qcacld-3.0: Remove cfg.txt file

cfg.txt content was moved to cfg_proc_msg.c file due
to change in process to populate the CFG items.
Remove unused cfg.txt file.

Change-Id: I2f942b1dcb11a98a75a4c968d79f9ceef44172fa
CRs-Fixed: 2336129

core/mac/src/cfg/cfgUtil/cfg.txt

@@ -1,3743 +0,0 @@
-* Copyright (c) 2014-2015 The Linux Foundation. All rights reserved.
-*
-* Permission to use, copy, modify, and/or distribute this software for
-* any purpose with or without fee is hereby granted, provided that the
-* above copyright notice and this permission notice appear in all
-* copies.
-*
-* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
-* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
-* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
-* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
-* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-* PERFORMANCE OF THIS SOFTWARE.
-*
-* This is the data definition file for the CFG module.
-* Author:         Kevin Nguyen
-* Date:           03/18/02
-* History:-
-* 03/18/02        Created.
-* 08/10/05  ww: add maoe channels to have a complete channel listing: (see WNI_CFG_VALID_CHANNEL_LIST)
-* 08/10/05 ww: WNI_CFG_SCAN_CONTROL_LIST has a new contents
-* --------------------------------------------------------------------
-
-**********************************************************************
-*
-* This file contains the descriptions of all configuration parameters
-* for both STA and AP.
-*
-* OUTPUT:
-* -------
-* The output files are:
-*    wniCfgSta.h     - C header file for STA mode only
-*    wniCfgAp.h      - C header file for both STA and AP
-*    wniCfgSta.bin   - Control and default values for STA system
-*    wniCfgAp.bin    - Control and default values for AP system
-*
-* PARAMETER DESCRIPTION:
-* ----------------------
-* For each parameter, the description must be on separate lines and
-* exactly as specified below.  [] are comments and should not be included.
-*
-*     [Common info]    parameter_name    type    maxLen    semIndx
-*     [STA flags]      valid    RW    P/NP    RESTART/RELOAD
-*     [STA_NTF]        notification_mask
-*     [STA values]     min    max    value  [for integer]
-*                      length byte1 byte2 ... [for string]
-*     [AP flags]       valid    RW/RO/WO    P/NP    RESTART/RELOAD
-*     [AP_NTF]         notification_mask
-*     [AP values]      min    max    value  [for integer]
-*                      length byte1 byte2 ... [for string]
-*
-* parameter_name:
-*         This will be used as the base name for C macro definition.
-*         Therefore, C syntax rule must be observed.
-*
-* type:
-*        Specifies parameter type
-*            S - variable-length string
-*            I - integer
-*
-* maxLen:
-*        Specifies maximum parameter length in bytes.
-*
-* semIndx:
-*        Specifies semaphore index to use for locking this parameter.
-*        More than one parameters (those belonging to the same group)
-*        can share the same semaphore index.
-*
-* valid:
-*         Specifies if this parameter will be valid in current mode.
-*            V  - Valid
-*            NV - Not valid
-*
-* RW:
-*        Specifies Read/Write mode.
-*            RO - Read only
-*            RW - Read/Write
-*            WO - Write only
-*            XX - Not accessible from host
-*
-* P:
-*        Specifies persistent memory option
-*            P  - Save to persistent memory
-*            NP - No save
-*
-* RELOAD:
-*        Specifies whether setting this requires reloading the MAC module
-*        This attribute can be changed only when SME is in OFFLINE or SUSPEND(OFFLINE) state
-*
-* RESTART:
-*        Specifies whether setting this requires (re)assoc at STA and restart at AP
-*        This attribute can be changed only when SME is in OFFLINE, SUSPEND(OFFLINE),
-*        IDLE or SUSPEND(IDLE) states
-*
-* STA_notification:
-*        Lists modules to be notified in STA mode.  Valid modules are:
-*        HDD, LIM, SCH, ARQ, DPH, NIM, SP, RFP, RHP, TFP.  More than one
-*        modules can be listed on the same line using space or tab as the
-*        separator.  If no notification is required, 'NONE' must be specified.
-*
-* AP_notification:
-*        Lists module to be notified in AP mode.  Valid modules are:
-*        HDD, LIM, SCH, ARQ, DPH, NIM, SP, RFP, RHP, TFP.  More than one
-*        modules can be listed on the same line using space or tab as the
-*        separator.  If no notification is required, 'NONE' must be specified.
-*
-* STA/AP integer values:
-*        min:
-*        Specifies minimum value for an integer parameter.  This field is
-*        ignored if the parameter type is string.  However, this field must
-*        not be omitted.
-*
-*        max:
-*        Specifies maximum value for an integer parameter.  This field is
-*        ignored if the parameter type is string.  However, this field must
-*        not be omitted.
-*
-*        default:
-*        Specifies default value for an integer parameter.  This field is
-*        ignored if the parameter type is string.  However, this field must
-*        not be omitted.
-*
-* STA/AP string values:
-*        len:
-*        The actual length of the string
-*
-*        bytei:
-*        byte i of the string where i varies from 1 to len
-*
-* TABLE GENERATION:
-* -----------------
-*        Table can be generated using keywords '#TABLE' and '#END' as below:
-*
-*        #TABLE  table_name   number_of_row
-*        WNI_CFG_xxxx
-*        .......
-*        .......
-*        #END
-*
-*        The CFG utility will generate the following output:
-*        WNI_CFG_table_xxx_ID    xxx
-*        WNI_CFG_table_xxx_ROW   number_of_rows
-*        WNI_CFG_table_xxx_COL   number_of_columns
-*
-*        These will be followed by the parameter definition for each entry in
-*        the table.  Table is organized in column-major order.
-*
-*        #ENTRY_VALUES 1
-*        0    4    1
-*        0    0    0
-*        #ENTRY_VALUES 2
-*        0    4    2
-*        0    0    0
-*        #ENTRY_VALUES 3
-*        0    4    3
-*        0    0    0
-*        #ENTRY_VALUES 4
-*        0    4    4
-*        0    0    0
-*
-*
-* ENUMERATION
-* -----------
-*        Enumerations can be define using keyword '#ENUM'
-*
-*        #ENUM xxx   val
-*
-*        The cfg utility will generate the following output in the header file
-*        #define paramname_xxx    val
-*
-
-
-*
-* Station ID (changing requires restart)
-*
-
-WNI_CFG_STA_ID    S    6    1
-V    RW    NP RELOAD
-HAL
-6    0x22 0x22 0x44 0x44 0x33 0x33
-V    RW    NP RELOAD
-HAL
-6    0x22 0x22 0x11 0x11 0x33 0x33
-
-*
-* CF Pollable
-*
-
-WNI_CFG_CF_POLLABLE    I    4    1
-NV    RO    NP RESTART
-NONE
-0    0    0
-V    RO    NP RESTART
-NONE
-0    1    0
-
-*
-* CFP Period
-*
-
-WNI_CFG_CFP_PERIOD    I    4    1
-V    RO    NP
-NONE
-0    255   1
-V    RW    NP
-SCH
-0    255   1
-
-*
-* CFP Max Duration
-*
-
-WNI_CFG_CFP_MAX_DURATION    I    4    1
-V    RO   NP
-NONE
-0    65535    30000
-V    RW   NP
-HAL
-0    65535    30000
-
-*
-* SSID (changing requires restart)
-*
-
-WNI_CFG_SSID    S    32    1
-V    RW    NP RESTART
-NONE
-10    1 2 3 4 5 6 7 8 9 0
-V    RW    NP RESTART
-NONE
-10    1 2 3 4 5 6 7 8 9 0
-
-*
-* Beacon Period
-* Can't be changed on STA in infrastructure, ignore notification at SCH
-*
-
-WNI_CFG_BEACON_INTERVAL    I    4    2
-V    RW    NP
-SCH
-0    65535    100
-V    RW    NP
-SCH
-0    65535    100
-
-*
-* DTIM Period
-*
-
-WNI_CFG_DTIM_PERIOD        I    4    2
-V    RO    NP
-NONE
-0    65535    1
-V    RW    NP
-SCH
-0    65535    1
-
-*
-* Default Key Table
-*
-
-#TABLE    WNI_CFG_WEP_DEFAULT_KEY_TABLE    4
-
-WNI_CFG_WEP_DEFAULT_KEY    S    13    4
-V    WO    NP RESTART
-NONE
-0
-V    WO    NP RESTART
-NONE
-0
-
-#END
-
-*
-* WEP Default Key id
-*
-
-WNI_CFG_WEP_DEFAULT_KEYID    I    4    5
-V    RW    NP
-LIM
-0    3    0
-V    RW    NP
-LIM
-0    3    0
-
-#ENUM 0    0
-#ENUM 1    1
-#ENUM 2    2
-#ENUM 3    3
-
-*
-* RTS Threshold
-*
-
-WNI_CFG_RTS_THRESHOLD    I    4    6
-V    RW    NP
-HAL
-0    1048576   2347
-V    RW    NP
-HAL
-0    1048576   2347
-
-*
-* Long Retry Limit
-*
-
-*
-* Fragmentation Threshold
-*
-
-WNI_CFG_FRAGMENTATION_THRESHOLD    I    4    6
-V    RW    NP
-HAL
-256    8000    8000
-V    RW    NP
-HAL
-256    8000    8000
-
-*
-* Maximum Channel Time (TU)
-*
-
-WNI_CFG_ACTIVE_MAXIMUM_CHANNEL_TIME    I    4    9
-V    RW    NP
-NONE
-0    65535    40
-V    RW    NP
-NONE
-0    65535    40
-
-*
-* Maximum Channel Time (TU)
-*
-
-WNI_CFG_PASSIVE_MAXIMUM_CHANNEL_TIME    I    4    9
-V    RW    NP
-NONE
-0    65535    110
-V    RW    NP
-NONE
-0    65535    110
-
-*
-* Join Failure Timeout (TU)
-*
-
-WNI_CFG_JOIN_FAILURE_TIMEOUT    I    4    7
-V    RW    NP
-NONE
-0    65535    3000
-V    RW    NP
-NONE
-0    65535    3000
-
-*
-* Authenticate Failure Timeout (TU)
-*
-
-WNI_CFG_AUTHENTICATE_FAILURE_TIMEOUT    I    4    7
-V    RW    NP
-NONE
-0    65535    1000
-V    RW    NP
-NONE
-0    65535    1000
-
-*
-* Authenticate Response Timeout (TU)
-*
-
-WNI_CFG_AUTHENTICATE_RSP_TIMEOUT    I    4    7
-V    RW    NP
-NONE
-0    65535    1000
-V    RW    NP
-NONE
-0    65535    1000
-
-*
-* Assocation Failure Timeout (TU)
-*
-
-WNI_CFG_ASSOCIATION_FAILURE_TIMEOUT    I    4    8
-V    RW    NP
-LIM
-0    65535 2000
-V    RW    NP
-LIM
-0    65535 3000
-
-*
-* Reassociation Failure Timeout (TU)
-*
-
-WNI_CFG_REASSOCIATION_FAILURE_TIMEOUT    I    4    7
-V    RW    NP
-NONE
-0    65535    1000
-V    RW    NP
-NONE
-0    65535    3000
-
-
-*
-* RA periodicity Timeout (TU)
-*
-
-WNI_CFG_RA_PERIODICITY_TIMEOUT_IN_PS    I    4    7
-V    RW    NP
-HAL
-0    65535    1000
-NV    RW    NP
-NONE
-0    0    0
-
-*
-* PS Data InActivity Timeout (TU)
-*
-
-WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT    I    4    7
-V    RW    NP
-HAL
-1    255    20
-NV    RW    NP
-NONE
-1    255    20
-
-*
-* Supported Rate Set for 11b
-*
-
-WNI_CFG_SUPPORTED_RATES_11B    S    4    2
-V    RO    NP
-NONE
-4     2 4 11 22
-V    RO    NP
-NONE
-4     2 4 11 22
-
-*
-* Supported Rate Set for 11a
-*
-
-WNI_CFG_SUPPORTED_RATES_11A    S    8    7
-V    RO    NP
-NONE
-8    12 18 24 36 48 72 96 108
-V    RO    NP
-NONE
-8    12 18 24 36 48 72 96 108
-
-*
-*The Dot11 mode can change dynamically on STA
-*
-WNI_CFG_DOT11_MODE     I     4     9
-V    RW    NP RESTART
-LIM
-0    11    0
-V    RW    NP RESTART
-LIM
-0    11    0
-
-#ENUM  ALL           0
-#ENUM  11A           1
-#ENUM  11B           2
-#ENUM  11G           3
-#ENUM  11N           4
-#ENUM  11G_ONLY      5
-#ENUM  11N_ONLY      6
-#ENUM  11AC          7
-#ENUM  11AC_ONLY     8
-
-
-
-
-
-
-*
-* Operational Rate Set (goes in beacon, probe rsp and assoc req)
-*
-
-WNI_CFG_OPERATIONAL_RATE_SET    S    12    2
-V    RW    NP RESTART
-NONE
-0
-V    RW    NP RESTART
-NONE
-4     0x82 0x84 11 22
-* 8    0x8c 18 24 36 48 72 96 108
-
-*
-* Extended Operational Rate Set (goes in beacon, assoc req)
-* required for 11g
-*
-
-WNI_CFG_EXTENDED_OPERATIONAL_RATE_SET    S    8    7
-V    RW    NP RESTART
-NONE
-0
-V    RW    NP RESTART
-NONE
-0
-
-*
-* BSSID
-* In IBSS, this can be changed for coalescing, should SME go into IDLE state?
