qcacld-3.0: Add ini to configure 4K QAM MCS rates

Add ini he_mcs_12_13_support which will be used to enable
or disable 4K QAM MCS rates.
This ini can be used to set. MCS 12 and 13 for 2.4Ghz and
5Ghz. First 16 bits(0-15) is for 2.4ghz and next 16 bits
is for 5Ghz. Of 16 bits the higher, first 8 bits represent
BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
represent BW greater than 80Mhz (> 80Mhz). nth bit in octet
represents support for nth NSS [n=1:8].
Def value is 0xFFFFFFFF which enable MCS 12 and 13 for all
NSS and BW.
Also, enable 4K QAM MCS only when this ini is enabled and
firmware also supports it.

Change-Id: I8375203735d8b07ef4ff86be2213da127be4e556
CRs-Fixed: 2762230

components/mlme/dispatcher/inc/cfg_mlme_he_caps.h

@@ -696,7 +696,57 @@
 				CFG_VALUE_OR_DEFAULT, \
 				"He Mu Bfee Sts Gt80")
 
- #define CFG_HE_CAPS_ALL \
+/*
+ * <ini>
+ * he_mcs_12_13_support - Bit mask to enable MCS 12 and 13 support
+ * @Min: 0x0
+ * @Max: 0xffffffff
+ * @Default: 0xffffffff
+ *
+ * This ini is used to set MCS 12 and 13 for 2.4Ghz and 5Ghz. first 16
+ * bits(0-15) is for 2.4ghz and next 16 bits is for 5Ghz. Of 16 bits the lower
+ * 8 bits represent BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
+ * represent BW greater than 80Mhz (> 80Mhz). nth bit in octet represent support
+ * for nth NSS [n=1:8]. Def value is 0xFFFFFFFF which enable MCS 12 and 13 for
+ * all NSS and BW.
+ *
+ * Bits         Band
+ * BIT[0:15]    2.4Ghz support for MCS 12 and 13, for NSS n[1:8] and BW <= 80Mhz
+ *              first 8 bits should be used (0-7) and for NSS n[1:8] and BW >
+ *              80 Mhz, next 8 bits (8-15) should be used.
+ *
+ * BIT[16:31]   5Ghz support for MCS 12 and 13, for NSS n[1:8] and BW < 80Mhz,
+ *              bits 16-23 should be used and for BW > 80Mhz, next 8 bits
+ *              (24-31)
+ *
+ * Some Possible values are as below
+ * 0          - MCS 12 and 13 disabled for 2.4Ghz and 5Ghz for all nss and
+ *              BW > 80Mz and <= 80Mhz
+ * 0x3030303  - MCS 12 and 13 enabled for 2.4Ghz and 5Ghz for NSS 1 and 2 for
+ *              BW > 80Mhz and <= 80Mhz
+ * 0x0303     - MCS 12 and 13 enabled for 2.4Ghz NSS 1 and 2 for BW > 80Mhz and
+ *              <= 80Mhz but disabled for 5Ghz
+ * 0x3030000  - MCS 12 and 13 enabled for 5Ghz NSS 1 and 2 for BW > 80Mhz and
+ *              <= 80Mhz but disabled for 2.4Ghz
+ * 0x30000    - MCS 12 and 13 enabled for 5Ghz NSS 1 and 2 for BW <= 80Mhz and
+ *              disabled for BW > 80Mhz. And disabled for 2.4Ghz
+ * 0x3          MCS 12 and 13 enabled for 2.4Ghz NSS 1 and 2 for BW <= 80Mhz and
+ *              disabled for all
+ *
+ * Related: None
+ *
+ * Supported Feature: HE MCS 12 and 13
+ *
+ * Usage: Internal
+ *
+ * </ini>
+ */
+#define CFG_HE_MCS_12_13_SUPPORT CFG_INI_UINT("he_mcs_12_13_support", \
+				0, 0xffffffff, 0xffffffff, \
+				CFG_VALUE_OR_DEFAULT, \
+				"He Configure MCS_12_13 bits")
+
+#define CFG_HE_CAPS_ALL \
 	CFG(CFG_HE_CONTROL) \
 	CFG(CFG_HE_TWT_REQUESTOR) \
 	CFG(CFG_HE_TWT_RESPONDER) \
@@ -788,7 +838,8 @@
 	CFG(CFG_HE_DYNAMIC_FRAGMENTATION) \
 	CFG(CFG_ENABLE_UL_MIMO) \
 	CFG(CFG_ENABLE_UL_OFDMA) \
-	CFG(CFG_HE_STA_OBSSPD)
+	CFG(CFG_HE_STA_OBSSPD) \
+	CFG(CFG_HE_MCS_12_13_SUPPORT)
 
 #endif /* __CFG_MLME_HE_CAPS_H */