qcacld-3.0: Add new vendor OUI in default INI to connect in 1x1

The 3rd party AP with Vendor IE OUI 001018, Vendor Data
02 FF 00 9C 00 00 and NSS 4x4 is not able to handle OMN/SMPS
frames sent by DUT in 2.4Ghz. This leads to the AP dropping
the data rates to 1Mbps and low throughput is seen.

This is because the connection is done with NSS 2x2 and when Coex
scenarios occur, the DUT switches dynamically to 1x1 by sending
OMN/SMPS frames. To overcome this issue, the workaround is to
blacklist the above AP and do connection in 1x1 only.

Add the vendor OUI of the 3rd party AP to gActionOUIConnect1x1
default INI string to connect in 1x1.

Change-Id: Idc0f3238e3521bb20c592b44de77216125e69504
CRs-Fixed: 2352946

core/hdd/inc/wlan_hdd_cfg.h

@@ -4863,7 +4863,12 @@ enum hdd_link_speed_rpt_type {
  *   OUI data Len : 00
  *   Info Mask : 35 - Check for NSS, VHT Caps and Band
  *   Capabilities: 6C - (NSS == 3 or 4) && VHT Caps Preset && Band == 2G
- *
+ * OUI 5 : 001018
+ *   OUI data Len : 06
+ *   OUI Data : 02FF009C0000
+ *   OUI data Mask: BC - 10111100
+ *   Info Mask : 25 - Check for NSS and Band
+ *   Capabilities: 48 - NSS == 4 && Band == 2G
  * This ini is used to specify the AP OUIs with which only 1x1 connection
  * is allowed.
  *
@@ -4876,7 +4881,7 @@ enum hdd_link_speed_rpt_type {
  * </ini>
  */
 #define CFG_ACTION_OUI_CONNECT_1X1_NAME    "gActionOUIConnect1x1"
-#define CFG_ACTION_OUI_CONNECT_1X1_DEFAULT "000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 00037F 00 35 6C"
+#define CFG_ACTION_OUI_CONNECT_1X1_DEFAULT "000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 00037F 00 35 6C 001018 06 02FF009C0000 BC 25 48"
 
 /*
  * <ini>