-*
-
-*
-* Listen Interval
-*
-
-WNI_CFG_LISTEN_INTERVAL    I    4    7
-V    RW    NP RESTART
-NONE
-0    65535 1
-V    RO    NP
-NONE
-0    65535 1
-
-*
-* Valid Channel List
-*
-
-WNI_CFG_VALID_CHANNEL_LIST    S    100    8
-V    RW    NP RESTART
-LIM
-55   36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
-V    RW    NP RESTART
-LIM
-55   36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
-
-*
-* For 11a or pure 11g, use 6Mbps(rateindex 11)
-* as the default beaconRateIndex and
-* nonBeaconRateIndex.
-*
-WNI_CFG_DEFAULT_RATE_INDEX_5GHZ    I    4    9
-V    RW    NP
-NONE
-0    11    5
-V    RW    NP
-NONE
-0    11    5
-
-* *********************************************************
-*
-* Rate adaptation type
-*
-
-WNI_CFG_RATE_ADAPTATION_TYPE  I   4   0
-V    RW    NP
-SCH
-0    2     1
-V    RW    NP
-SCH
-0    2     1
-
-#ENUM FIXED 0
-#ENUM AUTO  1
-#ENUM SNR_BASED 2
-
-*
-* Rate adaptation fixed rate
-* Used to determine the rate for all peer stations
-*
-*
-
-WNI_CFG_FIXED_RATE  I   4   0
-V    RW    NP
-HAL
-0    44     0
-V    RW    NP
-HAL
-0    44     0
-
-#ENUM AUTO	                                0
-
-#ENUM 1MBPS                                 1
-#ENUM 2MBPS                                 2
-#ENUM 5_5MBPS                               3
-#ENUM 11MBPS                                4
-
-#ENUM 6MBPS                                 5
-#ENUM 9MBPS                                 6
-#ENUM 12MBPS                                7
-#ENUM 18MBPS                                8
-#ENUM 24MBPS                                9
-#ENUM 36MBPS                                10
-#ENUM 48MBPS                                11
-#ENUM 54MBPS                                12
-
-#ENUM 6_5MBPS_MCS0_20MHZ_SIMO	            13
-#ENUM 13MBPS_MCS1_20MHZ_SIMO                14
-#ENUM 19_5MBPS_MCS2_20MHZ_SIMO              15
-#ENUM 26MBPS_MCS3_20MHZ_SIMO                16
-#ENUM 39MBPS_MCS4_20MHZ_SIMO                17
-#ENUM 52MBPS_MCS5_20MHZ_SIMO                18
-#ENUM 58_5MBPS_MCS6_20MHZ_SIMO              19
-#ENUM 65MBPS_MCS7_20MHZ_SIMO                20
-
-#ENUM 7_2MBPS_MCS0_20MHZ_SIMO_SGI           21
-#ENUM 14_4MBPS_MCS1_20MHZ_SIMO_SGI          22
-#ENUM 21_7MBPS_MCS2_20MHZ_SIMO_SGI          23
-#ENUM 28_9MBPS_MCS3_20MHZ_SIMO_SGI          24
-#ENUM 43_3MBPS_MCS4_20MHZ_SIMO_SGI          25
-#ENUM 57_8MBPS_MCS5_20MHZ_SIMO_SGI          26
-#ENUM 65MBPS_MCS6_20MHZ_SIMO_SGI            27
-#ENUM 72_2MBPS_MCS7_20MHZ_SIMO_SGI          28
-
-#ENUM 0_25MBPS_SLR_20MHZ_SIMO               29
-#ENUM 0_5MBPS_SLR_20MHZ_SIMO                30
-
-#ENUM 68_25MBPS_QC_PROP_20MHZ_SIMO          31
-#ENUM 54MBPS_MCS3_40MHZ_SIMO                32
-#ENUM 81MBPS_MCS4_40MHZ_SIMO                33
-#ENUM 108MBPS_MCS5_40MHZ_SIMO               34
-#ENUM 121_5MBPS_MCS6_40MHZ_SIMO             35
-#ENUM 135MBPS_MCS7_40MHZ_SIMO               36
-#ENUM 15MBPS_MCS0_40MHZ_SIMO_SGI            37
-#ENUM 30MBPS_MCS1_40MHZ_SIMO_SGI            38
-#ENUM 45MBPS_MCS2_40MHZ_SIMO_SGI            39
-#ENUM 60MBPS_MCS3_40MHZ_SIMO_SGI            40
-#ENUM 90MBPS_MCS4_40MHZ_SIMO_SGI            41
-#ENUM 120MBPS_MCS5_40MHZ_SIMO_SGI           42
-#ENUM 135MBPS_MCS6_40MHZ_SIMO_SGI           43
-#ENUM 150MBPS_MCS7_40MHZ_SIMO_SGI           44
-
-* *********************************************************
-*
-* Broadcast/mutlicast rates for 2.4GHZ
-* uses the same rate indices definition as WNI_CFG_FIXED_RATE
-* default value corresponds to 1M
-
-WNI_CFG_FIXED_RATE_MULTICAST_24GHZ    I    4    8
-V    RW    NP
-HAL
-0    31    1
-V    RW    NP
-HAL
-0    31    1
-
-* *********************************************************
-*
-* Broadcast/mutlicast rates for 5 GHZ
-* uses the same rate indices definition as WNI_CFG_FIXED_RATE
-* default value corresponds to 6M
-
-WNI_CFG_FIXED_RATE_MULTICAST_5GHZ    I    4    8
-V    RW    NP
-HAL
-0    31   5
-V    RW    NP
-HAL
-0    31   5
-
-*
-* retry rate selection policy
-* 0 => use the minimum supported rate
-* 1 => use the same rate as the chosen primary rate
-* 2 => use the rate specified in RETRYRATE_SECONDARY
-* 3 => use the rate closest to the primary
-* 4 => autoselect the retry rate based on RA algorithm
-*
-
-WNI_CFG_RETRYRATE_POLICY  I   4   0
-V    RW    NP
-HAL
-0    255     4
-V    RW    NP
-HAL
-0    255     4
-
-#ENUM MIN_SUPPORTED 0
-#ENUM PRIMARY       1
-#ENUM RESERVED      2
-#ENUM CLOSEST       3
-#ENUM AUTOSELECT    4
-#ENUM MAX           5
-
-*
-* the following two CFG's are
-* used only if the retryrate policy == 2
-* These should be set to one of the values used
-* for configuring fixed rates (see enumerated rates)
-*
-
-WNI_CFG_RETRYRATE_SECONDARY  I   4   0
-V    RW    NP
-HAL
-0    255     0
-V    RW    NP
-HAL
-0    255     0
-
-WNI_CFG_RETRYRATE_TERTIARY  I   4   0
-V    RW    NP
-HAL
-0    255     0
-V    RW    NP
-HAL
-0    255     0
-
-* *********************************************************
-*
-* Automatic Power Save Delivery capability
-*
-
-WNI_CFG_APSD_ENABLED I   4   0
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-
-*
-* Shared key authentication supported
-*
-
-WNI_CFG_SHARED_KEY_AUTH_ENABLE    I   4   8
-V    RW    NP
-NONE
-0    1    1
-V    RW    NP
-NONE
-0    1    1
-
-*
-* Open system authentication supported
-*
-
-WNI_CFG_OPEN_SYSTEM_AUTH_ENABLE    I   4   8
-V    RW    NP
-NONE
-0    1    1
-V    RW    NP
-NONE
-0    1    1
-
-*
-* Authentication Type (change requires restart)
-*
-
-WNI_CFG_AUTHENTICATION_TYPE    I    4    8
-V    RW    NP RESTART
-NONE
-0    65535    0
-V    RW    NP RESTART
-NONE
-0    65535    0
-
-*
-* CF Poll Request (change requires restart)
-*
-
-WNI_CFG_CF_POLL_REQUEST    I    4    8
-NV    RW    NP RESTART
-NONE
-0    1    0
-V    RW    NP RESTART
-NONE
-0    1    0
-
-*
-* Privacy Enabled (change requires restart)
-*
-
-WNI_CFG_PRIVACY_ENABLED    I    4    8
-V    RW    NP RESTART
-NONE
-0    1    0
-V    RW    NP RESTART
-NONE
-0    1    0
-
-*
-* Short Preamble (change requires restart)
-*
-
-WNI_CFG_SHORT_PREAMBLE    I    4    8
-V    RW    NP RESTART
-NONE
-0    1    1
-V    RW    NP RESTART
-NONE
-0    1    1
-
-*
-* Short Slot time
-* This is the operational state of the BSS
-
-WNI_CFG_SHORT_SLOT_TIME    I    4    8
-V    RW    NP
-NONE
-0    1    1
-V    RW    NP
-NONE
-0    1    0
-
-
-*
-* ACCEPT Short Slot Association only
-*
-* 1:  If AP supports shortSlot, then AP will accept
-*     association only from stations that supports
-*     supports short slot
-* 0:  AP supports shortSlot, but AP will accept association
-*     from stations regardless of whether station supports
-*     short slot or long slot
-*
-WNI_CFG_ACCEPT_SHORT_SLOT_ASSOC_ONLY    I    4    9
-V    RW    NP    RESTART
-NONE
-0    1    0
-V    RW    NP    RESTART
-NONE
-0    1    0
-
-
-*
-* QOS Enabled (change requires restart)
-*
-
-WNI_CFG_QOS_ENABLED    I    4    8
-V    RW    NP RESTART
-NONE
-0    1    0
-V    RW    NP RESTART
-NONE
-0    1    0
-
-*
-* HCF Enabled (change requires restart)
-*
-
-WNI_CFG_HCF_ENABLED     I    4    8
-V    RW    NP RESTART
-NONE
-0    1    0
-V    RW    NP RESTART
-NONE
-0    1    0
-
-*
-* RSN (11i/WPA) Enabled
-*
-
-WNI_CFG_RSN_ENABLED     I    4    8
-V    RW    NP RESTART
-NONE
-0    1    0
-V    RW    NP RESTART
-NONE
-0    1    0
-
-*
-* Background scanning periodicity (kilo usec)
-*
-
-WNI_CFG_BACKGROUND_SCAN_PERIOD    I    4    8
-V    RW    NP
-LIM
-0    180000    5000
-V    RW    NP
-LIM
-0    18000    5000
-
-*
-* Max number of Preauthentication
-*
-
-*
-* Preauthentication Cleanup Timeout (kilo usec)
-*
-
-WNI_CFG_PREAUTH_CLNUP_TIMEOUT    I    4    8
-NV    XX    NP
-NONE
-0     0     0
-V    RW    NP
-LIM
-0    120000    30000
-
-*
-* Release AID Timeout
-*
-
-WNI_CFG_RELEASE_AID_TIMEOUT    I    4    8
-NV    XX    NP
-NONE
-0    0    0
-V    RW    NP
-LIM
-0    100000    1000
-*
-* Heartbeat Threshold
-*
-
-WNI_CFG_HEART_BEAT_THRESHOLD    I    4    8
-V    RW    NP
-LIM
-0    65535    40
-NV    RW    NP
-NONE
-0    65535    40
-
-*
-* Probe response wait time out after heartbeat failure
-*
-
-WNI_CFG_PROBE_AFTER_HB_FAIL_TIMEOUT    I    4    8
-V    RW    NP
-NONE
-10    10000    40
-V    RW    NP
-NONE
-10    10000    40
-
-*
-* Manufacturer OUI (from eeprom)
-*
-
-WNI_CFG_MANUFACTURER_OUI    S    3    8
-V    RO    NP
-NONE
-3    0x0 0xa 0xf5
-V    RO    NP
-NONE
-3    0x0 0xa 0xf5
-
-WNI_CFG_11D_ENABLED    I    4    9
-V    RW    NP  RESTART
-NONE
-0    1    1
-V    RW    NP  RESTART
-NONE
-0    1    0
-
-*
-* per channel Max power transmit  (in dBm)
-* this parameter correspond to the MAX_COUNTRY_EID
-* table of (Channel Number/num channel/max tx power)
-*
-* There is one table for 5GHz channels and one table for 2.4GHz channels
-*
-
-WNI_CFG_MAX_TX_POWER_2_4    S    128    8
-V    RW    NP
-NONE
-3   1 14 20
-V    RW    NP
-NONE
-3   1 14 20
-
-WNI_CFG_MAX_TX_POWER_5    S    128    8
-V    RW    NP
-NONE
-3 36 126 20
-V    RW    NP
-NONE
-3 36 126 20
-
-*
-* Cell size configurations. These are canned configurations for a specified
-* cell size.
