qcacld-3.0: Add ini to raise bug on SSR re-init failure

qcacld-2.0 to qcacld-3.0 propagation

Currently, If SSR re-init get failed then host raise VOS_BUG.
In this type of cases, OEM might prefer not to crash the device
instead want wlan recovery using driver unload followed by load.

Change-Id: If433aae949326af6a20df2190dd7356f211c4103
CRs-Fixed: 1017278

core/hdd/inc/wlan_hdd_cfg.h

@@ -3405,6 +3405,18 @@ enum dot11p_mode {
 #define CFG_ADAPTIVE_EXTSCAN_DWELL_MODE_MAX      (4)
 #define CFG_ADAPTIVE_EXTSCAN_DWELL_MODE_DEFAULT  (0)
 
+/*
+ * This parameter will help to debug ssr reinit failure issues
+ * by raising vos bug so dumps can be collected. If OEM
+ * wants to avoid this crash, just disable this parameter.
+ * wlan driver will only recover after driver unload and load.
+ * Default: Enable
+ */
+#define CFG_BUG_ON_REINIT_FAILURE_NAME     "g_bug_on_reinit_failure"
+#define CFG_BUG_ON_REINIT_FAILURE_MIN      (0)
+#define CFG_BUG_ON_REINIT_FAILURE_MAX      (1)
+#define CFG_BUG_ON_REINIT_FAILURE_DEFAULT  (1)
+
 /*
  * This parameter will set the algo used in dwell time optimization during
  * pno scan. see enum wmi_dwelltime_adaptive_mode.
@@ -4178,6 +4190,7 @@ struct hdd_config {
 	uint8_t adapt_dwell_passive_mon_intval;
 	uint8_t adapt_dwell_wifi_act_threshold;
 	bool bug_report_for_no_scan_results;
+	bool bug_on_reinit_failure;
 #ifdef WLAN_FEATURE_NAN_DATAPATH
 	bool enable_nan_datapath;
 	uint8_t nan_datapath_ndi_channel;

core/hdd/src/wlan_hdd_cfg.c

@@ -3965,6 +3965,14 @@ REG_TABLE_ENTRY g_registry_table[] = {
 		     CFG_INDOOR_CHANNEL_SUPPORT_MIN,
 		     CFG_INDOOR_CHANNEL_SUPPORT_MAX),
 
+	REG_VARIABLE(CFG_BUG_ON_REINIT_FAILURE_NAME, WLAN_PARAM_Integer,
+		     struct hdd_config, bug_on_reinit_failure,
+		     VAR_FLAGS_OPTIONAL |
+		     VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT,
+		     CFG_BUG_ON_REINIT_FAILURE_DEFAULT,
+		     CFG_BUG_ON_REINIT_FAILURE_MIN,
+		     CFG_BUG_ON_REINIT_FAILURE_MAX),
+
 	REG_VARIABLE(CFG_INTERFACE_CHANGE_WAIT_NAME, WLAN_PARAM_Integer,
 			struct hdd_config, iface_change_wait_time,
 			VAR_FLAGS_OPTIONAL | VAR_FLAGS_RANGE_CHECK,
@@ -5590,6 +5598,9 @@ void hdd_cfg_print(hdd_context_t *pHddCtx)
 	hdd_info("Name = [%s] Value = [%u]",
 		CFG_IDLE_TIME_NAME,
 		pHddCtx->config->idle_time_conc);
+	hdd_info("Name = [%s] Value = [%d]",
+		CFG_BUG_ON_REINIT_FAILURE_NAME,
+		pHddCtx->config->bug_on_reinit_failure);
 	hdd_info("Name = [%s] Value = [%u]",
 		CFG_INTERFACE_CHANGE_WAIT_NAME,
 		pHddCtx->config->iface_change_wait_time);

core/hdd/src/wlan_hdd_power.c

@@ -1495,6 +1495,7 @@ QDF_STATUS hdd_wlan_re_init(void)
 	hdd_adapter_t *pAdapter;
 	QDF_STATUS qdf_status;
 	int ret;
+	bool bug_on_reinit_failure = CFG_BUG_ON_REINIT_FAILURE_DEFAULT;
 
 	hdd_prevent_suspend(WIFI_POWER_EVENT_WAKELOCK_DRIVER_REINIT);
 
@@ -1511,6 +1512,7 @@ QDF_STATUS hdd_wlan_re_init(void)
 		hdd_alert("HDD context is Null");
 		goto err_re_init;
 	}
+	bug_on_reinit_failure = pHddCtx->config->bug_on_reinit_failure;
 
 	/* The driver should always be initialized in STA mode after SSR */
 	hdd_set_conparam(0);
@@ -1591,7 +1593,8 @@ err_wiphy_unregister:
 err_re_init:
 	/* Allow the phone to go to sleep */
 	hdd_allow_suspend(WIFI_POWER_EVENT_WAKELOCK_DRIVER_REINIT);
-	QDF_BUG(0);
+	if (bug_on_reinit_failure)
+		QDF_BUG(0);
 	return -EPERM;
 
 success: