fw-api: CL 3915919 - update fw common interface files

Change-Id: I72ebcfd746fe386d7758de55d7079da3606fa823
WMI: define msgs to configure neighbor reporting
CRs-Fixed: 1107600

fw/wmi_services.h

@@ -241,6 +241,7 @@ typedef  enum  {
     WMI_SERVICE_SUPPORT_DIRECT_DMA=146, /* indicates target supports direct DMA,
                                          * host will rely on WMI_DMA_RING_CAPABILITIES to get supported modules */
     WMI_SERVICE_AP_OBSS_DETECTION_OFFLOAD=147, /* Support SAP mode OBSS detection offload */
+    WMI_SERVICE_11K_NEIGHBOUR_REPORT_SUPPORT=148, /* Support for 11k neighbor report */
 
 
     /******* ADD NEW SERVICES HERE *******/

fw/wmi_tlv_defs.h

@@ -883,6 +883,9 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_sar_get_limits_cmd_fixed_param,
     WMITLV_TAG_STRUC_wmi_sar_get_limits_event_fixed_param,
     WMITLV_TAG_STRUC_wmi_sar_get_limits_event_row,
+    WMITLV_TAG_STRUC_wmi_offload_11k_report_fixed_param,
+    WMITLV_TAG_STRUC_wmi_invoke_neighbor_report_fixed_param,
+    WMITLV_TAG_STRUC_wmi_neighbor_report_offload_tlv_param,
 } WMITLV_TAG_ID;
 
 /*
@@ -1237,6 +1240,8 @@ typedef enum {
     OP(WMI_SAP_OBSS_DETECTION_CFG_CMDID) \
     OP(WMI_PDEV_DMA_RING_CFG_REQ_CMDID) \
     OP(WMI_SAR_GET_LIMITS_CMDID)\
+    OP(WMI_11K_OFFLOAD_REPORT_CMDID) \
+    OP(WMI_11K_INVOKE_NEIGHBOR_REPORT_CMDID) \
     /* add new CMD_LIST elements above this line */
 
 
@@ -1548,6 +1553,19 @@ WMITLV_CREATE_PARAM_STRUC(WMI_WOW_ENABLE_ICMPV6_NA_FLT_CMDID);
 
 WMITLV_CREATE_PARAM_STRUC(WMI_RMV_BCN_FILTER_CMDID);
 
+/*  Offload 11k related requests */
+#define WMITLV_TABLE_WMI_11K_OFFLOAD_REPORT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_offload_11k_report_fixed_param, wmi_11k_offload_report_fixed_param,fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_neighbor_report_11k_offload_tlv_param, offload_neighbor_report_param, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_11K_OFFLOAD_REPORT_CMDID);
+
+/* invoke 11k neighbor report req from FW */
+#define WMITLV_TABLE_WMI_11K_INVOKE_NEIGHBOR_REPORT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_invoke_neighbor_report_fixed_param,wmi_11k_offload_invoke_neighbor_report_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_11K_INVOKE_NEIGHBOR_REPORT_CMDID);
+
 /** Service bit WMI_SERVICE_ROAM_OFFLOAD for Roaming feature */
 /* Roam scan mode Cmd */
 #define WMITLV_TABLE_WMI_ROAM_SCAN_MODE(id,op,buf,len) \

fw/wmi_unified.h

@@ -241,6 +241,7 @@ typedef enum {
     WMI_GRP_REGULATORY,     /* 0x3a */
     WMI_GRP_HW_DATA_FILTER, /* 0x3b */
     WMI_GRP_WLM,            /* 0x3c WLAN Latency Manager */
+    WMI_GRP_11K_OFFLOAD,    /* 0x3d */
 } WMI_GRP_ID;
 
 #define WMI_CMD_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
@@ -877,6 +878,11 @@ typedef enum {
     /* Thermal Throttling SET CONF commands */
     WMI_THERM_THROT_SET_CONF_CMDID,
 
+    /*  Offload 11k related requests */
+    WMI_11K_OFFLOAD_REPORT_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_11K_OFFLOAD),
+    /* invoke neighbor report from FW */
+    WMI_11K_INVOKE_NEIGHBOR_REPORT_CMDID,
+
     /* GPIO Configuration */
     WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_GPIO),
     WMI_GPIO_OUTPUT_CMDID,
@@ -3245,6 +3251,41 @@ typedef struct {
     /* followed by WMITLV_TAG_ARRAY_BYTE */
 } wmi_diag_event_fixed_param;
 
+#define WMI_11K_OFFLOAD_BITMAP_NEIGHBOR_REPORT_REQ  0x1
+
+typedef struct {
+    A_UINT32 time_offset;                   /* positive offset in secs from the time 11k offload command has been received, 0xFFFFFFFF if offset is not valid */
+    A_UINT32 low_rssi_offset;               /* positive offset in dB from current low rssi roaming trigger to send neighbor req, 0xFFFFFFFF if offset is not valid */
+    A_UINT32 bmiss_count_trigger;           /* value 1 is to send neighbor report at 1st BMISS, 0xFFFFFFFF if input is not valid */
+    A_UINT32 per_threshold_offset;          /* percentage offset from the current per_threshold, 0xFFFFFFFF if input is not valid */
+    A_UINT32 neighbor_report_cache_timeout; /* cache timeout in secs after which neighbor cache is not valid in FW, 0xFFFFFFFF if input is not valid */
+    A_UINT32 max_neighbor_report_req_cap;   /* 0xFFFFFFFF if input is not valid, else positive number per every roam, these are the maximum number of
+                                             * neighbor report requests that will be sent by FW after every roam */
+    wmi_ssid ssid;                          /* ssid of current connected AP FW might choose to use this SSID in the neighbor report req frame if it is
+                                             * interested in candidate of the same SSID */
+} wmi_neighbor_report_offload;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_offload_11k_report_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 offload_11k; /* bitmask to indicate to FW what all 11k features are offloaded */
+} wmi_11k_offload_report_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_neighbor_report_offload_tlv_param */
+    wmi_neighbor_report_offload neighbor_rep_ofld_params;
+} wmi_neighbor_report_11k_offload_tlv_param;
+
+#define WMI_INVOKE_NEIGHBOR_REPORT_FLAGS_SEND_RESP_TO_HOST 0x1
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_invoke_neighbor_report_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 flags;
+    wmi_ssid ssid; /* if ssid.len == 0, firmware doesn't include ssid sub-element.
+                    * In that case AP gives all the candidates in ESS without SSID filter
+                    * If host wants to insert ssid subelement in the neighbor report request frame, then it can specify the ssid here */
+} wmi_11k_offload_invoke_neighbor_report_fixed_param;
 
 #define WMI_MAX_PMKID_LEN   16
 #define WMI_MAX_PMK_LEN     64
@@ -21021,6 +21062,8 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_PDEV_SET_RX_FILTER_PROMISCUOUS_CMDID);
         WMI_RETURN_STRING(WMI_SAP_OBSS_DETECTION_CFG_CMDID);
         WMI_RETURN_STRING(WMI_PDEV_DMA_RING_CFG_REQ_CMDID);
+        WMI_RETURN_STRING(WMI_11K_OFFLOAD_REPORT_CMDID);
+        WMI_RETURN_STRING(WMI_11K_INVOKE_NEIGHBOR_REPORT_CMDID);
     }
 
     return "Invalid WMI cmd";

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 482
+#define __WMI_REVISION_ 483
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work