-*
-WNI_CFG_NETWORK_DENSITY    I    4    9
-V    RW    NP
-HAL
-0    3    3
-V    RW    NP
-HAL
-0    3    0
-
-#ENUM LOW      0
-#ENUM MEDIUM   1
-#ENUM HIGH     2
-#ENUM ADAPTIVE 3
-
-
-*
-* Adaptive Threshold Algorithm
-*
-WNI_CFG_ADAPTIVE_THRESHOLD_ALGORITHM    I    4    9
-V    RW    NP
-HAL
-1    2    2
-V    RW    NP
-HAL
-1    2    2
-
-#ENUM CARRIER      1
-#ENUM CORRELATION  2
-
-
-
-*
-* Current TX Antenna
-*
-
-WNI_CFG_CURRENT_TX_ANTENNA    I    4    9
-V    RW    NP
-HAL
-1    1    1
-V    RW    NP
-HAL
-1    2    2
-
-*
-* Current RX Antenna
-*
-
-WNI_CFG_CURRENT_RX_ANTENNA    I    4    9
-V    RW    NP
-HAL
-1    2    2
-V    RW    NP
-HAL
-1    3    3
-
-*
-* Current TX Power Level
-*
-
-WNI_CFG_CURRENT_TX_POWER_LEVEL    I    4    9
-V    RW    NP
-NONE
-0    128    27
-V    RW    NP
-NONE
-0    128    27
-
-*
-* Qualcomm Prop Rates are disabled by default
-*
-WNI_CFG_PROPRIETARY_RATES_ENABLED    I    4    12
-V    RW    NP RESTART
-NONE
-0    1    0
-V    RW    NP RESTART
-NONE
-0    1    0
-
-
-*
-* AP node Name
-*
-
-WNI_CFG_AP_NODE_NAME    S    32    8
-NV    RO    NP
-NONE
-0
-V    RW    NP RESTART
-NONE
-0
-
-*
-* Country code (from EEPROM)
-*
-
-WNI_CFG_COUNTRY_CODE    S    3    8
-V    RW    NP
-NONE
-0
-V    RW    NP
-NONE
-3 0x11 0x22 0x33
-
-*
-* Spectrum Management (11h) enable/disable
-*
-
-WNI_CFG_11H_ENABLED    I    4    12
-V    RW    NP RESTART
-NONE
-0    1    1
-V    RW    NP RESTART
-NONE
-0    1    1
-
-*
-* Proximity, set it for very short distances
-* Proxmity setting is applied via halPhySetNwDensity()
-*
-* close proximity off = densityOn is true. network density config applies.
-* close proximity on = densityOn is false. Don't care about network density config.
-*
-
-WNI_CFG_PROXIMITY    I    4    12
-V   RW    NP
-HAL
-0   1    0
-V   RW    NP
-HAL
-0   1    0
-
-#ENUM OFF      0
-#ENUM ON       1
-
-*
-* OLBC detection timeout
-*
-
-WNI_CFG_OLBC_DETECT_TIMEOUT    I    4    12
-V   RW    NP
-NONE
-1000    30000   10000
-V    RW    NP
-NONE
-1000    30000   10000
-
-**********************************
-* Protection Enable
-*
-*LOWER byte for associated stations
-*UPPER byte for overlapping stations.
-*11g ==> protection from 11g
-*11b ==> protection from 11b
-*each byte will have the following info
-*bit7	  bit6	 bit5   bit4 bit3   bit2  bit1 bit0
-*reserved reserved RIFS Lsig n-GF ht20 11g 11b
-**********************************
-WNI_CFG_PROTECTION_ENABLED    I    4    9
-V    RW    NP  RESTART
-LIM
-0    0xffff    0xffff
-V    RW    NP  RESTART
-LIM
-0    0xffff    0xffff
-
-#ENUM FROM_llA 0
-#ENUM FROM_llB 1
-#ENUM FROM_llG 2
-#ENUM HT_20 3
-#ENUM NON_GF 4
-#ENUM LSIG_TXOP 5
-#ENUM RIFS 6
-#ENUM OBSS 7
-#ENUM OLBC_FROM_llA 8
-#ENUM OLBC_FROM_llB 9
-#ENUM OLBC_FROM_llG 10
-#ENUM OLBC_HT20 11
-#ENUM OLBC_NON_GF 12
-#ENUM OLBC_LSIG_TXOP 13
-#ENUM OLBC_RIFS 14
-#ENUM OLBC_OBSS 15
-
-
-* ****************************************
-*
-* 11G Protection Enable Always
-* Valid only if protection is enabled
-* forces uses of protection regardless of legacy stations
-*
-
-WNI_CFG_11G_PROTECTION_ALWAYS    I    4    9
-V    RW    NP  RESTART
-NONE
-0    1    0
-V    RW    NP  RESTART
-NONE
-0    1    0
-
-*********************************************
-* Force protection
-* 0 :  disable protection
-* 1 :  CTS
-* 2 :  RTS by threshold (threshold nonzero)
-* 3 :  dual CTS (not supported right now)
-* 4 :  RTS (threshold 0)
-* 5 :  auto
-
-WNI_CFG_FORCE_POLICY_PROTECTION    I    4    9
-V    RW    NP  RESTART
-HAL
-0    5    5
-V    RW    NP  RESTART
-HAL
-0    5    5
-
-#ENUM DISABLE                0
-#ENUM CTS                    1
-#ENUM RTS                    2
-#ENUM DUAL_CTS               3
-#ENUM RTS_ALWAYS             4
-#ENUM AUTO                   5
-
-
-
-
-
-
-********************************************
-* 11G Short Preamble Enable
-*
-
-WNI_CFG_11G_SHORT_PREAMBLE_ENABLED    I    4    9
-V    RW    NP  RESTART
-NONE
-0    1    0
-V    RW    NP  RESTART
-NONE
-0    1    0
-
-*
-* 11G Short Slot Time Enable (change requires restart)
-* This is the admin state of short slot support.
-
-WNI_CFG_11G_SHORT_SLOT_TIME_ENABLED    I    4    9
-V    RW    NP  RESTART
-NONE
-0    1    1
-V    RW    NP  RESTART
-NONE
-0    1    1
-
-*
-* Calibration periodicity (minutes)
-*
-
-WNI_CFG_CAL_PERIOD    I    4    12
-V    RW    NP
-HAL
-2    10    5
-V    RW    NP
-HAL
-2    10    5
-
-*
-* Statistics collection periodicity (seconds)
-*
-
-WNI_CFG_STATS_PERIOD    I    4    12
-V    RW    NP
-HAL
-1    10    10
-V    RW    NP
-HAL
-1    10    10
-
-*
-* Calibration on/off control
-*
-
-WNI_CFG_CAL_CONTROL    I    4    12
-V    RW    NP
-HAL
-0    1    0
-V    RW    NP
-HAL
-0    1    0
-
-#ENUM CAL_ON  0
-#ENUM CAL_OFF 1
-
-
-*
-* Parameter to allow 11g only STAs while operating in 11g mode
-*
-
-WNI_CFG_11G_ONLY_POLICY    I    4    12
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-
-*
-* Packet Classification
-* This flag is a bitmask used to indicate which
-* frame classifier to be enabled:
-*    b0: DSCP
-*    b1: 802.1P
-*
-
-WNI_CFG_PACKET_CLASSIFICATION    I    4    12
-V    RW    NP
-HAL
-0    3    0
-V    RW    NP
-HAL
-0    3    0
-
-#ENUM  DISABLED  0
-#ENUM  DSCP      1
-#ENUM  8021P     2
-#ENUM  ALL       3
-
-*
-* WME Enabled (change requires restart)
-*
-
-WNI_CFG_WME_ENABLED    I    4    8
-V    RW    NP RESTART
-NONE
-0    1    1
-V    RW    NP RESTART
-NONE
-0    1    1
-
-*
-* ADDTS response timeout (in ms)
-*
-
-WNI_CFG_ADDTS_RSP_TIMEOUT I    4    8
-V    RW    NP
-NONE
-0    65535    1000
-V    RW    NP
-NONE
-0    65535    1000
-
-
- * Max SP Length indicates the max number of
- * total buffered MSDUs and MMPDUs the WMM AP
- * may deliver to WMM STA during any service period
- * triggered by WMM STA.
- * 1) If AP sends WMM IE with the UAPSD bit 0, max_sp_length=0
- * 2) If WMM STA's all 4 UAPSD flag are set to 0, max_sp_length=0
- * 3) If AP sends WMM IE with UAPSD=1, and at least one of stations
- *    UAPSD flag is set to 1, then max_sp_length can be set to:
- *    [b5:b6]=0x00: WMM AP may deliver all buffered frames
- *    [b5:b6]=0x10: WMM AP may deliver max 2 buffered frames
- *    [b5:b6]=0x01: WMM AP may deliver max 4 buffered frames
- *    [b5:b6]=0x11: WMM AP may deliver max 6 buffered frames
-
-WNI_CFG_MAX_SP_LENGTH   I    4    8
-V    RW    NP
-NONE
-0    3    0
-V    RW    NP
-NONE
-0    3    0
-
-
-*
-* KEEP ALIVE STA Limit Threshold , used in AP to delete the STA
-*       from Station Table which didn't respond to Probe Response Messages
-*
-
-WNI_CFG_KEEP_ALIVE_STA_LIMIT_THRESHOLD I    4    8
-NV    RW    NP
-NONE
-0    32  0
-V    RW    NP
-NONE
-0    32  0
-
-*
-* Parameter that specifies whether to send SSID
-* in Probe Response when SSID is suppressed
-*
-
-WNI_CFG_SEND_SINGLE_SSID_ALWAYS    I    4    12
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-
-*
-* WSM Enabled (change requires restart)
-* Takes effect only if WME is also enabled
-*
-
-WNI_CFG_WSM_ENABLED    I    4    8
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-
-* ****************************************
-*
-
-
-
-* Background Channel List
-*   Contains pairs of {channelNumber, scanType}
-*   where scanType = 0 indicates active scan and
-*                  = 1 indicates passive scan
-*
-*
-*WNI_CFG_BACKGROUND_SCAN_LIST    S    128    8
-*V    RW    NP RESTART
-*LIM
-*60   36 0 40 0 44 0 48 0 52 0 56 0 60 0 64 0 1 0 6 0 11 0 34 0 38 0 42 0 46 0 2 0 3 0 4 0 5 0 7 0 8 0 9 0 10 0 12 0 13 0 14 0 149 0 153 0 157 0 161 0
-*V    RW    NP RESTART
-*LIM
-*60   1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0 12 0 13 0 14 0 34 0 36 0 38 0 40 0 42 0 44 0 46 0 48 0 52 0 56 0 60 0 64 0 149 0 153 0 157 0 161 0
-*
-
-* ****************************************
-* EDCA paramters are contained in profiles - each profile contains
-* the parameters [ACM, AIFSN, CWmin, CWmax, TxOp] for four
-* access categories (i.e., four sets). Two such sets of four parameters
-* make a single profile: One set is used locally by the AP, the other set
-* is broadcast for use by stations.
