samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

qcacmn: Remove WMA header file dependency to fix WIN compilation

Browse Source 
Remove dependency of WMA header files in common wmi layer.

Change-Id: I48978e51ca6bd4416420ee66746d5bfe7adae3c9
CRs-Fixed: 1008872
This commit is contained in:
Govind Singh
2016-04-27 16:20:05 +05:30
committed by Vishwajith Upendra
parent 5fed03b8d1
commit fb780d395b
1 changed files with 71 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

78
wmi_unified_param.h
View File

@@ -71,6 +71,8 @@
#define WMI_NOISE_FLOOR_DBM_DEFAULT (-96)
#define WMI_MAC_IPV6_ADDR_LEN 16
#ifdef WLAN_NS_OFFLOAD
#define WMI_OFFLOAD_DISABLE 0
#define WMI_OFFLOAD_ENABLE 1
/* support only one IPv6 offload */
#define WMI_MAC_NS_OFFLOAD_SIZE 1
/* Number of target IP V6 addresses for NS offload */
@@ -261,6 +263,17 @@ typedef enum {
#define MAX_NUM_CHAN 128
/* WME stream classes */
#define WMI_AC_BE 0 /* best effort */
#define WMI_AC_BK 1 /* background */
#define WMI_AC_VI 2 /* video */
#define WMI_AC_VO 3 /* voice */
#define WMI_TID_TO_AC(_tid) (\
(((_tid) == 0) || ((_tid) == 3)) ? WMI_AC_BE : \
(((_tid) == 1) || ((_tid) == 2)) ? WMI_AC_BK : \
(((_tid) == 4) || ((_tid) == 5)) ? WMI_AC_VI : \
WMI_AC_VO)
/**
* struct vdev_create_params - vdev create cmd parameter
* @if_id: interface id
@@ -1137,14 +1150,7 @@ struct wmi_mgmt_params {
void *pdata;
uint16_t desc_id;
uint8_t *macaddr;
#ifndef WMI_NON_TLV_SUPPORT
/* Following elements should be moved to WMA
*/
void *tx_complete_cb;
void *tx_ota_post_proc_cb;
struct wmi_desc_t *wmi_desc;
void *qdf_ctx;
#endif
};
/**
@@ -1662,6 +1668,14 @@ enum {
WMI_STA_RX_DATA_OFFLOAD = 0x01,
};
/**
* enum extscan_configuration_flags - extscan config flags
* @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching
*/
enum wmi_extscan_configuration_flags {
WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001,
};
/**
* enum extscan_report_events_type - extscan report events type
* @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full
@@ -1998,6 +2012,14 @@ struct wifi_scan_cmd_req_params {
};
#define WMI_CFG_VALID_CHANNEL_LIST_LEN 100
/* Occupied channel list remains static */
#define WMI_CHANNEL_LIST_STATIC 1
/* Occupied channel list can be learnt after init */
#define WMI_CHANNEL_LIST_DYNAMIC_INIT 2
/* Occupied channel list can be learnt after flush */
#define WMI_CHANNEL_LIST_DYNAMIC_FLUSH 3
/* Occupied channel list can be learnt after update */
#define WMI_CHANNEL_LIST_DYNAMIC_UPDATE 4
/**
* struct plm_req_params - plm req parameter
@@ -6303,5 +6325,47 @@ struct wmi_power_dbg_params {
uint32_t args[WMI_MAX_POWER_DBG_ARGS];
};
/**
* struct wmi_fw_dump_seg_req - individual segment details
* @seg_id - segment id.
* @seg_start_addr_lo - lower address of the segment.
* @seg_start_addr_hi - higher address of the segment.
* @seg_length - length of the segment.
* @dst_addr_lo - lower address of the destination buffer.
* @dst_addr_hi - higher address of the destination buffer.
*
* This structure carries the information to firmware about the
* individual segments. This structure is part of firmware memory
* dump request.
*/
struct wmi_fw_dump_seg_req {
uint8_t seg_id;
uint32_t seg_start_addr_lo;
uint32_t seg_start_addr_hi;
uint32_t seg_length;
uint32_t dst_addr_lo;
uint32_t dst_addr_hi;
};
/**
* enum wmi_userspace_log_level - Log level at userspace
* @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection
* @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log
* level with minimal user impact. This is the default value.
* @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily
* trying to reproduce a problem, wifi performances and power can be impacted
* but device should not otherwise be significantly impacted
* @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to
* actively debug a problem
*
* Various log levels defined in the userspace for logging applications
*/
enum wmi_userspace_log_level {
WMI_LOG_LEVEL_NO_COLLECTION,
WMI_LOG_LEVEL_NORMAL_COLLECT,
WMI_LOG_LEVEL_ISSUE_REPRO,
WMI_LOG_LEVEL_ACTIVE,
};
#endif /* _WMI_UNIFIED_PARAM_H_ */