Initial commit of WMI header files from cld3.0 1.1

Initial commit of WMI header files from cld3.0 1.1

Change-Id: I79e18d445d8634e269fca8481d74aca7f5c22a4f
CRs-Fixed: 1080379

fw/cepci.h

@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2013-2014, 2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef __CEPCI_H__
+#define __CEPCI_H__
+
+/*
+ * Support for Copy Engine over PCI.
+ * Structures shared between Host software and Target firmware.
+ */
+
+
+/*
+ * Total number of PCIe MSI interrupts requested for all interrupt sources.
+ * PCIe standard forces this to be a power of 2.
+ * Some Host OS's limit MSI requests that can be granted to 8
+ * so for now we abide by this limit and avoid requesting more
+ * than that.
+ */
+#define MSI_NUM_REQUEST_LOG2  3
+#define MSI_NUM_REQUEST       (1<<MSI_NUM_REQUEST_LOG2)
+
+/*
+ * Granted MSIs are assigned as follows:
+ *  Firmware uses the first
+ *  Remaining MSIs, if any, are used by Copy Engines
+ * This mapping is known to both Target firmware and Host software.
+ * It may be changed as long as Host and Target are kept in sync.
+ */
+#define MSI_ASSIGN_FW         0 /* 1 MSI for firmware (errors, etc.) */
+#define MSI_ASSIGN_CE_INITIAL 1 /* 7 MSIs for Copy Engines */
+#define MSI_ASSIGN_CE_MAX     7
+
+
+
+
+/*
+ * PCI-specific Target state.  Much of this may be of interest
+ * to the Host so HOST_INTEREST->hi_interconnect_state points
+ * here (and all members are 32-bit quantities in order to
+ * facilitate Host access). In particular, Host software is
+ * required to initialize pipe_cfg_addr and svc_to_pipe_map.
+ */
+struct pcie_state_s {
+    A_UINT32 pipe_cfg_addr;      /* Pipe configuration Target address */
+                                 /* NB: CE_pipe_config[CE_COUNT] */
+
+    A_UINT32 svc_to_pipe_map;    /* Service to pipe map Target address */
+                                 /* NB: service_to_pipe[PIPE_TO_CE_MAP_CN] */
+
+    A_UINT32 MSI_requested;      /* number of MSI interrupts requested */
+    A_UINT32 MSI_granted;        /* number of MSI interrupts granted */
+    A_UINT32 MSI_addr;           /* Message Signalled Interrupt address */
+    A_UINT32 MSI_data;           /* Base data */
+    A_UINT32 MSI_fw_intr_data;   /* Data for firmware interrupt;
+                                    MSI data for other interrupts are
+                                    in various SoC registers */
+
+    A_UINT32 power_mgmt_method;  /* PCIE_PWR_METHOD_* */
+    A_UINT32 config_flags;       /* PCIE_CONFIG_FLAG_* */
+};
+
+/*
+ * PCIE_CONFIG_FLAG definitions
+ */
+
+#define PCIE_CONFIG_FLAG_ENABLE_L1  0x0000001
+#define CE_PKTLOG_PIPE   8      /* used by both host and target side */
+
+#define PCIE_CONFIG_FLAG_CLK_GATING_L1      0x0000001
+#define PCIE_CONFIG_FLAG_CLK_SWITCH_WAIT    0x0000002
+#define PCIE_CONFIG_FLAG_AXI_CLK_GATE       0x0000004
+#define PCIE_CONFIG_FLAG_CLK_REQ_L1         0x0000008
+
+#define PIPE_TO_CE_MAP_CNT 32 /* simple implementation constant */
+
+/*
+ * Configuration information for a Copy Engine pipe.
+ * Passed from Host to Target during startup (one per CE).
+ */
+struct CE_pipe_config {
+    A_UINT32 pipenum;
+    A_UINT32 pipedir;
+    A_UINT32 nentries;
+    A_UINT32 nbytes_max;
+    A_UINT32 flags;
+    A_UINT32 reserved;
+};
+
+#endif /* __CEPCI_H__ */

fw/dbglog.h

@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2012, 2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef _DBGLOG_H_
+#define _DBGLOG_H_
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include <wlan_module_ids.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#define DBGLOG_TIMESTAMP_OFFSET          0
+#define DBGLOG_TIMESTAMP_MASK            0xFFFFFFFF /* Bit 0-15. Contains bit
+                                                       8-23 of the LF0 timer */
+#define DBGLOG_DBGID_OFFSET              0
+#define DBGLOG_DBGID_MASK                0x000003FF /* Bit 0-9 */
+#define DBGLOG_DBGID_NUM_MAX             256 /* Upper limit is width of mask */
+
+#define DBGLOG_MODULEID_OFFSET           10
+#define DBGLOG_MODULEID_MASK             0x0003FC00 /* Bit 10-17 */
+#define DBGLOG_MODULEID_NUM_MAX          32 /* Upper limit is width of mask */
+
+#define DBGLOG_VDEVID_OFFSET              18
+#define DBGLOG_VDEVID_MASK                0x03FC0000 /* Bit 20-25*/
+#define DBGLOG_VDEVID_NUM_MAX             16
+
+#define DBGLOG_NUM_ARGS_OFFSET             26
+#define DBGLOG_NUM_ARGS_MASK               0xFC000000 /* Bit 26-31 */
+#define DBGLOG_NUM_ARGS_MAX                9 /* it is bcoz of limitation
+                                             of corebsp MSG*() to accept max 9 arg  */
+
+#define DBGLOG_LOG_BUFFER_SIZE             1500
+#define DBGLOG_DBGID_DEFINITION_LEN_MAX    90
+
+#define DBGLOG_HOST_LOG_BUFFER_SIZE            DBGLOG_LOG_BUFFER_SIZE
+
+#define DBGLOG_GET_DBGID(arg) \
+    ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET)
+
+#define DBGLOG_GET_MODULEID(arg) \
+    ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET)
+
+#define DBGLOG_GET_VDEVID(arg) \
+    ((arg & DBGLOG_VDEVID_MASK) >> DBGLOG_VDEVID_OFFSET)
+
+#define DBGLOG_GET_NUMARGS(arg) \
+    ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET)
+
+#define DBGLOG_GET_TIME_STAMP(arg) \
+    ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET)
+
+
+/* Debug Log levels*/
+
+typedef enum {
+    DBGLOG_VERBOSE = 0,
+    DBGLOG_INFO,
+    DBGLOG_INFO_LVL_1,
+    DBGLOG_INFO_LVL_2,
+    DBGLOG_WARN,
+    DBGLOG_ERR,
+    DBGLOG_LVL_MAX
+}DBGLOG_LOG_LVL;
+
+PREPACK struct dbglog_buf_s {
+    struct dbglog_buf_s *next;
+    A_UINT8             *buffer;
+    A_UINT32             bufsize;
+    A_UINT32             length;
+    A_UINT32             count;
+    A_UINT32             free;
+} POSTPACK;
+
+PREPACK struct dbglog_hdr_s {
+    struct dbglog_buf_s *dbuf;
+    A_UINT32             dropped;
+} POSTPACK;
+
+#define DBGLOG_MAX_VDEVID 15 /* 0-15 */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _DBGLOG_H_ */

fw/dbglog_id.h

@@ -0,0 +1,1744 @@
+/*
+ * Copyright (c) 2013-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef _DBGLOG_ID_H_
+#define _DBGLOG_ID_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * The nomenclature for the debug identifiers is MODULE_DESCRIPTION.
+ * Please ensure that the definition of any new debugid introduced is captured
+ * between the <MODULE>_DBGID_DEFINITION_START and
+ * <MODULE>_DBGID_DEFINITION_END defines. The structure is required for the
+ * parser to correctly pick up the values for different debug identifiers.
+ */
+
+/*
+* The target state machine framework will send dbglog messages on behalf on
+* other modules. We do this do avoid each module adding identical dbglog code
+* for state transitions and event processing. We also don't want to force each
+* module to define the the same XXX_DBGID_SM_MSG with the same value below.
+* Instead we use a special ID that the host dbglog code recognizes as a
+* message sent by the SM on behalf on another module.
+*/
+#define DBGLOG_DBGID_SM_FRAMEWORK_PROXY_DBGLOG_MSG 1000
+
+
+/* INF debug identifier definitions */
+#define INF_DBGID_DEFINITION_START                    0
+#define INF_ASSERTION_FAILED                          1
+#define INF_TARGET_ID                                 2
+#define INF_TARGET_MEM_REMAING                3
+#define INF_TARGET_MEM_EXT_REMAING                    4
+#define INF_TARGET_MEM_ALLOC_TRACK                    5
+#define INF_TARGET_MEM_ALLOC_RAM                      6
+#define INF_DBGID_DEFINITION_END                      7
+
+/* WMI debug identifier definitions */
+#define WMI_DBGID_DEFINITION_START                    0
+#define WMI_CMD_RX_XTND_PKT_TOO_SHORT                 1
+#define WMI_EXTENDED_CMD_NOT_HANDLED                  2
+#define WMI_CMD_RX_PKT_TOO_SHORT                      3
+#define WMI_CALLING_WMI_EXTENSION_FN                  4
+#define WMI_CMD_NOT_HANDLED                           5
+#define WMI_IN_SYNC                                   6
+#define WMI_TARGET_WMI_SYNC_CMD                       7
+#define WMI_SET_SNR_THRESHOLD_PARAMS                  8
+#define WMI_SET_RSSI_THRESHOLD_PARAMS                 9
+#define WMI_SET_LQ_TRESHOLD_PARAMS                   10
+#define WMI_TARGET_CREATE_PSTREAM_CMD                11
+#define WMI_WI_DTM_INUSE                             12
+#define WMI_TARGET_DELETE_PSTREAM_CMD                13
+#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD       14
+#define WMI_TARGET_GET_BIT_RATE_CMD                  15
+#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS       16
+#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD        17
+#define WMI_TARGET_GET_TX_PWR_CMD                    18
+#define WMI_FREE_EVBUF_WMIBUF                        19
+#define WMI_FREE_EVBUF_DATABUF                       20
+#define WMI_FREE_EVBUF_BADFLAG                       21
+#define WMI_HTC_RX_ERROR_DATA_PACKET                 22
+#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX             23
+#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT      24
+#define WMI_SENDING_READY_EVENT                      25
+#define WMI_SETPOWER_MDOE_TO_MAXPERF                 26
+#define WMI_SETPOWER_MDOE_TO_REC                     27
+#define WMI_BSSINFO_EVENT_FROM                       28
+#define WMI_TARGET_GET_STATS_CMD                     29
+#define WMI_SENDING_SCAN_COMPLETE_EVENT              30
+#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT        31
+#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT       32
+#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT     33
+#define WMI_SENDING_ERROR_REPORT_EVENT               34
+#define WMI_SENDING_CAC_EVENT                        35
+#define WMI_TARGET_GET_ROAM_TABLE_CMD                36
+#define WMI_TARGET_GET_ROAM_DATA_CMD                 37
+#define WMI_SENDING_GPIO_INTR_EVENT                  38
+#define WMI_SENDING_GPIO_ACK_EVENT                   39
+#define WMI_SENDING_GPIO_DATA_EVENT                  40
+#define WMI_CMD_RX                                   41
+#define WMI_CMD_RX_XTND                              42
+#define WMI_EVENT_SEND                               43
+#define WMI_EVENT_SEND_XTND                          44
+#define WMI_CMD_PARAMS_DUMP_START                    45
+#define WMI_CMD_PARAMS_DUMP_END                      46
+#define WMI_CMD_PARAMS                               47
+#define WMI_EVENT_ALLOC_FAILURE                      48
+#define WMI_DBGID_DCS_PARAM_CMD                      49
+#define WMI_SEND_EVENT_WRONG_TLV                     50
+#define WMI_SEND_EVENT_NO_TLV_DEF                    51
+#define WMI_RECV_CMD_WRONG_TLV                              52
+#define WMI_CHECK_TLV_PARAM_GET_NUM_TLVS_ERROR              53
+#define WMI_CHECK_TLV_PARAM_TLV_LEN_EXCEEDED_BUF_LEN        54
+#define WMI_CHECK_TLV_PARAM_NONEXISTING_TAG_ORDER           55
+#define WMI_CHECK_TLV_PARAM_WRONG_TAG_ORDER                 56
+#define WMI_CHECK_TLV_PARAM_INVALID_TLV_DEF_ARRAY_SIZE      57
+#define WMI_CHECK_TLV_PARAM_INVALID_TLV_DEF_VARIED_SIZE     58
+#define WMI_CHECK_TLV_PARAM_WRONG_TLV_LENGTH                59
+#define WMI_CHECK_TLV_PARAM_UNALIGNED_TLV_LEN               60
+#define WMI_CHECK_TLV_PARAM_WRONG_INNER_TLV_LEN             61
+#define WMI_CHECK_TLV_PARAM_UNSUPPORTED_ARRAY_TAG           62
+#define WMI_CHECK_TLV_PARAM_EXCEEDED_MAX_TLVs               63
+#define WMI_CHECK_TLV_PARAM_CMD_BUF_ALLOC_FAILED            64
+#define WMI_CHECK_TLV_PARAM_TLV_INFO                        65
+#define WMI_DBGID_DEFINITION_END                            66
+
+/*  PM Message definition*/
+#define PS_STA_DEFINITION_START                     0
+#define PS_STA_PM_ARB_REQUEST                       1
+#define PS_STA_DELIVER_EVENT                        2
+#define PS_STA_PSPOLL_SEQ_DONE                      3
+#define PS_STA_COEX_MODE                            4
+#define PS_STA_PSPOLL_ALLOW                         5
+#define PS_STA_SET_PARAM                            6
+#define PS_STA_SPECPOLL_TIMER_STARTED               7
+#define PS_STA_SPECPOLL_TIMER_STOPPED               8
+#define PS_STA_AVG_CHANNEL_CONGESTION               9
+#define PS_STA_DEFINITION_END                       10
+
+/** RESMGR dbg ids */
+/* TODO: 1. Segregate IDs as per sub-module. (Give 100 per sub-module?)
+ *       2. Add chmgr IDs over here.
+ *       3. Update prints in dbglog_host.c
+ *       4. Deprecate WLAN_MODULE_RESMGR_CHAN_MANAGER */
+#define RESMGR_DEFINITION_START                     0
+#define RESMGR_OCS_ALLOCRAM_SIZE                    1
+#define RESMGR_OCS_RESOURCES                        2
+#define RESMGR_LINK_CREATE                          3
+#define RESMGR_LINK_DELETE                          4
+#define RESMGR_OCS_CHREQ_CREATE                     5
+#define RESMGR_OCS_CHREQ_DELETE                     6
+#define RESMGR_OCS_CHREQ_START                      7
+#define RESMGR_OCS_CHREQ_STOP                       8
+#define RESMGR_OCS_SCHEDULER_INVOKED                9
+#define RESMGR_OCS_CHREQ_GRANT                      10
+#define RESMGR_OCS_CHREQ_COMPLETE                   11
+#define RESMGR_OCS_NEXT_TSFTIME                     12
+#define RESMGR_OCS_TSF_TIMEOUT_US                   13
+#define RESMGR_OCS_CURR_CAT_WINDOW                  14
+#define RESMGR_OCS_CURR_CAT_WINDOW_REQ              15
+#define RESMGR_OCS_CURR_CAT_WINDOW_TIMESLOT         16
+#define RESMGR_OCS_CHREQ_RESTART                    17
+#define RESMGR_OCS_CLEANUP_CH_ALLOCATORS            18
+#define RESMGR_OCS_PURGE_CHREQ                      19
+#define RESMGR_OCS_CH_ALLOCATOR_FREE                20
+#define RESMGR_OCS_RECOMPUTE_SCHEDULE               21
+#define RESMGR_OCS_NEW_CAT_WINDOW_REQ               22
+#define RESMGR_OCS_NEW_CAT_WINDOW_TIMESLOT          23
+#define RESMGR_OCS_CUR_CH_ALLOC                     24
+#define RESMGR_OCS_WIN_CH_ALLOC                     25
+#define RESMGR_OCS_SCHED_CH_CHANGE                  26
+#define RESMGR_OCS_CONSTRUCT_CAT_WIN                27
+#define RESMGR_OCS_CHREQ_PREEMPTED                  28
+#define RESMGR_OCS_CH_SWITCH_REQ                    29
+#define RESMGR_OCS_CHANNEL_SWITCHED                 30
+#define RESMGR_OCS_CLEANUP_STALE_REQS               31
+#define RESMGR_OCS_CHREQ_UPDATE                     32
+#define RESMGR_OCS_REG_NOA_NOTIF                    33
+#define RESMGR_OCS_DEREG_NOA_NOTIF                  34
+#define RESMGR_OCS_GEN_PERIODIC_NOA                 35
+#define RESMGR_OCS_RECAL_QUOTAS                     36
+#define RESMGR_OCS_GRANTED_QUOTA_STATS              37
+#define RESMGR_OCS_ALLOCATED_QUOTA_STATS            38
+#define RESMGR_OCS_REQ_QUOTA_STATS                  39
+#define RESMGR_OCS_TRACKING_TIME_FIRED              40
+#define RESMGR_VC_ARBITRATE_ATTRIBUTES              41
+#define RESMGR_OCS_LATENCY_STRICT_TIME_SLOT         42
+#define RESMGR_OCS_CURR_TSF                         43
+#define RESMGR_OCS_QUOTA_REM                        44
+#define RESMGR_OCS_LATENCY_CASE_NO                  45
+#define RESMGR_OCS_WIN_CAT_DUR                      46
+#define RESMGR_VC_UPDATE_CUR_VC                     47
+#define RESMGR_VC_REG_UNREG_LINK                    48
+#define RESMGR_VC_PRINT_LINK                        49
+#define RESMGR_OCS_MISS_TOLERANCE                   50
+#define RESMGR_DYN_SCH_ALLOCRAM_SIZE                51
+#define RESMGR_DYN_SCH_ENABLE                       52
+#define RESMGR_DYN_SCH_ACTIVE                       53
+#define RESMGR_DYN_SCH_CH_STATS_START               54
+#define RESMGR_DYN_SCH_CH_SX_STATS                  55
+#define RESMGR_DYN_SCH_TOT_UTIL_PER                 56
+#define RESMGR_DYN_SCH_HOME_CH_QUOTA                57
+#define RESMGR_OCS_REG_RECAL_QUOTA_NOTIF            58
+#define RESMGR_OCS_DEREG_RECAL_QUOTA_NOTIF          59
+#define RESMGR_DYN_SCH_CH_STATS_END                 60
+#define RESMGR_DEFINITION_END                       61
+
+/* RESMGR CHNMGR debug ids */
+#define RESMGR_CHMGR_DEFINITION_START               0
+#define RESMGR_CHMGR_PAUSE_COMPLETE                 1
+#define RESMGR_CHMGR_CHANNEL_CHANGE                 2
+#define RESMGR_CHMGR_RESUME_COMPLETE                3
+#define RESMGR_CHMGR_VDEV_PAUSE                     4
+#define RESMGR_CHMGR_VDEV_UNPAUSE                   5
+#define RESMGR_CHMGR_CTS2S_TX_COMP                  6
+#define RESMGR_CHMGR_CFEND_TX_COMP                  7
+#define RESMGR_CHMGR_DEFINITION_END                 8
+
+/* VDEV manager debug ids */
+#define VDEV_MGR_DEFINITION_START                   0
+#define VDEV_MGR_FIRST_BMISS_DETECTED               1
+#define VDEV_MGR_FINAL_BMISS_DETECTED               2
+#define VDEV_MGR_BCN_IN_SYNC                        3
+#define VDEV_MGR_AP_KEEPALIVE_IDLE                  4
+#define VDEV_MGR_AP_KEEPALIVE_INACTIVE              5
+#define VDEV_MGR_AP_KEEPALIVE_UNRESPONSIVE          6
+#define VDEV_MGR_AP_TBTT_CONFIG                     7
+#define VDEV_MGR_FIRST_BCN_RECEIVED                 8
+#define VDEV_MGR_VDEV_START                         9
+#define VDEV_MGR_VDEV_UP                            10
+#define VDEV_MGR_PEER_AUTHORIZED                    11
+#define VDEV_MGR_OCS_HP_LP_REQ_POSTED               12
+#define VDEV_MGR_VDEV_START_OCS_HP_REQ_COMPLETE     13
+#define VDEV_MGR_VDEV_START_OCS_HP_REQ_STOP         14
+#define VDEV_MGR_HP_START_TIME                      15
+#define VDEV_MGR_VDEV_PAUSE_DELAY_UPDATE            16
+#define VDEV_MGR_VDEV_PAUSE_FAIL                    17
+#define VDEV_MGR_GEN_PERIODIC_NOA                   18
+#define VDEV_MGR_OFF_CHAN_GO_CH_REQ_SETUP           19
+#define VDEV_MGR_DEFINITION_END                     20
+
+/* WHAL debug identifier definitions */
+#define WHAL_DBGID_DEFINITION_START                 0
+#define WHAL_ERROR_ANI_CONTROL                      1
+#define WHAL_ERROR_CHIP_TEST1                       2
+#define WHAL_ERROR_CHIP_TEST2                       3
+#define WHAL_ERROR_EEPROM_CHECKSUM                  4
+#define WHAL_ERROR_EEPROM_MACADDR                   5
+#define WHAL_ERROR_INTERRUPT_HIU                    6
+#define WHAL_ERROR_KEYCACHE_RESET                   7
+#define WHAL_ERROR_KEYCACHE_SET                     8
+#define WHAL_ERROR_KEYCACHE_TYPE                    9
+#define WHAL_ERROR_KEYCACHE_TKIPENTRY              10
+#define WHAL_ERROR_KEYCACHE_WEPLENGTH              11
+#define WHAL_ERROR_PHY_INVALID_CHANNEL             12
+#define WHAL_ERROR_POWER_AWAKE                     13
+#define WHAL_ERROR_POWER_SET                       14
+#define WHAL_ERROR_RECV_STOPDMA                    15
+#define WHAL_ERROR_RECV_STOPPCU                    16
+#define WHAL_ERROR_RESET_CHANNF1                   17
+#define WHAL_ERROR_RESET_CHANNF2                   18
+#define WHAL_ERROR_RESET_PM                        19
+#define WHAL_ERROR_RESET_OFFSETCAL                 20
+#define WHAL_ERROR_RESET_RFGRANT                   21
+#define WHAL_ERROR_RESET_RXFRAME                   22
+#define WHAL_ERROR_RESET_STOPDMA                   23
+#define WHAL_ERROR_RESET_ERRID                     24
+#define WHAL_ERROR_RESET_ADCDCCAL1                 25
+#define WHAL_ERROR_RESET_ADCDCCAL2                 26
+#define WHAL_ERROR_RESET_TXIQCAL                   27
+#define WHAL_ERROR_RESET_RXIQCAL                   28
+#define WHAL_ERROR_RESET_CARRIERLEAK               29
+#define WHAL_ERROR_XMIT_COMPUTE                    30
+#define WHAL_ERROR_XMIT_NOQUEUE                    31
+#define WHAL_ERROR_XMIT_ACTIVEQUEUE                32
+#define WHAL_ERROR_XMIT_BADTYPE                    33
+#define WHAL_ERROR_XMIT_STOPDMA                    34
+#define WHAL_ERROR_INTERRUPT_BB_PANIC              35
+#define WHAL_ERROR_PAPRD_MAXGAIN_ABOVE_WINDOW      36
+#define WHAL_ERROR_QCU_HW_PAUSE_MISMATCH           37
+#define WHAL_ERROR_POWER_RFLP_CONFIG               38
+#define WHAL_ERROR_POWER_RFLP_SYNTHBYPASS_CONFIG   39
+#define WHAL_ERROR_POWER_RFLP_BIAS2X_CONFIG        40
+#define WHAL_ERROR_POWER_RFLP_PLLBYPASS_CONFIG     41
+#define WHAL_ERROR_POWER_RFLP_OFF1CHAN_CONFIG      42
+#define WHAL_ERROR_POWER_ANTENNA_LMIT              43
+#define WHAL_ERROR_POWER_REGDMN_TX_LMIT            44
+#define WHAL_ERROR_POWER_MODE_SCALED_PWR           45
+#define WHAL_ERROR_POWER_EDGE_PWR_TPSCALE          46
+#define WHAL_ERROR_POWER_CHAN_REGALLOW             47
+#define WHAL_ERROR_WAIT_REG_TIMEOUT                48
+#define WHAL_ERROR_XTAL_SET                        49
+#define WHAL_DBGID_DEFINITION_END                  50
+
+#define COEX_DEBUGID_START                          0
+#define BTCOEX_DBG_MCI_1                            1
+#define BTCOEX_DBG_MCI_2                            2
+#define BTCOEX_DBG_MCI_3                            3
+#define BTCOEX_DBG_MCI_4                            4
+#define BTCOEX_DBG_MCI_5                            5
+#define BTCOEX_DBG_MCI_6                            6
+#define BTCOEX_DBG_MCI_7                            7
+#define BTCOEX_DBG_MCI_8                            8
+#define BTCOEX_DBG_MCI_9                            9
+#define BTCOEX_DBG_MCI_10                           10
+#define COEX_WAL_BTCOEX_INIT                        11
+#define COEX_WAL_PAUSE                              12
+#define COEX_WAL_RESUME                             13
+#define COEX_UPDATE_AFH                             14
+#define COEX_HWQ_EMPTY_CB                           15
+#define COEX_MCI_TIMER_HANDLER                      16
+#define COEX_MCI_RECOVER                            17
+#define ERROR_COEX_MCI_ISR                          18
+#define ERROR_COEX_MCI_GPM                          19
+#define COEX_ProfileType                            20
+#define COEX_LinkID                                 21
+#define COEX_LinkState                              22
+#define COEX_LinkRole                               23
+#define COEX_LinkRate                               24
+#define COEX_VoiceType                              25
+#define COEX_TInterval                              26
+#define COEX_WRetrx                                 27
+#define COEX_Attempts                               28
+#define COEX_PerformanceState                       29
+#define COEX_LinkType                               30
+#define COEX_RX_MCI_GPM_VERSION_QUERY               31
+#define COEX_RX_MCI_GPM_VERSION_RESPONSE            32
+#define COEX_RX_MCI_GPM_STATUS_QUERY                33
+#define COEX_STATE_WLAN_VDEV_DOWN                   34
+#define COEX_STATE_WLAN_VDEV_START                  35
+#define COEX_STATE_WLAN_VDEV_CONNECTED              36
+#define COEX_STATE_WLAN_VDEV_SCAN_STARTED           37
+#define COEX_STATE_WLAN_VDEV_SCAN_END               38
+#define COEX_STATE_WLAN_DEFAULT                     39
+#define COEX_CHANNEL_CHANGE                         40
+#define COEX_POWER_CHANGE                           41
+#define COEX_CONFIG_MGR                             42
+#define COEX_TX_MCI_GPM_BT_CAL_REQ                  43
+#define COEX_TX_MCI_GPM_BT_CAL_GRANT                44
+#define COEX_TX_MCI_GPM_BT_CAL_DONE                 45
+#define COEX_TX_MCI_GPM_WLAN_CAL_REQ                46
+#define COEX_TX_MCI_GPM_WLAN_CAL_GRANT              47
+#define COEX_TX_MCI_GPM_WLAN_CAL_DONE               48
+#define COEX_TX_MCI_GPM_BT_DEBUG                    49
+#define COEX_TX_MCI_GPM_VERSION_QUERY               50
+#define COEX_TX_MCI_GPM_VERSION_RESPONSE            51
+#define COEX_TX_MCI_GPM_STATUS_QUERY                52
+#define COEX_TX_MCI_GPM_HALT_BT_GPM                 53
+#define COEX_TX_MCI_GPM_WLAN_CHANNELS               54
+#define COEX_TX_MCI_GPM_BT_PROFILE_INFO             55
+#define COEX_TX_MCI_GPM_BT_STATUS_UPDATE            56
+#define COEX_TX_MCI_GPM_BT_UPDATE_FLAGS             57
+#define COEX_TX_MCI_GPM_UNKNOWN                     58
+#define COEX_TX_MCI_SYS_WAKING                      59
+#define COEX_TX_MCI_LNA_TAKE                        60
+#define COEX_TX_MCI_LNA_TRANS                       61
+#define COEX_TX_MCI_SYS_SLEEPING                    62
+#define COEX_TX_MCI_REQ_WAKE                        63
+#define COEX_TX_MCI_REMOTE_RESET                    64
+#define COEX_TX_MCI_TYPE_UNKNOWN                    65
+#define COEX_WHAL_MCI_RESET                         66
+#define COEX_POLL_BT_CAL_DONE_TIMEOUT               67
+#define COEX_WHAL_PAUSE                             68
+#define COEX_RX_MCI_GPM_BT_CAL_REQ                  69
+#define COEX_RX_MCI_GPM_BT_CAL_DONE                 70
+#define COEX_RX_MCI_GPM_BT_CAL_GRANT                71
+#define COEX_WLAN_CAL_START                         72
+#define COEX_WLAN_CAL_RESULT                        73
+#define COEX_BtMciState                             74
+#define COEX_BtCalState                             75
+#define COEX_WlanCalState                           76
+#define COEX_RxReqWakeCount                         77
+#define COEX_RxRemoteResetCount                     78
+#define COEX_RESTART_CAL                            79
+#define COEX_SENDMSG_QUEUE                          80
+#define COEX_RESETSEQ_LNAINFO_TIMEOUT               81
+#define COEX_MCI_ISR_IntRaw                         82
+#define COEX_MCI_ISR_Int1Raw                        83
+#define COEX_MCI_ISR_RxMsgRaw                       84
+#define COEX_WHAL_COEX_RESET                        85
+#define COEX_WAL_COEX_INIT                          86
+#define COEX_TXRX_CNT_LIMIT_ISR                     87
+#define COEX_CH_BUSY                                88
+#define COEX_REASSESS_WLAN_STATE                    89
+#define COEX_BTCOEX_WLAN_STATE_UPDATE               90
+#define COEX_BT_NUM_OF_PROFILES                     91
+#define COEX_BT_NUM_OF_HID_PROFILES                 92
+#define COEX_BT_NUM_OF_ACL_PROFILES                 93
+#define COEX_BT_NUM_OF_HI_ACL_PROFILES              94
+#define COEX_BT_NUM_OF_VOICE_PROFILES               95
+#define COEX_WLAN_AGGR_LIMIT                        96
+#define COEX_BT_LOW_PRIO_BUDGET                     97
+#define COEX_BT_HI_PRIO_BUDGET                      98
+#define COEX_BT_IDLE_TIME                           99
+#define COEX_SET_COEX_WEIGHT                        100
+#define COEX_WLAN_WEIGHT_GROUP                      101
+#define COEX_BT_WEIGHT_GROUP                        102
+#define COEX_BT_INTERVAL_ALLOC                      103
+#define COEX_BT_SCHEME                              104
+#define COEX_BT_MGR                                 105
+#define COEX_BT_SM_ERROR                            106
+#define COEX_SYSTEM_UPDATE                          107
+#define COEX_LOW_PRIO_LIMIT                         108
+#define COEX_HI_PRIO_LIMIT                          109
+#define COEX_BT_INTERVAL_START                      110
+#define COEX_WLAN_INTERVAL_START                    111
+#define COEX_NON_LINK_BUDGET                        112
+#define COEX_CONTENTION_MSG                         113
+#define COEX_SET_NSS                                114
+#define COEX_SELF_GEN_MASK                          115
+#define COEX_PROFILE_ERROR                          116
+#define COEX_WLAN_INIT                              117
+#define COEX_BEACON_MISS                            118
+#define COEX_BEACON_OK                              119
+#define COEX_BTCOEX_SCAN_ACTIVITY                   120
+#define COEX_SCAN_ACTIVITY                          121
+#define COEX_FORCE_QUIETTIME                        122
+#define COEX_BT_MGR_QUIETTIME                       123
+#define COEX_BT_INACTIVITY_TRIGGER                  124
+#define COEX_BT_INACTIVITY_REPORTED                 125
+#define COEX_TX_MCI_GPM_WLAN_PRIO                   126
+#define COEX_TX_MCI_GPM_BT_PAUSE_PROFILE            127
+#define COEX_TX_MCI_GPM_WLAN_SET_ACL_INACTIVITY     128
+#define COEX_RX_MCI_GPM_BT_ACL_INACTIVITY_REPORT    129
+#define COEX_GENERIC_ERROR                          130
+#define COEX_RX_RATE_THRESHOLD                      131
+#define COEX_RSSI                                   132
+
+#define COEX_WLAN_VDEV_NOTIF_START                  133
+#define COEX_WLAN_VDEV_NOTIF_UP                     134
+#define COEX_WLAN_VDEV_NOTIF_DOWN                   135
+#define COEX_WLAN_VDEV_NOTIF_STOP                   136
+#define COEX_WLAN_VDEV_NOTIF_ADD_PEER               137
+#define COEX_WLAN_VDEV_NOTIF_DELETE_PEER            138
+#define COEX_WLAN_VDEV_NOTIF_CONNECTED_PEER         139
+#define COEX_WLAN_VDEV_NOTIF_PAUSE                  140
+#define COEX_WLAN_VDEV_NOTIF_UNPAUSED               141
+#define COEX_STATE_WLAN_VDEV_PEER_ADD               142
+#define COEX_STATE_WLAN_VDEV_CONNECTED_PEER         143
+#define COEX_STATE_WLAN_VDEV_DELETE_PEER            144
+#define COEX_STATE_WLAN_VDEV_PAUSE                  145
+#define COEX_STATE_WLAN_VDEV_UNPAUSED               146
+#define COEX_SCAN_CALLBACK                          147
+#define COEX_RC_SET_CHAINMASK                       148
+#define COEX_TX_MCI_GPM_WLAN_SET_BT_RXSS_THRES      149
+#define COEX_TX_MCI_GPM_BT_RXSS_THRES_QUERY         150
+#define COEX_BT_RXSS_THRES                          151
+#define COEX_BT_PROFILE_ADD_RMV                     152
+#define COEX_BT_SCHED_INFO                          153
+#define COEX_TRF_MGMT                               154
+#define COEX_SCHED_START                            155
+#define COEX_SCHED_RESULT                           156
+#define COEX_SCHED_ERROR                            157
+#define COEX_SCHED_PRE_OP                           158
+#define COEX_SCHED_POST_OP                          159
+#define COEX_RX_RATE                                160
+#define COEX_ACK_PRIORITY                           161
+#define COEX_STATE_WLAN_VDEV_UP                     162
+#define COEX_STATE_WLAN_VDEV_PEER_UPDATE            163
+#define COEX_STATE_WLAN_VDEV_STOP                   164
+#define COEX_WLAN_PAUSE_PEER                        165
+#define COEX_WLAN_UNPAUSE_PEER                      166
+#define COEX_WLAN_PAUSE_INTERVAL_START              167
+#define COEX_WLAN_POSTPAUSE_INTERVAL_START          168
+#define COEX_TRF_FREERUN                            169
+#define COEX_TRF_SHAPE_PM                           170
+#define COEX_TRF_SHAPE_PSP                          171
+#define COEX_TRF_SHAPE_S_CTS                        172
+#define COEX_CHAIN_CONFIG                           173
+#define COEX_SYSTEM_MONITOR                         174
+#define COEX_SINGLECHAIN_INIT                       175
+#define COEX_MULTICHAIN_INIT                        176
+#define COEX_SINGLECHAIN_DBG_1                      177
+#define COEX_SINGLECHAIN_DBG_2                      178
+#define COEX_SINGLECHAIN_DBG_3                      179
+#define COEX_MULTICHAIN_DBG_1                       180
+#define COEX_MULTICHAIN_DBG_2                       181
+#define COEX_MULTICHAIN_DBG_3                       182
+#define COEX_PSP_TX_CB                              183
+#define COEX_PSP_RX_CB                              184
+#define COEX_PSP_STAT_1                             185
+#define COEX_PSP_SPEC_POLL                          186
+#define COEX_PSP_READY_STATE                        187
+#define COEX_PSP_TX_STATUS_STATE                    188
+#define COEX_PSP_RX_STATUS_STATE_1                  189
+#define COEX_PSP_NOT_READY_STATE                    190
+#define COEX_PSP_DISABLED_STATE                     191
+#define COEX_PSP_ENABLED_STATE                      192
+#define COEX_PSP_SEND_PSPOLL                        193
+#define COEX_PSP_MGR_ENTER                          194
+#define COEX_PSP_MGR_RESULT                         195
+#define COEX_PSP_NONWLAN_INTERVAL                   196
+#define COEX_PSP_STAT_2                             197
+#define COEX_PSP_RX_STATUS_STATE_2                  198
+#define COEX_PSP_ERROR                              199
+#define COEX_T2BT                                   200
+#define COEX_BT_DURATION                            201
+#define COEX_TX_MCI_GPM_WLAN_SCHED_INFO_TRIG        202
+#define COEX_TX_MCI_GPM_WLAN_SCHED_INFO_TRIG_RSP    203
+#define COEX_TX_MCI_GPM_SCAN_OP                     204
+#define COEX_TX_MCI_GPM_BT_PAUSE_GPM_TX             205
+#define COEX_CTS2S_SEND                             206
+#define COEX_CTS2S_RESULT                           207
+#define COEX_ENTER_OCS                              208
+#define COEX_EXIT_OCS                               209
+#define COEX_UPDATE_OCS                             210
+#define COEX_STATUS_OCS                             211
+#define COEX_STATS_BT                               212
+
+#define COEX_MWS_WLAN_INIT                          213
+#define COEX_MWS_WBTMR_SYNC                         214
+#define COEX_MWS_TYPE2_RX                           215
+#define COEX_MWS_TYPE2_TX                           216
+#define COEX_MWS_WLAN_CHAVD                         217
+#define COEX_MWS_WLAN_CHAVD_INSERT                  218
+#define COEX_MWS_WLAN_CHAVD_MERGE                   219
+#define COEX_MWS_WLAN_CHAVD_RPT                     220
+#define COEX_MWS_CP_MSG_SEND                        221
+#define COEX_MWS_CP_ESCAPE                          222
+#define COEX_MWS_CP_UNFRAME                         223
+#define COEX_MWS_CP_SYNC_UPDATE                     224
+#define COEX_MWS_CP_SYNC                            225
+#define COEX_MWS_CP_WLAN_STATE_IND                  226
+#define COEX_MWS_CP_SYNCRESP_TIMEOUT                227
+#define COEX_MWS_SCHEME_UPDATE                      228
+#define COEX_MWS_WLAN_EVENT                         229
+#define COEX_MWS_UART_UNESCAPE                      230
+#define COEX_MWS_UART_ENCODE_SEND                   231
+#define COEX_MWS_UART_RECV_DECODE                   232
+#define COEX_MWS_UL_HDL                             233
+#define COEX_MWS_REMOTE_EVENT                       234
+#define COEX_MWS_OTHER                              235
+#define COEX_MWS_ERROR                              236
+#define COEX_MWS_ANT_DIVERSITY                      237
+
+#define COEX_P2P_GO                                 238
+#define COEX_P2P_CLIENT                             239
+#define COEX_SCC_1                                  240
+#define COEX_SCC_2                                  241
+#define COEX_MCC_1                                  242
+#define COEX_MCC_2                                  243
+#define COEX_TRF_SHAPE_NOA                          244
+#define COEX_NOA_ONESHOT                            245
+#define COEX_NOA_PERIODIC                           246
+#define COEX_LE_1                                   247
+#define COEX_LE_2                                   248
+#define COEX_ANT_1                                  249
+#define COEX_ANT_2                                  250
+#define COEX_ENTER_NOA                              251
+#define COEX_EXIT_NOA                               252
+#define COEX_BT_SCAN_PROTECT                        253
+
+#define COEX_DEBUG_ID_END                           254
+
+#define SCAN_START_COMMAND_FAILED                   0
+#define SCAN_STOP_COMMAND_FAILED                    1
+#define SCAN_EVENT_SEND_FAILED                      2
+#define SCAN_ENGINE_START                           3
+#define SCAN_ENGINE_CANCEL_COMMAND                  4
+#define SCAN_ENGINE_STOP_DUE_TO_TIMEOUT             5
+#define SCAN_EVENT_SEND_TO_HOST                     6
+#define SCAN_EVENT_ADD                              7
+#define SCAN_EVENT_REM                              8
+#define SCAN_EVENT_PREEMPTED                        9
+#define SCAN_EVENT_RESTARTED                        10
+#define SCAN_EVENT_COMPLETED                        11
+#define SCAN_SM_REQ_NEXT_CH                         12
+#define SCAN_ENG_START                              13
+#define SCAN_ENG_CANCEL                             14
+#define SCAN_ENG_SPOOFED_MAC_ADDR                   15
+#define SCAN_ENG_PARAM_1                            16
+#define SCAN_ENG_PARAM_2                            17
+#define SCAN_ENG_MAX_SCAN_TIMEOUT                   18
+#define SCAN_ENG_START_IN_PROGRESS                  19
+#define SCAN_SM_START_COMMAND_FAILED                20
+#define SCAN_SCH_START                              21
+#define SCAN_SCH_START_INFO                         22
+#define SCAN_SCH_START_NEW_REQ_FAILED               23
+#define SCAN_SCH_START_ALLOC_FAIL                   24
+#define SCAN_SCH_ENGINE_STOP_DUE_TO_TIMEOUT         25
+#define SCAN_SCH_POLICY_EVENT                       26
+#define SCAN_SCH_CANCEL                             27
+#define SCAN_SCH_STOP_COMMAND_FAILED                28
+#define SCAN_SCH_NEXT_SCAN_FAILED                   29
+#define SCAN_WMI_SET_CHAN_LIST                      30
+#define SCAN_EVENT_STARTED                          31
+#define SCAN_EVENT_BSS_CHANNEL                      32
+#define SCAN_EVENT_FOREIGN_CHANNEL                  33
+#define SCAN_EVENT_DEQUEUED                         34
+#define SCAN_EVENT_START_FAILED                     35
+#define SCAN_EVENT_FOREIGN_CHANNEL_EXIT             36
+#define SCAN_SM_DISPATCH                            37
+#define SCAN_SM_TRANSITIONS                         38
+#define SCAN_SM_REQ_NEXT_CHAN                       39
+#define SCAN_SEND_PROBE_REQ_RET_VDEV                40
+#define SCAN_SEND_PROBE_REQ_RET_PLM                 41
+#define SCAN_SEND_PROBE_REQ_RET_PASSIVE             42
+#define SCAN_SEND_PROBE_REQ_RET_RADAR               43
+#define SCAN_SEND_PROBE_REQ_RET_DFS                 44
+#define SCAN_SEND_PROBE_REQ_INFO                    45
+#define SCAN_SM_CANCEL                              46
+#define SCAN_SM_PROBE_REQ_FRAME_SEND_FAILED         47
+#define SCAN_SCH_BANNED_MODULE                      48
+#define SCAN_SM_STATS_INFO                          49
+#define SCAN_DBGID_DEFINITION_END                   50
+
+#define BEACON_EVENT_SWBA_SEND_FAILED               0
+#define BEACON_EVENT_EARLY_RX_BMISS_STATUS          1
+#define BEACON_EVENT_EARLY_RX_SLEEP_SLOP            2
+#define BEACON_EVENT_EARLY_RX_CONT_BMISS_TIMEOUT    3
+#define BEACON_EVENT_EARLY_RX_PAUSE_SKIP_BCN_NUM    4
+#define BEACON_EVENT_EARLY_RX_CLK_DRIFT             5
+#define BEACON_EVENT_EARLY_RX_AP_DRIFT              6
+#define BEACON_EVENT_EARLY_RX_BCN_TYPE              7
+
+#define RATECTRL_DBGID_DEFINITION_START             0
+#define RATECTRL_DBGID_ASSOC                        1
+#define RATECTRL_DBGID_NSS_CHANGE                   2
+#define RATECTRL_DBGID_CHAINMASK_ERR                3
+#define RATECTRL_DBGID_UNEXPECTED_FRAME             4
+#define RATECTRL_DBGID_WAL_RCQUERY                  5
+#define RATECTRL_DBGID_WAL_RCUPDATE                 6
+#define RATECTRL_DBGID_GTX_UPDATE                   7
+#define RATECTRL_DBGID_DEFINITION_END               8
+
+#define AP_PS_DBGID_DEFINITION_START                0
+#define AP_PS_DBGID_UPDATE_TIM                      1
+#define AP_PS_DBGID_PEER_STATE_CHANGE               2
+#define AP_PS_DBGID_PSPOLL                          3
+#define AP_PS_DBGID_PEER_CREATE                     4
+#define AP_PS_DBGID_PEER_DELETE                     5
+#define AP_PS_DBGID_VDEV_CREATE                     6
+#define AP_PS_DBGID_VDEV_DELETE                     7
+#define AP_PS_DBGID_SYNC_TIM                        8
+#define AP_PS_DBGID_NEXT_RESPONSE                   9
+#define AP_PS_DBGID_START_SP                        10
+#define AP_PS_DBGID_COMPLETED_EOSP                  11
+#define AP_PS_DBGID_TRIGGER                         12
+#define AP_PS_DBGID_DUPLICATE_TRIGGER               13
+#define AP_PS_DBGID_UAPSD_RESPONSE                  14
+#define AP_PS_DBGID_SEND_COMPLETE                   15
+#define AP_PS_DBGID_SEND_N_COMPLETE                 16
+#define AP_PS_DBGID_DETECT_OUT_OF_SYNC_STA          17
+#define AP_PS_DBGID_DELIVER_CAB                     18
+#define AP_PS_DBGID_NO_CLIENT                       27
+#define AP_PS_DBGID_CLIENT_IN_PS_ACTIVE             28
+#define AP_PS_DBGID_CLIENT_IN_PS_NON_ACTIVE         29
+#define AP_PS_DBGID_CLIENT_IN_AWAKE                 30
+/* Enhanced Green AP DBGIDs */
+#define AP_PS_DBGID_EGAP_SET_PARAM                  31
+#define AP_PS_DBGID_EGAP_VDEV_START                 32
+#define AP_PS_DBGID_EGAP_VDEV_STOP                  33
+#define AP_PS_DBGID_EGAP_CONN_PEER                  34
+#define AP_PS_DBGID_EGAP_DELETE_PEER                35
+#define AP_PS_DBGID_EGAP_WAL_PEER_EVENT             36
+#define AP_PS_DBGID_EGAP_WAL_PDEV_EVENT             37
+#define AP_PS_DBGID_EGAP_NOTIF_STA_SLEEPING         38
+#define AP_PS_DBGID_EGAP_PROC_STA_SLEEPING          39
+#define AP_PS_DBGID_EGAP_PROC_STA_INACTIVITY        40
+#define AP_PS_DBGID_EGAP_CHANGE_CHAINMASK           41
+#define AP_PS_DBGID_EGAP_CHANGE_SM_STATE            42
+
+/* WLAN_MODULE_MGMT_TXRX Debugids*/
+#define MGMT_TXRX_DBGID_DEFINITION_START            0
+#define MGMT_TXRX_FORWARD_TO_HOST                   1
+#define MGMT_TXRX_MGMT_FRAME_BUFFER_FULL            2
+#define MGMT_TXRX_VDEV_USED_TO_SEND_FRAME_IS_FREE   3
+#define MGMT_TXRX_LOCAL_FRAME_SEND_FAILED           4
+#define MGMT_TXRX_DBGID_DEFINITION_END              5
+
+#define WAL_DBGID_DEFINITION_START                  0
+#define WAL_DBGID_FAST_WAKE_REQUEST                 1
+#define WAL_DBGID_FAST_WAKE_RELEASE                 2
+#define WAL_DBGID_SET_POWER_STATE                   3
+#define WAL_DBGID_CHANNEL_CHANGE_FORCE_RESET        5
+#define WAL_DBGID_CHANNEL_CHANGE                    6
+#define WAL_DBGID_VDEV_START                        7
+#define WAL_DBGID_VDEV_STOP                         8
+#define WAL_DBGID_VDEV_UP                           9
+#define WAL_DBGID_VDEV_DOWN                         10
+#define WAL_DBGID_SW_WDOG_RESET                     11
+#define WAL_DBGID_TX_SCH_REGISTER_TIDQ              12
+#define WAL_DBGID_TX_SCH_UNREGISTER_TIDQ            13
+#define WAL_DBGID_TX_SCH_TICKLE_TIDQ                14
+#define WAL_DBGID_XCESS_FAILURES                    15
+#define WAL_DBGID_AST_ADD_WDS_ENTRY                 16
+#define WAL_DBGID_AST_DEL_WDS_ENTRY                 17
+#define WAL_DBGID_AST_WDS_ENTRY_PEER_CHG            18
+#define WAL_DBGID_AST_WDS_SRC_LEARN_FAIL            19
+#define WAL_DBGID_STA_KICKOUT                       20
+#define WAL_DBGID_BAR_TX_FAIL                       21
+#define WAL_DBGID_BAR_ALLOC_FAIL                    22
+#define WAL_DBGID_LOCAL_DATA_TX_FAIL                23
+#define WAL_DBGID_SECURITY_PM4_QUEUED               24
+#define WAL_DBGID_SECURITY_GM1_QUEUED               25
+#define WAL_DBGID_SECURITY_PM4_SENT                 26
+#define WAL_DBGID_SECURITY_ALLOW_DATA               27
+#define WAL_DBGID_SECURITY_UCAST_KEY_SET            28
+#define WAL_DBGID_SECURITY_MCAST_KEY_SET            29
+#define WAL_DBGID_SECURITY_ENCR_EN                  30
+#define WAL_DBGID_BB_WDOG_TRIGGERED                 31
+#define WAL_DBGID_RX_LOCAL_BUFS_LWM                 32
+#define WAL_DBGID_RX_LOCAL_DROP_LARGE_MGMT          33
+#define WAL_DBGID_VHT_ILLEGAL_RATE_PHY_ERR_DETECTED 34
+#define WAL_DBGID_DEV_RESET                         35
+#define WAL_DBGID_TX_BA_SETUP                       36
+#define WAL_DBGID_RX_BA_SETUP                       37
+#define WAL_DBGID_DEV_TX_TIMEOUT                    38
+#define WAL_DBGID_DEV_RX_TIMEOUT                    39
+#define WAL_DBGID_STA_VDEV_XRETRY                   40
+#define WAL_DBGID_DCS                               41
+#define WAL_DBGID_MGMT_TX_FAIL                      42
+#define WAL_DBGID_SET_M4_SENT_MANUALLY              43
+#define WAL_DBGID_PROCESS_4_WAY_HANDSHAKE           44
+#define WAL_DBGID_WAL_CHANNEL_CHANGE_START          45
+#define WAL_DBGID_WAL_CHANNEL_CHANGE_COMPLETE       46
+#define WAL_DBGID_WHAL_CHANNEL_CHANGE_START         47
+#define WAL_DBGID_WHAL_CHANNEL_CHANGE_COMPLETE      48
+#define WAL_DBGID_TX_MGMT_DESCID_SEQ_TYPE_LEN       49
+#define WAL_DBGID_TX_DATA_MSDUID_SEQ_TYPE_LEN       50
+#define WAL_DBGID_TX_DISCARD                        51
+#define WAL_DBGID_TX_MGMT_COMP_DESCID_STATUS        52
+#define WAL_DBGID_TX_DATA_COMP_MSDUID_STATUS        53
+#define WAL_DBGID_RESET_PCU_CYCLE_CNT               54
+#define WAL_DBGID_SETUP_RSSI_INTERRUPTS             55
+#define WAL_DBGID_BRSSI_CONFIG                      56
+#define WAL_DBGID_CURRENT_BRSSI_AVE                 57
+#define WAL_DBGID_BCN_TX_COMP                       58
+#define WAL_DBGID_RX_REENTRY                        59
+#define WAL_DBGID_SET_HW_CHAINMASK                  60
+#define WAL_DBGID_SET_HW_CHAINMASK_TXRX_STOP_FAIL   61
+#define WAL_DBGID_GET_HW_CHAINMASK                  62
+#define WAL_DBGID_SMPS_DISABLE                      63
+#define WAL_DBGID_SMPS_ENABLE_HW_CNTRL              64
+#define WAL_DBGID_SMPS_SWSEL_CHAINMASK              65
+#define WAL_DBGID_SUSPEND                           66
+#define WAL_DBGID_RESUME                            67
+#define WAL_DBGID_PEER_TX_FAIL_CNT_THRES_EXCEEDED   68
+#define WAL_DBGID_RX_FULL_REORDER_SUPPORT           69
+#define WAL_DBGID_HCM_BIN                           70
+#define WAL_DBGID_HCM_BIN_PENALIZE                  71
+#define WAL_DBGID_HCM_BIN_DEPENALIZE                72
+#define WAL_DBGID_AST_UPDATE_WDS_ENTRY              73
+#define WAL_DBGID_PEER_EXT_STATS                    74
+#define WAL_DBGID_TX_AC_BUFFER_SET                  75
+#define WAL_DBGID_AST_ENTRY_EXIST                   76
+#define WAL_DBGID_AST_ENTRY_FULL                    77
+#define WAL_DBGID_WMMAC_TXQ_STATUS                  78
+#define WAL_DBGID_PROLONGED_TX_PPDU_TOTAL_US        79
+#define WAL_DBGID_UPDATE_USED_TIME                  80
+#define WAL_DBGID_PAST_WB_ACK_TIMESTAMP             81
+#define WAL_DBGID_WMMAC_ADD_DEL_TSPEC               82
+#define WAL_DBGID_WMMAC_TIMER_EXPIRY                83
+#define WAL_DBGID_WMMAC_PARAMS                      84
+#define WAL_DBGID_TX_MGMT_WAL_PEER_DOES_NOT_EXIST   85
+#define WAL_DBGID_TX_MGMT_WAL_PEER_DELETE_IN_PROGRESS 86
+#define WAL_DBGID_TX_MGMT_FRAME_DESC_ALLOC_FAILED   87
+#define WAL_DBGID_TX_MGMT_TID_STRUCT_NOT_FOUND      88
+#define WAL_DBGID_TX_MGMT_ENQUEUE_FAILED            89
+#define WAL_DBGID_TX_ARP                            90
+#define WAL_DBGID_TX_DHCP                           91
+#define WAL_DBGID_DEFINITION_END                    92
+
+#define ANI_DBGID_POLL                               0
+#define ANI_DBGID_CONTROL                            1
+#define ANI_DBGID_OFDM_PARAMS                        2
+#define ANI_DBGID_CCK_PARAMS                         3
+#define ANI_DBGID_RESET                              4
+#define ANI_DBGID_RESTART                            5
+#define ANI_DBGID_OFDM_LEVEL                         6
+#define ANI_DBGID_CCK_LEVEL                          7
+#define ANI_DBGID_FIRSTEP                            8
+#define ANI_DBGID_CYCPWR                             9
+#define ANI_DBGID_MRC_CCK                           10
+#define ANI_DBGID_SELF_CORR_LOW                     11
+#define ANI_DBGID_ENABLE                            12
+#define ANI_DBGID_CURRENT_LEVEL                     13
+#define ANI_DBGID_POLL_PERIOD                       14
+#define ANI_DBGID_LISTEN_PERIOD                     15
+#define ANI_DBGID_OFDM_LEVEL_CFG                    16
+#define ANI_DBGID_CCK_LEVEL_CFG                     17
+
+/* OFFLOAD Manager Debugids*/
+#define OFFLOAD_MGR_DBGID_DEFINITION_START             0
+#define OFFLOADMGR_REGISTER_OFFLOAD                    1
+#define OFFLOADMGR_DEREGISTER_OFFLOAD                  2
+#define OFFLOADMGR_NO_REG_DATA_HANDLERS                3
+#define OFFLOADMGR_NO_REG_EVENT_HANDLERS               4
+#define OFFLOADMGR_REG_OFFLOAD_FAILED                  5
+#define OFFLOADMGR_DEREG_OFFLOAD_FAILED                6
+#define OFFLOADMGR_ENTER_FAILED                        7
+#define OFFLOADMGR_EXIT_FAILED                         8
+#define OFFLOADMGR_GTK_FAILED                          9
+#define OFFLOADMGR_GTK_REKEY_FAILED                   10
+#define OFFLOADMGR_DBGID_DEFINITION_END               11
+
+/*Resource Debug IDs*/
+#define RESOURCE_DBGID_DEFINITION_START             0
+#define RESOURCE_PEER_ALLOC                         1
+#define RESOURCE_PEER_FREE                          2
+#define RESOURCE_PEER_ALLOC_WAL_PEER                3
+#define RESOURCE_PEER_NBRHOOD_MGMT_ALLOC            4
+#define RESOURCE_PEER_NBRHOOD_MGMT_INFO             5
+#define RESOURCE_SMALL_MGMT_BUF_FULL                6
+#define RESOURCE_MGMT_AVAIL_BUF_CNT_NOT_ENOUGH      7
+#define RESOURCE_MGMT_BUF_FULL                      8
+#define RESOURCE_MGMT_BUF_INC                       9
+#define RESOURCE_MGMT_BUF_DEC                       10
+#define RESOURCE_DBGID_DEFINITION_END               11
+
+/* DCS debug IDs*/
+#define WLAN_DCS_DBGID_INIT                         0
+#define WLAN_DCS_DBGID_WMI_CWINT                    1
+#define WLAN_DCS_DBGID_TIMER                        2
+#define WLAN_DCS_DBGID_CMDG                         3
+#define WLAN_DCS_DBGID_CMDS                         4
+#define WLAN_DCS_DBGID_DINIT                        5
+
+/*P2P Module ids*/
+#define P2P_DBGID_DEFINITION_START                          0
+#define P2P_DEV_REGISTER                                    1
+#define P2P_HANDLE_NOA                                      2
+#define P2P_UPDATE_SCHEDULE_OPPS                            3
+#define P2P_UPDATE_SCHEDULE                                 4
+#define P2P_UPDATE_START_TIME                               5
+#define P2P_UPDATE_START_TIME_DIFF_TSF32                    6
+#define P2P_UPDATE_START_TIME_FINAL                         7
+#define P2P_SETUP_SCHEDULE_TIMER                            8
+#define P2P_PROCESS_SCHEDULE_AFTER_CALC                     9
+#define P2P_PROCESS_SCHEDULE_STARTED_TIMER                  10
+#define P2P_CALC_SCHEDULES_FIRST_CALL_ALL_NEXT_EVENT        11
+#define P2P_CALC_SCHEDULES_FIRST_VALUE                      12
+#define P2P_CALC_SCHEDULES_EARLIEST_NEXT_EVENT              13
+#define P2P_CALC_SCHEDULES_SANITY_COUNT                     14
+#define P2P_CALC_SCHEDULES_CALL_ALL_NEXT_EVENT_FROM_WHILE_LOOP 15
+#define P2P_CALC_SCHEDULES_TIMEOUT_1                        16
+#define P2P_CALC_SCHEDULES_TIMEOUT_2                        17
+#define P2P_FIND_ALL_NEXT_EVENTS_REQ_EXPIRED                18
+#define P2P_FIND_ALL_NEXT_EVENTS_REQ_ACTIVE                 19
+#define P2P_FIND_NEXT_EVENT_REQ_NOT_STARTED                 20
+#define P2P_FIND_NEXT_EVENT_REQ_COMPLETE_NON_PERIODIC       21
+#define P2P_FIND_NEXT_EVENT_IN_MID_OF_NOA                   22
+#define P2P_FIND_NEXT_EVENT_REQ_COMPLETE                    23
+#define P2P_SCHEDULE_TIMEOUT                                24
+#define P2P_CALC_SCHEDULES_ENTER                            25
+#define P2P_PROCESS_SCHEDULE_ENTER                          26
+#define P2P_FIND_ALL_NEXT_EVENTS_INDIVIDUAL_REQ_AFTER_CHANGE    27
+#define P2P_FIND_ALL_NEXT_EVENTS_INDIVIDUAL_REQ_BEFORE_CHANGE   28
+#define P2P_FIND_ALL_NEXT_EVENTS_ENTER                      29
+#define P2P_FIND_NEXT_EVENT_ENTER                           30
+#define P2P_NOA_GO_PRESENT                                  31
+#define P2P_NOA_GO_ABSENT                                   32
+#define P2P_GO_NOA_NOTIF                                    33
+#define P2P_GO_TBTT_OFFSET                                  34
+#define P2P_GO_GET_NOA_INFO                                 35
+#define P2P_GO_ADD_ONE_SHOT_NOA                             36
+#define P2P_GO_GET_NOA_IE                                   37
+#define P2P_GO_BCN_TX_COMP                                  38
+#define P2P_DBGID_DEFINITION_END                            39
+
+
+//CSA modules DBGIDs
+#define CSA_DBGID_DEFINITION_START 0
+#define CSA_OFFLOAD_POOL_INIT 1
+#define CSA_OFFLOAD_REGISTER_VDEV 2
+#define CSA_OFFLOAD_DEREGISTER_VDEV 3
+#define CSA_DEREGISTER_VDEV_ERROR 4
+#define CSA_OFFLOAD_BEACON_RECEIVED 5
+#define CSA_OFFLOAD_BEACON_CSA_RECV 6
+#define CSA_OFFLOAD_CSA_RECV_ERROR_IE 7
+#define CSA_OFFLOAD_CSA_TIMER_ERROR 8
+#define CSA_OFFLOAD_CSA_TIMER_EXP 9
+#define CSA_OFFLOAD_WMI_EVENT_ERROR 10
+#define CSA_OFFLOAD_WMI_EVENT_SENT 11
+#define CSA_OFFLOAD_WMI_CHANSWITCH_RECV 12
+#define CSA_DBGID_DEFINITION_END 13
+
+/* Chatter module DBGIDs */
+#define WLAN_CHATTER_DBGID_DEFINITION_START 0
+#define WLAN_CHATTER_ENTER 1
+#define WLAN_CHATTER_EXIT 2
+#define WLAN_CHATTER_FILTER_HIT 3
+#define WLAN_CHATTER_FILTER_MISS 4
+#define WLAN_CHATTER_FILTER_FULL 5
+#define WLAN_CHATTER_FILTER_TM_ADJ  6
+#define WLAN_CHATTER_BUFFER_FULL    7
+#define WLAN_CHATTER_TIMEOUT        8
+#define WLAN_CHATTER_MC_FILTER_ADD  9
+#define WLAN_CHATTER_MC_FILTER_DEL  10
+#define WLAN_CHATTER_MC_FILTER_ALLOW  11
+#define WLAN_CHATTER_MC_FILTER_DROP  12
+#define WLAN_CHATTER_COALESCING_FILTER_ADD      13
+#define WLAN_CHATTER_COALESCING_FILTER_DEL      14
+#define WLAN_CHATTER_DBGID_DEFINITION_END       15
+
+#define WOW_DBGID_DEFINITION_START 0
+#define WOW_ENABLE_CMDID 1
+#define WOW_RECV_DATA_PKT 2
+#define WOW_WAKE_HOST_DATA 3
+#define WOW_RECV_MGMT 4
+#define WOW_WAKE_HOST_MGMT 5
+#define WOW_RECV_EVENT 6
+#define WOW_WAKE_HOST_EVENT 7
+#define WOW_INIT 8
+#define WOW_RECV_MAGIC_PKT 9
+#define WOW_RECV_BITMAP_PATTERN 10
+#define WOW_AP_VDEV_DISALLOW    11
+#define WOW_STA_VDEV_DISALLOW   12
+#define WOW_P2PGO_VDEV_DISALLOW 13
+#define WOW_NS_OFLD_ENABLE       14
+#define WOW_ARP_OFLD_ENABLE      15
+#define WOW_NS_ARP_OFLD_DISABLE  16
+#define WOW_NS_RECEIVED          17
+#define WOW_NS_REPLIED           18
+#define WOW_ARP_RECEIVED         19
+#define WOW_ARP_REPLIED          20
+#define WOW_BEACON_OFFLOAD_TX    21
+#define WOW_BEACON_OFFLOAD_CFG   22
+#define WOW_IBSS_VDEV_ALLOW      23
+#define WOW_DBGID_DEFINITION_END 24
+
+
+/* SWBMISS module DBGIDs */
+#define SWBMISS_DBGID_DEFINITION_START  0
+#define SWBMISS_ENABLED                 1
+#define SWBMISS_DISABLED                2
+#define SWBMISS_UPDATE_BEACON_RSSI      3
+#define SWBMISS_CHECK_RSSI_OUTLIER      4
+#define SWBMISS_TIMER_SET               5
+#define SWBMISS_DBGID_DEFINITION_END    6
+
+/* WLAN module DBGIDS */
+#define ROAM_DBGID_DEFINITION_START 0
+#define ROAM_MODULE_INIT           1
+#define ROAM_DEV_START             2
+#define ROAM_CONFIG_RSSI_THRESH    3
+#define ROAM_CONFIG_SCAN_PERIOD    4
+#define ROAM_CONFIG_AP_PROFILE     5
+#define ROAM_CONFIG_CHAN_LIST      6
+#define ROAM_CONFIG_SCAN_PARAMS    7
+#define ROAM_CONFIG_RSSI_CHANGE    8
+#define ROAM_SCAN_TIMER_START      9
+#define ROAM_SCAN_TIMER_EXPIRE    10
+#define ROAM_SCAN_TIMER_STOP      11
+#define ROAM_SCAN_STARTED         12
+#define ROAM_SCAN_COMPLETE        13
+#define ROAM_SCAN_CANCELLED       14
+#define ROAM_CANDIDATE_FOUND      15
+#define ROAM_RSSI_ACTIVE_SCAN     16
+#define ROAM_RSSI_ACTIVE_ROAM     17
+#define ROAM_RSSI_GOOD            18
+#define ROAM_BMISS_FIRST_RECV     19
+#define ROAM_DEV_STOP             20
+#define ROAM_FW_OFFLOAD_ENABLE    21
+#define ROAM_CANDIDATE_SSID_MATCH 22
+#define ROAM_CANDIDATE_SECURITY_MATCH 23
+#define ROAM_LOW_RSSI_INTERRUPT   24
+#define ROAM_HIGH_RSSI_INTERRUPT  25
+#define ROAM_SCAN_REQUESTED       26
+#define ROAM_BETTER_CANDIDATE_FOUND 27
+#define ROAM_BETTER_AP_EVENT 28
+#define ROAM_CANCEL_LOW_PRIO_SCAN 29
+#define ROAM_FINAL_BMISS_RECVD    30
+#define ROAM_CONFIG_SCAN_MODE     31
+#define ROAM_BMISS_FINAL_SCAN_ENABLE 32
+#define ROAM_SUITABLE_AP_EVENT    33
+#define ROAM_RSN_IE_PARSE_ERROR   34
+#define ROAM_WPA_IE_PARSE_ERROR   35
+#define ROAM_SCAN_CMD_FROM_HOST   36
+#define ROAM_HO_SORT_CANDIDATE    37
+#define ROAM_HO_SAVE_CANDIDATE    38
+#define ROAM_HO_GET_CANDIDATE     39
+#define ROAM_HO_OFFLOAD_SET_PARAM 40
+#define ROAM_HO_SM                41
+#define ROAM_HO_HTT_SAVED         42
+#define ROAM_HO_SYNC_START        43
+#define ROAM_HO_START             44
+#define ROAM_HO_SYNC_COMPLETE     45
+#define ROAM_HO_STOP              46
+#define ROAM_HO_HTT_FORWARD       47
+#define ROAM_CONFIG_SCAN_PARAMS_1 48
+#define ROAM_SCAN_COMPLETE_1      49
+#define ROAM_SWBMISS_BCN_RECV_VAL 50
+#define ROAM_SWBMISS_BCN_RECV_THRE2 51
+#define ROAM_SCAN_REQUESTED_1     52
+#define ROAM_HO_SORT_CANDIDATE_CUR  53
+#define ROAM_HO_SAVE_CANDIDATE_DUP  54
+#define ROAM_HO_SM_EVENT          55
+#define ROAM_HO_ENTER_CH          56
+#define ROAM_HO_MGMT_RX           57
+#define ROAM_HO_CANDIDATE_INFO    58
+#define ROAM_HO_OFFLD_DATA_STORE  59
+#define ROAM_HO_HTT_DATA_STORE    60
+#define ROAM_HO_UPDATE_STATUS     61
+#define ROAM_HO_OCS_CH_CB         62
+#define ROAM_RSSI_INTERRUPT_STATE 63
+#define ROAM_INVOKE_PARAM_CHECK   64
+#define ROAM_INVOKE_PARAM_CHAN    65
+#define ROAM_INVOKE_PARAM_BSSID   66
+#define ROAM_INVOKE_STATE_CHECK   67
+#define ROAM_INVOKE_START_SUCCESS 68
+#define ROAM_INVOKE_START_FAILURE 69
+#define ROAM_INVOKE_BSSID_CHECK   70
+#define ROAM_CANDIDATE_INFO       71
+#define ROAM_CANDIDATE_FILTER_MATCH 72
+#define ROAM_CANDIDATE_RSSI_ADJUST  73
+#define ROAM_CONFIG_ROAM_FILTER     74
+#define ROAM_EXTENDED_RSSI_TRESHOLD_1 75
+#define ROAM_EXTENDED_RSSI_TRESHOLD_2 76
+#define ROAM_BLACKLIST_BSSID        77
+#define ROAM_WHITELIST_SSID         78
+#define ROAM_WHITELIST_SSID_2       79
+#define ROAM_PREFERRED_BSSID        80
+#define ROAM_PREFERRED_FACTOR       81
+#define ROAM_SCAN_HIRSSI_THRESHOLD      82
+#define ROAM_SCAN_HIRSSI_CHECK          83
+#define ROAM_SCAN_HIRSSI_TIMER_EXPIRED  84
+#define ROAM_SCAN_EXTSCAN_CHECK         85
+#define ROAM_STA_KICKOUT_RECV           86
+#define ROAM_DBGID_DEFINITION_END       87
+
+/* DATA_TXRX module DBGIDs*/
+#define DATA_TXRX_DBGID_DEFINITION_START         0
+#define DATA_TXRX_DBGID_RX_DATA_SEQ_LEN_INFO     1
+#define DATA_TXRX_DBGID_REPLAY_CHECK             2
+#define DATA_TXRX_DBGID_DUP_CHECK                3
+#define DATA_TXRX_INVALID_PEER_AST_STA           4
+#define DATA_TXRX_INVALID_PEER_AST_P2P           5
+#define DATA_TXRX_INVALID_ADDR1_STA              6
+#define DATA_TXRX_INVALID_ADDR1_P2P              7
+#define DATA_TXRX_MULTICAST_BROADCAST_FRAME      8
+#define DATA_TXRX_INVALID_FRAME_CTRL_OR_ADDR     9
+#define DATA_TXRX_DBGID_DEFINITION_END          10
+
+/* HTT module DBGIDs */
+#define HTT_DBGID_DEFINITION_START               0
+#define HTT_DBGID_INVALID_VDEVID_OR_GROUP        1
+#define HTT_DBGID_DISCARD_INTERNAL_PKTS          2
+#define HTT_DBGID_DISCARD_TX_PKTS                3
+#define HTT_DBGID_GROUP_CHANGE                   4
+#define HTT_DBGID_GROUP_CREDIT_STATS             5
+#define HTT_DBGID_DISCARD_INTERNAL_PKTS_NUM      6
+#define HTT_DBGID_DEFINITION_END                 7
+
+/* TDLS module DBGIDs*/
+#define TDLS_DBGID_DEFINITION_START             0
+#define TDLS_DBGID_VDEV_CREATE                  1
+#define TDLS_DBGID_VDEV_DELETE                  2
+#define TDLS_DBGID_ENABLED_PASSIVE              3
+#define TDLS_DBGID_ENABLED_ACTIVE               4
+#define TDLS_DBGID_DISABLED                     5
+#define TDLS_DBGID_CONNTRACK_TIMER              6
+#define TDLS_DBGID_WAL_SET                      7
+#define TDLS_DBGID_WAL_GET                      8
+#define TDLS_DBGID_WAL_PEER_UPDATE_SET          9
+#define TDLS_DBGID_WAL_PEER_UPDATE_EVT         10
+#define TDLS_DBGID_WAL_VDEV_CREATE             11
+#define TDLS_DBGID_WAL_VDEV_DELETE             12
+#define TDLS_DBGID_WLAN_EVENT                  13
+#define TDLS_DBGID_WLAN_PEER_UPDATE_SET        14
+#define TDLS_DBGID_PEER_EVT_DRP_THRESH         15
+#define TDLS_DBGID_PEER_EVT_DRP_RATE           16
+#define TDLS_DBGID_PEER_EVT_DRP_RSSI           17
+#define TDLS_DBGID_PEER_EVT_DISCOVER           18
+#define TDLS_DBGID_PEER_EVT_DELETE             19
+#define TDLS_DBGID_PEER_CAP_UPDATE             20
+#define TDLS_DBGID_UAPSD_SEND_PTI_FRAME        21
+#define TDLS_DBGID_UAPSD_SEND_PTI_FRAME2PEER   22
+#define TDLS_DBGID_UAPSD_START_PTR_TIMER       23
+#define TDLS_DBGID_UAPSD_CANCEL_PTR_TIMER      24
+#define TDLS_DBGID_UAPSD_PTR_TIMER_TIMEOUT     25
+#define TDLS_DBGID_UAPSD_STA_PS_EVENT_HANDLER  26
+#define TDLS_DBGID_UAPSD_PEER_EVENT_HANDLER    27
+#define TDLS_DBGID_UAPSD_PS_DEFAULT_SETTINGS   28
+#define TDLS_DBGID_UAPSD_GENERIC               29
+
+/* TXBF Module IDs */
+#define TXBFEE_DBGID_START                      0
+#define TXBFEE_DBGID_NDPA_RECEIVED              1
+#define TXBFEE_DBGID_HOST_CONFIG_TXBFEE_TYPE    2
+#define TXBFER_DBGID_SEND_NDPA                  3
+#define TXBFER_DBGID_GET_NDPA_BUF_FAIL          4
+#define TXBFER_DBGID_SEND_NDPA_FAIL             5
+#define TXBFER_DBGID_GET_NDP_BUF_FAIL           6
+#define TXBFER_DBGID_SEND_NDP_FAIL              7
+#define TXBFER_DBGID_GET_BRPOLL_BUF_FAIL        8
+#define TXBFER_DBGID_SEND_BRPOLL_FAIL           9
+#define TXBFER_DBGID_HOST_CONFIG_CMDID         10
+#define TXBFEE_DBGID_HOST_CONFIG_CMDID         11
+#define TXBFEE_DBGID_ENABLE_UPLOAD_H           12
+#define TXBFEE_DBGID_UPLOADH_CV_TAG            13
+#define TXBFEE_DBGID_UPLOADH_H_TAG             14
+#define TXBFEE_DBGID_CAPTUREH_RECEIVED         15
+#define TXBFEE_DBGID_PACKET_IS_STEERED         16
+#define TXBFEE_UPLOADH_EVENT_ALLOC_MEM_FAIL    17
+#define TXBFEE_DBGID_SW_WAR_AID_ZERO           18
+#define TXBFEE_DBGID_BRPOLL_RECEIVED           19
+#define TXBFEE_DBGID_GID_RECEIVED              20
+#define TXBFEE_DBGID_END                       21
+
+/* SMPS module DBGIDs */
+#define STA_SMPS_DBGID_DEFINITION_START                 0
+#define STA_SMPS_DBGID_CREATE_PDEV_INSTANCE             1
+#define STA_SMPS_DBGID_CREATE_VIRTUAL_CHAN_INSTANCE     2
+#define STA_SMPS_DBGID_DELETE_VIRTUAL_CHAN_INSTANCE     3
+#define STA_SMPS_DBGID_CREATE_STA_INSTANCE              4
+#define STA_SMPS_DBGID_DELETE_STA_INSTANCE              5
+#define STA_SMPS_DBGID_VIRTUAL_CHAN_SMPS_START          6
+#define STA_SMPS_DBGID_VIRTUAL_CHAN_SMPS_STOP           7
+#define STA_SMPS_DBGID_SEND_SMPS_ACTION_FRAME           8
+#define STA_SMPS_DBGID_HOST_FORCED_MODE                 9
+#define STA_SMPS_DBGID_FW_FORCED_MODE                   10
+#define STA_SMPS_DBGID_RSSI_THRESHOLD_CROSSED           11
+#define STA_SMPS_DBGID_SMPS_ACTION_FRAME_COMPLETION     12
+#define STA_SMPS_DBGID_DTIM_EBT_EVENT_CHMASK_UPDATE     13
+#define STA_SMPS_DBGID_DTIM_CHMASK_UPDATE               14
+#define STA_SMPS_DBGID_DTIM_BEACON_EVENT_CHMASK_UPDATE  15
+#define STA_SMPS_DBGID_DTIM_POWER_STATE_CHANGE          16
+#define STA_SMPS_DBGID_DTIM_CHMASK_UPDATE_SLEEP         17
+#define STA_SMPS_DBGID_DTIM_CHMASK_UPDATE_AWAKE         18
+
+#define STA_SMPS_DBGID_DEFINITION_END                   18
+
+/* RTT module DBGIDs*/
+#define RTT_CALL_FLOW                 0
+#define RTT_REQ_SUB_TYPE              1
+#define RTT_MEAS_REQ_HEAD             2
+#define RTT_MEAS_REQ_BODY             3
+#define RTT_INIT_GLOBAL_STATE         6
+#define RTT_REPORT                    8
+#define RTT_ERROR_REPORT              10
+#define RTT_TIMER_STOP                11
+#define RTT_SEND_TM_FRAME             12
+#define RTT_V3_RESP_CNT               13
+#define RTT_V3_RESP_FINISH            14
+#define RTT_CHANNEL_SWITCH_REQ        15
+#define RTT_CHANNEL_SWITCH_GRANT      16
+#define RTT_CHANNEL_SWITCH_COMPLETE   17
+#define RTT_CHANNEL_SWITCH_PREEMPT    18
+#define RTT_CHANNEL_SWITCH_STOP       19
+#define RTT_TIMER_START               20
+#define RTT_FTM_PARAM_INFO            21
+#define RTT_RX_TM_FRAME               22
+#define RTT_INITR_TSTAMP              23
+#define RTT_RSPDR_TSTAMP              24
+#define RTT_TX_COMP_STATUS            25
+#define RTT_ERROR_WMI_EVENT           26
+#define RTT_MEASUREMENT_VALUES        27
+
+/* WLAN HB module DBGIDs */
+#define WLAN_HB_DBGID_DEFINITION_START                  0
+#define WLAN_HB_DBGID_INIT                              1
+#define WLAN_HB_DBGID_TCP_GET_TXBUF_FAIL                2
+#define WLAN_HB_DBGID_TCP_SEND_FAIL                     3
+#define WLAN_HB_DBGID_BSS_PEER_NULL                     4
+#define WLAN_HB_DBGID_UDP_GET_TXBUF_FAIL                5
+#define WLAN_HB_DBGID_UDP_SEND_FAIL                     6
+#define WLAN_HB_DBGID_WMI_CMD_INVALID_PARAM             7
+#define WLAN_HB_DBGID_WMI_CMD_INVALID_OP                8
+#define WLAN_HB_DBGID_WOW_NOT_ENTERED                   9
+#define WLAN_HB_DBGID_ALLOC_SESS_FAIL                   10
+#define WLAN_HB_DBGID_CTX_NULL                          11
+#define WLAN_HB_DBGID_CHKSUM_ERR                        12
+#define WLAN_HB_DBGID_UDP_TX                            13
+#define WLAN_HB_DBGID_TCP_TX                            14
+#define WLAN_HB_DBGID_DEFINITION_END                    15
+
+/* Thermal Manager DBGIDs*/
+#define THERMAL_MGR_DBGID_DEFINITION_START   0
+#define THERMAL_MGR_NEW_THRESH               1
+#define THERMAL_MGR_THRESH_CROSSED           2
+#define THERMAL_MGR_DBGID_DEFINITION_END     3
+
+/* WLAN PHYERR DFS(parse/filter) DBGIDs */
+#define WLAN_PHYERR_DFS_DBGID_DEFINITION_START    0
+#define WLAN_PHYERR_DFS_PHYERR_INFO_CHAN_BUFLEN   1
+#define WLAN_PHYERR_DFS_PHYERR_INFO_PPDU          2
+#define WLAN_PHYERR_DFS_DBDID_RADAR_SUMMARY       3
+#define WLAN_PHYERR_DFS_DBDID_SEARCH_FFT          4
+#define WLAN_PHTERR_DFS_DBDID_FILTER_STATUS       5
+#define WLAN_PHYERR_DFS_DBGID_DEFINITION_END      6
+
+/* RMC DBGIDs*/
+#define RMC_DBGID_DEFINITION_START             0
+#define RMC_CREATE_INSTANCE                    1
+#define RMC_DELETE_INSTANCE                    2
+#define RMC_LDR_SEL                            3
+#define RMC_NO_LDR                             4
+#define RMC_LDR_NOT_SEL                        5
+#define RMC_LDR_INF_SENT                       6
+#define RMC_PEER_ADD                           7
+#define RMC_PEER_DELETE                        8
+#define RMC_PEER_UNKNOWN                       9
+#define RMC_SET_MODE                           10
+#define RMC_SET_ACTION_PERIOD                  11
+#define RMC_ACTION_FRAME_RX                    12
+#define RMC_WAL_EVENT_HANDLER                  13
+#define RMC_BLACKLIST_PEER                     14
+#define RMC_WHITELIST_PEER                     15
+#define RMC_PEER_BCN_INFO                      16
+#define RMC_DBGID_DEFINITION_END               17
+
+/* UNIT_TEST module DBGIDs */
+#define UNIT_TEST_GEN                 0
+
+/* MLME module DBGIDs */
+#define MLME_DEBUG_CMN                0
+#define MLME_DEBUG_IF                 1
+#define MLME_DEBUG_AUTH               2
+#define MLME_DEBUG_REASSOC            3
+#define MLME_DEBUG_DEAUTH             4
+#define MLME_DEBUG_DISASSOC           5
+#define MLME_DEBUG_ROAM               6
+#define MLME_DEBUG_RETRY              7
+#define MLME_DEBUG_TIMER              8
+#define MLME_DEBUG_FRAMEPARSE         9
+
+/* SUPPL module DBGIDs */
+#define SUPPL_DBGID_INIT                        0
+#define SUPPL_DBGID_RECV_EAPOL                  1
+#define SUPPL_DBGID_RECV_EAPOL_TIMEOUT          2
+#define SUPPL_DBGID_SEND_EAPOL                  3
+#define SUPPL_DBGID_MIC_MISMATCH                4
+#define SUPPL_DBGID_FINISH                      5
+#define SUPPL_DBGID_GET_FRM_INFO                6
+#define SUPPL_DBGID_DUMP_TYPE                   7
+#define SUPPL_DBGID_DUMP_HEX                    8
+#define SUPPL_DBGID_NODE_NOT_FOUND              9
+#define SUPPL_DBGID_GET_EAPOL_BUF               10
+#define SUPPL_DBGID_GET_BUF_FAIL                11
+#define SUPPL_DBGID_RECV_EAPOL_ERROR            12
+
+/* Stats Module DBGIDs */
+#define WLAN_STATS_DBGID_DEFINITION_START                0
+#define WLAN_STATS_DBGID_EST_LINKSPEED_VDEV_EN_DIS       1
+#define WLAN_STATS_DBGID_EST_LINKSPEED_CHAN_TIME_START   2
+#define WLAN_STATS_DBGID_EST_LINKSPEED_CHAN_TIME_END     3
+#define WLAN_STATS_DBGID_EST_LINKSPEED_CALC              4
+#define WLAN_STATS_DBGID_EST_LINKSPEED_UPDATE_HOME_CHAN  5
+#define WLAN_STATS_DBGID_RSSI                            6
+#define WLAN_STATS_DBGID_CNE_RSSI                        7
+#define WLAN_STATS_DBGID_DEFINITION_END                  8
+
+/* NAN DBGIDs */
+#define NAN_DBGID_START                             0
+
+/* Debug IDs for debug logs. 3 args max, not fixed. */
+#define NAN_DBGID_DBG_LOG_FIRST                     1
+#define NAN_DBGID_FUNC_BEGIN                        NAN_DBGID_DBG_LOG_FIRST
+#define NAN_DBGID_FUNC_END                          2
+#define NAN_DBGID_MAIN_DEBUG                        3
+#define NAN_DBGID_MAC_DEBUG                         4
+#define NAN_DBGID_BLOOM_FILTER_DEBUG                5
+#define NAN_DBGID_MAC_ADDR                          6
+#define NAN_DBGID_PARAM_UPDATED                     7
+#define NAN_DBGID_NULL_PTR                          8
+#define NAN_DBGID_INVALID_FUNC_ARG                  9
+#define NAN_DBGID_INVALID_MSG_PARAM                 10
+#define NAN_DBGID_MISSING_MSG_PARAM                 11
+#define NAN_DBGID_DEPRECATED_MSG_PARAM              12
+#define NAN_DBGID_UNSUPPORTED_MSG_PARAM             13
+#define NAN_DBGID_INVALID_PKT_DATA                  14
+#define NAN_DBGID_LOG_PKT_DATA                      15
+#define NAN_DBGID_INVALID_VALUE                     16
+#define NAN_DBGID_INVALID_OPERATION                 17
+#define NAN_DBGID_INVALID_STATE                     18
+#define NAN_DBGID_FUNCTION_ENABLED                  19
+#define NAN_DBGID_FUNCTION_DISABLED                 20
+#define NAN_DBGID_INVALID_FUNCTION_STATE            21
+#define NAN_DBGID_READ_ERROR                        22
+#define NAN_DBGID_WRITE_ERROR                       23
+#define NAN_DBGID_RECEIVE_ERROR                     24
+#define NAN_DBGID_TRANSMIT_ERROR                    25
+#define NAN_DBGID_PARSE_ERROR                       26
+#define NAN_DBGID_RES_ALLOC_ERROR                   27
+/* PLEASE KEEP THIS ONE AT THE END */
+#define NAN_DBGID_DBG_LOG_LAST                      28
+
+/* Debug IDs for event logs. */
+
+#define NAN_DBGID_EVT_BASE                          NAN_DBGID_DBG_LOG_LAST
+/* args: <none> */
+#define NAN_DBGID_NAN_ENABLED                       (NAN_DBGID_EVT_BASE + 0)
+/* args: <none> */
+#define NAN_DBGID_NAN_DISABLED                      (NAN_DBGID_EVT_BASE + 1)
+/* args: <none> */
+#define NAN_DBGID_CONFIG_RESTORED                   (NAN_DBGID_EVT_BASE + 2)
+/* args: framesQueued */
+#define NAN_DBGID_SDF_QUEUED                        (NAN_DBGID_EVT_BASE + 3)
+/* args: old, new */
+#define NAN_DBGID_TW_CHANGED                        (NAN_DBGID_EVT_BASE + 4)
+/* args: <none> */
+#define NAN_DBGID_DW_START                          (NAN_DBGID_EVT_BASE + 5)
+/* args: busyDiff */
+#define NAN_DBGID_DW_END                            (NAN_DBGID_EVT_BASE + 6)
+/* args: oldClusterId, newClusterId */
+#define NAN_DBGID_CLUSTER_ID_CHANGED                (NAN_DBGID_EVT_BASE + 7)
+/* args: cmd, buffer, length */
+#define NAN_DBGID_WMI_CMD_RECEIVED                  (NAN_DBGID_EVT_BASE + 8)
+/* args: pEventPkt, pEventBuf, eventSize, dataSize */
+#define NAN_DBGID_WMI_EVT_SENT                      (NAN_DBGID_EVT_BASE + 9)
+/* args: type length, readLen */
+#define NAN_DBGID_TLV_READ                          (NAN_DBGID_EVT_BASE + 10)
+/* args: type length, writeLen */
+#define NAN_DBGID_TLV_WRITE                         (NAN_DBGID_EVT_BASE + 11)
+/* args: handle */
+#define NAN_DBGID_PUBSUB_UPDATED                    (NAN_DBGID_EVT_BASE + 12)
+/* args: handle */
+#define NAN_DBGID_PUBSUB_REMOVE_DEFERED             (NAN_DBGID_EVT_BASE + 13)
+/* args: handle */
+#define NAN_DBGID_PUBSUB_REMOVE_PENDING             (NAN_DBGID_EVT_BASE + 14)
+/* args: handle */
+#define NAN_DBGID_PUBSUB_REMOVED                    (NAN_DBGID_EVT_BASE + 15)
+/* args: handle */
+#define NAN_DBGID_PUBSUB_PROCESSED                  (NAN_DBGID_EVT_BASE + 16)
+/* args: handle, sid1, sid2, svcCtrl, length */
+#define NAN_DBGID_PUBSUB_MATCHED                    (NAN_DBGID_EVT_BASE + 17)
+/* args: handle, flags */
+#define NAN_DBGID_PUBSUB_PREPARED                   (NAN_DBGID_EVT_BASE + 18)
+/* args: handle, mac1, mac2 */
+#define NAN_DBGID_PUBSUB_FOLLOWUP_TRANSMIT          (NAN_DBGID_EVT_BASE + 19)
+/* args: handle, mac1, mac2 */
+#define NAN_DBGID_PUBSUB_FOLLOWUP_RECEIVED          (NAN_DBGID_EVT_BASE + 20)
+/* args: subscribeHandle, matchHandle, oldTimeout, newTimeout */
+#define NAN_DBGID_SUBSCRIBE_UNMATCH_TIMEOUT_UPDATE  (NAN_DBGID_EVT_BASE + 21)
+/* args: subscribeHandle, matchHandle, timestamp*/
+#define NAN_DBGID_SUBSCRIBE_MATCH_NEW               (NAN_DBGID_EVT_BASE + 22)
+/* args: subscribeHandle, matchHandle, timestamp*/
+#define NAN_DBGID_SUBSCRIBE_MATCH_REPEAT            (NAN_DBGID_EVT_BASE + 23)
+/* args: subscribeHandle, matchHandle, matchTimestamp, timestamp*/
+#define NAN_DBGID_SUBSCRIBE_MATCH_EXPIRED           (NAN_DBGID_EVT_BASE + 24)
+/* args: subscribeHandle, matchHandle, matchTimestamp, timestamp */
+#define NAN_DBGID_SUBSCRIBE_MATCH_LOG               (NAN_DBGID_EVT_BASE + 25)
+/* args: sid1, sid2 */
+#define NAN_DBGID_SERVICE_ID_CREATED                (NAN_DBGID_EVT_BASE + 26)
+/* args: size */
+#define NAN_DBGID_SD_ATTR_BUILT                     (NAN_DBGID_EVT_BASE + 27)
+/* args: offset */
+#define NAN_DBGID_SERVICE_RSP_OFFSET                (NAN_DBGID_EVT_BASE + 28)
+/* args: offset */
+#define NAN_DBGID_SERVICE_INFO_OFFSET               (NAN_DBGID_EVT_BASE + 29)
+/* args: chan, interval, start_time */
+#define NAN_DBGID_CHREQ_CREATE                      (NAN_DBGID_EVT_BASE + 30)
+/* args: start_time, status */
+#define NAN_DBGID_CHREQ_UPDATE                      (NAN_DBGID_EVT_BASE + 31)
+/* args: chan, interval, status */
+#define NAN_DBGID_CHREQ_REMOVE                      (NAN_DBGID_EVT_BASE + 32)
+/* args: type, timestamp */
+#define NAN_DBGID_CHREQ_GRANT                       (NAN_DBGID_EVT_BASE + 33)
+/* args: type, timestamp */
+#define NAN_DBGID_CHREQ_END                         (NAN_DBGID_EVT_BASE + 34)
+/* args: type, timestamp */
+#define NAN_DBGID_CHREQ_ERROR                       (NAN_DBGID_EVT_BASE + 35)
+/* args: type, length, timestamp, rssi */
+#define NAN_DBGID_RX_CALLBACK                       (NAN_DBGID_EVT_BASE + 36)
+/* args: type, handle, bufp, status, timestamp  */
+#define NAN_DBGID_TX_COMPLETE                       (NAN_DBGID_EVT_BASE + 37)
+/* args: tsf, tsf */
+#define NAN_DBGID_TSF_TIMEOUT                       (NAN_DBGID_EVT_BASE + 38)
+/* args: clusterId, clusterStart */
+#define NAN_DBGID_SYNC_START                        (NAN_DBGID_EVT_BASE + 39)
+/* args: clusterId */
+#define NAN_DBGID_SYNC_STOP                         (NAN_DBGID_EVT_BASE + 40)
+/* args: enable, scanType, rval */
+#define NAN_DBGID_NAN_SCAN                          (NAN_DBGID_EVT_BASE + 41)
+/* args: scanType */
+#define NAN_DBGID_NAN_SCAN_COMPLETE                 (NAN_DBGID_EVT_BASE + 42)
+/* args: masterPref */
+#define NAN_DBGID_MPREF_CHANGE                      (NAN_DBGID_EVT_BASE + 43)
+/* args: masterPref, randFactor */
+#define NAN_DBGID_WARMUP_EXPIRE                     (NAN_DBGID_EVT_BASE + 44)
+/* args: randFactor */
+#define NAN_DBGID_RANDOM_FACTOR_EXPIRE              (NAN_DBGID_EVT_BASE + 45)
+/* args: tsf, tsf */
+#define NAN_DBGID_DW_SKIP                           (NAN_DBGID_EVT_BASE + 46)
+/* args: type, tsfDiff */
+#define NAN_DBGID_DB_SKIP                           (NAN_DBGID_EVT_BASE + 47)
+/* args: TBD */
+#define NAN_DBGID_BEACON_RX                         (NAN_DBGID_EVT_BASE + 48)
+/* args: TBD */
+#define NAN_DBGID_BEACON_TX                         (NAN_DBGID_EVT_BASE + 49)
+/* args: clusterId */
+#define NAN_DBGID_CLUSTER_MERGE                     (NAN_DBGID_EVT_BASE + 50)
+/* args: cmd, status, value */
+#define NAN_DBGID_TEST_CMD_EXEC                     (NAN_DBGID_EVT_BASE + 51)
+/* args: tsfHi, tsfLo, age */
+#define NAN_DBGID_APPLY_BEACON_TSF                  (NAN_DBGID_EVT_BASE + 52)
+/* args: behindFlag, diff */
+#define NAN_DBGID_TSF_UPDATE                        (NAN_DBGID_EVT_BASE + 53)
+/* args: argc==4 (rawTsfHi, rawTsfLo, nanTsfHi, nanTsfLo), argc==2(offsetHi, offsetLo) */
+#define NAN_DBGID_SET_TSF                           (NAN_DBGID_EVT_BASE + 54)
+/* args: rankHi, rankLo, mp, rf */
+#define NAN_DBGID_NEW_MASTERRANK                    (NAN_DBGID_EVT_BASE + 55)
+/* args: amRankHi, amRankLo, mp, rf */
+#define NAN_DBGID_NEW_ANCHORMASTER                  (NAN_DBGID_EVT_BASE + 56)
+/* args: amRankHi, amRankLo, HC, BTT */
+#define NAN_DBGID_ANCHORMASTER_RECORD_UPDATE        (NAN_DBGID_EVT_BASE + 57)
+/* args: amRankHi, amRankLo, HC, BTT */
+#define NAN_DBGID_ANCHORMASTER_RECORD_EXPIRED       (NAN_DBGID_EVT_BASE + 58)
+/* args: reason, transitionsToAM */
+#define NAN_DBGID_BECOMING_ANCHORMASTER             (NAN_DBGID_EVT_BASE + 59)
+/* args: oldRole, newRole */
+#define NAN_DBGID_ROLE_CHANGE                       (NAN_DBGID_EVT_BASE + 60)
+/* args: TBD */
+#define NAN_DBGID_SYNC_BEACON_DW_STATS              (NAN_DBGID_EVT_BASE + 61)
+/* args: attrId */
+#define NAN_DBGID_RX_UNSUPPORTED_SDF_ATTR_ID        (NAN_DBGID_EVT_BASE + 62)
+/* args: handle, sid1, sid2, svcCtrl, length */
+#define NAN_DBGID_PUBSUB_MATCHED_SKIPPED_SSI        (NAN_DBGID_EVT_BASE + 63)
+/* args: offset */
+#define NAN_DBGID_MATCH_FILTER_OFFSET               (NAN_DBGID_EVT_BASE + 64)
+/* args: twSize, n, twIndex */
+#define NAN_DBGID_TW_PARAMS                         (NAN_DBGID_EVT_BASE + 65)
+/* args: */
+#define NAN_DBGID_BEACON_SENDER                     (NAN_DBGID_EVT_BASE + 66)
+/* args: currTsf, nextDwTsf */
+#define NAN_DBGID_TSF_DUMP                          (NAN_DBGID_EVT_BASE + 67)
+/* args: chan, startSlot, numSlots, repeat */
+#define NAN_DBGID_FAW_CONFIG                        (NAN_DBGID_EVT_BASE + 68)
+/* args: */
+#define NAN_DBGID_FAW_START                         (NAN_DBGID_EVT_BASE + 69)
+/* args: */
+#define NAN_DBGID_FAW_END                           (NAN_DBGID_EVT_BASE + 70)
+/* args: offset, oldval, newval */
+#define NAN_DBGID_CONFIG_PARAM_CHANGED              (NAN_DBGID_EVT_BASE + 71)
+/* args: <none> */
+#define NAN_DBGID_CONN_CAP_ATTR_CLEARED             (NAN_DBGID_EVT_BASE + 72)
+/* args: connType */
+#define NAN_DBGID_POST_DISC_ATTR_CLEARED            (NAN_DBGID_EVT_BASE + 73)
+/* args: <none> */
+#define NAN_DBGID_VENDOR_SPECIFIC_ATTR_CLEARED      (NAN_DBGID_EVT_BASE + 74)
+/* args: offset */
+#define NAN_DBGID_WLAN_INFRA_MAP_CTRL_OFFSET        (NAN_DBGID_EVT_BASE + 75)
+/* args: offset */
+#define NAN_DBGID_WLAN_INFRA_AI_BITMAP_OFFSET       (NAN_DBGID_EVT_BASE + 76)
+/* args: offset */
+#define NAN_DBGID_WLAN_INFRA_DEVICE_ROLE_OFFSET     (NAN_DBGID_EVT_BASE + 77)
+/* args: offset */
+#define NAN_DBGID_MESH_ID_OFFSET                    (NAN_DBGID_EVT_BASE + 78)
+/* args: */
+#define NAN_DBGID_SPARE_79                          (NAN_DBGID_EVT_BASE + 79)
+/* args: */
+#define NAN_DBGID_SPARE_80                          (NAN_DBGID_EVT_BASE + 80)
+/* args: */
+#define NAN_DBGID_SPARE_81                          (NAN_DBGID_EVT_BASE + 81)
+/* args: */
+#define NAN_DBGID_SPARE_82                          (NAN_DBGID_EVT_BASE + 82)
+/* args: */
+#define NAN_DBGID_SPARE_83                          (NAN_DBGID_EVT_BASE + 83)
+/* PLEASE KEEP THIS ONE AT THE END */
+#define NAN_DBGID_EVT_LOG_LAST                      (NAN_DBGID_EVT_BASE + 84)
+
+/* Debug IDs for message logs. */
+#define NAN_DBGID_API_MSG_BASE                      NAN_DBGID_EVT_LOG_LAST
+#define NAN_DBGID_API_MSG_HEADER                    (NAN_DBGID_API_MSG_BASE + 0)
+#define NAN_DBGID_API_MSG_DATA                      (NAN_DBGID_API_MSG_BASE + 1)
+#define NAN_DBGID_API_MSG_LAST                      (NAN_DBGID_API_MSG_BASE + 2)
+
+/* Debug IDs for packet logs. */
+#define NAN_DBGID_OTA_PKT_BASE                      NAN_DBGID_API_MSG_LAST
+#define NAN_DBGID_OTA_PKT_HEADER                    (NAN_DBGID_OTA_PKT_BASE + 0)
+#define NAN_DBGID_OTA_PKT_DATA                      (NAN_DBGID_OTA_PKT_BASE + 1)
+#define NAN_DBGID_OTA_PKT_LAST                      (NAN_DBGID_OTA_PKT_BASE + 2) /*  not really the last! */
+
+#define NAN_DBGID_BEACON_RX_TIMES               (NAN_DBGID_OTA_PKT_LAST + 0)
+#define NAN_DBGID_BEACON_RX_MANDATORY_ATTRS     (NAN_DBGID_OTA_PKT_LAST + 1)
+#define NAN_DBGID_BEACON_RX_SID_ATTR            (NAN_DBGID_OTA_PKT_LAST + 2)
+#define NAN_DBGID_BEACON_RX_VSA_ATTR            (NAN_DBGID_OTA_PKT_LAST + 3)
+#define NAN_DBGID_BEACON_RX_AVG_RSSI            (NAN_DBGID_OTA_PKT_LAST + 4)
+#define NAN_DBGID_CANDIDATE_BEACONS             (NAN_DBGID_OTA_PKT_LAST + 5)
+#define NAN_DBGID_TSF_OFFSET                    (NAN_DBGID_OTA_PKT_LAST + 6)
+#define NAN_DBGID_ANCHORMASTER_RECORD_UPDATE_LAST       (NAN_DBGID_OTA_PKT_LAST + 7)
+#define NAN_DBGID_ANCHORMASTER_RECORD_EXPIRED2  (NAN_DBGID_OTA_PKT_LAST + 8)
+#define NAN_DBGID_BEACON_TX_SEND                (NAN_DBGID_OTA_PKT_LAST + 9)
+#define NAN_DBGID_BEACON_TX_CANCEL              (NAN_DBGID_OTA_PKT_LAST + 10)
+#define NAN_DBGID_NAN_SCAN_EVENT                (NAN_DBGID_OTA_PKT_LAST + 11)
+#define NAN_DBGID_NAN_SDF_QUEUED                (NAN_DBGID_OTA_PKT_LAST + 12)
+#define NAN_DBGID_NAN_BEACON_QUEUED             (NAN_DBGID_OTA_PKT_LAST + 13)
+#define NAN_DBGID_NAN_NOT_ALLOWED               (NAN_DBGID_OTA_PKT_LAST + 14)
+#define NAN_DBGID_NAN_TX_FOLLOWUP_REQ_TR_ID     (NAN_DBGID_OTA_PKT_LAST + 15)
+#define NAN_DBGID_NAN_TX_FOLLOWUP_RESP_TR_ID    (NAN_DBGID_OTA_PKT_LAST + 16)
+#define NAN_DBGID_PUBSUB_TERM_IND_DISABLE_FLAG  (NAN_DBGID_OTA_PKT_LAST + 17)
+#define NAN_DBGID_UNMATCH_IND_DISABLE_FLAG      (NAN_DBGID_OTA_PKT_LAST + 18)
+#define NAN_DBGID_FOLLOWUP_RX_IND_DISABLE_FLAG  (NAN_DBGID_OTA_PKT_LAST + 19)
+#define NAN_DBGID_BEACON_RX_LAST                (NAN_DBGID_OTA_PKT_LAST + 20)
+
+/* NaN Datapath Timekeeper debug IDs */
+#define NAN_DBGID_TMKR_BASE                        NAN_DBGID_BEACON_RX_LAST   /* 116 + 20 = 136 */
+#define NAN_DBGID_TMKR_INIT                        (NAN_DBGID_TMKR_BASE + 0)  /* 136 */
+#define NAN_DBGID_TMKR_OPEN                        (NAN_DBGID_TMKR_BASE + 1)  /* 137 */
+#define NAN_DBGID_TMKR_CLOSE                       (NAN_DBGID_TMKR_BASE + 2)  /* 138 */
+#define NAN_DBGID_TMKR_NEGOTIATE                   (NAN_DBGID_TMKR_BASE + 3)  /* 139 */
+#define NAN_DBGID_TMKR_TMR_HNDLR                   (NAN_DBGID_TMKR_BASE + 4)  /* 140 */
+#define NAN_DBGID_TMKR_UNITTEST                    (NAN_DBGID_TMKR_BASE + 5)  /* 141 */
+#define NAN_DBGID_TMKR_LF_TMR_HNDLR                (NAN_DBGID_TMKR_BASE + 6)  /* 142 */
+#define NAN_DBGID_TMKR_DEINIT                      (NAN_DBGID_TMKR_BASE + 7)  /* 143 */
+#define NAN_DBGID_TMKR_SLOTBITMAP                  (NAN_DBGID_TMKR_BASE + 8)  /* 144 */
+#define NAN_DBGID_TMKR_CANCEL_SLOTBITMAP           (NAN_DBGID_TMKR_BASE + 9)  /* 145 */
+#define NAN_DBGID_TMKR_CONFIRM_SLOTBITMAP          (NAN_DBGID_TMKR_BASE + 10) /* 146 */
+#define NAN_DBGID_TMKR_RESOLVE_SLOTBITMAP          (NAN_DBGID_TMKR_BASE + 11) /* 147 */
+#define NAN_DBGID_TMKR_ADD_CHAN_ELEMENT            (NAN_DBGID_TMKR_BASE + 12) /* 148 */
+#define NAN_DBGID_TMKR_REMOVE_CHAN_ELEMENT         (NAN_DBGID_TMKR_BASE + 13) /* 149 */
+#define NAN_DBGID_TMKR_FIND_CHAN_ELEMENT           (NAN_DBGID_TMKR_BASE + 14) /* 150 */
+#define NAN_DBGID_TMKR_QUERY_COMMITTED_SLOTBITMAP  (NAN_DBGID_TMKR_BASE + 15) /* 151 */
+#define NAN_DBGID_TMKR_ENCODE_SLOTBITMAP           (NAN_DBGID_TMKR_BASE + 16) /* 152 */
+#define NAN_DBGID_TMKR_SLOT_ARRAY_DBG              (NAN_DBGID_TMKR_BASE + 17) /* 153 */
+#define NAN_DBGID_TMKR_POPULATE_MASTER             (NAN_DBGID_TMKR_BASE + 18) /* 154 */
+#define NAN_DBGID_TMKR_ALLOCATE_SLOTS              (NAN_DBGID_TMKR_BASE + 19) /* 155 */
+#define NAN_DBGID_TMKR_RELEASE_SLOTS               (NAN_DBGID_TMKR_BASE + 20) /* 156 */
+#define NAN_DBGID_TMKR_ENABLE                      (NAN_DBGID_TMKR_BASE + 21) /* 157 */
+#define NAN_DBGID_TMKR_DISABLE                     (NAN_DBGID_TMKR_BASE + 22) /* 158 */
+#define NAN_DBGID_TMKR_GET_NEXT_SLOTWINDOW         (NAN_DBGID_TMKR_BASE + 23) /* 159 */
+#define NAN_DBGID_TMKR_RESUME_TIMEKEEPING          (NAN_DBGID_TMKR_BASE + 24) /* 160 */
+#define NAN_DBGID_TMKR_RESYNC_TO_DISCOVERY_WINDOW  (NAN_DBGID_TMKR_BASE + 25) /* 161 */
+#define NAN_DBGID_TMKR_SUSPEND_TIMEKEEPING         (NAN_DBGID_TMKR_BASE + 26) /* 162 */
+#define NAN_DBGID_TMKR_SYNC_TO_DISCOVERY_WINDOW    (NAN_DBGID_TMKR_BASE + 27) /* 163 */
+#define NAN_DBGID_TMKR_GET_NEXT_TSFTIME            (NAN_DBGID_TMKR_BASE + 28) /* 164 */
+#define NAN_DBGID_TMKR_SETUP_NEXT_INTERVAL         (NAN_DBGID_TMKR_BASE + 29) /* 165 */
+#define NAN_DBGID_TMKR_SCHEDULE_EVENT              (NAN_DBGID_TMKR_BASE + 30) /* 166 */
+#define NAN_DBGID_TMKR_ENABLE_TIMEKEEPING_EVENT    (NAN_DBGID_TMKR_BASE + 31) /* 167 */
+#define NAN_DBGID_TMKR_DISABLE_TIMEKEEPING_EVENT   (NAN_DBGID_TMKR_BASE + 32) /* 168 */
+#define NAN_DBGID_TMKR_SYNC_WITH_DW_EVENT          (NAN_DBGID_TMKR_BASE + 33) /* 169 */
+#define NAN_DBGID_TMKR_INTERVAL_EXPIRED_EVENT      (NAN_DBGID_TMKR_BASE + 34) /* 170 */
+#define NAN_DBGID_TMKR_PAUSE_TIMEKEEPING_EVENT     (NAN_DBGID_TMKR_BASE + 35) /* 171 */
+#define NAN_DBGID_TMKR_RESUME_TIMEKEEPING_EVENT    (NAN_DBGID_TMKR_BASE + 36) /* 172 */
+#define NAN_DBGID_TMKR_RESYNC_TO_DW_EVENT          (NAN_DBGID_TMKR_BASE + 37) /* 173 */
+#define NAN_DBGID_TMKR_LAST                        (NAN_DBGID_TMKR_BASE + 38) /* 174 */
+
+#define NAN_DBGID_END                              (NAN_DBGID_TMKR_LAST)
+
+/* IBSS PS module DBGIDs*/
+#define IBSS_PS_DBGID_DEFINITION_START           0
+#define IBSS_PS_DBGID_PEER_CREATE                1
+#define IBSS_PS_DBGID_PEER_DELETE                2
+#define IBSS_PS_DBGID_VDEV_CREATE                3
+#define IBSS_PS_DBGID_VDEV_DELETE                4
+#define IBSS_PS_DBGID_VDEV_EVENT                 5
+#define IBSS_PS_DBGID_PEER_EVENT                 6
+#define IBSS_PS_DBGID_DELIVER_CAB                7
+#define IBSS_PS_DBGID_DELIVER_UC_DATA            8
+#define IBSS_PS_DBGID_DELIVER_UC_DATA_ERROR      9
+#define IBSS_PS_DBGID_UC_INACTIVITY_TMR_RESTART 10
+#define IBSS_PS_DBGID_MC_INACTIVITY_TMR_RESTART 11
+#define IBSS_PS_DBGID_NULL_TX_COMPLETION        12
+#define IBSS_PS_DBGID_ATIM_TIMER_START          13
+#define IBSS_PS_DBGID_UC_ATIM_SEND              14
+#define IBSS_PS_DBGID_BC_ATIM_SEND              15
+#define IBSS_PS_DBGID_UC_TIMEOUT                16
+#define IBSS_PS_DBGID_PWR_COLLAPSE_ALLOWED      17
+#define IBSS_PS_DBGID_PWR_COLLAPSE_NOT_ALLOWED  18
+#define IBSS_PS_DBGID_SET_PARAM                 19
+#define IBSS_PS_DBGID_HOST_TX_PAUSE             20
+#define IBSS_PS_DBGID_HOST_TX_UNPAUSE           21
+#define IBSS_PS_DBGID_PS_DESC_BIN_HWM           22
+#define IBSS_PS_DBGID_PS_DESC_BIN_LWM           23
+#define IBSS_PS_DBGID_PS_KICKOUT_PEER           24
+#define IBSS_PS_DBGID_SET_PEER_PARAM            25
+#define IBSS_PS_DBGID_BCN_ATIM_WIN_MISMATCH     26
+#define IBSS_PS_DBGID_RX_CHAINMASK_CHANGE       27
+
+/* HIF UART Interface DBGIDs */
+#define HIF_UART_DBGID_START               0
+#define HIF_UART_DBGID_POWER_STATE         1
+#define HIF_UART_DBGID_TXRX_FLOW           2
+#define HIF_UART_DBGID_TXRX_CTRL_CHAR      3
+#define HIF_UART_DBGID_TXRX_BUF_DUMP       4
+
+/* EXTSCAN DBGIDs */
+#define EXTSCAN_START                                    0
+#define EXTSCAN_STOP                                     1
+#define EXTSCAN_CLEAR_ENTRY_CONTENT                      2
+#define EXTSCAN_GET_FREE_ENTRY_SUCCESS                   3
+#define EXTSCAN_GET_FREE_ENTRY_INCONSISTENT              4
+#define EXTSCAN_GET_FREE_ENTRY_NO_MORE_ENTRIES           5
+#define EXTSCAN_CREATE_ENTRY_SUCCESS                     6
+#define EXTSCAN_CREATE_ENTRY_ERROR                       7
+#define EXTSCAN_SEARCH_SCAN_ENTRY_QUEUE                  8
+#define EXTSCAN_SEARCH_SCAN_ENTRY_KEY_FOUND              9
+#define EXTSCAN_SEARCH_SCAN_ENTRY_KEY_NOT_FOUND         10
+#define EXTSCAN_ADD_ENTRY                               11
+#define EXTSCAN_BUCKET_SEND_OPERATION_EVENT             12
+#define EXTSCAN_BUCKET_SEND_OPERATION_EVENT_FAILED      13
+#define EXTSCAN_BUCKET_START_SCAN_CYCLE                 14
+#define EXTSCAN_BUCKET_PERIODIC_TIMER                   15
+#define EXTSCAN_SEND_START_STOP_EVENT                   16
+#define EXTSCAN_NOTIFY_WLAN_CHANGE                      17
+#define EXTSCAN_NOTIFY_WLAN_HOTLIST_MATCH               18
+#define EXTSCAN_MAIN_RECEIVED_FRAME                     19
+#define EXTSCAN_MAIN_NO_SSID_IE                         20
+#define EXTSCAN_MAIN_MALFORMED_FRAME                    21
+#define EXTSCAN_FIND_BSSID_BY_REFERENCE                 22
+#define EXTSCAN_FIND_BSSID_BY_REFERENCE_ERROR           23
+#define EXTSCAN_NOTIFY_TABLE_USAGE                      24
+#define EXTSCAN_FOUND_RSSI_ENTRY                        25
+#define EXTSCAN_BSSID_FOUND_RSSI_SAMPLE                 26
+#define EXTSCAN_BSSID_ADDED_RSSI_SAMPLE                 27
+#define EXTSCAN_BSSID_REPLACED_RSSI_SAMPLE              28
+#define EXTSCAN_BSSID_TRANSFER_CURRENT_SAMPLES          29
+#define EXTSCAN_BUCKET_PROCESS_SCAN_EVENT               30
+#define EXTSCAN_BUCKET_CANNOT_FIND_BUCKET               31
+#define EXTSCAN_START_SCAN_REQUEST_FAILED               32
+#define EXTSCAN_BUCKET_STOP_CURRENT_SCANS               33
+#define EXTSCAN_BUCKET_SCAN_STOP_REQUEST                34
+#define EXTSCAN_BUCKET_PERIODIC_TIMER_ERROR             35
+#define EXTSCAN_BUCKET_START_OPERATION                  36
+#define EXTSCAN_START_INTERNAL_ERROR                    37
+#define EXTSCAN_NOTIFY_HOTLIST_MATCH                    38
+#define EXTSCAN_CONFIG_HOTLIST_TABLE                    39
+#define EXTSCAN_CONFIG_WLAN_CHANGE_TABLE                40
+#define EXTSCAN_EVENT_SEND_FAILED                       41
+
+/* ERE DBGIDs */
+#define ERE_DBGID_DEFINITION_START                       0
+#define ERE_DBGID_VDEV_ATTACH                            1
+#define ERE_DBGID_VDEV_DETACH                            2
+#define ERE_DBGID_ENABLE_CMD                             3
+#define ERE_DBGID_STATUS_ENABLED                         4
+#define ERE_DBGID_STATUS_DISABLED                        5
+#define ERE_DBGID_ISROUTE_TABLE_EMPTY                    6
+#define ERE_DBGID_HASH_VALUE                             7
+#define ERE_DBGID_MATCH_REQ                              8
+#define ERE_DBGID_ADD_ROUTE_DBG                          9
+#define ERE_DBGID_ADD_ROUTE_ENTRY                       10
+#define ERE_DBGID_STATS_TX                              11
+#define ERE_DBGID_STATS_RX                              12
+#define ERE_DBGID_DEFINITION_END                        13
+/* IDs 14 - 251 reserved for ERE */
+/* Timekeeper debug IDs */
+#define TIMEKEEPER_INIT                                 252
+#define TIMEKEEPER_OPEN                                 253
+#define TIMEKEEPER_CLOSE                                254
+#define TIMEKEEPER_NEGOTIATE                            255
+#define TIMEKEEPER_TMR_HNDLR                            256
+#define TIMEKEEPER_UNITTEST                             257
+#define TIMEKEEPER_LF_TMR_HNDLR                         258
+#define TIMEKEEPER_DEINIT                               259
+#define TIMEKEEPER_SLOTBITMAP                           260
+#define TIMEKEEPER_CANCEL_SLOTBITMAP                    261
+#define TIMEKEEPER_CONFIRM_SLOTBITMAP                   262
+#define TIMEKEEPER_RESOLVE_SLOTBITMAP                   263
+#define TIMEKEEPER_ADD_CHAN_ELEMENT                     264
+#define TIMEKEEPER_REMOVE_CHAN_ELEMENT                  265
+#define TIMEKEEPER_FIND_CHAN_ELEMENT                    266
+#define TIMEKEEPER_QUERY_COMMITTED_SLOTBITMAP           267
+#define TIMEKEEPER_ENCODE_SLOTBITMAP                    268
+#define TIMEKEEPER_SLOT_ARRAY_DBG                       269
+#define TIMEKEEPER_POPULATE_MASTER                      270
+
+/* NLO DBGIDs */
+#define NLO_DBGID_SSID_TO_BE_SCANNED_LIST 0
+#define NLO_DBGID_SSID_TO_BE_SKIPPED_LIST 1
+
+/* Channel prediction/reduction DBGIDs */
+#define SCAN_CH_PREDICT_DBGID_DEFINITION_START          0
+#define SCAN_CH_PREDICT_CALCULATE                       1
+#define SCAN_CH_PREDICT_CALCULATE_SAMPLE                2
+#define SCAN_CH_PREDICT_CALCULATE_RESULT                3
+#define SCAN_CH_PREDICT_FOUND_BSS                       4
+#define SCAN_CH_PREDICT_SCAN_START                      5
+#define SCAN_CH_PREDICT_START                           6
+#define SCAN_CH_PREDICT_STOP                            7
+#define SCAN_CH_PREDICT_DBGID_DEFINITION_END            8
+
+/* DSRC DBGIDs */
+#define  OCB_DBGID_VDEV_CREATE                          0
+#define  OCB_DBGID_VDEV_DELETE                          1
+#define  OCB_DBGID_CHAN_PAUSE                           2
+#define  OCB_DBGID_CHAN_UNPAUSE                         3
+#define  OCB_DBGID_PEER_CREATE                          4
+#define  OCB_DBGID_PEER_DELETE                          5
+#define  OCB_DBGID_DCC_START                            6
+#define  OCB_DBGID_DCC_STOP                             7
+#define  OCB_DBGID_SET_CONFIG_CMD                       8
+#define  OCB_DBGID_SET_UTC_TIME_CMD                     9
+#define  OCB_DBGID_START_TIMING_ADVERT_CMD              10
+#define  OCB_DBGID_STOP_TIMING_ADVERT_CMD               11
+#define  OCB_DBGID_GET_TSF_TIMER_CMD                    12
+#define  OCB_DBGID_GET_DCC_STATS_CMD                    13
+#define  OCB_DBGID_UPDATE_DCC_NDL_CMD                   14
+#define  OCB_DBGID_SET_CONFIG_RESP_EVENT                15
+#define  OCB_DBGID_GET_TSF_TIMER_RESP_EVENT             16
+#define  OCB_DBGID_GET_DCC_STATS_RESP_EVENT             17
+#define  OCB_DBGID_DCC_STATS_EVENT                      18
+#define  OCB_UPDATE_DCC_NDL_RESP_EVENT                  19
+#define  OCB_DBGID_GENERIC                              20
+#define  OCB_DBGID_VDEV_START                           21
+#define  OCB_DBGID_CHANNEL_SCHED_EVENT                  22
+#define  OCB_DBGID_GPS_EVENT_START                      23
+#define  OCB_DBGID_GPS_EVENT_END                        24
+#define  OCB_DBGID_TX_TA_FRAME                          25
+#define  OCB_DBGID_RX_TA_FRAME                          26
+
+/* Up to 255 reserved for OCB debug IDs */
+
+#define  DCC_DBGID_START                                256
+#define  DCC_DBGID_STOP                                 257
+#define  DCC_DBGID_DCC_STATS_EVENT                      258
+#define  DCC_DBGID_SM_INIT                              259
+#define  DCC_DBGID_SM_EVENT                             260
+#define  DCC_DBGID_SM_CHANGE                            261
+#define  DCC_DBGID_GET_TX_ALLOWED                       262
+#define  DCC_DBGID_NOTIFY_TX_COMPLETION                 263
+#define  DCC_DBGID_NOTIFY_RX                            264
+#define  DCC_DBGID_GET_TX_POWER                         265
+#define  DCC_DBGID_GET_TX_RATE                          266
+#define  DCC_DBGID_TICKLE_SCHED                         267
+#define  DCC_DBGID_GENERIC                              268
+#define  DCC_DBGID_RX_PATH                              269
+#define  DCC_DBGID_TX_PATH                              270
+
+/* RSSI Threshold Monitor DBGIDs */
+#define RSSI_MONITOR_DBGID_DEFINITION_START               0
+#define RSSI_MONITOR_VDEV_INIT                            1
+#define RSSI_MONITOR_VDEV_FREE                            2
+#define RSSI_MONITOR_VDEV_EVENT                           3
+#define RSSI_MONITOR_HW_EVENT                             4
+#define RSSI_MONITOR_ENABLE_THRESHOLDS_CLIENT_REQ         5
+#define RSSI_MONITOR_ENABLE_THRESHOLDS_CLIENT_REQ_ERR     6
+#define RSSI_MONITOR_DISABLE_THRESHOLDS_CLIENT_REQ        7
+#define RSSI_MONITOR_DISABLE_THRESHOLDS_CLIENT_REQ_ERR    8
+#define RSSI_MONITOR_ARBITER                              9
+#define RSSI_MONITOR_ARBITER_CONFIG_HW                   10
+#define RSSI_MONITOR_CHECK_AND_DELIVER_EVENT             11
+#define RSSI_MONITOR_DELIVER_EVENT                       12
+#define RSSI_MONITOR_UPDATE_BEACON_RSSI                  13
+#define RSSI_MONITOR_DBGID_DEFINITION_END                14
+
+/* QBOOST DBGIDs */
+#define WLAN_MODULE_QBOOST_DEFINITION_START               0
+#define WLAN_MODULE_QBOOST_DBGID_WLAN_PEER_NOT_FOUND      1
+#define WLAN_MODULE_QBOOST_DEFINITION_END                 2
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_ID_H_ */
+