-*
-* Cwmin and Cwmax are two bytes each, MSB first. So Cwmin of [3 255] is
-* equivalent to 0x3ff, i.e. 3*256+255=1023
-*
-* The profile to use is selected based on the valus of the profile select param
-* See ENUMs below for definitions of profile values
-*
-
-WNI_CFG_EDCA_PROFILE    I   4   8
-V   RW  NP
-SCH
-0   255   1
-V   RW  NP
-SCH
-0   255   1
-
-#ENUM ANI      0
-#ENUM WMM      1
-#ENUM TIT_DEMO 2
-#ENUM MAX      3
-
-#ENUM ACM_IDX    0
-#ENUM AIFSN_IDX  1
-#ENUM CWMINA_IDX 2
-#ENUM CWMAXA_IDX 4
-#ENUM TXOPA_IDX  6
-#ENUM CWMINB_IDX 7
-#ENUM CWMAXB_IDX 9
-#ENUM TXOPB_IDX  11
-#ENUM CWMING_IDX 12
-#ENUM CWMAXG_IDX 14
-#ENUM TXOPG_IDX  16
-
-
-* ****************************************
-* Profile 0 (Airgo) parameters - AC_BK Local
-* ACM, AIFSN, [CWminH, CWminL, CWmaxH, CWmaxL, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACBK_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 31  3 255  0   0 15  3 255  0
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 31  3 255  0   0 15  3 255  0
-
-*
-* Profile 0 (Airgo) parameters AC_BE Local
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACBE_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 15  3 255  100    0 31  3 255  100   0 15  3 255  100
-V   RW  NP RESTART
-NONE
-17   0 2   0 15  3 255  100    0 31  3 255  100   0 15  3 255  100
-
-*
-* Profile 0 (Airgo) parameters AC_VI Local
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACVI_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 7  0 15  200   0 15  0 31  188   0 7  0 15  200
-V   RW  NP RESTART
-NONE
-17   0 2   0 7  0 15  200   0 15  0 31  188   0 7  0 15  200
-
-*
-* Profile 0 (Airgo) parameters AC_VO Local
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACVO_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 3  0 7  100   0 7  0 15  102   0 3  0 7  100
-V   RW  NP RESTART
-NONE
-17   0 2   0 3  0 7  100   0 7  0 15  102   0 3  0 7  100
-
-*
-* Profile 0 (Airgo) parameters - AC_BK Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACBK   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 31  3 255  0   0 15  3 255  0
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 31  3 255  0   0 15  3 255  0
-
-*
-* Profile 0 (Airgo) parameters AC_BE Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACBE   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 15  3 255  100   0 31  3 255  100   0 15  3 255  100
-V   RW  NP RESTART
-NONE
-17   0 2   0 15  3 255  100   0 31  3 255  100   0 15  3 255  100
-
-*
-* Profile 0 (Airgo) parameters AC_VI Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACVI   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 7  0 15  200   0 15  0 31  188   0 7  0 15  200
-V   RW  NP RESTART
-NONE
-17   0 2   0 7  0 15  200   0 15  0 31  188   0 7  0 15  200
-
-*
-* Profile 0 (Airgo) parameters AC_VO Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_ANI_ACVO   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 3  0 7  100   0 7  0 15  102   0 3  0 7  100
-V   RW  NP RESTART
-NONE
-17   0 2   0 3  0 7  100   0 7  0 15  102   0 3  0 7  100
-
-
-* ****************************************
-* Profile 1 (WME) parameters - AC_BK Local
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACBK_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 31  3 255  0   0 15  3 255  0
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 15  3 255  0   0 15  3 255  0
-
-
-*
-* Profile 1 (WME) parameters AC_BE Local
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACBE_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 3   0 15  0 63  0   0 31  3 255  0   0 15  0 63  0
-V   RW  NP RESTART
-NONE
-17   0 3   0 15  0 63  0   0 15  0 63  0   0 15  0 63  0
-
-*
-* Profile 1 (WME) parameters AC_VI Local
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACVI_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 1  0 7  0 15  94  0 7  0 15  188   0 7  0 15  94
-V   RW  NP RESTART
-NONE
-17   0 1  0 7  0 15  94  0 7  0 15  188   0 7  0 15  94
-
-*
-* Profile 1 (WME) parameters AC_VO Local
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACVO_LOCAL   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 1   0 3  0 7  47   0 3  0 7  102   0 3  0 7  47
-V   RW  NP RESTART
-NONE
-17   0 1   0 3  0 7  47   0 3  0 7  102   0 3  0 7  47
-
-*
-* Profile 1 (WME) parameters - AC_BK Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACBK   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 15  3 255  0   0 15  3 255  0
-V   RW  NP RESTART
-NONE
-17   0 7   0 15  3 255  0   0 15  3 255  0   0 15  3 255  0
-
-*
-* Profile 1 (WME) parameters AC_BE Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACBE   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 3   0 15  3 255  0   0 15  3 255  0   0 15  3 255  0
-V   RW  NP RESTART
-NONE
-17   0 3   0 15  3 255  0   0 15  3 255  0   0 15  3 255  0
-
-*
-* Profile 1 (WME) parameters AC_VI Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACVI   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 7  0 15  94   0 7  0 15  188   0 7  0 15  94
-V   RW  NP RESTART
-NONE
-17   0 2   0 7  0 15  94   0 7  0 15  188   0 7  0 15  94
-
-*
-* Profile 1 (WME) parameters AC_VO Broadcast
-* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
-*
-
-WNI_CFG_EDCA_WME_ACVO   S   20  8
-V   RW  NP RESTART
-NONE
-17   0 2   0 3  0 7  47   0 3  0 7  102   0 3  0 7  47
-V   RW  NP RESTART
-NONE
-17   0 2   0 3  0 7  47   0 3  0 7  102   0 3  0 7  47
-
-*
-* Radar detector flag enable/disable
-*
-
-WNI_CFG_RDET_FLAG   I   4   9
-V    RW    NP
-NONE
-0    1    0
-V    RW    NP
-NONE
-0    1    0
-
-#ENUM ENABLE  1
-#ENUM DISABLE 0
-
-WNI_CFG_RADAR_CHANNEL_LIST    S    20    8
-V    RW    NP RESTART
-NONE
-15   52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
-V    RW    NP RESTART
-NONE
-15   52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
-
-*
-* Local Power Constraint (dBm)
-*
-
-WNI_CFG_LOCAL_POWER_CONSTRAINT    I    4    12
-V    RW    NP RESTART
-NONE
-0    255    0
-V    RW    NP RESTART
-NONE
-0    255    0
-
-* *********************************************************
-*
-* Admission Control Policy
-* used for admitting tspec's when either edca or hcca are in use
-*
-
-WNI_CFG_ADMIT_POLICY  I   4   8
-V  RW  NP  RESTART
-NONE
-0  2   0
-V  RW  NP
-SCH
-0  2   0
-
-#ENUM  ADMIT_ALL   0
-#ENUM  REJECT_ALL  1
-#ENUM  BW_FACTOR   2
-
-*
-* Oversubscription factor for admission control
-* valid only when admit policy is set to BW_FACTOR
-* units are in terms of 1/10th of available bandwidth
-*
-
-WNI_CFG_ADMIT_BWFACTOR  I   4   8
-V  RW  NP  RESTART
-NONE
-0  100   20
-V  RW  NP
-SCH
-0  100   20
-
-* *********************************************************
-*
-* Number of "consecutive" Background Scan Failure needed
-* before LIM is forced to perform 1 aggressive background scan
-*
-WNI_CFG_MAX_CONSECUTIVE_BACKGROUND_SCAN_FAILURE    I    4    8
-V    RW    NP  RESTART
-NONE
-0    256    60
-V    RW    NP  RESTART
-NONE
-0    256    60
-
-
-*************************************
-* Feature:   Channel Bonding
-*************************************
-*
-*  Global flag to enable/disable Channel Bonding
-*  0 - Disable:       Force disable channel bonding for all TC-ids
-*  1 - Enable:        Force enable channel bonding for all TC-ids
-*  2 - no legacy bss: Enable channel bonding if no legacy BSS are present
-*  3 - no legacy all: Enable channel bonding if no legacy BSS or devices are present
-*  4 - intelligent:   Enable channel bonding depending on load level on secondary channel
-*
-WNI_CFG_CHANNEL_BONDING_MODE    I    4    12
-V    RW    NP    RESTART
-LIM
-0    10     0
-V    RW    NP    RESTART
-LIM
-0    10     0
-
-#ENUM DISABLE          0
-#ENUM ENABLE           1
-#ENUM IF_NO_LEGACY_BSS 2
-#ENUM IF_NO_LEGACY_ALL 3
-#ENUM INTELLIGENT      4
-
-
-*
-*  When the channel is 40MHz wide, this CFG indicates
-*  if the secondary channel is located above (at
-*  a higher frequency), or located below (at a
-*  lower frequency).
-*
-*  0 - There is no secondary channel. The channel is 20Mhz
-*  1 - LOWER:  Secondary channel 40MHZ is located below the primary channel
-*  2 - CENTERED:Secondary channel and primary located at centered
-*  3 - HIGHER: Secondary channel 40 MHZ is located above the primary channel
-*  4 - 80MHZ_LOW_CENTERED : 20/40MHZ offset LOW 40/80MHZ offset CENTERED
-*  5 - 80MHZ_CENTERED_CENTERED : 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED
-*  6 - 80MHZ_HIGH_CENTERED : 20/40MHZ offset HIGH 40/80MHZ offset CENTERED
-*  7 - 80MHZ_LOW_LOW: 20/40MHZ offset LOW 40/80MHZ offset LOW
-*  8 - 80MHZ_HIGH_LOW: 20/40MHZ offset HIGH 40/80MHZ offset LOW
-*  9 - 80MHZ_LOW_HIGH: 20/40MHZ offset LOW 40/80MHZ offset HIGH
-*  10 - 80MHZ_HIGH_HIGH: 20/40MHZ offset HIGH 40/80MHZ offset HIGH
-*
-WNI_CFG_CB_SECONDARY_CHANNEL_STATE    I    4    12
-V    RW    NP
-NONE
-0    10     0
-V    RW    NP
-NONE
-0    10     0
-
-#ENUM NONE             0
-#ENUM LOWER            1
-#ENUM HIGHER           2
-#ENUM 11AC_20MHZ_LOW_40MHZ_CENTERED       3
-#ENUM 11AC_20MHZ_CENTERED_40MHZ_CENTERED  4
-#ENUM 11AC_20MHZ_HIGH_40MHZ_CENTERED      5
-#ENUM 11AC_20MHZ_LOW_40MHZ_LOW            6
-#ENUM 11AC_20MHZ_HIGH_40MHZ_LOW           7
-#ENUM 11AC_20MHZ_LOW_40MHZ_HIGH           8
-#ENUM 11AC_20MHZ_HIGH_40MHZ_HIGH          9
-
-*
-*  Trigger Station Background Scan Flag
-*
-WNI_CFG_TRIG_STA_BK_SCAN    I    4    12
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    1
-
-* *********************************************************
-* control of dynamic EDCA parameter profile switching
-*
-* OOB, we would like to support WMM standard edca profile
-* However, when Airgo STA's join the BSS, we would like
-* to switch the profile to Airgo high-performance  edca parameters
-*
-* This cfg supports that behaviour. It is used only if 11e qos
-* has been enabled and is ignored otherwise.
-*
-* When set to any value (other than unused), it determines the
-* edca profile to switch to when an Airgo STA joins the BSS.
-*
-* By default, we choose to switch to Airgo profile.
-*
-* NOTE: This parameter applies only to an AP
-*
-
-WNI_CFG_DYNAMIC_PROFILE_SWITCHING    I   4   8
-V   RW  NP  RESTART
-NONE
-0   255   255
-V   RW  NP   RESTART
-NONE
-0   255   1
-
-#ENUM  UNUSED 255
-
-* *********************************************************
-*
-* Scan control list
-*   Contains pairs of {channelNumber, activeScanAllowedFlag}
-*   where scanType = 1 indicates active scan is  allowed, and
-*                  = 0 indicates passive scan is used
-*   If a channel is not on this list, active scan is NOT allowed. So it is
-*   sufficient to inlude only those channels where active scan is allowed
-*   on this list.
-*
-*   The list determines only whether active scan is allowed or not; it does not
-*   determine which type of scan is actually performed.
