Post the LFR2 Candidate found indication to low priority scan queue
instead of SME queue to maintain order with beacon/probe frames
from Scan queue.
Change-Id: I5e8a6247a7d5200371d776bce3436104a5ba2df2
CRs-Fixed: 2226234
Allow beacon frames received from Ext Scan or EPNO scan through
the filter into PE queue.
Change-Id: I491875f0e48bd2f317402b416598fe6e940e02a1
CRs-Fixed: 2226231
Register a callback to scan module for beacon frames and handle
the beacon with the mac_ctx bcn/probe filter for SAP sessions.
This will allow beacon frames from the same channel as active SAP
sessions to be processed by the ap_beacon_process for SAP
protection mechanism implementation.
Change-Id: Idb0c1e22ba55fa683a7514d70ba5abe609263829
CRs-Fixed: 2226228
Add filter structures in global mac context and apply the filter for
beacon/probe frames received in pe_handle_mgmt_frames before posting
the frames to PE queue.
Change-Id: Ic0e574705764c1bb247977a4c86e394b47941f5b
CRs-Fixed: 2226223
Register the new low priority QDF_MODULE_ID_SCAN queue to the scheduler
thread to handler beacon/probe frames and scan events.
Change-Id: I80c9b6bbbce97942d188f8a7941a3937130d7c8e
CRs-Fixed: 2226222
Currently wlan_hdd_wext.h defines some IE-related macros, but these
macros are independent of wireless extensions, so relocate them as
part of the plan to properly featurize wireless extensions.
Change-Id: I34b2b220087e946f662741fe549a980884b97842
CRs-Fixed: 2227954
Function wlan_hdd_set_mon_chan() is currently located in
wlan_hdd_wext.c, but this function is independent of wireless
extensions, so relocate it as part of the plan to omit wlan_hdd_wext.c
from the build when wireless extensions is not enabled.
Change-Id: I187305c1f01c7a3cb72f55a0ee885c4f4f0277aa
CRs-Fixed: 2227097
Change the path to pick up the latest v2 version of the
HW headers for Napier 11AX SoD
Change-Id: I0f8a504e3562fc8fb1a5c2d5f4529ca2c7ab9761
CRs-Fixed: 2188755
If CHAN_HOP_ALL_BANDS_ENABLE enable, CSA will miss in 80211h case.
CSA should be sent no matter CHAN_HOP_ALL_BANDS_ENABLE enable or not.
Change-Id: I62312fd5717910d23fdd8ce77c29ad2d9ef11567
CRs-Fixed: 2218108
Add support to process MU EDCA param set in assoc response
frames and send the params to FW.
Change-Id: Ia492d1212b3c357647a89e4f98d3cfdc7ff7bbac
CRs-Fixed: 2220227
Avoid userspace overwrite in drv_cmd_get_ibss_peer_info_all by
intersecting the max output buffer size with the total length of the
userspace buffer. This avoids the overwrite in cases where the allocated
userspace buffer is smaller than the max output buffer size.
Change-Id: I77f25c50bbe9d0b966a5c319297e3e2dca4b6280
CRs-Fixed: 2222879
Move hdd_request_manager to qcacmn osif layer, which will be
used by CP_STATs component.
Change-Id: Iab64ebb837d7c2c7411905b84306fbb9990a4bac
CRs-Fixed: 2220069
Add change to allow randomizing mac address used in STA mode RTT
ranging using ini param control.
Change-Id: Ief3814ef758476d2617d8176daade2128c2b250a
CRs-Fixed: 2205953
Currently there is no provision to decide delay between two roam
scans in firmware. With these new ini's, driver wants to expose
control to decide delay between roam scans:
Add ini "min_delay_btw_scans" to set minimum duration allowed between
two consecutive roam scans. Fw should not allow roam scan if duration
between two consecutive roam scan is less than min_delay_btw_scan.
Add ini "roam_trigger_reason_bitmask" to set default value of
bit-mask containing roam_trigger_reasons for which
min_delay_btw_scans constraints should be apply.
Change-Id: I2af9d5dc8e6919eeb90251d3d744e3f07705e776
CRs-Fixed: 2221779
Fix condition checked before programming user's requested chainmask to
firwmare. Get current firmware advertised phy cap for non-dbs phymode
and check if it supports all chains for tx/rx 2g and 5g.
Change-Id: I3fcef315f478403955ce400b3ba6d138a8006a01
CRs-Fixed: 2202544
DUT sent directed probe requests as malformed
packets during heart beat failure scenario.
Join request structure holds the additional scan IE buffer
which contains IE's sent as part of the join request.
During the join request processing this buffer is updated
by deleting the extended capabilities IE but the buffer length
variable is not updated accordingly which caused malformed
probe request.
After deleting the extended capabilities IE, additional
scan ie buffer length also updated accordingly.
Change-Id: I1129123e76dffe03ac409109dbee02caabf60efa
CRs-Fixed: 2224287
Tx context is holding on to reference to msdu, meanwhile Tx completion
freed the msdu, remove redundent qdf_nbuf_reset_num_frags(msdu)
Change-Id: I4c51f6e61c19147d2d4dafbd19bdfc3029a872ab
CRs-Fixed: 2222024
In hdd_driver_rxfilter_comand_handler(), when kstrtou8() fails to parse
the input string, the value of an uninitialized @type local is logged.
To avoid leaking stack memory, avoid logging the value of @type if the
parsing fails.
Change-Id: I46b21cdb138927b3edc406014450447c58a0d977
CRs-Fixed: 2221085
Register CSR scan requester when csr_start(), but didn't unregister it
when csr_stop(). It might run out scan requester buffer.