fw/htt.h

@@ -0,0 +1,9189 @@
+/*
+ * Copyright (c) 2011-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/**
+ * @file htt.h
+ *
+ * @details the public header file of HTT layer
+ */
+
+#ifndef _HTT_H_
+#define _HTT_H_
+
+#include <a_types.h>    /* A_UINT32 */
+#include <a_osapi.h>    /* PREPACK, POSTPACK */
+#ifdef ATHR_WIN_NWF
+#pragma warning(disable:4214) /* bit field types other than int */
+#endif
+#include "wlan_defs.h"
+#include <htt_common.h>
+
+/*
+ * Unless explicitly specified to use 64 bits to represent physical addresses
+ * (or more precisely, bus addresses), default to 32 bits.
+ */
+#ifndef HTT_PADDR64
+    #define HTT_PADDR64 0
+#endif
+
+#ifndef offsetof
+#define offsetof(type, field)   ((unsigned int)(&((type *)0)->field))
+#endif
+
+/*
+ * HTT version history:
+ * 1.0  initial numbered version
+ * 1.1  modifications to STATS messages.
+ *      These modifications are not backwards compatible, but since the
+ *      STATS messages themselves are non-essential (they are for debugging),
+ *      the 1.1 version of the HTT message library as a whole is compatible
+ *      with the 1.0 version.
+ * 1.2  reset mask IE added to STATS_REQ message
+ * 1.3  stat config IE added to STATS_REQ message
+ *----
+ * 2.0  FW rx PPDU desc added to RX_IND message
+ * 2.1  Enable msdu_ext/frag_desc banking change for WIFI2.0
+ *----
+ * 3.0  Remove HTT_H2T_MSG_TYPE_MGMT_TX message
+ * 3.1  Added HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND message
+ * 3.2  Added HTT_H2T_MSG_TYPE_WDI_IPA_CFG,
+ *            HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQUEST messages
+ * 3.3  Added HTT_H2T_MSG_TYPE_AGGR_CFG_EX message
+ * 3.4  Added tx_compl_req flag in HTT tx descriptor
+ * 3.5  Added flush and fail stats in rx_reorder stats structure
+ * 3.6  Added frag flag in HTT RX INORDER PADDR IND header
+ * 3.7  Made changes to support EOS Mac_core 3.0
+ * 3.8  Added txq_group information element definition;
+ *      added optional txq_group suffix to TX_CREDIT_UPDATE_IND message
+ * 3.9  Added HTT_T2H CHAN_CHANGE message;
+ *      Allow buffer addresses in bus-address format to be stored as
+ *      either 32 bits or 64 bits.
+ * 3.10 Add optional TLV extensions to the VERSION_REQ and VERSION_CONF
+ *      messages to specify which HTT options to use.
+ *      Initial TLV options cover:
+ *        - whether to use 32 or 64 bits to represent LL bus addresses
+ *        - whether to use TX_COMPL_IND or TX_CREDIT_UPDATE_IND in HL systems
+ *        - how many tx queue groups to use
+ * 3.11 Expand rx debug stats:
+ *        - Expand the rx_reorder_stats struct with stats about successful and
+ *          failed rx buffer allcoations.
+ *        - Add a new rx_remote_buffer_mgmt_stats struct with stats about
+ *          the supply, allocation, use, and recycling of rx buffers for the
+ *          "remote ring" of rx buffers in host member in LL systems.
+ *          Add RX_REMOTE_RING_BUFFER_INFO stats type for uploading these stats.
+ * 3.12 Add "rx offload packet error" message with initial "MIC error" subtype
+ * 3.13 Add constants + macros to support 64-bit address format for the
+ *      tx fragments descriptor, the rx ring buffer, and the rx ring
+ *      index shadow register.
+ * 3.14 Add a method for the host to provide detailed per-frame tx specs:
+ *        - Add htt_tx_msdu_desc_ext_t struct def.
+ *        - Add TLV to specify whether the target supports the HTT tx MSDU
+ *          extension descriptor.
+ *        - Change a reserved bit in the HTT tx MSDU descriptor to an
+ *          "extension" bit, to specify whether a HTT tx MSDU extension
+ *          descriptor is present.
+ * 3.15 Add HW rx desc info to per-MSDU info elems in RX_IN_ORD_PADDR_IND msg.
+ *      (This allows the host to obtain key information about the MSDU
+ *      from a memory location already in the cache, rather than taking a
+ *      cache miss for each MSDU by reading the HW rx descs.)
+ * 3.16 Add htt_pkt_type_eth2 and define pkt_subtype flags to indicate
+ *      whether a copy-engine classification result is appended to TX_FRM.
+ * 3.17 Add a version of the WDI_IPA_CFG message; add RX_RING2 to WDI_IPA_CFG
+ * 3.18 Add a PEER_DEL tx completion indication status, for HL cleanup of
+ *      tx frames in the target after the peer has already been deleted.
+ * 3.19 Add HTT_DBG_STATS_RX_RATE_INFO_V2 and HTT_DBG_STATS_TX_RATE_INFO_V2
+ * 3.20 Expand rx_reorder_stats.
+ * 3.21 Add optional rx channel spec to HL RX_IND.
+ * 3.22 Expand rx_reorder_stats
+ *      (distinguish duplicates within vs. outside block ack window)
+ * 3.23 Add HTT_T2H_MSG_TYPE_RATE_REPORT to report peer justified rate.
+ *      The justified rate is calculated by two steps. The first is to multiply
+ *      user-rate by (1 - PER) and the other is to smooth the step 1's result
+ *      by a low pass filter.
+ *      This change allows HL download scheduling to consider the WLAN rate
+ *      that will be used for transmitting the downloaded frames.
+ * 3.24 Expand rx_reorder_stats
+ *      (add counter for decrypt / MIC errors)
+ * 3.25 Expand rx_reorder_stats
+ *      (add counter of frames received into both local + remote rings)
+ * 3.26 Add stats struct for counting rx of tx BF, MU, SU, and NDPA frames
+ *      (HTT_DBG_STATS_TXBF_MUSU_NDPA_PKT, rx_txbf_musu_ndpa_pkts_stats)
+ * 3.27 Add a new interface for flow-control. The following t2h messages have
+ *      been included: HTT_T2H_MSG_TYPE_FLOW_POOL_MAP and
+ *      HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP
+ * 3.28 Add a new interface for ring interface change. The following two h2t
+ *      and one t2h messages have been included:
+ *      HTT_H2T_MSG_TYPE_SRING_SETUP, HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG,
+ *      and HTT_T2H_MSG_TYPE_SRING_SETUP_DONE
+ * 3.29 Add definitions of htt_tx_msdu_desc_ext2_t descriptor and other
+ *      information elements passed from the host to a Lithium target,
+ *      Add definitions of the HTT_H2T ADD_WDS_ENTRY and DELETE_WDS_ENTRY
+ *      messages and the HTT_T2H MAP_FLOW_INFO message (for use with Lithium
+ *      targets).
+ * 3.30 Add pktlog flag inside HTT_T2H RX_IN_ORD_PADDR_IND message
+ * 3.31 Add HTT_H2T_MSG_TYPE_RFS_CONFIG
+ */
+#define HTT_CURRENT_VERSION_MAJOR 3
+#define HTT_CURRENT_VERSION_MINOR 31
+
+#define HTT_NUM_TX_FRAG_DESC  1024
+
+#define HTT_WIFI_IP_VERSION(x,y) ((x) == (y))
+
+#define HTT_CHECK_SET_VAL(field, val) \
+    A_ASSERT(!((val) & ~((field ## _M) >> (field ## _S))))
+
+/* macros to assist in sign-extending fields from HTT messages */
+#define HTT_SIGN_BIT_MASK(field) \
+    ((field ## _M + (1 << field ## _S)) >> 1)
+#define HTT_SIGN_BIT(_val, field) \
+    (_val & HTT_SIGN_BIT_MASK(field))
+#define HTT_SIGN_BIT_UNSHIFTED(_val, field) \
+    (HTT_SIGN_BIT(_val, field) >> field ## _S)
+#define HTT_SIGN_BIT_UNSHIFTED_MINUS_ONE(_val, field) \
+    (HTT_SIGN_BIT_UNSHIFTED(_val, field) - 1)
+#define HTT_SIGN_BIT_EXTENSION(_val, field) \
+    (~(HTT_SIGN_BIT_UNSHIFTED(_val, field) | \
+    HTT_SIGN_BIT_UNSHIFTED_MINUS_ONE(_val, field)))
+#define HTT_SIGN_BIT_EXTENSION_MASK(_val, field) \
+    (HTT_SIGN_BIT_EXTENSION(_val, field) & ~(field ## _M >> field ## _S))
+
+
+/*
+ * TEMPORARY:
+ * Provide HTT_H2T_MSG_TYPE_MGMT_TX as an alias for
+ * DEPRECATED_HTT_H2T_MSG_TYPE_MGMT_TX until all code
+ * that refers to HTT_H2T_MSG_TYPE_MGMT_TX has been
+ * updated.
+ */
+#define HTT_H2T_MSG_TYPE_MGMT_TX DEPRECATED_HTT_H2T_MSG_TYPE_MGMT_TX
+
+/*
+ * TEMPORARY:
+ * Provide HTT_T2H_MSG_TYPE_RC_UPDATE_IND as an alias for
+ * DEPRECATED_HTT_T2H_MSG_TYPE_RC_UPDATE_IND until all code
+ * that refers to HTT_T2H_MSG_TYPE_RC_UPDATE_IND has been
+ * updated.
+ */
+#define HTT_T2H_MSG_TYPE_RC_UPDATE_IND DEPRECATED_HTT_T2H_MSG_TYPE_RC_UPDATE_IND
+
+/* HTT Access Category values */
+enum HTT_AC_WMM {
+    /* WMM Access Categories */
+    HTT_AC_WMM_BE         = 0x0,
+    HTT_AC_WMM_BK         = 0x1,
+    HTT_AC_WMM_VI         = 0x2,
+    HTT_AC_WMM_VO         = 0x3,
+    /* extension Access Categories */
+    HTT_AC_EXT_NON_QOS    = 0x4,
+    HTT_AC_EXT_UCAST_MGMT = 0x5,
+    HTT_AC_EXT_MCAST_DATA = 0x6,
+    HTT_AC_EXT_MCAST_MGMT = 0x7,
+};
+enum HTT_AC_WMM_MASK {
+    /* WMM Access Categories */
+    HTT_AC_WMM_BE_MASK = (1 << HTT_AC_WMM_BE),
+    HTT_AC_WMM_BK_MASK = (1 << HTT_AC_WMM_BK),
+    HTT_AC_WMM_VI_MASK = (1 << HTT_AC_WMM_VI),
+    HTT_AC_WMM_VO_MASK = (1 << HTT_AC_WMM_VO),
+    /* extension Access Categories */
+    HTT_AC_EXT_NON_QOS_MASK    = (1 << HTT_AC_EXT_NON_QOS),
+    HTT_AC_EXT_UCAST_MGMT_MASK = (1 << HTT_AC_EXT_UCAST_MGMT),
+    HTT_AC_EXT_MCAST_DATA_MASK = (1 << HTT_AC_EXT_MCAST_DATA),
+    HTT_AC_EXT_MCAST_MGMT_MASK = (1 << HTT_AC_EXT_MCAST_MGMT),
+};
+#define HTT_AC_MASK_WMM \
+    (HTT_AC_WMM_BE_MASK | HTT_AC_WMM_BK_MASK | \
+     HTT_AC_WMM_VI_MASK | HTT_AC_WMM_VO_MASK)
+#define HTT_AC_MASK_EXT \
+    (HTT_AC_EXT_NON_QOS_MASK | HTT_AC_EXT_UCAST_MGMT_MASK | \
+    HTT_AC_EXT_MCAST_DATA_MASK | HTT_AC_EXT_MCAST_MGMT_MASK)
+#define HTT_AC_MASK_ALL (HTT_AC_MASK_WMM | HTT_AC_MASK_EXT)
+
+/*
+ * htt_dbg_stats_type -
+ * bit positions for each stats type within a stats type bitmask
+ * The bitmask contains 24 bits.
+ */
+enum htt_dbg_stats_type {
+    HTT_DBG_STATS_WAL_PDEV_TXRX              =  0, /* bit 0  ->    0x1 */
+    HTT_DBG_STATS_RX_REORDER                 =  1, /* bit 1  ->    0x2 */
+    HTT_DBG_STATS_RX_RATE_INFO               =  2, /* bit 2  ->    0x4 */
+    HTT_DBG_STATS_TX_PPDU_LOG                =  3, /* bit 3  ->    0x8 */
+    HTT_DBG_STATS_TX_RATE_INFO               =  4, /* bit 4  ->   0x10 */
+    HTT_DBG_STATS_TIDQ                       =  5, /* bit 5  ->   0x20 */
+    HTT_DBG_STATS_TXBF_INFO                  =  6, /* bit 6  ->   0x40 */
+    HTT_DBG_STATS_SND_INFO                   =  7, /* bit 7  ->   0x80 */
+    HTT_DBG_STATS_ERROR_INFO                 =  8, /* bit 8  ->  0x100 */
+    HTT_DBG_STATS_TX_SELFGEN_INFO            =  9, /* bit 9  ->  0x200 */
+    HTT_DBG_STATS_TX_MU_INFO                 = 10, /* bit 10 ->  0x400 */
+    HTT_DBG_STATS_SIFS_RESP_INFO             = 11, /* bit 11 ->  0x800 */
+    HTT_DBG_STATS_RX_REMOTE_RING_BUFFER_INFO = 12, /* bit 12 -> 0x1000 */
+    HTT_DBG_STATS_RX_RATE_INFO_V2            = 13, /* bit 13 -> 0x2000 */
+    HTT_DBG_STATS_TX_RATE_INFO_V2            = 14, /* bit 14 -> 0x4000 */
+    HTT_DBG_STATS_TXBF_MUSU_NDPA_PKT         = 15, /* bit 15 -> 0x8000 */
+    /* bits 16-23 currently reserved */
+
+    /* keep this last */
+    HTT_DBG_NUM_STATS
+};
+
+/*=== HTT option selection TLVs ===
+ * Certain HTT messages have alternatives or options.
+ * For such cases, the host and target need to agree on which option to use.
+ * Option specification TLVs can be appended to the VERSION_REQ and
+ * VERSION_CONF messages to select options other than the default.
+ * These TLVs are entirely optional - if they are not provided, there is a
+ * well-defined default for each option.  If they are provided, they can be
+ * provided in any order.  Each TLV can be present or absent independent of
+ * the presence / absence of other TLVs.
+ *
+ * The HTT option selection TLVs use the following format:
+ *     |31                             16|15             8|7              0|
+ *     |---------------------------------+----------------+----------------|
+ *     |        value (payload)          |     length     |       tag      |
+ *     |-------------------------------------------------------------------|
+ * The value portion need not be only 2 bytes; it can be extended by any
+ * integer number of 4-byte units.  The total length of the TLV, including
+ * the tag and length fields, must be a multiple of 4 bytes.  The length
+ * field specifies the total TLV size in 4-byte units.  Thus, the typical
+ * TLV, with a 1-byte tag field, a 1-byte length field, and a 2-byte value
+ * field, would store 0x1 in its length field, to show that the TLV occupies
+ * a single 4-byte unit.
+ */
+
+/*--- TLV header format - applies to all HTT option TLVs ---*/
+
+enum HTT_OPTION_TLV_TAGS {
+    HTT_OPTION_TLV_TAG_RESERVED0                = 0x0,
+    HTT_OPTION_TLV_TAG_LL_BUS_ADDR_SIZE         = 0x1,
+    HTT_OPTION_TLV_TAG_HL_SUPPRESS_TX_COMPL_IND = 0x2,
+    HTT_OPTION_TLV_TAG_MAX_TX_QUEUE_GROUPS      = 0x3,
+    HTT_OPTION_TLV_TAG_SUPPORT_TX_MSDU_DESC_EXT = 0x4,
+};
+
+PREPACK struct htt_option_tlv_header_t {
+    A_UINT8 tag;
+    A_UINT8 length;
+} POSTPACK;
+
+#define HTT_OPTION_TLV_TAG_M      0x000000ff
+#define HTT_OPTION_TLV_TAG_S      0
+#define HTT_OPTION_TLV_LENGTH_M   0x0000ff00
+#define HTT_OPTION_TLV_LENGTH_S   8
+/*
+ * value0 - 16 bit value field stored in word0
+ * The TLV's value field may be longer than 2 bytes, in which case
+ * the remainder of the value is stored in word1, word2, etc.
+ */
+#define HTT_OPTION_TLV_VALUE0_M   0xffff0000
+#define HTT_OPTION_TLV_VALUE0_S   16
+
+#define HTT_OPTION_TLV_TAG_SET(word, tag)           \
+    do {                                            \
+        HTT_CHECK_SET_VAL(HTT_OPTION_TLV_TAG, tag); \
+        (word) |= ((tag) << HTT_OPTION_TLV_TAG_S);  \
+    } while (0)
+#define HTT_OPTION_TLV_TAG_GET(word) \
+    (((word) & HTT_OPTION_TLV_TAG_M) >> HTT_OPTION_TLV_TAG_S)
+
+#define HTT_OPTION_TLV_LENGTH_SET(word, tag)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_OPTION_TLV_LENGTH, tag); \
+        (word) |= ((tag) << HTT_OPTION_TLV_LENGTH_S);  \
+    } while (0)
+#define HTT_OPTION_TLV_LENGTH_GET(word) \
+    (((word) & HTT_OPTION_TLV_LENGTH_M) >> HTT_OPTION_TLV_LENGTH_S)
+
+#define HTT_OPTION_TLV_VALUE0_SET(word, tag)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_OPTION_TLV_VALUE0, tag); \
+        (word) |= ((tag) << HTT_OPTION_TLV_VALUE0_S);  \
+    } while (0)
+#define HTT_OPTION_TLV_VALUE0_GET(word) \
+    (((word) & HTT_OPTION_TLV_VALUE0_M) >> HTT_OPTION_TLV_VALUE0_S)
+
+/*--- format of specific HTT option TLVs ---*/
+
+/*
+ * HTT option TLV for specifying LL bus address size
+ * Some chips require bus addresses used by the target to access buffers
+ * within the host's memory to be 32 bits; others require bus addresses
+ * used by the target to access buffers within the host's memory to be
+ * 64 bits.
+ * The LL_BUS_ADDR_SIZE TLV can be sent from the target to the host as
+ * a suffix to the VERSION_CONF message to specify which bus address format
+ * the target requires.
+ * If this LL_BUS_ADDR_SIZE TLV is not sent by the target, the host should
+ * default to providing bus addresses to the target in 32-bit format.
+ */
+enum HTT_OPTION_TLV_LL_BUS_ADDR_SIZE_VALUES {
+    HTT_OPTION_TLV_LL_BUS_ADDR_SIZE32 = 0x0,
+    HTT_OPTION_TLV_LL_BUS_ADDR_SIZE64 = 0x1,
+};
+PREPACK struct htt_option_tlv_ll_bus_addr_size_t {
+    struct htt_option_tlv_header_t hdr;
+    A_UINT16 ll_bus_addr_size; /* LL_BUS_ADDR_SIZE_VALUES enum */
+} POSTPACK;
+
+/*
+ * HTT option TLV for specifying whether HL systems should indicate
+ * over-the-air tx completion for individual frames, or should instead
+ * send a bulk TX_CREDIT_UPDATE_IND except when the host explicitly
+ * requests an OTA tx completion for a particular tx frame.
+ * This option does not apply to LL systems, where the TX_COMPL_IND
+ * is mandatory.
+ * This option is primarily intended for HL systems in which the tx frame
+ * downloads over the host --> target bus are as slow as or slower than
+ * the transmissions over the WLAN PHY.  For cases where the bus is faster
+ * than the WLAN PHY, the target will transmit relatively large A-MPDUs,
+ * and consquently will send one TX_COMPL_IND message that covers several
+ * tx frames.  For cases where the WLAN PHY is faster than the bus,
+ * the target will end up transmitting very short A-MPDUs, and consequently
+ * sending many TX_COMPL_IND messages, which each cover a very small number
+ * of tx frames.
+ * The HL_SUPPRESS_TX_COMPL_IND TLV can be sent by the host to the target as
+ * a suffix to the VERSION_REQ message to request whether the host desires to
+ * use TX_CREDIT_UPDATE_IND rather than TX_COMPL_IND.  The target can then
+ * send a HTT_SUPPRESS_TX_COMPL_IND TLV to the host as a suffix to the
+ * VERSION_CONF message to confirm whether TX_CREDIT_UPDATE_IND will be used
+ * rather than TX_COMPL_IND.  TX_CREDIT_UPDATE_IND shall only be used if the
+ * host sends a HL_SUPPRESS_TX_COMPL_IND TLV requesting use of
+ * TX_CREDIT_UPDATE_IND, and the target sends a HL_SUPPRESS_TX_COMPLE_IND TLV
+ * back to the host confirming use of TX_CREDIT_UPDATE_IND.
+ * Lack of a HL_SUPPRESS_TX_COMPL_IND TLV from either host --> target or
+ * target --> host is equivalent to a HL_SUPPRESS_TX_COMPL_IND that
+ * explicitly specifies HL_ALLOW_TX_COMPL_IND in the value payload of the
+ * TLV.
+ */
+enum HTT_OPTION_TLV_HL_SUPPRESS_TX_COMPL_IND_VALUES {
+    HTT_OPTION_TLV_HL_ALLOW_TX_COMPL_IND = 0x0,
+    HTT_OPTION_TLV_HL_SUPPRESS_TX_COMPL_IND = 0x1,
+};
+PREPACK struct htt_option_tlv_hl_suppress_tx_compl_ind_t {
+    struct htt_option_tlv_header_t hdr;
+    A_UINT16 hl_suppress_tx_compl_ind; /* HL_SUPPRESS_TX_COMPL_IND enum */
+} POSTPACK;
+
+/*
+ * HTT option TLV for specifying how many tx queue groups the target
+ * may establish.
+ * This TLV specifies the maximum value the target may send in the
+ * txq_group_id field of any TXQ_GROUP information elements sent by
+ * the target to the host.  This allows the host to pre-allocate an
+ * appropriate number of tx queue group structs.
+ *
+ * The MAX_TX_QUEUE_GROUPS_TLV can be sent from the host to the target as
+ * a suffix to the VERSION_REQ message to specify whether the host supports
+ * tx queue groups at all, and if so if there is any limit on the number of
+ * tx queue groups that the host supports.
+ * The MAX_TX_QUEUE_GROUPS TLV can be sent from the target to the host as
+ * a suffix to the VERSION_CONF message.  If the host has specified in the
+ * VER_REQ message a limit on the number of tx queue groups the host can
+ * supprt, the target shall limit its specification of the maximum tx groups
+ * to be no larger than this host-specified limit.
+ *
+ * If the target does not provide a MAX_TX_QUEUE_GROUPS TLV, then the host
+ * shall preallocate 4 tx queue group structs, and the target shall not
+ * specify a txq_group_id larger than 3.
+ */
+enum HTT_OPTION_TLV_MAX_TX_QUEUE_GROUPS_VALUES {
+    HTT_OPTION_TLV_TX_QUEUE_GROUPS_UNSUPPORTED = 0,
+    /*
+     * values 1 through N specify the max number of tx queue groups
+     * the sender supports
+     */
+    HTT_OPTION_TLV_TX_QUEUE_GROUPS_UNLIMITED = 0xffff,
+};
+/* TEMPORARY backwards-compatibility alias for a typo fix -
+ * The htt_option_tlv_mac_tx_queue_groups_t typo has been corrected
+ * to  htt_option_tlv_max_tx_queue_groups_t, but an alias is provided
+ * to support the old name (with the typo) until all references to the
+ * old name are replaced with the new name.
+ */
+#define htt_option_tlv_mac_tx_queue_groups_t htt_option_tlv_max_tx_queue_groups_t
+PREPACK struct htt_option_tlv_max_tx_queue_groups_t {
+    struct htt_option_tlv_header_t hdr;
+    A_UINT16 max_tx_queue_groups; /* max txq_group_id + 1 */
+} POSTPACK;
+
+/*
+ * HTT option TLV for specifying whether the target supports an extended
+ * version of the HTT tx descriptor.  If the target provides this TLV
+ * and specifies in the TLV that the target supports an extended version
+ * of the HTT tx descriptor, the target must check the "extension" bit in
+ * the HTT tx descriptor, and if the extension bit is set, to expect a
+ * HTT tx MSDU extension descriptor immediately following the HTT tx MSDU
+ * descriptor.  Furthermore, the target must provide room for the HTT
+ * tx MSDU extension descriptor in the target's TX_FRM buffer.
+ * This option is intended for systems where the host needs to explicitly
+ * control the transmission parameters such as tx power for individual
+ * tx frames.
+ * The SUPPORT_TX_MSDU_DESC_EXT TLB can be sent by the target to the host
+ * as a suffix to the VERSION_CONF message to explicitly specify whether
+ * the target supports the HTT tx MSDU extension descriptor.
+ * Lack of a SUPPORT_TX_MSDU_DESC_EXT from the target shall be interpreted
+ * by the host as lack of target support for the HTT tx MSDU extension
+ * descriptor; the host shall provide HTT tx MSDU extension descriptors in
+ * the HTT_H2T TX_FRM messages only if the target indicates it supports
+ * the HTT tx MSDU extension descriptor.
+ * The host is not required to provide the HTT tx MSDU extension descriptor
+ * just because the target supports it; the target must check the
+ * "extension" bit in the HTT tx MSDU descriptor to determine whether an
+ * extension descriptor is present.
+ */
+enum HTT_OPTION_TLV_SUPPORT_TX_MSDU_DESC_EXT_VALUES {
+    HTT_OPTION_TLV_TX_MSDU_DESC_EXT_NO_SUPPORT = 0x0,
+    HTT_OPTION_TLV_TX_MSDU_DESC_EXT_SUPPORT = 0x1,
+};
+PREPACK struct htt_option_tlv_support_tx_msdu_desc_ext_t {
+    struct htt_option_tlv_header_t hdr;
+    A_UINT16 tx_msdu_desc_ext_support; /* SUPPORT_TX_MSDU_DESC_EXT enum */
+} POSTPACK;
+
+
+/*=== host -> target messages ===============================================*/
+
+enum htt_h2t_msg_type {
+    HTT_H2T_MSG_TYPE_VERSION_REQ           = 0x0,
+    HTT_H2T_MSG_TYPE_TX_FRM                = 0x1,
+    HTT_H2T_MSG_TYPE_RX_RING_CFG           = 0x2,
+    HTT_H2T_MSG_TYPE_STATS_REQ             = 0x3,
+    HTT_H2T_MSG_TYPE_SYNC                  = 0x4,
+    HTT_H2T_MSG_TYPE_AGGR_CFG              = 0x5,
+    HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG    = 0x6,
+    DEPRECATED_HTT_H2T_MSG_TYPE_MGMT_TX    = 0x7, /* no longer used */
+    HTT_H2T_MSG_TYPE_WDI_IPA_CFG           = 0x8,
+    HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQ        = 0x9,
+    HTT_H2T_MSG_TYPE_AGGR_CFG_EX           = 0xa, /* per vdev amsdu subfrm limit */
+    HTT_H2T_MSG_TYPE_SRING_SETUP           = 0xb,
+    HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG = 0xc,
+    HTT_H2T_MSG_TYPE_ADD_WDS_ENTRY         = 0xd,
+    HTT_H2T_MSG_TYPE_DELETE_WDS_ENTRY      = 0xe,
+    HTT_H2T_MSG_TYPE_RFS_CONFIG            = 0xf,
+
+    /* keep this last */
+    HTT_H2T_NUM_MSGS
+};
+
+/*
+ * HTT host to target message type -
+ * stored in bits 7:0 of the first word of the message
+ */
+#define HTT_H2T_MSG_TYPE_M      0xff
+#define HTT_H2T_MSG_TYPE_S      0
+
+#define HTT_H2T_MSG_TYPE_SET(word, msg_type)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_H2T_MSG_TYPE, msg_type); \
+        (word) |= ((msg_type) << HTT_H2T_MSG_TYPE_S);  \
+    } while (0)
+#define HTT_H2T_MSG_TYPE_GET(word) \
+    (((word) & HTT_H2T_MSG_TYPE_M) >> HTT_H2T_MSG_TYPE_S)
+
+/**
+ * @brief host -> target version number request message definition
+ *
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |                     reserved                     |    msg type    |
+ *     |-------------------------------------------------------------------|
+ *     :                    option request TLV (optional)                  |
+ *     :...................................................................:
+ *
+ * The VER_REQ message may consist of a single 4-byte word, or may be
+ * extended with TLVs that specify which HTT options the host is requesting
+ * from the target.
+ * The following option TLVs may be appended to the VER_REQ message:
+ *   - HL_SUPPRESS_TX_COMPL_IND
+ *   - HL_MAX_TX_QUEUE_GROUPS
+ * These TLVs may appear in an arbitrary order.  Any number of these TLVs
+ * may be appended to the VER_REQ message (but only one TLV of each type).
+ *
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a version number request message
+ *     Value: 0x0
+ */
+
+#define HTT_VER_REQ_BYTES 4
+
+/* TBDXXX: figure out a reasonable number */
+#define HTT_HL_DATA_SVC_PIPE_DEPTH         24
+#define HTT_LL_DATA_SVC_PIPE_DEPTH         64
+
+/**
+ * @brief HTT tx MSDU descriptor
+ *
+ * @details
+ *  The HTT tx MSDU descriptor is created by the host HTT SW for each
+ *  tx MSDU.  The HTT tx MSDU descriptor contains the information that
+ *  the target firmware needs for the FW's tx processing, particularly
+ *  for creating the HW msdu descriptor.
+ *  The same HTT tx descriptor is used for HL and LL systems, though
+ *  a few fields within the tx descriptor are used only by LL or
+ *  only by HL.
+ *  The HTT tx descriptor is defined in two manners: by a struct with
+ *  bitfields, and by a series of [dword offset, bit mask, bit shift]
+ *  definitions.
+ *  The target should use the struct def, for simplicitly and clarity,
+ *  but the host shall use the bit-mast + bit-shift defs, to be endian-
+ *  neutral.  Specifically, the host shall use the get/set macros built
+ *  around the mask + shift defs.
+ */
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_80211_HDR_S   0
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_80211_HDR_M   0x1
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_AGGR_S     1
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_AGGR_M     0x2
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_ENCRYPT_S  2
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_ENCRYPT_M  0x4
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_CLASSIFY_S 3
+#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_CLASSIFY_M 0x8
+
+#define HTT_TX_VDEV_ID_WORD 0
+#define HTT_TX_VDEV_ID_MASK 0x3f
+#define HTT_TX_VDEV_ID_SHIFT 16
+
+#define HTT_TX_L3_CKSUM_OFFLOAD      1
+#define HTT_TX_L4_CKSUM_OFFLOAD      2
+
+#define HTT_TX_MSDU_LEN_DWORD 1
+#define HTT_TX_MSDU_LEN_MASK 0xffff;
+
+/*
+ * HTT_VAR_PADDR macros
+ * Allow physical / bus addresses to be either a single 32-bit value,
+ * or a 64-bit value, stored as a little-endian lo,hi pair of 32-bit parts
+ */
+#define HTT_VAR_PADDR32(var_name) \
+    A_UINT32 var_name
+#define HTT_VAR_PADDR64_LE(var_name)        \
+    struct {                                \
+        /* little-endian: lo precedes hi */ \
+        A_UINT32 lo;                        \
+        A_UINT32 hi;                        \
+    } var_name
+
+/*
+ * TEMPLATE_HTT_TX_MSDU_DESC_T:
+ * This macro defines a htt_tx_msdu_descXXX_t in which any physical
+ * addresses are stored in a XXX-bit field.
+ * This macro is used to define both htt_tx_msdu_desc32_t and
+ * htt_tx_msdu_desc64_t structs.
+ */
+#define TEMPLATE_HTT_TX_MSDU_DESC_T(_paddr_bits_, _paddr__frags_desc_ptr_)     \
+PREPACK struct htt_tx_msdu_desc ## _paddr_bits_ ## _t                          \
+{                                                                              \
+    /* DWORD 0: flags and meta-data */                                         \
+    A_UINT32                                                                   \
+        msg_type: 8, /* HTT_H2T_MSG_TYPE_TX_FRM */                             \
+                                                                               \
+        /* pkt_subtype -                                                       \
+         * Detailed specification of the tx frame contents, extending the      \
+         * general specification provided by pkt_type.                         \
+         * FIX THIS: ADD COMPLETE SPECS FOR THIS FIELDS VALUE, e.g.            \
+         *     pkt_type    | pkt_subtype                                       \
+         *     ==============================================================  \
+         *     802.3       | bit 0:3    - Reserved                             \
+         *                 | bit 4: 0x0 - Copy-Engine Classification Results   \
+         *                 |              not appended to the HTT message      \
+         *                 |        0x1 - Copy-Engine Classification Results   \
+         *                 |              appended to the HTT message in the   \
+         *                 |              format:                              \
+         *                 |              [HTT tx desc, frame header,          \
+         *                 |              CE classification results]           \
+         *                 |              The CE classification results begin  \
+         *                 |              at the next 4-byte boundary after    \
+         *                 |              the frame header.                    \
+         *     ------------+-------------------------------------------------  \
+         *     Eth2        | bit 0:3    - Reserved                             \
+         *                 | bit 4: 0x0 - Copy-Engine Classification Results   \
+         *                 |              not appended to the HTT message      \
+         *                 |        0x1 - Copy-Engine Classification Results   \
+         *                 |              appended to the HTT message.         \
+         *                 |              See the above specification of the   \
+         *                 |              CE classification results location.  \
+         *     ------------+-------------------------------------------------  \
+         *     native WiFi | bit 0:3    - Reserved                             \
+         *                 | bit 4: 0x0 - Copy-Engine Classification Results   \
+         *                 |              not appended to the HTT message      \
+         *                 |        0x1 - Copy-Engine Classification Results   \
+         *                 |              appended to the HTT message.         \
+         *                 |              See the above specification of the   \
+         *                 |              CE classification results location.  \
+         *     ------------+-------------------------------------------------  \
+         *     mgmt        | 0x0 - 802.11 MAC header absent                    \
+         *                 | 0x1 - 802.11 MAC header present                   \
+         *     ------------+-------------------------------------------------  \
+         *     raw         | bit 0: 0x0 - 802.11 MAC header absent             \
+         *                 |        0x1 - 802.11 MAC header present            \
+         *                 | bit 1: 0x0 - allow aggregation                    \
+         *                 |        0x1 - don't allow aggregation              \
+         *                 | bit 2: 0x0 - perform encryption                   \
+         *                 |        0x1 - don't perform encryption             \
+         *                 | bit 3: 0x0 - perform tx classification / queuing  \
+         *                 |        0x1 - don't perform tx classification;     \
+         *                 |              insert the frame into the "misc"     \
+         *                 |              tx queue                             \
+         *                 | bit 4: 0x0 - Copy-Engine Classification Results   \
+         *                 |              not appended to the HTT message      \
+         *                 |        0x1 - Copy-Engine Classification Results   \
+         *                 |              appended to the HTT message.         \
+         *                 |              See the above specification of the   \
+         *                 |              CE classification results location.  \
+         */                                                                    \
+        pkt_subtype: 5,                                                        \
+                                                                               \
+        /* pkt_type -                                                          \
+         * General specification of the tx frame contents.                     \
+         * The htt_pkt_type enum should be used to specify and check the       \
+         * value of this field.                                                \
+         */                                                                    \
+        pkt_type: 3,                                                           \
+                                                                               \
+        /* vdev_id -                                                           \
+         * ID for the vdev that is sending this tx frame.                      \
+         * For certain non-standard packet types, e.g. pkt_type == raw         \
+         * and (pkt_subtype >> 3) == 1, this field is not relevant/valid.      \
+         * This field is used primarily for determining where to queue         \
+         * broadcast and multicast frames.                                     \
+         */                                                                    \
+        vdev_id: 6,                                                            \
+        /* ext_tid -                                                           \
+         * The extended traffic ID.                                            \
+         * If the TID is unknown, the extended TID is set to                   \
+         * HTT_TX_EXT_TID_INVALID.                                             \
+         * If the tx frame is QoS data, then the extended TID has the 0-15     \
+         * value of the QoS TID.                                               \
+         * If the tx frame is non-QoS data, then the extended TID is set to    \
+         * HTT_TX_EXT_TID_NON_QOS.                                             \
+         * If the tx frame is multicast or broadcast, then the extended TID    \
+         * is set to HTT_TX_EXT_TID_MCAST_BCAST.                               \
+         */                                                                    \
+        ext_tid: 5,                                                            \
+                                                                               \
+        /* postponed -                                                         \
+         * This flag indicates whether the tx frame has been downloaded to     \
+         * the target before but discarded by the target, and now is being     \
+         * downloaded again; or if this is a new frame that is being           \
+         * downloaded for the first time.                                      \
+         * This flag allows the target to determine the correct order for      \
+         * transmitting new vs. old frames.                                    \
+         * value: 0 -> new frame, 1 -> re-send of a previously sent frame      \
+         * This flag only applies to HL systems, since in LL systems,          \
+         * the tx flow control is handled entirely within the target.          \
+         */                                                                    \
+        postponed: 1,                                                          \
+                                                                               \
+        /* extension -                                                         \
+         * This flag indicates whether a HTT tx MSDU extension descriptor      \
+         * (htt_tx_msdu_desc_ext_t) follows this HTT tx MSDU descriptor.       \
+         *                                                                     \
+         * 0x0 - no extension MSDU descriptor is present                       \
+         * 0x1 - an extension MSDU descriptor immediately follows the          \
+         *       regular MSDU descriptor                                       \
+         */                                                                    \
+        extension: 1,                                                          \
+                                                                               \
+        /* cksum_offload -                                                     \
+         * This flag indicates whether checksum offload is enabled or not      \
+         * for this frame. Target FW use this flag to turn on HW checksumming  \
+         *  0x0 - No checksum offload                                          \
+         *  0x1 - L3 header checksum only                                      \
+         *  0x2 - L4 checksum only                                             \
+         *  0x3 - L3 header checksum + L4 checksum                             \
+         */                                                                    \
+        cksum_offload: 2,                                                      \
+                                                                               \
+        /* tx_comp_req -                                                       \
+         * This flag indicates whether Tx Completion                           \
+         * from fw is required or not.                                         \
+         * This  flag is only relevant if tx completion is not                 \
+         * universally enabled.                                                \
+         * For all LL systems, tx completion is mandatory,                     \
+         * so this flag will be irrelevant.                                    \
+         * For HL systems tx completion is optional, but HL systems in which   \
+         * the bus throughput exceeds the WLAN throughput will                 \
+         * probably want to always use tx completion, and thus                 \
+         * would not check this flag.                                          \
+         * This flag is required when tx completions are not used universally, \
+         * but are still required for certain tx frames for which              \
+         * an OTA delivery acknowledgment is needed by the host.               \
+         * In practice, this would be for HL systems in which the              \
+         * bus throughput is less than the WLAN throughput.                    \
+         *                                                                     \
+         * 0x0 - Tx Completion Indication from Fw not required                 \
+         * 0x1 - Tx Completion Indication from Fw is required                  \
+         */                                                                    \
+        tx_compl_req: 1;                                                       \
+                                                                               \
+                                                                               \
+        /* DWORD 1: MSDU length and ID */                                      \
+        A_UINT32                                                               \
+            len: 16, /* MSDU length, in bytes */                               \
+            id:  16; /* MSDU ID used to identify the MSDU to the host,         \
+                      * and this id is used to calculate fragmentation         \
+                      * descriptor pointer inside the target based on          \
+                      * the base address, configured inside the target.        \
+                      */                                                       \
+                                                                               \
+        /* DWORD 2 (or 2-3): fragmentation descriptor bus address */           \
+        /* frags_desc_ptr -                                                    \
+         * The fragmentation descriptor pointer tells the HW's MAC DMA         \
+         * where the tx frame's fragments reside in memory.                    \
+         * This field only applies to LL systems, since in HL systems the      \
+         * (degenerate single-fragment) fragmentation descriptor is created    \
+         * within the target.                                                  \
+         */                                                                    \
+        _paddr__frags_desc_ptr_;                                               \
+                                                                               \
+        /* DWORD 3 (or 4): peerid, chanfreq */                                 \
+        /*                                                                     \
+         * Peer ID : Target can use this value to know which peer-id packet    \
+         *           destined to.                                              \
+         *           It's intended to be specified by host in case of NAWDS.   \
+         */                                                                    \
+        A_UINT16 peerid;                                                       \
+                                                                               \
+        /*                                                                     \
+         * Channel frequency: This identifies the desired channel              \
+         * frequency (in mhz) for tx frames. This is used by FW to help        \
+         * determine when it is safe to transmit or drop frames for            \
+         * off-channel operation.                                              \
+         * The default value of zero indicates to FW that the corresponding    \
+         * VDEV's home channel (if there is one) is the desired channel        \
+         * frequency.                                                          \
+         */                                                                    \
+        A_UINT16 chanfreq;                                                     \
+                                                                               \
+        /* Reason reserved is commented is increasing the htt structure size   \
+         * leads to some wierd issues. Contact Raj/Kyeyoon for more info       \
+         * A_UINT32 reserved_dword3_bits0_31;                                  \
+         */                                                                    \
+} POSTPACK
+/* define a htt_tx_msdu_desc32_t type */
+TEMPLATE_HTT_TX_MSDU_DESC_T(32, HTT_VAR_PADDR32(frags_desc_ptr));
+/* define a htt_tx_msdu_desc64_t type */
+TEMPLATE_HTT_TX_MSDU_DESC_T(64, HTT_VAR_PADDR64_LE(frags_desc_ptr));
+/*
+ * Make htt_tx_msdu_desc_t be an alias for either
+ * htt_tx_msdu_desc32_t or htt_tx_msdu_desc64_t
+ */
+#if HTT_PADDR64
+    #define htt_tx_msdu_desc_t htt_tx_msdu_desc64_t
+#else
+    #define htt_tx_msdu_desc_t htt_tx_msdu_desc32_t
+#endif
+
+/* decriptor information for Management frame*/
+/*
+ * THIS htt_mgmt_tx_desc_t STRUCT IS DEPRECATED - DON'T USE IT.
+ * BOTH MANAGEMENT AND DATA FRAMES SHOULD USE htt_tx_msdu_desc_t.
+ */
+#define HTT_MGMT_FRM_HDR_DOWNLOAD_LEN    32
+extern A_UINT32 mgmt_hdr_len;
+PREPACK struct htt_mgmt_tx_desc_t {
+    A_UINT32    msg_type;
+#if HTT_PADDR64
+    A_UINT64    frag_paddr; /* DMAble address of the data */
+#else
+    A_UINT32    frag_paddr; /* DMAble address of the data */
+#endif
+    A_UINT32    desc_id;    /* returned to host during completion
+                             * to free the meory*/
+    A_UINT32    len;    /* Fragment length */
+    A_UINT32    vdev_id; /* virtual device ID*/
+    A_UINT8     hdr[HTT_MGMT_FRM_HDR_DOWNLOAD_LEN]; /* frm header */
+} POSTPACK;
+
+PREPACK struct htt_mgmt_tx_compl_ind {
+    A_UINT32    desc_id;
+    A_UINT32    status;
+} POSTPACK;
+
+/*
+ * This SDU header size comes from the summation of the following:
+ *  1. Max of:
+ *     a.  Native WiFi header, for native WiFi frames: 24 bytes
+ *         (frame control, duration / ID, addr1, addr2, addr3, seq ctrl, addr4)
+ *     b.  802.11 header, for raw frames: 36 bytes
+ *         (frame control, duration / ID, addr1, addr2, addr3, seq ctrl, addr4,
+ *         QoS header, HT header)
+ *     c.  802.3 header, for ethernet frames: 14 bytes
+ *         (destination address, source address, ethertype / length)
+ *  2. Max of:
+ *     a.  IPv4 header, up through the DiffServ Code Point: 2 bytes
+ *     b.  IPv6 header, up through the Traffic Class: 2 bytes
+ *  3. 802.1Q VLAN header: 4 bytes
+ *  4. LLC/SNAP header: 8 bytes
+ */
+#define HTT_TX_HDR_SIZE_NATIVE_WIFI 30
+#define HTT_TX_HDR_SIZE_802_11_RAW 36
+#define HTT_TX_HDR_SIZE_ETHERNET 14
+
+#define HTT_TX_HDR_SIZE_OUTER_HDR_MAX HTT_TX_HDR_SIZE_802_11_RAW
+A_COMPILE_TIME_ASSERT(
+    htt_encap_hdr_size_max_check_nwifi,
+    HTT_TX_HDR_SIZE_OUTER_HDR_MAX >= HTT_TX_HDR_SIZE_NATIVE_WIFI);
+A_COMPILE_TIME_ASSERT(
+    htt_encap_hdr_size_max_check_enet,
+    HTT_TX_HDR_SIZE_OUTER_HDR_MAX >= HTT_TX_HDR_SIZE_ETHERNET);
+
+#define HTT_HL_TX_HDR_SIZE_IP 1600    /* also include payload */
+#define HTT_LL_TX_HDR_SIZE_IP 16      /* up to the end of UDP header for IPv4 case */
+
+#define HTT_TX_HDR_SIZE_802_1Q 4
+#define HTT_TX_HDR_SIZE_LLC_SNAP 8
+
+
+#define HTT_COMMON_TX_FRM_HDR_LEN \
+     (HTT_TX_HDR_SIZE_OUTER_HDR_MAX + \
+     HTT_TX_HDR_SIZE_802_1Q + \
+     HTT_TX_HDR_SIZE_LLC_SNAP)
+
+#define HTT_HL_TX_FRM_HDR_LEN \
+     (HTT_COMMON_TX_FRM_HDR_LEN + HTT_HL_TX_HDR_SIZE_IP)
+
+#define HTT_LL_TX_FRM_HDR_LEN \
+     (HTT_COMMON_TX_FRM_HDR_LEN + HTT_LL_TX_HDR_SIZE_IP)
+
+#define HTT_TX_DESC_LEN  sizeof(struct htt_tx_msdu_desc_t)
+
+/* dword 0 */
+#define HTT_TX_DESC_PKT_SUBTYPE_OFFSET_BYTES 0
+#define HTT_TX_DESC_PKT_SUBTYPE_OFFSET_DWORD 0
+#define HTT_TX_DESC_PKT_SUBTYPE_M      0x00001f00
+#define HTT_TX_DESC_PKT_SUBTYPE_S      8
+
+#define HTT_TX_DESC_NO_ENCRYPT_OFFSET_BYTES 0
+#define HTT_TX_DESC_NO_ENCRYPT_OFFSET_DWORD 0
+#define HTT_TX_DESC_NO_ENCRYPT_M      0x00000400
+#define HTT_TX_DESC_NO_ENCRYPT_S      10
+
+#define HTT_TX_DESC_PKT_TYPE_OFFSET_BYTES 0
+#define HTT_TX_DESC_PKT_TYPE_OFFSET_DWORD 0
+#define HTT_TX_DESC_PKT_TYPE_M         0x0000e000
+#define HTT_TX_DESC_PKT_TYPE_S         13
+
+#define HTT_TX_DESC_VDEV_ID_OFFSET_BYTES 0
+#define HTT_TX_DESC_VDEV_ID_OFFSET_DWORD 0
+#define HTT_TX_DESC_VDEV_ID_M          0x003f0000
+#define HTT_TX_DESC_VDEV_ID_S          16
+
+#define HTT_TX_DESC_EXT_TID_OFFSET_BYTES 0
+#define HTT_TX_DESC_EXT_TID_OFFSET_DWORD 0
+#define HTT_TX_DESC_EXT_TID_M          0x07c00000
+#define HTT_TX_DESC_EXT_TID_S          22
+
+#define HTT_TX_DESC_POSTPONED_OFFSET_BYTES 0
+#define HTT_TX_DESC_POSTPONED_OFFSET_DWORD 0
+#define HTT_TX_DESC_POSTPONED_M        0x08000000
+#define HTT_TX_DESC_POSTPONED_S        27
+
+#define HTT_TX_DESC_EXTENSION_OFFSET_BYTE 0
+#define HTT_TX_DESC_EXTENSION_OFFSET_DWORD 0
+#define HTT_TX_DESC_EXTENSION_M        0x10000000
+#define HTT_TX_DESC_EXTENSION_S        28
+
+#define HTT_TX_DESC_CKSUM_OFFLOAD_OFFSET_BYTES 0
+#define HTT_TX_DESC_CKSUM_OFFLOAD_OFFSET_DWORD 0
+#define HTT_TX_DESC_CKSUM_OFFLOAD_M 0x60000000
+#define HTT_TX_DESC_CKSUM_OFFLOAD_S 29
+
+#define HTT_TX_DESC_TX_COMP_OFFSET_BYTES 0
+#define HTT_TX_DESC_TX_COMP_OFFSET_DWORD 0
+#define HTT_TX_DESC_TX_COMP_M 0x80000000
+#define HTT_TX_DESC_TX_COMP_S 31
+
+/* dword 1 */
+#define HTT_TX_DESC_FRM_LEN_OFFSET_BYTES 4
+#define HTT_TX_DESC_FRM_LEN_OFFSET_DWORD 1
+#define HTT_TX_DESC_FRM_LEN_M          0x0000ffff
+#define HTT_TX_DESC_FRM_LEN_S          0
+
+#define HTT_TX_DESC_FRM_ID_OFFSET_BYTES 4
+#define HTT_TX_DESC_FRM_ID_OFFSET_DWORD 1
+#define HTT_TX_DESC_FRM_ID_M           0xffff0000
+#define HTT_TX_DESC_FRM_ID_S           16
+
+/* dword 2 */
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_OFFSET_BYTES 8
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_OFFSET_DWORD 2
+/* for systems using 64-bit format for bus addresses */
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_HI_M 0xffffffff
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_HI_S 0
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_LO_M 0xffffffff
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_LO_S 0
+/* for systems using 32-bit format for bus addresses */
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_M    0xffffffff
+#define HTT_TX_DESC_FRAGS_DESC_PADDR_S    0
+
+/* dword 3 */
+#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES_64 16
+#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES_32 12
+#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD_64 \
+        (HTT_TX_DESC_PEER_ID_OFFSET_BYTES_64 >> 2)
+#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD_32 \
+        (HTT_TX_DESC_PEER_ID_OFFSET_BYTES_32 >> 2)
+
+#if HTT_PADDR64
+#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES HTT_TX_DESC_PEER_ID_OFFSET_BYTES_64
+#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD HTT_TX_DESC_PEER_ID_OFFSET_DWORD_64
+#else
+#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES HTT_TX_DESC_PEER_ID_OFFSET_BYTES_32
+#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD HTT_TX_DESC_PEER_ID_OFFSET_DWORD_32
+#endif
+
+#define HTT_TX_DESC_PEER_ID_M 0x0000ffff
+#define HTT_TX_DESC_PEER_ID_S 0
+    /*
+     * TEMPORARY:
+     * The original definitions for the PEER_ID fields contained typos
+     * (with _DESC_PADDR appended to this PEER_ID field name).
+     * Retain deprecated original names for PEER_ID fields until all code that
+     * refers to them has been updated.
+     */
+    #define HTT_TX_DESC_PEERID_DESC_PADDR_OFFSET_BYTES \
+        HTT_TX_DESC_PEER_ID_OFFSET_BYTES
+    #define HTT_TX_DESC_PEERID_DESC_PADDR_OFFSET_DWORD \
+        HTT_TX_DESC_PEER_ID_OFFSET_DWORD
+    #define HTT_TX_DESC_PEERID_DESC_PADDR_M \
+        HTT_TX_DESC_PEER_ID_M
+    #define HTT_TX_DESC_PEERID_DESC_PADDR_S \
+        HTT_TX_DESC_PEER_ID_S
+
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_64 16 /* to dword with chan freq */
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_32 12 /* to dword with chan freq */
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_64 \
+        (HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_64 >> 2)
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_32 \
+        (HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_32 >> 2)
+
+#if HTT_PADDR64
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_64
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_64
+#else
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_32
+#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_32
+#endif
+
+#define HTT_TX_DESC_CHAN_FREQ_M 0xffff0000
+#define HTT_TX_DESC_CHAN_FREQ_S 16
+
+#define HTT_TX_DESC_PKT_SUBTYPE_GET(_var) \
+    (((_var) & HTT_TX_DESC_PKT_SUBTYPE_M) >> HTT_TX_DESC_PKT_SUBTYPE_S)
+#define HTT_TX_DESC_PKT_SUBTYPE_SET(_var, _val)            \
+    do {                                                   \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_PKT_SUBTYPE, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_PKT_SUBTYPE_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_NO_ENCRYPT_GET(_var) \
+    (((_var) & HTT_TX_DESC_NO_ENCRYPT_M) >> HTT_TX_DESC_NO_ENCRYPT_S)
+#define HTT_TX_DESC_NO_ENCRYPT_SET(_var, _val)            \
+    do {                                                   \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_NO_ENCRYPT, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_NO_ENCRYPT_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_PKT_TYPE_GET(_var) \
+    (((_var) & HTT_TX_DESC_PKT_TYPE_M) >> HTT_TX_DESC_PKT_TYPE_S)
+#define HTT_TX_DESC_PKT_TYPE_SET(_var, _val)            \
+    do {                                                \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_PKT_TYPE, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_PKT_TYPE_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_VDEV_ID_GET(_var) \
+    (((_var) & HTT_TX_DESC_VDEV_ID_M) >> HTT_TX_DESC_VDEV_ID_S)
+#define HTT_TX_DESC_VDEV_ID_SET(_var, _val)            \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_VDEV_ID, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_VDEV_ID_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_EXT_TID_GET(_var) \
+    (((_var) & HTT_TX_DESC_EXT_TID_M) >> HTT_TX_DESC_EXT_TID_S)
+#define HTT_TX_DESC_EXT_TID_SET(_var, _val)            \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_EXT_TID, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_EXT_TID_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_POSTPONED_GET(_var) \
+    (((_var) & HTT_TX_DESC_POSTPONED_M) >> HTT_TX_DESC_POSTPONED_S)
+#define HTT_TX_DESC_POSTPONED_SET(_var, _val)            \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_POSTPONED, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_POSTPONED_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_EXTENSION_GET(_var) \
+    (((_var) & HTT_TX_DESC_EXTENSION_M) >> HTT_TX_DESC_EXTENSION_S)
+#define HTT_TX_DESC_EXTENSION_SET(_var, _val)            \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_EXTENSION, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_EXTENSION_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_FRM_LEN_GET(_var) \
+    (((_var) & HTT_TX_DESC_FRM_LEN_M) >> HTT_TX_DESC_FRM_LEN_S)
+#define HTT_TX_DESC_FRM_LEN_SET(_var, _val)            \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_FRM_LEN, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_FRM_LEN_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_FRM_ID_GET(_var) \
+    (((_var) & HTT_TX_DESC_FRM_ID_M) >> HTT_TX_DESC_FRM_ID_S)
+#define HTT_TX_DESC_FRM_ID_SET(_var, _val)            \
+    do {                                              \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_FRM_ID, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_FRM_ID_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_CKSUM_OFFLOAD_GET(_var) \
+    (((_var) & HTT_TX_DESC_CKSUM_OFFLOAD_M) >> HTT_TX_DESC_CKSUM_OFFLOAD_S)
+#define HTT_TX_DESC_CKSUM_OFFLOAD_SET(_var, _val)            \
+    do {                                              \
+        HTT_CHECK_SET_VAL(HTT_TX_DESC_CKSUM_OFFLOAD, _val);  \
+        ((_var) |= ((_val) << HTT_TX_DESC_CKSUM_OFFLOAD_S)); \
+    } while (0)
+
+#define HTT_TX_DESC_TX_COMP_GET(_var) \
+    (((_var) & HTT_TX_DESC_TX_COMP_M) >> HTT_TX_DESC_TX_COMP_S)
+#define HTT_TX_DESC_TX_COMP_SET(_var, _val)             \
+     do {                                               \
+         HTT_CHECK_SET_VAL(HTT_TX_DESC_TX_COMP, _val);  \
+         ((_var) |= ((_val) << HTT_TX_DESC_TX_COMP_S)); \
+     } while (0)
+
+#define HTT_TX_DESC_PEER_ID_GET(_var) \
+    (((_var) & HTT_TX_DESC_PEER_ID_M) >> HTT_TX_DESC_PEER_ID_S)
+#define HTT_TX_DESC_PEER_ID_SET(_var, _val)             \
+     do {                                               \
+         HTT_CHECK_SET_VAL(HTT_TX_DESC_PEER_ID, _val);  \
+         ((_var) |= ((_val) << HTT_TX_DESC_PEER_ID_S)); \
+     } while (0)
+
+#define HTT_TX_DESC_CHAN_FREQ_GET(_var) \
+    (((_var) & HTT_TX_DESC_CHAN_FREQ_M) >> HTT_TX_DESC_CHAN_FREQ_S)
+#define HTT_TX_DESC_CHAN_FREQ_SET(_var, _val)             \
+     do {                                               \
+         HTT_CHECK_SET_VAL(HTT_TX_DESC_CHAN_FREQ, _val);  \
+         ((_var) |= ((_val) << HTT_TX_DESC_CHAN_FREQ_S)); \
+     } while (0)
+
+
+/* enums used in the HTT tx MSDU extension descriptor */
+enum {
+    htt_tx_guard_interval_regular = 0,
+    htt_tx_guard_interval_short   = 1,
+};
+
+enum {
+    htt_tx_preamble_type_ofdm = 0,
+    htt_tx_preamble_type_cck  = 1,
+    htt_tx_preamble_type_ht   = 2,
+    htt_tx_preamble_type_vht  = 3,
+};
+
+enum {
+    htt_tx_bandwidth_5MHz   = 0,
+    htt_tx_bandwidth_10MHz  = 1,
+    htt_tx_bandwidth_20MHz  = 2,
+    htt_tx_bandwidth_40MHz  = 3,
+    htt_tx_bandwidth_80MHz  = 4,
+    htt_tx_bandwidth_160MHz = 5, /* includes 80+80 */
+};
+
+/**
+ * @brief HTT tx MSDU extension descriptor
+ * @details
+ *  If the target supports HTT tx MSDU extension descriptors, the host has
+ *  the option of appending the following struct following the regular
+ *  HTT tx MSDU descriptor (and setting the "extension" flag in the regular
+ *  HTT tx MSDU descriptor, to show that the extension descriptor is present).
+ *  The HTT tx MSDU extension descriptors allows the host to provide detailed
+ *  tx specs for each frame.
+ */
+PREPACK struct htt_tx_msdu_desc_ext_t {
+    /* DWORD 0: flags */
+    A_UINT32
+        valid_pwr:            1, /* bit 0: if set, tx pwr spec is valid */
+        valid_mcs_mask:       1, /* bit 1: if set, tx MCS mask spec is valid */
+        valid_nss_mask:       1, /* bit 2: if set, tx Nss mask spec is valid */
+        valid_guard_interval: 1, /* bit 3: if set, tx guard intv spec is valid*/
+        valid_preamble_type_mask: 1, /* 4: if set, tx preamble mask is valid */
+        valid_chainmask:      1, /* bit 5: if set, tx chainmask spec is valid */
+        valid_retries:        1, /* bit 6: if set, tx retries spec is valid */
+        valid_bandwidth:      1, /* bit 7: if set, tx bandwidth spec is valid */
+        valid_expire_tsf:     1, /* bit 8: if set, tx expire TSF spec is valid*/
+        is_dsrc:              1, /* bit 9: if set, MSDU is a DSRC frame */
+        reserved0_31_7:      22; /* bits 31:10 - unused, set to 0x0 */
+
+    /* DWORD 1: tx power, tx rate, tx BW */
+    A_UINT32
+        /* pwr -
+         * Specify what power the tx frame needs to be transmitted at.
+         * The power a signed (two's complement) value is in units of 0.5 dBm.
+         * The value needs to be appropriately sign-extended when extracting
+         * the value from the message and storing it in a variable that is
+         * larger than A_INT8.  (The HTT_TX_MSDU_EXT_DESC_FLAG_PWR_GET macro
+         * automatically handles this sign-extension.)
+         * If the transmission uses multiple tx chains, this power spec is
+         * the total transmit power, assuming incoherent combination of
+         * per-chain power to produce the total power.
+         */
+        pwr: 8,
+
+        /* mcs_mask -
+         * Specify the allowable values for MCS index (modulation and coding)
+         * to use for transmitting the frame.
+         *
+         * For HT / VHT preamble types, this mask directly corresponds to
+         * the HT or VHT MCS indices that are allowed.  For each bit N set
+         * within the mask, MCS index N is allowed for transmitting the frame.
+         * For legacy CCK and OFDM rates, separate bits are provided for CCK
+         * rates versus OFDM rates, so the host has the option of specifying
+         * that the target must transmit the frame with CCK or OFDM rates
+         * (not HT or VHT), but leaving the decision to the target whether
+         * to use CCK or OFDM.
+         *
+         * For CCK and OFDM, the bits within this mask are interpreted as
+         * follows:
+         *     bit  0 -> CCK 1 Mbps rate is allowed
+         *     bit  1 -> CCK 2 Mbps rate is allowed
+         *     bit  2 -> CCK 5.5 Mbps rate is allowed
+         *     bit  3 -> CCK 11 Mbps rate is allowed
+         *     bit  4 -> OFDM BPSK modulation, 1/2 coding rate is allowed
+         *     bit  5 -> OFDM BPSK modulation, 3/4 coding rate is allowed
+         *     bit  6 -> OFDM QPSK modulation, 1/2 coding rate is allowed
+         *     bit  7 -> OFDM QPSK modulation, 3/4 coding rate is allowed
+         *     bit  8 -> OFDM 16-QAM modulation, 1/2 coding rate is allowed
+         *     bit  9 -> OFDM 16-QAM modulation, 3/4 coding rate is allowed
+         *     bit 10 -> OFDM 64-QAM modulation, 2/3 coding rate is allowed
+         *     bit 11 -> OFDM 64-QAM modulation, 3/4 coding rate is allowed
+         *
+         * The MCS index specification needs to be compatible with the
+         * bandwidth mask specification.  For example, a MCS index == 9
+         * specification is inconsistent with a preamble type == VHT,
+         * Nss == 1, and channel bandwidth == 20 MHz.
+         *
+         * Furthermore, the host has only a limited ability to specify to
+         * the target to select from HT + legacy rates, or VHT + legacy rates,
+         * since this mcs_mask can specify either HT/VHT rates or legacy rates.
+         */
+        mcs_mask: 12,
+
+        /* nss_mask -
+         * Specify which numbers of spatial streams (MIMO factor) are permitted.
+         * Each bit in this mask corresponds to a Nss value:
+         *     bit 0: if set, Nss = 1 (non-MIMO) is permitted
+         *     bit 1: if set, Nss = 2 (2x2 MIMO) is permitted
+         *     bit 2: if set, Nss = 3 (3x3 MIMO) is permitted
+         *     bit 3: if set, Nss = 4 (4x4 MIMO) is permitted
+         * The values in the Nss mask must be suitable for the recipient, e.g.
+         * a value of 0x4 (Nss = 3) cannot be specified for a tx frame to a
+         * recipient which only supports 2x2 MIMO.
+         */
+        nss_mask: 4,
+
+        /* guard_interval -
+         * Specify a htt_tx_guard_interval enum value to indicate whether
+         * the transmission should use a regular guard interval or a
+         * short guard interval.
+         */
+        guard_interval: 1,
+
+        /* preamble_type_mask -
+         * Specify which preamble types (CCK, OFDM, HT, VHT) the target
+         * may choose from for transmitting this frame.
+         * The bits in this mask correspond to the values in the
+         * htt_tx_preamble_type enum.  For example, to allow the target
+         * to transmit the frame as either CCK or OFDM, this field would
+         * be set to
+         *     (1 << htt_tx_preamble_type_ofdm) |
+         *     (1 << htt_tx_preamble_type_cck)
+         */
+        preamble_type_mask: 4,
+
+        reserved1_31_29: 3; /* unused, set to 0x0 */
+
+    /* DWORD 2: tx chain mask, tx retries */
+    A_UINT32
+        /* chain_mask - specify which chains to transmit from */
+        chain_mask: 4,
+
+        /* retry_limit -
+         * Specify the maximum number of transmissions, including the
+         * initial transmission, to attempt before giving up if no ack
+         * is received.
+         * If the tx rate is specified, then all retries shall use the
+         * same rate as the initial transmission.
+         * If no tx rate is specified, the target can choose whether to
+         * retain the original rate during the retransmissions, or to
+         * fall back to a more robust rate.
+         */
+        retry_limit: 4,
+
+        /* bandwidth_mask -
+         * Specify what channel widths may be used for the transmission.
+         * A value of zero indicates "don't care" - the target may choose
+         * the transmission bandwidth.
+         * The bits within this mask correspond to the htt_tx_bandwidth
+         * enum values - bit 0 is for 5 MHz, bit 1 is for 10 MHz, etc.
+         * The bandwidth_mask must be consistent with the preamble_type_mask
+         * and mcs_mask specs, if they are provided.  For example, 80 MHz and
+         * 160 MHz can only be enabled in the mask if preamble_type == VHT.
+         */
+        bandwidth_mask: 6,
+
+        reserved2_31_14: 18; /* unused, set to 0x0 */
+
+    /* DWORD 3: tx expiry time (TSF) LSBs */
+    A_UINT32 expire_tsf_lo;
+
+    /* DWORD 4: tx expiry time (TSF) MSBs */
+    A_UINT32 expire_tsf_hi;
+
+    A_UINT32 reserved_for_future_expansion_set_to_zero[3];
+} POSTPACK;
+
+/* DWORD 0 */
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_M                0x00000001
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_S                0
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_M           0x00000002
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_S           1
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_NSS_MASK_M           0x00000004
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_NSS_MASK_S           2
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_M     0x00000008
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_S     3
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_M 0x00000010
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_S 4
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_M         0x00000020
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_S         5
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_M            0x00000040
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_S            6
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_M          0x00000080
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_S          7
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_M        0x00000100
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_S        8
+#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_M                  0x00000200
+#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_S                  9
+
+/* DWORD 1 */
+#define HTT_TX_MSDU_EXT_DESC_PWR_M                           0x000000ff
+#define HTT_TX_MSDU_EXT_DESC_PWR_S                           0
+#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_M                      0x000fff00
+#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_S                      8
+#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_M                      0x00f00000
+#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_S                      20
+#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_M                0x01000000
+#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_S                24
+#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_M            0x1c000000
+#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_S            25
+
+/* DWORD 2 */
+#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_M                    0x0000000f
+#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_S                    0
+#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_M                   0x000000f0
+#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_S                   4
+#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_M                0x00003f00
+#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_S                8
+
+
+/* DWORD 0 */
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL( \
+             HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL, _val); \
+         ((_var) |= ((_val) \
+             << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL( \
+             HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK, _val); \
+         ((_var) |= ((_val) \
+             << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_S));\
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_M) >> \
+    HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_S)
+#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_S)); \
+     } while (0)
+
+
+/* DWORD 1 */
+#define HTT_TX_MSDU_EXT_DESC_PWR_GET_BASE(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_PWR_M) >> \
+    HTT_TX_MSDU_EXT_DESC_PWR_S)
+#define HTT_TX_MSDU_EXT_DESC_PWR_GET(_var) \
+    (HTT_TX_MSDU_EXT_DESC_PWR_GET_BASE(_var)  | \
+    HTT_SIGN_BIT_EXTENSION_MASK(_var, HTT_TX_MSDU_EXT_DESC_PWR))
+#define HTT_TX_MSDU_EXT_DESC_PWR_SET(_var, _val) \
+    ((_var) |= (((_val) << HTT_TX_MSDU_EXT_DESC_PWR_S)) & \
+    HTT_TX_MSDU_EXT_DESC_PWR_M)
+
+#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_MCS_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_MCS_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_MCS_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_MCS_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_NSS_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_NSS_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_NSS_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_NSS_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_M) >> \
+    HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_S)
+#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_S)); \
+     } while (0)
+
+
+/* DWORD 2 */
+#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_CHAIN_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_M) >> \
+    HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_S)
+#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_M) >> \
+    HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_S)
+#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_S)); \
+     } while (0)
+
+
+typedef enum {
+    HTT_11AX_HE_LTF_SUBTYPE_1X,
+    HTT_11AX_HE_LTF_SUBTYPE_2X,
+    HTT_11AX_HE_LTF_SUBTYPE_4X,
+} htt_11ax_ltf_subtype_t;
+
+typedef enum {
+    HTT_TX_MSDU_EXT2_DESC_PREAM_OFDM,
+    HTT_TX_MSDU_EXT2_DESC_PREAM_CCK,
+    HTT_TX_MSDU_EXT2_DESC_PREAM_HT ,
+    HTT_TX_MSDU_EXT2_DESC_PREAM_VHT,
+    HTT_TX_MSDU_EXT2_DESC_PREAM_HE_SU,
+    HTT_TX_MSDU_EXT2_DESC_PREAM_HE_EXT_SU,
+} htt_tx_ext2_preamble_type_t;
+
+#define HTT_TX_MSDU_EXT2_DESC_BW_5MHZ_M      0x00000001
+#define HTT_TX_MSDU_EXT2_DESC_BW_5MHZ_S      0
+#define HTT_TX_MSDU_EXT2_DESC_BW_10MHZ_M     0x00000002
+#define HTT_TX_MSDU_EXT2_DESC_BW_10MHZ_S     1
+#define HTT_TX_MSDU_EXT2_DESC_BW_20MHZ_M     0x00000004
+#define HTT_TX_MSDU_EXT2_DESC_BW_20MHZ_S     2
+#define HTT_TX_MSDU_EXT2_DESC_BW_40MHZ_M     0x00000008
+#define HTT_TX_MSDU_EXT2_DESC_BW_40MHZ_S     3
+#define HTT_TX_MSDU_EXT2_DESC_BW_80MHZ_M     0x00000010
+#define HTT_TX_MSDU_EXT2_DESC_BW_80MHZ_S     4
+#define HTT_TX_MSDU_EXT2_DESC_BW_160MHZ_M    0x00000020
+#define HTT_TX_MSDU_EXT2_DESC_BW_160MHZ_S    5
+
+/**
+ * @brief HTT tx MSDU extension descriptor v2
+ * @details
+ *  In Lithium, if htt_tx_tcl_metadata->valid_htt_ext is set, this structure
+ *  is received as tcl_exit_base->host_meta_info in firmware.
+ *  Also there is no htt_tx_msdu_desc_t in Lithium since most of those fields
+ *  are already part of tcl_exit_base.
+ */
+PREPACK struct htt_tx_msdu_desc_ext2_t {
+    /* DWORD 0: flags */
+    A_UINT32
+        valid_pwr            : 1, /*  if set, tx pwr spec is valid */
+        valid_mcs_mask       : 1, /*  if set, tx MCS mask is valid */
+        valid_nss_mask       : 1, /*  if set, tx Nss mask is valid */
+        valid_preamble_type  : 1, /*  if set, tx preamble spec is valid */
+        valid_retries        : 1, /*  if set, tx retries spec is valid */
+        valid_bw_info        : 1, /*  if set, tx dyn_bw and bw_mask are valid */
+        valid_guard_interval : 1, /*  if set, tx guard intv spec is valid */
+        valid_chainmask      : 1, /*  if set, tx chainmask is valid */
+        valid_encrypt_type   : 1, /*  if set, encrypt type is valid */
+        valid_key_flags      : 1, /*  if set, key flags is valid */
+        valid_expire_tsf     : 1, /*  if set, tx expire TSF spec is valid */
+        valid_chanfreq       : 1, /*  if set, chanfreq is valid */
+        is_dsrc              : 1, /*  if set, MSDU is a DSRC frame */
+        guard_interval       : 2, /*  0.4us, 0.8us, 1.6us, 3.2us */
+        encrypt_type         : 2, /*  0 = NO_ENCRYPT,
+                                      1 = ENCRYPT,
+                                      2 ~ 3 - Reserved */
+        /* retry_limit -
+         * Specify the maximum number of transmissions, including the
+         * initial transmission, to attempt before giving up if no ack
+         * is received.
+         * If the tx rate is specified, then all retries shall use the
+         * same rate as the initial transmission.
+         * If no tx rate is specified, the target can choose whether to
+         * retain the original rate during the retransmissions, or to
+         * fall back to a more robust rate.
+         */
+        retry_limit          : 4,
+        use_dcm_11ax         : 1, /* If set, Use Dual subcarrier modulation.
+                                   * Valid only for 11ax preamble types HE_SU
+                                   * and HE_EXT_SU
+                                   */
+        ltf_subtype_11ax     : 2, /* Takes enum values of htt_11ax_ltf_subtype_t
+                                   * Valid only for 11ax preamble types HE_SU
+                                   * and HE_EXT_SU
+                                   */
+        dyn_bw               : 1, /* 0 = static bw, 1 = dynamic bw */
+        bw_mask              : 6, /* Valid only if dyn_bw == 0 (static bw).
+                                   * (Bit mask of 5, 10, 20, 40, 80, 160Mhz.
+                                   * Refer to HTT_TX_MSDU_EXT2_DESC_BW defs.)
+                                   */
+        reserved0_31         : 1;
+
+    /* DWORD 1: tx power, tx rate */
+    A_UINT32
+        power                : 8,   /* unit of the power field is 0.5 dbm
+                                     * similar to pwr field in htt_tx_msdu_desc_ext_t
+                                     * signed value ranging from -64dbm to 63.5 dbm
+                                     */
+        mcs_mask             : 12,  /* mcs bit mask of 0 ~ 11
+                                     * Setting more than one MCS isn't currently
+                                     * supported by the target (but is supported
+                                     * in the interface in case in the future
+                                     * the target supports specifications of
+                                     * a limited set of MCS values.
+                                     */
+        nss_mask             : 8,   /* Nss bit mask 0 ~ 7
+                                     * Setting more than one Nss isn't currently
+                                     * supported by the target (but is supported
+                                     * in the interface in case in the future
+                                     * the target supports specifications of
+                                     * a limited set of Nss values.
+                                     */
+        pream_type           : 3,   /* Takes enum values of htt_tx_ext2_preamble_type_t */
+        reserved1_31         : 1;
+
+    /* DWORD 2: tx chain mask, tx retries */
+    A_UINT32
+        /* chain_mask - specify which chains to transmit from */
+        chain_mask         : 8,
+
+        key_flags          : 8,  /* Key Index and related flags - used in mesh mode
+                                  * TODO: Update Enum values for key_flags
+                                  */
+
+        /*
+         * Channel frequency: This identifies the desired channel
+         * frequency (in MHz) for tx frames. This is used by FW to help
+         * determine when it is safe to transmit or drop frames for
+         * off-channel operation.
+         * The default value of zero indicates to FW that the corresponding
+         * VDEV's home channel (if there is one) is the desired channel
+         * frequency.
+         */
+        chanfreq           : 16;
+
+    /* DWORD 3: tx expiry time (TSF) LSBs */
+    A_UINT32 expire_tsf_lo;
+
+    /* DWORD 4: tx expiry time (TSF) MSBs */
+    A_UINT32 expire_tsf_hi;
+} POSTPACK;
+
+/* DWORD 0 */
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_M                0x00000001
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_S                0
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_M           0x00000002
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_S           1
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_M           0x00000004
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_S           2
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_M      0x00000008
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_S      3
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_M            0x00000010
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_S            4
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_M            0x00000020
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_S            5
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_M     0x00000040
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_S     6
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_M         0x00000080
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_S         7
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_M       0x00000100
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_S       8
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_M          0x00000200
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_S          9
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_M        0x00000400
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_S        10
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_M           0x00000800
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_S           11
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_M                  0x00001000
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_S                  12
+#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_M                0x00006000
+#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_S                13
+#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_M                  0x00018000
+#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_S                  15
+#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_M                   0x001e0000
+#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_S                   17
+#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_M                  0x00200000
+#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_S                  21
+#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_M              0x00c00000
+#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_S              22
+#define HTT_TX_MSDU_EXT2_DESC_DYN_BW_M                        0x01000000
+#define HTT_TX_MSDU_EXT2_DESC_DYN_BW_S                        24
+#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_M                       0x7e000000
+#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_S                       25