-*
-
-WNI_CFG_SCAN_CONTROL_LIST    S    128    8
-V    RW    NP RESTART
-LIM
-112   1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 13 1 14 1 34 1 36 1 38 1 40 1 42 1 44 1 46 1 48 1 50 1 52 0 54 0 56 0 58 0 60 0 62 0 64 0 100 0 104 0 108 0 112 0 116 0 120 0 124 0 128 0 132 0 136 0 140 0 149 1 151 1 153 1 155 1 157 1 159 1 161 1 165 1 240 1 242 1 244 1 246 1 248 1 250 1 252 1
-V    RW    NP RESTART
-LIM
-112   1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 13 1 14 1 34 1 36 1 38 1 40 1 42 1 44 1 46 1 48 1 50 1 52 0 54 0 56 0 58 0 60 0 62 0 64 0 100 0 104 0 108 0 112 0 116 0 120 0 124 0 128 0 132 0 136 0 140 0 149 1 151 1 153 1 155 1 157 1 159 1 161 1 165 1 240 1 242 1 244 1 246 1 248 1 250 1 252 1
-
-
-* ****************************************
-*
-* MIMO rates enabled (for rate adaptation, to start)
-*
-
-WNI_CFG_MIMO_ENABLED   I   4   9
-V    RW    NP RELOAD
-NONE
-0    1    1
-V    RW    NP RELOAD
-NIM
-0    1    1
-
-#ENUM ENABLE  1
-#ENUM DISABLE 0
-
-
-
-*
-* BLOCK ACK Enabled (change requires restart)
-*  change default to ON
-*   bit 0	==> delayed BA
-*   bit 1	==> immediate BA
-WNI_CFG_BLOCK_ACK_ENABLED    I    4    8
-V    RW    NP RESTART
-LIM
-0    3    0
-V    RW    NP RESTART
-LIM
-0    3    0
-
-#ENUM DELAYED 0
-#ENUM IMMEDIATE 1
-
-
-*
-*BA Activity check global timer
-*
-WNI_CFG_BA_ACTIVITY_CHECK_TIMEOUT    I    4    7
-V    RW    NP
-HAL
-0    65535    1000
-V    RW    NP
-HAL
-0    65535    1000
-
-
-*
-* Rx STBC support
-*
-WNI_CFG_HT_RX_STBC  I	4   7
-V    RW    NP   RESTART
-LIM
-0	3	1
-V    RW    NP   RESTART
-LIM
-0	3	1
-
-
-*
-* 1. HT capabilities Info: 2 bytes size
-*
-* Supported channel Width is set to 1 (40 Mhz)
-* SM Power Save is disabled.
-* GreenField support is enabled.
-* Short GI for 20 and 40Mhz is enabled.
-* Max AMSDU Size is set to 0(3839 Octets)
-* DSSS-CCK Mode is enabled.
-* LSIG TXOP Protection is disabled
-* Rest of the features are not supported at this moment.
-*
-* fedc ba98 7654 3210
-* 0000 0001 0010 0000
-*
-WNI_CFG_HT_CAP_INFO   I    4    10
-V    RW    NP       RESTART
-LIM
-0    0xffff    0x016c
-V    RW    NP       RESTART
-LIM
-0    0xffff    0x106e
-
-#ENUM ADVANCE_CODING            0
-#ENUM SUPPORTED_CHAN_WIDTH_SET  1
-#ENUM SM_POWER_SAVE             2
-#ENUM GREEN_FIELD               4
-#ENUM SHORT_GI_20MHZ            5
-#ENUM SHORT_GI_40MHZ            6
-#ENUM TX_STBC                   7
-#ENUM RX_STBC                   8
-#ENUM DELAYED_BA               10
-#ENUM MAX_AMSDU_SIZE           11
-#ENUM DSSS_CCK_MODE_40MHZ      12
-#ENUM PSMP                     13
-#ENUM STBC_CONTROL_FRAME       14
-#ENUM LSIG_TXOP_PROTECTION     15
-
-*
-* 2. HT Parameters Info: 1 byte size
-*
-* Max AMPDU Rx Factor is defined using bit #0 and #1
-* MPDU Density is defined using bit #2 thru #4.
-* The default values are,
-* 7654 3210
-* 0000 0010  --> 2 for RX AMPDU Factor, 0 for MPDU density
-*
-WNI_CFG_HT_AMPDU_PARAMS    I   4   7
-V    RW   NP       RESTART
-LIM
-0    0xff    0x00
-V    RW   NP       RESTART
-LIM
-0    0xff    0x02
-
-#ENUM MAX_RX_AMPDU_FACTOR        0
-#ENUM MPDU_DENSITY               2
-#ENUM RESERVED                   5
-
-*
-* 3. Supported MCS Set: 16 bytes size
-*
-* MCS #0-15 and #32 is supported.
-*
-WNI_CFG_SUPPORTED_MCS_SET    S    16    7
-V    RW    P    RESTART
-LIM
-16 255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-V    RW    P    RESTART
-LIM
-16 255 255 0 0 1 0 0 0 0 0 0 0 0 0 0 0
-
-*
-* 4. Extended HT Capabilities Info: 2 bytes size
-*
-* Only HTC Support is enabled, rest all features are not
-* supported at this moment.
-*
-* fedc ba98 7654 3210
-* 0000 0100 0000 0000
-*
-WNI_CFG_EXT_HT_CAP_INFO    I    4    10
-V    RW   P       RESTART
-LIM
-0    0xffff    0x0400
-V    RW   P       RESTART
-LIM
-0    0xffff    0x0400
-
-#ENUM PCO                         0
-#ENUM TRANSITION_TIME      1
-#ENUM RESERVED1                3
-#ENUM MCS_FEEDBACK          8
-#ENUM HTC_SUPPORT            10
-#ENUM RD_RESPONDER           11
-#ENUM RESERVED2                12
-
-
-*
-* 5. Transmit Beam Forming Capabiliries Info: 4 bytes size
-*
-WNI_CFG_TX_BF_CAP    I   4   7
-V    RO   NP      RESTART
-LIM
-0    0xffffffff    0x00000000
-V    RO   NP      RESTART
-LIM
-0    0xffffffff    0x00000000
-
-*
-* 6. Antenna Selection Capabilities: 1 byte size
-*
-WNI_CFG_AS_CAP    I    4    7
-V    RW   P      RESTART
-LIM
-0    0xff    0x00
-V    RW   P      RESTART
-LIM
-0    0xff    0x00
-
-#ENUM ANTENNA_SELECTION            0
-#ENUM EXPLICIT_CSI_FEEDBACK_TX     1
-#ENUM ANTENNA_INDICES_FEEDBACK_TX  2
-#ENUM EXPLICIT_CSI_FEEDBACK        3
-#ENUM ANTENNA_INDICES_FEEDBACK     4
-#ENUM RX_AS                        5
-#ENUM TX_SOUNDING_PPDUS            6
-#ENUM RESERVED                     7
-
-**************************************************
-*  Beacon  HT (High Through) Info IE
-***************************************************
-*
-* 3. HT Info Field1: 1 byte size.
-*
-* Secondary Channel Offset is set to 3 (Down) by default and will
-*                           be updated dynamically by DFS algorithm.
-* Channel Width is set to 1 (40 Mhz)
-* RIFS Mode is enabled
-* Rest of the features are not supported at this moment.
-*
-* 7654 3210
-* 0000 1111
-*
-WNI_CFG_HT_INFO_FIELD1    I    4    10
-V    RW    NP    RESTART
-LIM
-0    0xff    0x0f
-V    RW    NP    RESTART
-LIM
-0    0xff    0x0f
-
-#ENUM SECONDARY_CHANNEL_OFFSET       0
-#ENUM RECOMMENDED_CHANNEL_WIDTH       2
-#ENUM RIFS_MODE                      3
-#ENUM PSMP_ACCESS_ONLY          4
-#ENUM SERVICE_INTERVAL_GRANULARITY   5
-
-*
-* 4.  HT Info Field2: 2 bytes
-*
-* Operation mode is set to 0(Pure, GF) to begin with and
-*                 will be updated dynamically.
-* 'NonGF Devices present is also set to zero and
-*                 will be updated dynamically.
-*
-* fedc ba98 7654 3210
-* 0000 0000 0000 0000
-*
-WNI_CFG_HT_INFO_FIELD2    I    4    10
-V    RW    P
-LIM
-0    0xffff    0x00
-V    RW    P
-LIM
-0    0xffff    0x00
-
-#ENUM OP_MODE                          0
-#ENUM NON_GF_DEVICES_PRESENT  2
-#ENUM RESERVED                         3
-
-*
-* 5. HT Info Field3: 2 bytes
-*
-* fedc ba98 7654 3210
-* 0000 0000 0000 0000
-*
-* LSIG TXOP Full Protection will be zero to begin with and
-* updated dynamically.
-* Everything else is not supported at this moment.
-*
-WNI_CFG_HT_INFO_FIELD3    I    4    10
-V    RW    P
-LIM
-0    0xffff    0x0000
-V    RW    P
-LIM
-0    0xffff    0x0000
-
-#ENUM BASIC_STBC_MCS                      0
-#ENUM DUAL_STBC_PROTECTION                7
-#ENUM SECONDARY_BEACON                    8
-#ENUM LSIG_TXOP_PROTECTION_FULL_SUPPORT   9
-#ENUM PCO_ACTIVE                         10
-#ENUM PCO_PHASE                          11
-#ENUM RESERVED                           12
-
-*
-* 6. Basic MCS Set: 16 bytes size
-*
-* For now set this to zero and don't put any restrictions.
-*
-WNI_CFG_BASIC_MCS_SET    S    16    7
-V    RW    P    RESTART
-LIM
-16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-V    RW    P    RESTART
-LIM
-16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-
-*
-* 7. Current supported MCS Set: 16 bytes size
-*
-* For now set this to zero and don't put any restrictions.
-*
-WNI_CFG_CURRENT_MCS_SET    S    16    7
-V    RW    P    RESTART
-LIM
-16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-V    RW    P    RESTART
-LIM
-16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-
-
-
-*
-* Greenfield Capability
-* By default Greenfield is enabled
-*
-WNI_CFG_GREENFIELD_CAPABILITY  I    4    7
-V    RW    NP    RESTART
-LIM
-0    1    0
-V    RW    NP    RESTART
-LIM
-0    1    0
-
-#ENUM ENABLE    1
-#ENUM DISABLE   0
-
-*
-* Maximum AMPDU Length
-* By default set to zero for 3895 octets
-*
-WNI_CFG_VHT_MAX_MPDU_LENGTH  I    4    19
-V    RW    NP
-LIM
-0    2    0
-V    RW    NP
-LIM
-0    2    0
-
-*
-* Supported Channel Width Set
-* By default set to zero for
-* STAs does not support either 160 or 80+80MHz
-*
-WNI_CFG_VHT_SUPPORTED_CHAN_WIDTH_SET  I    4    19
-V    RW    NP
-LIM
-0    0    0
-V    RW    NP
-LIM
-0    0    0
-
-*
-* LDPC Coding Capability
-* Riva/Pronto supports, default set to 1
-*
-WNI_CFG_VHT_LDPC_CODING_CAP  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* Short GI for 80MHz
-* Riva/Pronto supports, default set to 1
-*
-WNI_CFG_VHT_SHORT_GI_80MHZ  I    4    19
-V    RW    NP
-LIM
-0    1    1
-V    RW    NP
-LIM
-0    1    1
-
-*
-* Short GI for 160MHz and 80+80MHz
-* Riva/Pronto does not supports, default set to 0
-*
-WNI_CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* Support for Transmission of 2x1 STBC
-* Riva/Pronto does not supports, default set to 0
-*
-WNI_CFG_VHT_TXSTBC  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* Support for Reception of PPDUs using STBC
-* Riva/Pronto supports, default set to 1
-*
-WNI_CFG_VHT_RXSTBC  I    4    19
-V    RW    NP
-LIM
-0    1    1
-V    RW    NP
-LIM
-0    1    1
-
-*
-* Support for Operating as SU Beamformer
-* Riva/Pronto does not supports, default set to 0
-*
-WNI_CFG_VHT_SU_BEAMFORMER_CAP  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* Support for Operating as SU Beamformee
-* Riva does not support, But Pronto supports, default set to 0
-*
-WNI_CFG_VHT_SU_BEAMFORMEE_CAP  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* Compressed Steering Number of Beamformer Antennas Supported
-* Riva does not support,Pronto supports, default set to 0
-*
-WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED  I    4    19
-V    RW    NP
-LIM
-0    4    0
-V    RW    NP
-LIM
-0    4    0
-
-*
-* Number of Sounding Dimensions indicates Number
-* of antennas used by the beamformer when sending beamformed transmissions
-* Riva/Pronto does not support beamformer, default set to 0
-*
-WNI_CFG_VHT_NUM_SOUNDING_DIMENSIONS  I    4    19
-V    RW    NP
-LIM
-0    3    0
-V    RW    NP
-LIM
-0    3    0
-
-*
-* MU Beamformer Capable
-* Riva/Pronto does not support, default set to 0
-*
-WNI_CFG_VHT_MU_BEAMFORMER_CAP  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* MU Beamformee Capable
-* Riva does not support but pronto supports, default set to 0
-*
-WNI_CFG_VHT_MU_BEAMFORMEE_CAP  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* VHT TXOP PS
-* Riva does not support but pronto supports, default set to 0
-*
-WNI_CFG_VHT_TXOP_PS  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* +HTC-VHT Capable
-* Riva does not support but pronto supports, default set to 0
-*
-WNI_CFG_VHT_HTC_VHTC_CAP  I    4    19
-V    RW    NP
-LIM
-0    1    0
-V    RW    NP
-LIM
-0    1    0
-
-*
-* Maximum AMPDU Length exponent range 0-7
-* 2^(13+Max AMPDU Length)-1, default set to 0
-*
-WNI_CFG_VHT_AMPDU_LEN_EXPONENT  I    4    19
-V    RW    NP
-LIM
-0    7    3
-V    RW    NP
-LIM
-0    7    3
-
-*
-* VHT Link Adaptation Capable
-* Riva does not support but pronto supports, default set to 0
-*
-WNI_CFG_VHT_LINK_ADAPTATION_CAP  I    4    19
-V    RW    NP
-LIM
-0    3    0
-V    RW    NP
-LIM
-0    3    0
-
-*
-* VHT Rx Antenna Pattern Consistency
-*
-WNI_CFG_VHT_RX_ANT_PATTERN  I    4    19
-V    RW    NP
-LIM
-0    1    1
-V    RW    NP
-LIM
-0    1    1
-
-*
-* VHT Tx Antenna Pattern Consistency
-*
-WNI_CFG_VHT_TX_ANT_PATTERN  I    4    19
-V    RW    NP
-LIM
-0    1    1
-V    RW    NP
-LIM
-0    1    1
-
-*
-* RxMCS Map is 16 bits, The 2bit Max MCS for n SS field.
