qcacmn: Add QCA vendor command and attributes for RROP

Add QCA vendor command and attributes for vendor specific
Representative RF Operating Parameter (RROP) information. This
information is intended for optional use by external ACS. It provides
guidance values for some RF parameters that are used by the system
during operation, so that external ACS can utilize these to compare
between channels, bands, etc.

CRs-Fixed: 2152786
Change-Id: I911a96ad860331ab7af718c166806ffc7d1c5052

os_if/linux/qca_vendor.h

@@ -248,6 +248,10 @@
  * @QCA_NL80211_VENDOR_SUBCMD_HTT_STATS: Request the firmware
  *     DP stats for a particualr stats type for response evnet
  *     it carries the stats data sent from the FW
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO: Get vendor specific Representative
+ *     RF Operating Parameter (RROP) information. The attributes for this
+ *     information are defined in enum qca_wlan_vendor_attr_rrop_info. This is
+ *     intended for use by external Auto Channel Selection applications.
  */
 
 enum qca_nl80211_vendor_subcmds {
@@ -448,6 +452,7 @@ enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160,
 	QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161,
 	QCA_NL80211_VENDOR_SUBCMD_HTT_STATS = 162,
+	QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163,
 };
 
 enum qca_wlan_vendor_tos {
@@ -3479,6 +3484,9 @@ enum qca_wlan_vendor_external_acs_event_chan_info_attr {
  * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY:External ACS policy such as
  * PCL mandatory, PCL preferred, etc.It uses values defined in enum
  * qca_wlan_vendor_attr_external_acs_policy.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO: Reference RF
+ * Operating Parameter (RROP) availability information (u16). It uses values
+ * defined in enum qca_wlan_vendor_attr_rropavail_info.
  */
 enum qca_wlan_vendor_attr_external_acs_event {
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0,
@@ -3495,6 +3503,7 @@ enum qca_wlan_vendor_attr_external_acs_event {
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11,
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12,
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY = 13,
+	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO = 14,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST,
@@ -5275,6 +5284,77 @@ enum qca_wlan_vendor_attr_spectral_scan_request_type {
 	QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG,
 };
 
+/**
+ * enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative
+ * RF Operating Parameter (RROP) information is available, and if so, at which
+ * point in the application-driver interaction sequence it can be retrieved by
+ * the application from the driver. This point may vary by architecture and
+ * other factors. This is a u16 value.
+ */
+enum qca_wlan_vendor_attr_rropavail_info {
+	/* RROP information is unavailable. */
+	QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_UNAVAILABLE,
+	/* RROP information is available and the application can retrieve the
+	 * information after receiving an QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS
+	 * event from the driver.
+	 */
+	QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_EXTERNAL_ACS_START,
+	/* RROP information is available only after a vendor specific scan
+	 * (requested using QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN) has
+	 * successfully completed. The application can retrieve the information
+	 * after receiving the QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE event from
+	 * the driver.
+	 */
+	QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_VSCAN_END,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rrop_info - Specifies vendor specific
+ * Representative RF Operating Parameter (RROP) information. It is sent for the
+ * vendor command QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO. This information is
+ * intended for use by external Auto Channel Selection applications. It provides
+ * guidance values for some RF parameters that are used by the system during
+ * operation. These values could vary by channel, band, radio, and so on.
+ */
+enum qca_wlan_vendor_attr_rrop_info {
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_INVALID = 0,
+
+	/* Representative Tx Power List (RTPL) which has an array of nested
+	 * values as per attributes in enum qca_wlan_vendor_attr_rtplinst.
+	 */
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_RTPL = 1,
+
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_MAX =
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rtplinst - Specifies attributes for individual list
+ * entry instances in the Representative Tx Power List (RTPL). It provides
+ * simplified power values intended for helping external Auto channel Selection
+ * applications compare potential Tx power performance between channels, other
+ * operating conditions remaining identical. These values are not necessarily
+ * the actual Tx power values that will be used by the system. They are also not
+ * necessarily the max or average values that will be used. Instead, they are
+ * relative, summarized keys for algorithmic use computed by the driver or
+ * underlying firmware considering a number of vendor specific factors.
+ */
+enum qca_wlan_vendor_attr_rtplinst {
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0,
+
+	/* Primary channel number (u8) */
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1,
+	/* Representative Tx power in dBm (s32) with emphasis on throughput. */
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2,
+	/* Representative Tx power in dBm (s32) with emphasis on range. */
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3,
+
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX =
+		QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST - 1,
+};
+
 #if !(defined (SUPPORT_WDEV_CFG80211_VENDOR_EVENT_ALLOC)) &&	\
 	(LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)) && 	\
 	!(defined(WITH_BACKPORTS))