+
+/* DWORD 1 */
+#define HTT_TX_MSDU_EXT2_DESC_PWR_M                           0x000000ff
+#define HTT_TX_MSDU_EXT2_DESC_PWR_S                           0
+#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_M                      0x000fff00
+#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_S                      8
+#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_M                      0x0ff00000
+#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_S                      20
+#define HTT_TX_MSDU_EXT2_DESC_PREAM_TYPE_M                    0x70000000
+#define HTT_TX_MSDU_EXT2_DESC_PREAM_TYPE_S                    28
+
+/* DWORD 2 */
+#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_M                    0x000000ff
+#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_S                    0
+#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_M                     0x0000ff00
+#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_S                     8
+#define HTT_TX_MSDU_EXT_DESC_CHANFREQ_M                       0xffff0000
+#define HTT_TX_MSDU_EXT_DESC_CHANFREQ_S                       16
+
+/* DWORD 0 */
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL( \
+             HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE, _val); \
+         ((_var) |= ((_val) \
+             << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL( \
+             HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL, _val); \
+         ((_var) |= ((_val) \
+             << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_S));\
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_S));\
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_S));\
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_S)
+#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_S)
+#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_S)
+#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_S)
+#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_S)
+#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_S)
+#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_BW_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_BW_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_BW_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_BW_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_S)); \
+     } while (0)
+
+
+/* DWORD 1 */
+#define HTT_TX_MSDU_EXT2_DESC_PWR_GET_BASE(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_PWR_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_PWR_S)
+#define HTT_TX_MSDU_EXT2_DESC_PWR_GET(_var) \
+    (HTT_TX_MSDU_EXT2_DESC_PWR_GET_BASE(_var)  | \
+    HTT_SIGN_BIT_EXTENSION_MASK(_var, HTT_TX_MSDU_EXT2_DESC_PWR))
+#define HTT_TX_MSDU_EXT2_DESC_PWR_SET(_var, _val) \
+    ((_var) |= (((_val) << HTT_TX_MSDU_EXT2_DESC_PWR_S)) & \
+    HTT_TX_MSDU_EXT2_DESC_PWR_M)
+
+#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_MCS_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_MCS_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_MCS_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_MCS_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_NSS_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_NSS_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_NSS_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_NSS_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_S)
+#define HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_S)); \
+     } while (0)
+
+/* DWORD 2 */
+#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_S)
+#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_S)
+#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_S)); \
+     } while (0)
+
+#define HTT_TX_MSDU_EXT2_DESC_CHANFREQ_GET(_var) \
+    (((_var) & HTT_TX_MSDU_EXT2_DESC_CHANFREQ_MASK_M) >> \
+    HTT_TX_MSDU_EXT2_DESC_CHANFREQ_S)
+#define HTT_TX_MSDU_EXT2_DESC_CHANFREQ_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_CHANFREQ, _val); \
+         ((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_CHANFREQ_S)); \
+     } while (0)
+
+
+typedef enum {
+    HTT_TCL_METADATA_TYPE_PEER_BASED = 0,
+    HTT_TCL_METADATA_TYPE_VDEV_BASED = 1,
+} htt_tcl_metadata_type;
+
+/**
+ * @brief HTT TCL command number format
+ * @details
+ *  This structure is passed from host as tcl_data_cmd->tcl_cmd_number and
+ *  available to firmware as tcl_exit_base->tcl_status_number.
+ *  For regular / multicast packets host will send vdev and mac id and for
+ *  NAWDS packets, host will send peer id.
+ *  A_UINT32 is used to avoid endianness conversion problems.
+ *  tcl_status_number size is 16 bits, hence only 16 bits can be used.
+ */
+
+typedef struct {
+    A_UINT32
+        type: 1, /* vdev_id based or peer_id based */
+        rsvd: 31;
+} htt_tx_tcl_vdev_or_peer_t;
+
+typedef struct {
+    A_UINT32
+        type:          1, /* vdev_id based or peer_id based */
+        valid_htt_ext: 1, /* If set, tcl_exit_base->host_meta_info is valid */
+        vdev_id:       8,
+        pdev_id:       2,
+        rsvd:          20;
+} htt_tx_tcl_vdev_metadata;
+
+typedef struct {
+    A_UINT32
+        type:          1, /* vdev_id based or peer_id based */
+        valid_htt_ext: 1, /* If set, tcl_exit_base->host_meta_info is valid */
+        peer_id:       14,
+        rsvd:          16;
+} htt_tx_tcl_peer_metadata;
+
+PREPACK struct htt_tx_tcl_metadata {
+    union {
+        htt_tx_tcl_vdev_or_peer_t vdev_or_peer;
+        htt_tx_tcl_vdev_metadata vdev_meta;
+        htt_tx_tcl_peer_metadata peer_meta;
+    };
+} POSTPACK;
+
+/* DWORD 0 */
+#define HTT_TX_TCL_METADATA_TYPE_M                0x00000001
+#define HTT_TX_TCL_METADATA_TYPE_S                0
+#define HTT_TX_TCL_METADATA_VALID_HTT_M           0x00000002
+#define HTT_TX_TCL_METADATA_VALID_HTT_S           1
+#define HTT_TX_TCL_METADATA_VDEV_ID_M             0x000003fc
+#define HTT_TX_TCL_METADATA_VDEV_ID_S             2
+#define HTT_TX_TCL_METADATA_PDEV_ID_M             0x00000c00
+#define HTT_TX_TCL_METADATA_PDEV_ID_S             10
+#define HTT_TX_TCL_METADATA_PEER_ID_M             0x0000fffc
+#define HTT_TX_TCL_METADATA_PEER_ID_S             2
+
+#define HTT_TX_TCL_METADATA_TYPE_GET(_var) \
+    (((_var) & HTT_TX_TCL_METADATA_TYPE_M) >> \
+    HTT_TX_TCL_METADATA_TYPE_S)
+#define HTT_TX_TCL_METADATA_TYPE_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_TYPE, _val); \
+         ((_var) |= ((_val) << HTT_TX_TCL_METADATA_TYPE_S)); \
+     } while (0)
+
+#define HTT_TX_TCL_METADATA_VALID_HTT_GET(_var) \
+    (((_var) & HTT_TX_TCL_METADATA_VALID_HTT_M) >> \
+    HTT_TX_TCL_METADATA_VALID_HTT_S)
+#define HTT_TX_TCL_METADATA_VALID_HTT_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_VALID_HTT, _val); \
+         ((_var) |= ((_val) << HTT_TX_TCL_METADATA_VALID_HTT_S)); \
+     } while (0)
+
+#define HTT_TX_TCL_METADATA_VDEV_ID_GET(_var) \
+    (((_var) & HTT_TX_TCL_METADATA_VDEV_ID_M) >> \
+    HTT_TX_TCL_METADATA_VDEV_ID_S)
+#define HTT_TX_TCL_METADATA_VDEV_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_VDEV_ID, _val); \
+         ((_var) |= ((_val) << HTT_TX_TCL_METADATA_VDEV_ID_S)); \
+     } while (0)
+
+#define HTT_TX_TCL_METADATA_PDEV_ID_GET(_var) \
+    (((_var) & HTT_TX_TCL_METADATA_PDEV_ID_M) >> \
+    HTT_TX_TCL_METADATA_PDEV_ID_S)
+#define HTT_TX_TCL_METADATA_PDEV_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_PDEV_ID, _val); \
+         ((_var) |= ((_val) << HTT_TX_TCL_METADATA_PDEV_ID_S)); \
+     } while (0)
+
+#define HTT_TX_TCL_METADATA_PEER_ID_GET(_var) \
+    (((_var) & HTT_TX_TCL_METADATA_PEER_ID_M) >> \
+    HTT_TX_TCL_METADATA_PEER_ID_S)
+#define HTT_TX_TCL_METADATA_PEER_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_PEER_ID, _val); \
+         ((_var) |= ((_val) << HTT_TX_TCL_METADATA_PEER_ID_S)); \
+     } while (0)
+
+
+typedef enum {
+   HTT_TX_FW2WBM_TX_STATUS_OK,
+   HTT_TX_FW2WBM_TX_STATUS_DROP,
+   HTT_TX_FW2WBM_TX_STATUS_TTL,
+   HTT_TX_FW2WBM_TX_STATUS_REINJECT,
+   HTT_TX_FW2WBM_TX_STATUS_INSPECT,
+
+   HTT_TX_FW2WBM_TX_STATUS_MAX
+} htt_tx_fw2wbm_tx_status_t;
+
+typedef enum {
+   HTT_TX_FW2WBM_REINJECT_REASON_EAPOL_ENCAP_EXP,
+   HTT_TX_FW2WBM_REINJECT_REASON_INJECT_VIA_EXP,
+   HTT_TX_FW2WBM_REINJECT_REASON_MCAST,
+   HTT_TX_FW2WBM_REINJECT_REASON_ARP,
+   HTT_TX_FW2WBM_REINJECT_REASON_DHCP,
+
+   HTT_TX_FW2WBM_REINJECT_REASON_MAX,
+} htt_tx_fw2wbm_reinject_reason_t;
+
+/**
+ * @brief HTT TX WBM Completion from firmware to host
+ * @details
+ *  This structure is passed from firmware to host overlayed on wbm_release_ring
+ *  DWORD 3 and 4 for software based completions (Exception frames and
+ *  TQM bypass frames)
+ *  For software based completions, wbm_release_ring->release_source_module will
+ *  be set to release_source_fw
+ */
+PREPACK struct htt_tx_wbm_completion {
+    A_UINT32
+        sch_cmd_id:      24,
+        exception_frame: 1, /* If set, this packet was queued via exception path */
+        rsvd0_31_25:     7;
+
+    A_UINT32
+        ack_frame_rssi:  8,  /* If this frame is removed as the result of the
+                              * reception of an ACK or BA, this field indicates
+                              * the RSSI of the received ACK or BA frame.
+                              * When the frame is removed as result of a direct
+                              * remove command from the SW,  this field is set
+                              * to 0x0 (which is never a valid value when real
+                              * RSSI is available).
+                              * Units: dB w.r.t noise floor
+                              */
+        tx_status:       4, /* Takes enum values of htt_tx_fw2wbm_tx_status_t */
+        reinject_reason: 4, /* Takes enum values of htt_tx_fw2wbm_reinject_reason_t */
+        rsvd1_31_16:     16;
+} POSTPACK;
+
+/* DWORD 0 */
+#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_M                0x00ffffff
+#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_S                0
+#define HTT_TX_WBM_COMPLETION_EXP_FRAME_M                 0x01000000
+#define HTT_TX_WBM_COMPLETION_EXP_FRAME_S                 24
+
+/* DWORD 1 */
+#define HTT_TX_WBM_COMPLETION_ACK_RSSI_M                  0x000000ff
+#define HTT_TX_WBM_COMPLETION_ACK_RSSI_S                  0
+#define HTT_TX_WBM_COMPLETION_TX_STATUS_M                 0x00000f00
+#define HTT_TX_WBM_COMPLETION_TX_STATUS_S                 8
+#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_M           0x0000f000
+#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_S           12
+
+/* DWORD 0 */
+#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_GET(_var) \
+    (((_var) & HTT_TX_WBM_COMPLETION_SCH_CMD_ID_M) >> \
+    HTT_TX_WBM_COMPLETION_SCH_CMD_ID_S)
+#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_SCH_CMD_ID, _val); \
+         ((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_SCH_CMD_ID_S)); \
+     } while (0)
+
+#define HTT_TX_WBM_COMPLETION_EXP_FRAME_GET(_var) \
+    (((_var) & HTT_TX_WBM_COMPLETION_EXP_FRAME_M) >> \
+    HTT_TX_WBM_COMPLETION_EXP_FRAME_S)
+#define HTT_TX_WBM_COMPLETION_EXP_FRAME_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_EXP_FRAME, _val); \
+         ((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_EXP_FRAME_S)); \
+     } while (0)
+
+/* DWORD 1 */
+#define HTT_TX_WBM_COMPLETION_ACK_RSSI_GET(_var) \
+    (((_var) & HTT_TX_WBM_COMPLETION_ACK_RSSI_M) >> \
+    HTT_TX_WBM_COMPLETION_ACK_RSSI_S)
+#define HTT_TX_WBM_COMPLETION_ACK_RSSI_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_ACK_RSSI, _val); \
+         ((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_ACK_RSSI_S)); \
+     } while (0)
+
+#define HTT_TX_WBM_COMPLETION_TX_STATUS_GET(_var) \
+    (((_var) & HTT_TX_WBM_COMPLETION_TX_STATUS_M) >> \
+    HTT_TX_WBM_COMPLETION_TX_STATUS_S)
+#define HTT_TX_WBM_COMPLETION_TX_STATUS_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_TX_STATUS, _val); \
+         ((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_TX_STATUS_S)); \
+     } while (0)
+
+#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_GET(_var) \
+    (((_var) & HTT_TX_WBM_COMPLETION_REINJECT_REASON_M) >> \
+    HTT_TX_WBM_COMPLETION_REINJECT_REASON_S)
+#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_REINJECT_REASON, _val); \
+         ((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_REINJECT_REASON_S)); \
+     } while (0)
+
+
+typedef enum {
+    TX_FLOW_PRIORITY_BE,
+    TX_FLOW_PRIORITY_HIGH,
+    TX_FLOW_PRIORITY_LOW,
+} htt_tx_flow_priority_t;
+
+typedef enum {
+    TX_FLOW_LATENCY_SENSITIVE,
+    TX_FLOW_LATENCY_INSENSITIVE,
+} htt_tx_flow_latency_t;
+
+typedef enum {
+    TX_FLOW_BEST_EFFORT_TRAFFIC,
+    TX_FLOW_INTERACTIVE_TRAFFIC,
+    TX_FLOW_PERIODIC_TRAFFIC,
+    TX_FLOW_BURSTY_TRAFFIC,
+    TX_FLOW_OVER_SUBSCRIBED_TRAFFIC,
+} htt_tx_flow_traffic_pattern_t;
+
+/**
+ * @brief HTT TX Flow search metadata format
+ * @details
+ *  Host will set this metadata in flow table's flow search entry along with
+ *  to_tqm_if_m0_fw. It indicates to forward the first MSDU to both the
+ *  firmware and TQM ring if the flow search entry wins.
+ *  This metadata is available to firmware in that first MSDU's
+ *  tcl_exit_base->meta_data_fse. Firmware uses this metadata to map a new flow
+ *  to one of the available flows for specific tid and returns the tqm flow
+ *  pointer as part of htt_tx_map_flow_info message.
+ */
+PREPACK struct htt_tx_flow_metadata {
+    A_UINT32
+        rsvd0_1_0:            2,
+        tid:                  4,
+        priority:             3, /* Takes enum values of htt_tx_flow_priority_t */
+        traffic_pattern:      3, /* Takes enum values of htt_tx_flow_traffic_pattern_t */
+        tid_override:         1, /* If set, tid field in this struct is the final tid.
+                                  * Else choose final tid based on latency, priority.
+                                  */
+        dedicated_flowq:      1,  /* Dedicated flowq per 5 tuple flow. */
+        latency_sensitive:    2,  /* Takes enum values of htt_tx_flow_latency_t */
+        host_flow_identifier: 16; /* Used by host to map flow metadata with flow entry */
+} POSTPACK;
+
+/* DWORD 0 */
+#define HTT_TX_FLOW_METADATA_TID_M                      0x0000003c
+#define HTT_TX_FLOW_METADATA_TID_S                      2
+#define HTT_TX_FLOW_METADATA_PRIORITY_M                 0x000001c0
+#define HTT_TX_FLOW_METADATA_PRIORITY_S                 6
+#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_M          0x00000e00
+#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_S          9
+#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_M             0x00001000
+#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_S             12
+#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_M          0x00002000
+#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_S          13
+#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_M        0x0000c000
+#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_S        14
+#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_M             0xffff0000
+#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_S             16
+
+/* DWORD 0 */
+#define HTT_TX_FLOW_METADATA_TID_GET(_var) \
+    (((_var) & HTT_TX_FLOW_METADATA_TID_M) >> \
+    HTT_TX_FLOW_METADATA_TID_S)
+#define HTT_TX_FLOW_METADATA_TID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_TID, _val); \
+         ((_var) |= ((_val) << HTT_TX_FLOW_METADATA_TID_S)); \
+     } while (0)
+
+#define HTT_TX_FLOW_METADATA_PRIORITY_GET(_var) \
+    (((_var) & HTT_TX_FLOW_PRIORITY_M) >> \
+    HTT_TX_FLOW_METADATA_PRIORITY_S)
+#define HTT_TX_FLOW_METADATA_PRIORITY_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_PRIORITY, _val); \
+         ((_var) |= ((_val) << HTT_TX_FLOW_METADATA_PRIORITY_S)); \
+     } while (0)
+
+#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_GET(_var) \
+    (((_var) & HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_M) >> \
+    HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_S)
+#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN, _val); \
+         ((_var) |= ((_val) << HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_S)); \
+     } while (0)
+
+#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_GET(_var) \
+    (((_var) & HTT_TX_FLOW_METADATA_TID_OVERRIDE_M) >> \
+    HTT_TX_FLOW_METADATA_TID_OVERRIDE_S)
+#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_TID_OVERRIDE, _val); \
+         ((_var) |= ((_val) << HTT_TX_FLOW_METADATA_TID_OVERRIDE_S)); \
+     } while (0)
+
+#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_GET(_var) \
+    (((_var) & HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_M) >> \
+    HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_S)
+#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ, _val); \
+         ((_var) |= ((_val) << HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_S)); \
+     } while (0)
+
+#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_GET(_var) \
+    (((_var) & HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_M) >> \
+    HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_S)
+#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_FLOW_LATENCY_SENSITIVE, _val); \
+         ((_var) |= ((_val) << HTT_TX_FLOW_LATENCY_SENSITIVE_S)); \
+     } while (0)
+
+#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_GET(_var) \
+    (((_var) & HTT_TX_FLOW_METADATA_HOST_FLOW_ID_M) >> \
+    HTT_TX_FLOW_METADATA_HOST_FLOW_ID_S)
+#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_HOST_FLOW_ID, _val); \
+         ((_var) |= ((_val) << HTT_TX_FLOW_METADATA_HOST_FLOW_ID_S)); \
+     } while (0)
+
+
+/**
+ * @brief Used in HTT_H2T_MSG_TYPE_ADD_WDS_ENTRY and HTT_H2T_MSG_TYPE_DELETE_WDS_ENTRY messages
+ *
+ * @details
+ *  HTT wds entry from source port learning
+ *  Host will learn wds entries from rx and send this message to firmware
+ *  to enable firmware to configure/delete AST entries for wds clients.
+ *  Firmware creates Source address's AST entry with Transmit MAC's peer_id
+ *  and when SA's entry is deleted, firmware removes this AST entry
+ *
+ *  The message would appear as follows:
+ *
+ *     |31 30|29                   |17 16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |           rsvd0           |PDVID|     vdev_id    |    msg_type    |
+ *     |-------------------------------------------------------------------|
+ *     |                           sa_addr_31_0                            |
+ *     |-------------------------------------------------------------------|
+ *     |     |       ta_peer_id          |         sa_addr_47_32           |
+ *     |-------------------------------------------------------------------|
+ * Where PDVID = pdev_id
+ *
+ *  The message is interpreted as follows:
+ *
+ *  dword0 - b'0:7   - msg_type: This will be set to
+ *                     HTT_H2T_MSG_TYPE_ADD_WDS_ENTRY or
+ *                     HTT_H2T_MSG_TYPE_DELETE_WDS_ENTRY
+ *
+ *  dword0 - b'8:15  - vdev_id
+ *
+ *  dword0 - b'16:17 - pdev_id
+ *
+ *  dword0 - b'18:31 - rsvd10: Reserved for future use
+ *
+ *  dword1 - b'0:31  - sa_addr_31_0: Lower 32 bits of source mac address
+ *
+ *  dword2 - b'0:15  - sa_addr_47_32: Upper 16 bits of source mac address
+ *
+ *  dword2 - b'16:19 - ta_peer_id: peer id of Transmit MAC
+ */
+
+PREPACK struct htt_wds_entry {
+    A_UINT32
+        msg_type: 8,
+        vdev_id:  8,
+        pdev_id:  2,
+        rsvd0:    14;
+    A_UINT32 sa_addr_31_0;
+    A_UINT32
+        sa_addr_47_32: 16,
+        ta_peer_id:    14,
+        rsvd2:         2;
+} POSTPACK;
+
+/* DWORD 0 */
+#define HTT_WDS_ENTRY_VDEV_ID_M                0x0000ff00
+#define HTT_WDS_ENTRY_VDEV_ID_S                8
+#define HTT_WDS_ENTRY_PDEV_ID_M                0x00030000
+#define HTT_WDS_ENTRY_PDEV_ID_S                16
+
+/* DWORD 2 */
+#define HTT_WDS_ENTRY_SA_ADDR_47_32_M          0x0000ffff
+#define HTT_WDS_ENTRY_SA_ADDR_47_32_S          0
+#define HTT_WDS_ENTRY_TA_PEER_ID_M             0x3fff0000
+#define HTT_WDS_ENTRY_TA_PEER_ID_S             16
+
+/* DWORD 0 */
+#define HTT_WDS_ENTRY_VDEV_ID_GET(_var) \
+    (((_var) & HTT_WDS_ENTRY_VDEV_ID_M) >> \
+    HTT_WDS_ENTRY_VDEV_ID_S)
+#define HTT_WDS_ENTRY_VDEV_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_VDEV_ID, _val); \
+         ((_var) |= ((_val) << HTT_WDS_ENTRY_VDEV_ID_S)); \
+     } while (0)
+
+#define HTT_WDS_ENTRY_PDEV_ID_GET(_var) \
+    (((_var) & HTT_WDS_ENTRY_PDEV_ID_M) >> \
+    HTT_WDS_ENTRY_PDEV_ID_S)
+#define HTT_WDS_ENTRY_PDEV_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_PDEV_ID, _val); \
+         ((_var) |= ((_val) << HTT_WDS_ENTRY_PDEV_ID_S)); \
+     } while (0)
+
+/* DWORD 2 */
+#define HTT_WDS_ENTRY_SA_ADDR_47_32_GET(_var) \
+    (((_var) & HTT_WDS_ENTRY_SA_ADDR_47_32_M) >> \
+    HTT_WDS_ENTRY_SA_ADDR_47_32_S)
+#define HTT_WDS_ENTRY_SA_ADDR_47_32_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_SA_ADDR_47_32, _val); \
+         ((_var) |= ((_val) << HTT_WDS_ENTRY_SA_ADDR_47_32_S)); \
+     } while (0)
+
+#define HTT_WDS_ENTRY_TA_PEER_ID_GET(_var) \
+    (((_var) & HTT_WDS_ENTRY_TA_PEER_ID_M) >> \
+    HTT_WDS_ENTRY_TA_PEER_ID_S)
+#define HTT_WDS_ENTRY_TA_PEER_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_TA_PEER_ID, _val); \
+         ((_var) |= ((_val) << HTT_WDS_ENTRY_TA_PEER_ID_S)); \
+     } while (0)
+
+
+/**
+ * @brief MAC DMA rx ring setup specification
+ * @details
+ *  To allow for dynamic rx ring reconfiguration and to avoid race
+ *  conditions, the host SW never directly programs the MAC DMA rx ring(s)
+ *  it uses.  Instead, it sends this message to the target, indicating how
+ *  the rx ring used by the host should be set up and maintained.
+ *  The message consists of a 4-octet header followed by 1 or 2 rx ring setup
+ *  specifications.
+ *
+ *            |31                           16|15            8|7             0|
+ *            |---------------------------------------------------------------|
+ * header:    |            reserved           |   num rings   |    msg type   |
+ *            |---------------------------------------------------------------|
+ * payload 1: |       FW_IDX shadow register physical address (bits 31:0)     |
+#if HTT_PADDR64
+ *            |       FW_IDX shadow register physical address (bits 63:32)    |
+#endif
+ *            |---------------------------------------------------------------|
+ *            |                 rx ring base physical address (bits 31:0)     |
+#if HTT_PADDR64
+ *            |                 rx ring base physical address (bits 63:32)    |
+#endif
+ *            |---------------------------------------------------------------|
+ *            |      rx ring buffer size      |        rx ring length         |
+ *            |---------------------------------------------------------------|
+ *            |      FW_IDX initial value     |         enabled flags         |
+ *            |---------------------------------------------------------------|
+ *            |      MSDU payload offset      |     802.11 header offset      |
+ *            |---------------------------------------------------------------|
+ *            |        PPDU end offset        |       PPDU start offset       |
+ *            |---------------------------------------------------------------|
+ *            |        MPDU end offset        |       MPDU start offset       |
+ *            |---------------------------------------------------------------|
+ *            |        MSDU end offset        |       MSDU start offset       |
+ *            |---------------------------------------------------------------|
+ *            |        frag info offset       |      rx attention offset      |
+ *            |---------------------------------------------------------------|
+ * payload 2, if present, has the same format as payload 1
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as an rx ring configuration message
+ *     Value: 0x2
+ *   - NUM_RINGS
+ *     Bits 15:8
+ *     Purpose: indicates whether the host is setting up one rx ring or two
+ *     Value: 1 or 2
+ * Payload:
+ *     for systems using 64-bit format for bus addresses:
+ *       - IDX_SHADOW_REG_PADDR_LO
+ *         Bits 31:0
+ *         Value: lower 4 bytes of physical address of the host's
+ *                FW_IDX shadow register
+ *       - IDX_SHADOW_REG_PADDR_HI
+ *         Bits 31:0
+ *         Value: upper 4 bytes of physical address of the host's
+ *                FW_IDX shadow register
+ *       - RING_BASE_PADDR_LO
+ *         Bits 31:0
+ *         Value: lower 4 bytes of physical address of the host's rx ring
+ *       - RING_BASE_PADDR_HI
+ *         Bits 31:0
+ *         Value: uppper 4 bytes of physical address of the host's rx ring
+ *     for systems using 32-bit format for bus addresses:
+ *       - IDX_SHADOW_REG_PADDR
+ *         Bits 31:0
+ *         Value: physical address of the host's FW_IDX shadow register
+ *       - RING_BASE_PADDR
+ *         Bits 31:0
+ *         Value: physical address of the host's rx ring
+ *   - RING_LEN
+ *     Bits 15:0
+ *     Value: number of elements in the rx ring
+ *   - RING_BUF_SZ
+ *     Bits 31:16
+ *     Value: size of the buffers referenced by the rx ring, in byte units
+ *   - ENABLED_FLAGS
+ *     Bits 15:0
+ *     Value: 1-bit flags to show whether different rx fields are enabled
+ *         bit  0: 802.11 header enabled (1) or disabled (0)
+ *         bit  1: MSDU payload  enabled (1) or disabled (0)
+ *         bit  2: PPDU start    enabled (1) or disabled (0)
+ *         bit  3: PPDU end      enabled (1) or disabled (0)
+ *         bit  4: MPDU start    enabled (1) or disabled (0)
+ *         bit  5: MPDU end      enabled (1) or disabled (0)
+ *         bit  6: MSDU start    enabled (1) or disabled (0)
+ *         bit  7: MSDU end      enabled (1) or disabled (0)
+ *         bit  8: rx attention  enabled (1) or disabled (0)
+ *         bit  9: frag info     enabled (1) or disabled (0)
+ *         bit 10: unicast rx    enabled (1) or disabled (0)
+ *         bit 11: multicast rx  enabled (1) or disabled (0)
+ *         bit 12: ctrl rx       enabled (1) or disabled (0)
+ *         bit 13: mgmt rx       enabled (1) or disabled (0)
+ *         bit 14: null rx       enabled (1) or disabled (0)
+ *         bit 15: phy data rx   enabled (1) or disabled (0)
+ *   - IDX_INIT_VAL
+ *     Bits 31:16
+ *     Purpose: Specify the initial value for the FW_IDX.
+ *     Value: the number of buffers initially present in the host's rx ring
+ *   - OFFSET_802_11_HDR
+ *     Bits 15:0
+ *     Value: offset in QUAD-bytes of 802.11 header from the buffer start
+ *   - OFFSET_MSDU_PAYLOAD
+ *     Bits 31:16
+ *     Value: offset in QUAD-bytes of MSDU payload from the buffer start
+ *   - OFFSET_PPDU_START
+ *     Bits 15:0
+ *     Value: offset in QUAD-bytes of PPDU start rx desc from the buffer start
+ *   - OFFSET_PPDU_END
+ *     Bits 31:16
+ *     Value: offset in QUAD-bytes of PPDU end rx desc from the buffer start
+ *   - OFFSET_MPDU_START
+ *     Bits 15:0
+ *     Value: offset in QUAD-bytes of MPDU start rx desc from the buffer start
+ *   - OFFSET_MPDU_END
+ *     Bits 31:16
+ *     Value: offset in QUAD-bytes of MPDU end rx desc from the buffer start
+ *   - OFFSET_MSDU_START
+ *     Bits 15:0
+ *     Value: offset in QUAD-bytes of MSDU start rx desc from the buffer start
+ *   - OFFSET_MSDU_END
+ *     Bits 31:16
+ *     Value: offset in QUAD-bytes of MSDU end rx desc from the buffer start
+ *   - OFFSET_RX_ATTN
+ *     Bits 15:0
+ *     Value: offset in QUAD-bytes of rx attention word from the buffer start
+ *   - OFFSET_FRAG_INFO
+ *     Bits 31:16
+ *     Value: offset in QUAD-bytes of frag info table
+ */
+/* header fields */
+#define HTT_RX_RING_CFG_NUM_RINGS_M      0xff00
+#define HTT_RX_RING_CFG_NUM_RINGS_S      8
+
+/* payload fields */
+/* for systems using a 64-bit format for bus addresses */
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_M 0xffffffff
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_S 0
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_M 0xffffffff
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_S 0
+#define HTT_RX_RING_CFG_BASE_PADDR_HI_M           0xffffffff
+#define HTT_RX_RING_CFG_BASE_PADDR_HI_S           0
+#define HTT_RX_RING_CFG_BASE_PADDR_LO_M           0xffffffff
+#define HTT_RX_RING_CFG_BASE_PADDR_LO_S           0
+
+/* for systems using a 32-bit format for bus addresses */
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_M    0xffffffff
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_S    0
+#define HTT_RX_RING_CFG_BASE_PADDR_M              0xffffffff
+#define HTT_RX_RING_CFG_BASE_PADDR_S              0
+
+#define HTT_RX_RING_CFG_LEN_M             0xffff
+#define HTT_RX_RING_CFG_LEN_S             0
+#define HTT_RX_RING_CFG_BUF_SZ_M          0xffff0000
+#define HTT_RX_RING_CFG_BUF_SZ_S          16
+#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_M   0x1
+#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_S   0
+#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_M   0x2
+#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_S   1
+#define HTT_RX_RING_CFG_ENABLED_PPDU_START_M   0x4
+#define HTT_RX_RING_CFG_ENABLED_PPDU_START_S   2
+#define HTT_RX_RING_CFG_ENABLED_PPDU_END_M     0x8
+#define HTT_RX_RING_CFG_ENABLED_PPDU_END_S     3
+#define HTT_RX_RING_CFG_ENABLED_MPDU_START_M   0x10
+#define HTT_RX_RING_CFG_ENABLED_MPDU_START_S   4
+#define HTT_RX_RING_CFG_ENABLED_MPDU_END_M     0x20
+#define HTT_RX_RING_CFG_ENABLED_MPDU_END_S     5
+#define HTT_RX_RING_CFG_ENABLED_MSDU_START_M   0x40
+#define HTT_RX_RING_CFG_ENABLED_MSDU_START_S   6
+#define HTT_RX_RING_CFG_ENABLED_MSDU_END_M     0x80
+#define HTT_RX_RING_CFG_ENABLED_MSDU_END_S     7
+#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_M      0x100
+#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_S      8
+#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_M    0x200
+#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_S    9
+#define HTT_RX_RING_CFG_ENABLED_UCAST_M        0x400
+#define HTT_RX_RING_CFG_ENABLED_UCAST_S        10
+#define HTT_RX_RING_CFG_ENABLED_MCAST_M        0x800
+#define HTT_RX_RING_CFG_ENABLED_MCAST_S        11
+#define HTT_RX_RING_CFG_ENABLED_CTRL_M         0x1000
+#define HTT_RX_RING_CFG_ENABLED_CTRL_S         12
+#define HTT_RX_RING_CFG_ENABLED_MGMT_M         0x2000
+#define HTT_RX_RING_CFG_ENABLED_MGMT_S         13
+#define HTT_RX_RING_CFG_ENABLED_NULL_M         0x4000
+#define HTT_RX_RING_CFG_ENABLED_NULL_S         14
+#define HTT_RX_RING_CFG_ENABLED_PHY_M          0x8000
+#define HTT_RX_RING_CFG_ENABLED_PHY_S          15
+#define HTT_RX_RING_CFG_IDX_INIT_VAL_M         0xffff0000
+#define HTT_RX_RING_CFG_IDX_INIT_VAL_S         16
+#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_M    0xffff
+#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_S    0
+#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_M    0xffff0000
+#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_S    16
+#define HTT_RX_RING_CFG_OFFSET_PPDU_START_M    0xffff
+#define HTT_RX_RING_CFG_OFFSET_PPDU_START_S    0
+#define HTT_RX_RING_CFG_OFFSET_PPDU_END_M      0xffff0000
+#define HTT_RX_RING_CFG_OFFSET_PPDU_END_S      16
+#define HTT_RX_RING_CFG_OFFSET_MPDU_START_M    0xffff
+#define HTT_RX_RING_CFG_OFFSET_MPDU_START_S    0
+#define HTT_RX_RING_CFG_OFFSET_MPDU_END_M      0xffff0000
+#define HTT_RX_RING_CFG_OFFSET_MPDU_END_S      16
+#define HTT_RX_RING_CFG_OFFSET_MSDU_START_M    0xffff
+#define HTT_RX_RING_CFG_OFFSET_MSDU_START_S    0
+#define HTT_RX_RING_CFG_OFFSET_MSDU_END_M      0xffff0000
+#define HTT_RX_RING_CFG_OFFSET_MSDU_END_S      16
+#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_M       0xffff
+#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_S       0
+#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_M     0xffff0000
+#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_S     16
+
+#define HTT_RX_RING_CFG_HDR_BYTES 4
+#define HTT_RX_RING_CFG_PAYLD_BYTES_64 44
+#define HTT_RX_RING_CFG_PAYLD_BYTES_32 36
+#if HTT_PADDR64
+    #define HTT_RX_RING_CFG_PAYLD_BYTES HTT_RX_RING_CFG_PAYLD_BYTES_64
+#else
+    #define HTT_RX_RING_CFG_PAYLD_BYTES HTT_RX_RING_CFG_PAYLD_BYTES_32
+#endif
+#define HTT_RX_RING_CFG_BYTES(num_rings) \
+    (HTT_RX_RING_CFG_HDR_BYTES + (num_rings) * HTT_RX_RING_CFG_PAYLD_BYTES)
+
+
+#define HTT_RX_RING_CFG_NUM_RINGS_GET(_var) \
+    (((_var) & HTT_RX_RING_CFG_NUM_RINGS_M) >> HTT_RX_RING_CFG_NUM_RINGS_S)
+#define HTT_RX_RING_CFG_NUM_RINGS_SET(_var, _val)            \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_NUM_RINGS, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_NUM_RINGS_S)); \
+    } while (0)
+
+/* degenerate case for 32-bit fields */
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_GET(_var) (_var)
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_SET(_var, _val) \
+    ((_var) = (_val))
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_GET(_var) (_var)
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_SET(_var, _val) \
+    ((_var) = (_val))
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_GET(_var) (_var)
+#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_SET(_var, _val) \
+    ((_var) = (_val))
+
+/* degenerate case for 32-bit fields */
+#define HTT_RX_RING_CFG_BASE_PADDR_HI_GET(_var) (_var)
+#define HTT_RX_RING_CFG_BASE_PADDR_HI_SET(_var, _val) \
+    ((_var) = (_val))
+#define HTT_RX_RING_CFG_BASE_PADDR_LO_GET(_var) (_var)
+#define HTT_RX_RING_CFG_BASE_PADDR_LO_SET(_var, _val) \
+    ((_var) = (_val))
+#define HTT_RX_RING_CFG_BASE_PADDR_GET(_var) (_var)
+#define HTT_RX_RING_CFG_BASE_PADDR_SET(_var, _val) \
+    ((_var) = (_val))
+
+#define HTT_RX_RING_CFG_LEN_GET(_var) \
+    (((_var) & HTT_RX_RING_CFG_LEN_M) >> HTT_RX_RING_CFG_LEN_S)
+#define HTT_RX_RING_CFG_LEN_SET(_var, _val)            \
+    do {                                                    \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_LEN, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_LEN_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_BUF_SZ_GET(_var) \
+    (((_var) & HTT_RX_RING_CFG_BUF_SZ_M) >> HTT_RX_RING_CFG_BUF_SZ_S)
+#define HTT_RX_RING_CFG_BUF_SZ_SET(_var, _val)            \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_BUF_SZ, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_BUF_SZ_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_IDX_INIT_VAL_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_IDX_INIT_VAL_M) >> \
+    HTT_RX_RING_CFG_IDX_INIT_VAL_S)
+#define HTT_RX_RING_CFG_IDX_INIT_VAL_SET(_var, _val)            \
+    do {                                                        \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_IDX_INIT_VAL, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_IDX_INIT_VAL_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_802_11_HDR_M) >> \
+    HTT_RX_RING_CFG_ENABLED_802_11_HDR_S)
+#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_SET(_var, _val)            \
+    do {                                                              \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_802_11_HDR, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_802_11_HDR_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_M) >> \
+    HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_S)
+#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_SET(_var, _val)            \
+    do {                                                              \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_PPDU_START_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_PPDU_START_M) >> \
+    HTT_RX_RING_CFG_ENABLED_PPDU_START_S)
+#define HTT_RX_RING_CFG_ENABLED_PPDU_START_SET(_var, _val)            \
+    do {                                                              \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_PPDU_START, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_PPDU_START_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_PPDU_END_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_PPDU_END_M) >> \
+    HTT_RX_RING_CFG_ENABLED_PPDU_END_S)
+#define HTT_RX_RING_CFG_ENABLED_PPDU_END_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_PPDU_END, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_PPDU_END_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_MPDU_START_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_MPDU_START_M) >> \
+    HTT_RX_RING_CFG_ENABLED_MPDU_START_S)
+#define HTT_RX_RING_CFG_ENABLED_MPDU_START_SET(_var, _val)            \
+    do {                                                              \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MPDU_START, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MPDU_START_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_MPDU_END_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_MPDU_END_M) >> \
+    HTT_RX_RING_CFG_ENABLED_MPDU_END_S)
+#define HTT_RX_RING_CFG_ENABLED_MPDU_END_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MPDU_END, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MPDU_END_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_MSDU_START_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_MSDU_START_M) >> \
+    HTT_RX_RING_CFG_ENABLED_MSDU_START_S)
+#define HTT_RX_RING_CFG_ENABLED_MSDU_START_SET(_var, _val)            \
+    do {                                                              \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MSDU_START, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MSDU_START_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_MSDU_END_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_MSDU_END_M) >> \
+    HTT_RX_RING_CFG_ENABLED_MSDU_END_S)
+#define HTT_RX_RING_CFG_ENABLED_MSDU_END_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MSDU_END, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MSDU_END_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_RX_ATTN_M) >> \
+    HTT_RX_RING_CFG_ENABLED_RX_ATTN_S)
+#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_SET(_var, _val)            \
+    do {                                                           \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_RX_ATTN, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_RX_ATTN_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_FRAG_INFO_M) >> \
+    HTT_RX_RING_CFG_ENABLED_FRAG_INFO_S)
+#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_FRAG_INFO, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_FRAG_INFO_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_UCAST_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_UCAST_M) >> \
+    HTT_RX_RING_CFG_ENABLED_UCAST_S)
+#define HTT_RX_RING_CFG_ENABLED_UCAST_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_UCAST, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_UCAST_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_ENABLED_MCAST_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_MCAST_M) >> \
+    HTT_RX_RING_CFG_ENABLED_MCAST_S)
+#define HTT_RX_RING_CFG_ENABLED_MCAST_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MCAST, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MCAST_S)); \
+    } while (0)
+#define HTT_RX_RING_CFG_ENABLED_CTRL_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_CTRL_M) >> \
+    HTT_RX_RING_CFG_ENABLED_CTRL_S)
+#define HTT_RX_RING_CFG_ENABLED_CTRL_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_CTRL, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_CTRL_S)); \
+    } while (0)
+#define HTT_RX_RING_CFG_ENABLED_MGMT_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_MGMT_M) >> \
+    HTT_RX_RING_CFG_ENABLED_MGMT_S)
+#define HTT_RX_RING_CFG_ENABLED_MGMT_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MGMT, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MGMT_S)); \
+    } while (0)
+#define HTT_RX_RING_CFG_ENABLED_NULL_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_NULL_M) >> \
+    HTT_RX_RING_CFG_ENABLED_NULL_S)
+#define HTT_RX_RING_CFG_ENABLED_NULL_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_NULL, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_NULL_S)); \
+    } while (0)
+#define HTT_RX_RING_CFG_ENABLED_PHY_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_ENABLED_PHY_M) >> \
+    HTT_RX_RING_CFG_ENABLED_PHY_S)
+#define HTT_RX_RING_CFG_ENABLED_PHY_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_PHY, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_PHY_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_802_11_HDR_M) >> \
+    HTT_RX_RING_CFG_OFFSET_802_11_HDR_S)
+#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_SET(_var, _val)            \
+    do {                                                                  \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_802_11_HDR, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_802_11_HDR_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_M) >> \
+    HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_S)
+#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_SET(_var, _val)            \
+    do {                                                                  \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_PPDU_START_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_PPDU_START_M) >> \
+    HTT_RX_RING_CFG_OFFSET_PPDU_START_S)
+#define HTT_RX_RING_CFG_OFFSET_PPDU_START_SET(_var, _val)            \
+    do {                                                                  \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_PPDU_START, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_PPDU_START_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_PPDU_END_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_PPDU_END_M) >> \
+    HTT_RX_RING_CFG_OFFSET_PPDU_END_S)
+#define HTT_RX_RING_CFG_OFFSET_PPDU_END_SET(_var, _val)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_PPDU_END, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_PPDU_END_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_MPDU_START_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_MPDU_START_M) >> \
+    HTT_RX_RING_CFG_OFFSET_MPDU_START_S)
+#define HTT_RX_RING_CFG_OFFSET_MPDU_START_SET(_var, _val)            \
+    do {                                                                  \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MPDU_START, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MPDU_START_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_MPDU_END_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_MPDU_END_M) >> \
+    HTT_RX_RING_CFG_OFFSET_MPDU_END_S)
+#define HTT_RX_RING_CFG_OFFSET_MPDU_END_SET(_var, _val)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MPDU_END, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MPDU_END_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_MSDU_START_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_MSDU_START_M) >> \
+    HTT_RX_RING_CFG_OFFSET_MSDU_START_S)
+#define HTT_RX_RING_CFG_OFFSET_MSDU_START_SET(_var, _val)            \
+    do {                                                                  \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MSDU_START, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MSDU_START_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_MSDU_END_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_MSDU_END_M) >> \
+    HTT_RX_RING_CFG_OFFSET_MSDU_END_S)
+#define HTT_RX_RING_CFG_OFFSET_MSDU_END_SET(_var, _val)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MSDU_END, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MSDU_END_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_RX_ATTN_M) >> \
+    HTT_RX_RING_CFG_OFFSET_RX_ATTN_S)
+#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_SET(_var, _val)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_RX_ATTN, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_RX_ATTN_S)); \
+    } while (0)
+
+#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_GET(_var)    \
+    (((_var) & HTT_RX_RING_CFG_OFFSET_FRAG_INFO_M) >> \
+    HTT_RX_RING_CFG_OFFSET_FRAG_INFO_S)
+#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_SET(_var, _val)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_FRAG_INFO, _val);  \
+        ((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_FRAG_INFO_S)); \
+    } while (0)
+
+/**
+ * @brief host -> target FW statistics retrieve
+ *
+ * @details
+ * The following field definitions describe the format of the HTT host
+ * to target FW stats retrieve message. The message specifies the type of
+ * stats host wants to retrieve.
+ *
+ * |31          24|23          16|15           8|7            0|
+ * |-----------------------------------------------------------|
+ * |        stats types request bitmask         |   msg type   |
+ * |-----------------------------------------------------------|
+ * |         stats types reset bitmask          |   reserved   |
+ * |-----------------------------------------------------------|
+ * |  stats type  |               config value                 |
+ * |-----------------------------------------------------------|
+ * |                        cookie LSBs                        |
+ * |-----------------------------------------------------------|
+ * |                        cookie MSBs                        |
+ * |-----------------------------------------------------------|
+ * Header fields:
+ *  - MSG_TYPE
+ *    Bits 7:0
+ *    Purpose: identifies this is a stats upload request message
+ *    Value: 0x3
+ *  - UPLOAD_TYPES
+ *    Bits 31:8
+ *    Purpose: identifies which types of FW statistics to upload
+ *    Value: mask with bits set in positions defined by htt_dbg_stats_type
+ *  - RESET_TYPES
+ *    Bits 31:8
+ *    Purpose: identifies which types of FW statistics to reset
+ *    Value: mask with bits set in positions defined by htt_dbg_stats_type
+ *  - CFG_VAL
+ *    Bits 23:0
+ *    Purpose: give an opaque configuration value to the specified stats type
+ *    Value: stats-type specific configuration value
+ *        if stats type == tx PPDU log, then CONFIG_VAL has the format:
+ *            bits  7:0  - how many per-MPDU byte counts to include in a record
+ *            bits 15:8  - how many per-MPDU MSDU counts to include in a record
+ *            bits 23:16 - how many per-MSDU byte counts to include in a record
+ *  - CFG_STAT_TYPE
+ *    Bits 31:24
+ *    Purpose: specify which stats type (if any) the config value applies to
+ *    Value: htt_dbg_stats_type value, or 0xff if the message doesn't have
+ *        a valid configuration specification
+ *  - COOKIE_LSBS
+ *    Bits 31:0
+ *    Purpose: Provide a mechanism to match a target->host stats confirmation
+ *        message with its preceding host->target stats request message.
+ *    Value: LSBs of the opaque cookie specified by the host-side requestor
+ *  - COOKIE_MSBS
+ *    Bits 31:0
+ *    Purpose: Provide a mechanism to match a target->host stats confirmation
+ *        message with its preceding host->target stats request message.
+ *    Value: MSBs of the opaque cookie specified by the host-side requestor
+ */
+
+#define HTT_H2T_STATS_REQ_MSG_SZ                    20 /* bytes */
+
+#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_INVALID     0xff
+
+#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_M            0xffffff00
+#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_S            8
+
+#define HTT_H2T_STATS_REQ_RESET_TYPES_M             0xffffff00
+#define HTT_H2T_STATS_REQ_RESET_TYPES_S             8
+
+#define HTT_H2T_STATS_REQ_CFG_VAL_M                 0x00ffffff
+#define HTT_H2T_STATS_REQ_CFG_VAL_S                 0
+
+#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_M           0xff000000
+#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_S           24
+
+#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_GET(_var)     \
+    (((_var) & HTT_H2T_STATS_REQ_UPLOAD_TYPES_M) >>  \
+     HTT_H2T_STATS_REQ_UPLOAD_TYPES_S)
+#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_SET(_var, _val)            \
+    do {                                                          \
+        HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_UPLOAD_TYPES, _val);  \
+        ((_var) |= ((_val) << HTT_H2T_STATS_REQ_UPLOAD_TYPES_S)); \
+    } while (0)
+
+#define HTT_H2T_STATS_REQ_RESET_TYPES_GET(_var)     \
+    (((_var) & HTT_H2T_STATS_REQ_RESET_TYPES_M) >>  \
+     HTT_H2T_STATS_REQ_RESET_TYPES_S)
+#define HTT_H2T_STATS_REQ_RESET_TYPES_SET(_var, _val)            \
+    do {                                                         \
+        HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_RESET_TYPES, _val);  \
+        ((_var) |= ((_val) << HTT_H2T_STATS_REQ_RESET_TYPES_S)); \
+    } while (0)
+
+#define HTT_H2T_STATS_REQ_CFG_VAL_GET(_var)     \
+    (((_var) & HTT_H2T_STATS_REQ_CFG_VAL_M) >>  \
+     HTT_H2T_STATS_REQ_CFG_VAL_S)
+#define HTT_H2T_STATS_REQ_CFG_VAL_SET(_var, _val)            \
+    do {                                                         \
+        HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_CFG_VAL, _val);  \
+        ((_var) |= ((_val) << HTT_H2T_STATS_REQ_CFG_VAL_S)); \
+    } while (0)
+
+#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_GET(_var)     \
+    (((_var) & HTT_H2T_STATS_REQ_CFG_STAT_TYPE_M) >>  \
+     HTT_H2T_STATS_REQ_CFG_STAT_TYPE_S)
+#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_SET(_var, _val)            \
+    do {                                                         \
+        HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_CFG_STAT_TYPE, _val);  \
+        ((_var) |= ((_val) << HTT_H2T_STATS_REQ_CFG_STAT_TYPE_S)); \
+    } while (0)
+
+/**
+ * @brief host -> target HTT out-of-band sync request
+ *
+ * @details
+ *  The HTT SYNC tells the target to suspend processing of subsequent
+ *  HTT host-to-target messages until some other target agent locally
+ *  informs the target HTT FW that the current sync counter is equal to
+ *  or greater than (in a modulo sense) the sync counter specified in
+ *  the SYNC message.
+ *  This allows other host-target components to synchronize their operation
+ *  with HTT, e.g. to ensure that tx frames don't get transmitted until a
+ *  security key has been downloaded to and activated by the target.
+ *  In the absence of any explicit synchronization counter value
+ *  specification, the target HTT FW will use zero as the default current
+ *  sync value.
+ *
+ * |31          24|23          16|15           8|7            0|
+ * |-----------------------------------------------------------|
+ * |          reserved           |  sync count  |   msg type   |
+ * |-----------------------------------------------------------|
+ * Header fields:
+ *  - MSG_TYPE
+ *    Bits 7:0
+ *    Purpose: identifies this as a sync message
+ *    Value: 0x4
+ *  - SYNC_COUNT
+ *    Bits 15:8
+ *    Purpose: specifies what sync value the HTT FW will wait for from
+ *        an out-of-band specification to resume its operation
+ *    Value: in-band sync counter value to compare against the out-of-band
+ *        counter spec.
+ *        The HTT target FW will suspend its host->target message processing
+ *        as long as
+ *        0 < (in-band sync counter - out-of-band sync counter) & 0xff < 128
+ */
+
+#define HTT_H2T_SYNC_MSG_SZ                 4
+
+#define HTT_H2T_SYNC_COUNT_M                0x0000ff00
+#define HTT_H2T_SYNC_COUNT_S                8
+
+#define HTT_H2T_SYNC_COUNT_GET(_var)        \
+    (((_var) & HTT_H2T_SYNC_COUNT_M) >>     \
+     HTT_H2T_SYNC_COUNT_S)
+#define HTT_H2T_SYNC_COUNT_SET(_var, _val)            \
+    do {                                              \
+        HTT_CHECK_SET_VAL(HTT_H2T_SYNC_COUNT, _val);  \
+        ((_var) |= ((_val) << HTT_H2T_SYNC_COUNT_S)); \
+    } while (0)
+
+
+/**
+ * @brief HTT aggregation configuration
+ */
+#define HTT_AGGR_CFG_MSG_SZ                     4
+
+#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_M     0xff00
+#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_S     8
+#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_M     0x1f0000
+#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_S     16
+
+#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_GET(_var) \
+    (((_var) & HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_M) >> \
+     HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_S)
+#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM, _val);  \
+        ((_var) |= ((_val) << HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_S)); \
+    } while (0)
+
+#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_GET(_var) \
+    (((_var) & HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_M) >> \
+     HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_S)
+#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM, _val);  \
+        ((_var) |= ((_val) << HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_S)); \
+    } while (0)
+
+
+/**
+ * @brief host -> target HTT configure max amsdu info per vdev
+ *
+ * @details
+ *  The HTT AGGR CFG EX tells the target to configure max_amsdu info per vdev
+ *
+ * |31             21|20       16|15           8|7            0|
+ * |-----------------------------------------------------------|
+ * |       reserved  | vdev id   |   max amsdu  |   msg type   |
+ * |-----------------------------------------------------------|
+ * Header fields:
+ *  - MSG_TYPE
+ *    Bits 7:0
+ *    Purpose: identifies this as a aggr cfg ex message
+ *    Value: 0xa
+ *  - MAX_NUM_AMSDU_SUBFRM
+ *    Bits 15:8
+ *    Purpose: max MSDUs per A-MSDU
+ *  - VDEV_ID
+ *    Bits 20:16
+ *    Purpose: ID of the vdev to which this limit is applied
+ */
+#define HTT_AGGR_CFG_EX_MSG_SZ                     4
+
+#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_M     0xff00
+#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_S     8
+#define HTT_AGGR_CFG_EX_VDEV_ID_M                  0x1f0000
+#define HTT_AGGR_CFG_EX_VDEV_ID_S                  16
+
+#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_GET(_var) \
+            (((_var) & HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_M) >> \
+             HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_S)
+#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_SET(_var, _val) \
+            do {                                                     \
+                HTT_CHECK_SET_VAL(HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM, _val);  \
+                ((_var) |= ((_val) << HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_S)); \
+            } while (0)
+
+#define HTT_AGGR_CFG_EX_VDEV_ID_GET(_var) \
+            (((_var) & HTT_AGGR_CFG_EX_VDEV_ID_M) >> \
+             HTT_AGGR_CFG_EX_VDEV_ID_S)
+#define HTT_AGGR_CFG_EX_VDEV_ID_SET(_var, _val) \
+            do {                                                     \
+                HTT_CHECK_SET_VAL(HTT_AGGR_CFG_EX_VDEV_ID, _val);  \
+                ((_var) |= ((_val) << HTT_AGGR_CFG_EX_VDEV_ID_S)); \
+            } while (0)
+
+/**
+ * @brief HTT WDI_IPA Config Message
+ *
+ * @details
+ *  The HTT WDI_IPA config message is created/sent by host at driver
+ *  init time. It contains information about data structures used on
+ *  WDI_IPA TX and RX path.
+ *  TX CE ring is used for pushing packet metadata from IPA uC
+ *  to WLAN FW
+ *  TX Completion ring is used for generating TX completions from
+ *  WLAN FW to IPA uC
+ *  RX Indication ring is used for indicating RX packets from FW
+ *  to IPA uC
+ *  RX Ring2 is used as either completion ring or as second
+ *  indication ring. when Ring2 is used as completion ring, IPA uC
+ *  puts completed RX packet meta data to Ring2. when Ring2 is used
+ *  as second indication ring, RX packets for LTE-WLAN aggregation are
+ *  indicated in Ring2, other RX packets (e.g. hotspot related) are
+ *  indicated in RX Indication ring. Please see WDI_IPA specification
+ *  for more details.
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |        tx pkt pool size         |      Rsvd      |     msg_type   |
+ *     |-------------------------------------------------------------------|
+ *     |                 tx comp ring base (bits 31:0)                     |
+#if HTT_PADDR64
+ *     |                 tx comp ring base (bits 63:32)                    |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |                         tx comp ring size                         |
+ *     |-------------------------------------------------------------------|
+ *     |            tx comp WR_IDX physical address (bits 31:0)            |
+#if HTT_PADDR64
+ *     |            tx comp WR_IDX physical address (bits 63:32)           |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |            tx CE WR_IDX physical address (bits 31:0)              |
+#if HTT_PADDR64
+ *     |            tx CE WR_IDX physical address (bits 63:32)             |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |             rx indication ring base (bits 31:0)                   |
+#if HTT_PADDR64
+ *     |             rx indication ring base (bits 63:32)                  |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |                      rx indication ring size                      |
+ *     |-------------------------------------------------------------------|
+ *     |             rx ind RD_IDX physical address (bits 31:0)            |
+#if HTT_PADDR64
+ *     |             rx ind RD_IDX physical address (bits 63:32)           |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |             rx ind WR_IDX physical address (bits 31:0)            |
+#if HTT_PADDR64
+ *     |             rx ind WR_IDX physical address (bits 63:32)           |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |-------------------------------------------------------------------|
+ *     |                    rx ring2 base (bits 31:0)                      |
+#if HTT_PADDR64
+ *     |                    rx ring2 base (bits 63:32)                     |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |                        rx ring2 size                              |
+ *     |-------------------------------------------------------------------|
+ *     |             rx ring2 RD_IDX physical address (bits 31:0)          |
+#if HTT_PADDR64
+ *     |             rx ring2 RD_IDX physical address (bits 63:32)         |
+#endif
+ *     |-------------------------------------------------------------------|
+ *     |             rx ring2 WR_IDX physical address (bits 31:0)          |
+#if HTT_PADDR64
+ *     |             rx ring2 WR_IDX physical address (bits 63:32)         |
+#endif
+ *     |-------------------------------------------------------------------|
+ *
+ * Header fields:
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: Identifies this as WDI_IPA config message
+ *     value: = 0x8
+ *   - TX_PKT_POOL_SIZE
+ *     Bits 15:0
+ *     Purpose: Total number of TX packet buffer pool allocated by Host for
+ *              WDI_IPA TX path
+ *   For systems using 32-bit format for bus addresses:
+ *     - TX_COMP_RING_BASE_ADDR
+ *       Bits 31:0
+ *       Purpose: TX Completion Ring base address in DDR
+ *     - TX_COMP_RING_SIZE
+ *       Bits 31:0
+ *       Purpose: TX Completion Ring size (must be power of 2)
+ *     - TX_COMP_WR_IDX_ADDR
+ *       Bits 31:0
+ *       Purpose: IPA doorbell register address OR DDR address where WIFI FW
+ *                updates the Write Index for WDI_IPA TX completion ring
+ *     - TX_CE_WR_IDX_ADDR
+ *       Bits 31:0
+ *       Purpose: DDR address where IPA uC
+ *                updates the WR Index for TX CE ring
+ *                (needed for fusion platforms)
+ *     - RX_IND_RING_BASE_ADDR
+ *       Bits 31:0
+ *       Purpose: RX Indication Ring base address in DDR
+ *     - RX_IND_RING_SIZE
+ *       Bits 31:0
+ *       Purpose: RX Indication Ring size
+ *     - RX_IND_RD_IDX_ADDR
+ *       Bits 31:0
+ *       Purpose: DDR address where IPA uC updates the Read Index for WDI_IPA
+ *                RX indication ring
+ *     - RX_IND_WR_IDX_ADDR
+ *       Bits 31:0
+ *       Purpose: IPA doorbell register address OR DDR address where WIFI FW
+ *                updates the Write Index for WDI_IPA RX indication ring
+ *     - RX_RING2_BASE_ADDR
+ *       Bits 31:0
+ *       Purpose: Second RX Ring(Indication or completion)base address in DDR
+ *     - RX_RING2_SIZE
+ *       Bits 31:0
+ *       Purpose: Second RX  Ring size (must be >= RX_IND_RING_SIZE)
+ *     - RX_RING2_RD_IDX_ADDR
+ *       Bits 31:0
+ *       Purpose: If Second RX ring is Indication ring, DDR address where
+ *                IPA uC updates the Read Index for Ring2.
+ *                If Second RX ring is completion ring, this is NOT used
+ *     - RX_RING2_WR_IDX_ADDR
+ *       Bits 31:0
+ *       Purpose: If Second RX ring is Indication ring,  DDR address where
+ *                WIFI FW updates the Write Index for WDI_IPA RX ring2
+ *                If second RX ring is completion ring, DDR address where
+ *                IPA uC updates the Write Index for Ring 2.
+ *   For systems using 64-bit format for bus addresses:
+ *     - TX_COMP_RING_BASE_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: Lower 4 bytes of TX Completion Ring base physical address in DDR
+ *     - TX_COMP_RING_BASE_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: Higher 4 bytes of TX Completion Ring base physical address in DDR
+ *     - TX_COMP_RING_SIZE
+ *       Bits 31:0
+ *       Purpose: TX Completion Ring size (must be power of 2)
+ *     - TX_COMP_WR_IDX_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: Lower 4 bytes of IPA doorbell register address OR
+ *                Lower 4 bytes of DDR address where WIFI FW
+ *                updates the Write Index for WDI_IPA TX completion ring
+ *     - TX_COMP_WR_IDX_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: Higher 4 bytes of IPA doorbell register address OR
+ *                Higher 4 bytes of DDR address where WIFI FW
+ *                updates the Write Index for WDI_IPA TX completion ring
+ *     - TX_CE_WR_IDX_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: Lower 4 bytes of DDR address where IPA uC
+ *                updates the WR Index for TX CE ring
+ *                (needed for fusion platforms)
+ *     - TX_CE_WR_IDX_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: Higher 4 bytes of DDR address where IPA uC
+ *                updates the WR Index for TX CE ring
+ *                (needed for fusion platforms)
+ *     - RX_IND_RING_BASE_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: Lower 4 bytes of RX Indication Ring base address in DDR
+ *     - RX_IND_RING_BASE_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: Higher 4 bytes of RX Indication Ring base address in DDR
+ *     - RX_IND_RING_SIZE
+ *       Bits 31:0
+ *       Purpose: RX Indication Ring size
+ *     - RX_IND_RD_IDX_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: Lower 4 bytes of DDR address where IPA uC updates the Read Index
+ *                for WDI_IPA RX indication ring
+ *     - RX_IND_RD_IDX_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: Higher 4 bytes of DDR address where IPA uC updates the Read Index
+ *                for WDI_IPA RX indication ring
+ *     - RX_IND_WR_IDX_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: Lower 4 bytes of IPA doorbell register address OR
+ *                Lower 4 bytes of DDR address where WIFI FW
+ *                updates the Write Index for WDI_IPA RX indication ring
+ *     - RX_IND_WR_IDX_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: Higher 4 bytes of IPA doorbell register address OR
+ *                Higher 4 bytes of DDR address where WIFI FW
+ *                updates the Write Index for WDI_IPA RX indication ring
+ *     - RX_RING2_BASE_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: Lower 4 bytes of Second RX Ring(Indication OR completion)base address in DDR
+ *     - RX_RING2_BASE_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: Higher 4 bytes of Second RX Ring(Indication OR completion)base address in DDR
+ *     - RX_RING2_SIZE
+ *       Bits 31:0
+ *       Purpose: Second RX  Ring size (must be >= RX_IND_RING_SIZE)
+ *     - RX_RING2_RD_IDX_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: If Second RX ring is Indication ring, lower 4 bytes of
+ *                DDR address where IPA uC updates the Read Index for Ring2.
+ *                If Second RX ring is completion ring, this is NOT used
+ *     - RX_RING2_RD_IDX_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: If Second RX ring is Indication ring, higher 4 bytes of
+ *                DDR address where IPA uC updates the Read Index for Ring2.
+ *                If Second RX ring is completion ring, this is NOT used
+ *     - RX_RING2_WR_IDX_ADDR_LO
+ *       Bits 31:0
+ *       Purpose: If Second RX ring is Indication ring, lower 4 bytes of
+ *                DDR address where WIFI FW updates the Write Index
+ *                for WDI_IPA RX ring2
+ *                If second RX ring is completion ring, lower 4 bytes of
+ *                DDR address where IPA uC updates the Write Index for Ring 2.
+ *     - RX_RING2_WR_IDX_ADDR_HI
+ *       Bits 31:0
+ *       Purpose: If Second RX ring is Indication ring, higher 4 bytes of
+ *                DDR address where WIFI FW updates the Write Index
+ *                for WDI_IPA RX ring2
+ *                If second RX ring is completion ring, higher 4 bytes of
+ *                DDR address where IPA uC updates the Write Index for Ring 2.
+ */
+
+#if HTT_PADDR64
+#define HTT_WDI_IPA_CFG_SZ                           88 /* bytes */
+#else
+#define HTT_WDI_IPA_CFG_SZ                           52 /* bytes */
+#endif
+
+#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_M           0xffff0000
+#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_S           16
+
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_M     0xffffffff
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_S     0
+
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_M  0xffffffff
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_S  0
+
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_M  0xffffffff
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_S  0
+
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_M          0xffffffff
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_S          0
+
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_M        0xffffffff
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_S        0
+
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_M     0xffffffff
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_S     0
+
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_M     0xffffffff
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_S     0
+
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_M          0xffffffff
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_S          0
+
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_M       0xffffffff
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_S       0
+
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_M       0xffffffff
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_S       0
+
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_M      0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_S      0
+
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_M   0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_S   0
+
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_M   0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_S   0
+
+#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_M           0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_S           0
+
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_M         0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_S         0
+
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_M      0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_S      0
+
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_M      0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_S      0
+
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_M         0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_S         0
+
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_M      0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_S      0
+
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_M      0xffffffff
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_S      0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_M         0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_S         0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_M      0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_S      0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_M      0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_S      0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_M              0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_S              0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_M       0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_S       0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_M    0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_S    0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_M    0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_S    0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_M       0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_S       0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_M    0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_S    0
+
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_M    0xffffffff
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_S    0
+
+#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_M) >> HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_S)
+#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_S)
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_S)); \
+    } while (0)
+
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_S)
+#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_S)
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_S)); \
+    } while (0)
+
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_S)
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_S)
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_S)); \
+    } while (0)
+
+#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_S)
+#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_SIZE, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_S)
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_S)
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_M) >> HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_S)); \
+    } while (0)
+
+#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_SIZE_M) >> HTT_WDI_IPA_CFG_RX_RING2_SIZE_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_SIZE, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_SIZE_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_S)); \
+    } while (0)
+
+/* for systems using 32-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_S)); \
+    } while (0)
+
+/* for systems using 64-bit format for bus addr */
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_GET(_var) \
+    (((_var) & HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_S)
+#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_S)); \
+    } while (0)
+
+/*
+ * TEMPLATE_HTT_WDI_IPA_CONFIG_T:
+ * This macro defines a htt_wdi_ipa_configXXX_t in which any physical
+ * addresses are stored in a XXX-bit field.
+ * This macro is used to define both htt_wdi_ipa_config32_t and
+ * htt_wdi_ipa_config64_t structs.
+ */
+#define TEMPLATE_HTT_WDI_IPA_CONFIG_T(_paddr_bits_, \
+                                      _paddr__tx_comp_ring_base_addr_, \
+                                      _paddr__tx_comp_wr_idx_addr_, \
+                                      _paddr__tx_ce_wr_idx_addr_, \
+                                      _paddr__rx_ind_ring_base_addr_, \
+                                      _paddr__rx_ind_rd_idx_addr_, \
+                                      _paddr__rx_ind_wr_idx_addr_, \
+                                      _paddr__rx_ring2_base_addr_,\
+                                      _paddr__rx_ring2_rd_idx_addr_,\
+                                      _paddr__rx_ring2_wr_idx_addr_)      \
+PREPACK struct htt_wdi_ipa_cfg ## _paddr_bits_ ## _t \
+{ \
+  /* DWORD 0: flags and meta-data */ \
+    A_UINT32 \
+        msg_type: 8, /* HTT_H2T_MSG_TYPE_WDI_IPA_CFG */ \
+        reserved: 8, \
+        tx_pkt_pool_size: 16;\
+    /* DWORD 1  */\
+    _paddr__tx_comp_ring_base_addr_;\
+    /* DWORD 2 (or 3)*/\
+    A_UINT32 tx_comp_ring_size;\
+    /* DWORD 3 (or 4)*/\
+    _paddr__tx_comp_wr_idx_addr_;\
+    /* DWORD 4 (or 6)*/\
+    _paddr__tx_ce_wr_idx_addr_;\
+    /* DWORD 5 (or 8)*/\
+    _paddr__rx_ind_ring_base_addr_;\
+    /* DWORD 6 (or 10)*/\
+    A_UINT32 rx_ind_ring_size;\
+    /* DWORD 7 (or 11)*/\
+    _paddr__rx_ind_rd_idx_addr_;\
+    /* DWORD 8 (or 13)*/\
+    _paddr__rx_ind_wr_idx_addr_;\
+    /* DWORD 9 (or 15)*/\
+    _paddr__rx_ring2_base_addr_;\
+    /* DWORD 10 (or 17) */\
+    A_UINT32 rx_ring2_size;\
+    /* DWORD 11 (or 18) */\
+    _paddr__rx_ring2_rd_idx_addr_;\
+    /* DWORD 12 (or 20) */\
+    _paddr__rx_ring2_wr_idx_addr_;\
+} POSTPACK
+
+/* define a htt_wdi_ipa_config32_t type */
+TEMPLATE_HTT_WDI_IPA_CONFIG_T(32, HTT_VAR_PADDR32(tx_comp_ring_base_addr), HTT_VAR_PADDR32(tx_comp_wr_idx_addr), HTT_VAR_PADDR32(tx_ce_wr_idx_addr), HTT_VAR_PADDR32(rx_ind_ring_base_addr), HTT_VAR_PADDR32(rx_ind_rd_idx_addr),HTT_VAR_PADDR32(rx_ind_wr_idx_addr), HTT_VAR_PADDR32(rx_ring2_base_addr), HTT_VAR_PADDR32(rx_ring2_rd_idx_addr), HTT_VAR_PADDR32(rx_ring2_wr_idx_addr));
+
+/* define a htt_wdi_ipa_config64_t type */
+TEMPLATE_HTT_WDI_IPA_CONFIG_T(64, HTT_VAR_PADDR64_LE(tx_comp_ring_base_addr), HTT_VAR_PADDR64_LE(tx_comp_wr_idx_addr), HTT_VAR_PADDR64_LE(tx_ce_wr_idx_addr), HTT_VAR_PADDR64_LE(rx_ind_ring_base_addr), HTT_VAR_PADDR64_LE(rx_ind_rd_idx_addr), HTT_VAR_PADDR64_LE(rx_ind_wr_idx_addr), HTT_VAR_PADDR64_LE(rx_ring2_base_addr), HTT_VAR_PADDR64_LE(rx_ring2_rd_idx_addr), HTT_VAR_PADDR64_LE(rx_ring2_wr_idx_addr));
+
+#if HTT_PADDR64
+    #define htt_wdi_ipa_cfg_t htt_wdi_ipa_cfg64_t
+#else
+    #define htt_wdi_ipa_cfg_t htt_wdi_ipa_cfg32_t
+#endif
+
+enum htt_wdi_ipa_op_code {
+    HTT_WDI_IPA_OPCODE_TX_SUSPEND           = 0,
+    HTT_WDI_IPA_OPCODE_TX_RESUME            = 1,
+    HTT_WDI_IPA_OPCODE_RX_SUSPEND           = 2,
+    HTT_WDI_IPA_OPCODE_RX_RESUME            = 3,
+    HTT_WDI_IPA_OPCODE_DBG_STATS            = 4,
+    /* keep this last */
+    HTT_WDI_IPA_OPCODE_MAX
+};
+
+/**
+ * @brief HTT WDI_IPA Operation Request Message
+ *
+ * @details
+ *  HTT WDI_IPA Operation Request message is sent by host
+ *  to either suspend or resume WDI_IPA TX or RX path.
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |             op_code             |      Rsvd      |     msg_type   |
+ *     |-------------------------------------------------------------------|
+ *
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: Identifies this as WDI_IPA Operation Request message
+ *     value: = 0x9
+ *   - OP_CODE
+ *     Bits 31:16
+ *     Purpose: Identifies operation host is requesting (e.g. TX suspend)
+ *     value: = enum htt_wdi_ipa_op_code
+ */
+
+PREPACK struct htt_wdi_ipa_op_request_t
+{
+    /* DWORD 0: flags and meta-data */
+    A_UINT32
+        msg_type: 8, /* HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQUEST */
+        reserved: 8,
+        op_code: 16;
+} POSTPACK;
+
+#define HTT_WDI_IPA_OP_REQUEST_SZ                    4 /* bytes */
+
+#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_M             0xffff0000
+#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_S             16
+
+#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_GET(_var) \
+    (((_var) & HTT_WDI_IPA_OP_REQUEST_OP_CODE_M) >> HTT_WDI_IPA_OP_REQUEST_OP_CODE_S)
+#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_OP_REQUEST_OP_CODE, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_OP_REQUEST_OP_CODE_S)); \
+    } while (0)
+
+/*
+ * @brief  host -> target  HTT_SRING_SETUP message
+ *
+ * @details
+ * After target is booted up, Host can send SRING setup message for
+ * each host facing LMAC SRING. Target setups up HW registers based
+ * on setup message and confirms back to Host if response_required is set.
+ * Host should wait for confirmation message before sending new SRING
+ * setup message
+ *
+ *    The message would appear as follows:
+ *    |31            24|23    20|19|18 16|15|14          8|7                0|
+ *    |--------------- +-----------------+----------------+------------------|
+ *    |    ring_type   |      ring_id    |    pdev_id     |     msg_type     |
+ *    |----------------------------------------------------------------------|