-* Indicates the maximum MCS that can be received for each
-* number of spacial streams. Riva supports MCS 0-9
-*
-WNI_CFG_VHT_RX_MCS_MAP  I    4    19
-V    RW    NP
-LIM
-0    0xFFFF    0xFFFE
-V    RW    NP
-LIM
-0    0xFFFF    0xFFFE
-
-* TxMCS Map is 16 bits, The 2bit Max MCS for n SS field.
-* Indicates the maximum MCS that can be transmitted for each
-* number of spacial streams.
-*
-WNI_CFG_VHT_TX_MCS_MAP  I    4    19
-V    RW    NP
-LIM
-0    0xFFFF    0xFFFE
-V    RW    NP
-LIM
-0    0xFFFF    0xFFFE
-
-*
-* Rx Highest supported data rate.
-*
-WNI_CFG_VHT_RX_HIGHEST_SUPPORTED_DATA_RATE  I    4    19
-V    RW    NP
-LIM
-0    780   780
-V    RW    NP
-LIM
-0    780   780
-
-*
-* Tx Highest supported data rate.
-*
-WNI_CFG_VHT_TX_HIGHEST_SUPPORTED_DATA_RATE  I    4    19
-V    RW    NP
-LIM
-0    780    780
-V    RW    NP
-LIM
-0    780    780
-
-*
-* Channel center freq Seg1
-*
-WNI_CFG_VHT_CHANNEL_CENTER_FREQ_SEGMENT1  I    4    19
-V    RW    NP
-LIM
-0    256   0
-V    RW    NP
-LIM
-0    256   0
-
-*
-* Channel center freq Seg2 for 80+80 Mhz
-*
-WNI_CFG_VHT_CHANNEL_CENTER_FREQ_SEGMENT2  I    4    19
-V    RW    NP
-LIM
-0    0     0
-V    RW    NP
-LIM
-0    0     0
-
-*
-* Basic MCS Set
-*
-WNI_CFG_VHT_BASIC_MCS_SET  I    4    19
-V    RW    NP
-LIM
-0    0xFFFF    0xFFFE
-V    RW    NP
-LIM
-0    0xFFFF    0xFFFE
-
-*
-* MU-MIMO Capable STA Count
-*
-WNI_CFG_VHT_MU_MIMO_CAP_STA_COUNT  I    4    19
-V    RW    NP
-LIM
-0     4    0
-V    RW    NP
-LIM
-0     4     0
-
-*
-* Spatial Stream Under-Utilization
-*
-WNI_CFG_VHT_SS_UNDER_UTIL  I    4    19
-V    RW    NP
-LIM
-0     0    0
-V    RW    NP
-LIM
-0     0     0
-
-*
-* Forty MHZ Utilization
-*
-WNI_CFG_VHT_40MHZ_UTILIZATION  I    4    19
-V    RW    NP
-LIM
-0     0    0
-V    RW    NP
-LIM
-0     0     0
-
-*
-* Eighty MHz Utilization
-*
-WNI_CFG_VHT_80MHZ_UTILIZATION  I    4    19
-V    RW    NP
-LIM
-0     0    0
-V    RW    NP
-LIM
-0     0     0
-
-*
-* Hundred Sixty MHz Utilization
-*
-WNI_CFG_VHT_160MHZ_UTILIZATION  I    4    19
-V    RW    NP
-LIM
-0     0    0
-V    RW    NP
-LIM
-0     0     0
-
-*
-* Maximum AMSDU length
-* User can set it to either 3839 or 7935 bytes.
-*
-WNI_CFG_MAX_AMSDU_LENGTH    I    4    7
-V    RW    NP    RESTART
-LIM
-0    1    0
-V    RW    NP    RESTART
-LIM
-0    1    0
-
-#ENUM SHORT_3839_BYTES   0
-#ENUM LONG_7935__BYTES   1
-
-
-*
-* Minimum MPDU Start Spacing
-* Determines the minimum time between the start of adjacent MPDUs within an AMPDU.
-* Set to 0 for no restriction
-* Set to 1 for 1/4 s
-* Set to 2 for 1/2 s
-* Set to 3 for 1 s
-* Set to 4 for 2 s
-* Set to 5 for 4 s
-* Set to 6 for 8 s
-* Set to 7 for 16 s
-* default is set to 0
-WNI_CFG_MPDU_DENSITY    I    4    7
-V    RW    NP    RESTART
-LIM
-0    7    0
-V    RW    NP    RESTART
-LIM
-0    7    0
-
-*
-* NUM BUFFERS ADVERTISED
-* Defines number of buffers advertised in ADDBA
-*
-WNI_CFG_NUM_BUFF_ADVERT  I    4    7
-V    RW    NP
-LIM
-0    128    64
-V    RW    NP
-LIM
-0    128    64
-
-*
-* Maximum Rx AMPDU Factor
-* Indicates the maximum length of A-MPDU
-* that the STA can receive.
-* The Maximum Rx A-MPDU defined by this field is equal to  (2 ^ (13 + MAX RX AMPDU FActor))-1  octets.
-* Maximum Rx A-MPDU Factor is an integer in the range 0 to 3.
-* default is set to 2 for 32K max RX side.
-*
-WNI_CFG_MAX_RX_AMPDU_FACTOR    I    4    7
-V    RW    NP    RESTART
-LIM
-0    3    3
-V    RW    NP    RESTART
-LIM
-0    3    3
-
-
-*
-* Short GI support for the reception of 20Mhz packets
-* By default it is enabled
-*
-WNI_CFG_SHORT_GI_20MHZ  I    4    7
-V    RW    NP    RESTART
-LIM
-0    1    1
-V    RW    NP    RESTART
-LIM
-0    1    1
-
-
-#ENUM ENABLE    1
-#ENUM DISABLE   0
-
-
-*
-* Short GI support for the reception of 40Mhz packets
-* By default it is enabled
-*
-WNI_CFG_SHORT_GI_40MHZ  I    4    7
-V    RW    NP    RESTART
-LIM
-0    1    0
-V    RW    NP    RESTART
-LIM
-0    1    1
-
-
-#ENUM ENABLE    1
-#ENUM DISABLE   0
-
-
-*
-* RIFS support on TX Side
-* on RX side it is always supported, it is mandatory
-*
-WNI_CFG_RIFS_ENABLED   I   4   7
-V    RW    NP RESTART
-NONE
-0    1    1
-V    RW    NP RESTART
-NONE
-0    1    1
-
-#ENUM ENABLE  1
-#ENUM DISABLE 0
-
-WNI_CFG_NUM_BEACON_PER_RSSI_AVERAGE    I    4    5
-V    RW    NP
-LIM
-1    20    20
-NV    RW    NP
-LIM
-1    20    20
-
-WNI_CFG_MIN_RSSI_THRESHOLD    I    4    5
-V    RW    NP
-LIM
-0    10    10
-NV    RW    NP
-LIM
-0    10    10
-
-
-WNI_CFG_NTH_BEACON_FILTER    I    4    5
-V    RW    NP
-LIM
-0    255   10
-NV    RW    NP
-LIM
-0    255    10
-
-
-WNI_CFG_BROADCAST_FRAME_FILTER_ENABLE    I    4    5
-V    RW    NP
-LIM
-0    1    0
-NV    RW    NP
-LIM
-0    1    0
-
-
-WNI_CFG_SCAN_IN_POWERSAVE    I    4    5
-V    RW    NP
-LIM
-0    1    1
-V    RW    NP
-LIM
-0    1    1
-
-* *********************************************************
-*
-* WoWLAN Configuration  The following configurations
-* are valid only when magicPktEnable = 1.
-*
-WNI_CFG_WOWLAN_UCAST_PATTERN_FILTER_ENABLE    I    4    5
-V    RW    NP
-NONE
-0     1     1
-NV    RW    NP
-NONE
-0     1     0
-
-
-WNI_CFG_WOWLAN_CHANNEL_SWITCH_ENABLE    I    4    5
-V    RW    NP
-NONE
-0     1     1
-NV    RW    NP
-NONE
-0     1     0
-
-
-WNI_CFG_WOWLAN_DEAUTH_ENABLE    I    4    5
-V    RW    NP
-NONE
-0     1     1
-NV    RW    NP
-NONE
-0     1     0
-
-
-WNI_CFG_WOWLAN_DISASSOC_ENABLE    I    4    5
-V    RW    NP
-NONE
-0     1     1
-NV    RW    NP
-NONE
-0     1     0
-
-
-*
-* BA timeout in TUs, set to 1 minute = approx 58593 TUs
-* 16 bit wide
-*
-WNI_CFG_BA_TIMEOUT  I    4    7
-V    RW    NP   RESTART
-HAL
-0    0xffff    0
-V    RW    NP
-HAL
-0    0xffff    0
-
-
-*
-* This threshold is registered with a traffic monitoring interface (probably HAL),
-* on a per-STA, per-TID basis. Once this threshold has been reached,
-* HAL will indicate to PE that the threshold has been reached for that TID.
-* PE is then free to negotiate a BA session for that peer
-* defaults to 128
-* 16 bit wide
-*
-WNI_CFG_BA_THRESHOLD_HIGH     I    4    7
-V    RW    NP   RESTART
-HAL
-0    0xffff    0x80
-V    RW    NP
-HAL
-0    0xffff    0x80
-
-
-*
-* MAX BA Buffers to be allocated.
-* This count is system wide.
-* 16 bit wide
-*
-WNI_CFG_MAX_BA_BUFFERS     I    4    7
-V    RW    NP   RESTART
-HAL
-0    2560    2560
-V    RW    NP
-HAL
-0    2560    2560
-
-
-*
-* MAX BA Sessions.
-* This count is system wide.
-* 16 bit wide
-*
-WNI_CFG_MAX_BA_SESSIONS     I    4    7
-V    RW    NP   RESTART
-HAL
-0    64    40
-V    RW    NP
-HAL
-0    64    40
-
-
-*
-* BA setup based on Traffic
-*
-WNI_CFG_BA_AUTO_SETUP     I    4    7
-V    RW    NP   RESTART
-HAL
-0    1    1
-V    RW    NP  RESTART
-HAL
-0    1    1
-
-#ENUM ENABLE  1
-#ENUM DISABLE 0
-
-*
-* Decline an ADDBA Request
-*
-WNI_CFG_ADDBA_REQ_DECLINE     I    4    7
-V    RW    NP   RESTART
-LIM
-0    0xff    0
-V    RW    NP  RESTART
-LIM
-0    0xff    0
-
-*
-* Valid Channel List
-*
-
-WNI_CFG_BG_SCAN_CHANNEL_LIST    S    100    8
-V    RW    NP
-LIM
-55   36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
-V    RW    NP
-LIM
-55   36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
-
-*
-* Maximum number of MPDUs in single A-MPDU.
-*
-WNI_CFG_MAX_MPDUS_IN_AMPDU    I    4    8
-V    RW    NP
-HAL
-0    65535    64
-V    RW    NP
-HAL
-0    65535    64
-
-
-*
-* Auto BSSID - When set, BSSID is generated automatically in IBSS, else BSSID in cfg will be used.
-*
-
-WNI_CFG_IBSS_AUTO_BSSID      I    4   0
-V    RW    NP
-NONE
-0    1     1
-NV   RW    NP
-NONE
-0    1     1
-
-*
-* Include Additional IEs in probe request.