Change-Id: I95472027c927ae0c0bc1869338cffad6bbacf0ff
CRs-Fixed: 2222492
During the system reboot when the firmware goes offline before the
driver unload there is no way to detect whether the it is because
of the reboot or a assert in the firmware. So, the driver waits
for the firmware to recover before continuing with unloading
the device.
Since this is a reboot case the firmware will not respawn the
execution and host driver is struck.
To mitigate the issue register a reboot notifier with the kernel
and if reboot is triggered proceed with a fake unload.
Change-Id: I33d14c393930e9ee737d38ffdb26e921fb057f29
CRs-Fixed: 2211776
RxLDPC is disabled in wiphy 5g capability due
to which hostapd is failed to start in 5G channel
with RXLDPC enabled.
Read the RxLDPC capability value of 5G from
single MAC mode and update wiphy 5g band capability
structure to enable the RxLDPC.
Change-Id: Iec2b3674207d5f9ec13a40e110342d6b67ca391c
CRs-Fixed: 2215101
Currently hdd_display_stats_help() is a public function exported by
wlan_hdd_wext.h. But this function is only used internally within
wlan_hdd_wext.c, so remove the public prototype and instead make the
function static.
Change-Id: Iaed10720f0f325794481bbb7ad9f743deb6b7b15
CRs-Fixed: 2227013
A new data structure, qdf_flex_mem, was added to the common code repo.
Add qdf_flex_mem.o to the Kbuild.
Change-Id: If3ee8ad486578574d476d5ce77ce1ae9bb513d4e
CRs-Fixed: 2224551
wdi2.0 feature adds extra 2 bytes to frag_header and thus hdr_len
to IPA HW also adds 2 bytes. This change breaks pre-wdi2.0 platform
with WiFi FW discarding all TX traffic since packet payload is
with an extra 2-byte offset.
Fix is to add frag_header structure with pre-wdi2.0 pattern.
Change-Id: I467a05bab4111a305ae23250c61cecc050821611
CRs-Fixed: 2047714
Add new ini item "enable_ftopen" to enable/disable FT open
feature. There is no ini currently to disable only FT open.
Change-Id: I18280d9de77857b15698eb233ba4ec71089beb06
CRs-Fixed: 2214766
TPC IE, transmit power value reports zero in beacon when operating
as P2P-GO or SAP.
Fix is to populate appropriate value of tx power in TPC report.
Change-Id: Iae52d7bb6a94d167a6bc6f981d62be6f7c12e0c1
CRs-Fixed: 2224187
The routine wma_unified_debug_print_event_handler logs the data from debug
print event handler. The param event data from firmware is copied to a
destination buffer .If the maximum size of the data exceeds or equals
BIG_ENDIAN_MAX_DEBUG_BUF for big endian hosts then possible OOB write will
occur in wma_unified_debug_print_event_handler. For other hosts, OOB read
could occur if datalen exceeds maximum firmware message size
WMI_SVC_MAX_SIZE.
Add check to validate datalen doesnot exceed the maximum firmware msg size
WMI_SVC_MAX_SIZE. Return failure if it exceeds.
Add check to ensure datalen doesnot exceed or equal the maximum buffer
length value for big endian hosts BIG_ENDIAN_MAX_DEBUG_BUF.
Add null termination at the end of the data recieved from the firmware.
Change-Id: Ibb662cb8e17ef8be8b7591308c422a78b71e331a
CRs-Fixed: 2222533
Change "qcacld-3.0: Remove unused WLAN_FEATURE_RX_FULL_REORDER_OL
macro" (Change-Id I72e770874150cbac69e8efbb9e5dd7027a2e8869) removed
one reference to macro WLAN_FEATURE_RX_FULL_REORDER_OL but left one,
so now remove that one as well.
Change-Id: I64d4042b8f129cb6ef85057652cbf5c244891b8d
CRs-Fixed: 2226541
When SSR is in progress, WMI commands for peer and vdev deletion
will not be sent to FW. Do not wait for peer deletion for it will
always lead to timeout since peer delete command will not be sent.
And the check is not needed since vdev delete command will not be
sent, either.
Change-Id: Ib6f921a7c7ff09bf30ed19b443a30542db2b51a3
CRs-Fixed: 2217366
The refactored Kbuild has introduced build errors when the driver is
built using LLVM. The primary issue is that the pre-processing stage
introduces many checks that are not present when using GCC. To avoid
these issue include the conditional compilation macros in the
pre-processing stage.
Change-Id: I9b4a5b41523ae6e3055b4b9ae021322acade8a5f
CRs-Fixed: 2226196
The SoftAP VSTA feature was introduced to overcome a limitation in a
prior version of WLAN hardware. Since the WLAN hardware supported by
this driver does not have this limitation, remove the feature code.
Change-Id: I1f2fe31b294fb7b2da1fa8619b3380412c5d872e
CRs-Fixed: 2224817
There could be an abnormal situation occurs in IPA pipes suspend
process if HDD_IPA_AP_DISCONNECT event sent while WDI pipes are still
active.
Fix to send HDD_IPA_AP_DISCONNECT after all clients disconnected.
Change-Id: I7ad757834ec22384d07236363d135009a9710bee
CRs-Fixed: 2192239
Change "qcacmn: Propagate config parameters to datapath" (Change-Id
Icbdc835a51a6fea87c06174e9fc63d5d007aec1d in qca-wifi-host-cmn)
removed the only reference to macro WLAN_RX_HASH, so remove the macro
along with the controlling config item.
Change-Id: I2aab4184939f99b4966b2106ff4ca7666022ccbb
CRs-Fixed: 2224816