+ *    |                          ring_base_addr_lo                           |
+ *    |----------------------------------------------------------------------|
+ *    |                         ring_base_addr_hi                            |
+ *    |----------------------------------------------------------------------|
+ *    |ring_misc_cfg_flag|ring_entry_size|            ring_size              |
+ *    |----------------------------------------------------------------------|
+ *    |                         ring_head_offset32_remote_addr_lo            |
+ *    |----------------------------------------------------------------------|
+ *    |                         ring_head_offset32_remote_addr_hi            |
+ *    |----------------------------------------------------------------------|
+ *    |                         ring_tail_offset32_remote_addr_lo            |
+ *    |----------------------------------------------------------------------|
+ *    |                         ring_tail_offset32_remote_addr_hi            |
+ *    |----------------------------------------------------------------------|
+ *    |                          ring_msi_addr_lo                            |
+ *    |----------------------------------------------------------------------|
+ *    |                          ring_msi_addr_hi                            |
+ *    |----------------------------------------------------------------------|
+ *    |                          ring_msi_data                               |
+ *    |----------------------------------------------------------------------|
+ *    |         intr_timer_th            |IM|      intr_batch_counter_th     |
+ *    |----------------------------------------------------------------------|
+ *    |          reserved        |RR|PTCF|        intr_low_threshold         |
+ *    |----------------------------------------------------------------------|
+ * Where
+ *     IM = sw_intr_mode
+ *     RR = response_required
+ *     PTCF = prefetch_timer_cfg
+ *
+ * The message is interpreted as follows:
+ * dword0  - b'0:7   - msg_type: This will be set to
+ *                     HTT_H2T_MSG_TYPE_SRING_SETUP
+ *           b'8:15  - pdev_id:
+ *                     0 (for rings at SOC/UMAC level),
+ *                     1/2/3 mac id (for rings at LMAC level)
+ *           b'16:23 - ring_id: identify which ring is to setup,
+ *                     more details can be got from enum htt_srng_ring_id
+ *           b'24:31 - ring_type: identify type of host rings,
+ *                     more details can be got from enum htt_srng_ring_type
+ * dword1  - b'0:31  - ring_base_addr_lo: Lower 32bits of ring base address
+ * dword2  - b'0:31  - ring_base_addr_hi: Upper 32bits of ring base address
+ * dword3  - b'0:15  - ring_size: size of the ring in unit of 4-bytes words
+ *           b'16:23 - ring_entry_size: Size of each entry in 4-byte word units
+ *           b'24:31 - ring_misc_cfg_flag: Valid only for HW_TO_SW_RING and
+ *                     SW_TO_HW_RING.
+ *                     Refer to HTT_SRING_SETUP_RING_MISC_CFG_RING defs.
+ * dword4  - b'0:31  - ring_head_offset32_remote_addr_lo:
+ *                     Lower 32 bits of memory address of the remote variable
+ *                     storing the 4-byte word offset that identifies the head
+ *                     element within the ring.
+ *                     (The head offset variable has type A_UINT32.)
+ *                     Valid for HW_TO_SW and SW_TO_SW rings.
+ * dword5  - b'0:31  - ring_head_offset32_remote_addr_hi:
+ *                     Upper 32 bits of memory address of the remote variable
+ *                     storing the 4-byte word offset that identifies the head
+ *                     element within the ring.
+ *                     (The head offset variable has type A_UINT32.)
+ *                     Valid for HW_TO_SW and SW_TO_SW rings.
+ * dword6  - b'0:31  - ring_tail_offset32_remote_addr_lo:
+ *                     Lower 32 bits of memory address of the remote variable
+ *                     storing the 4-byte word offset that identifies the tail
+ *                     element within the ring.
+ *                     (The tail offset variable has type A_UINT32.)
+ *                     Valid for HW_TO_SW and SW_TO_SW rings.
+ * dword7  - b'0:31  - ring_tail_offset32_remote_addr_hi:
+ *                     Upper 32 bits of memory address of the remote variable
+ *                     storing the 4-byte word offset that identifies the tail
+ *                     element within the ring.
+ *                     (The tail offset variable has type A_UINT32.)
+ *                     Valid for HW_TO_SW and SW_TO_SW rings.
+ * dword8  - b'0:31  - ring_msi_addr_lo: Lower 32bits of MSI cfg address
+ *                     valid only for HW_TO_SW_RING and SW_TO_HW_RING
+ * dword9  - b'0:31  - ring_msi_addr_hi: Upper 32bits of MSI cfg address
+ *                     valid only for HW_TO_SW_RING and SW_TO_HW_RING
+ * dword10 - b'0:31  - ring_msi_data: MSI data
+ *                     Refer to HTT_SRING_SETUP_RING_MSC_CFG_xxx defs
+ *                     valid only for HW_TO_SW_RING and SW_TO_HW_RING
+ * dword11 - b'0:14  - intr_batch_counter_th:
+ *                     batch counter threshold is in units of 4-byte words.
+ *                     HW internally maintains and increments batch count.
+ *                     (see SRING spec for detail description).
+ *                     When batch count reaches threshold value, an interrupt
+ *                     is generated by HW.
+ *           b'15    - sw_intr_mode:
+ *                     This configuration shall be static.
+ *                     Only programmed at power up.
+ *                     0: generate pulse style sw interrupts
+ *                     1: generate level style sw interrupts
+ *           b'16:31 - intr_timer_th:
+ *                     The timer init value when timer is idle or is
+ *                     initialized to start downcounting.
+ *                     In 8us units (to cover a range of 0 to 524 ms)
+ * dword12 - b'0:15  - intr_low_threshold:
+ *                     Used only by Consumer ring to generate ring_sw_int_p.
+ *                     Ring entries low threshold water mark, that is used
+ *                     in combination with the interrupt timer as well as
+ *                     the the clearing of the level interrupt.
+ *           b'16:18 - prefetch_timer_cfg:
+ *                     Used only by Consumer ring to set timer mode to
+ *                     support Application prefetch handling.
+ *                     The external tail offset/pointer will be updated
+ *                     at following intervals:
+ *                     3'b000: (Prefetch feature disabled; used only for debug)
+ *                     3'b001: 1 usec
+ *                     3'b010: 4 usec
+ *                     3'b011: 8 usec (default)
+ *                     3'b100: 16 usec
+ *                     Others: Reserverd
+ *           b'19    - response_required:
+ *                     Host needs HTT_T2H_MSG_TYPE_SRING_SETUP_DONE as response
+ *           b'20:31 - reserved:  reserved for future use
+ */
+PREPACK struct htt_sring_setup_t {
+    A_UINT32 msg_type:  8,
+             pdev_id:   8,
+             ring_id:   8,
+             ring_type: 8;
+    A_UINT32 ring_base_addr_lo;
+    A_UINT32 ring_base_addr_hi;
+    A_UINT32 ring_size:          16,
+             ring_entry_size:     8,
+             ring_misc_cfg_flag:  8;
+    A_UINT32 ring_head_offset32_remote_addr_lo;
+    A_UINT32 ring_head_offset32_remote_addr_hi;
+    A_UINT32 ring_tail_offset32_remote_addr_lo;
+    A_UINT32 ring_tail_offset32_remote_addr_hi;
+    A_UINT32 ring_msi_addr_lo;
+    A_UINT32 ring_msi_addr_hi;
+    A_UINT32 ring_msi_data;
+    A_UINT32 intr_batch_counter_th: 15,
+             sw_intr_mode:           1,
+             intr_timer_th:         16;
+    A_UINT32 intr_low_threshold: 16,
+             prefetch_timer_cfg:  3,
+             response_required:   1,
+             reserved1:          12;
+} POSTPACK;
+
+enum htt_srng_ring_type {
+    HTT_HW_TO_SW_RING = 0,
+    HTT_SW_TO_HW_RING,
+    HTT_SW_TO_SW_RING,
+    /* Insert new ring types above this line */
+};
+
+enum htt_srng_ring_id {
+    HTT_RXDMA_HOST_BUF_RING = 0,   /* Used by FW to feed remote buffers and update remote packets */
+    HTT_RXDMA_MONITOR_STATUS_RING, /* For getting all PPDU/MPDU/MSDU status deescriptors on host for monitor VAP or packet log purposes */
+    HTT_RXDMA_MONITOR_BUF_RING,    /* For feeding free host buffers to RxDMA for monitor traffic upload */
+    HTT_RXDMA_MONITOR_DESC_RING,   /* For providing free LINK_DESC to RXDMA  for monitor traffic upload */
+    HTT_RXDMA_MONITOR_DEST_RING,   /* Per MPDU indication to host for monitor traffic upload */
+    HTT_HOST1_TO_FW_RXBUF_RING,    /* (mobile only) used by host to provide remote RX buffers */
+    HTT_HOST2_TO_FW_RXBUF_RING,    /* (mobile only) second ring used by host to provide remote RX buffers */
+    /* Add Other SRING which can't be directly configured by host software above this line */
+};
+
+#define HTT_SRING_SETUP_SZ    (sizeof(struct htt_sring_setup_t))
+
+#define HTT_SRING_SETUP_PDEV_ID_M                  0x0000ff00
+#define HTT_SRING_SETUP_PDEV_ID_S                  8
+#define HTT_SRING_SETUP_PDEV_ID_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_PDEV_ID_M) >> \
+                HTT_SRING_SETUP_PDEV_ID_S)
+#define HTT_SRING_SETUP_PDEV_ID_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_PDEV_ID, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_PDEV_ID_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_ID_M                  0x00ff0000
+#define HTT_SRING_SETUP_RING_ID_S                  16
+#define HTT_SRING_SETUP_RING_ID_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_ID_M) >> \
+                HTT_SRING_SETUP_RING_ID_S)
+#define HTT_SRING_SETUP_RING_ID_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_ID, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_ID_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_TYPE_M                0xff000000
+#define HTT_SRING_SETUP_RING_TYPE_S                24
+#define HTT_SRING_SETUP_RING_TYPE_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_TYPE_M) >> \
+                HTT_SRING_SETUP_RING_TYPE_S)
+#define HTT_SRING_SETUP_RING_TYPE_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_TYPE, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_TYPE_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_M        0xffffffff
+#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_S        0
+#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_BASE_ADDR_LO_M) >> \
+                HTT_SRING_SETUP_RING_BASE_ADDR_LO_S)
+#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_BASE_ADDR_LO, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_BASE_ADDR_LO_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_M        0xffffffff
+#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_S        0
+#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_BASE_ADDR_HI_M) >> \
+                HTT_SRING_SETUP_RING_BASE_ADDR_HI_S)
+#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_BASE_ADDR_HI, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_BASE_ADDR_HI_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_SIZE_M               0x0000ffff
+#define HTT_SRING_SETUP_RING_SIZE_S               0
+#define HTT_SRING_SETUP_RING_SIZE_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_SIZE_M) >> \
+                HTT_SRING_SETUP_RING_SIZE_S)
+#define HTT_SRING_SETUP_RING_SIZE_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_SIZE, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_SIZE_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_ENTRY_SIZE_M              0x00ff00000
+#define HTT_SRING_SETUP_ENTRY_SIZE_S              16
+#define HTT_SRING_SETUP_ENTRY_SIZE_GET(_var)    \
+        (((_var) & HTT_SRING_SETUP_ENTRY_SIZE_M) >> \
+                HTT_SRING_SETUP_ENTRY_SIZE_S)
+#define HTT_SRING_SETUP_ENTRY_SIZE_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_ENTRY_SIZE, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_ENTRY_SIZE_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_MISC_CFG_FLAG_M            0xff0000000
+#define HTT_SRING_SETUP_MISC_CFG_FLAG_S            24
+#define HTT_SRING_SETUP_MISC_CFG_FLAG_GET(_var)    \
+        (((_var) & HTT_SRING_SETUP_MISC_CFG_FLAG_M) >> \
+                HTT_SRING_SETUP_MISC_CFG_FLAG_S)
+#define HTT_SRING_SETUP_MISC_CFG_FLAG_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_MISC_CFG_FLAG, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_MISC_CFG_FLAG_S)); \
+        } while (0)
+
+/* This control bit is applicable to only Producer, which updates Ring ID field
+* of each descriptor before pushing into the ring.
+* 0: updates ring_id(default)
+* 1: ring_id updating disabled */
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_M         0x01
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_S         0
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_M) >> \
+        HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_S)
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_S)); \
+        } while (0)
+
+/* This control bit is applicable to only Producer, which updates Loopcnt field
+* of each descriptor before pushing into the ring.
+* 0: updates Loopcnt(default)
+* 1: Loopcnt updating disabled */
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_M  0x02
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_S  1
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_M) >> \
+        HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_S)
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_S)); \
+        } while (0)
+
+/* Secured access enable/disable bit. SRNG drives value of this register bit
+* into security_id port of GXI/AXI. */
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_M           0x04
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_S           2
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_M) >> \
+        HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_S)
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_S)); \
+        } while (0)
+
+/* During MSI write operation, SRNG drives value of this register bit into
+* swap bit of GXI/AXI. */
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_M           0x08
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_S           3
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_M) >> \
+        HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_S)
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_SET(_var, _val) \
+        do {														 \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_S)); \
+        } while (0)
+
+/* During Pointer write operation, SRNG drives value of this register bit into
+* swap bit of GXI/AXI. */
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_M       0x10
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_S       4
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_M) >> \
+        HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_S)
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_S)); \
+        } while (0)
+
+/* During any data or TLV write operation, SRNG drives value of this register
+* bit into swap bit of GXI/AXI. */
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_M           0x20
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_S           5
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_GET(_var)    \
+        (((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_M) >> \
+        HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_S)
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RESERVED1                 0x40
+#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RESERVED2                 0x80
+
+
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_M  0xffffffff
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_S  0
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_M) >> \
+                HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_S)
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_M 0xffffffff
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_S 0
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_M) >> \
+                HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_S)
+#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_M 0xffffffff
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_S 0
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_M) >> \
+                HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_S)
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_M 0xffffffff
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_S 0
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_M) >> \
+                HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_S)
+#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_M        0xffffffff
+#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_S        0
+#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MSI_ADDR_LO_M) >> \
+                HTT_SRING_SETUP_RING_MSI_ADDR_LO_S)
+#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MSI_ADDR_LO, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MSI_ADDR_LO_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_M        0xffffffff
+#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_S        0
+#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MSI_ADDR_HI_M) >> \
+                HTT_SRING_SETUP_RING_MSI_ADDR_HI_S)
+#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MSI_ADDR_HI, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MSI_ADDR_HI_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RING_MSI_DATA_M          0xffffffff
+#define HTT_SRING_SETUP_RING_MSI_DATA_S          0
+#define HTT_SRING_SETUP_RING_MSI_DATA_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RING_MSI_DATA_M) >> \
+                HTT_SRING_SETUP_RING_MSI_DATA_S)
+#define HTT_SRING_SETUP_RING_MSI_DATA_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MSI_DATA, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RING_MSI_DATA_S)); \
+        } while (0)
+
+
+
+#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_M    0x00007fff
+#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_S    0
+#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_M) >> \
+                HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_S)
+#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_SW_INTR_MODE_M             0x00008000
+#define HTT_SRING_SETUP_SW_INTR_MODE_S             15
+#define HTT_SRING_SETUP_SW_INTR_MODE_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_SW_INTR_MODE_M) >> \
+                HTT_SRING_SETUP_SW_INTR_MODE_S)
+#define HTT_SRING_SETUP_SW_INTR_MODE_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_SW_INTR_MODE, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_SW_INTR_MODE_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_INTR_TIMER_TH_M            0xffff0000
+#define HTT_SRING_SETUP_INTR_TIMER_TH_S            16
+#define HTT_SRING_SETUP_INTR_TIMER_TH_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_INTR_TIMER_TH_M) >> \
+                HTT_SRING_SETUP_INTR_TIMER_TH_S)
+#define HTT_SRING_SETUP_INTR_TIMER_TH_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_INTR_TIMER_TH, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_INTR_TIMER_TH_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_INTR_LOW_TH_M              0x0000ffff
+#define HTT_SRING_SETUP_INTR_LOW_TH_S              0
+#define HTT_SRING_SETUP_INTR_LOW_TH_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_INTR_LOW_TH_M) >> \
+                HTT_SRING_SETUP_INTR_LOW_TH_S)
+#define HTT_SRING_SETUP_INTR_LOW_TH_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_INTR_LOW_TH, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_INTR_LOW_TH_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_M       0x00070000
+#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_S       16
+#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_PREFETCH_TIMER_CFG_M) >> \
+                HTT_SRING_SETUP_PREFETCH_TIMER_CFG_S)
+#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_PREFETCH_TIMER_CFG, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_PREFETCH_TIMER_CFG_S)); \
+        } while (0)
+
+#define HTT_SRING_SETUP_RESPONSE_REQUIRED_M        0x00080000
+#define HTT_SRING_SETUP_RESPONSE_REQUIRED_S        19
+#define HTT_SRING_SETUP_RESPONSE_REQUIRED_GET(_var) \
+        (((_var) & HTT_SRING_SETUP_RESPONSE_REQUIRED_M) >> \
+                HTT_SRING_SETUP_RESPONSE_REQUIRED_S)
+#define HTT_SRING_SETUP_RESPONSE_REQUIRED_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RESPONSE_REQUIRED, _val); \
+            ((_var) |= ((_val) << HTT_SRING_SETUP_RESPONSE_REQUIRED_S)); \
+        } while (0)
+
+
+/**
+ * @brief HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG Message
+ *
+ * @details
+ *    HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG message is sent by host to
+ *    configure RXDMA rings.
+ *    The configuration is per ring based and includes both packet subtypes
+ *    and PPDU/MPDU TLVs.
+ *
+ *    The message would appear as follows:
+ *
+ *    |31       26|25|24|23            16|15             8|7             0|
+ *    |-----------------+----------------+----------------+---------------|
+ *    |   rsvd1   |PS|SS|     ring_id    |     pdev_id    |    msg_type   |
+ *    |-------------------------------------------------------------------|
+ *    |              rsvd2               |           ring_buffer_size     |
+ *    |-------------------------------------------------------------------|
+ *    |                        packet_type_enable_flags_0                 |
+ *    |-------------------------------------------------------------------|
+ *    |                        packet_type_enable_flags_1                 |
+ *    |-------------------------------------------------------------------|
+ *    |                        packet_type_enable_flags_2                 |
+ *    |-------------------------------------------------------------------|
+ *    |                        packet_type_enable_flags_3                 |
+ *    |-------------------------------------------------------------------|
+ *    |                         tlv_filter_in_flags                       |
+ *    |-------------------------------------------------------------------|
+ * Where:
+ *     PS = pkt_swap
+ *     SS = status_swap
+ * The message is interpreted as follows:
+ * dword0 - b'0:7   - msg_type: This will be set to
+ *                    HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG
+ *          b'8:15  - pdev_id:
+ *                    0 (for rings at SOC/UMAC level),
+ *                    1/2/3 mac id (for rings at LMAC level)
+ *          b'16:23 - ring_id : Identify the ring to configure.
+ *                    More details can be got from enum htt_srng_ring_id
+ *          b'24    - status_swap: 1 is to swap status TLV
+ *          b'25    - pkt_swap:  1 is to swap packet TLV
+ *          b'26:31 - rsvd1:  reserved for future use
+ * dword1 - b'0:16  - ring_buffer_size: size of bufferes referenced by rx ring,
+ *                    in byte units.
+ *                    Valid only for HW_TO_SW_RING and SW_TO_HW_RING
+ *        - b'16:31 - rsvd2: Reserved for future use
+ * dword2 - b'0:31  - packet_type_enable_flags_0:
+ *                    Enable MGMT packet from 0b0000 to 0b1001
+ *                    bits from low to high: FP, MD, MO - 3 bits
+ *                        FP: Filter_Pass
+ *                        MD: Monitor_Direct
+ *                        MO: Monitor_Other
+ *                    10 mgmt subtypes * 3 bits -> 30 bits
+ *                    Refer to PKT_TYPE_ENABLE_FLAG0_xxx_MGMT_xxx defs
+ * dword3 - b'0:31  - packet_type_enable_flags_1:
+ *                    Enable MGMT packet from 0b1010 to 0b1111
+ *                    bits from low to high: FP, MD, MO - 3 bits
+ *                    Refer to PKT_TYPE_ENABLE_FLAG1_xxx_MGMT_xxx defs
+ * dword4 - b'0:31 -  packet_type_enable_flags_2:
+ *                    Enable CTRL packet from 0b0000 to 0b1001
+ *                    bits from low to high: FP, MD, MO - 3 bits
+ *                    Refer to PKT_TYPE_ENABLE_FLAG2_xxx_CTRL_xxx defs
+ * dword5 - b'0:31  - packet_type_enable_flags_3:
+ *                    Enable CTRL packet from 0b1010 to 0b1111,
+ *                    MCAST_DATA, UCAST_DATA, NULL_DATA
+ *                    bits from low to high: FP, MD, MO - 3 bits
+ *                    Refer to PKT_TYPE_ENABLE_FLAG3_xxx_CTRL_xxx defs
+ * dword6 - b'0:31 -  tlv_filter_in_flags:
+ *                    Filter in Attention/MPDU/PPDU/Header/User tlvs
+ *                    Refer to CFG_TLV_FILTER_IN_FLAG defs
+ */
+PREPACK struct htt_rx_ring_selection_cfg_t {
+    A_UINT32 msg_type:    8,
+             pdev_id:     8,
+             ring_id:     8,
+             status_swap: 1,
+             pkt_swap:    1,
+             rsvd1:       6;
+    A_UINT32 ring_buffer_size: 16,
+             rsvd2:            16;
+    A_UINT32 packet_type_enable_flags_0;
+    A_UINT32 packet_type_enable_flags_1;
+    A_UINT32 packet_type_enable_flags_2;
+    A_UINT32 packet_type_enable_flags_3;
+    A_UINT32 tlv_filter_in_flags;
+} POSTPACK;
+
+#define HTT_RX_RING_SELECTION_CFG_SZ    (sizeof(struct htt_rx_ring_selection_cfg_t))
+
+#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_M                    0x0000ff00
+#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_S                    8
+#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_PDEV_ID_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_PDEV_ID_S)
+#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PDEV_ID, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PDEV_ID_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_RING_ID_M                    0x00ff0000
+#define HTT_RX_RING_SELECTION_CFG_RING_ID_S                    16
+#define HTT_RX_RING_SELECTION_CFG_RING_ID_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_RING_ID_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_RING_ID_S)
+#define HTT_RX_RING_SELECTION_CFG_RING_ID_SET(_var, _val)            \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RING_ID, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RING_ID_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_M            0x01000000
+#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_S            24
+#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_S)
+#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_M               0x02000000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_S               25
+#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_S)
+#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_M           0x0000ffff
+#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_S           0
+#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_S)
+#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE, _val);  \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_M     0xffffffff
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_S     0
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_S)
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_M     0xffffffff
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_S     0
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_S)
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_M     0xffffffff
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_S     0
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_S)
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_M     0xffffffff
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_S     0
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_S)
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_S)); \
+            } while (0)
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_M         0xffffffff
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_S         0
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_GET(_var) \
+            (((_var) & HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_M) >> \
+                    HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_S)
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_SET(_var, _val) \
+            do { \
+                HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG, _val); \
+                ((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_S)); \
+            } while (0)
+
+/*
+ * Subtype based MGMT frames enable bits.
+ * FP: Filter_Pass, MD: Monitor_Direct MO: Monitor_Other
+ */
+/* association request */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0000_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0000_S 0
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0000_M 0x00000002
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0000_S 1
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0000_M 0x00000004
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0000_S 2
+
+/* association response */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0001_M 0x00000008
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0001_S 3
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0001_M 0x00000010
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0001_S 4
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0001_M 0x00000020
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0001_S 5
+
+/* Reassociation request */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0010_M 0x00000040
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0010_S 6
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0010_M 0x00000080
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0010_S 7
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0010_M 0x00000100
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0010_S 8
+
+/* Reassociation response */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0011_M 0x00000200
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0011_S 9
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0011_M 0x00000400
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0011_S 10
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0011_M 0x00000800
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0011_S 11
+
+/* Probe request */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0100_M 0x00001000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0100_S 12
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0100_M 0x00002000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0100_S 13
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0100_M 0x00004000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0100_S 14
+
+/* Probe response  */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0101_M 0x00008000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0101_S 15
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0101_M 0x00010000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0101_S 16
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0101_M 0x00020000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0101_S 17
+
+/* Timing Advertisement */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0110_M 0x00040000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0110_S 18
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0110_M 0x00080000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0110_S 19
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0110_M 0x00100000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0110_S 20
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0111_M 0x00200000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0111_S 21
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0111_M 0x00400000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0111_S 22
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0111_M 0x00800000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0111_S 23
+
+/* Beacon */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1000_M 0x01000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1000_S 24
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1000_M 0x02000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1000_S 25
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1000_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1000_S 26
+
+/* ATIM */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1001_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1001_S 27
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1001_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1001_S 28
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1001_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1001_S 29
+
+/* Disassociation */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1010_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1010_S 0
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1010_M 0x00000002
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1010_S 1
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1010_M 0x00000004
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1010_S 2
+
+/* Authentication */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1011_M 0x00000008
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1011_S 3
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1011_M 0x00000010
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1011_S 4
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1011_M 0x00000020
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1011_S 5
+
+/* Deauthentication */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1100_M 0x00000040
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1100_S 6
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1100_M 0x00000080
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1100_S 7
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1100_M 0x00000100
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1100_S 8
+
+/* Action */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1101_M 0x00000200
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1101_S 9
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1101_M 0x00000400
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1101_S 10
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1101_M 0x00000800
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1101_S 11
+
+/* Action No Ack */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1110_M 0x00001000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1110_S 12
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1110_M 0x00002000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1110_S 13
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1110_M 0x00004000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1110_S 14
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1111_M 0x00008000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1111_S 15
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1111_M 0x00010000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1111_S 16
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1111_M 0x00020000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1111_S 17
+
+/*
+ * Subtype based CTRL frames enable bits.
+ * FP: Filter_Pass, MD: Monitor_Direct, MO: Monitor_Other
+ */
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0000_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0000_S 0
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0000_M 0x00000002
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0000_S 1
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0000_M 0x00000004
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0000_S 2
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0001_M 0x00000008
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0001_S 3
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0001_M 0x00000010
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0001_S 4
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0001_M 0x00000020
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0001_S 5
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0010_M 0x00000040
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0010_S 6
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0010_M 0x00000080
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0010_S 7
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0010_M 0x00000100
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0010_S 8
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0011_M 0x00000200
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0011_S 9
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0011_M 0x00000400
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0011_S 10
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0011_M 0x00000800
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0011_S 11
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0100_M 0x00001000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0100_S 12
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0100_M 0x00002000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0100_S 13
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0100_M 0x00004000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0100_S 14
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0101_M 0x00008000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0101_S 15
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0101_M 0x00010000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0101_S 16
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0101_M 0x00020000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0101_S 17
+
+/* Reserved */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0110_M 0x00040000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0110_S 18
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0110_M 0x00080000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0110_S 19
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0110_M 0x00100000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0110_S 20
+
+/* Control Wrapper */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0111_M 0x00200000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0111_S 21
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0111_M 0x00400000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0111_S 22
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0111_M 0x00800000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0111_S 23
+
+/* Block Ack Request */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1000_M 0x01000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1000_S 24
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1000_M 0x02000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1000_S 25
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1000_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1000_S 26
+
+/* Block Ack*/
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1001_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1001_S 27
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1001_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1001_S 28
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1001_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1001_S 29
+
+/* PS-POLL */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1010_M 0x00000001
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1010_S 0
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1010_M 0x00000002
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1010_S 1
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1010_M 0x00000004
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1010_S 2
+
+/* RTS */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1011_M 0x00000008
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1011_S 3
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1011_M 0x00000010
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1011_S 4
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1011_M 0x00000020
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1011_S 5
+
+/* CTS */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1100_M 0x00000040
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1100_S 6
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1100_M 0x00000080
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1100_S 7
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1100_M 0x00000100
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1100_S 8
+
+/* ACK */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1101_M 0x00000200
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1101_S 9
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1101_M 0x00000400
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1101_S 10
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1101_M 0x00000800
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1101_S 11
+
+/* CF-END */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1110_M 0x00001000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1110_S 12
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1110_M 0x00002000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1110_S 13
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1110_M 0x00004000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1110_S 14
+
+/* CF-END + CF-ACK */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1111_M 0x00008000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1111_S 15
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1111_M 0x00010000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1111_S 16
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1111_M 0x00020000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1111_S 17
+
+/* Multicast data */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_MCAST_M 0x00040000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_MCAST_S 18
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_MCAST_M 0x00080000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_MCAST_S 19
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_MCAST_M 0x00100000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_MCAST_S 20
+
+/* Unicast data */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_UCAST_M 0x00200000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_UCAST_S 21
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_UCAST_M 0x00400000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_UCAST_S 22
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_UCAST_M 0x00800000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_UCAST_S 23
+
+/* NULL data */
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_NULL_M 0x01000000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_NULL_S 24
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_NULL_M 0x02000000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_NULL_S 25
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_NULL_M 0x04000000
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_NULL_S 26
+
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_SET(word, httsym, value) \
+            do { \
+                HTT_CHECK_SET_VAL(httsym, value); \
+                (word) |= (value) << httsym##_S; \
+            } while (0)
+#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_GET(word, httsym) \
+            (((word) & httsym##_M) >> httsym##_S)
+
+#define htt_rx_ring_pkt_enable_subtype_set( \
+    word, flag, mode, type, subtype, val) \
+    HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_SET( \
+        word, HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_##flag##_##mode##_##type##_##subtype, val)
+
+#define htt_rx_ring_pkt_enable_subtype_get( \
+    word, flag, mode, type, subtype) \
+    HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_GET( \
+        word, HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_##flag##_##mode##_##type##_##subtype)
+
+/* Definition to filter in TLVs */
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_START_M               0x00000001
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_START_S               0
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_START_M               0x00000002
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_START_S               1
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_M                   0x00000004
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_S                   2
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_END_M                 0x00000008
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_END_S                 3
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_END_M                 0x00000010
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_END_S                 4
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_HEADER_M            0x00000020
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_HEADER_S            5
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED_M                 0x00000040
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED_S                 6
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_ATTENTION_M                0x00000080
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_ATTENTION_S                7
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_START_M               0x00000100
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_START_S               8
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_M                 0x00000200
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_S                 9
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_M      0x00000400
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_S      10
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_EXT_M  0x00000800
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_EXT_S  11
+
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_STATUS_DONE_M     0x00001000
+#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_STATUS_DONE_S     12
+
+#define HTT_RX_RING_TLV_ENABLE_SET(word, httsym, enable) \
+            do { \
+                HTT_CHECK_SET_VAL(httsym, enable); \
+                (word) |= (enable) << httsym##_S; \
+            } while (0)
+#define HTT_RX_RING_TLV_ENABLE_GET(word, httsym) \
+            (((word) & httsym##_M) >> httsym##_S)
+
+#define htt_rx_ring_tlv_filter_in_enable_set(word, tlv, enable) \
+    HTT_RX_RING_TLV_ENABLE_SET( \
+        word, HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_##tlv, enable)
+
+#define htt_rx_ring_tlv_filter_in_enable_get(word, tlv) \
+    HTT_RX_RING_TLV_ENABLE_GET( \
+        word, HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_##tlv)
+
+/**
+ * @brief HTT_H2T_MSG_TYPE_RFS_CONFIG
+ * host --> target Receive Flow Steering configuration message definition.
+ * Host must send this message before sending HTT_H2T_MSG_TYPE_RX_RING_CFG.
+ * The reason for this is we want RFS to be configured and ready before MAC
+ * remote ring is enabled via HTT_H2T_MSG_TYPE_RX_RING_CFG.
+ *
+ *     |31            24|23            16|15           9|8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |                   reserved                     |E|    msg type    |
+ *     |-------------------------------------------------------------------|
+ *     Where E = RFS enable flag
+ *
+ * The RFS_CONFIG message consists of a single 4-byte word.
+ *
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a RFS config msg
+ *     Value: 0xf (HTT_H2T_MSG_TYPE_RFS_CONFIG)
+ *   - RFS_CONFIG
+ *     Bit 8
+ *     Purpose: Tells target whether to enable (1) or disable (0)
+ *         flow steering feature when sending rx indication messages to host
+ */
+#define HTT_H2T_RFS_CONFIG_M      0x100
+#define HTT_H2T_RFS_CONFIG_S      8
+#define HTT_RX_RFS_CONFIG_GET(_var)    \
+    (((_var) & HTT_H2T_RFS_CONFIG_M) >> \
+        HTT_H2T_RFS_CONFIG_S)
+#define HTT_RX_RFS_CONFIG_SET(_var, _val)            \
+    do {                                              \
+        HTT_CHECK_SET_VAL(HTT_H2T_RFS_CONFIG, _val);  \
+        ((_var) |= ((_val) << HTT_H2T_RFS_CONFIG_S)); \
+    } while (0)
+
+
+/*=== target -> host messages ===============================================*/
+
+
+enum htt_t2h_msg_type {
+    HTT_T2H_MSG_TYPE_VERSION_CONF             = 0x0,
+    HTT_T2H_MSG_TYPE_RX_IND                   = 0x1,
+    HTT_T2H_MSG_TYPE_RX_FLUSH                 = 0x2,
+    HTT_T2H_MSG_TYPE_PEER_MAP                 = 0x3,
+    HTT_T2H_MSG_TYPE_PEER_UNMAP               = 0x4,
+    HTT_T2H_MSG_TYPE_RX_ADDBA                 = 0x5,
+    HTT_T2H_MSG_TYPE_RX_DELBA                 = 0x6,
+    HTT_T2H_MSG_TYPE_TX_COMPL_IND             = 0x7,
+    HTT_T2H_MSG_TYPE_PKTLOG                   = 0x8,
+    HTT_T2H_MSG_TYPE_STATS_CONF               = 0x9,
+    HTT_T2H_MSG_TYPE_RX_FRAG_IND              = 0xa,
+    HTT_T2H_MSG_TYPE_SEC_IND                  = 0xb,
+    DEPRECATED_HTT_T2H_MSG_TYPE_RC_UPDATE_IND = 0xc, /* no longer used */
+    HTT_T2H_MSG_TYPE_TX_INSPECT_IND           = 0xd,
+    HTT_T2H_MSG_TYPE_MGMT_TX_COMPL_IND        = 0xe,
+    /* only used for HL, add HTT MSG for HTT CREDIT update */
+    HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND     = 0xf,
+    HTT_T2H_MSG_TYPE_RX_PN_IND                = 0x10,
+    HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND   = 0x11,
+    HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND      = 0x12,
+    /* 0x13 is reserved for RX_RING_LOW_IND (RX Full reordering related) */
+    HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE      = 0x14,
+    HTT_T2H_MSG_TYPE_CHAN_CHANGE              = 0x15,
+    HTT_T2H_MSG_TYPE_RX_OFLD_PKT_ERR          = 0x16,
+    HTT_T2H_MSG_TYPE_RATE_REPORT              = 0x17,
+    HTT_T2H_MSG_TYPE_FLOW_POOL_MAP            = 0x18,
+    HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP          = 0x19,
+    HTT_T2H_MSG_TYPE_SRING_SETUP_DONE         = 0x1a,
+    HTT_T2H_MSG_TYPE_MAP_FLOW_INFO            = 0x1b,
+
+    HTT_T2H_MSG_TYPE_TEST,
+    /* keep this last */
+    HTT_T2H_NUM_MSGS
+};
+
+/*
+ * HTT target to host message type -
+ * stored in bits 7:0 of the first word of the message
+ */
+#define HTT_T2H_MSG_TYPE_M      0xff
+#define HTT_T2H_MSG_TYPE_S      0
+
+#define HTT_T2H_MSG_TYPE_SET(word, msg_type)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE, msg_type); \
+        (word) |= ((msg_type) << HTT_T2H_MSG_TYPE_S);  \
+    } while (0)
+#define HTT_T2H_MSG_TYPE_GET(word) \
+    (((word) & HTT_T2H_MSG_TYPE_M) >> HTT_T2H_MSG_TYPE_S)
+
+/**
+ * @brief target -> host version number confirmation message definition
+ *
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |    reserved    |  major number  |  minor number  |    msg type    |
+ *     |-------------------------------------------------------------------|
+ *     :                    option request TLV (optional)                  |
+ *     :...................................................................:
+ *
+ * The VER_CONF message may consist of a single 4-byte word, or may be
+ * extended with TLVs that specify HTT options selected by the target.
+ * The following option TLVs may be appended to the VER_CONF message:
+ *   - LL_BUS_ADDR_SIZE
+ *   - HL_SUPPRESS_TX_COMPL_IND
+ *   - MAX_TX_QUEUE_GROUPS
+ * These TLVs may appear in an arbitrary order.  Any number of these TLVs
+ * may be appended to the VER_CONF message (but only one TLV of each type).
+ *
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a version number confirmation message
+ *     Value: 0x0
+ *   - VER_MINOR
+ *     Bits 15:8
+ *     Purpose: Specify the minor number of the HTT message library version
+ *         in use by the target firmware.
+ *         The minor number specifies the specific revision within a range
+ *         of fundamentally compatible HTT message definition revisions.
+ *         Compatible revisions involve adding new messages or perhaps
+ *         adding new fields to existing messages, in a backwards-compatible
+ *         manner.
+ *         Incompatible revisions involve changing the message type values,
+ *         or redefining existing messages.
+ *     Value: minor number
+ *   - VER_MAJOR
+ *     Bits 15:8
+ *     Purpose: Specify the major number of the HTT message library version
+ *         in use by the target firmware.
+ *         The major number specifies the family of minor revisions that are
+ *         fundamentally compatible with each other, but not with prior or
+ *         later families.
+ *     Value: major number
+ */
+
+#define HTT_VER_CONF_MINOR_M      0x0000ff00
+#define HTT_VER_CONF_MINOR_S      8
+#define HTT_VER_CONF_MAJOR_M      0x00ff0000
+#define HTT_VER_CONF_MAJOR_S      16
+
+
+#define HTT_VER_CONF_MINOR_SET(word, value)                              \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_VER_CONF_MINOR, value);                    \
+        (word) |= (value)  << HTT_VER_CONF_MINOR_S;                      \
+    } while (0)
+#define HTT_VER_CONF_MINOR_GET(word) \
+    (((word) & HTT_VER_CONF_MINOR_M) >> HTT_VER_CONF_MINOR_S)
+
+#define HTT_VER_CONF_MAJOR_SET(word, value)                              \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_VER_CONF_MAJOR, value);                    \
+        (word) |= (value)  << HTT_VER_CONF_MAJOR_S;                      \
+    } while (0)
+#define HTT_VER_CONF_MAJOR_GET(word) \
+    (((word) & HTT_VER_CONF_MAJOR_M) >> HTT_VER_CONF_MAJOR_S)
+
+
+#define HTT_VER_CONF_BYTES 4
+
+
+/**
+ * @brief - target -> host HTT Rx In order indication message
+ *
+ * @details
+ *
+ * |31            24|23                 |15|14|13|12|11|10|9|8|7|6|5|4       0|
+ * |----------------+-------------------+---------------------+---------------|
+ * |                  peer ID           | P| F| O| ext TID    |   msg type    |
+ * |--------------------------------------------------------------------------|
+ * |                  MSDU count        |        Reserved     |   vdev id     |
+ * |--------------------------------------------------------------------------|
+ * |                        MSDU 0 bus address (bits 31:0)                    |
+#if HTT_PADDR64
+ * |                        MSDU 0 bus address (bits 63:32)                   |
+#endif
+ * |--------------------------------------------------------------------------|
+ * |    MSDU info   | MSDU 0 FW Desc    |         MSDU 0 Length               |
+ * |--------------------------------------------------------------------------|
+ * |                        MSDU 1 bus address (bits 31:0)                    |
+#if HTT_PADDR64
+ * |                        MSDU 1 bus address (bits 63:32)                   |
+#endif
+ * |--------------------------------------------------------------------------|
+ * |    MSDU info   | MSDU 1 FW Desc    |         MSDU 1 Length               |
+ * |--------------------------------------------------------------------------|
+ */
+
+
+/** @brief - MSDU info byte for TCP_CHECKSUM_OFFLOAD use
+ *
+ * @details
+ *                            bits
+ * |  7  | 6  |   5   |    4   |   3    |    2    |    1    |     0     |
+ * |-----+----+-------+--------+--------+---------+---------+-----------|
+ * | reserved | is IP | is UDP | is TCP | is IPv6 |IP chksum|  TCP/UDP  |
+ * |          | frag  |        |        |         | fail    |chksum fail|
+ * |-----+----+-------+--------+--------+---------+---------+-----------|
+ * (see fw_rx_msdu_info def in wal_rx_desc.h)
+ */
+
+struct htt_rx_in_ord_paddr_ind_hdr_t
+{
+    A_UINT32 /* word 0 */
+        msg_type:   8,
+        ext_tid:    5,
+        offload:    1,
+        frag:       1,
+        pktlog:     1, /* tell host whether to store MSDUs referenced in this message in pktlog */
+        peer_id:    16;
+
+    A_UINT32 /* word 1 */
+        vap_id:     8,
+        reserved_1: 8,
+        msdu_cnt:   16;
+};
+
+struct htt_rx_in_ord_paddr_ind_msdu32_t
+{
+    A_UINT32 dma_addr;
+    A_UINT32
+        length: 16,
+        fw_desc: 8,
+        msdu_info:8;
+};
+struct htt_rx_in_ord_paddr_ind_msdu64_t
+{
+    A_UINT32 dma_addr_lo;
+    A_UINT32 dma_addr_hi;
+    A_UINT32
+        length: 16,
+        fw_desc: 8,
+        msdu_info:8;
+};
+#if HTT_PADDR64
+    #define htt_rx_in_ord_paddr_ind_msdu_t htt_rx_in_ord_paddr_ind_msdu64_t
+#else
+    #define htt_rx_in_ord_paddr_ind_msdu_t htt_rx_in_ord_paddr_ind_msdu32_t
+#endif
+
+
+#define HTT_RX_IN_ORD_PADDR_IND_HDR_BYTES (sizeof(struct htt_rx_in_ord_paddr_ind_hdr_t))
+#define HTT_RX_IN_ORD_PADDR_IND_HDR_DWORDS (HTT_RX_IN_ORD_PADDR_IND_HDR_BYTES >> 2)
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTE_OFFSET  HTT_RX_IN_ORD_PADDR_IND_HDR_BYTES
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORD_OFFSET HTT_RX_IN_ORD_PADDR_IND_HDR_DWORDS
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_64 (sizeof(struct htt_rx_in_ord_paddr_ind_msdu64_t))
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORDS_64 (HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_64 >> 2)
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_32 (sizeof(struct htt_rx_in_ord_paddr_ind_msdu32_t))
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORDS_32 (HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_32 >> 2)
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES (sizeof(struct htt_rx_in_ord_paddr_ind_msdu_t))
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORDS (HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES >> 2)
+
+#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_M      0x00001f00
+#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_S      8
+#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_M      0x00002000
+#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_S      13
+#define HTT_RX_IN_ORD_PADDR_IND_FRAG_M         0x00004000
+#define HTT_RX_IN_ORD_PADDR_IND_FRAG_S         14
+#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_M       0x00008000
+#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_S       15
+#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_M      0xffff0000
+#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_S      16
+#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_M       0x000000ff
+#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_S       0
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_M     0xffff0000
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_S     16
+/* for systems using 64-bit format for bus addresses */
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_M     0xffffffff
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_S     0
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_M     0xffffffff
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_S     0
+/* for systems using 32-bit format for bus addresses */
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_M        0xffffffff
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_S        0
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_M     0x0000ffff
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_S     0
+#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_M      0x00ff0000
+#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_S      16
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_M    0xff000000
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_S    24
+
+
+#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_SET(word, value)                              \
+    do {                                                                        \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_EXT_TID, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_EXT_TID_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_EXT_TID_M) >> HTT_RX_IN_ORD_PADDR_IND_EXT_TID_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_SET(word, value)                              \
+    do {                                                                        \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PEER_ID, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_PEER_ID_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_PEER_ID_M) >> HTT_RX_IN_ORD_PADDR_IND_PEER_ID_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_SET(word, value)                              \
+    do {                                                                       \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_VAP_ID, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_VAP_ID_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_VAP_ID_M) >> HTT_RX_IN_ORD_PADDR_IND_VAP_ID_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_SET(word, value)                              \
+    do {                                                                        \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_M) >> HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_S)
+
+/* for systems using 64-bit format for bus addresses */
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_SET(word, value)                     \
+    do {                                                                      \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PADDR_HI, value);           \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_S;             \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_M) >> HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_S)
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_SET(word, value)                     \
+        do {                                                                  \
+            HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PADDR_LO, value);       \
+            (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_S;         \
+        } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_GET(word) \
+        (((word) & HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_M) >> HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_S)
+
+/* for systems using 32-bit format for bus addresses */
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_SET(word, value)                        \
+    do {                                                                      \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PADDR, value);              \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_PADDR_S;                \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_PADDR_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_PADDR_M) >> HTT_RX_IN_ORD_PADDR_IND_PADDR_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_SET(word, value)                              \
+    do {                                                                         \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_M) >> HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_SET(word, value)                              \
+    do {                                                                       \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_FW_DESC, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_FW_DESC_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_FW_DESC_M) >> HTT_RX_IN_ORD_PADDR_IND_FW_DESC_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_SET(word, value)                              \
+    do {                                                                       \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_M) >> HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_SET(word, value)                              \
+    do {                                                                        \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_IND_OFFLOAD, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_IND_OFFLOAD_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_M) >> HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_FRAG_SET(word, value)                              \
+    do {                                                                        \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_IND_FRAG, value);                    \
+        (word) |= (value)  << HTT_RX_IN_ORD_IND_FRAG_S;                      \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_FRAG_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_FRAG_M) >> HTT_RX_IN_ORD_PADDR_IND_FRAG_S)
+
+#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_SET(word, value) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PKTLOG, value); \
+        (word) |= (value)  << HTT_RX_IN_ORD_PADDR_IND_PKTLOG_S; \
+    } while (0)
+#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_GET(word) \
+    (((word) & HTT_RX_IN_ORD_PADDR_IND_PKTLOG_M) >> HTT_RX_IN_ORD_PADDR_IND_PKTLOG_S)
+
+
+/* definitions used within target -> host rx indication message */
+
+PREPACK struct htt_rx_ind_hdr_prefix_t
+{
+    A_UINT32 /* word 0 */
+        msg_type:      8,
+        ext_tid:       5,
+        release_valid: 1,
+        flush_valid:   1,
+        reserved0:     1,
+        peer_id:       16;
+
+    A_UINT32 /* word 1 */
+        flush_start_seq_num:   6,
+        flush_end_seq_num:     6,
+        release_start_seq_num: 6,
+        release_end_seq_num:   6,
+        num_mpdu_ranges:       8;
+} POSTPACK;
+
+#define HTT_RX_IND_HDR_PREFIX_BYTES (sizeof(struct htt_rx_ind_hdr_prefix_t))
+#define HTT_RX_IND_HDR_PREFIX_SIZE32 (HTT_RX_IND_HDR_PREFIX_BYTES >> 2)
+
+#define HTT_TGT_RSSI_INVALID 0x80
+
+PREPACK struct htt_rx_ppdu_desc_t
+{
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI_CMB              0
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_TIMESTAMP_SUBMICROSEC 0
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_PHY_ERR_CODE          0
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_PHY_ERR               0
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_LEGACY_RATE           0
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_LEGACY_RATE_SEL       0
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_END_VALID             0
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_START_VALID           0
+    A_UINT32 /* word 0 */
+        rssi_cmb: 8,
+        timestamp_submicrosec: 8,
+        phy_err_code: 8,
+        phy_err: 1,
+        legacy_rate: 4,
+        legacy_rate_sel: 1,
+        end_valid: 1,
+        start_valid: 1;
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI0 1
+    union {
+        A_UINT32 /* word 1 */
+            rssi0_pri20: 8,
+            rssi0_ext20: 8,
+            rssi0_ext40: 8,
+            rssi0_ext80: 8;
+       A_UINT32 rssi0; /* access all 20/40/80 per-bandwidth RSSIs together */
+    } u0;
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI1 2
+    union {
+        A_UINT32 /* word 2 */
+            rssi1_pri20: 8,
+            rssi1_ext20: 8,
+            rssi1_ext40: 8,
+            rssi1_ext80: 8;
+       A_UINT32 rssi1; /* access all 20/40/80 per-bandwidth RSSIs together */
+    } u1;
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI2 3
+    union {
+        A_UINT32 /* word 3 */
+            rssi2_pri20: 8,
+            rssi2_ext20: 8,
+            rssi2_ext40: 8,
+            rssi2_ext80: 8;
+       A_UINT32 rssi2; /* access all 20/40/80 per-bandwidth RSSIs together */
+    } u2;
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI3 4
+    union {
+        A_UINT32 /* word 4 */
+            rssi3_pri20: 8,
+            rssi3_ext20: 8,
+            rssi3_ext40: 8,
+            rssi3_ext80: 8;
+       A_UINT32 rssi3; /* access all 20/40/80 per-bandwidth RSSIs together */
+    } u3;
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_TSF32 5
+    A_UINT32 tsf32; /* word 5 */
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_TIMESTAMP_MICROSEC 6
+    A_UINT32 timestamp_microsec; /* word 6 */
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_PREAMBLE_TYPE 7
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_VHT_SIG_A1    7
+    A_UINT32 /* word 7 */
+        vht_sig_a1: 24,
+        preamble_type: 8;
+
+    #define HTT_RX_IND_PPDU_OFFSET_WORD_VHT_SIG_A2    8
+    A_UINT32 /* word 8 */
+        vht_sig_a2: 24,
+        reserved0: 8;
+} POSTPACK;
+
+#define HTT_RX_PPDU_DESC_BYTES (sizeof(struct htt_rx_ppdu_desc_t))
+#define HTT_RX_PPDU_DESC_SIZE32 (HTT_RX_PPDU_DESC_BYTES >> 2)
+
+PREPACK struct htt_rx_ind_hdr_suffix_t
+{
+    A_UINT32 /* word 0 */
+        fw_rx_desc_bytes: 16,
+        reserved0: 16;
+} POSTPACK;
+
+#define HTT_RX_IND_HDR_SUFFIX_BYTES (sizeof(struct htt_rx_ind_hdr_suffix_t))
+#define HTT_RX_IND_HDR_SUFFIX_SIZE32 (HTT_RX_IND_HDR_SUFFIX_BYTES >> 2)
+
+PREPACK struct htt_rx_ind_hdr_t
+{
+    struct htt_rx_ind_hdr_prefix_t prefix;
+    struct htt_rx_ppdu_desc_t      rx_ppdu_desc;
+    struct htt_rx_ind_hdr_suffix_t suffix;
+} POSTPACK;
+
+#define HTT_RX_IND_HDR_BYTES (sizeof(struct htt_rx_ind_hdr_t))
+#define HTT_RX_IND_HDR_SIZE32 (HTT_RX_IND_HDR_BYTES >> 2)
+
+/* confirm that HTT_RX_IND_HDR_BYTES is a multiple of 4 */
+A_COMPILE_TIME_ASSERT(HTT_RX_IND_hdr_size_quantum,
+    (HTT_RX_IND_HDR_BYTES & 0x3) == 0);
+
+/*
+ * HTT_RX_IND_FW_RX_PPDU_DESC_BYTE_OFFSET:
+ * the offset into the HTT rx indication message at which the
+ * FW rx PPDU descriptor resides
+ */
+#define HTT_RX_IND_FW_RX_PPDU_DESC_BYTE_OFFSET HTT_RX_IND_HDR_PREFIX_BYTES
+
+/*
+ * HTT_RX_IND_HDR_SUFFIX_BYTE_OFFSET:
+ * the offset into the HTT rx indication message at which the
+ * header suffix (FW rx MSDU byte count) resides
+ */
+#define HTT_RX_IND_HDR_SUFFIX_BYTE_OFFSET \
+    (HTT_RX_IND_FW_RX_PPDU_DESC_BYTE_OFFSET + HTT_RX_PPDU_DESC_BYTES)
+
+/*
+ * HTT_RX_IND_FW_RX_DESC_BYTE_OFFSET:
+ * the offset into the HTT rx indication message at which the per-MSDU
+ * information starts
+ * Bytes 0-7 are the message header; bytes 8-11 contain the length of the
+ * per-MSDU information portion of the message.  The per-MSDU info itself
+ * starts at byte 12.
+ */
+#define HTT_RX_IND_FW_RX_DESC_BYTE_OFFSET HTT_RX_IND_HDR_BYTES
+
+
+/**
+ * @brief target -> host rx indication message definition
+ *
+ * @details
+ * The following field definitions describe the format of the rx indication
+ * message sent from the target to the host.
+ * The message consists of three major sections:
+ * 1.  a fixed-length header
+ * 2.  a variable-length list of firmware rx MSDU descriptors
+ * 3.  one or more 4-octet MPDU range information elements
+ * The fixed length header itself has two sub-sections
+ * 1.  the message meta-information, including identification of the
+ *     sender and type of the received data, and a 4-octet flush/release IE
+ * 2.  the firmware rx PPDU descriptor
+ *
+ * The format of the message is depicted below.
+ * in this depiction, the following abbreviations are used for information
+ * elements within the message:
+ *   - SV - start valid: this flag is set if the FW rx PPDU descriptor
+ *          elements associated with the PPDU start are valid.
+ *          Specifically, the following fields are valid only if SV is set:
+ *              RSSI (all variants), L, legacy rate, preamble type, service,
+ *              VHT-SIG-A
+ *   - EV - end valid: this flag is set if the FW rx PPDU descriptor
+ *          elements associated with the PPDU end are valid.
+ *          Specifically, the following fields are valid only if EV is set:
+ *              P, PHY err code, TSF, microsec / sub-microsec timestamp
+ *   - L  - Legacy rate selector - if legacy rates are used, this flag
+ *          indicates whether the rate is from a CCK (L == 1) or OFDM
+ *          (L == 0) PHY.
+ *   - P  - PHY error flag - boolean indication of whether the rx frame had
+ *          a PHY error
+ *
+ * |31            24|23         18|17|16|15|14|13|12|11|10|9|8|7|6|5|4       0|
+ * |----------------+-------------------+---------------------+---------------|
+ * |                  peer ID           |  |RV|FV| ext TID    |   msg type    |
+ * |--------------------------------------------------------------------------|
+ * |      num       |   release   |     release     |    flush    |   flush   |
+ * |      MPDU      |     end     |      start      |     end     |   start   |
+ * |     ranges     |   seq num   |     seq num     |   seq num   |  seq num  |
+ * |==========================================================================|
+ * |S|E|L| legacy |P|   PHY err code    |     sub-microsec    |    combined   |
+ * |V|V| |  rate  | |                   |       timestamp     |       RSSI    |
+ * |--------------------------------------------------------------------------|
+ * | RSSI rx0 ext80 |  RSSI rx0 ext40   |    RSSI rx0  ext20  | RSSI rx0 pri20|
+ * |--------------------------------------------------------------------------|
+ * | RSSI rx1 ext80 |  RSSI rx1 ext40   |    RSSI rx1  ext20  | RSSI rx1 pri20|
+ * |--------------------------------------------------------------------------|
+ * | RSSI rx2 ext80 |  RSSI rx2 ext40   |    RSSI rx2  ext20  | RSSI rx2 pri20|
+ * |--------------------------------------------------------------------------|
+ * | RSSI rx3 ext80 |  RSSI rx3 ext40   |    RSSI rx3  ext20  | RSSI rx3 pri20|
+ * |--------------------------------------------------------------------------|
+ * |                                  TSF LSBs                                |
+ * |--------------------------------------------------------------------------|
+ * |                             microsec timestamp                           |
+ * |--------------------------------------------------------------------------|
+ * | preamble type  |                    HT-SIG / VHT-SIG-A1                  |
+ * |--------------------------------------------------------------------------|
+ * |    service     |                    HT-SIG / VHT-SIG-A2                  |
+ * |==========================================================================|
+ * |             reserved               |          FW rx desc bytes           |
+ * |--------------------------------------------------------------------------|
+ * |     MSDU Rx    |      MSDU Rx      |        MSDU Rx      |    MSDU Rx    |
+ * |     desc B3    |      desc B2      |        desc B1      |    desc B0    |
+ * |--------------------------------------------------------------------------|
+ * :                                    :                                     :
+ * |--------------------------------------------------------------------------|
+ * |                          alignment                       |    MSDU Rx    |
+ * |                           padding                        |    desc Bn    |
+ * |--------------------------------------------------------------------------|
+ * |              reserved              |  MPDU range status  |   MPDU count  |
+ * |--------------------------------------------------------------------------|
+ * :              reserved              :  MPDU range status  :   MPDU count  :
+ * :- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - :
+ *
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as an rx indication message
+ *     Value: 0x1
+ *   - EXT_TID
+ *     Bits 12:8
+ *     Purpose: identify the traffic ID of the rx data, including
+ *         special "extended" TID values for multicast, broadcast, and
+ *         non-QoS data frames
+ *     Value: 0-15 for regular TIDs, or >= 16 for bcast/mcast/non-QoS
+ *   - FLUSH_VALID (FV)
+ *     Bit 13
+ *     Purpose: indicate whether the flush IE (start/end sequence numbers)
+ *         is valid
+ *     Value:
+ *         1 -> flush IE is valid and needs to be processed
+ *         0 -> flush IE is not valid and should be ignored
+ *   - REL_VALID (RV)
+ *     Bit 13
+ *     Purpose: indicate whether the release IE (start/end sequence numbers)
+ *         is valid
+ *     Value:
+ *         1 -> release IE is valid and needs to be processed
+ *         0 -> release IE is not valid and should be ignored
+ *   - PEER_ID
+ *     Bits 31:16
+ *     Purpose: Identify, by ID, which peer sent the rx data
+ *     Value: ID of the peer who sent the rx data
+ *   - FLUSH_SEQ_NUM_START
+ *     Bits 5:0
+ *     Purpose: Indicate the start of a series of MPDUs to flush
+ *         Not all MPDUs within this series are necessarily valid - the host
+ *         must check each sequence number within this range to see if the
+ *         corresponding MPDU is actually present.
+ *         This field is only valid if the FV bit is set.
+ *     Value:
+ *         The sequence number for the first MPDUs to check to flush.
+ *         The sequence number is masked by 0x3f.
+ *   - FLUSH_SEQ_NUM_END
+ *     Bits 11:6
+ *     Purpose: Indicate the end of a series of MPDUs to flush
+ *     Value:
+ *         The sequence number one larger than the sequence number of the
+ *         last MPDU to check to flush.
+ *         The sequence number is masked by 0x3f.
+ *         Not all MPDUs within this series are necessarily valid - the host
+ *         must check each sequence number within this range to see if the