-*
-WNI_CFG_PROBE_REQ_ADDNIE_FLAG    I    4    0
-V    RW    NP
-NONE
-0 1 0
-V    RW    NP
-NONE
-0 1 0
-
-*
-* Include Additional IE in probe request.
-*
-WNI_CFG_PROBE_REQ_ADDNIE_DATA    S     255    0
-V    RW    NP
-NONE
-0 0
-V    RW    NP
-NONE
-0 0
-
-*
-* Include Additional IEs in probe response.
-*
-WNI_CFG_PROBE_RSP_ADDNIE_FLAG    I    4    0
-V    RW    NP
-NONE
-0 1 0
-V    RW    NP
-NONE
-0 1 0
-
-*
-* Include Additional IE in probe response.
-*
-WNI_CFG_PROBE_RSP_ADDNIE_DATA1    S     255    0
-V    RW    NP
-NONE
-0 0
-V    RW    NP
-NONE
-0 0
-
-*
-* Include Additional IE in probe response.
-*
-WNI_CFG_PROBE_RSP_ADDNIE_DATA2    S     255    0
-V    RW    NP
-NONE
-0 0
-V    RW    NP
-NONE
-0 0
-
-*
-* Include Additional IE in probe response.
-*
-WNI_CFG_PROBE_RSP_ADDNIE_DATA3    S     255    0
-V    RW    NP
-NONE
-0 0
-V    RW    NP
-NONE
-0 0
-
-*
-* Include Additional IEs in assoc response.
-*
-WNI_CFG_ASSOC_RSP_ADDNIE_FLAG    I    4    0
-V    RW    NP
-NONE
-0 1 0
-V    RW    NP
-NONE
-0 1 0
-
-*
-* Include Additional IE in assoc response.
-*
-WNI_CFG_ASSOC_RSP_ADDNIE_DATA    S     255    0
-V    RW    NP
-NONE
-0 0
-V    RW    NP
-NONE
-0 0
-
-*
-* Include Additional P2P IEs in probe request.
-*
-WNI_CFG_PROBE_REQ_ADDNP2PIE_FLAG    I    4    0
-V    RW    NP
-NONE
-0 1 0
-V    RW    NP
-NONE
-0 1 0
-
-*
-* Include Additional P2P IE in probe request.
-*
-WNI_CFG_PROBE_REQ_ADDNP2PIE_DATA    S     255    0
-V    RW    NP
-NONE
-0 0
-V    RW    NP
-NONE
-0 0
-
-*
-* Include Additional IEs in probe response/beacon.
-*
-WNI_CFG_PROBE_RSP_BCN_ADDNIE_DATA    S    255    0
-V    RW    NP
-LIM
-0 0
-V    RW    NP
-LIM
-0 0
-
-
-*
-* wpsApEnable and wpsStaEnable is specified in here
-* wpsApEnable is bit #0 and wpsStaEnable is bit #1
-*
-WNI_CFG_WPS_ENABLE  I   4   7
-V    RW     NP
-LIM
-0    0xff    0
-V    RW     NP
-LIM
-0    0xff    0
-
-#ENUM AP         1
-#ENUM STA        2
-
-WNI_CFG_WPS_STATE  I   4   7
-V    RW     NP
-LIM
-0    0xff   1
-V    RW     NP
-LIM
-0    0xff   1
-
-*
-* TRUE => include this information in Probe Requests, FALSE => omit it
-*
-
-WNI_CFG_WPS_PROBE_REQ_FLAG    I    4    7
-V    RW    NP
-LIM
-0 1 0
-V    RW    NP
-LIM
-0 1 0
-
-*
-* Wi-Fi Protected Setup Version
-*
-* This  one-byte field is broken into a four-bit major
-* part using the top MSBs and four-bit  minor part
-* using the LSBs. As an example, version 3.2 would be 0x32.
-*
-
-WNI_CFG_WPS_VERSION  I   4   7
-V    RW     NP
-LIM
-0    0xff   0x10
-V    RW     NP
-LIM
-0    0xff   0x10
-
-*
-* Wi-Fi Protected Setup Request type
-* 0x00: Enrollee, Info only
-* 0x01: Enrollee, open 802.1X
-* 0x02: Registrar
-* 0x03: WLAN Manager Registrar
-
-WNI_CFG_WPS_REQUEST_TYPE  I   4   7
-V    RW     NP
-LIM
-0    0xff   0x00
-V    RW     NP
-LIM
-0    0xff   0x03
-
-* Configuration Method(s)
-*
-* The Config Methods Data component lists the configuration methods
-* the Enrollee or Registrar supports.  The list is a bitwise OR of
-* values from the table below. In addition to Config Methods, APs and
-* STAs that support the UPnP Management Interface must support the
-* Permitted Config Methods attribute, which is used to control the
-* Config Methods that are enabled on that AP.
-*
-* Value   Hardware Interface
-* 0x0001  USBA (Flash Drive)
-* 0x0002  Ethernet
-* 0x0004  Label
-* 0x0008  Display
-* 0x0010  External NFC Token
-* 0x0020  Integrated NFC Token
-* 0x0040  NFC Interface
-* 0x0080  PushButton
-* 0x0100  Keypad
-*
-* The bottom 16 bits contain the configuration method(s) when acting
-* as an Enrollee, and the top 16 when acting as a Registrar.
-*
-* QNE-TODO: Merge this with the inappropriately named
-* 'WNI_CFG_WSC_AP_CFG_METHOD'-- this one can serve both puposes.
-*
-
-WNI_CFG_WPS_CFG_METHOD  I   4   7
-V    RW    NP
-LIM
-0    0xFFFFFFFF   0x00000008
-V    RW    NP
-LIM
-0    0xFFFFFFFF   0x018c018e
-
-* UUID
-* The universally unique identifier (UUID) element is a unique
-* GUID generated by the Enrollee or Registrar. It uniquely identifies
-* an operational device and should survive reboots and resets.  The
-* UUID is provided in binary format. If the device also supports UPnP,
-* then the UUID corresponds to the UPnP UUID.
-*
-* QNE-TODO: Re-name their cfg from 'WNI_CFG_UUID'
-
-WNI_CFG_WPS_UUID    S    16    8
-V    RW    NP
-LIM
-6    0xa 0xb 0xc 0xd 0xe 0xf
-V    RW    NP
-LIM
-6    0xa 0xb 0xc 0xd 0xe 0xf
-
-************************************************************************
-* The following cfgs contains the primary type of the device. Its format
-* follows:
-*
-*  0 1 2 3
-*  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-*  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-*  | Attribute ID                   | Length                       |
-*  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-*  | Category ID                    | OUI (1-2)                    |
-*  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-*  | OUI (3-4)                      | Sub Category ID              |
-*  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-*
-* Vendor-specific sub-categories  are designated by  setting the OUI  to the
-* value associated with  that vendor.  Note that a  four-byte subdivided OUI
-* is used. For the predefined values, the  Wi-Fi Alliance OUI of 00 50 F2 04
-* is used.  The predefined values  for Category ID  and Sub Category  ID are
-* provided in the next table. There  is no way to indicate a vendor-specific
-* main device  category. The OUI applies  only to the  interpretation of the
-* Sub Category. If  a vendor does not use sub categories  for their OUI, the
-* three-byte OUI  occupies the first  three bytes of  the OUI field  and the
-* fourth byte is set to zero.
-*
-*  Category              ID Value  Sub Category             ID Value
-*  Computer              1         PC                       1
-*                                  Server                   2
-*                                  Media Center             3
-*  Input Device          2
-*  Printers, Scanners,             Printer                  1
-*  Faxes and Copiers     3         Scanner                  2
-*  Camera                4         Digital Still Camera     1
-*  Storage               5         NAS                      1
-*  Network                         AP                       1
-*  Infrastructure        6         Router                   2
-*                                  Switch                   3
-*  Displays              7         Television               1
-*                                  Electronic Picture Frame 2
-*                                  Projector                3
-*  Multimedia Devices    8         DAR                      1
-*                                  PVR                      2
-*                                  MCX                      3
-*  Gaming Devices        9         Xbox                     1
-*                                  Xbox360                  2
-*                                  Playstation              3
-*  Telephone             10        Windows Mobile           1
-*
-************************************************************************
-
-* QNE-TODO: Rename their cfg from 'WNI_CFG_PRIM_DEVICE_CATEGORY'
-WNI_CFG_WPS_PRIMARY_DEVICE_CATEGORY  I   4   7
-V    RW     NP
-LIM
-0    0xffff   1
-V    RW     NP
-LIM
-0    0xffff   6
-
-* QNE-TODO: Rename their cfg from 'WNI_CFG_PRIM_DEVICE_OUI'
-WNI_CFG_WPS_PIMARY_DEVICE_OUI  I   4   7
-V    RW     NP
-LIM
-0    0xffffffff   0x0050f204
-V    RW     NP
-LIM
-0    0xffffffff   0x0050f204
-
-* QNE-TODO: Rename their cfg from 'WNI_CFG_PRIM_DEVICE_SUB_CATEGORY'
-WNI_CFG_WPS_DEVICE_SUB_CATEGORY  I   4   7
-V    RW     NP
-LIM
-0    0xffff   1
-V    RW     NP
-LIM
-0    0xffff   1
-
-* Association State
-*
-
-* The Association State component shows the configuration and previous
-* association state of the wireless station when sending a Discovery
-* request.
-*
-* Association State    Description
-* 0                    Not Associated
-* 1                    Connection Success
-* 2                    Configuration Failure
-* 3                    Association Failure
-* 4                    IP Failure
-
-WNI_CFG_WPS_ASSOCIATION_STATE  I   4   7
-V    RW     NP
-LIM
-0    0xffff   0
-V    RW     NP
-LIM
-0    0xffff   0
-
-* Configuration Error
-*
-* The  Configuration  Error  component   shows  the  result  of  the  device
-* attempting to configure itself and to associate with the WLAN.
-*
-*  Configuration Error  Description
-*   0                   No Error
-*   1                   OOB Interface Read Error
-*   2                   Decryption CRC Failure
-*   3                   2.4 channel not supported
-*   4                   5.0 channel not supported
-*   5                   Signal too weak
-*   6                   Network auth failure
-*   7                   Network association failure
-*   8                   No DHCP response
-*   9                   Failed DHCP config
-*  10                   IP address conflict
-*  11                   Couldnt connect to Registrar
-*  12                   Multiple PBC sessions detected
-*  13                   Rogue activity suspected
-*  14                   Device busy
-*  15                   Setup locked
-*  16                   Message Timeout
-*  17                   Registration Session Timeout
-*  18                   Device Password Auth Failure
-*
-* The Device busy error is returned if the sending device is unable to
-* respond to the request due to some internal conflict or resource
-* contention issue. For example, if a device is only capable of
-* performing a single instance of the Registration Protocol at a time,
-* it may return this error in response to attempts to start another
-* instance in the middle of an active session.
-
-WNI_CFG_WPS_CONFIGURATION_ERROR  I   4   7
-V    RW     NP
-LIM
-0    0xffff   0
-V    RW     NP
-LIM
-0    0xffff   0
-
-* Device Password ID
-*
-
-* This  attribute is  used  to identify  a  device password.  There are  six
-* predefined values  and ten reserved values.  If the Device  Password ID is
-* Default,  the Enrollee  should use  its PIN  password (from  the  label or
-* display).  This  password may  correspond  to  the  label, display,  or  a
-* user-defined  password that has  been configured  to replace  the original
-* device password.
-*
-* User-specified indicates that the user  has overridden the password with a
-* manually  selected value.  Machine-specified  indicates that  the original
-* PIN  password has  been overridden  by a  strong,  machinegenerated device
-* password  value.  The Rekey  value  indicates  that  the device's  256-bit
-* rekeying password  will be used.  The PushButton value indicates  that the
-* PIN  is  the all-zero  value  reserved  for  the PushButton  Configuration
-* method.
-*
-* The Registrar-specified value indicates a  PIN that has been obtained from
-* the Registrar (via a display  or other out-of-band method). This value may
-* be further  augmented with the  optional 'Identity' attribute in  M1. This
-* augmentation is useful when multiple predefined UserID/PIN pairs have been
-* established  by a  Registrar such  as  an authenticator  used for  Hotspot
-* access. If the  Device Password ID in  M1 is not one of  the predefined or
-* reserved values, it corresponds to a password given to the Registrar as an
-* OOB Device Password.
