2e76fd6c
CRs-Fixed: 2349113
For HK V2 each fft bin is 2 bytes due to
some HW limitations. To fix this modify the
fftbin size WAR to convert 2 byte fft bins to 1 byte
and forward to applications via SAMP message.
CRs-Fixed: 2319415
Change-Id: I6c27d6804ddaf91ed9e6695e0b21a81115744fff
For generation 3 spectral reports for the 80 MHz segments
come as part of different events. To deal with this a
state machine is added to report handler. Noise floor
value of the lowest chain in the chain mask is populated
in the SAMP message.
CRs-Fixed: 2236331
Change-Id: Ie24426449cf8503c9d7f7c30ca617a6697ca2b5e
Add new fields such as agc_total_gain, sscan_gainchange
to the Spectral SAMP message.
CRs-Fixed: 2291499
Change-Id: Ia6a9fd742c2ee98fd9d7102f0d8c66dcd22a1614
Process spectral summary and search fft report for
gen3 spectral HW. Add the frame work to register to
Direct dma module.
CRs-Fixed: 2184019
Change-Id: I4e2869d9c2887767d58685533265cc93c908b697
-Initialize the default Configuration as
gen2 for spectral module on MCL.
-Add support to general netlink socket.
Change-Id: Iab06f66d18c4791f0ff5483781634df2a7268ddb
CRs-Fixed: 2183870
Spectral Netlink related APIs are currently present in
target_if layer, move them to os_if layer.
Change-Id: I86a5495f6ec8aa85a2e9639902503a522b023f8e
CRs-Fixed: 2151548
Current Spectral module uses qdf_print. To improve the control over
logging, use module level logging
CRs-Fixed: 2165341
Change-Id: I205991347453c4dcc424ba1958e309b7c5fb71a0
Current target_if spectral layer code is not following coding
convention rules in some places.
Change-Id: I1c0e78c6cdbe97db657c341d74582567a29a86b0
CRs-Fixed: 2151555
Removing WIN specific structures 'scn' and 'ic'
from the spectral module in cmn_dev
CRs-Fixed: 2146258
Change-Id: Ie4def4dfb401f4b1a5920277f8fa79acb67dd46b
As part of second phase of Spectral Analysis(SA)
convergence [WIN & MCL], spectral module code is being moved to cmn_dev.
Also includes fixes for checkpatch.
CRs-Fixed: 2146231
Change-Id: I939509193786b0bd2cbd5f1af64d4a94739a2af5