+ *         corresponding MPDU is actually present.
+ *         This field is only valid if the FV bit is set.
+ *   - REL_SEQ_NUM_START
+ *     Bits 17:12
+ *     Purpose: Indicate the start of a series of MPDUs to release.
+ *         All MPDUs within this series are present and valid - the host
+ *         need not check each sequence number within this range to see if
+ *         the corresponding MPDU is actually present.
+ *         This field is only valid if the RV bit is set.
+ *     Value:
+ *         The sequence number for the first MPDUs to check to release.
+ *         The sequence number is masked by 0x3f.
+ *   - REL_SEQ_NUM_END
+ *     Bits 23:18
+ *     Purpose: Indicate the end of a series of MPDUs to release.
+ *     Value:
+ *         The sequence number one larger than the sequence number of the
+ *         last MPDU to check to release.
+ *         The sequence number is masked by 0x3f.
+ *         All MPDUs within this series are present and valid - the host
+ *         need not check each sequence number within this range to see if
+ *         the corresponding MPDU is actually present.
+ *         This field is only valid if the RV bit is set.
+ *   - NUM_MPDU_RANGES
+ *     Bits 31:24
+ *     Purpose: Indicate how many ranges of MPDUs are present.
+ *         Each MPDU range consists of a series of contiguous MPDUs within the
+ *         rx frame sequence which all have the same MPDU status.
+ *     Value: 1-63 (typically a small number, like 1-3)
+ *
+ * Rx PPDU descriptor fields:
+ *   - RSSI_CMB
+ *     Bits 7:0
+ *     Purpose: Combined RSSI from all active rx chains, across the active
+ *         bandwidth.
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - TIMESTAMP_SUBMICROSEC
+ *     Bits 15:8
+ *     Purpose: high-resolution timestamp
+ *     Value:
+ *         Sub-microsecond time of PPDU reception.
+ *         This timestamp ranges from [0,MAC clock MHz).
+ *         This timestamp can be used in conjunction with TIMESTAMP_MICROSEC
+ *         to form a high-resolution, large range rx timestamp.
+ *   - PHY_ERR_CODE
+ *     Bits 23:16
+ *     Purpose:
+ *         If the rx frame processing resulted in a PHY error, indicate what
+ *         type of rx PHY error occurred.
+ *     Value:
+ *         This field is valid if the "P" (PHY_ERR) flag is set.
+ *         TBD: document/specify the values for this field
+ *   - PHY_ERR
+ *     Bit 24
+ *     Purpose: indicate whether the rx PPDU had a PHY error
+ *     Value: 0 -> no rx PHY error, 1 -> rx PHY error encountered
+ *   - LEGACY_RATE
+ *     Bits 28:25
+ *     Purpose:
+ *         If the rx frame used a legacy rate rather than a HT or VHT rate,
+ *         specify which rate was used.
+ *     Value:
+ *         The LEGACY_RATE field's value depends on the "L" (LEGACY_RATE_SEL)
+ *         flag.
+ *         If LEGACY_RATE_SEL is 0:
+ *             0x8: OFDM 48 Mbps
+ *             0x9: OFDM 24 Mbps
+ *             0xA: OFDM 12 Mbps
+ *             0xB: OFDM 6 Mbps
+ *             0xC: OFDM 54 Mbps
+ *             0xD: OFDM 36 Mbps
+ *             0xE: OFDM 18 Mbps
+ *             0xF: OFDM 9 Mbps
+ *         If LEGACY_RATE_SEL is 1:
+ *             0x8: CCK 11 Mbps long preamble
+ *             0x9: CCK 5.5 Mbps long preamble
+ *             0xA: CCK 2 Mbps long preamble
+ *             0xB: CCK 1 Mbps long preamble
+ *             0xC: CCK 11 Mbps short preamble
+ *             0xD: CCK 5.5 Mbps short preamble
+ *             0xE: CCK 2 Mbps short preamble
+ *   - LEGACY_RATE_SEL
+ *     Bit 29
+ *     Purpose: if rx used a legacy rate, specify whether it was OFDM or CCK
+ *     Value:
+ *         This field is valid if the PREAMBLE_TYPE field indicates the rx
+ *         used a legacy rate.
+ *         0 -> OFDM, 1 -> CCK
+ *   - END_VALID
+ *     Bit 30
+ *     Purpose: Indicate whether the FW rx PPDU desc fields associated with
+ *         the start of the PPDU are valid.  Specifically, the following
+ *         fields are only valid if END_VALID is set:
+ *         PHY_ERR, PHY_ERR_CODE, TSF32, TIMESTAMP_MICROSEC,
+ *         TIMESTAMP_SUBMICROSEC
+ *     Value:
+ *         0 -> rx PPDU desc end fields are not valid
+ *         1 -> rx PPDU desc end fields are valid
+ *   - START_VALID
+ *     Bit 31
+ *     Purpose: Indicate whether the FW rx PPDU desc fields associated with
+ *         the end of the PPDU are valid.  Specifically, the following
+ *         fields are only valid if START_VALID is set:
+ *         RSSI, LEGACY_RATE_SEL, LEGACY_RATE, PREAMBLE_TYPE, SERVICE,
+ *         VHT-SIG-A
+ *     Value:
+ *         0 -> rx PPDU desc start fields are not valid
+ *         1 -> rx PPDU desc start fields are valid
+ *   - RSSI0_PRI20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 0 on the primary 20 MHz channel
+ *     Value: RSSI dB units w.r.t. noise floor
+ *
+ *   - RSSI0_EXT20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 0 on the bonded extension 20 MHz channel
+ *         (if the rx bandwidth was >= 40 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI0_EXT40
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 0 on the bonded extension 40 MHz channel
+ *         (if the rx bandwidth was >= 80 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI0_EXT80
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 0 on the bonded extension 80 MHz channel
+ *         (if the rx bandwidth was >= 160 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *
+ *   - RSSI1_PRI20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 1 on the primary 20 MHz channel
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI1_EXT20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 1 on the bonded extension 20 MHz channel
+ *         (if the rx bandwidth was >= 40 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI1_EXT40
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 1 on the bonded extension 40 MHz channel
+ *         (if the rx bandwidth was >= 80 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI1_EXT80
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 1 on the bonded extension 80 MHz channel
+ *         (if the rx bandwidth was >= 160 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *
+ *   - RSSI2_PRI20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 2 on the primary 20 MHz channel
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI2_EXT20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 2 on the bonded extension 20 MHz channel
+ *         (if the rx bandwidth was >= 40 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI2_EXT40
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 2 on the bonded extension 40 MHz channel
+ *         (if the rx bandwidth was >= 80 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI2_EXT80
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 2 on the bonded extension 80 MHz channel
+ *         (if the rx bandwidth was >= 160 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *
+ *   - RSSI3_PRI20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 3 on the primary 20 MHz channel
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI3_EXT20
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 3 on the bonded extension 20 MHz channel
+ *         (if the rx bandwidth was >= 40 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI3_EXT40
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 3 on the bonded extension 40 MHz channel
+ *         (if the rx bandwidth was >= 80 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *   - RSSI3_EXT80
+ *     Bits 7:0
+ *     Purpose: RSSI from chain 3 on the bonded extension 80 MHz channel
+ *         (if the rx bandwidth was >= 160 MHz)
+ *     Value: RSSI dB units w.r.t. noise floor
+ *
+ *   - TSF32
+ *     Bits 31:0
+ *     Purpose: specify the time the rx PPDU was received, in TSF units
+ *     Value: 32 LSBs of the TSF
+ *   - TIMESTAMP_MICROSEC
+ *     Bits 31:0
+ *     Purpose: specify the time the rx PPDU was received, in microsecond units
+ *     Value: PPDU rx time, in microseconds
+ *   - VHT_SIG_A1
+ *     Bits 23:0
+ *     Purpose: Provide the HT-SIG (initial 24 bits) or VHT-SIG-A1 field
+ *         from the rx PPDU
+ *     Value:
+ *         If PREAMBLE_TYPE specifies VHT, then this field contains the
+ *         VHT-SIG-A1 data.
+ *         If PREAMBLE_TYPE specifies HT, then this field contains the
+ *         first 24 bits of the HT-SIG data.
+ *         Otherwise, this field is invalid.
+ *         Refer to the the 802.11 protocol for the definition of the
+ *         HT-SIG and VHT-SIG-A1 fields
+ *   - VHT_SIG_A2
+ *     Bits 23:0
+ *     Purpose: Provide the HT-SIG (final 24 bits) or VHT-SIG-A2 field
+ *         from the rx PPDU
+ *     Value:
+ *         If PREAMBLE_TYPE specifies VHT, then this field contains the
+ *         VHT-SIG-A2 data.
+ *         If PREAMBLE_TYPE specifies HT, then this field contains the
+ *         last 24 bits of the HT-SIG data.
+ *         Otherwise, this field is invalid.
+ *         Refer to the the 802.11 protocol for the definition of the
+ *         HT-SIG and VHT-SIG-A2 fields
+ *   - PREAMBLE_TYPE
+ *     Bits 31:24
+ *     Purpose: indicate the PHY format of the received burst
+ *     Value:
+ *         0x4: Legacy (OFDM/CCK)
+ *         0x8: HT
+ *         0x9: HT with TxBF
+ *         0xC: VHT
+ *         0xD: VHT with TxBF
+ *   - SERVICE
+ *     Bits 31:24
+ *     Purpose: TBD
+ *     Value: TBD
+ *
+ * Rx MSDU descriptor fields:
+ *   - FW_RX_DESC_BYTES
+ *     Bits 15:0
+ *     Purpose: Indicate how many bytes in the Rx indication are used for
+ *         FW Rx descriptors
+ *
+ * Payload fields:
+ *   - MPDU_COUNT
+ *     Bits 7:0
+ *     Purpose: Indicate how many sequential MPDUs share the same status.
+ *         All MPDUs within the indicated list are from the same RA-TA-TID.
+ *   - MPDU_STATUS
+ *     Bits 15:8
+ *     Purpose: Indicate whether the (group of sequential) MPDU(s) were
+ *         received successfully.
+ *     Value:
+ *         0x1: success
+ *         0x2: FCS error
+ *         0x3: duplicate error
+ *         0x4: replay error
+ *         0x5: invalid peer
+ */
+/* header fields */
+#define HTT_RX_IND_EXT_TID_M      0x1f00
+#define HTT_RX_IND_EXT_TID_S      8
+#define HTT_RX_IND_FLUSH_VALID_M  0x2000
+#define HTT_RX_IND_FLUSH_VALID_S  13
+#define HTT_RX_IND_REL_VALID_M    0x4000
+#define HTT_RX_IND_REL_VALID_S    14
+#define HTT_RX_IND_PEER_ID_M      0xffff0000
+#define HTT_RX_IND_PEER_ID_S      16
+
+#define HTT_RX_IND_FLUSH_SEQ_NUM_START_M 0x3f
+#define HTT_RX_IND_FLUSH_SEQ_NUM_START_S 0
+#define HTT_RX_IND_FLUSH_SEQ_NUM_END_M   0xfc0
+#define HTT_RX_IND_FLUSH_SEQ_NUM_END_S   6
+#define HTT_RX_IND_REL_SEQ_NUM_START_M   0x3f000
+#define HTT_RX_IND_REL_SEQ_NUM_START_S   12
+#define HTT_RX_IND_REL_SEQ_NUM_END_M     0xfc0000
+#define HTT_RX_IND_REL_SEQ_NUM_END_S     18
+#define HTT_RX_IND_NUM_MPDU_RANGES_M     0xff000000
+#define HTT_RX_IND_NUM_MPDU_RANGES_S     24
+
+/* rx PPDU descriptor fields */
+#define HTT_RX_IND_RSSI_CMB_M              0x000000ff
+#define HTT_RX_IND_RSSI_CMB_S              0
+#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_M 0x0000ff00
+#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_S 8
+#define HTT_RX_IND_PHY_ERR_CODE_M          0x00ff0000
+#define HTT_RX_IND_PHY_ERR_CODE_S          16
+#define HTT_RX_IND_PHY_ERR_M               0x01000000
+#define HTT_RX_IND_PHY_ERR_S               24
+#define HTT_RX_IND_LEGACY_RATE_M           0x1e000000
+#define HTT_RX_IND_LEGACY_RATE_S           25
+#define HTT_RX_IND_LEGACY_RATE_SEL_M       0x20000000
+#define HTT_RX_IND_LEGACY_RATE_SEL_S       29
+#define HTT_RX_IND_END_VALID_M             0x40000000
+#define HTT_RX_IND_END_VALID_S             30
+#define HTT_RX_IND_START_VALID_M           0x80000000
+#define HTT_RX_IND_START_VALID_S           31
+
+#define HTT_RX_IND_RSSI_PRI20_M            0x000000ff
+#define HTT_RX_IND_RSSI_PRI20_S            0
+#define HTT_RX_IND_RSSI_EXT20_M            0x0000ff00
+#define HTT_RX_IND_RSSI_EXT20_S            8
+#define HTT_RX_IND_RSSI_EXT40_M            0x00ff0000
+#define HTT_RX_IND_RSSI_EXT40_S            16
+#define HTT_RX_IND_RSSI_EXT80_M            0xff000000
+#define HTT_RX_IND_RSSI_EXT80_S            24
+
+#define HTT_RX_IND_VHT_SIG_A1_M            0x00ffffff
+#define HTT_RX_IND_VHT_SIG_A1_S            0
+#define HTT_RX_IND_VHT_SIG_A2_M            0x00ffffff
+#define HTT_RX_IND_VHT_SIG_A2_S            0
+#define HTT_RX_IND_PREAMBLE_TYPE_M         0xff000000
+#define HTT_RX_IND_PREAMBLE_TYPE_S         24
+#define HTT_RX_IND_SERVICE_M               0xff000000
+#define HTT_RX_IND_SERVICE_S               24
+
+/* rx MSDU descriptor fields */
+#define HTT_RX_IND_FW_RX_DESC_BYTES_M   0xffff
+#define HTT_RX_IND_FW_RX_DESC_BYTES_S   0
+
+/* payload fields */
+#define HTT_RX_IND_MPDU_COUNT_M    0xff
+#define HTT_RX_IND_MPDU_COUNT_S    0
+#define HTT_RX_IND_MPDU_STATUS_M   0xff00
+#define HTT_RX_IND_MPDU_STATUS_S   8
+
+
+#define HTT_RX_IND_EXT_TID_SET(word, value)                              \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_EXT_TID, value);                    \
+        (word) |= (value)  << HTT_RX_IND_EXT_TID_S;                      \
+    } while (0)
+#define HTT_RX_IND_EXT_TID_GET(word) \
+    (((word) & HTT_RX_IND_EXT_TID_M) >> HTT_RX_IND_EXT_TID_S)
+
+#define HTT_RX_IND_FLUSH_VALID_SET(word, value)                          \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_FLUSH_VALID, value);                \
+        (word) |= (value)  << HTT_RX_IND_FLUSH_VALID_S;                  \
+    } while (0)
+#define HTT_RX_IND_FLUSH_VALID_GET(word) \
+    (((word) & HTT_RX_IND_FLUSH_VALID_M) >> HTT_RX_IND_FLUSH_VALID_S)
+
+#define HTT_RX_IND_REL_VALID_SET(word, value)                            \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_REL_VALID, value);                  \
+        (word) |= (value)  << HTT_RX_IND_REL_VALID_S;                    \
+    } while (0)
+#define HTT_RX_IND_REL_VALID_GET(word) \
+    (((word) & HTT_RX_IND_REL_VALID_M) >> HTT_RX_IND_REL_VALID_S)
+
+#define HTT_RX_IND_PEER_ID_SET(word, value)                              \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_PEER_ID, value);                    \
+        (word) |= (value)  << HTT_RX_IND_PEER_ID_S;                      \
+    } while (0)
+#define HTT_RX_IND_PEER_ID_GET(word) \
+    (((word) & HTT_RX_IND_PEER_ID_M) >> HTT_RX_IND_PEER_ID_S)
+
+
+#define HTT_RX_IND_FW_RX_DESC_BYTES_SET(word, value)                     \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_FW_RX_DESC_BYTES, value);           \
+        (word) |= (value)  << HTT_RX_IND_FW_RX_DESC_BYTES_S;             \
+    } while (0)
+#define HTT_RX_IND_FW_RX_DESC_BYTES_GET(word) \
+    (((word) & HTT_RX_IND_FW_RX_DESC_BYTES_M) >> HTT_RX_IND_FW_RX_DESC_BYTES_S)
+
+
+#define HTT_RX_IND_FLUSH_SEQ_NUM_START_SET(word, value)              \
+    do {                                                             \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_FLUSH_SEQ_NUM_START, value);    \
+        (word) |= (value)  << HTT_RX_IND_FLUSH_SEQ_NUM_START_S;      \
+    } while (0)
+#define HTT_RX_IND_FLUSH_SEQ_NUM_START_GET(word)                     \
+     (((word) & HTT_RX_IND_FLUSH_SEQ_NUM_START_M) >>                 \
+      HTT_RX_IND_FLUSH_SEQ_NUM_START_S)
+
+#define HTT_RX_IND_FLUSH_SEQ_NUM_END_SET(word, value)                \
+    do {                                                             \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_FLUSH_SEQ_NUM_END, value);      \
+        (word) |= (value)  << HTT_RX_IND_FLUSH_SEQ_NUM_END_S;        \
+    } while (0)
+#define HTT_RX_IND_FLUSH_SEQ_NUM_END_GET(word)                       \
+    (((word) & HTT_RX_IND_FLUSH_SEQ_NUM_END_M) >>                    \
+    HTT_RX_IND_FLUSH_SEQ_NUM_END_S)
+
+#define HTT_RX_IND_REL_SEQ_NUM_START_SET(word, value)                \
+    do {                                                             \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_REL_SEQ_NUM_START, value);      \
+        (word) |= (value)  << HTT_RX_IND_REL_SEQ_NUM_START_S;        \
+    } while (0)
+#define HTT_RX_IND_REL_SEQ_NUM_START_GET(word)                       \
+     (((word) & HTT_RX_IND_REL_SEQ_NUM_START_M) >>                   \
+      HTT_RX_IND_REL_SEQ_NUM_START_S)
+
+#define HTT_RX_IND_REL_SEQ_NUM_END_SET(word, value)                  \
+    do {                                                             \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_REL_SEQ_NUM_END, value);        \
+        (word) |= (value)  << HTT_RX_IND_REL_SEQ_NUM_END_S;          \
+    } while (0)
+#define HTT_RX_IND_REL_SEQ_NUM_END_GET(word)                         \
+    (((word) & HTT_RX_IND_REL_SEQ_NUM_END_M) >>                      \
+    HTT_RX_IND_REL_SEQ_NUM_END_S)
+
+#define HTT_RX_IND_NUM_MPDU_RANGES_SET(word, value)                  \
+    do {                                                             \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_NUM_MPDU_RANGES, value);        \
+        (word) |= (value)  << HTT_RX_IND_NUM_MPDU_RANGES_S;          \
+    } while (0)
+#define HTT_RX_IND_NUM_MPDU_RANGES_GET(word)                         \
+    (((word) & HTT_RX_IND_NUM_MPDU_RANGES_M) >>                      \
+    HTT_RX_IND_NUM_MPDU_RANGES_S)
+
+/* FW rx PPDU descriptor fields */
+#define HTT_RX_IND_RSSI_CMB_SET(word, value)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_CMB, value); \
+        (word) |= (value)  << HTT_RX_IND_RSSI_CMB_S;   \
+    } while (0)
+#define HTT_RX_IND_RSSI_CMB_GET(word)    \
+    (((word) & HTT_RX_IND_RSSI_CMB_M) >> \
+    HTT_RX_IND_RSSI_CMB_S)
+
+#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_SET(word, value)           \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_TIMESTAMP_SUBMICROSEC, value); \
+        (word) |= (value)  << HTT_RX_IND_TIMESTAMP_SUBMICROSEC_S;   \
+    } while (0)
+#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_GET(word)    \
+    (((word) & HTT_RX_IND_TIMESTAMP_SUBMICROSEC_M) >> \
+    HTT_RX_IND_TIMESTAMP_SUBMICROSEC_S)
+
+#define HTT_RX_IND_PHY_ERR_CODE_SET(word, value)           \
+    do {                                                        \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_PHY_ERR_CODE, value); \
+        (word) |= (value)  << HTT_RX_IND_PHY_ERR_CODE_S;   \
+    } while (0)
+#define HTT_RX_IND_PHY_ERR_CODE_GET(word)    \
+    (((word) & HTT_RX_IND_PHY_ERR_CODE_M) >> \
+    HTT_RX_IND_PHY_ERR_CODE_S)
+
+#define HTT_RX_IND_PHY_ERR_SET(word, value)           \
+    do {                                                   \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_PHY_ERR, value); \
+        (word) |= (value)  << HTT_RX_IND_PHY_ERR_S;   \
+    } while (0)
+#define HTT_RX_IND_PHY_ERR_GET(word)    \
+    (((word) & HTT_RX_IND_PHY_ERR_M) >> \
+    HTT_RX_IND_PHY_ERR_S)
+
+#define HTT_RX_IND_LEGACY_RATE_SET(word, value)           \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_LEGACY_RATE, value); \
+        (word) |= (value)  << HTT_RX_IND_LEGACY_RATE_S;   \
+    } while (0)
+#define HTT_RX_IND_LEGACY_RATE_GET(word)    \
+    (((word) & HTT_RX_IND_LEGACY_RATE_M) >> \
+    HTT_RX_IND_LEGACY_RATE_S)
+
+#define HTT_RX_IND_LEGACY_RATE_SEL_SET(word, value)           \
+    do {                                                           \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_LEGACY_RATE_SEL, value); \
+        (word) |= (value)  << HTT_RX_IND_LEGACY_RATE_SEL_S;   \
+    } while (0)
+#define HTT_RX_IND_LEGACY_RATE_SEL_GET(word)    \
+    (((word) & HTT_RX_IND_LEGACY_RATE_SEL_M) >> \
+    HTT_RX_IND_LEGACY_RATE_SEL_S)
+
+#define HTT_RX_IND_END_VALID_SET(word, value)           \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_END_VALID, value); \
+        (word) |= (value)  << HTT_RX_IND_END_VALID_S;   \
+    } while (0)
+#define HTT_RX_IND_END_VALID_GET(word)    \
+    (((word) & HTT_RX_IND_END_VALID_M) >> \
+    HTT_RX_IND_END_VALID_S)
+
+#define HTT_RX_IND_START_VALID_SET(word, value)           \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_START_VALID, value); \
+        (word) |= (value)  << HTT_RX_IND_START_VALID_S;   \
+    } while (0)
+#define HTT_RX_IND_START_VALID_GET(word)    \
+    (((word) & HTT_RX_IND_START_VALID_M) >> \
+    HTT_RX_IND_START_VALID_S)
+
+#define HTT_RX_IND_RSSI_PRI20_SET(word, value)           \
+    do {                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_PRI20, value); \
+        (word) |= (value)  << HTT_RX_IND_RSSI_PRI20_S;   \
+    } while (0)
+#define HTT_RX_IND_RSSI_PRI20_GET(word)    \
+    (((word) & HTT_RX_IND_RSSI_PRI20_M) >> \
+    HTT_RX_IND_RSSI_PRI20_S)
+
+#define HTT_RX_IND_RSSI_EXT20_SET(word, value)           \
+    do {                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_EXT20, value); \
+        (word) |= (value)  << HTT_RX_IND_RSSI_EXT20_S;   \
+    } while (0)
+#define HTT_RX_IND_RSSI_EXT20_GET(word)    \
+    (((word) & HTT_RX_IND_RSSI_EXT20_M) >> \
+    HTT_RX_IND_RSSI_EXT20_S)
+
+#define HTT_RX_IND_RSSI_EXT40_SET(word, value)           \
+    do {                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_EXT40, value); \
+        (word) |= (value)  << HTT_RX_IND_RSSI_EXT40_S;   \
+    } while (0)
+#define HTT_RX_IND_RSSI_EXT40_GET(word)    \
+    (((word) & HTT_RX_IND_RSSI_EXT40_M) >> \
+    HTT_RX_IND_RSSI_EXT40_S)
+
+#define HTT_RX_IND_RSSI_EXT80_SET(word, value)           \
+    do {                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_EXT80, value); \
+        (word) |= (value)  << HTT_RX_IND_RSSI_EXT80_S;   \
+    } while (0)
+#define HTT_RX_IND_RSSI_EXT80_GET(word)    \
+    (((word) & HTT_RX_IND_RSSI_EXT80_M) >> \
+    HTT_RX_IND_RSSI_EXT80_S)
+
+#define HTT_RX_IND_VHT_SIG_A1_SET(word, value)           \
+    do {                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_VHT_SIG_A1, value); \
+        (word) |= (value)  << HTT_RX_IND_VHT_SIG_A1_S;   \
+    } while (0)
+#define HTT_RX_IND_VHT_SIG_A1_GET(word)    \
+    (((word) & HTT_RX_IND_VHT_SIG_A1_M) >> \
+    HTT_RX_IND_VHT_SIG_A1_S)
+
+#define HTT_RX_IND_VHT_SIG_A2_SET(word, value)           \
+    do {                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_VHT_SIG_A2, value); \
+        (word) |= (value)  << HTT_RX_IND_VHT_SIG_A2_S;   \
+    } while (0)
+#define HTT_RX_IND_VHT_SIG_A2_GET(word)    \
+    (((word) & HTT_RX_IND_VHT_SIG_A2_M) >> \
+    HTT_RX_IND_VHT_SIG_A2_S)
+
+#define HTT_RX_IND_PREAMBLE_TYPE_SET(word, value)           \
+    do {                                                    \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_PREAMBLE_TYPE, value); \
+        (word) |= (value)  << HTT_RX_IND_PREAMBLE_TYPE_S;   \
+    } while (0)
+#define HTT_RX_IND_PREAMBLE_TYPE_GET(word)    \
+    (((word) & HTT_RX_IND_PREAMBLE_TYPE_M) >> \
+    HTT_RX_IND_PREAMBLE_TYPE_S)
+
+#define HTT_RX_IND_SERVICE_SET(word, value)           \
+    do {                                              \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_SERVICE, value); \
+        (word) |= (value)  << HTT_RX_IND_SERVICE_S;   \
+    } while (0)
+#define HTT_RX_IND_SERVICE_GET(word)    \
+    (((word) & HTT_RX_IND_SERVICE_M) >> \
+    HTT_RX_IND_SERVICE_S)
+
+
+#define HTT_RX_IND_MPDU_COUNT_SET(word, value)                          \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_MPDU_COUNT, value);                \
+        (word) |= (value)  << HTT_RX_IND_MPDU_COUNT_S;                  \
+    } while (0)
+#define HTT_RX_IND_MPDU_COUNT_GET(word) \
+    (((word) & HTT_RX_IND_MPDU_COUNT_M) >> HTT_RX_IND_MPDU_COUNT_S)
+
+#define HTT_RX_IND_MPDU_STATUS_SET(word, value)                         \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_IND_MPDU_STATUS, value);               \
+        (word) |= (value)  << HTT_RX_IND_MPDU_STATUS_S;                 \
+    } while (0)
+#define HTT_RX_IND_MPDU_STATUS_GET(word) \
+    (((word) & HTT_RX_IND_MPDU_STATUS_M) >> HTT_RX_IND_MPDU_STATUS_S)
+
+
+#define HTT_RX_IND_HL_BYTES                               \
+    (HTT_RX_IND_HDR_BYTES +                               \
+     4 /* single FW rx MSDU descriptor, plus padding */ + \
+     4 /* single MPDU range information element */)
+#define HTT_RX_IND_HL_SIZE32 (HTT_RX_IND_HL_BYTES >> 2)
+
+/* Could we use one macro entry? */
+#define HTT_WORD_SET(word, field, value) \
+    do { \
+        HTT_CHECK_SET_VAL(field, value); \
+        (word) |= ((value) << field ## _S); \
+    } while (0)
+#define HTT_WORD_GET(word, field) \
+    (((word) & field ## _M) >> field ## _S)
+
+PREPACK struct hl_htt_rx_ind_base {
+    A_UINT32 rx_ind_msg[HTT_RX_IND_HL_SIZE32];    /* align with LL case rx indication message, but reduced to 5 words */
+} POSTPACK;
+
+/*
+ * HTT_RX_IND_HL_RX_DESC_BASE_OFFSET
+ * Currently, we use a resv field in hl_htt_rx_ind_base to store some
+ * HL host needed info. The field is just after the msdu fw rx desc.
+ */
+#define HTT_RX_IND_HL_RX_DESC_BASE_OFFSET (HTT_RX_IND_FW_RX_DESC_BYTE_OFFSET + 1)
+struct htt_rx_ind_hl_rx_desc_t {
+    A_UINT8 ver;
+    A_UINT8 len;
+    struct {
+        A_UINT8
+            first_msdu: 1,
+            last_msdu: 1,
+            c3_failed: 1,
+            c4_failed: 1,
+            ipv6: 1,
+            tcp: 1,
+            udp: 1,
+            reserved: 1;
+    } flags;
+};
+
+#define HTT_RX_IND_HL_RX_DESC_VER_OFFSET \
+    (HTT_RX_IND_HL_RX_DESC_BASE_OFFSET \
+     + offsetof(struct htt_rx_ind_hl_rx_desc_t, ver))
+#define HTT_RX_IND_HL_RX_DESC_VER 0
+
+#define HTT_RX_IND_HL_RX_DESC_LEN_OFFSET \
+    (HTT_RX_IND_HL_RX_DESC_BASE_OFFSET \
+     + offsetof(struct htt_rx_ind_hl_rx_desc_t, len))
+
+#define HTT_RX_IND_HL_FLAG_OFFSET \
+    (HTT_RX_IND_HL_RX_DESC_BASE_OFFSET \
+     + offsetof(struct htt_rx_ind_hl_rx_desc_t, flags))
+
+#define HTT_RX_IND_HL_FLAG_FIRST_MSDU   (0x01 << 0)
+#define HTT_RX_IND_HL_FLAG_LAST_MSDU    (0x01 << 1)
+#define HTT_RX_IND_HL_FLAG_C3_FAILED    (0x01 << 2) /* L3 checksum failed */
+#define HTT_RX_IND_HL_FLAG_C4_FAILED    (0x01 << 3) /* L4 checksum failed */
+#define HTT_RX_IND_HL_FLAG_IPV6         (0x01 << 4) /* is ipv6, or else ipv4 */
+#define HTT_RX_IND_HL_FLAG_TCP          (0x01 << 5) /* is tcp */
+#define HTT_RX_IND_HL_FLAG_UDP          (0x01 << 6) /* is udp */
+/* This structure is used in HL, the basic descriptor information
+ * used by host. the structure is translated by FW from HW desc
+ * or generated by FW. But in HL monitor mode, the host would use
+ * the same structure with LL.
+ */
+PREPACK struct hl_htt_rx_desc_base {
+    A_UINT32
+        seq_num:12,
+        encrypted:1,
+        chan_info_present:1,
+        resv0:2,
+        mcast_bcast:1,
+        fragment:1,
+        key_id_oct:8,
+        resv1:6;
+    A_UINT32
+        pn_31_0;
+    union {
+        struct {
+            A_UINT16 pn_47_32;
+            A_UINT16 pn_63_48;
+        } pn16;
+        A_UINT32 pn_63_32;
+    } u0;
+    A_UINT32
+        pn_95_64;
+    A_UINT32
+        pn_127_96;
+} POSTPACK;
+
+
+/*
+ * Channel information can optionally be appended after hl_htt_rx_desc_base.
+ * If so, the len field in htt_rx_ind_hl_rx_desc_t will be updated accordingly,
+ * and the chan_info_present flag in hl_htt_rx_desc_base will be set.
+ * Please see htt_chan_change_t for description of the fields.
+ */
+PREPACK struct htt_chan_info_t
+{
+    A_UINT32    primary_chan_center_freq_mhz: 16,
+                contig_chan1_center_freq_mhz: 16;
+    A_UINT32    contig_chan2_center_freq_mhz: 16,
+                phy_mode: 8,
+                reserved: 8;
+} POSTPACK;
+
+#define HTT_CHAN_INFO_SIZE      sizeof(struct htt_chan_info_t)
+
+#define HL_RX_DESC_SIZE         (sizeof(struct hl_htt_rx_desc_base))
+#define HL_RX_DESC_SIZE_DWORD   (HL_RX_STD_DESC_SIZE >> 2)
+
+#define HTT_HL_RX_DESC_MPDU_SEQ_NUM_M       0xfff
+#define HTT_HL_RX_DESC_MPDU_SEQ_NUM_S       0
+#define HTT_HL_RX_DESC_MPDU_ENC_M           0x1000
+#define HTT_HL_RX_DESC_MPDU_ENC_S           12
+#define HTT_HL_RX_DESC_CHAN_INFO_PRESENT_M  0x2000
+#define HTT_HL_RX_DESC_CHAN_INFO_PRESENT_S  13
+#define HTT_HL_RX_DESC_MCAST_BCAST_M        0x10000
+#define HTT_HL_RX_DESC_MCAST_BCAST_S        16
+#define HTT_HL_RX_DESC_FRAGMENT_M           0x20000
+#define HTT_HL_RX_DESC_FRAGMENT_S           17
+#define HTT_HL_RX_DESC_KEY_ID_OCT_M         0x3fc0000
+#define HTT_HL_RX_DESC_KEY_ID_OCT_S         18
+
+#define HTT_HL_RX_DESC_PN_OFFSET            offsetof(struct hl_htt_rx_desc_base, pn_31_0)
+#define HTT_HL_RX_DESC_PN_WORD_OFFSET       (HTT_HL_RX_DESC_PN_OFFSET >> 2)
+
+
+/* Channel information */
+#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_M   0x0000ffff
+#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_S   0
+#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_M   0xffff0000
+#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_S   16
+#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_M   0x0000ffff
+#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_S   0
+#define HTT_CHAN_INFO_PHY_MODE_M                   0x00ff0000
+#define HTT_CHAN_INFO_PHY_MODE_S                   16
+
+
+#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_SET(word, value)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ, value);  \
+        (word) |= (value)  << HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_S;    \
+    } while (0)
+#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_GET(word)                   \
+    (((word) & HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_M) >> HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_S)
+
+
+#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_SET(word, value)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ, value);  \
+        (word) |= (value)  << HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_S;    \
+    } while (0)
+#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_GET(word)                   \
+    (((word) & HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_M) >> HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_S)
+
+
+#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_SET(word, value)            \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ, value);  \
+        (word) |= (value)  << HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_S;    \
+    } while (0)
+#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_GET(word)                   \
+    (((word) & HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_M) >> HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_S)
+
+
+#define HTT_CHAN_INFO_PHY_MODE_SET(word, value)            \
+    do {                                                \
+        HTT_CHECK_SET_VAL(HTT_CHAN_INFO_PHY_MODE, value);  \
+        (word) |= (value)  << HTT_CHAN_INFO_PHY_MODE_S;    \
+    } while (0)
+#define HTT_CHAN_INFO_PHY_MODE_GET(word)                   \
+    (((word) & HTT_CHAN_INFO_PHY_MODE_M) >> HTT_CHAN_INFO_PHY_MODE_S)
+
+
+/*
+ * @brief target -> host rx reorder flush message definition
+ *
+ * @details
+ * The following field definitions describe the format of the rx flush
+ * message sent from the target to the host.
+ * The message consists of a 4-octet header, followed by one or more
+ * 4-octet payload information elements.
+ *
+ *     |31           24|23                            8|7            0|
+ *     |--------------------------------------------------------------|
+ *     |       TID     |          peer ID              |   msg type   |
+ *     |--------------------------------------------------------------|
+ *     |  seq num end  | seq num start |  MPDU status  |   reserved   |
+ *     |--------------------------------------------------------------|
+ * First DWORD:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as an rx flush message
+ *     Value: 0x2
+ *   - PEER_ID
+ *     Bits 23:8 (only bits 18:8 actually used)
+ *     Purpose: identify which peer's rx data is being flushed
+ *     Value: (rx) peer ID
+ *   - TID
+ *     Bits 31:24 (only bits 27:24 actually used)
+ *     Purpose: Specifies which traffic identifier's rx data is being flushed
+ *     Value: traffic identifier
+ * Second DWORD:
+ *   - MPDU_STATUS
+ *     Bits 15:8
+ *     Purpose:
+ *         Indicate whether the flushed MPDUs should be discarded or processed.
+ *     Value:
+ *         0x1:   send the MPDUs from the rx reorder buffer to subsequent
+ *                stages of rx processing
+ *         other: discard the MPDUs
+ *         It is anticipated that flush messages will always have
+ *         MPDU status == 1, but the status flag is included for
+ *         flexibility.
+ *   - SEQ_NUM_START
+ *     Bits 23:16
+ *     Purpose:
+ *         Indicate the start of a series of consecutive MPDUs being flushed.
+ *         Not all MPDUs within this range are necessarily valid - the host
+ *         must check each sequence number within this range to see if the
+ *         corresponding MPDU is actually present.
+ *     Value:
+ *         The sequence number for the first MPDU in the sequence.
+ *         This sequence number is the 6 LSBs of the 802.11 sequence number.
+ *   - SEQ_NUM_END
+ *     Bits 30:24
+ *     Purpose:
+ *         Indicate the end of a series of consecutive MPDUs being flushed.
+ *     Value:
+ *         The sequence number one larger than the sequence number of the
+ *         last MPDU being flushed.
+ *         This sequence number is the 6 LSBs of the 802.11 sequence number.
+ *         The range of MPDUs from [SEQ_NUM_START,SEQ_NUM_END-1] inclusive
+ *         are to be released for further rx processing.
+ *         Not all MPDUs within this range are necessarily valid - the host
+ *         must check each sequence number within this range to see if the
+ *         corresponding MPDU is actually present.
+ */
+/* first DWORD */
+#define HTT_RX_FLUSH_PEER_ID_M  0xffff00
+#define HTT_RX_FLUSH_PEER_ID_S  8
+#define HTT_RX_FLUSH_TID_M      0xff000000
+#define HTT_RX_FLUSH_TID_S      24
+/* second DWORD */
+#define HTT_RX_FLUSH_MPDU_STATUS_M   0x0000ff00
+#define HTT_RX_FLUSH_MPDU_STATUS_S   8
+#define HTT_RX_FLUSH_SEQ_NUM_START_M 0x00ff0000
+#define HTT_RX_FLUSH_SEQ_NUM_START_S 16
+#define HTT_RX_FLUSH_SEQ_NUM_END_M   0xff000000
+#define HTT_RX_FLUSH_SEQ_NUM_END_S   24
+
+#define HTT_RX_FLUSH_BYTES 8
+
+#define HTT_RX_FLUSH_PEER_ID_SET(word, value)                           \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_FLUSH_PEER_ID, value);                 \
+        (word) |= (value)  << HTT_RX_FLUSH_PEER_ID_S;                   \
+    } while (0)
+#define HTT_RX_FLUSH_PEER_ID_GET(word) \
+    (((word) & HTT_RX_FLUSH_PEER_ID_M) >> HTT_RX_FLUSH_PEER_ID_S)
+
+#define HTT_RX_FLUSH_TID_SET(word, value)                               \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_FLUSH_TID, value);                     \
+        (word) |= (value)  << HTT_RX_FLUSH_TID_S;                       \
+    } while (0)
+#define HTT_RX_FLUSH_TID_GET(word) \
+    (((word) & HTT_RX_FLUSH_TID_M) >> HTT_RX_FLUSH_TID_S)
+
+#define HTT_RX_FLUSH_MPDU_STATUS_SET(word, value)                       \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_FLUSH_MPDU_STATUS, value);             \
+        (word) |= (value)  << HTT_RX_FLUSH_MPDU_STATUS_S;               \
+    } while (0)
+#define HTT_RX_FLUSH_MPDU_STATUS_GET(word) \
+    (((word) & HTT_RX_FLUSH_MPDU_STATUS_M) >> HTT_RX_FLUSH_MPDU_STATUS_S)
+
+#define HTT_RX_FLUSH_SEQ_NUM_START_SET(word, value)                     \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_FLUSH_SEQ_NUM_START, value);           \
+        (word) |= (value)  << HTT_RX_FLUSH_SEQ_NUM_START_S;             \
+    } while (0)
+#define HTT_RX_FLUSH_SEQ_NUM_START_GET(word) \
+    (((word) & HTT_RX_FLUSH_SEQ_NUM_START_M) >> HTT_RX_FLUSH_SEQ_NUM_START_S)
+
+#define HTT_RX_FLUSH_SEQ_NUM_END_SET(word, value)                       \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_FLUSH_SEQ_NUM_END, value);             \
+        (word) |= (value)  << HTT_RX_FLUSH_SEQ_NUM_END_S;               \
+    } while (0)
+#define HTT_RX_FLUSH_SEQ_NUM_END_GET(word) \
+    (((word) & HTT_RX_FLUSH_SEQ_NUM_END_M) >> HTT_RX_FLUSH_SEQ_NUM_END_S)
+
+/*
+ * @brief target -> host rx pn check indication message
+ *
+ * @details
+ * The following field definitions describe the format of the Rx PN check
+ * indication message sent from the target to the host.
+ * The message consists of a 4-octet header, followed by the start and
+ * end sequence numbers to be released, followed by the PN IEs. Each PN
+ * IE is one octet containing the sequence number that failed the PN
+ * check.
+ *
+ *     |31           24|23                            8|7            0|
+ *     |--------------------------------------------------------------|
+ *     |       TID     |          peer ID              |   msg type   |
+ *     |--------------------------------------------------------------|
+ *     |  Reserved     | PN IE count   | seq num end   | seq num start|
+ *     |--------------------------------------------------------------|
+ *     l               :    PN IE 2    |    PN IE 1    |   PN IE 0    |
+ *     |--------------------------------------------------------------|
+
+ * First DWORD:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: Identifies this as an rx pn check indication message
+ *     Value: 0x2
+ *   - PEER_ID
+ *     Bits 23:8 (only bits 18:8 actually used)
+ *     Purpose: identify which peer
+ *     Value: (rx) peer ID
+ *   - TID
+ *     Bits 31:24 (only bits 27:24 actually used)
+ *     Purpose: identify traffic identifier
+ *     Value: traffic identifier
+ * Second DWORD:
+ *   - SEQ_NUM_START
+ *     Bits 7:0
+ *     Purpose:
+ *        Indicates the starting sequence number of the MPDU in this
+ *        series of MPDUs that went though PN check.
+ *     Value:
+ *        The sequence number for the first MPDU in the sequence.
+ *        This sequence number is the 6 LSBs of the 802.11 sequence number.
+ *   - SEQ_NUM_END
+ *     Bits 15:8
+ *     Purpose:
+ *        Indicates the ending sequence number of the MPDU in this
+ *        series of MPDUs that went though PN check.
+ *     Value:
+ *        The sequence number one larger then the sequence number of the last
+ *        MPDU being flushed.
+ *        This sequence number is the 6 LSBs of the 802.11 sequence number.
+ *        The range of MPDUs from [SEQ_NUM_START,SEQ_NUM_END-1] have been checked
+ *        for invalid PN numbers and are ready to be released for further processing.
+ *        Not all MPDUs within this range are necessarily valid - the host
+ *        must check each sequence number within this range to see if the
+ *        corresponding MPDU is actually present.
+ *   - PN_IE_COUNT
+ *     Bits 23:16
+ *     Purpose:
+ *        Used to determine the variable number of PN information elements in this
+ *        message
+ *
+ * PN information elements:
+ *  - PN_IE_x-
+ *      Purpose:
+ *          Each PN information element contains the sequence number of the MPDU that
+ *          has failed the target PN check.
+ *      Value:
+ *          Contains the 6 LSBs of the 802.11 sequence number corresponding to the MPDU
+ *          that failed the PN check.
+ */
+/* first DWORD */
+#define HTT_RX_PN_IND_PEER_ID_M  0xffff00
+#define HTT_RX_PN_IND_PEER_ID_S  8
+#define HTT_RX_PN_IND_TID_M      0xff000000
+#define HTT_RX_PN_IND_TID_S      24
+/* second DWORD */
+#define HTT_RX_PN_IND_SEQ_NUM_START_M 0x000000ff
+#define HTT_RX_PN_IND_SEQ_NUM_START_S 0
+#define HTT_RX_PN_IND_SEQ_NUM_END_M   0x0000ff00
+#define HTT_RX_PN_IND_SEQ_NUM_END_S   8
+#define HTT_RX_PN_IND_PN_IE_CNT_M     0x00ff0000
+#define HTT_RX_PN_IND_PN_IE_CNT_S     16
+
+#define HTT_RX_PN_IND_BYTES 8
+
+#define HTT_RX_PN_IND_PEER_ID_SET(word, value)                           \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_PN_IND_PEER_ID, value);                 \
+        (word) |= (value)  << HTT_RX_PN_IND_PEER_ID_S;                   \
+    } while (0)
+#define HTT_RX_PN_IND_PEER_ID_GET(word) \
+    (((word) & HTT_RX_PN_IND_PEER_ID_M) >> HTT_RX_PN_IND_PEER_ID_S)
+
+#define HTT_RX_PN_IND_EXT_TID_SET(word, value)                               \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_PN_IND_TID, value);                     \
+        (word) |= (value)  << HTT_RX_PN_IND_TID_S;                       \
+    } while (0)
+#define HTT_RX_PN_IND_EXT_TID_GET(word) \
+    (((word) & HTT_RX_PN_IND_TID_M) >> HTT_RX_PN_IND_TID_S)
+
+#define HTT_RX_PN_IND_SEQ_NUM_START_SET(word, value)                     \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_PN_IND_SEQ_NUM_START, value);           \
+        (word) |= (value)  << HTT_RX_PN_IND_SEQ_NUM_START_S;             \
+    } while (0)
+#define HTT_RX_PN_IND_SEQ_NUM_START_GET(word) \
+    (((word) & HTT_RX_PN_IND_SEQ_NUM_START_M) >> HTT_RX_PN_IND_SEQ_NUM_START_S)
+
+#define HTT_RX_PN_IND_SEQ_NUM_END_SET(word, value)                       \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_PN_IND_SEQ_NUM_END, value);             \
+        (word) |= (value)  << HTT_RX_PN_IND_SEQ_NUM_END_S;               \
+    } while (0)
+#define HTT_RX_PN_IND_SEQ_NUM_END_GET(word) \
+    (((word) & HTT_RX_PN_IND_SEQ_NUM_END_M) >> HTT_RX_PN_IND_SEQ_NUM_END_S)
+
+#define HTT_RX_PN_IND_PN_IE_CNT_SET(word, value)                         \
+    do {                                                                 \
+        HTT_CHECK_SET_VAL(HTT_RX_PN_IND_PN_IE_CNT, value);               \
+        (word) |= (value) << HTT_RX_PN_IND_PN_IE_CNT_S;                  \
+    } while (0)
+#define HTT_RX_PN_IND_PN_IE_CNT_GET(word)   \
+    (((word) & HTT_RX_PN_IND_PN_IE_CNT_M) >> HTT_RX_PN_IND_PN_IE_CNT_S)
+
+/*
+ * @brief target -> host rx offload deliver message for LL system
+ *
+ * @details
+ * In a low latency system this message is sent whenever the offload
+ * manager flushes out the packets it has coalesced in its coalescing buffer.
+ * The DMA of the actual packets into host memory is done before sending out
+ * this message. This message indicates only how many MSDUs to reap. The
+ * peer ID, vdev ID, tid and MSDU length are copied inline into the header
+ * portion of the MSDU while DMA'ing into the host memory. Unlike the packets
+ * DMA'd by the MAC directly into host memory these packets do not contain
+ * the MAC descriptors in the header portion of the packet. Instead they contain
+ * the peer ID, vdev ID, tid and MSDU length. Also when the host receives this
+ * message, the packets are delivered directly to the NW stack without going
+ * through the regular reorder buffering and PN checking path since it has
+ * already been done in target.
+ *
+ * |31             24|23             16|15              8|7               0|
+ * |-----------------------------------------------------------------------|
+ * |         Total MSDU count          |     reserved    |     msg type    |
+ * |-----------------------------------------------------------------------|
+ *
+ * @brief target -> host rx offload deliver message for HL system
+ *
+ * @details
+ * In a high latency system this message is sent whenever the offload manager
+ * flushes out the packets it has coalesced in its coalescing buffer. The
+ * actual packets are also carried along with this message. When the host
+ * receives this message, it is expected to deliver these packets to the NW
+ * stack directly instead of routing them through the reorder buffering and
+ * PN checking path since it has already been done in target.
+ *
+ * |31             24|23             16|15              8|7               0|
+ * |-----------------------------------------------------------------------|
+ * |         Total MSDU count          |    reserved     |     msg type    |
+ * |-----------------------------------------------------------------------|
+ * |            peer ID                |              MSDU length          |
+ * |-----------------------------------------------------------------------|
+ * |  MSDU payload   |     FW Desc     |       tid       |   vdev ID       |
+ * |-----------------------------------------------------------------------|
+ * |                           MSDU payload contd.                         |
+ * |-----------------------------------------------------------------------|
+ * |            peer ID                |              MSDU length          |
+ * |-----------------------------------------------------------------------|
+ * |  MSDU payload   |    FW Desc      |       tid       |   vdev ID       |
+ * |-----------------------------------------------------------------------|
+ * |                           MSDU payload contd.                         |
+ * |-----------------------------------------------------------------------|
+ *
+ */
+/* first DWORD */
+#define HTT_RX_OFFLOAD_DELIVER_IND_HDR_BYTES          4
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_HDR_BYTES     7
+
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_M         0xffff0000
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_S         16
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_M         0x0000ffff
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_S         0
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_M     0xffff0000
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_S     16
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_M     0x000000ff
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_S     0
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_M         0x0000ff00
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_S         8
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_M        0x00ff0000
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_S        16
+
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_GET(word) \
+    (((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_S)
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_SET(word, value) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT, value); \
+        (word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_S; \
+    } while (0)
+
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_GET(word) \
+    (((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_S)
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_SET(word, value) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN, value); \
+        (word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_S; \
+    } while (0)
+
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_GET(word) \
+    (((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_S)
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_SET(word, value) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID, value); \
+        (word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_S; \
+    } while (0)
+
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_GET(word) \
+    (((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_S)
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_SET(word, value) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID, value); \
+        (word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_S; \
+    } while (0)
+
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_GET(word) \
+    (((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_S)
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_SET(word, value) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID, value); \
+        (word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_S; \
+    } while (0)
+
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_GET(word) \
+    (((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_S)
+#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_SET(word, value) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC, value); \
+        (word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_S; \
+    } while (0)
+
+/**
+ * @brief target -> host rx peer map/unmap message definition
+ *
+ * @details
+ * The following diagram shows the format of the rx peer map message sent
+ * from the target to the host.  This layout assumes the target operates
+ * as little-endian.
+ *
+ * |31             24|23             16|15              8|7               0|
+ * |-----------------------------------------------------------------------|
+ * |              peer ID              |     VDEV ID     |     msg type    |
+ * |-----------------------------------------------------------------------|
+ * |    MAC addr 3   |    MAC addr 2   |    MAC addr 1   |    MAC addr 0   |
+ * |-----------------------------------------------------------------------|
+ * |              reserved             |    MAC addr 5   |    MAC addr 4   |
+ * |-----------------------------------------------------------------------|
+ *
+ *
+ * The following diagram shows the format of the rx peer unmap message sent
+ * from the target to the host.
+ *
+ * |31             24|23             16|15              8|7               0|
+ * |-----------------------------------------------------------------------|
+ * |              peer ID              |     VDEV ID     |     msg type    |
+ * |-----------------------------------------------------------------------|
+ *
+ * The following field definitions describe the format of the rx peer map
+ * and peer unmap messages sent from the target to the host.
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as an rx peer map or peer unmap message
+ *     Value: peer map -> 0x3, peer unmap -> 0x4
+ *   - VDEV_ID
+ *     Bits 15:8
+ *     Purpose: Indicates which virtual device the peer is associated
+ *         with.
+ *     Value: vdev ID (used in the host to look up the vdev object)
+ *   - PEER_ID
+ *     Bits 31:16
+ *     Purpose: The peer ID (index) that WAL is allocating (map) or
+ *         freeing (unmap)
+ *     Value: (rx) peer ID
+ *   - MAC_ADDR_L32 (peer map only)
+ *     Bits 31:0
+ *     Purpose: Identifies which peer node the peer ID is for.
+ *     Value: lower 4 bytes of peer node's MAC address
+ *   - MAC_ADDR_U16 (peer map only)
+ *     Bits 15:0
+ *     Purpose: Identifies which peer node the peer ID is for.
+ *     Value: upper 2 bytes of peer node's MAC address
+ */
+#define HTT_RX_PEER_MAP_VDEV_ID_M       0xff00
+#define HTT_RX_PEER_MAP_VDEV_ID_S       8
+#define HTT_RX_PEER_MAP_PEER_ID_M      0xffff0000
+#define HTT_RX_PEER_MAP_PEER_ID_S      16
+#define HTT_RX_PEER_MAP_MAC_ADDR_L32_M 0xffffffff
+#define HTT_RX_PEER_MAP_MAC_ADDR_L32_S 0
+#define HTT_RX_PEER_MAP_MAC_ADDR_U16_M 0xffff
+#define HTT_RX_PEER_MAP_MAC_ADDR_U16_S 0
+
+#define HTT_RX_PEER_MAP_VAP_ID_SET HTT_RX_PEER_MAP_VDEV_ID_SET /* deprecated */
+#define HTT_RX_PEER_MAP_VDEV_ID_SET(word, value)                         \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_VDEV_ID, value);               \
+        (word) |= (value)  << HTT_RX_PEER_MAP_VDEV_ID_S;                 \
+    } while (0)
+#define HTT_RX_PEER_MAP_VAP_ID_GET HTT_RX_PEER_MAP_VDEV_ID_GET /* deprecated */
+#define HTT_RX_PEER_MAP_VDEV_ID_GET(word) \
+    (((word) & HTT_RX_PEER_MAP_VDEV_ID_M) >> HTT_RX_PEER_MAP_VDEV_ID_S)
+
+#define HTT_RX_PEER_MAP_PEER_ID_SET(word, value)                        \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_PEER_ID, value);              \
+        (word) |= (value)  << HTT_RX_PEER_MAP_PEER_ID_S;                \
+    } while (0)
+#define HTT_RX_PEER_MAP_PEER_ID_GET(word) \
+    (((word) & HTT_RX_PEER_MAP_PEER_ID_M) >> HTT_RX_PEER_MAP_PEER_ID_S)
+
+#define HTT_RX_PEER_MAP_MAC_ADDR_OFFSET 4 /* bytes */
+
+#define HTT_RX_PEER_MAP_BYTES 12
+
+
+#define HTT_RX_PEER_UNMAP_PEER_ID_M   HTT_RX_PEER_MAP_PEER_ID_M
+#define HTT_RX_PEER_UNMAP_PEER_ID_S   HTT_RX_PEER_MAP_PEER_ID_S
+
+#define HTT_RX_PEER_UNMAP_PEER_ID_SET HTT_RX_PEER_MAP_PEER_ID_SET
+#define HTT_RX_PEER_UNMAP_PEER_ID_GET HTT_RX_PEER_MAP_PEER_ID_GET
+
+#define HTT_RX_PEER_UNMAP_VDEV_ID_SET HTT_RX_PEER_MAP_VDEV_ID_SET
+#define HTT_RX_PEER_UNMAP_VDEV_ID_GET HTT_RX_PEER_MAP_VDEV_ID_GET
+
+#define HTT_RX_PEER_UNMAP_BYTES 4
+
+
+/**
+ * @brief target -> host message specifying security parameters
+ *
+ * @details
+ *  The following diagram shows the format of the security specification
+ *  message sent from the target to the host.
+ *  This security specification message tells the host whether a PN check is
+ *  necessary on rx data frames, and if so, how large the PN counter is.
+ *  This message also tells the host about the security processing to apply
+ *  to defragmented rx frames - specifically, whether a Message Integrity
+ *  Check is required, and the Michael key to use.
+ *
+ * |31             24|23          16|15|14              8|7               0|
+ * |-----------------------------------------------------------------------|
+ * |              peer ID           | U|  security type  |     msg type    |
+ * |-----------------------------------------------------------------------|
+ * |                           Michael Key K0                              |
+ * |-----------------------------------------------------------------------|
+ * |                           Michael Key K1                              |
+ * |-----------------------------------------------------------------------|
+ * |                           WAPI RSC Low0                               |
+ * |-----------------------------------------------------------------------|
+ * |                           WAPI RSC Low1                               |
+ * |-----------------------------------------------------------------------|
+ * |                           WAPI RSC Hi0                                |
+ * |-----------------------------------------------------------------------|
+ * |                           WAPI RSC Hi1                                |
+ * |-----------------------------------------------------------------------|
+ *
+ * The following field definitions describe the format of the security
+ * indication message sent from the target to the host.
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a security specification message
+ *     Value: 0xb
+ *   - SEC_TYPE
+ *     Bits 14:8
+ *     Purpose: specifies which type of security applies to the peer
+ *     Value: htt_sec_type enum value
+ *   - UNICAST
+ *     Bit 15
+ *     Purpose: whether this security is applied to unicast or multicast data
+ *     Value: 1 -> unicast, 0 -> multicast
+ *   - PEER_ID
+ *     Bits 31:16
+ *     Purpose: The ID number for the peer the security specification is for
+ *     Value: peer ID
+ *   - MICHAEL_KEY_K0
+ *     Bits 31:0
+ *     Purpose: 4-byte word that forms the 1st half of the TKIP Michael key
+ *     Value: Michael Key K0 (if security type is TKIP)
+ *   - MICHAEL_KEY_K1
+ *     Bits 31:0
+ *     Purpose: 4-byte word that forms the 2nd half of the TKIP Michael key
+ *     Value: Michael Key K1 (if security type is TKIP)
+ *   - WAPI_RSC_LOW0
+ *     Bits 31:0
+ *     Purpose: 4-byte word that forms the 1st quarter of the 16 byte WAPI RSC
+ *     Value: WAPI RSC Low0 (if security type is WAPI)
+ *   - WAPI_RSC_LOW1
+ *     Bits 31:0
+ *     Purpose: 4-byte word that forms the 2nd quarter of the 16 byte WAPI RSC
+ *     Value: WAPI RSC Low1 (if security type is WAPI)
+ *   - WAPI_RSC_HI0
+ *     Bits 31:0
+ *     Purpose: 4-byte word that forms the 3rd quarter of the 16 byte WAPI RSC
+ *     Value: WAPI RSC Hi0 (if security type is WAPI)
+ *   - WAPI_RSC_HI1
+ *     Bits 31:0
+ *     Purpose: 4-byte word that forms the 4th quarter of the 16 byte WAPI RSC
+ *     Value: WAPI RSC Hi1 (if security type is WAPI)
+ */
+
+#define HTT_SEC_IND_SEC_TYPE_M     0x00007f00
+#define HTT_SEC_IND_SEC_TYPE_S     8
+#define HTT_SEC_IND_UNICAST_M      0x00008000
+#define HTT_SEC_IND_UNICAST_S      15
+#define HTT_SEC_IND_PEER_ID_M      0xffff0000
+#define HTT_SEC_IND_PEER_ID_S      16
+
+#define HTT_SEC_IND_SEC_TYPE_SET(word, value)                       \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_SEC_IND_SEC_TYPE, value);             \
+        (word) |= (value)  << HTT_SEC_IND_SEC_TYPE_S;               \
+    } while (0)
+#define HTT_SEC_IND_SEC_TYPE_GET(word) \
+    (((word) & HTT_SEC_IND_SEC_TYPE_M) >> HTT_SEC_IND_SEC_TYPE_S)
+
+#define HTT_SEC_IND_UNICAST_SET(word, value)                        \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_SEC_IND_UNICAST, value);              \
+        (word) |= (value)  << HTT_SEC_IND_UNICAST_S;                \
+    } while (0)
+#define HTT_SEC_IND_UNICAST_GET(word) \
+    (((word) & HTT_SEC_IND_UNICAST_M) >> HTT_SEC_IND_UNICAST_S)
+
+#define HTT_SEC_IND_PEER_ID_SET(word, value)                        \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_SEC_IND_PEER_ID, value);              \
+        (word) |= (value)  << HTT_SEC_IND_PEER_ID_S;                \
+    } while (0)
+#define HTT_SEC_IND_PEER_ID_GET(word) \
+    (((word) & HTT_SEC_IND_PEER_ID_M) >> HTT_SEC_IND_PEER_ID_S)
+
+
+#define HTT_SEC_IND_BYTES 28
+
+
+/**
+ * @brief target -> host rx ADDBA / DELBA message definitions
+ *
+ * @details
+ * The following diagram shows the format of the rx ADDBA message sent
+ * from the target to the host:
+ *
+ * |31                      20|19  16|15              8|7               0|
+ * |---------------------------------------------------------------------|
+ * |          peer ID         |  TID |   window size   |     msg type    |
+ * |---------------------------------------------------------------------|
+ *
+ * The following diagram shows the format of the rx DELBA message sent
+ * from the target to the host:
+ *
+ * |31                      20|19  16|15              8|7               0|
+ * |---------------------------------------------------------------------|
+ * |          peer ID         |  TID |     reserved    |     msg type    |
+ * |---------------------------------------------------------------------|
+ *
+ * The following field definitions describe the format of the rx ADDBA
+ * and DELBA messages sent from the target to the host.
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as an rx ADDBA or DELBA message
+ *     Value: ADDBA -> 0x5, DELBA -> 0x6
+ *   - WIN_SIZE
+ *     Bits 15:8 (ADDBA only)
+ *     Purpose: Specifies the length of the block ack window (max = 64).
+ *     Value:
+ *         block ack window length specified by the received ADDBA
+ *         management message.
+ *   - TID
+ *     Bits 19:16
+ *     Purpose: Specifies which traffic identifier the ADDBA / DELBA is for.
+ *     Value:
+ *         TID specified by the received ADDBA or DELBA management message.
+ *   - PEER_ID
+ *     Bits 31:20
+ *     Purpose: Identifies which peer sent the ADDBA / DELBA.
+ *     Value:
+ *         ID (hash value) used by the host for fast,  direct lookup of
+ *         host SW peer info, including rx reorder states.
+ */
+#define HTT_RX_ADDBA_WIN_SIZE_M  0xff00
+#define HTT_RX_ADDBA_WIN_SIZE_S  8
+#define HTT_RX_ADDBA_TID_M       0xf0000
+#define HTT_RX_ADDBA_TID_S       16
+#define HTT_RX_ADDBA_PEER_ID_M   0xfff00000
+#define HTT_RX_ADDBA_PEER_ID_S   20
+
+#define HTT_RX_ADDBA_WIN_SIZE_SET(word, value)                          \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_ADDBA_WIN_SIZE, value);                \
+        (word) |= (value)  << HTT_RX_ADDBA_WIN_SIZE_S;                  \
+    } while (0)
+#define HTT_RX_ADDBA_WIN_SIZE_GET(word) \
+    (((word) & HTT_RX_ADDBA_WIN_SIZE_M) >> HTT_RX_ADDBA_WIN_SIZE_S)
+
+#define HTT_RX_ADDBA_TID_SET(word, value)                               \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_ADDBA_TID, value);                     \
+        (word) |= (value)  << HTT_RX_ADDBA_TID_S;                       \
+    } while (0)
+#define HTT_RX_ADDBA_TID_GET(word) \
+    (((word) & HTT_RX_ADDBA_TID_M) >> HTT_RX_ADDBA_TID_S)
+
+#define HTT_RX_ADDBA_PEER_ID_SET(word, value)                           \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_ADDBA_PEER_ID, value);                 \
+        (word) |= (value)  << HTT_RX_ADDBA_PEER_ID_S;                   \
+    } while (0)
+#define HTT_RX_ADDBA_PEER_ID_GET(word) \
+    (((word) & HTT_RX_ADDBA_PEER_ID_M) >> HTT_RX_ADDBA_PEER_ID_S)
+
+#define HTT_RX_ADDBA_BYTES 4
+
+
+#define HTT_RX_DELBA_TID_M         HTT_RX_ADDBA_TID_M
+#define HTT_RX_DELBA_TID_S         HTT_RX_ADDBA_TID_S
+#define HTT_RX_DELBA_PEER_ID_M     HTT_RX_ADDBA_PEER_ID_M
+#define HTT_RX_DELBA_PEER_ID_S     HTT_RX_ADDBA_PEER_ID_S
+
+#define HTT_RX_DELBA_TID_SET       HTT_RX_ADDBA_TID_SET
+#define HTT_RX_DELBA_TID_GET       HTT_RX_ADDBA_TID_GET
+#define HTT_RX_DELBA_PEER_ID_SET   HTT_RX_ADDBA_PEER_ID_SET
+#define HTT_RX_DELBA_PEER_ID_GET   HTT_RX_ADDBA_PEER_ID_GET
+
+#define HTT_RX_DELBA_BYTES 4
+
+/**
+ * @brief tx queue group information element definition
+ *
+ * @details
+ * The following diagram shows the format of the tx queue group
+ * information element, which can be included in target --> host
+ * messages to specify the number of tx "credits" (tx descriptors
+ * for LL, or tx buffers for HL) available to a particular group
+ * of host-side tx queues, and which host-side tx queues belong to
+ * the group.
+ *
+ * |31|30          24|23             16|15|14|13                           0|
+ * |------------------------------------------------------------------------|
+ * | X|   reserved   | tx queue grp ID | A| S|     credit count             |
+ * |------------------------------------------------------------------------|
+ * |            vdev ID mask           |               AC mask              |
+ * |------------------------------------------------------------------------|
+ *
+ * The following definitions describe the fields within the tx queue group
+ * information element:
+ * - credit_count
+ *   Bits 13:1
+ *   Purpose: specify how many tx credits are available to the tx queue group
+ *   Value: An absolute or relative, positive or negative credit value
+ *       The 'A' bit specifies whether the value is absolute or relative.
+ *       The 'S' bit specifies whether the value is positive or negative.
+ *       A negative value can only be relative, not absolute.
+ *       An absolute value replaces any prior credit value the host has for
+ *       the tx queue group in question.
+ *       A relative value is added to the prior credit value the host has for
+ *       the tx queue group in question.
+ * - sign
+ *   Bit 14
+ *   Purpose: specify whether the credit count is positive or negative
+ *   Value: 0 -> positive, 1 -> negative
+ * - absolute
+ *   Bit 15
+ *   Purpose: specify whether the credit count is absolute or relative
+ *   Value: 0 -> relative, 1 -> absolute
+ * - txq_group_id
+ *   Bits 23:16
+ *   Purpose: indicate which tx queue group's credit and/or membership are
+ *       being specified
+ *   Value: 0 to max_tx_queue_groups-1
+ * - reserved
+ *   Bits 30:16
+ *   Value: 0x0
+ * - eXtension
+ *   Bit 31
+ *   Purpose: specify whether another tx queue group info element follows
+ *   Value: 0 -> no more tx queue group information elements
+ *          1 -> another tx queue group information element immediately follows
+ * - ac_mask
+ *   Bits 15:0
+ *   Purpose: specify which Access Categories belong to the tx queue group
+ *   Value: bit-OR of masks for the ACs (WMM and extension) that belong to
+ *       the tx queue group.
+ *       The AC bit-mask values are obtained by left-shifting by the
+ *       corresponding HTT_AC_WMM enum values, e.g. (1 << HTT_AC_WMM_BE) == 0x1
+ * - vdev_id_mask
+ *   Bits 31:16
+ *   Purpose: specify which vdev's tx queues belong to the tx queue group
+ *   Value: bit-OR of masks based on the IDs of the vdevs whose tx queues
+ *       belong to the tx queue group.
+ *       For example, if vdev IDs 1 and 4 belong to a tx queue group, the
+ *       vdev_id_mask would be (1 << 1) | (1 << 4) = 0x12
+ */
+PREPACK struct htt_txq_group {
+    A_UINT32
+        credit_count:      14,
+        sign:               1,
+        absolute:           1,
+        tx_queue_group_id:  8,
+        reserved0:          7,
+        extension:          1;
+    A_UINT32
+        ac_mask:           16,
+        vdev_id_mask:      16;
+} POSTPACK;
+
+/* first word */
+#define HTT_TXQ_GROUP_CREDIT_COUNT_S 0
+#define HTT_TXQ_GROUP_CREDIT_COUNT_M 0x00003fff
+#define HTT_TXQ_GROUP_SIGN_S         14
+#define HTT_TXQ_GROUP_SIGN_M         0x00004000
+#define HTT_TXQ_GROUP_ABS_S          15
+#define HTT_TXQ_GROUP_ABS_M          0x00008000
+#define HTT_TXQ_GROUP_ID_S           16
+#define HTT_TXQ_GROUP_ID_M           0x00ff0000
+#define HTT_TXQ_GROUP_EXT_S          31
+#define HTT_TXQ_GROUP_EXT_M          0x80000000
+/* second word */
+#define HTT_TXQ_GROUP_AC_MASK_S      0
+#define HTT_TXQ_GROUP_AC_MASK_M      0x0000ffff
+#define HTT_TXQ_GROUP_VDEV_ID_MASK_S 16
+#define HTT_TXQ_GROUP_VDEV_ID_MASK_M 0xffff0000
+
+#define HTT_TXQ_GROUP_CREDIT_COUNT_SET(_info, _val)            \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_CREDIT_COUNT, _val);   \
+        ((_info) |= ((_val) << HTT_TXQ_GROUP_CREDIT_COUNT_S)); \
+    } while (0)
+#define HTT_TXQ_GROUP_CREDIT_COUNT_GET(_info)                  \
+    (((_info) & HTT_TXQ_GROUP_CREDIT_COUNT_M) >> HTT_TXQ_GROUP_CREDIT_COUNT_S)
+
+#define HTT_TXQ_GROUP_SIGN_SET(_info, _val)                    \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_SIGN, _val);           \
+        ((_info) |= ((_val) << HTT_TXQ_GROUP_SIGN_S));         \
+    } while (0)
+#define HTT_TXQ_GROUP_SIGN_GET(_info)                          \
+    (((_info) & HTT_TXQ_GROUP_SIGN_M) >> HTT_TXQ_GROUP_SIGN_S)
+
+#define HTT_TXQ_GROUP_ABS_SET(_info, _val)                     \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_ABS, _val);            \
+        ((_info) |= ((_val) << HTT_TXQ_GROUP_ABS_S));          \
+    } while (0)
+#define HTT_TXQ_GROUP_ABS_GET(_info)                           \
+    (((_info) & HTT_TXQ_GROUP_ABS_M) >> HTT_TXQ_GROUP_ABS_S)
+
+#define HTT_TXQ_GROUP_ID_SET(_info, _val)                      \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_ID, _val);             \
+        ((_info) |= ((_val) << HTT_TXQ_GROUP_ID_S));           \
+    } while (0)
+#define HTT_TXQ_GROUP_ID_GET(_info)                            \
+    (((_info) & HTT_TXQ_GROUP_ID_M) >> HTT_TXQ_GROUP_ID_S)
+
+#define HTT_TXQ_GROUP_EXT_SET(_info, _val)                     \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_EXT, _val);            \
+        ((_info) |= ((_val) << HTT_TXQ_GROUP_EXT_S));          \
+    } while (0)
+#define HTT_TXQ_GROUP_EXT_GET(_info)                           \
+    (((_info) & HTT_TXQ_GROUP_EXT_M) >> HTT_TXQ_GROUP_EXT_S)
+
+#define HTT_TXQ_GROUP_AC_MASK_SET(_info, _val)                 \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_AC_MASK, _val);        \
+        ((_info) |= ((_val) << HTT_TXQ_GROUP_AC_MASK_S));      \
+    } while (0)
+#define HTT_TXQ_GROUP_AC_MASK_GET(_info)                       \
+    (((_info) & HTT_TXQ_GROUP_AC_MASK_M) >> HTT_TXQ_GROUP_AC_MASK_S)
+
+#define HTT_TXQ_GROUP_VDEV_ID_MASK_SET(_info, _val)            \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_VDEV_ID_MASK, _val);   \
+        ((_info) |= ((_val) << HTT_TXQ_GROUP_VDEV_ID_MASK_S)); \
+    } while (0)
+#define HTT_TXQ_GROUP_VDEV_ID_MASK_GET(_info)                  \
+    (((_info) & HTT_TXQ_GROUP_VDEV_ID_MASK_M) >> HTT_TXQ_GROUP_VDEV_ID_MASK_S)
+
+/**
+ * @brief target -> host TX completion indication message definition
+ *
+ * @details
+ * The following diagram shows the format of the TX completion indication sent
+ * from the target to the host
+ *
+ *          |31      25|    24|23        16| 15 |14 11|10   8|7          0|
+ *          |-------------------------------------------------------------|
+ * header:  | reserved |append|     num    | t_i| tid |status|  msg_type  |
+ *          |-------------------------------------------------------------|
+ * payload: |            MSDU1 ID          |         MSDU0 ID             |
+ *          |-------------------------------------------------------------|
+ *          :            MSDU3 ID          :         MSDU2 ID             :
+ *          |-------------------------------------------------------------|
+ *          |          struct htt_tx_compl_ind_append_retries             |
+ *          - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+ *
+ * The following field definitions describe the format of the TX completion
+ * indication sent from the target to the host
+ * Header fields:
+ * - msg_type
+ *   Bits 7:0
+ *   Purpose: identifies this as HTT TX completion indication
+ *   Value: 0x7
+ * - status
+ *   Bits 10:8
+ *   Purpose: the TX completion status of payload fragmentations descriptors
+ *   Value: could be HTT_TX_COMPL_IND_STAT_OK or HTT_TX_COMPL_IND_STAT_DISCARD
+ * - tid
+ *   Bits 14:11
+ *   Purpose: the tid associated with those fragmentation descriptors. It is
+ *            valid or not, depending on the tid_invalid bit.
+ *   Value: 0 to 15
+ * - tid_invalid
+ *   Bits 15:15
+ *   Purpose: this bit indicates whether the tid field is valid or not
+ *   Value: 0 indicates valid; 1 indicates invalid
+ * - num
+ *   Bits 23:16
+ *   Purpose: the number of payload in this indication
+ *   Value: 1 to 255
+ * - append
+ *   Bits 24:24
+ *   Purpose: append the struct htt_tx_compl_ind_append_retries which contains
+ *            the number of tx retries for one MSDU at the end of this message
+ *   Value: 0 indicates no appending; 1 indicates appending
+ * Payload fields:
+ * - hmsdu_id
+ *   Bits 15:0
+ *   Purpose: this ID is used to track the Tx buffer in host
+ *   Value: 0 to "size of host MSDU descriptor pool - 1"
+ */
+
+#define HTT_TX_COMPL_IND_STATUS_S      8
+#define HTT_TX_COMPL_IND_STATUS_M      0x00000700
+#define HTT_TX_COMPL_IND_TID_S         11
+#define HTT_TX_COMPL_IND_TID_M         0x00007800
+#define HTT_TX_COMPL_IND_TID_INV_S     15
+#define HTT_TX_COMPL_IND_TID_INV_M     0x00008000
+#define HTT_TX_COMPL_IND_NUM_S         16
+#define HTT_TX_COMPL_IND_NUM_M         0x00ff0000
+#define HTT_TX_COMPL_IND_APPEND_S      24
+#define HTT_TX_COMPL_IND_APPEND_M      0x01000000
+
+#define HTT_TX_COMPL_IND_STATUS_SET(_info, _val)                        \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_STATUS, _val);               \
+        ((_info) |= ((_val) << HTT_TX_COMPL_IND_STATUS_S));             \
+    } while (0)
+#define HTT_TX_COMPL_IND_STATUS_GET(_info)                              \
+    (((_info) & HTT_TX_COMPL_IND_STATUS_M) >> HTT_TX_COMPL_IND_STATUS_S)
+#define HTT_TX_COMPL_IND_NUM_SET(_info, _val)                           \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_NUM, _val);                  \
+        ((_info) |= ((_val) << HTT_TX_COMPL_IND_NUM_S));                \
+    } while (0)
+#define HTT_TX_COMPL_IND_NUM_GET(_info)                             \
+    (((_info) & HTT_TX_COMPL_IND_NUM_M) >> HTT_TX_COMPL_IND_NUM_S)
+#define HTT_TX_COMPL_IND_TID_SET(_info, _val)                           \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_TID, _val);                  \
+        ((_info) |= ((_val) << HTT_TX_COMPL_IND_TID_S));                \
+    } while (0)
+#define HTT_TX_COMPL_IND_TID_GET(_info)                             \
+    (((_info) & HTT_TX_COMPL_IND_TID_M) >> HTT_TX_COMPL_IND_TID_S)
+#define HTT_TX_COMPL_IND_TID_INV_SET(_info, _val)                       \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_TID_INV, _val);              \
+        ((_info) |= ((_val) << HTT_TX_COMPL_IND_TID_INV_S));            \
+    } while (0)
+#define HTT_TX_COMPL_IND_TID_INV_GET(_info)                         \
+    (((_info) & HTT_TX_COMPL_IND_TID_INV_M) >>                      \
+     HTT_TX_COMPL_IND_TID_INV_S)
+#define HTT_TX_COMPL_IND_APPEND_SET(_info, _val)                           \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_APPEND, _val);                  \
+        ((_info) |= ((_val) << HTT_TX_COMPL_IND_APPEND_S));                \
+    } while (0)
+#define HTT_TX_COMPL_IND_APPEND_GET(_info)                             \
+    (((_info) & HTT_TX_COMPL_IND_APPEND_M) >> HTT_TX_COMPL_IND_APPEND_S)
+
+#define HTT_TX_COMPL_CTXT_SZ                sizeof(A_UINT16)
+#define HTT_TX_COMPL_CTXT_NUM(_bytes)       ((_bytes) >> 1)
+
+#define HTT_TX_COMPL_INV_MSDU_ID            0xffff
+
+#define HTT_TX_COMPL_IND_STAT_OK          0
+#define HTT_TX_COMPL_IND_STAT_DISCARD     1
+#define HTT_TX_COMPL_IND_STAT_NO_ACK      2
+#define HTT_TX_COMPL_IND_STAT_POSTPONE    3
+/*
+ * The PEER_DEL tx completion status is used for HL cases
+ * where the peer the frame is for has been deleted.
+ * The host has already discarded its copy of the frame, but
+ * it still needs the tx completion to restore its credit.
+ */
+#define HTT_TX_COMPL_IND_STAT_PEER_DEL    4
+
+
+#define HTT_TX_COMPL_IND_APPEND_SET_MORE_RETRY(f)  ((f) |= 0x1)
+#define HTT_TX_COMPL_IND_APPEND_CLR_MORE_RETRY(f)  ((f) &= (~0x1))
+
+PREPACK struct htt_tx_compl_ind_base {
+    A_UINT32 hdr;
+    A_UINT16 payload[1/*or more*/];
+} POSTPACK;
+
+PREPACK struct htt_tx_compl_ind_append_retries {
+    A_UINT16 msdu_id;
+    A_UINT8  tx_retries;
+    A_UINT8  flag; /* Bit 0, 1: another append_retries struct is appended
+                             0: this is the last append_retries struct */
+} POSTPACK;
+
+/**
+ * @brief target -> host rate-control update indication message
+ *
+ * @details
+ * The following diagram shows the format of the RC Update message
+ * sent from the target to the host, while processing the tx-completion
+ * of a transmitted PPDU.
+ *
+ *          |31          24|23           16|15            8|7            0|
+ *          |-------------------------------------------------------------|
+ *          |            peer ID           |    vdev ID    |    msg_type  |
+ *          |-------------------------------------------------------------|
+ *          |  MAC addr 3  |  MAC addr 2   |   MAC addr 1  |  MAC addr 0  |
+ *          |-------------------------------------------------------------|
+ *          |   reserved   |   num elems   |   MAC addr 5  |  MAC addr 4  |
+ *          |-------------------------------------------------------------|
+ *          |                              :                              |
+ *          :         HTT_RC_TX_DONE_PARAMS (DWORD-aligned)               :
+ *          |                              :                              |
+ *          |-------------------------------------------------------------|
+ *          |                              :                              |
+ *          :         HTT_RC_TX_DONE_PARAMS (DWORD-aligned)               :
+ *          |                              :                              |
+ *          |-------------------------------------------------------------|
+ *          :                                                             :
+ *          - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+ *
+ */
+
+typedef struct {
+    A_UINT32 rate_code; /* rate code, bw, chain mask sgi */
+    A_UINT32 rate_code_flags;
+    A_UINT32 flags;       /* Encodes information such as excessive
+                                                  retransmission, aggregate, some info
+                                                  from .11 frame control,
+                                                  STBC, LDPC, (SGI and Tx Chain Mask
+                                                  are encoded in ptx_rc->flags field),
+                                                  AMPDU truncation (BT/time based etc.),
+                                                  RTS/CTS attempt  */
+
+    A_UINT32 num_enqued;  /* # of MPDUs (for non-AMPDU 1) for this rate */
+    A_UINT32 num_retries; /* Total # of transmission attempt for this rate */
+    A_UINT32 num_failed;  /* # of failed MPDUs in A-MPDU, 0 otherwise */
+    A_UINT32 ack_rssi;    /* ACK RSSI: b'7..b'0 avg RSSI across all chain */
+    A_UINT32 time_stamp ; /* ACK timestamp (helps determine age) */
+    A_UINT32 is_probe;   /* Valid if probing. Else, 0 */
+} HTT_RC_TX_DONE_PARAMS;
+
+#define HTT_RC_UPDATE_CTXT_SZ     (sizeof(HTT_RC_TX_DONE_PARAMS)) /* bytes */
+#define HTT_RC_UPDATE_HDR_SZ      (12) /* bytes */
+
+#define HTT_RC_UPDATE_MAC_ADDR_OFFSET   (4) /* bytes */
+#define HTT_RC_UPDATE_MAC_ADDR_LENGTH   IEEE80211_ADDR_LEN /* bytes */
+
+#define HTT_RC_UPDATE_VDEVID_S    8
+#define HTT_RC_UPDATE_VDEVID_M    0xff00
+#define HTT_RC_UPDATE_PEERID_S    16
+#define HTT_RC_UPDATE_PEERID_M    0xffff0000
+
+#define HTT_RC_UPDATE_NUM_ELEMS_S   16
+#define HTT_RC_UPDATE_NUM_ELEMS_M   0x00ff0000
+
+#define HTT_RC_UPDATE_VDEVID_SET(_info, _val)              \
+    do {                                                   \
+        HTT_CHECK_SET_VAL(HTT_RC_UPDATE_VDEVID, _val);     \
+        ((_info) |= ((_val) << HTT_RC_UPDATE_VDEVID_S));   \
+    } while (0)
+
+#define HTT_RC_UPDATE_VDEVID_GET(_info)                    \
+    (((_info) & HTT_RC_UPDATE_VDEVID_M) >> HTT_RC_UPDATE_VDEVID_S)
+
+#define HTT_RC_UPDATE_PEERID_SET(_info, _val)              \
+    do {                                                   \