-*
-*  Value            Description
-*  0x0000           Default (PIN)
-*  0x0001           User-specified
-*  0x0002           Machine-specified
-*  0x0003           Rekey
-*  0x0004           PushButton
-*  0x0005           Registrar-specified
-*  0x0006 - 0x000F  Reserved'
-*
-
-WNI_CFG_WPS_DEVICE_PASSWORD_ID  I   4   7
-V    RW     NP
-LIM
-0    0xffffffff   0
-V    RW     NP
-LIM
-0    0xffffffff   0
-
-*
-* WPS Association
-*
-* Wi-Fi Protected Setup requires  a prospective enrollee to associate to
-* an AP  in the  network in which  the STA  would like to  enroll.  Once
-* associated,  the enrollment  takes  place over  an EAPOL  conversation
-* (there's  actually  a  new   EAP  method:  EAP-WSC).   The  STA  would
-* presumably  send an EAPOL-Start  over his  new link,  to which  the AP
-* would respond with  an EAP Identity Request.  When  the STA sends back
-* "WSC-Enrollee-1" as his EAP Identity, the AP knows that he's got a WPS
-* supplicant on his hands, and proceeds to talk EAP-WSC.
-*
-* Toward the end of the  specification's development, a problem came up.
-* Microsoft's EAP supplicant  on XP SP1 & SP2  will send an EAPOL-Start,
-* no matter  what.  Even  if the  AP is beaconing  WPA-PSK, say,  the MS
-* supplicant will send  an EAPOL-Start.  If it receives  an EAP Identity
-* Request  in return,  it decides  that the  AP is  really  using 802.1x
-* authentication, and proceeds on that assumption.
-*
-* Now, imagine an AP that is configured for WPA-PSK, and is WPS-capable.
-* It receives  an association  request from some  STA, and then  sees an
-* EAPOL-Start from the newly joined STA.  It naturally sends back an EAP
-* Identity Request  to see  if the  new STA wants  to talk  EAP-WSC.  On
-* Windows XP SP1 & SP2, the  supplicant will take that to mean that this
-* AP is using 802.1x authentication, and will never let the user provide
-* the PSK. Consequently,  WZC will never be able  to associate with this
-* AP.
-*
-* Naturally,  Microsoft's  solution was  to  have  the  world change  to
-* accommodate them.  After a lot of back & forth, the WFA decided on the
-* following change to the WPS spec: when associating for purposes of WPS
-* enrollment, "A  client that intends to  use the EAP-WSC  method with a
-* WSC  enabled AP may  include a  WSC IE  in its  802.11 (re)association
-* request. If a WSC IE is present in the (re)association request, the AP
-* shall engage  in EAP-WSC with the  station and must  not attempt other
-* security handshake.  If the client  does not include  a WSC IE  in its
-* 802.11 (re)association request, it must send its 802.11 Authentication
-* frame  with  Authentication set  to  open  and  an 802.11  Association
-* Request frame without  an RSN IE or SSN IE,  regardless of the network
-* type that is  hosted by the AP. On  successful association, the client
-* will   then   send  an   EAPOL-Start   to   the   AP  and   wait   for
-* EAP-Request/Identity.  When  the   client  receives  an  EAP  Request/
-* Identity,   it  will  respond   with  EAP-Response/Identity   and  the
-* appropriate WSC string to indicate  if it is an Enrollee or Registrar.
-* '
-*
-* This configuration variable contains a bitvector:
-*
-* 0x0001 Incldue the WPS Information Element in Assoc Request frames
-* 0x0002 Elide the the WPA and RSN Information Elements from the
-*        Assoc Request frame
-*
-
-WNI_CFG_WPS_ASSOC_METHOD    I    4    7
-V    RW    NP
-LIM
-0 0xffff 0
-V    RW    NP
-LIM
-0 0xffff 0
-
-*
-* Listen Mode Enable/Disable
-*
-
-WNI_CFG_ENABLE_PHY_AGC_LISTEN_MODE    I    4    7
-V    RW    NP
-HAL
-0    128    128
-V    RW    NP
-HAL
-0    128    128
-
-*
-* On chip reodering polling threshold
-*
-
-WNI_CFG_RPE_POLLING_THRESHOLD    I    4    2
-V    RW    NP
-HAL
-0    65535    10
-V    RW    NP
-HAL
-0    65535    10
-
-*
-* On chip reodering aging threshold for AC0
-*
-
-WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC0_REG    I    4    2
-V    RW    NP
-HAL
-0    65535    30
-V    RW    NP
-HAL
-0    65535    30
-
-*
-* On chip reodering aging threshold for AC1
-*
-
-WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC1_REG    I    4    2
-V    RW    NP
-HAL
-0    65535    30
-V    RW    NP
-HAL
-0    65535    30
-
-*
-* On chip reodering aging threshold for AC2
-*
-
-WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC2_REG    I    4    2
-V    RW    NP
-HAL
-0    65535    30
-V    RW    NP
-HAL
-0    65535    30
-
-*
-* On chip reodering aging threshold for AC3
-*
-
-WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC3_REG    I    4    2
-V    RW    NP
-HAL
-0    65535    30
-V    RW    NP
-HAL
-0    65535    30
-
-*
-* Number of On-Chip reorder sessions
-*
-
-WNI_CFG_NO_OF_ONCHIP_REORDER_SESSIONS    I    4    2
-V    RW    NP
-HAL
-0    2    1
-V    RW    NP
-HAL
-0    2    1
-
-
-*
-* Single RC for all TID
-*
-
-WNI_CFG_SINGLE_TID_RC    I    4    7
-V    RW    NP
-NONE
-0    1    1
-V    RW    NP
-NONE
-0    1    1
-
-*
-* RRM Enabled
-*
-
-WNI_CFG_RRM_ENABLED    I    4    8
-V    RW    NP
-NONE
-0    1    0
-V    RW    NP
-NONE
-0    1    0
-
-*
-* RRM measurement max duration. Section 11.10.3 802.11k-2008.
-* Max Duration represented as maxDuration inTUs = 2^(*WNI_CFG_RRM_IN_CHAN_MAX - 4) * bcnIntvl
-* Operating channel max measurement duration.
-*
-
-WNI_CFG_RRM_OPERATING_CHAN_MAX    I    4    8
-V    RW    NP
-NONE
-0    8    0
-V    RW    NP
-NONE
-0    8    0
-
-*
-* Non-Operating channel max measurement duration.
-*
-
-WNI_CFG_RRM_NON_OPERATING_CHAN_MAX    I    4    8
-V    RW    NP
-NONE
-0    8    0
-V    RW    NP
-NONE
-0    8    0
-
-*
-* TX power control feature
-*
-
-WNI_CFG_TX_PWR_CTRL_ENABLE    I   4   8
-V    RW    NP
-NONE
-0    1    1
-V    RW    NP
-NONE
-0    1    1
-
-*
-*  BTC DHCP No of Bt slots to block
-*
-WNI_CFG_BTC_DHCP_BT_SLOTS_TO_BLOCK    I    4    7
-V    RW    NP
-HAL
-0    0xFF     0
-V    RW    NP
-HAL
-0    0xFF     0
-
-*
-*  Config parameter to Enable/Disable Telescopic Bcn Wakeups
-*  0: Disable, 1: Enable
-*
-
-WNI_CFG_TELE_BCN_WAKEUP_EN    I    4    7
-V    RW    NP
-HAL
-0    1    0
-V    RW    NP
-HAL
-0    1    0
-
-*
-*  Config parameter for Max LI
-*  0: Disable, x: Max LI
-*
-
-WNI_CFG_TELE_BCN_MAX_LI    I    4    7
-V    RW    NP
-HAL
-0    7    5
-V    RW    NP
-HAL
-0    7    5
-
-*
-*  BTC DHCP No of Bt sub interval during DHCP
-*
-WNI_CFG_BTC_A2DP_DHCP_BT_SUB_INTERVALS    I    4    7
-V    RW    NP
-HAL
-0    0xFF     7
-V    RW    NP
-HAL
-0    0xFF     7
-
-*
-
-* Limit on number of associated stations
-* (applies to peer stations in IBSS, SoftAP, BT-AMP AP, & P2P-GO modes)
-*
-
-WNI_CFG_ASSOC_STA_LIMIT    I   4   8
-V    RW    NP
-LIM
-1    32    10
-V    RW    NP
-LIM
-1    32    10
-
-*
-*  SAP channel select start channel number
-*
-WNI_CFG_SAP_CHANNEL_SELECT_START_CHANNEL    I    4    7
-V    RW    NP
-NONE
-1    0xFC  1
-V    RW    NP
-NONE
-1    0xFC  1
-
-*
-*  SAP channel select end channel number
-*
-WNI_CFG_SAP_CHANNEL_SELECT_END_CHANNEL    I    4    7
-V    RW    NP
-NONE
-1    0xFC  11
-V    RW    NP
-NONE
-1    0xFC  11
-
-*
-*  SAP channel select operating band
-*  0- 2.4GHZ / 1- Low 5GHZ /2-MID /3-HIGH/4-Japan4.9GHZ
-*
-WNI_CFG_SAP_CHANNEL_SELECT_OPERATING_BAND     I    4    7
-V    RW    NP
-NONE
-0    0x5     0
-V    RW    NP
-NONE
-0    0x5     0
-
-*
-* Close loop power control will be enabled if value is set to 1
-*
-*
-*
-WNI_CFG_ENABLE_CLOSE_LOOP  I   4   0
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-
-*
-* LTE Coexistence will be enabled if value is set to 1
-*
-*
-*
-WNI_CFG_ENABLE_LTE_COEX  I   4   0
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-
-*
-* AP Keep Alive Timeout (TU)
-*
-WNI_CFG_AP_KEEP_ALIVE_TIMEOUT    I    4    7
-V    RW    NP
-HAL
-1    65535    20
-V    RW    NP
-HAL
-1    65535    20
-
-*
-* UC Filter will be enabled if value is set to 1
-*
-*
-*
-WNI_CFG_ENABLE_UC_FILTER  I   4   0
-V    RW    NP
-HAL
-0    1     0
-V    RW    NP
-HAL
-0    1     0
-
-*
-* MCC Adaptive Scheduler will be enabled if value is set to 1
-*
-*
-*
-WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED  I   4   0
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-*
-*Disable LDPC in STA mode when AP is TXBF capable
-*
-*
-*
-WNI_CFG_DISABLE_LDPC_WITH_TXBF_AP  I   4   0
-V    RW    NP
-NONE
-0    1     0
-V    RW    NP
-NONE
-0    1     0
-
-*
-* AP Link Monitor Timeout (TU)
-*
-WNI_CFG_AP_LINK_MONITOR_TIMEOUT    I    4    7
-V    RW    NP
-HAL
-1    255    3
-V    RW    NP
-HAL
-1    255    3
-
-*
-* PMF SA Query Maximum Retries
-*
-
-WNI_CFG_PMF_SA_QUERY_MAX_RETRIES    I    4    1
-V    RW   NP RESTART
-NONE
-0    20   5
-V    RW   NP RESTART
-NONE
-0    20   5
-
-*
-* PMF SA Query Retry Interval (in TUs)
-*
-
-WNI_CFG_PMF_SA_QUERY_RETRY_INTERVAL    I    4    1
-V    RW   NP RESTART
-NONE
-10    2000 200
-V    RW   NP RESTART
-NONE
-10    2000 200
-
-*
-* FlexConnect Power Factor
-* Default is set to 0 (disable)
-*
-*
-WNI_CFG_FLEX_CONNECT_POWER_FACTOR  I   4   0
-V    RW    NP
-NONE
-0    9     0
-V    RW    NP
-NONE
-0    9     0
-
-* RMC action period frequency (milli seconds)
-*
-WNI_CFG_RMC_ACTION_PERIOD_FREQUENCY    I    4    7
-V    RW    NP
-HAL
-100   1000    300
-V    RW    NP
-HAL
-100   1000    300
-*
-*
-
-* RTT3 Bit Value
-*
-WNI_CFG_RTT3_ENABLE    I    1    1
-V    RW    NP
-NONE
-0    1    1
-V    RW    NP
-NONE
-0    1    1
-
-WNI_CFG_IBSS_ATIM_WIN_SIZE I    4    7
-V    RW    NP
-NONE
-0   100    0
-V    RW    NP
-NONE
-0   100    0
-
-*
-* DFS Master capability (11h) enable/disable
-*
-
-WNI_CFG_DFS_MASTER_ENABLED    I    4    7
-V    RW    NP
-NONE
-0    1    0
-V    RW    NP
-NONE
-0    1    0
-
-WNI_CFG_VHT_ENABLE_TXBF_20MHZ    I    4    7
-V    RW    NP
-NONE
-0    1    0
-V    RW    NP
-NONE
-0    1    0