+        HTT_CHECK_SET_VAL(HTT_RC_UPDATE_PEERID, _val);     \
+        ((_info) |= ((_val) << HTT_RC_UPDATE_PEERID_S));   \
+    } while (0)
+
+#define HTT_RC_UPDATE_PEERID_GET(_info)                    \
+    (((_info) & HTT_RC_UPDATE_PEERID_M) >> HTT_RC_UPDATE_PEERID_S)
+
+#define HTT_RC_UPDATE_NUM_ELEMS_SET(_info, _val)            \
+    do {                                                    \
+        HTT_CHECK_SET_VAL(HTT_RC_UPDATE_NUM_ELEMS, _val);   \
+        ((_info) |= ((_val) << HTT_RC_UPDATE_NUM_ELEMS_S)); \
+    } while (0)
+
+#define HTT_RC_UPDATE_NUM_ELEMS_GET(_info)                  \
+    (((_info) & HTT_RC_UPDATE_NUM_ELEMS_M) >> HTT_RC_UPDATE_NUM_ELEMS_S)
+
+/**
+ * @brief target -> host rx fragment indication message definition
+ *
+ * @details
+ * The following field definitions describe the format of the rx fragment
+ * indication message sent from the target to the host.
+ * The rx fragment indication message shares the format of the
+ * rx indication message, but not all fields from the rx indication message
+ * are relevant to the rx fragment indication message.
+ *
+ *
+ *     |31       24|23         18|17|16|15|14|13|12|11|10|9|8|7|6|5|4     0|
+ *     |-----------+-------------------+---------------------+-------------|
+ *     |             peer ID           |     |FV| ext TID    |  msg type   |
+ *     |-------------------------------------------------------------------|
+ *     |                                           |    flush    |  flush  |
+ *     |                                           |     end     |  start  |
+ *     |                                           |   seq num   | seq num |
+ *     |-------------------------------------------------------------------|
+ *     |           reserved            |         FW rx desc bytes          |
+ *     |-------------------------------------------------------------------|
+ *     |                                                     | FW MSDU Rx  |
+ *     |                                                     |   desc B0   |
+ *     |-------------------------------------------------------------------|
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as an rx fragment indication message
+ *     Value: 0xa
+ *   - EXT_TID
+ *     Bits 12:8
+ *     Purpose: identify the traffic ID of the rx data, including
+ *         special "extended" TID values for multicast, broadcast, and
+ *         non-QoS data frames
+ *     Value: 0-15 for regular TIDs, or >= 16 for bcast/mcast/non-QoS
+ *   - FLUSH_VALID (FV)
+ *     Bit 13
+ *     Purpose: indicate whether the flush IE (start/end sequence numbers)
+ *         is valid
+ *     Value:
+ *         1 -> flush IE is valid and needs to be processed
+ *         0 -> flush IE is not valid and should be ignored
+ *   - PEER_ID
+ *     Bits 31:16
+ *     Purpose: Identify, by ID, which peer sent the rx data
+ *     Value: ID of the peer who sent the rx data
+ *   - FLUSH_SEQ_NUM_START
+ *     Bits 5:0
+ *     Purpose: Indicate the start of a series of MPDUs to flush
+ *         Not all MPDUs within this series are necessarily valid - the host
+ *         must check each sequence number within this range to see if the
+ *         corresponding MPDU is actually present.
+ *         This field is only valid if the FV bit is set.
+ *     Value:
+ *         The sequence number for the first MPDUs to check to flush.
+ *         The sequence number is masked by 0x3f.
+ *   - FLUSH_SEQ_NUM_END
+ *     Bits 11:6
+ *     Purpose: Indicate the end of a series of MPDUs to flush
+ *     Value:
+ *         The sequence number one larger than the sequence number of the
+ *         last MPDU to check to flush.
+ *         The sequence number is masked by 0x3f.
+ *         Not all MPDUs within this series are necessarily valid - the host
+ *         must check each sequence number within this range to see if the
+ *         corresponding MPDU is actually present.
+ *         This field is only valid if the FV bit is set.
+ * Rx descriptor fields:
+ *   - FW_RX_DESC_BYTES
+ *     Bits 15:0
+ *     Purpose: Indicate how many bytes in the Rx indication are used for
+ *         FW Rx descriptors
+ *     Value: 1
+ */
+#define HTT_RX_FRAG_IND_HDR_PREFIX_SIZE32         2
+
+#define HTT_RX_FRAG_IND_FW_DESC_BYTE_OFFSET       12
+
+#define HTT_RX_FRAG_IND_EXT_TID_SET     HTT_RX_IND_EXT_TID_SET
+#define HTT_RX_FRAG_IND_EXT_TID_GET     HTT_RX_IND_EXT_TID_GET
+
+#define HTT_RX_FRAG_IND_PEER_ID_SET     HTT_RX_IND_PEER_ID_SET
+#define HTT_RX_FRAG_IND_PEER_ID_GET     HTT_RX_IND_PEER_ID_GET
+
+#define HTT_RX_FRAG_IND_FLUSH_VALID_SET HTT_RX_IND_FLUSH_VALID_SET
+#define HTT_RX_FRAG_IND_FLUSH_VALID_GET HTT_RX_IND_FLUSH_VALID_GET
+
+#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_START_SET \
+    HTT_RX_IND_FLUSH_SEQ_NUM_START_SET
+#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_START_GET \
+    HTT_RX_IND_FLUSH_SEQ_NUM_START_GET
+
+#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_END_SET \
+    HTT_RX_IND_FLUSH_SEQ_NUM_END_SET
+#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_END_GET \
+    HTT_RX_IND_FLUSH_SEQ_NUM_END_GET
+
+#define HTT_RX_FRAG_IND_FW_RX_DESC_BYTES_GET  HTT_RX_IND_FW_RX_DESC_BYTES_GET
+
+#define HTT_RX_FRAG_IND_BYTES                 \
+    (4 /* msg hdr */ +                        \
+     4 /* flush spec */ +                     \
+     4 /* (unused) FW rx desc bytes spec */ + \
+     4 /* FW rx desc */)
+
+/**
+ * @brief target -> host test message definition
+ *
+ * @details
+ * The following field definitions describe the format of the test
+ * message sent from the target to the host.
+ * The message consists of a 4-octet header, followed by a variable
+ * number of 32-bit integer values, followed by a variable number
+ * of 8-bit character values.
+ *
+ * |31                         16|15           8|7            0|
+ * |-----------------------------------------------------------|
+ * |          num chars          |   num ints   |   msg type   |
+ * |-----------------------------------------------------------|
+ * |                           int 0                           |
+ * |-----------------------------------------------------------|
+ * |                           int 1                           |
+ * |-----------------------------------------------------------|
+ * |                            ...                            |
+ * |-----------------------------------------------------------|
+ * |    char 3    |    char 2    |    char 1    |    char 0    |
+ * |-----------------------------------------------------------|
+ * |              |              |      ...     |    char 4    |
+ * |-----------------------------------------------------------|
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a test message
+ *     Value: HTT_MSG_TYPE_TEST
+ *   - NUM_INTS
+ *     Bits 15:8
+ *     Purpose: indicate how many 32-bit integers follow the message header
+ *   - NUM_CHARS
+ *     Bits 31:16
+ *     Purpose: indicate how many 8-bit charaters follow the series of integers
+ */
+#define HTT_RX_TEST_NUM_INTS_M   0xff00
+#define HTT_RX_TEST_NUM_INTS_S   8
+#define HTT_RX_TEST_NUM_CHARS_M  0xffff0000
+#define HTT_RX_TEST_NUM_CHARS_S  16
+
+#define HTT_RX_TEST_NUM_INTS_SET(word, value)                           \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_TEST_NUM_INTS, value);                 \
+        (word) |= (value)  << HTT_RX_TEST_NUM_INTS_S;                   \
+    } while (0)
+#define HTT_RX_TEST_NUM_INTS_GET(word) \
+    (((word) & HTT_RX_TEST_NUM_INTS_M) >> HTT_RX_TEST_NUM_INTS_S)
+
+#define HTT_RX_TEST_NUM_CHARS_SET(word, value)                          \
+    do {                                                                \
+        HTT_CHECK_SET_VAL(HTT_RX_TEST_NUM_CHARS, value);                \
+        (word) |= (value)  << HTT_RX_TEST_NUM_CHARS_S;                  \
+    } while (0)
+#define HTT_RX_TEST_NUM_CHARS_GET(word) \
+    (((word) & HTT_RX_TEST_NUM_CHARS_M) >> HTT_RX_TEST_NUM_CHARS_S)
+
+/**
+ * @brief target -> host packet log message
+ *
+ * @details
+ * The following field definitions describe the format of the packet log
+ * message sent from the target to the host.
+ * The message consists of a 4-octet header,followed by a variable number
+ * of 32-bit character values.
+ *
+ * |31          24|23          16|15           8|7            0|
+ * |-----------------------------------------------------------|
+ * |              |              |              |   msg type   |
+ * |-----------------------------------------------------------|
+ * |                        payload                            |
+ * |-----------------------------------------------------------|
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a test message
+ *     Value: HTT_MSG_TYPE_PACKETLOG
+ */
+PREPACK struct htt_pktlog_msg {
+    A_UINT32    header;
+    A_UINT32   payload[1/* or more */];
+} POSTPACK;
+
+
+/*
+ * Rx reorder statistics
+ * NB: all the fields must be defined in 4 octets size.
+ */
+struct rx_reorder_stats {
+    /* Non QoS MPDUs received */
+    A_UINT32 deliver_non_qos;
+    /* MPDUs received in-order */
+    A_UINT32 deliver_in_order;
+    /* Flush due to reorder timer expired */
+    A_UINT32 deliver_flush_timeout;
+    /* Flush due to move out of window */
+    A_UINT32 deliver_flush_oow;
+    /* Flush due to DELBA */
+    A_UINT32 deliver_flush_delba;
+    /* MPDUs dropped due to FCS error */
+    A_UINT32 fcs_error;
+    /* MPDUs dropped due to monitor mode non-data packet */
+    A_UINT32 mgmt_ctrl;
+    /* Unicast-data MPDUs dropped due to invalid peer */
+    A_UINT32 invalid_peer;
+    /* MPDUs dropped due to duplication (non aggregation) */
+    A_UINT32 dup_non_aggr;
+    /* MPDUs dropped due to processed before */
+    A_UINT32 dup_past;
+    /* MPDUs dropped due to duplicate in reorder queue */
+    A_UINT32 dup_in_reorder;
+    /* Reorder timeout happened */
+    A_UINT32 reorder_timeout;
+    /* invalid bar ssn */
+    A_UINT32 invalid_bar_ssn;
+    /* reorder reset due to bar ssn */
+    A_UINT32 ssn_reset;
+    /* Flush due to delete peer */
+    A_UINT32 deliver_flush_delpeer;
+    /* Flush due to offload*/
+    A_UINT32 deliver_flush_offload;
+    /* Flush due to out of buffer*/
+    A_UINT32 deliver_flush_oob;
+    /* MPDUs dropped due to PN check fail */
+    A_UINT32 pn_fail;
+    /* MPDUs dropped due to unable to allocate memory  */
+    A_UINT32 store_fail;
+    /* Number of times the tid pool alloc succeeded */
+    A_UINT32 tid_pool_alloc_succ;
+    /* Number of times the MPDU pool alloc succeeded */
+    A_UINT32 mpdu_pool_alloc_succ;
+    /* Number of times the MSDU pool alloc succeeded */
+    A_UINT32 msdu_pool_alloc_succ;
+    /* Number of times the tid pool alloc failed */
+    A_UINT32 tid_pool_alloc_fail;
+    /* Number of times the MPDU pool alloc failed */
+    A_UINT32 mpdu_pool_alloc_fail;
+    /* Number of times the MSDU pool alloc failed */
+    A_UINT32 msdu_pool_alloc_fail;
+    /* Number of times the tid pool freed */
+    A_UINT32 tid_pool_free;
+    /* Number of times the MPDU pool freed */
+    A_UINT32 mpdu_pool_free;
+    /* Number of times the MSDU pool freed */
+    A_UINT32 msdu_pool_free;
+    /* number of MSDUs undelivered to HTT and queued to Data Rx MSDU free list*/
+    A_UINT32 msdu_queued;
+    /* Number of MSDUs released from Data Rx MSDU list to MAC ring */
+    A_UINT32 msdu_recycled;
+    /* Number of MPDUs with invalid peer but A2 found in AST */
+    A_UINT32 invalid_peer_a2_in_ast;
+    /* Number of MPDUs with invalid peer but A3 found in AST */
+    A_UINT32 invalid_peer_a3_in_ast;
+    /* Number of MPDUs with invalid peer, Broadcast or Multicast frame */
+    A_UINT32 invalid_peer_bmc_mpdus;
+    /* Number of MSDUs with err attention word */
+    A_UINT32 rxdesc_err_att;
+    /* Number of MSDUs with flag of peer_idx_invalid */
+    A_UINT32 rxdesc_err_peer_idx_inv;
+    /* Number of MSDUs with flag of peer_idx_timeout */
+    A_UINT32 rxdesc_err_peer_idx_to;
+    /* Number of MSDUs with flag of overflow */
+    A_UINT32 rxdesc_err_ov;
+    /* Number of MSDUs with flag of msdu_length_err */
+    A_UINT32 rxdesc_err_msdu_len;
+    /* Number of MSDUs with flag of mpdu_length_err */
+    A_UINT32 rxdesc_err_mpdu_len;
+    /* Number of MSDUs with flag of tkip_mic_err */
+    A_UINT32 rxdesc_err_tkip_mic;
+    /* Number of MSDUs with flag of decrypt_err */
+    A_UINT32 rxdesc_err_decrypt;
+    /* Number of MSDUs with flag of fcs_err */
+    A_UINT32 rxdesc_err_fcs;
+    /* Number of Unicast (bc_mc bit is not set in attention word)
+     * frames with invalid peer handler
+     */
+    A_UINT32 rxdesc_uc_msdus_inv_peer;
+    /* Number of unicast frame directly (direct bit is set in attention word)
+     * to DUT with invalid peer handler
+     */
+    A_UINT32 rxdesc_direct_msdus_inv_peer;
+    /* Number of Broadcast/Multicast (bc_mc bit set in attention word)
+     * frames with invalid peer handler
+     */
+    A_UINT32 rxdesc_bmc_msdus_inv_peer;
+    /* Number of MSDUs dropped due to no first MSDU flag */
+    A_UINT32 rxdesc_no_1st_msdu;
+    /* Number of MSDUs droped due to ring overflow */
+    A_UINT32 msdu_drop_ring_ov;
+    /* Number of MSDUs dropped due to FC mismatch */
+    A_UINT32 msdu_drop_fc_mismatch;
+    /* Number of MSDUs dropped due to mgt frame in Remote ring */
+    A_UINT32 msdu_drop_mgmt_remote_ring;
+    /* Number of MSDUs dropped due to errors not reported in attention word */
+    A_UINT32 msdu_drop_misc;
+    /* Number of MSDUs go to offload before reorder */
+    A_UINT32 offload_msdu_wal;
+    /* Number of data frame dropped by offload after reorder */
+    A_UINT32 offload_msdu_reorder;
+    /* Number of MPDUs with sequence number in the past and within the BA window */
+    A_UINT32 dup_past_within_window;
+    /* Number of MPDUs with sequence number in the past and outside the BA window */
+    A_UINT32 dup_past_outside_window;
+    /* Number of MSDUs with decrypt/MIC error */
+    A_UINT32 rxdesc_err_decrypt_mic;
+    /* Number of data MSDUs received on both local and remote rings */
+    A_UINT32 data_msdus_on_both_rings;
+};
+
+
+/*
+ * Rx Remote buffer statistics
+ * NB: all the fields must be defined in 4 octets size.
+ */
+struct rx_remote_buffer_mgmt_stats {
+    /* Total number of MSDUs reaped for Rx processing */
+    A_UINT32 remote_reaped;
+    /* MSDUs recycled within firmware */
+    A_UINT32 remote_recycled;
+    /* MSDUs stored by Data Rx */
+    A_UINT32 data_rx_msdus_stored;
+    /* Number of HTT indications from WAL Rx MSDU */
+    A_UINT32 wal_rx_ind;
+    /* Number of unconsumed HTT indications from WAL Rx MSDU */
+    A_UINT32 wal_rx_ind_unconsumed;
+    /* Number of HTT indications from Data Rx MSDU */
+    A_UINT32 data_rx_ind;
+    /* Number of unconsumed HTT indications from Data Rx MSDU */
+    A_UINT32 data_rx_ind_unconsumed;
+    /* Number of HTT indications from ATHBUF */
+    A_UINT32 athbuf_rx_ind;
+    /* Number of remote buffers requested for refill */
+    A_UINT32 refill_buf_req;
+    /* Number of remote buffers filled by the host */
+    A_UINT32 refill_buf_rsp;
+    /* Number of times MAC hw_index = f/w write_index */
+    A_INT32 mac_no_bufs;
+    /* Number of times f/w write_index = f/w read_index for MAC Rx ring */
+    A_INT32 fw_indices_equal;
+    /* Number of times f/w finds no buffers to post */
+    A_INT32 host_no_bufs;
+};
+
+/*
+ * TXBF MU/SU packets and NDPA statistics
+ * NB: all the fields must be defined in 4 octets size.
+ */
+struct rx_txbf_musu_ndpa_pkts_stats {
+    A_UINT32 number_mu_pkts;           /* number of TXBF MU packets received */
+    A_UINT32 number_su_pkts;           /* number of TXBF SU packets received */
+    A_UINT32 txbf_directed_ndpa_count; /* number of TXBF directed NDPA */
+    A_UINT32 txbf_ndpa_retry_count;    /* number of TXBF retried NDPA */
+    A_UINT32 txbf_total_ndpa_count;    /* total number of TXBF NDPA */
+
+    A_UINT32 reserved[3]; /* must be set to 0x0 */
+};
+
+
+/*
+ * htt_dbg_stats_status -
+ * present -     The requested stats have been delivered in full.
+ *               This indicates that either the stats information was contained
+ *               in its entirety within this message, or else this message
+ *               completes the delivery of the requested stats info that was
+ *               partially delivered through earlier STATS_CONF messages.
+ * partial -     The requested stats have been delivered in part.
+ *               One or more subsequent STATS_CONF messages with the same
+ *               cookie value will be sent to deliver the remainder of the
+ *               information.
+ * error -       The requested stats could not be delivered, for example due
+ *               to a shortage of memory to construct a message holding the
+ *               requested stats.
+ * invalid -     The requested stat type is either not recognized, or the
+ *               target is configured to not gather the stats type in question.
+ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+ * series_done - This special value indicates that no further stats info
+ *               elements are present within a series of stats info elems
+ *               (within a stats upload confirmation message).
+ */
+enum htt_dbg_stats_status {
+    HTT_DBG_STATS_STATUS_PRESENT = 0,
+    HTT_DBG_STATS_STATUS_PARTIAL = 1,
+    HTT_DBG_STATS_STATUS_ERROR   = 2,
+    HTT_DBG_STATS_STATUS_INVALID = 3,
+
+
+    HTT_DBG_STATS_STATUS_SERIES_DONE = 7
+};
+
+/**
+ * @brief target -> host statistics upload
+ *
+ * @details
+ * The following field definitions describe the format of the HTT target
+ * to host stats upload confirmation message.
+ * The message contains a cookie echoed from the HTT host->target stats
+ * upload request, which identifies which request the confirmation is
+ * for, and a series of tag-length-value stats information elements.
+ * The tag-length header for each stats info element also includes a
+ * status field, to indicate whether the request for the stat type in
+ * question was fully met, partially met, unable to be met, or invalid
+ * (if the stat type in question is disabled in the target).
+ * A special value of all 1's in this status field is used to indicate
+ * the end of the series of stats info elements.
+ *
+ *
+ * |31                         16|15           8|7   5|4       0|
+ * |------------------------------------------------------------|
+ * |                  reserved                  |    msg type   |
+ * |------------------------------------------------------------|
+ * |                        cookie LSBs                         |
+ * |------------------------------------------------------------|
+ * |                        cookie MSBs                         |
+ * |------------------------------------------------------------|
+ * |      stats entry length     |   reserved   |  S  |stat type|
+ * |------------------------------------------------------------|
+ * |                                                            |
+ * |                  type-specific stats info                  |
+ * |                                                            |
+ * |------------------------------------------------------------|
+ * |      stats entry length     |   reserved   |  S  |stat type|
+ * |------------------------------------------------------------|
+ * |                                                            |
+ * |                  type-specific stats info                  |
+ * |                                                            |
+ * |------------------------------------------------------------|
+ * |              n/a            |   reserved   | 111 |   n/a   |
+ * |------------------------------------------------------------|
+ * Header fields:
+ *  - MSG_TYPE
+ *    Bits 7:0
+ *    Purpose: identifies this is a statistics upload confirmation message
+ *    Value: 0x9
+ *  - COOKIE_LSBS
+ *    Bits 31:0
+ *    Purpose: Provide a mechanism to match a target->host stats confirmation
+ *        message with its preceding host->target stats request message.
+ *    Value: LSBs of the opaque cookie specified by the host-side requestor
+ *  - COOKIE_MSBS
+ *    Bits 31:0
+ *    Purpose: Provide a mechanism to match a target->host stats confirmation
+ *        message with its preceding host->target stats request message.
+ *    Value: MSBs of the opaque cookie specified by the host-side requestor
+ *
+ * Stats Information Element tag-length header fields:
+ *  - STAT_TYPE
+ *    Bits 4:0
+ *    Purpose: identifies the type of statistics info held in the
+ *        following information element
+ *    Value: htt_dbg_stats_type
+ *  - STATUS
+ *    Bits 7:5
+ *    Purpose: indicate whether the requested stats are present
+ *    Value: htt_dbg_stats_status, including a special value (0x7) to mark
+ *        the completion of the stats entry series
+ *  - LENGTH
+ *    Bits 31:16
+ *    Purpose: indicate the stats information size
+ *    Value: This field specifies the number of bytes of stats information
+ *       that follows the element tag-length header.
+ *       It is expected but not required that this length is a multiple of
+ *       4 bytes.  Even if the length is not an integer multiple of 4, the
+ *       subsequent stats entry header will begin on a 4-byte aligned
+ *       boundary.
+ */
+#define HTT_T2H_STATS_COOKIE_SIZE         8
+
+#define HTT_T2H_STATS_CONF_TAIL_SIZE      4
+
+#define HTT_T2H_STATS_CONF_HDR_SIZE       4
+
+#define HTT_T2H_STATS_CONF_TLV_HDR_SIZE   4
+
+#define HTT_T2H_STATS_CONF_TLV_TYPE_M     0x0000001f
+#define HTT_T2H_STATS_CONF_TLV_TYPE_S     0
+#define HTT_T2H_STATS_CONF_TLV_STATUS_M   0x000000e0
+#define HTT_T2H_STATS_CONF_TLV_STATUS_S   5
+#define HTT_T2H_STATS_CONF_TLV_LENGTH_M   0xffff0000
+#define HTT_T2H_STATS_CONF_TLV_LENGTH_S   16
+
+#define HTT_T2H_STATS_CONF_TLV_TYPE_SET(word, value)             \
+    do {                                                         \
+        HTT_CHECK_SET_VAL(HTT_T2H_STATS_CONF_TLV_TYPE, value);   \
+        (word) |= (value)  << HTT_T2H_STATS_CONF_TLV_TYPE_S;     \
+    } while (0)
+#define HTT_T2H_STATS_CONF_TLV_TYPE_GET(word) \
+    (((word) & HTT_T2H_STATS_CONF_TLV_TYPE_M) >> \
+    HTT_T2H_STATS_CONF_TLV_TYPE_S)
+
+#define HTT_T2H_STATS_CONF_TLV_STATUS_SET(word, value)             \
+    do {                                                         \
+        HTT_CHECK_SET_VAL(HTT_T2H_STATS_CONF_TLV_STATUS, value);   \
+        (word) |= (value)  << HTT_T2H_STATS_CONF_TLV_STATUS_S;     \
+    } while (0)
+#define HTT_T2H_STATS_CONF_TLV_STATUS_GET(word) \
+    (((word) & HTT_T2H_STATS_CONF_TLV_STATUS_M) >> \
+    HTT_T2H_STATS_CONF_TLV_STATUS_S)
+
+#define HTT_T2H_STATS_CONF_TLV_LENGTH_SET(word, value)             \
+    do {                                                         \
+        HTT_CHECK_SET_VAL(HTT_T2H_STATS_CONF_TLV_LENGTH, value);   \
+        (word) |= (value)  << HTT_T2H_STATS_CONF_TLV_LENGTH_S;     \
+    } while (0)
+#define HTT_T2H_STATS_CONF_TLV_LENGTH_GET(word) \
+    (((word) & HTT_T2H_STATS_CONF_TLV_LENGTH_M) >> \
+    HTT_T2H_STATS_CONF_TLV_LENGTH_S)
+
+#define HL_HTT_FW_RX_DESC_RSVD_SIZE 18
+#define HTT_MAX_AGGR 64
+#define HTT_HL_MAX_AGGR 18
+
+/**
+ * @brief host -> target FRAG DESCRIPTOR/MSDU_EXT DESC bank
+ *
+ * @details
+ * The following field definitions describe the format of the HTT host
+ * to target frag_desc/msdu_ext bank configuration message.
+ * The message contains the based address and the min and max id of the
+ * MSDU_EXT/FRAG_DESC that will be used by the HTT to map MSDU DESC and
+ * MSDU_EXT/FRAG_DESC.
+ * HTT will use id in HTT descriptor instead sending the frag_desc_ptr.
+ * In peregrine the firmware will use fragment_desc_ptr but in WIFI2.0
+ * the hardware does the mapping/translation.
+ *
+ * Total banks that can be configured is configured to 16.
+ *
+ * This should be called before any TX has be initiated by the HTT
+ *
+ * |31                         16|15           8|7   5|4       0|
+ * |------------------------------------------------------------|
+ * | DESC_SIZE    |  NUM_BANKS   | RES |SWP|pdev|    msg type   |
+ * |------------------------------------------------------------|
+ * |                 BANK0_BASE_ADDRESS (bits 31:0)             |
+#if HTT_PADDR64
+ * |                 BANK0_BASE_ADDRESS (bits 63:32)            |
+#endif
+ * |------------------------------------------------------------|
+ * |                            ...                             |
+ * |------------------------------------------------------------|
+ * |                 BANK15_BASE_ADDRESS (bits 31:0)            |
+#if HTT_PADDR64
+ * |                 BANK15_BASE_ADDRESS (bits 63:32)           |
+#endif
+ * |------------------------------------------------------------|
+ * |       BANK0_MAX_ID          |       BANK0_MIN_ID           |
+ * |------------------------------------------------------------|
+ * |                            ...                             |
+ * |------------------------------------------------------------|
+ * |       BANK15_MAX_ID         |       BANK15_MIN_ID          |
+ * |------------------------------------------------------------|
+ * Header fields:
+ *  - MSG_TYPE
+ *    Bits 7:0
+ *    Value: 0x6
+ *  for systems with 64-bit format for bus addresses:
+ *      - BANKx_BASE_ADDRESS_LO
+ *        Bits 31:0
+ *        Purpose: Provide a mechanism to specify the base address of the
+ *             MSDU_EXT bank physical/bus address.
+ *        Value: lower 4 bytes of MSDU_EXT bank physical / bus address
+ *      - BANKx_BASE_ADDRESS_HI
+ *        Bits 31:0
+ *        Purpose: Provide a mechanism to specify the base address of the
+ *             MSDU_EXT bank physical/bus address.
+ *        Value: higher 4 bytes of MSDU_EXT bank physical / bus address
+ *  for systems with 32-bit format for bus addresses:
+ *      - BANKx_BASE_ADDRESS
+ *        Bits 31:0
+ *        Purpose: Provide a mechanism to specify the base address of the
+ *             MSDU_EXT bank physical/bus address.
+ *        Value: MSDU_EXT bank physical / bus address
+ *  - BANKx_MIN_ID
+ *    Bits 15:0
+ *    Purpose: Provide a mechanism to specify the min index that needs to
+ *          mapped.
+ *  - BANKx_MAX_ID
+ *    Bits 31:16
+ *    Purpose: Provide a mechanism to specify the max index that needs to
+ *          mapped.
+ *
+ */
+
+/** @todo Compress the fields to fit MAX HTT Message size, until then configure to a
+ *         safe value.
+ *  @note MAX supported banks is 16.
+ */
+#define HTT_TX_MSDU_EXT_BANK_MAX 4
+
+#define HTT_H2T_FRAG_DESC_BANK_PDEVID_M       0x300
+#define HTT_H2T_FRAG_DESC_BANK_PDEVID_S       8
+
+#define HTT_H2T_FRAG_DESC_BANK_SWAP_M         0x400
+#define HTT_H2T_FRAG_DESC_BANK_SWAP_S         10
+
+#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_M    0xff0000
+#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_S    16
+
+#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_M    0xff000000
+#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_S    24
+
+#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_M      0xffff
+#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_S      0
+
+#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_M      0xffff0000
+#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_S      16
+
+#define HTT_H2T_FRAG_DESC_BANK_PDEVID_SET(word, value)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_PDEVID, value); \
+        (word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_PDEVID_S);  \
+    } while (0)
+#define HTT_H2T_FRAG_DESC_BANK_PDEVID_GET(word) \
+    (((word) & HTT_H2T_FRAG_DESC_BANK_PDEVID_M) >> HTT_H2T_FRAG_DESC_BANK_PDEVID_S)
+
+#define HTT_H2T_FRAG_DESC_BANK_SWAP_SET(word, value)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_SWAP, value); \
+        (word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_SWAP_S);  \
+    } while (0)
+#define HTT_H2T_FRAG_DESC_BANK_SWAP_GET(word) \
+    (((word) & HTT_H2T_FRAG_DESC_BANK_SWAP_M) >> HTT_H2T_FRAG_DESC_BANK_SWAP_S)
+
+#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_SET(word, value)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_NUM_BANKS, value); \
+        (word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_S);  \
+    } while (0)
+#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_GET(word) \
+    (((word) & HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_M) >> HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_S)
+
+#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_SET(word, value)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_DESC_SIZE, value); \
+        (word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_S);  \
+    } while (0)
+#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_GET(word) \
+    (((word) & HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_M) >> HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_S)
+
+#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_SET(word, value)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_MIN_IDX, value); \
+        (word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_MIN_IDX_S);  \
+    } while (0)
+#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_GET(word) \
+    (((word) & HTT_H2T_FRAG_DESC_BANK_MIN_IDX_M) >> HTT_H2T_FRAG_DESC_BANK_MIN_IDX_S)
+
+#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_SET(word, value)           \
+    do {                                               \
+        HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_MAX_IDX, value); \
+        (word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_MAX_IDX_S);  \
+    } while (0)
+#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_GET(word) \
+    (((word) & HTT_H2T_FRAG_DESC_BANK_MAX_IDX_M) >> HTT_H2T_FRAG_DESC_BANK_MAX_IDX_S)
+
+
+/*
+ * TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T:
+ * This macro defines a htt_tx_frag_descXXX_bank_cfg_t in which any physical
+ * addresses are stored in a XXX-bit field.
+ * This macro is used to define both htt_tx_frag_desc32_bank_cfg_t and
+ * htt_tx_frag_desc64_bank_cfg_t structs.
+ */
+#define TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T(                                  \
+    _paddr_bits_,                                                              \
+    _paddr__bank_base_address_)                                                \
+PREPACK struct htt_tx_frag_desc ## _paddr_bits_ ## _bank_cfg_t {               \
+      /** word 0                                                               \
+       * msg_type:     8,                                                      \
+       * pdev_id:      2,                                                      \
+       * swap:         1,                                                      \
+       * reserved0:    5,                                                      \
+       * num_banks:    8,                                                      \
+       * desc_size:    8;                                                      \
+       */                                                                      \
+    A_UINT32 word0;                                                            \
+    /*                                                                         \
+     * If bank_base_address is 64 bits, the upper / lower halves are stored    \
+     * in little-endian order (bytes 0-3 in the first A_UINT32, bytes 4-7 in   \
+     * the second A_UINT32).                                                   \
+     */                                                                        \
+    _paddr__bank_base_address_[HTT_TX_MSDU_EXT_BANK_MAX];                      \
+    A_UINT32 bank_info[HTT_TX_MSDU_EXT_BANK_MAX];                              \
+} POSTPACK
+/* define htt_tx_frag_desc32_bank_cfg_t */
+TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T(32, HTT_VAR_PADDR32(bank_base_address));
+/* define htt_tx_frag_desc64_bank_cfg_t */
+TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T(64, HTT_VAR_PADDR64_LE(bank_base_address));
+/*
+ * Make htt_tx_frag_desc_bank_cfg_t be an alias for either
+ * htt_tx_frag_desc32_bank_cfg_t or htt_tx_frag_desc64_bank_cfg_t
+ */
+#if HTT_PADDR64
+    #define htt_tx_frag_desc_bank_cfg_t htt_tx_frag_desc64_bank_cfg_t
+#else
+    #define htt_tx_frag_desc_bank_cfg_t htt_tx_frag_desc32_bank_cfg_t
+#endif
+
+/**
+ * @brief target -> host HTT TX Credit total count update message definition
+ *
+ *|31                 16|15|14       9|  8    |7       0 |
+ *|---------------------+--+----------+-------+----------|
+ *|cur htt credit delta | Q| reserved | sign  | msg type |
+ *|------------------------------------------------------|
+ *
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a htt tx credit delta update message
+ *     Value: 0xe
+ *   - SIGN
+ *     Bits 8
+ *      identifies whether credit delta is positive or negative
+ *     Value:
+ *       - 0x0: credit delta is positive, rebalance in some buffers
+ *       - 0x1: credit delta is negative, rebalance out some buffers
+ *   - reserved
+ *     Bits 14:9
+ *     Value: 0x0
+ *   - TXQ_GRP
+ *     Bit 15
+ *     Purpose: indicates whether any tx queue group information elements
+ *         are appended to the tx credit update message
+ *     Value: 0 -> no tx queue group information element is present
+ *            1 -> a tx queue group information element immediately follows
+ *   - DELTA_COUNT
+ *     Bits 31:16
+ *     Purpose: Specify current htt credit delta absolute count
+ */
+
+#define HTT_TX_CREDIT_SIGN_BIT_M       0x00000100
+#define HTT_TX_CREDIT_SIGN_BIT_S       8
+#define HTT_TX_CREDIT_TXQ_GRP_M        0x00008000
+#define HTT_TX_CREDIT_TXQ_GRP_S        15
+#define HTT_TX_CREDIT_DELTA_ABS_M      0xffff0000
+#define HTT_TX_CREDIT_DELTA_ABS_S      16
+
+
+#define HTT_TX_CREDIT_SIGN_BIT_SET(word, value)                              \
+    do {                                                                     \
+        HTT_CHECK_SET_VAL(HTT_TX_CREDIT_SIGN_BIT, value);                    \
+        (word) |= (value)  << HTT_TX_CREDIT_SIGN_BIT_S;                      \
+    } while (0)
+
+#define HTT_TX_CREDIT_SIGN_BIT_GET(word) \
+    (((word) & HTT_TX_CREDIT_SIGN_BIT_M) >> HTT_TX_CREDIT_SIGN_BIT_S)
+
+#define HTT_TX_CREDIT_TXQ_GRP_SET(word, value)                              \
+    do {                                                                    \
+        HTT_CHECK_SET_VAL(HTT_TX_CREDIT_TXQ_GRP, value);                    \
+        (word) |= (value)  << HTT_TX_CREDIT_TXQ_GRP_S;                      \
+    } while (0)
+
+#define HTT_TX_CREDIT_TXQ_GRP_GET(word) \
+    (((word) & HTT_TX_CREDIT_TXQ_GRP_M) >> HTT_TX_CREDIT_TXQ_GRP_S)
+
+#define HTT_TX_CREDIT_DELTA_ABS_SET(word, value)                              \
+    do {                                                                      \
+        HTT_CHECK_SET_VAL(HTT_TX_CREDIT_DELTA_ABS, value);                    \
+        (word) |= (value)  << HTT_TX_CREDIT_DELTA_ABS_S;                      \
+    } while (0)
+
+#define HTT_TX_CREDIT_DELTA_ABS_GET(word) \
+    (((word) & HTT_TX_CREDIT_DELTA_ABS_M) >> HTT_TX_CREDIT_DELTA_ABS_S)
+
+
+#define HTT_TX_CREDIT_MSG_BYTES 4
+
+#define HTT_TX_CREDIT_SIGN_BIT_POSITIVE  0x0
+#define HTT_TX_CREDIT_SIGN_BIT_NEGATIVE  0x1
+
+
+/**
+ * @brief HTT WDI_IPA Operation Response Message
+ *
+ * @details
+ *  HTT WDI_IPA Operation Response message is sent by target
+ *  to host confirming suspend or resume operation.
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |             op_code             |      Rsvd      |     msg_type   |
+ *     |-------------------------------------------------------------------|
+ *     |             Rsvd                |          Response len           |
+ *     |-------------------------------------------------------------------|
+ *     |                                                                   |
+ *     |                  Response-type specific info                      |
+ *     |                                                                   |
+ *     |                                                                   |
+ *     |-------------------------------------------------------------------|
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: Identifies this as WDI_IPA Operation Response message
+ *     value: = 0x13
+ *   - OP_CODE
+ *     Bits 31:16
+ *     Purpose: Identifies the operation target is responding to (e.g. TX suspend)
+ *     value: = enum htt_wdi_ipa_op_code
+ *   - RSP_LEN
+ *     Bits 16:0
+ *     Purpose: length for the response-type specific info
+ *     value: = length in bytes for response-type specific info
+ *              For example, if OP_CODE == HTT_WDI_IPA_OPCODE_DBG_STATS, the
+ *              length value will be sizeof(struct wlan_wdi_ipa_dbg_stats_t).
+ */
+
+PREPACK struct htt_wdi_ipa_op_response_t
+{
+    /* DWORD 0: flags and meta-data */
+    A_UINT32
+        msg_type:   8, /* HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE */
+        reserved1:  8,
+        op_code:   16;
+    A_UINT32
+        rsp_len:   16,
+        reserved2: 16;
+} POSTPACK;
+
+#define HTT_WDI_IPA_OP_RESPONSE_SZ                    8 /* bytes */
+
+#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_M             0xffff0000
+#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_S             16
+
+#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_M             0x0000ffff
+#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_S             0
+
+#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_GET(_var) \
+    (((_var) & HTT_WDI_IPA_OP_RESPONSE_OP_CODE_M) >> HTT_WDI_IPA_OP_RESPONSE_OP_CODE_S)
+#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_OP_RESPONSE_OP_CODE, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_OP_RESPONSE_OP_CODE_S)); \
+    } while (0)
+
+#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_GET(_var) \
+    (((_var) & HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_M) >> HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_S)
+#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_WDI_IPA_OP_RESPONSE_RSP_LEN, _val);  \
+        ((_var) |= ((_val) << HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_S)); \
+    } while (0)
+
+
+enum htt_phy_mode {
+    htt_phy_mode_11a            = 0,
+    htt_phy_mode_11g            = 1,
+    htt_phy_mode_11b            = 2,
+    htt_phy_mode_11g_only       = 3,
+    htt_phy_mode_11na_ht20      = 4,
+    htt_phy_mode_11ng_ht20      = 5,
+    htt_phy_mode_11na_ht40      = 6,
+    htt_phy_mode_11ng_ht40      = 7,
+    htt_phy_mode_11ac_vht20     = 8,
+    htt_phy_mode_11ac_vht40     = 9,
+    htt_phy_mode_11ac_vht80     = 10,
+    htt_phy_mode_11ac_vht20_2g  = 11,
+    htt_phy_mode_11ac_vht40_2g  = 12,
+    htt_phy_mode_11ac_vht80_2g  = 13,
+    htt_phy_mode_11ac_vht80_80  = 14, /* 80+80 */
+    htt_phy_mode_11ac_vht160    = 15,
+
+    htt_phy_mode_max,
+};
+
+/**
+ * @brief target -> host HTT channel change indication
+ * @details
+ *  Specify when a channel change occurs.
+ *  This allows the host to precisely determine which rx frames arrived
+ *  on the old channel and which rx frames arrived on the new channel.
+ *
+ *|31                                         |7       0 |
+ *|-------------------------------------------+----------|
+ *|                  reserved                 | msg type |
+ *|------------------------------------------------------|
+ *|              primary_chan_center_freq_mhz            |
+ *|------------------------------------------------------|
+ *|            contiguous_chan1_center_freq_mhz          |
+ *|------------------------------------------------------|
+ *|            contiguous_chan2_center_freq_mhz          |
+ *|------------------------------------------------------|
+ *|                        phy_mode                      |
+ *|------------------------------------------------------|
+ *
+ * Header fields:
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a htt channel change indication message
+ *     Value: 0x15
+ *   - PRIMARY_CHAN_CENTER_FREQ_MHZ
+ *     Bits 31:0
+ *     Purpose: identify the (center of the) new 20 MHz primary channel
+ *     Value: center frequency of the 20 MHz primary channel, in MHz units
+ *   - CONTIG_CHAN1_CENTER_FREQ_MHZ
+ *     Bits 31:0
+ *     Purpose: identify the (center of the) contiguous frequency range
+ *         comprising the new channel.
+ *         For example, if the new channel is a 80 MHz channel extending
+ *         60 MHz beyond the primary channel, this field would be 30 larger
+ *         than the primary channel center frequency field.
+ *     Value: center frequency of the contiguous frequency range comprising
+ *         the full channel in MHz units
+ *         (80+80 channels also use the CONTIG_CHAN2 field)
+ *   - CONTIG_CHAN2_CENTER_FREQ_MHZ
+ *     Bits 31:0
+ *     Purpose: Identify the (center of the) 80 MHz extension frequency range
+ *         within a VHT 80+80 channel.
+ *         This field is only relevant for VHT 80+80 channels.
+ *     Value: center frequency of the 80 MHz extension channel in a VHT 80+80
+ *         channel (arbitrary value for cases besides VHT 80+80)
+ *   - PHY_MODE
+ *     Bits 31:0
+ *     Purpose: specify the PHY channel's type (legacy vs. HT vs. VHT), width,
+ *         and band
+ *     Value: htt_phy_mode enum value
+ */
+
+PREPACK struct htt_chan_change_t
+{
+    /* DWORD 0: flags and meta-data */
+    A_UINT32
+        msg_type:   8, /* HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE */
+        reserved1: 24;
+    A_UINT32 primary_chan_center_freq_mhz;
+    A_UINT32 contig_chan1_center_freq_mhz;
+    A_UINT32 contig_chan2_center_freq_mhz;
+    A_UINT32 phy_mode;
+} POSTPACK;
+
+#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_M  0xffffffff
+#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_S  0
+#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_M  0xffffffff
+#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_S  0
+#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_M  0xffffffff
+#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_S  0
+#define HTT_CHAN_CHANGE_PHY_MODE_M                      0xffffffff
+#define HTT_CHAN_CHANGE_PHY_MODE_S                      0
+
+
+#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_SET(word, value)          \
+    do {                                                                       \
+        HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ, value);\
+        (word) |= (value)  << HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_S;  \
+    } while (0)
+#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_GET(word) \
+    (((word) & HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_M) \
+     >> HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_S)
+
+#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_SET(word, value)          \
+    do {                                                                       \
+        HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ, value);\
+        (word) |= (value)  << HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_S;  \
+    } while (0)
+#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_GET(word) \
+    (((word) & HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_M) \
+     >> HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_S)
+
+#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_SET(word, value)          \
+    do {                                                                       \
+        HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ, value);\
+        (word) |= (value)  << HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_S;  \
+    } while (0)
+#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_GET(word) \
+    (((word) & HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_M) \
+     >> HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_S)
+
+#define HTT_CHAN_CHANGE_PHY_MODE_SET(word, value)          \
+    do {                                                                       \
+        HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_PHY_MODE, value);\
+        (word) |= (value)  << HTT_CHAN_CHANGE_PHY_MODE_S;  \
+    } while (0)
+#define HTT_CHAN_CHANGE_PHY_MODE_GET(word) \
+    (((word) & HTT_CHAN_CHANGE_PHY_MODE_M) \
+     >> HTT_CHAN_CHANGE_PHY_MODE_S)
+
+#define HTT_CHAN_CHANGE_BYTES sizeof(struct htt_chan_change_t)
+
+
+/**
+ * @brief rx offload packet error message
+ *
+ * @details
+ *  HTT_RX_OFLD_PKT_ERR message is sent by target to host to indicate err
+ *  of target payload like mic err.
+ *
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |      tid       |     vdev_id    |  msg_sub_type  |    msg_type    |
+ *     |-------------------------------------------------------------------|
+ *     :                    (sub-type dependent content)                   :
+ *     :- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -:
+ * Header fields:
+ *   - msg_type
+ *     Bits 7:0
+ *     Purpose: Identifies this as HTT_RX_OFLD_PKT_ERR message
+ *     value: 0x16 (HTT_T2H_MSG_TYPE_RX_OFLD_PKT_ERR)
+ *   - msg_sub_type
+ *     Bits 15:8
+ *     Purpose: Identifies which type of rx error is reported by this message
+ *     value: htt_rx_ofld_pkt_err_type
+ *   - vdev_id
+ *     Bits 23:16
+ *     Purpose: Identifies which vdev received the erroneous rx frame
+ *     value:
+ *   - tid
+ *     Bits 31:24
+ *     Purpose: Identifies the traffic type of the rx frame
+ *     value:
+ *
+ *   - The payload fields used if the sub-type == MIC error are shown below.
+ *     Note - MIC err is per MSDU, while PN is per MPDU.
+ *     The FW will discard the whole MPDU if any MSDU within the MPDU is marked
+ *     with MIC err in A-MSDU case, so FW will send only one HTT message
+ *     with the PN of this MPDU attached to indicate MIC err for one MPDU
+ *     instead of sending separate HTT messages for each wrong MSDU within
+ *     the MPDU.
+ *
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |     Rsvd       |     key_id     |             peer_id             |
+ *     |-------------------------------------------------------------------|
+ *     |                        receiver MAC addr 31:0                     |
+ *     |-------------------------------------------------------------------|
+ *     |              Rsvd               |    receiver MAC addr 47:32      |
+ *     |-------------------------------------------------------------------|
+ *     |                     transmitter MAC addr 31:0                     |
+ *     |-------------------------------------------------------------------|
+ *     |              Rsvd               |    transmitter MAC addr 47:32   |
+ *     |-------------------------------------------------------------------|
+ *     |                              PN 31:0                              |
+ *     |-------------------------------------------------------------------|
+ *     |              Rsvd               |              PN 47:32           |
+ *     |-------------------------------------------------------------------|
+ *   - peer_id
+ *     Bits 15:0
+ *     Purpose: identifies which peer is frame is from
+ *     value:
+ *   - key_id
+ *     Bits 23:16
+ *     Purpose: identifies key_id of rx frame
+ *     value:
+ *   - RA_31_0 (receiver MAC addr 31:0)
+ *     Bits 31:0
+ *     Purpose: identifies by MAC address which vdev received the frame
+ *     value: MAC address lower 4 bytes
+ *   - RA_47_32 (receiver MAC addr 47:32)
+ *     Bits 15:0
+ *     Purpose: identifies by MAC address which vdev received the frame
+ *     value: MAC address upper 2 bytes
+ *   - TA_31_0 (transmitter MAC addr 31:0)
+ *     Bits 31:0
+ *     Purpose: identifies by MAC address which peer transmitted the frame
+ *     value: MAC address lower 4 bytes
+ *   - TA_47_32 (transmitter MAC addr 47:32)
+ *     Bits 15:0
+ *     Purpose: identifies by MAC address which peer transmitted the frame
+ *     value: MAC address upper 2 bytes
+ *   - PN_31_0
+ *     Bits 31:0
+ *     Purpose: Identifies pn of rx frame
+ *     value: PN lower 4 bytes
+ *   - PN_47_32
+ *     Bits 15:0
+ *     Purpose: Identifies pn of rx frame
+ *     value:
+ *         TKIP or CCMP: PN upper 2 bytes
+ *         WAPI: PN bytes 6:5 (bytes 15:7 not included in this message)
+ */
+
+enum htt_rx_ofld_pkt_err_type {
+    HTT_RX_OFLD_PKT_ERR_TYPE_NONE = 0,
+    HTT_RX_OFLD_PKT_ERR_TYPE_MIC_ERR,
+};
+
+/* definition for HTT_RX_OFLD_PKT_ERR msg hdr */
+#define HTT_RX_OFLD_PKT_ERR_HDR_BYTES 4
+
+#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_M     0x0000ff00
+#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_S     8
+
+#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_M          0x00ff0000
+#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_S          16
+
+#define HTT_RX_OFLD_PKT_ERR_TID_M              0xff000000
+#define HTT_RX_OFLD_PKT_ERR_TID_S              24
+
+#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_M) \
+    >> HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_S)
+#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_VDEV_ID_M) >> HTT_RX_OFLD_PKT_ERR_VDEV_ID_S)
+#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_VDEV_ID, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_VDEV_ID_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_TID_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_TID_M) >> HTT_RX_OFLD_PKT_ERR_TID_S)
+#define HTT_RX_OFLD_PKT_ERR_TID_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_TID, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_TID_S)); \
+    } while (0)
+
+/* definition for HTT_RX_OFLD_PKT_ERR_MIC_ERR msg sub-type payload */
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_BYTES   28
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_M          0x0000ffff
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_S          0
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_M            0x00ff0000
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_S            16
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_M          0xffffffff
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_S          0
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_M         0x0000ffff
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_S         0
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_M          0xffffffff
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_S          0
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_M         0x0000ffff
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_S         0
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_M          0xffffffff
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_S          0
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_M         0x0000ffff
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_S         0
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_S)); \
+    } while (0)
+
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_GET(_var) \
+    (((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_M) >> \
+    HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_S)
+#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32, _val);  \
+        ((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_S)); \
+    } while (0)
+
+/**
+ * @brief peer rate report message
+ *
+ * @details
+ *  HTT_T2H_MSG_TYPE_RATE_REPORT message is sent by target to host to indicate the
+ *  justified rate of all the peers.
+ *
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |           peer_count            |                |    msg_type    |
+ *     |-------------------------------------------------------------------|
+ *     :            Payload (variant number of peer rate report)           :
+ *     :- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -:
+ * Header fields:
+ *   - msg_type
+ *     Bits 7:0
+ *     Purpose: Identifies this as HTT_T2H_MSG_TYPE_RATE_REPORT message.
+ *     value: 0x17 (HTT_T2H_MSG_TYPE_RATE_REPORT)
+ *   - reserved
+ *     Bits 15:8
+ *     Purpose:
+ *     value:
+ *   - peer_count
+ *     Bits 31:16
+ *     Purpose: Specify how many peer rate report elements are present in the payload.
+ *     value:
+ *
+  * Payload:
+ *     There are variant number of peer rate report follow the first 32 bits.
+ *     The peer rate report is defined as follows.
+ *
+ *     |31                   20|19     16|15                              0|
+ *     |-----------------------+---------+---------------------------------|-
+ *     |        reserved       |   phy   |             peer_id             | \
+ *     |-------------------------------------------------------------------|  -> report #0
+ *     |                               rate                                | /
+ *     |-----------------------+---------+---------------------------------|-
+ *     |        reserved       |   phy   |             peer_id             | \
+ *     |-------------------------------------------------------------------|  -> report #1
+ *     |                               rate                                | /
+ *     |-----------------------+---------+---------------------------------|-
+ *     |        reserved       |   phy   |             peer_id             | \
+ *     |-------------------------------------------------------------------|  -> report #2
+ *     |                               rate                                | /
+ *     |-------------------------------------------------------------------|-
+ *     :                                                                   :
+ *     :                                                                   :
+ *     :                                                                   :
+ *     :-------------------------------------------------------------------:
+ *
+ *   - peer_id
+ *     Bits 15:0
+ *     Purpose: identify the peer
+ *     value:
+ *   - phy
+ *     Bits 19:16
+ *     Purpose: identify which phy is in use
+ *     value: 0=11b, 1=11a/g, 2=11n, 3=11ac.
+ *         Please see enum htt_peer_report_phy_type for detail.
+ *   - reserved
+ *     Bits 31:20
+ *     Purpose:
+ *     value:
+ *   - rate
+ *     Bits 31:0
+ *     Purpose: represent the justified rate of the peer specified by peer_id
+ *     value:
+ */
+
+enum htt_peer_rate_report_phy_type {
+    HTT_PEER_RATE_REPORT_11B = 0,
+    HTT_PEER_RATE_REPORT_11A_G,
+    HTT_PEER_RATE_REPORT_11N,
+    HTT_PEER_RATE_REPORT_11AC,
+};
+
+#define HTT_PEER_RATE_REPORT_SIZE                8
+
+#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_M    0xffff0000
+#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_S    16
+
+#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_M       0x0000ffff
+#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_S       0
+
+#define HTT_PEER_RATE_REPORT_MSG_PHY_M           0x000f0000
+#define HTT_PEER_RATE_REPORT_MSG_PHY_S           16
+
+#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_GET(_var) \
+    (((_var) & HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_M) \
+    >> HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_S)
+#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_PEER_RATE_REPORT_MSG_PEER_COUNT, _val);  \
+        ((_var) |= ((_val) << HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_S)); \
+    } while (0)
+
+#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_GET(_var) \
+    (((_var) & HTT_PEER_RATE_REPORT_MSG_PEER_ID_M) \
+    >> HTT_PEER_RATE_REPORT_MSG_PEER_ID_S)
+#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_PEER_RATE_REPORT_MSG_PEER_ID, _val);  \
+        ((_var) |= ((_val) << HTT_PEER_RATE_REPORT_MSG_PEER_ID_S)); \
+    } while (0)
+
+#define HTT_PEER_RATE_REPORT_MSG_PHY_GET(_var) \
+    (((_var) & HTT_PEER_RATE_REPORT_MSG_PHY_M) \
+    >> HTT_PEER_RATE_REPORT_MSG_PHY_S)
+#define HTT_PEER_RATE_REPORT_MSG_PHY_SET(_var, _val) \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_PEER_RATE_REPORT_MSG_PHY, _val);  \
+        ((_var) |= ((_val) << HTT_PEER_RATE_REPORT_MSG_PHY_S)); \
+    } while (0)
+
+/**
+ * @brief HTT_T2H_MSG_TYPE_FLOW_POOL_MAP Message
+ *
+ * @details
+ *  HTT_T2H_MSG_TYPE_FLOW_POOL_MAP message is sent by the target when setting up
+ *  a flow of descriptors.
+ *
+ *  This message is in TLV format and indicates the parameters to be setup a
+ *  flow in the host. Each entry indicates that a particular flow ID is ready to
+ *  receive descriptors from a specified pool.
+ *
+ *  The message would appear as follows:
+ *
+ *         |31            24|23            16|15             8|7              0|
+ *         |----------------+----------------+----------------+----------------|
+ * header  |            reserved             |   num_flows    |     msg_type   |
+ *         |-------------------------------------------------------------------|
+ *         |                                                                   |
+ *         :                              payload                              :
+ *         |                                                                   |
+ *         |-------------------------------------------------------------------|
+ *
+ * The header field is one DWORD long and is interpreted as follows:
+ * b'0:7   - msg_type:  This will be set to HTT_T2H_MSG_TYPE_FLOW_POOL_MAP
+ * b'8-15  - num_flows: This will indicate the number of flows being setup in
+ *                      this message
+ * b'16-31 - reserved:  These bits are reserved for future use
+ *
+ * Payload:
+ * The payload would contain multiple objects of the following structure. Each
+ * object represents a flow.
+ *
+ *         |31            24|23            16|15             8|7              0|
+ *         |----------------+----------------+----------------+----------------|
+ * header  |            reserved             |   num_flows    |     msg_type   |
+ *         |-------------------------------------------------------------------|
+ * payload0|                             flow_type                             |
+ *         |-------------------------------------------------------------------|
+ *         |                              flow_id                              |
+ *         |-------------------------------------------------------------------|
+ *         |            reserved0            |          flow_pool_id           |
+ *         |-------------------------------------------------------------------|
+ *         |            reserved1            |         flow_pool_size          |
+ *         |-------------------------------------------------------------------|
+ *         |                             reserved2                             |
+ *         |-------------------------------------------------------------------|
+ * payload1|                             flow_type                             |
+ *         |-------------------------------------------------------------------|
+ *         |                              flow_id                              |
+ *         |-------------------------------------------------------------------|
+ *         |            reserved0            |          flow_pool_id           |
+ *         |-------------------------------------------------------------------|
+ *         |            reserved1            |         flow_pool_size          |
+ *         |-------------------------------------------------------------------|
+ *         |                             reserved2                             |
+ *         |-------------------------------------------------------------------|
+ *         |                                 .                                 |
+ *         |                                 .                                 |
+ *         |                                 .                                 |
+ *         |-------------------------------------------------------------------|
+ *
+ * Each payload is 5 DWORDS long and is interpreted as follows:
+ * dword0 - b'0:31  - flow_type: This indicates the type of the entity to which
+ *                               this flow is associated. It can be VDEV, peer,
+ *                               or tid (AC). Based on enum htt_flow_type.
+ *
+ * dword1 - b'0:31  - flow_id: Identifier for the flow corresponding to this
+ *                             object. For flow_type vdev it is set to the
+ *                             vdevid, for peer it is peerid and for tid, it is
+ *                             tid_num.
+ *
+ * dword2 - b'0:15  - flow_pool_id: Identifier of the descriptor-pool being used
+ *                                  in the host for this flow
+ *          b'16:31 - reserved0: This field in reserved for the future. In case
+ *                               we have a hierarchical implementation (HCM) of
+ *                               pools, it can be used to indicate the ID of the
+ *                               parent-pool.
+ *
+ * dword3 - b'0:15  - flow_pool_size: Size of the pool in number of descriptors.
+ *                                    Descriptors for this flow will be
+ *                                    allocated from this pool in the host.
+ *          b'16:31 - reserved1: This field in reserved for the future. In case
+ *                               we have a hierarchical implementation of pools,
+ *                               it can be used to indicate the max number of
+ *                               descriptors in the pool. The b'0:15 can be used
+ *                               to indicate min number of descriptors in the
+ *                               HCM scheme.
+ *
+ * dword4 - b'0:31  - reserved2: This field in reserved for the future. In case
+ *                               we have a hierarchical implementation of pools,
+ *                               b'0:15 can be used to indicate the
+ *                               priority-based borrowing (PBB) threshold of
+ *                               the flow's pool. The b'16:31 are still left
+ *                               reserved.
+ */
+
+enum htt_flow_type {
+    FLOW_TYPE_VDEV = 0,
+    /* Insert new flow types above this line */
+};
+
+PREPACK struct htt_flow_pool_map_payload_t {
+    A_UINT32 flow_type;
+    A_UINT32 flow_id;
+    A_UINT32 flow_pool_id:16,
+             reserved0:16;
+    A_UINT32 flow_pool_size:16,
+             reserved1:16;
+    A_UINT32 reserved2;
+} POSTPACK;
+
+#define HTT_FLOW_POOL_MAP_HEADER_SZ    (sizeof(A_UINT32))
+
+#define HTT_FLOW_POOL_MAP_PAYLOAD_SZ    \
+    (sizeof(struct htt_flow_pool_map_payload_t))
+
+#define HTT_FLOW_POOL_MAP_NUM_FLOWS_M                    0x0000ff00
+#define HTT_FLOW_POOL_MAP_NUM_FLOWS_S                    8
+
+#define HTT_FLOW_POOL_MAP_FLOW_TYPE_M                    0xffffffff
+#define HTT_FLOW_POOL_MAP_FLOW_TYPE_S                    0
+
+#define HTT_FLOW_POOL_MAP_FLOW_ID_M                      0xffffffff
+#define HTT_FLOW_POOL_MAP_FLOW_ID_S                      0
+
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_M                 0x0000ffff
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_S                 0
+
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_M               0x0000ffff
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_S               0
+
+#define HTT_FLOW_POOL_MAP_NUM_FLOWS_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_MAP_NUM_FLOWS_M) >> HTT_FLOW_POOL_MAP_NUM_FLOWS_S)
+
+#define HTT_FLOW_POOL_MAP_FLOW_TYPE_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_MAP_FLOW_TYPE_M) >> HTT_FLOW_POOL_MAP_FLOW_TYPE_S)
+
+#define HTT_FLOW_POOL_MAP_FLOW_ID_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_MAP_FLOW_ID_M) >> HTT_FLOW_POOL_MAP_FLOW_ID_S)
+
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_MAP_FLOW_POOL_ID_M) >> \
+            HTT_FLOW_POOL_MAP_FLOW_POOL_ID_S)
+
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_M) >> \
+            HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_S)
+
+#define HTT_FLOW_POOL_MAP_NUM_FLOWS_SET(_var, _val)            \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_NUM_FLOWS, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_MAP_NUM_FLOWS_S)); \
+    } while (0)
+
+#define HTT_FLOW_POOL_MAP_FLOW_TYPE_SET(_var, _val)            \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_TYPE, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_TYPE_S)); \
+    } while (0)
+
+#define HTT_FLOW_POOL_MAP_FLOW_ID_SET(_var, _val)            \
+    do {                                                     \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_ID, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_ID_S)); \
+    } while (0)
+
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_SET(_var, _val)            \
+    do {                                                          \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_POOL_ID, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_POOL_ID_S)); \
+    } while (0)
+
+#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_S)); \
+    } while (0)
+
+/**
+ * @brief HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP Message
+ *
+ * @details
+ *  HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP message is sent by the target when tearing
+ *  down a flow of descriptors.
+ *  This message indicates that for the flow (whose ID is provided) is wanting
+ *  to stop receiving descriptors. This flow ID corresponds to the ID of the
+ *  pool of descriptors from where descriptors are being allocated for this
+ *  flow. When a flow (and its pool) are unmapped, all the child-pools will also
+ *  be unmapped by the host.
+ *
+ *  The message would appear as follows:
+ *
+ *     |31            24|23            16|15             8|7              0|
+ *     |----------------+----------------+----------------+----------------|
+ *     |                     reserved0                    |     msg_type   |
+ *     |-------------------------------------------------------------------|
+ *     |                             flow_type                             |
+ *     |-------------------------------------------------------------------|
+ *     |                              flow_id                              |
+ *     |-------------------------------------------------------------------|
+ *     |             reserved1           |         flow_pool_id            |
+ *     |-------------------------------------------------------------------|
+ *
+ *  The message is interpreted as follows:
+ *  dword0 - b'0:7   - msg_type: This will be set to
+ *                               HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP
+ *           b'8:31  - reserved0: Reserved for future use
+ *
+ *  dword1 - b'0:31  - flow_type: This indicates the type of the entity to which
+ *                                this flow is associated. It can be VDEV, peer,
+ *                                or tid (AC). Based on enum htt_flow_type.
+ *
+ *  dword2 - b'0:31  - flow_id: Identifier for the flow corresponding to this
+ *                              object. For flow_type vdev it is set to the
+ *                              vdevid, for peer it is peerid and for tid, it is
+ *                              tid_num.
+ *
+ *  dword3 - b'0:15  - flow_pool_id: Identifier of the descriptor-pool being
+ *                                   used in the host for this flow
+ *           b'16:31 - reserved0: This field in reserved for the future.
+ *
+ */
+
+PREPACK struct htt_flow_pool_unmap_t {
+    A_UINT32 msg_type:8,
+             reserved0:24;
+    A_UINT32 flow_type;
+    A_UINT32 flow_id;
+    A_UINT32 flow_pool_id:16,
+             reserved1:16;
+} POSTPACK;
+
+#define HTT_FLOW_POOL_UNMAP_SZ  (sizeof(struct htt_flow_pool_unmap_t))
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_M         0xffffffff
+#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_S         0
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_ID_M           0xffffffff
+#define HTT_FLOW_POOL_UNMAP_FLOW_ID_S           0
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_M      0x0000ffff
+#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_S      0
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_UNMAP_FLOW_TYPE_M) >> \
+            HTT_FLOW_POOL_UNMAP_FLOW_TYPE_S)
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_ID_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_UNMAP_FLOW_ID_M) >> HTT_FLOW_POOL_UNMAP_FLOW_ID_S)
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_GET(_var)    \
+    (((_var) & HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_M) >> \
+            HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_S)
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_SET(_var, _val)            \
+    do {                                                         \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_UNMAP_FLOW_TYPE, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_UNMAP_FLOW_TYPE_S)); \
+    } while (0)
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_ID_SET(_var, _val)            \
+    do {                                                       \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_UNMAP_FLOW_ID, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_UNMAP_FLOW_ID_S)); \
+    } while (0)
+
+#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_SET(_var, _val)            \
+    do {                                                            \
+        HTT_CHECK_SET_VAL(HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID, _val);  \
+        ((_var) |= ((_val) << HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_S)); \
+    } while (0)
+
+
+/**
+ * @brief HTT_T2H_MSG_TYPE_SRING_SETUP_DONE Message
+ *
+ * @details
+ *  HTT_T2H_MSG_TYPE_SRING_SETUP_DONE message is sent by the target when
+ *  SRNG ring setup is done
+ *
+ *  This message indicates whether the last setup operation is successful.
+ *  It will be sent to host when host set respose_required bit in
+ *  HTT_H2T_MSG_TYPE_SRING_SETUP.
+ *  The message would appear as follows:
+ *
+ *     |31            24|23            16|15             8|7              0|
+ *     |--------------- +----------------+----------------+----------------|
+ *     |  setup_status  |   ring_id      |   pdev_id     |      msg_type   |
+ *     |-------------------------------------------------------------------|
+ *
+ * The message is interpreted as follows:
+ * dword0 - b'0:7   - msg_type: This will be set to
+ *                    HTT_T2H_MSG_TYPE_SRING_SETUP_DONE
+ *          b'8:15  - pdev_id:
+ *                    0 (for rings at SOC/UMAC level),
+ *                    1/2/3 mac id (for rings at LMAC level)
+ *          b'16:23 - ring_id: Identify the ring which is set up
+ *                    More details can be got from enum htt_srng_ring_id
+ *          b'24:31 - setup_status:  Indicate status of setup operation
+ *                    Refer to htt_ring_setup_status
+ */
+
+PREPACK struct htt_sring_setup_done_t {
+    A_UINT32 msg_type:      8,
+             pdev_id:       8,
+             ring_id:       8,
+             setup_status:  8;
+} POSTPACK;
+
+enum htt_ring_setup_status {
+     htt_ring_setup_status_ok = 0,
+     htt_ring_setup_status_error,
+};
+
+#define HTT_SRING_SETUP_DONE_SZ    (sizeof(struct htt_sring_setup_done_t))
+
+#define HTT_SRING_SETUP_DONE_PDEV_ID_M                  0x0000ff00
+#define HTT_SRING_SETUP_DONE_PDEV_ID_S                  8
+#define HTT_SRING_SETUP_DONE_PDEV_ID_GET(_var) \
+    (((_var) & HTT_SRING_SETUP_DONE_PDEV_ID_M) >> \
+            HTT_SRING_SETUP_DONE_PDEV_ID_S)
+#define HTT_SRING_SETUP_DONE_PDEV_ID_SET(_var, _val) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_SRING_SETUP_DONE_PDEV_ID, _val); \
+        ((_var) |= ((_val) << HTT_SRING_SETUP_DONE_PDEV_ID_S)); \
+    } while (0)
+
+#define HTT_SRING_SETUP_DONE_RING_ID_M                  0x00ff0000
+#define HTT_SRING_SETUP_DONE_RING_ID_S                  16
+#define HTT_SRING_SETUP_DONE_RING_ID_GET(_var) \
+    (((_var) & HTT_SRING_SETUP_DONE_RING_ID_M) >> \
+            HTT_SRING_SETUP_DONE_RING_ID_S)
+#define HTT_SRING_SETUP_DONE_RING_ID_SET(_var, _val) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_SRING_SETUP_DONE_RING_ID, _val); \
+        ((_var) |= ((_val) << HTT_SRING_SETUP_DONE_RING_ID_S)); \
+    } while (0)
+
+#define HTT_SRING_SETUP_DONE_STATUS_M                   0xff000000
+#define HTT_SRING_SETUP_DONE_STATUS_S                   24
+#define HTT_SRING_SETUP_DONE_STATUS_GET(_var) \
+    (((_var) & HTT_SRING_SETUP_DONE_STATUS_M) >> \
+            HTT_SRING_SETUP_DONE_STATUS_S)
+#define HTT_SRING_SETUP_DONE_STATUS_SET(_var, _val) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_SRING_SETUP_DONE_STATUS, _val); \
+        ((_var) |= ((_val) << HTT_SRING_SETUP_DONE_STATUS_S)); \
+    } while (0)
+
+
+/**
+ * @brief HTT_T2H_MSG_TYPE_MAP_FLOW_INFO Message
+ *
+ * @details
+ *  HTT TX map flow entry with tqm flow pointer
+ *  Sent from firmware to host to add tqm flow pointer in corresponding
+ *  flow search entry. Flow metadata is replayed back to host as part of this
+ *  struct to enable host to find the specific flow search entry
+ *
+ *  The message would appear as follows:
+ *
+ *     |31   28|27                 18|17     14|13       8|7              0|
+ *     |-------+------------------------------------------+----------------|
+ *     | rsvd0 |               fse_hsh_idx                |    msg_type    |
+ *     |-------------------------------------------------------------------|
+ *     |          rsvd1              |   tid   |         peer_id           |
+ *     |-------------------------------------------------------------------|
+ *     |                          tqm_flow_pntr_lo                         |
+ *     |-------------------------------------------------------------------|
+ *     |                          tqm_flow_pntr_hi                         |
+ *     |-------------------------------------------------------------------|
+ *     |                          fse_meta_data                            |
+ *     |-------------------------------------------------------------------|
+ *
+ *  The message is interpreted as follows:
+ *
+ *  dword0 - b'0:7   - msg_type: This will be set to
+ *                     HTT_T2H_MSG_TYPE_MAP_FLOW_INFO
+ *
+ *  dword0 - b'8:27  - fse_hsh_idx: Flow search table index provided by host
+ *                                  for this flow entry
+ *
+ *  dword0 - b'28:31 - rsvd0: Reserved for future use
+ *
+ *  dword1 - b'0:13  - peer_id: Software peer id given by host during association
+ *
+ *  dword1 - b'14:17 - tid
+ *
+ *  dword1 - b'18:31 - rsvd1: Reserved for future use
+ *
+ *  dword2 - b'0:31  - tqm_flow_pntr_lo: Lower 32 bits of TQM flow pointer
+ *
+ *  dword3 - b'0:31  - tqm_flow_pntr_hi: Higher 32 bits of TQM flow pointer
+ *
+ *  dword4 - b'0:31  - fse_meta_data: Replay back TX flow search metadata
+ *                     given by host
+ */
+PREPACK struct htt_tx_map_flow_info {
+    A_UINT32
+        msg_type:    8,
+        fse_hsh_idx: 20,
+        rsvd0:       4;
+    A_UINT32
+        peer_id:     14,
+        tid:         4,
+        rsvd1:       14;
+    A_UINT32 tqm_flow_pntr_lo;
+    A_UINT32 tqm_flow_pntr_hi;
+    struct htt_tx_flow_metadata fse_meta_data;
+} POSTPACK;
+
+/* DWORD 0 */
+#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_M                  0x0fffff00
+#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_S                  8
+
+/* DWORD 1 */
+#define HTT_TX_MAP_FLOW_INFO_PEER_ID_M                      0x00003fff
+#define HTT_TX_MAP_FLOW_INFO_PEER_ID_S                      0
+#define HTT_TX_MAP_FLOW_INFO_TID_M                          0x0003c000
+#define HTT_TX_MAP_FLOW_INFO_TID_S                          14
+
+/* DWORD 0 */
+#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_GET(_var) \
+    (((_var) & HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_M) >> \
+    HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_S)
+#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX, _val); \
+         ((_var) |= ((_val) << HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_S)); \
+     } while (0)
+
+/* DWORD 1 */
+#define HTT_TX_MAP_FLOW_INFO_PEER_ID_GET(_var) \
+    (((_var) & HTT_TX_MAP_FLOW_INFO_PEER_ID_M) >> \
+    HTT_TX_MAP_FLOW_INFO_PEER_ID_S)
+#define HTT_TX_MAP_FLOW_INFO_PEER_ID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MAP_FLOW_INFO_PEER_ID_IDX, _val); \
+         ((_var) |= ((_val) << HTT_TX_MAP_FLOW_INFO_PEER_ID_S)); \
+     } while (0)
+
+#define HTT_TX_MAP_FLOW_INFO_TID_GET(_var) \
+    (((_var) & HTT_TX_MAP_FLOW_INFO_TID_M) >> \
+    HTT_TX_MAP_FLOW_INFO_TID_S)
+#define HTT_TX_MAP_FLOW_INFO_TID_SET(_var, _val) \
+     do { \
+         HTT_CHECK_SET_VAL(HTT_TX_MAP_FLOW_INFO_TID_IDX, _val); \
+         ((_var) |= ((_val) << HTT_TX_MAP_FLOW_INFO_TID_S)); \
+     } while (0)
+
+#endif

fw/htt_common.h

@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2012-2015 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/**
+ * @file htt_common.h
+ *
+ * @details the public header file of HTT layer shared between host and firmware
+ */
+
+#ifndef _HTT_COMMON_H_
+#define _HTT_COMMON_H_
+
+enum htt_sec_type {
+    htt_sec_type_none,
+    htt_sec_type_wep128,
+    htt_sec_type_wep104,
+    htt_sec_type_wep40,
+    htt_sec_type_tkip,
+    htt_sec_type_tkip_nomic,
+    htt_sec_type_aes_ccmp,
+    htt_sec_type_wapi,
+    htt_sec_type_aes_ccmp_256,
+    htt_sec_type_aes_gcmp,
+    htt_sec_type_aes_gcmp_256,
+
+    /* keep this last! */
+    htt_num_sec_types
+};
+
+enum htt_rx_ind_mpdu_status {
+    HTT_RX_IND_MPDU_STATUS_UNKNOWN = 0x0,
+    HTT_RX_IND_MPDU_STATUS_OK,
+    HTT_RX_IND_MPDU_STATUS_ERR_FCS,
+    HTT_RX_IND_MPDU_STATUS_ERR_DUP,
+    HTT_RX_IND_MPDU_STATUS_ERR_REPLAY,
+    HTT_RX_IND_MPDU_STATUS_ERR_INV_PEER,
+    HTT_RX_IND_MPDU_STATUS_UNAUTH_PEER, /* only accept EAPOL frames */
+    HTT_RX_IND_MPDU_STATUS_OUT_OF_SYNC,
+    HTT_RX_IND_MPDU_STATUS_MGMT_CTRL, /* Non-data in promiscous mode */
+    HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR,
+    HTT_RX_IND_MPDU_STATUS_DECRYPT_ERR,
+    HTT_RX_IND_MPDU_STATUS_MPDU_LENGTH_ERR,
+    HTT_RX_IND_MPDU_STATUS_ENCRYPT_REQUIRED_ERR,
+    HTT_RX_IND_MPDU_STATUS_PRIVACY_ERR,
+
+    /*
+     * MISC: discard for unspecified reasons.
+     * Leave this enum value last.
+     */
+    HTT_RX_IND_MPDU_STATUS_ERR_MISC = 0xFF
+};
+
+#define HTT_INVALID_PEER    0xffff
+#define HTT_INVALID_VDEV    0xff
+
+#define HTT_NON_QOS_TID     16
+#define HTT_INVALID_TID     31
+
+#define HTT_TX_EXT_TID_DEFAULT              0
+#define HTT_TX_EXT_TID_NON_QOS_MCAST_BCAST HTT_NON_QOS_TID
+#define HTT_TX_EXT_TID_MGMT                17
+#define HTT_TX_EXT_TID_INVALID             HTT_INVALID_TID
+#define HTT_TX_EXT_TID_NONPAUSE            19
+
+
+
+#define HTT_TX_L3_CKSUM_OFFLOAD      1
+#define HTT_TX_L4_CKSUM_OFFLOAD      2
+
+
+/**
+ * @brief General specification of the tx frame contents
+ *
+ * @details
+ * For efficiency, the HTT packet type values correspond
+ * to the bit positions of the WAL packet type values, so the
+ * translation is a simple shift operation.
+ * The exception is the "mgmt" type, which specifies frame payload
+ * type rather than L2 header type.
+ */
+enum htt_pkt_type {
+    htt_pkt_type_raw = 0,
+    htt_pkt_type_native_wifi = 1,
+    htt_pkt_type_ethernet = 2,
+    htt_pkt_type_mgmt = 3,
+    htt_pkt_type_eth2 = 4,
+
+    /* keep this last */
+    htt_pkt_num_types
+};
+
+#define HTT_TX_HOST_MSDU_ID_SPACE_BEGIN 0
+#define HTT_TX_IPA_MSDU_ID_SPACE_BEGIN  3000
+#define TGT_RX2TX_MSDU_ID_SPACE_BEGIN 6000
+
+#endif /* _HTT_COMMON_H_ */

fw/targaddrs.h

@@ -0,0 +1,720 @@
+/*
+ * Copyright (c) 2012-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef __TARGADDRS_H__
+#define __TARGADDRS_H__
+
+#if defined(ATH_TARGET)
+#include "soc_addrs.h"
+#endif
+
+#if !defined(ATH_TARGET)
+#include "athstartpack.h"
+#endif
+
+/*
+ * SOC option bits, to enable/disable various features.
+ * By default, all option bits are 0.
+ * AR6004: These bits can be set in LOCAL_SCRATCH register 0.
+ * AR9888: These bits can be set in soc_core register SCRATCH_0.
+ */
+#define SOC_OPTION_BMI_DISABLE      0x01 /* Disable BMI comm with Host */
+#define SOC_OPTION_SERIAL_ENABLE    0x02 /* Enable serial port msgs */
+#define SOC_OPTION_WDT_DISABLE      0x04 /* WatchDog Timer override */
+#define SOC_OPTION_SLEEP_DISABLE    0x08 /* Disable system sleep */
+#define SOC_OPTION_STOP_BOOT        0x10 /* Stop boot processes (for ATE) */
+#define SOC_OPTION_ENABLE_NOANI     0x20 /* Operate without ANI */
+#define SOC_OPTION_DSET_DISABLE     0x40 /* Ignore DataSets */
+#define SOC_OPTION_IGNORE_FLASH     0x80 /* Ignore flash during bootup */
+
+/*
+ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
+ * host_interest structure.  It must match the address of the _host_interest
+ * symbol (see linker script).
+ *
+ * Host Interest is shared between Host and Target in order to coordinate
+ * between the two, and is intended to remain constant (with additions only
+ * at the end) across software releases.
+ *
+ * All addresses are available here so that it's possible to
+ * write a single binary that works with all Target Types.
+ * May be used in assembler code as well as C.
+ */
+#define AR6002_HOST_INTEREST_ADDRESS    0x00500400
+#define AR6003_HOST_INTEREST_ADDRESS    0x00540600
+#define AR6004_HOST_INTEREST_ADDRESS    0x00400800
+#define AR9888_HOST_INTEREST_ADDRESS    0x00400800
+#define AR900B_HOST_INTEREST_ADDRESS    0x00400800
+#define AR6320_HOST_INTEREST_ADDRESS    0x00400800
+#define QCA9377_HOST_INTEREST_ADDRESS   0x00400800
+#define AR6004_SOC_RESET_ADDRESS        0X00004000
+#define AR6004_SOC_RESET_CPU_INIT_RESET_MASK        0X00000800
+#if defined(AR6006_MEMORY_NEW_ARCH)
+#define AR6006_HOST_INTEREST_ADDRESS                0x00428800
+#else
+#define AR6006_HOST_INTEREST_ADDRESS                0x00400800
+#endif
+#define AR6006_SOC_RESET_ADDRESS                    0X00004000
+#define AR6006_SOC_RESET_CPU_INIT_RESET_MASK        0X00000800
+#define QCA9984_HOST_INTEREST_ADDRESS               0x00400800
+#define IPQ4019_HOST_INTEREST_ADDRESS               0x00400800
+#define QCA9888_HOST_INTEREST_ADDRESS               0x00400800
+
+
+#define HOST_INTEREST_MAX_SIZE          0x200
+
+#if !defined(__ASSEMBLER__)
+struct register_dump_s;
+struct dbglog_hdr_s;
+
+/*
+ * These are items that the Host may need to access
+ * via BMI or via the Diagnostic Window. The position
+ * of items in this structure must remain constant
+ * across firmware revisions!
+ *
+ * Types for each item must be fixed size across
+ * target and host platforms.
+ *
+ * More items may be added at the end.
+ */
+PREPACK64 struct host_interest_s {
+    /*
+     * Pointer to application-defined area, if any.
+     * Set by Target application during startup.
+     */
+    A_UINT32               hi_app_host_interest;                      /* 0x00 */
+
+    /* Pointer to register dump area, valid after Target crash. */
+    A_UINT32               hi_failure_state;                          /* 0x04 */
+
+    /* Pointer to debug logging header */
+    A_UINT32               hi_dbglog_hdr;                             /* 0x08 */
+
+    /* Save SW ROM version */
+    A_UINT32               hi_sw_rom_version;                         /* 0x0c */
+
+    /*
+     * General-purpose flag bits, similar to SOC_OPTION_* flags.
+     * Can be used by application rather than by OS.
+     */
+    volatile A_UINT32      hi_option_flag;                            /* 0x10 */
+
+    /*
+     * Boolean that determines whether or not to
+     * display messages on the serial port.
+     */
+    A_UINT32               hi_serial_enable;                          /* 0x14 */
+
+    /* Start address of DataSet index, if any */
+    A_UINT32               hi_dset_list_head;                         /* 0x18 */
+
+    /* Override Target application start address */
+    A_UINT32               hi_app_start;                              /* 0x1c */
+
+    /* Clock and voltage tuning */
+    A_UINT32               hi_skip_clock_init;                        /* 0x20 */
+    A_UINT32               hi_core_clock_setting;                     /* 0x24 */
+    A_UINT32               hi_cpu_clock_setting;                      /* 0x28 */
+    A_UINT32               hi_system_sleep_setting;                   /* 0x2c */
+    A_UINT32               hi_xtal_control_setting;                   /* 0x30 */
+    A_UINT32               hi_pll_ctrl_setting_24ghz;                 /* 0x34 */
+    A_UINT32               hi_pll_ctrl_setting_5ghz;                  /* 0x38 */
+    A_UINT32               hi_ref_voltage_trim_setting;               /* 0x3c */
+    A_UINT32               hi_clock_info;                             /* 0x40 */
+
+    /* Host uses BE CPU or not */
+    A_UINT32               hi_be;                                     /* 0x44 */
+
+    A_UINT32               hi_stack;  /* normal stack */              /* 0x48 */
+    A_UINT32               hi_err_stack; /* error stack */            /* 0x4c */
+    A_UINT32               hi_desired_cpu_speed_hz;                   /* 0x50 */
+
+    /* Pointer to Board Data  */
+    A_UINT32               hi_board_data;                             /* 0x54 */
+
+    /*
+     * Indication of Board Data state:
+     *    0: board data is not yet initialized.
+     *    1: board data is initialized; unknown size
+     *   >1: number of bytes of initialized board data (varies with board type)
+     */
+    A_UINT32               hi_board_data_initialized;                 /* 0x58 */
+
+    A_UINT32               hi_dset_RAM_index_table;                   /* 0x5c */
+
+    A_UINT32               hi_desired_baud_rate;                      /* 0x60 */
+    A_UINT32               hi_dbglog_config;                          /* 0x64 */
+    A_UINT32               hi_end_RAM_reserve_sz;                     /* 0x68 */
+    A_UINT32               hi_mbox_io_block_sz;                       /* 0x6c */
+
+    A_UINT32               hi_num_bpatch_streams;                     /* 0x70 -- unused */
+    A_UINT32               hi_mbox_isr_yield_limit;                   /* 0x74 */
+
+    A_UINT32               hi_refclk_hz;                              /* 0x78 */
+    A_UINT32               hi_ext_clk_detected;                       /* 0x7c */
+    A_UINT32               hi_dbg_uart_txpin;                         /* 0x80 */
+    A_UINT32               hi_dbg_uart_rxpin;                         /* 0x84 */
+    A_UINT32               hi_hci_uart_baud;                          /* 0x88 */
+    A_UINT32               hi_hci_uart_pin_assignments;               /* 0x8C */
+        /* NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts pin */
+    A_UINT32               hi_hci_uart_baud_scale_val;                /* 0x90 */
+    A_UINT32               hi_hci_uart_baud_step_val;                 /* 0x94 */
+
+    A_UINT32               hi_allocram_start;                         /* 0x98 */
+    A_UINT32               hi_allocram_sz;                            /* 0x9c */
+    A_UINT32               hi_hci_bridge_flags;                       /* 0xa0 */
+    A_UINT32               hi_hci_uart_support_pins;                  /* 0xa4 */
+        /* NOTE: byte [0] = RESET pin (bit 7 is polarity), bytes[1]..bytes[3] are for future use */
+    A_UINT32               hi_hci_uart_pwr_mgmt_params;               /* 0xa8 */
+        /* 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high
+         *        [31:16]: wakeup timeout in ms
+         */
+    /* Pointer to extended board Data  */
+    A_UINT32               hi_board_ext_data;                         /* 0xac */
+    A_UINT32               hi_board_ext_data_config;                  /* 0xb0 */
+        /*
+         * Bit [0]  :   valid
+         * Bit[31:16:   size
+         */
+   /*
+     * hi_reset_flag is used to do some stuff when target reset.
+     * such as restore app_start after warm reset or
+     * preserve host Interest area, or preserve ROM data, literals etc.
+     */
+    A_UINT32                hi_reset_flag;                            /* 0xb4 */
+    /* indicate hi_reset_flag is valid */
+    A_UINT32                hi_reset_flag_valid;                      /* 0xb8 */
+    A_UINT32               hi_hci_uart_pwr_mgmt_params_ext;           /* 0xbc */
+        /* 0xbc - [31:0]: idle timeout in ms
+         */
+        /* ACS flags */
+    A_UINT32               hi_acs_flags;                              /* 0xc0 */
+    A_UINT32               hi_console_flags;                          /* 0xc4 */
+    A_UINT32               hi_nvram_state;                            /* 0xc8 */
+    volatile A_UINT32      hi_option_flag2;                           /* 0xcc */
+
+    /* If non-zero, override values sent to Host in WMI_READY event. */
+    A_UINT32               hi_sw_version_override;                    /* 0xd0 */
+    A_UINT32               hi_abi_version_override;                   /* 0xd4 */
+
+    /* Percentage of high priority RX traffic to total expected RX traffic -
+     * applicable only to ar6004 */
+    A_UINT32               hi_hp_rx_traffic_ratio;                    /* 0xd8 */
+
+    /* test applications flags */
+    A_UINT32               hi_test_apps_related    ;                  /* 0xdc */
+    /* location of test script */
+    A_UINT32               hi_ota_testscript;                         /* 0xe0 */
+    /* location of CAL data */
+    A_UINT32               hi_cal_data;                               /* 0xe4 */
+
+    /* Number of packet log buffers */
+    volatile A_UINT32      hi_pktlog_num_buffers;                     /* 0xe8 */
+
+    /* wow extension configuration */
+    A_UINT32               hi_wow_ext_config;                         /* 0xec */
+    A_UINT32               hi_pwr_save_flags;                         /* 0xf0 */
+
+    /* Spatial Multiplexing Power Save (SMPS) options */
+    A_UINT32               hi_smps_options;                           /* 0xf4 */
+
+    /* Interconnect-specific state */
+    A_UINT32               hi_interconnect_state;                     /* 0xf8 */
+
+    /* Coex configuration flags */
+    A_UINT32               hi_coex_config;                           /* 0xfc */
+
+    /* Early allocation support */
+    A_UINT32               hi_early_alloc;                            /* 0x100 */
+
+    /* FW swap field */
+    /* Bits of this 32bit word will be used to pass specific swap
+        instruction to FW */
+    /* Bit 0 -- AP Nart descriptor no swap. When this bit is set
+            FW will not swap TX descriptor. Meaning packets are formed
+            on the target processor.*/
+    /* Bit 1 -- TBD */
+
+    A_UINT32               hi_fw_swap;                               /* 0x104 */
+
+    /* global arenas pointer address, used by host driver debug */
+    A_UINT32               hi_dynamic_mem_arenas_addr;              /* 0x108 */
+
+    /* allocated bytes of DRAM use by allocated */
+    A_UINT32               hi_dynamic_mem_allocated;                /* 0x10C */
+
+    /* remaining bytes of DRAM */
+    A_UINT32               hi_dynamic_mem_remaining;                /* 0x110 */
+
+    /* memory track count, configured by host */
+    A_UINT32               hi_dynamic_mem_track_max;                /* 0x114 */
+
+    /* minidump buffer */
+    A_UINT32               hi_minidump;                             /* 0x118 */
+
+    /* bdata's sig and key addr */
+    A_UINT32               hi_bd_sig_key;                           /* 0x11c */
+
+} POSTPACK64;
+
+/* bitmap for hi_test_apps_related */
+#define HI_TEST_APPS_TESTSCRIPT_LOADED   0x00000001
+#define HI_TEST_APPS_CAL_DATA_AVAIL      0x00000002
+
+/* Bits defined in hi_option_flag */
+#define HI_OPTION_TIMER_WAR         0x01 /* Enable timer workaround */
+#define HI_OPTION_BMI_CRED_LIMIT    0x02 /* Limit BMI command credits */
+#define HI_OPTION_RELAY_DOT11_HDR   0x04 /* Relay Dot11 hdr to/from host */
+#define HI_OPTION_MAC_ADDR_METHOD   0x08 /* MAC addr method 0-locally administred 1-globally unique addrs */
+#define HI_OPTION_FW_BRIDGE         0x10 /* Firmware Bridging */
+#define HI_OPTION_ENABLE_PROFILE    0x20 /* Enable CPU profiling */
+#define HI_OPTION_DISABLE_DBGLOG    0x40 /* Disable debug logging */
+#define HI_OPTION_SKIP_ERA_TRACKING 0x80 /* Skip Era Tracking */
+#define HI_OPTION_PAPRD_DISABLE     0x100 /* Disable PAPRD (debug) */
+#define HI_OPTION_NUM_DEV_LSB       0x200
+#define HI_OPTION_NUM_DEV_MSB       0x800
+#define HI_OPTION_DEV_MODE_LSB      0x1000
+#define HI_OPTION_DEV_MODE_MSB      0x8000000
+#define HI_OPTION_NO_LFT_STBL       0x10000000 /* Disable LowFreq Timer Stabilization */
+#define HI_OPTION_SKIP_REG_SCAN     0x20000000 /* Skip regulatory scan */
+#define HI_OPTION_INIT_REG_SCAN     0x40000000 /* Do regulatory scan during init before
+                                                * sending WMI ready event to host */
+#define HI_OPTION_SKIP_MEMMAP       0x80000000 /* REV6: Do not adjust memory map */
+
+#define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3
+
+/* 2 bits of hi_option_flag are used to represent 3 modes */
+#define HI_OPTION_FW_MODE_IBSS    0x0 /* IBSS Mode */
+#define HI_OPTION_FW_MODE_BSS_STA 0x1 /* STA Mode */
+#define HI_OPTION_FW_MODE_AP      0x2 /* AP Mode */
+#define HI_OPTION_FW_MODE_BT30AMP 0x3 /* BT30 AMP Mode */
+
+/* 2 bits of hi_option flag are usedto represent 4 submodes */
+#define HI_OPTION_FW_SUBMODE_NONE    0x0  /* Normal mode */
+#define HI_OPTION_FW_SUBMODE_P2PDEV  0x1  /* p2p device mode */
+#define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 /* p2p client mode */
+#define HI_OPTION_FW_SUBMODE_P2PGO   0x3 /* p2p go mode */
+
+/* Num dev Mask */
+#define HI_OPTION_NUM_DEV_MASK    0x7
+#define HI_OPTION_NUM_DEV_SHIFT   0x9
+
+/* firmware bridging */
+#define HI_OPTION_FW_BRIDGE_SHIFT 0x04
+
+/* Fw Mode/SubMode Mask
+|-------------------------------------------------------------------------------|
+|   SUB   |   SUB   |   SUB   |  SUB    |         |         |         |         |
+| MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0] |
+|   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |
+|-------------------------------------------------------------------------------|
+*/
+#define HI_OPTION_FW_MODE_BITS         0x2
+#define HI_OPTION_FW_MODE_MASK         0x3
+#define HI_OPTION_FW_MODE_SHIFT        0xC
+#define HI_OPTION_ALL_FW_MODE_MASK     0xFF
+
+#define HI_OPTION_FW_SUBMODE_BITS      0x2
+#define HI_OPTION_FW_SUBMODE_MASK      0x3
+#define HI_OPTION_FW_SUBMODE_SHIFT     0x14
+#define HI_OPTION_ALL_FW_SUBMODE_MASK  0xFF00
+#define HI_OPTION_ALL_FW_SUBMODE_SHIFT 0x8
+
+
+/* hi_option_flag2 options */
+#define HI_OPTION_OFFLOAD_AMSDU     0x01
+#define HI_OPTION_DFS_SUPPORT       0x02 /* Enable DFS support */
+#define HI_OPTION_ENABLE_RFKILL     0x04 /* RFKill Enable Feature*/
+#define HI_OPTION_RADIO_RETENTION_DISABLE     0x08 /* Disable radio retention */
+#define HI_OPTION_EARLY_CFG_DONE    0x10 /* Early configuration is complete */
+
+#define HI_OPTION_RF_KILL_SHIFT     0x2
+#define HI_OPTION_RF_KILL_MASK      0x1
+
+#define HI_OPTION_HTT_TGT_DEBUG_TX_COMPL_IDX 0x20
+
+#define HTT_TGT_DEBUG_TX_COMPL_IDX_VALUE()    \
+        ((HOST_INTEREST->hi_option_flag2 & HI_OPTION_HTT_TGT_DEBUG_TX_COMPL_IDX))
+
+/* AR9888 1.0 only. Enable/disable CDC max perf support from host */
+#define HI_OPTION_DISABLE_CDC_MAX_PERF_WAR  0x20
+#define CDC_MAX_PERF_WAR_ENABLED()    \
+        (!(HOST_INTEREST->hi_option_flag2 & HI_OPTION_DISABLE_CDC_MAX_PERF_WAR))
+#define HI_OPTION_USE_EXT_LDO       0x40 /* use LDO27 for 1.1V instead of PMU. */
+#define HI_OPTION_DBUART_SUPPORT    0x80 /* Enable uart debug support */
+#define HI_OPTION_BE_LATENCY_OPTIMIZE    0x100 /* This bit is to enable BE low latency for some customers. The side effect is TCP DL will be 8Mbps decreased (673Mbps -> 665Mbps).*/
+#define HT_OPTION_GPIO_WAKEUP_SUPPORT    0x200 /* GPIO wake up support */
+
+#define GPIO_WAKEUP_ENABLED() \
+    (HOST_INTEREST->hi_option_flag2 & HT_OPTION_GPIO_WAKEUP_SUPPORT)
+
+
+/* hi_reset_flag */
+#define HI_RESET_FLAG_PRESERVE_APP_START         0x01  /* preserve App Start address */
+#define HI_RESET_FLAG_PRESERVE_HOST_INTEREST     0x02  /* preserve host interest */
+#define HI_RESET_FLAG_PRESERVE_ROMDATA           0x04  /* preserve ROM data */
+#define HI_RESET_FLAG_PRESERVE_NVRAM_STATE       0x08
+#define HI_RESET_FLAG_PRESERVE_BOOT_INFO         0x10
+#define HI_RESET_FLAG_WARM_RESET	0x20
+
+/* define hi_fw_swap bits */
+#define HI_DESC_IN_FW_BIT       0x01
+
+#define HI_RESET_FLAG_IS_VALID  0x12345678  /* indicate the reset flag is valid */
+
+#define ON_RESET_FLAGS_VALID() \
+        (HOST_INTEREST->hi_reset_flag_valid == HI_RESET_FLAG_IS_VALID)
+
+#define RESET_FLAGS_VALIDATE()  \
+        (HOST_INTEREST->hi_reset_flag_valid = HI_RESET_FLAG_IS_VALID)
+
+#define RESET_FLAGS_INVALIDATE() \
+        (HOST_INTEREST->hi_reset_flag_valid = 0)
+
+#define ON_RESET_PRESERVE_APP_START() \
+        (HOST_INTEREST->hi_reset_flag & HI_RESET_FLAG_PRESERVE_APP_START)
+
+#define ON_RESET_PRESERVE_NVRAM_STATE() \
+        (HOST_INTEREST->hi_reset_flag & HI_RESET_FLAG_PRESERVE_NVRAM_STATE)
+
+#define ON_RESET_PRESERVE_HOST_INTEREST() \
+        (HOST_INTEREST->hi_reset_flag & HI_RESET_FLAG_PRESERVE_HOST_INTEREST)
+
+#define ON_RESET_PRESERVE_ROMDATA() \
+        (HOST_INTEREST->hi_reset_flag & HI_RESET_FLAG_PRESERVE_ROMDATA)
+
+#define ON_RESET_PRESERVE_BOOT_INFO() \
+        (HOST_INTEREST->hi_reset_flag & HI_RESET_FLAG_PRESERVE_BOOT_INFO)
+
+#define ON_RESET_WARM_RESET() \
+        (HOST_INTEREST->hi_reset_flag & HI_RESET_FLAG_WARM_RESET)
+
+/* host CPU endianness */
+#define HOST_ON_BE_CPU() \
+        (HOST_INTEREST->hi_be)
+
+/* AP nart no swap descriptor flag. Decsriptors are created on the target processor. */
+#define DESC_IN_FW() \
+        (HOST_INTEREST->hi_fw_swap & HI_DESC_IN_FW_BIT)
+
+
+/* redefine for hi_acs_flags since no product ever use it
+ * NOTE:
+ *     This flag was only used in AR6004 for a customer project that has
+ *     been canceled, we are reusing it to avoid extending the Host interest
+ *     area.
+ * BIT Range  Meaning
+ * --------- ----------------------------------
+ *     0      HOST wants to swap MBOX usage
+ *     1      HOST supports HTT reduced tx completion
+ *     2      HOST supports HTT alternate credit size for data frames
+ *   15..3    reserved for HOST
+ *    16      FW set it before sending HTC_Ready to HOST to indicate MBOX swap is done
+ *    17      same as above but to indicate HTT reduced tx completion capability
+ *  31..18    reserved for FW
+ */
+#define HI_ACS_FLAGS_HOST_SWAP_MBOX     (1 << 0)   /* HOST require to swap MBOX */
+#define HI_ACS_FLAGS_HOST_REDUCE_TX_COMPL (1 << 1) /* HOST supports HTT reduced tx completion */
+#define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE (1 << 2) /* HOST supports alternate credit size for data frames */
+#define HI_ACS_FLAGS_FW_SWAPPED_MBOX    (1 << 16)  /* FW swapped MBOX */
+#define HI_ACS_FLAGS_FW_REDUCE_TX_COMPL (1 << 17)  /* FW support HTT reduced tx completion */
+
+/* CONSOLE FLAGS
+ *
+ * Bit Range  Meaning
+ * ---------  --------------------------------
+ *   2..0     UART ID (0 = Default)
+ *    3       Baud Select (0 = 9600, 1 = 115200)
+ *   30..4    Reserved
+ *    31      Enable Console
+ *
+ * */
+
+#define HI_CONSOLE_FLAGS_ENABLE       (1 << 31)
+#define HI_CONSOLE_FLAGS_UART_MASK    (0x7)
+#define HI_CONSOLE_FLAGS_UART_SHIFT   0
+#define HI_CONSOLE_FLAGS_BAUD_SELECT  (1 << 3)
+
+/* SM power save options */
+#define HI_SMPS_ALLOW_MASK            (0x00000001)
+#define HI_SMPS_MODE_MASK             (0x00000002)
+#define HI_SMPS_MODE_STATIC           (0x00000000)
+#define HI_SMPS_MODE_DYNAMIC          (0x00000002)
+#define HI_SMPS_DISABLE_AUTO_MODE     (0x00000004)
+#define HI_SMPS_DATA_THRESH_MASK      (0x000007f8)
+#define HI_SMPS_DATA_THRESH_SHIFT     (3)
+#define HI_SMPS_RSSI_THRESH_MASK      (0x0007f800)
+#define HI_SMPS_RSSI_THRESH_SHIFT     (11)
+#define HI_SMPS_LOWPWR_CM_MASK        (0x00380000)
+#define HI_SMPS_LOWPWR_CM_SHIFT       (15)
+#define HI_SMPS_HIPWR_CM_MASK         (0x03c00000)
+#define HI_SMPS_HIPWR_CM_SHIFT        (19)
+
+#define HOST_INTEREST_SMPS_GET_MODE()     (HOST_INTEREST->hi_smps_options & HI_SMPS_MODE_MASK)
+#define HOST_INTEREST_SMPS_GET_DATA_THRESH() ((HOST_INTEREST->hi_smps_options & HI_SMPS_DATA_THRESH_MASK) >> HI_SMPS_DATA_THRESH_SHIFT)
+#define HOST_INTEREST_SMPS_SET_DATA_THRESH(x) (((x) << HI_SMPS_DATA_THRESH_SHIFT) & HI_SMPS_DATA_THRESH_MASK)
+#define HOST_INTEREST_SMPS_GET_RSSI_THRESH() ((HOST_INTEREST->hi_smps_options & HI_SMPS_RSSI_THRESH_MASK) >> HI_SMPS_RSSI_THRESH_SHIFT)
+#define HOST_INTEREST_SMPS_SET_RSSI_THRESH(x) (((x) << HI_SMPS_RSSI_THRESH_SHIFT) & HI_SMPS_RSSI_THRESH_MASK)
+#define HOST_INTEREST_SMPS_SET_LOWPWR_CM()   ((HOST_INTEREST->hi_smps_options & HI_SMPS_LOWPWR_CM_MASK) >> HI_SMPS_LOWPWR_CM_SHIFT)
+#define HOST_INTEREST_SMPS_SET_HIPWR_CM() ((HOST_INTEREST->hi_smps_options << HI_SMPS_HIPWR_CM_MASK) & HI_SMPS_HIPWR_CM_SHIFT)
+#define HOST_INTEREST_SMPS_IS_AUTO_MODE_DISABLED() (HOST_INTEREST->hi_smps_options & HI_SMPS_DISABLE_AUTO_MODE)
+
+
+/* WOW Extension configuration
+ *
+ * Bit Range  Meaning
+ * ---------  --------------------------------
+ *   8..0     Size of each WOW pattern (max 511)
+ *   15..9    Number of patterns per list (max 127)
+ *   17..16   Number of lists (max 4)
+ *   30..18   Reserved
+ *   31       Enabled
+ *
+ *  set values (except enable) to zeros for default settings
+ *
+ * */
+
+#define HI_WOW_EXT_ENABLED_MASK        (1 << 31)
+#define HI_WOW_EXT_NUM_LIST_SHIFT      16
+#define HI_WOW_EXT_NUM_LIST_MASK       (0x3 << HI_WOW_EXT_NUM_LIST_SHIFT)
+#define HI_WOW_EXT_NUM_PATTERNS_SHIFT  9
+#define HI_WOW_EXT_NUM_PATTERNS_MASK   (0x7F << HI_WOW_EXT_NUM_PATTERNS_SHIFT)
+#define HI_WOW_EXT_PATTERN_SIZE_SHIFT  0
+#define HI_WOW_EXT_PATTERN_SIZE_MASK   (0x1FF << HI_WOW_EXT_PATTERN_SIZE_SHIFT)
+
+#define HI_WOW_EXT_MAKE_CONFIG(num_lists,count,size) \
+    ((((num_lists) << HI_WOW_EXT_NUM_LIST_SHIFT) & HI_WOW_EXT_NUM_LIST_MASK)     | \
+    (((count) << HI_WOW_EXT_NUM_PATTERNS_SHIFT) & HI_WOW_EXT_NUM_PATTERNS_MASK)  | \
+    (((size) << HI_WOW_EXT_PATTERN_SIZE_SHIFT) & HI_WOW_EXT_PATTERN_SIZE_MASK))
+
+#define HI_WOW_EXT_GET_NUM_LISTS(config)     \
+                        (((config) & HI_WOW_EXT_NUM_LIST_MASK) >> HI_WOW_EXT_NUM_LIST_SHIFT)
+#define HI_WOW_EXT_GET_NUM_PATTERNS(config)  \
+                        (((config) & HI_WOW_EXT_NUM_PATTERNS_MASK) >> HI_WOW_EXT_NUM_PATTERNS_SHIFT)
+#define HI_WOW_EXT_GET_PATTERN_SIZE(config)  \
+                        (((config) & HI_WOW_EXT_PATTERN_SIZE_MASK) >> HI_WOW_EXT_PATTERN_SIZE_SHIFT)
+
+/*
+ * Early allocation configuration
+ * Support RAM bank configuration before BMI done and this eases the memory
+ * allocation at very early stage
+ * Bit Range  Meaning
+ * ---------  ----------------------------------
+ * [0:3]      number of bank assigned to be IRAM
+ * [4:15]     reserved
+ * [16:31]    magic number
+ *
+ * Note:
+ * 1. target firmware would check magic number and if it's a match, firmware
+ *    would consider the bits[0:15] are valid and base on that to calculate
+ *    the end of DRAM. Early allocation would be located at that area and
+ *    may be reclaimed when necesary
+ * 2. if no magic number is found, early allocation would happen at "_end"
+ *    symbol of ROM which is located before the app-data and might NOT be
+ *    re-claimable. If this is adopted, link script should keep this in
+ *    mind to avoid data corruption.
+ */
+#define HI_EARLY_ALLOC_MAGIC                   0x6d8a
+#define HI_EARLY_ALLOC_MAGIC_MASK              0xffff0000
+#define HI_EARLY_ALLOC_MAGIC_SHIFT             16
+#define HI_EARLY_ALLOC_IRAM_BANKS_MASK         0x0000000f
+#define HI_EARLY_ALLOC_IRAM_BANKS_SHIFT        0
+
+#define HI_EARLY_ALLOC_VALID() \
+               ((((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_MAGIC_MASK) >> HI_EARLY_ALLOC_MAGIC_SHIFT) \
+                               == (HI_EARLY_ALLOC_MAGIC))
+#define HI_EARLY_ALLOC_GET_IRAM_BANKS() \
+               (((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_IRAM_BANKS_MASK) >> HI_EARLY_ALLOC_IRAM_BANKS_SHIFT)
+
+/*
+ * Intended for use by Host software, this macro returns the Target RAM
+ * address of any item in the host_interest structure.
+ * Example: target_addr = AR6002_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
+ */
+#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
+    (A_UINT32)((size_t)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR6003_HOST_INTEREST_ITEM_ADDRESS(item) \
+    (A_UINT32)((size_t)&((((struct host_interest_s *)(AR6003_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR6004_HOST_INTEREST_ITEM_ADDRESS(item) \
+    (A_UINT32)((size_t)&((((struct host_interest_s *)(AR6004_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR6006_HOST_INTEREST_ITEM_ADDRESS(item) \
+    (A_UINT32)((size_t)&((((struct host_interest_s *)(AR6006_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR9888_HOST_INTEREST_ITEM_ADDRESS(item) \
+    (A_UINT32)((size_t)&((((struct host_interest_s *)(AR9888_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR6320_HOST_INTEREST_ITEM_ADDRESS(item) \
+    (A_UINT32)((size_t)&((((struct host_interest_s *)(AR6320_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR900B_HOST_INTEREST_ITEM_ADDRESS(item) \
+    (A_UINT32)((size_t)&((((struct host_interest_s *)(AR900B_HOST_INTEREST_ADDRESS))->item)))
+
+#define HOST_INTEREST_DBGLOG_IS_ENABLED() \
+        (!(HOST_INTEREST->hi_option_flag & HI_OPTION_DISABLE_DBGLOG))
+
+#define HOST_INTEREST_PKTLOG_IS_ENABLED() \
+        ((HOST_INTEREST->hi_pktlog_num_buffers))
+
+#define HOST_INTEREST_PROFILE_IS_ENABLED() \
+        (HOST_INTEREST->hi_option_flag & HI_OPTION_ENABLE_PROFILE)
+
+#define LF_TIMER_STABILIZATION_IS_ENABLED() \
+        (!(HOST_INTEREST->hi_option_flag & HI_OPTION_NO_LFT_STBL))
+
+#define IS_AMSDU_OFFLAOD_ENABLED() \
+        ((HOST_INTEREST->hi_option_flag2 & HI_OPTION_OFFLOAD_AMSDU))
+
+#define HOST_INTEREST_DFS_IS_ENABLED() \
+        ((HOST_INTEREST->hi_option_flag2 & HI_OPTION_DFS_SUPPORT))
+
+#define HOST_INTEREST_EARLY_CFG_DONE() \
+        ((HOST_INTEREST->hi_option_flag2 & HI_OPTION_EARLY_CFG_DONE))
+
+/*power save flag bit definitions*/
+#define HI_PWR_SAVE_LPL_ENABLED   0x1
+/*b1-b3 reserved*/
+/*b4-b5 : dev0 LPL type : 0 - none
+                          1- Reduce Pwr Search
+                          2- Reduce Pwr Listen*/
+/*b6-b7 : dev1 LPL type and so on for Max 8 devices*/
+#define HI_PWR_SAVE_LPL_DEV0_LSB   4
+#define HI_PWR_SAVE_LPL_DEV_MASK   0x3
+/*power save related utility macros*/
+#define HI_LPL_ENABLED() \
+        ((HOST_INTEREST->hi_pwr_save_flags & HI_PWR_SAVE_LPL_ENABLED))
+#define HI_DEV_LPL_TYPE_GET(_devix)   \
+        (HOST_INTEREST->hi_pwr_save_flags & \
+          ((HI_PWR_SAVE_LPL_DEV_MASK) << \
+           (HI_PWR_SAVE_LPL_DEV0_LSB + \
+            (_devix)*2)))
+
+#define HOST_INTEREST_SMPS_IS_ALLOWED() \
+        ((HOST_INTEREST->hi_smps_options & HI_SMPS_ALLOW_MASK))
+
+/* Convert a Target virtual address into a Target physical address */
+#define AR6002_VTOP(vaddr) ((vaddr) & 0x001fffff)
+#define AR6003_VTOP(vaddr) ((vaddr) & 0x001fffff)
+#define AR6004_VTOP(vaddr) (vaddr)
+#define AR6006_VTOP(vaddr) (vaddr)
+#define AR9888_VTOP(vaddr) (vaddr)
+#define AR6320_VTOP(vaddr) (vaddr)
+#define AR900B_VTOP(vaddr) (vaddr)
+#define TARG_VTOP(TargetType, vaddr) \
+        (((TargetType) == TARGET_TYPE_AR6002) ? AR6002_VTOP(vaddr) : \
+        (((TargetType) == TARGET_TYPE_AR6003) ? AR6003_VTOP(vaddr) : \
+        (((TargetType) == TARGET_TYPE_AR6004) ? AR6004_VTOP(vaddr) : \
+        (((TargetType) == TARGET_TYPE_AR6006) ? AR6006_VTOP(vaddr) : \
+        (((TargetType) == TARGET_TYPE_AR9888) ? AR9888_VTOP(vaddr) : \
+        (((TargetType) == TARGET_TYPE_AR6320) ? AR6320_VTOP(vaddr) : \
+        (((TargetType) == TARGET_TYPE_AR900B) ? AR900B_VTOP(vaddr) : \
+           0)))))))
+
+#define HOST_INTEREST_ITEM_ADDRESS(TargetType, item) \
+        (((TargetType) == TARGET_TYPE_AR6002) ? AR6002_HOST_INTEREST_ITEM_ADDRESS(item) : \
+        (((TargetType) == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : \
+        (((TargetType) == TARGET_TYPE_AR6004) ? AR6004_HOST_INTEREST_ITEM_ADDRESS(item) : \
+        (((TargetType) == TARGET_TYPE_AR6006) ? AR6006_HOST_INTEREST_ITEM_ADDRESS(item) : \
+        (((TargetType) == TARGET_TYPE_AR9888) ? AR9888_HOST_INTEREST_ITEM_ADDRESS(item) : \
+        (((TargetType) == TARGET_TYPE_AR6320) ? AR6320_HOST_INTEREST_ITEM_ADDRESS(item) : \
+        (((TargetType) == TARGET_TYPE_AR900B) ? AR900B_HOST_INTEREST_ITEM_ADDRESS(item) : \
+           0)))))))
+
+#define AR6002_BOARD_DATA_SZ 768
+#define AR6002_BOARD_EXT_DATA_SZ 0
+#define AR6003_BOARD_DATA_SZ 1024
+/* Reserve 1024 bytes for extended board data */
+#if defined(AR6002_REV43)
+#define AR6003_BOARD_EXT_DATA_SZ 1024
+#else
+#define AR6003_BOARD_EXT_DATA_SZ 768
+#endif
+#define AR6004_BOARD_DATA_SZ     7168
+#define AR6004_BOARD_EXT_DATA_SZ 0
+#define AR9888_BOARD_DATA_SZ     7168
+#define AR9888_BOARD_EXT_DATA_SZ 0
+#define AR6320_BOARD_DATA_SZ     8192
+#define AR6320_BOARD_EXT_DATA_SZ 0
+#define QCA9377_BOARD_DATA_SZ     8192
+#define QCA9377_BOARD_EXT_DATA_SZ 0
+#define AR900B_BOARD_DATA_SZ      (14 * 1024)
+#define AR900B_BOARD_EXT_DATA_SZ 0
+#define QCA9984_BOARD_DATA_SZ     (14 * 1024)
+#define QCA9984_BOARD_EXT_DATA_SZ 0
+#define QCA9888_BOARD_DATA_SZ     (14 * 1024)
+#define QCA9888_BOARD_EXT_DATA_SZ 0
+#define IPQ4019_BOARD_DATA_SZ     (14 * 1024)
+#define IPQ4019_BOARD_EXT_DATA_SZ 0
+
+/* Allocate board data right at the begining of AXI SRAM,
+ * Current size for beeliner is 14K.
+ * Allocate it towards the end of DRAM, until AXI SRAM is functional.
+ */
+#define AR900B_BOARD_DATA_ADDR    0xc0000
+#define QCA9984_BOARD_DATA_ADDR   0xc0000
+#define QCA9888_BOARD_DATA_ADDR   0xc0000
+#define IPQ4019_BOARD_DATA_ADDR   0xc0000
+
+#define AR6003_REV3_APP_START_OVERRIDE          0x946100
+#define AR6003_REV3_APP_LOAD_ADDRESS            0x545000
+#define AR6003_REV3_BOARD_EXT_DATA_ADDRESS      0x542330
+#define AR6003_REV3_DATASET_PATCH_ADDRESS       0x57FF74
+#define AR6003_REV3_RAM_RESERVE_SIZE            4096
+
+#define AR6004_REV1_BOARD_DATA_ADDRESS          0x423900
+#define AR6004_REV1_RAM_RESERVE_SIZE            19456
+#define AR6004_REV1_DATASET_PATCH_ADDRESS       0x425294
+
+#define AR6004_REV2_BOARD_DATA_ADDRESS          0x426400
+#define AR6004_REV2_RAM_RESERVE_SIZE            7168
+#define AR6004_REV2_DATASET_PATCH_ADDRESS       0x435294
+
+#define AR6004_REV5_BOARD_DATA_ADDRESS          0x436400
+#define AR6004_REV5_RAM_RESERVE_SIZE            7168
+#define AR6004_REV5_DATASET_PATCH_ADDRESS       0x437860
+
+/* Reserve 4K for OTA test script */
+#define AR6004_REV1_RAM_RESERVE_SIZE_FOR_TEST_SCRIPT    4096
+#define AR6004_REV1_TEST_SCRIPT_ADDRESS       0x422900
+
+/* # of A_UINT32 entries in targregs, used by DIAG_FETCH_TARG_REGS */
+#define AR6003_FETCH_TARG_REGS_COUNT 64
+#define AR6004_FETCH_TARG_REGS_COUNT 64
+#define AR9888_FETCH_TARG_REGS_COUNT 64
+#define AR6320_FETCH_TARG_REGS_COUNT 64
+#define AR900B_FETCH_TARG_REGS_COUNT 64
+
+#endif /* !__ASSEMBLER__ */
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#endif /* __TARGADDRS_H__ */

fw/targcfg.h

@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2013-2014 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef __TARGCFG_H__
+#define __TARGCFG_H__
+
+#if defined(ATH_TARGET)
+#include <osapi.h>   /* A_UINT32 */
+#else
+#include <a_types.h> /* A_UINT32 */
+#endif
+
+typedef struct _targcfg_t {
+    A_UINT32 num_vdev;
+    A_UINT32 num_peers;
+    A_UINT32 num_peer_ast;
+    A_UINT32 num_peer_keys;
+    A_UINT32 num_peer_tid;
+    A_UINT32 num_mcast_keys;
+    A_UINT32 num_tx;
+    A_UINT32 num_rx;
+    A_UINT32 num_mgmt_tx;
+    A_UINT32 num_mgmt_rx;
+    A_UINT32 tx_chain_mask;
+    A_UINT32 rx_chain_mask;
+    A_UINT32 override; /* Override target with the values supplied above */
+} targcfg_t;
+
+#endif /* __TARGCFG_H__ */

fw/wal_rx_desc.h

@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2011-2012, 2014, 2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef _WAL_RX_DESC__H_
+#define _WAL_RX_DESC__H_
+
+
+#if defined(ATH_TARGET)
+#include <athdefs.h> /* A_UINT8 */
+#else
+#include <a_types.h> /* A_UINT8 */
+#endif
+
+/*
+ * As this header is used by host also,
+ * and host will access target registers by target reg tbl,
+ * so disable direct-reference here for host.
+ *
+ */
+#if !defined(ATH_PERF_PWR_OFFLOAD)
+#if defined(CONFIG_AR900B_SUPPORT) || defined(AR900B) //FIXME_WIFI2 beeliner enbled by default (will be removed once we have target aware HTT)
+#include <hw/interface/rx_location_info.h>
+#include <hw/interface/rx_pkt_end.h>
+#include <hw/interface/rx_phy_ppdu_end.h>
+#include <hw/interface/rx_timing_offset.h>
+#include <hw/interface/rx_location_info.h>
+#include <hw/tlv/rx_attention.h>
+#include <hw/tlv/rx_frag_info.h>
+#include <hw/tlv/rx_msdu_start.h>
+#include <hw/tlv/rx_msdu_end.h>
+#include <hw/tlv/rx_mpdu_start.h>
+#include <hw/tlv/rx_mpdu_end.h>
+#include <hw/tlv/rx_ppdu_start.h>
+#include <hw/tlv/rx_ppdu_end.h>
+#else
+/* HW rx descriptor definitions */
+#include <mac_descriptors/rx_attention.h>
+#include <mac_descriptors/rx_frag_info.h>
+#include <mac_descriptors/rx_msdu_start.h>
+#include <mac_descriptors/rx_msdu_end.h>
+#include <mac_descriptors/rx_mpdu_start.h>
+#include <mac_descriptors/rx_mpdu_end.h>
+#include <mac_descriptors/rx_ppdu_start.h>
+#include <mac_descriptors/rx_ppdu_end.h>
+#endif
+/*
+ * This struct defines the basic descriptor information, which is
+ * written by the 11ac HW MAC into the WAL's rx status descriptor
+ * ring.
+ */
+struct hw_rx_desc_base {
+    struct rx_attention  attention;
+    struct rx_frag_info  frag_info;
+    struct rx_mpdu_start mpdu_start;
+    struct rx_msdu_start msdu_start;
+    struct rx_msdu_end   msdu_end;
+    struct rx_mpdu_end   mpdu_end;
+    struct rx_ppdu_start ppdu_start;
+    struct rx_ppdu_end   ppdu_end;
+};
+#endif
+
+/*
+ * This struct defines the basic MSDU rx descriptor created by FW.
+ */
+struct fw_rx_desc_base {
+    union {
+        struct {
+            A_UINT8 discard  : 1,
+                    forward  : 1,
+                    any_err  : 1,
+                    dup_err  : 1,
+                    ipa_ind  : 1,
+                    inspect  : 1,
+                    extension: 2;
+        }bits;
+        A_UINT8     val;
+    }u;
+};
+
+#define FW_RX_DESC_DISCARD_M 0x1
+#define FW_RX_DESC_DISCARD_S 0
+#define FW_RX_DESC_FORWARD_M 0x2
+#define FW_RX_DESC_FORWARD_S 1
+#define FW_RX_DESC_ANY_ERR_M 0x4
+#define FW_RX_DESC_ANY_ERR_S 2
+#define FW_RX_DESC_DUP_ERR_M 0x8
+#define FW_RX_DESC_DUP_ERR_S 3
+#define FW_RX_DESC_INSPECT_M 0x20
+#define FW_RX_DESC_INSPECT_S 5
+#define FW_RX_DESC_EXT_M     0xc0
+#define FW_RX_DESC_EXT_S     6
+
+#define FW_RX_DESC_CNT_2_BYTES(_fw_desc_cnt)    (_fw_desc_cnt)
+
+enum {
+    FW_RX_DESC_EXT_NONE          = 0,
+    FW_RX_DESC_EXT_LRO_ONLY,
+    FW_RX_DESC_EXT_LRO_AND_OTHER,
+    FW_RX_DESC_EXT_OTHER
+};
+
+#define FW_RX_DESC_DISCARD_GET(_var) \
+    (((_var) & FW_RX_DESC_DISCARD_M) >> FW_RX_DESC_DISCARD_S)
+#define FW_RX_DESC_DISCARD_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_DESC_DISCARD_S))
+
+#define FW_RX_DESC_FORWARD_GET(_var) \
+    (((_var) & FW_RX_DESC_FORWARD_M) >> FW_RX_DESC_FORWARD_S)
+#define FW_RX_DESC_FORWARD_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_DESC_FORWARD_S))
+
+#define FW_RX_DESC_INSPECT_GET(_var) \
+    (((_var) & FW_RX_DESC_INSPECT_M) >> FW_RX_DESC_INSPECT_S)
+#define FW_RX_DESC_INSPECT_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_DESC_INSPECT_S))
+
+#define FW_RX_DESC_EXT_GET(_var) \
+    (((_var) & FW_RX_DESC_EXT_M) >> FW_RX_DESC_EXT_S)
+#define FW_RX_DESC_EXT_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_DESC_EXT_S))
+
+
+/*
+ * This struct defines TCP_CHKSUM_OFFLOAD bit fields which are needed by host.
+ */
+struct fw_rx_msdu_info {
+    union {
+        /*
+         * The "bits" struct defines the flags in fw_rx_msdu_info used
+         * during regular operation.
+         */
+        struct {
+            A_UINT8 tcp_udp_chksum_fail : 1, /* for tcp checksum offload use */
+                    ip_chksum_fail      : 1,
+                    ipv6_proto          : 1,
+                    tcp_proto           : 1,
+                    udp_proto           : 1,
+                    ip_frag             : 1,
+                    first_wakeup        : 1,
+                    reserved            : 1;
+        } bits;
+        /*
+         * The "mon" struct defines the flags in fw_rx_msdu_info used
+         * during monitor mode.
+         */
+        struct {
+            A_UINT8 last_frag           : 1,
+                    reserved            : 7;
+        } mon;
+        A_UINT8     val;
+    } u;
+};
+
+/* regular operation flags */
+
+#define FW_RX_MSDU_INFO_TCP_UDP_CHKSUM_FAIL_M 0x1
+#define FW_RX_MSDU_INFO_TCP_UDP_CHKSUM_FAIL_S 0
+#define FW_RX_MSDU_INFO_IP_CHKSUM_FAIL_M      0x2
+#define FW_RX_MSDU_INFO_IP_CHKSUM_FAIL_S      1
+#define FW_RX_MSDU_INFO_IPV6_PROTO_M          0x4
+#define FW_RX_MSDU_INFO_IPV6_PROTO_S          2
+#define FW_RX_MSDU_INFO_TCP_PROTO_M           0x8
+#define FW_RX_MSDU_INFO_TCP_PROTO_S           3
+#define FW_RX_MSDU_INFO_UDP_PROTO_M           0x10
+#define FW_RX_MSDU_INFO_UDP_PROTO_S           4
+#define FW_RX_MSDU_INFO_IP_FRAG_M             0x20
+#define FW_RX_MSDU_INFO_IP_FRAG_S             5
+#define FW_RX_MSDU_INFO_FIRST_WAKEUP_M        0x40
+#define FW_RX_MSDU_INFO_FIRST_WAKEUP_S        6
+
+#define FW_RX_MSDU_INFO_TCP_UDP_CHKSUM_FAIL_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_TCP_UDP_CHKSUM_FAIL_M) >> FW_RX_MSDU_INFO_TCP_UDP_CHKSUM_FAIL_S)
+#define FW_RX_MSDU_INFO_TCP_UDP_CHKSUM_FAIL_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_TCP_UDP_CHKSUM_FAIL_S))
+
+#define FW_RX_MSDU_INFO_IP_CHKSUM_FAIL_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_IP_CHKSUM_FAIL_M) >> FW_RX_MSDU_INFO_IP_CHKSUM_FAIL_S)
+#define FW_RX_MSDU_INFO_IP_CHKSUM_FAIL_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_IP_CHKSUM_FAIL_S))
+
+#define FW_RX_MSDU_INFO_IPV6_PROTO_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_IPV6_PROTO_M) >> FW_RX_MSDU_INFO_IPV6_PROTO_S)
+#define FW_RX_MSDU_INFO_IPV6_PROTO_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_IPV6_PROTO_S))
+
+#define FW_RX_MSDU_INFO_TCP_PROTO_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_TCP_PROTO_M) >> FW_RX_MSDU_INFO_TCP_PROTO_S)
+#define FW_RX_MSDU_INFO_TCP_PROTO_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_TCP_PROTO_S))
+
+#define FW_RX_MSDU_INFO_UDP_PROTO_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_UDP_PROTO_M) >> FW_RX_MSDU_INFO_UDP_PROTO_S)
+#define FW_RX_MSDU_INFO_UDP_PROTO_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_UDP_PROTO_S))
+
+#define FW_RX_MSDU_INFO_IP_FRAG_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_IP_FRAG_M) >> FW_RX_MSDU_INFO_IP_FRAG_S)
+#define FW_RX_MSDU_INFO_IP_FRAG_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_IP_FRAG_S))
+
+#define FW_RX_MSDU_INFO_FIRST_WAKEUP_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_FIRST_WAKEUP_M) >> FW_RX_MSDU_INFO_FIRST_WAKEUP_S)
+#define FW_RX_MSDU_INFO_FIRST_WAKEUP_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_FIRST_WAKEUP_S))
+
+
+/* monitor mode flags */
+
+#define FW_RX_MSDU_INFO_MON_LAST_FRAG_M       0x1
+#define FW_RX_MSDU_INFO_MON_LAST_FRAG_S       0
+
+
+#define FW_RX_MSDU_INFO_MON_LAST_FRAG_GET(_var) \
+    (((_var) & FW_RX_MSDU_INFO_MON_LAST_FRAG_M) >> FW_RX_MSDU_INFO_MON_LAST_FRAG_S)
+#define FW_RX_MSDU_INFO_MON_LAST_FRAG_SET(_var, _val) \
+    ((_var) |= ((_val) << FW_RX_MSDU_INFO_MON_LAST_FRAG_S))
+
+
+#endif /* _WAL_RX_DESC__H_ */

fw/wlan_defs.h

@@ -0,0 +1,895 @@
+/*
+ * Copyright (c) 2004-2010, 2013-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef __WLAN_DEFS_H__
+#define __WLAN_DEFS_H__
+
+#include <a_osapi.h> /* A_COMPILE_TIME_ASSERT */
+
+/*
+ * This file contains WLAN definitions that may be used across both
+ * Host and Target software.
+ */
+
+
+/*
+ * MAX_SPATIAL_STREAM should be defined in a fwconfig_xxx.h file,
+ * but for now provide a default value here in case it's not defined
+ * in the fwconfig_xxx.h file.
+ */
+#ifndef MAX_SPATIAL_STREAM
+#define MAX_SPATIAL_STREAM 3
+#endif
+
+#ifndef CONFIG_160MHZ_SUPPORT
+#define CONFIG_160MHZ_SUPPORT 0 /* default: 160 MHz channels not supported */
+#endif
+
+#ifndef SUPPORT_11AX
+#define SUPPORT_11AX 0 /* 11ax not supported by default */
+#endif
+
+/*
+ * MAX_SPATIAL_STREAM_ANY -
+ * what is the largest number of spatial streams that any target supports
+ */
+#define MAX_SPATIAL_STREAM_ANY_V2 4 /* pre-hawkeye */
+#define MAX_SPATIAL_STREAM_ANY_V3 8 /* includes hawkeye */
+/*
+ * (temporarily) leave the old MAX_SPATIAL_STREAM_ANY name in place as an alias,
+ * and in case some old code is using it
+ */
+#define MAX_SPATIAL_STREAM_ANY MAX_SPATIAL_STREAM_ANY_V2 /* DEPRECATED */
+
+typedef enum {
+    MODE_11A        = 0,   /* 11a Mode */
+    MODE_11G        = 1,   /* 11b/g Mode */
+    MODE_11B        = 2,   /* 11b Mode */
+    MODE_11GONLY    = 3,   /* 11g only Mode */
+    MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
+    MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
+    MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
+    MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
+    MODE_11AC_VHT20 = 8,
+    MODE_11AC_VHT40 = 9,
+    MODE_11AC_VHT80 = 10,
+    MODE_11AC_VHT20_2G = 11,
+    MODE_11AC_VHT40_2G = 12,
+    MODE_11AC_VHT80_2G = 13,
+#if CONFIG_160MHZ_SUPPORT
+    MODE_11AC_VHT80_80 = 14,
+    MODE_11AC_VHT160   = 15,
+#endif
+
+#if SUPPORT_11AX
+    MODE_11AX_HE20 = 16,
+    MODE_11AX_HE40 = 17,
+    MODE_11AX_HE80 = 18,
+    MODE_11AX_HE80_80 = 19,
+    MODE_11AX_HE160 = 20,
+    MODE_11AX_HE20_2G = 21,
+    MODE_11AX_HE40_2G = 22,
+    MODE_11AX_HE80_2G = 23,
+#endif
+
+    /*
+     * MODE_UNKNOWN should not be used within the host / target interface.
+     * Thus, it is permissible for ODE_UNKNOWN to be conditionally-defined,
+     * taking different values when compiling for different targets.
+     */
+    MODE_UNKNOWN,
+    MODE_UNKNOWN_NO_160MHZ_SUPPORT = 14, /* not needed? */
+#if 0
+    MODE_UNKNOWN_NO_11AX_SUPPORT = 16, /* not needed? */
+    MODE_UNKNOWN_11AX_SUPPORT = 24, /* not needed? */
+#endif
+    MODE_UNKNOWN_160MHZ_SUPPORT = MODE_UNKNOWN, /* not needed? */
+
+#ifdef ATHR_WIN_NWF
+    PHY_MODE_MAX    = MODE_UNKNOWN,
+    PHY_MODE_MAX_NO_160_MHZ_SUPPORT = MODE_UNKNOWN_NO_160MHZ_SUPPORT,
+    PHY_MODE_MAX_160_MHZ_SUPPORT    = MODE_UNKNOWN_160MHZ_SUPPORT,
+#else
+    MODE_MAX        = MODE_UNKNOWN,
+    MODE_MAX_NO_160_MHZ_SUPPORT = MODE_UNKNOWN_NO_160MHZ_SUPPORT,
+    MODE_MAX_160_MHZ_SUPPORT    = MODE_UNKNOWN_160MHZ_SUPPORT,
+#endif
+} WLAN_PHY_MODE;
+
+#if CONFIG_160MHZ_SUPPORT == 0
+A_COMPILE_TIME_ASSERT(
+    mode_unknown_value_consistency_Check,
+    MODE_UNKNOWN == MODE_UNKNOWN_NO_160MHZ_SUPPORT);
+#else
+A_COMPILE_TIME_ASSERT(
+    mode_unknown_value_consistency_Check,
+    MODE_UNKNOWN == MODE_UNKNOWN_160MHZ_SUPPORT);
+#endif
+
+typedef enum {
+    VHT_MODE_NONE = 0,  /* NON VHT Mode, e.g., HT, DSSS, CCK */
+    VHT_MODE_20M = 1,
+    VHT_MODE_40M = 2,
+    VHT_MODE_80M = 3,
+    VHT_MODE_160M = 4
+} VHT_OPER_MODE;
+
+typedef enum {
+    WLAN_11A_CAPABILITY   = 1,
+    WLAN_11G_CAPABILITY   = 2,
+    WLAN_11AG_CAPABILITY  = 3,
+} WLAN_CAPABILITY;
+
+#if (NUM_SPATIAL_STREAM > 4) || SUPPORT_11AX
+  typedef struct {
+      A_UINT64 mask_l;
+      A_UINT64 mask_h;
+  } A_RATEMASK;
+#elif (NUM_SPATIAL_STREAM > 3)
+  #define A_RATEMASK A_UINT64
+#else
+  #define A_RATEMASK A_UINT32
+#endif
+
+#if (NUM_SPATIAL_STREAM > 4) || SUPPORT_11AX
+  typedef A_UINT16 A_RATE;
+  typedef A_UINT16 A_RATECODE;
+#else
+  typedef A_UINT8 A_RATE;
+  typedef A_UINT8 A_RATECODE;
+#endif
+
+#define A_RATEMASK_NUM_OCTET (sizeof (A_RATEMASK))
+#define A_RATEMASK_NUM_BITS ((sizeof (A_RATEMASK)) << 3)
+
+
+#if CONFIG_160MHZ_SUPPORT
+#define IS_MODE_VHT(mode) (((mode) == MODE_11AC_VHT20) || \
+        ((mode) == MODE_11AC_VHT40)     || \
+        ((mode) == MODE_11AC_VHT80)     || \
+        ((mode) == MODE_11AC_VHT80_80)  || \
+        ((mode) == MODE_11AC_VHT160))
+#else
+#define IS_MODE_VHT(mode) (((mode) == MODE_11AC_VHT20) || \
+        ((mode) == MODE_11AC_VHT40) || \
+        ((mode) == MODE_11AC_VHT80))
+#endif
+
+#define IS_MODE_HE(mode) (((mode) == MODE_11AX_HE20) || \
+        ((mode) == MODE_11AX_HE40)     || \
+        ((mode) == MODE_11AX_HE80)     || \
+        ((mode) == MODE_11AX_HE80_80)  || \
+        ((mode) == MODE_11AX_HE160)    || \
+        ((mode) == MODE_11AX_HE20_2G)  || \
+        ((mode) == MODE_11AX_HE40_2G)  || \
+        ((mode) == MODE_11AX_HE80_2G))
+
+#define IS_MODE_VHT_2G(mode) (((mode) == MODE_11AC_VHT20_2G) || \
+        ((mode) == MODE_11AC_VHT40_2G) || \
+        ((mode) == MODE_11AC_VHT80_2G))
+
+
+#define IS_MODE_11A(mode)       (((mode) == MODE_11A) || \
+                                 ((mode) == MODE_11NA_HT20) || \
+                                 ((mode) == MODE_11NA_HT40) || \
+                                 (IS_MODE_VHT(mode)))
+
+#define IS_MODE_11B(mode)       ((mode) == MODE_11B)
+#define IS_MODE_11G(mode)       (((mode) == MODE_11G) || \
+                                 ((mode) == MODE_11GONLY) || \
+                                 ((mode) == MODE_11NG_HT20) || \
+                                 ((mode) == MODE_11NG_HT40) || \
+                                 (IS_MODE_VHT_2G(mode)))
+#define IS_MODE_11GN(mode)      (((mode) == MODE_11NG_HT20) || \
+                                 ((mode) == MODE_11NG_HT40))
+#define IS_MODE_11GONLY(mode)   ((mode) == MODE_11GONLY)
+
+
+enum {
+    REGDMN_MODE_11A              = 0x00000001,  /* 11a channels */
+    REGDMN_MODE_TURBO            = 0x00000002,  /* 11a turbo-only channels */
+    REGDMN_MODE_11B              = 0x00000004,  /* 11b channels */
+    REGDMN_MODE_PUREG            = 0x00000008,  /* 11g channels (OFDM only) */
+    REGDMN_MODE_11G              = 0x00000008,  /* XXX historical */
+    REGDMN_MODE_108G             = 0x00000020,  /* 11g+Turbo channels */
+    REGDMN_MODE_108A             = 0x00000040,  /* 11a+Turbo channels */
+    REGDMN_MODE_XR               = 0x00000100,  /* XR channels */
+    REGDMN_MODE_11A_HALF_RATE    = 0x00000200,  /* 11A half rate channels */
+    REGDMN_MODE_11A_QUARTER_RATE = 0x00000400,  /* 11A quarter rate channels */
+    REGDMN_MODE_11NG_HT20        = 0x00000800,  /* 11N-G HT20 channels */
+    REGDMN_MODE_11NA_HT20        = 0x00001000,  /* 11N-A HT20 channels */
+    REGDMN_MODE_11NG_HT40PLUS    = 0x00002000,  /* 11N-G HT40 + channels */
+    REGDMN_MODE_11NG_HT40MINUS   = 0x00004000,  /* 11N-G HT40 - channels */
+    REGDMN_MODE_11NA_HT40PLUS    = 0x00008000,  /* 11N-A HT40 + channels */
+    REGDMN_MODE_11NA_HT40MINUS   = 0x00010000,  /* 11N-A HT40 - channels */
+    REGDMN_MODE_11AC_VHT20       = 0x00020000,  /* 5Ghz, VHT20 */
+    REGDMN_MODE_11AC_VHT40PLUS   = 0x00040000,  /* 5Ghz, VHT40 + channels */
+    REGDMN_MODE_11AC_VHT40MINUS  = 0x00080000,  /* 5Ghz  VHT40 - channels */
+    REGDMN_MODE_11AC_VHT80       = 0x000100000, /* 5Ghz, VHT80 channels */
+    REGDMN_MODE_11AC_VHT20_2G    = 0x000200000, /* 2Ghz, VHT20 */
+    REGDMN_MODE_11AC_VHT40_2G    = 0x000400000, /* 2Ghz, VHT40 */
+    REGDMN_MODE_11AC_VHT80_2G    = 0x000800000, /* 2Ghz, VHT80 */
+    REGDMN_MODE_11AC_VHT160      = 0x001000000, /* 5Ghz, VHT160 */
+    REGDMN_MODE_11AC_VHT40_2GPLUS  = 0x002000000, /* 2Ghz, VHT40+ */
+    REGDMN_MODE_11AC_VHT40_2GMINUS = 0x004000000, /* 2Ghz, VHT40- */
+    REGDMN_MODE_11AC_VHT80_80      = 0x008000000, /* 5GHz, VHT80+80 */
+};
+
+#define REGDMN_MODE_ALL       (0xFFFFFFFF)       /* REGDMN_MODE_ALL is defined out of the enum
+                                                  * to prevent the ARM compile "warning #66:
+                                                  * enumeration value is out of int range"
+                                                  * Anyway, this is a BIT-OR of all possible values.
+                                                  */
+
+#define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
+#define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
+#define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
+
+
+/* regulatory capabilities */
+#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
+
+typedef struct {
+    A_UINT32 tlv_header;     /* TLV tag and len; tag equals WMI_TLVTAG_STRUC_HAL_REG_CAPABILITIES */
+    A_UINT32 eeprom_rd;      /* regdomain value specified in EEPROM */
+    A_UINT32 eeprom_rd_ext;  /* regdomain */
+    A_UINT32 regcap1;        /* CAP1 capabilities bit map. */
+    A_UINT32 regcap2;        /* REGDMN EEPROM CAP. */
+    A_UINT32 wireless_modes; /* REGDMN MODE */
+    A_UINT32 low_2ghz_chan;
+    A_UINT32 high_2ghz_chan;
+    A_UINT32 low_5ghz_chan;
+    A_UINT32 high_5ghz_chan;
+} HAL_REG_CAPABILITIES;
+
+/*
+ * Used to update rate-control logic with the status of the tx-completion.
+ * In host-based implementation of the rate-control feature, this struture is used to
+ * create the payload for HTT message/s from target to host.
+ */
+
+typedef struct {
+    A_RATECODE rateCode;
+    A_UINT8 flags;
+} RATE_CODE;
+
+typedef struct {
+    RATE_CODE ptx_rc; /* rate code, bw, chain mask sgi */
+    A_UINT8 reserved[2];
+    A_UINT32 flags;       /* Encodes information such as excessive
+                             retransmission, aggregate, some info
+                             from .11 frame control,
+                             STBC, LDPC, (SGI and Tx Chain Mask
+                             are encoded in ptx_rc->flags field),
+                             AMPDU truncation (BT/time based etc.),
+                             RTS/CTS attempt  */
+    A_UINT32 num_enqued;  /* # of MPDUs (for non-AMPDU 1) for this rate */
+    A_UINT32 num_retries; /* Total # of transmission attempt for this rate */
+    A_UINT32 num_failed;  /* # of failed MPDUs in A-MPDU, 0 otherwise */
+    A_UINT32 ack_rssi;    /* ACK RSSI: b'7..b'0 avg RSSI across all chain */
+    A_UINT32 time_stamp ; /* ACK timestamp (helps determine age) */
+    A_UINT32 is_probe;    /* Valid if probing. Else, 0 */
+    A_UINT32 ba_win_size; /* b'7..b0, block Ack Window size, b'31..b8 Resvd */
+    A_UINT32 failed_ba_bmap_0_31; /* failed BA bitmap 0..31 */
+    A_UINT32 failed_ba_bmap_32_63; /* failed BA bitmap 32..63 */
+    A_UINT32 bmap_tried_0_31; /* enqued bitmap 0..31 */
+    A_UINT32 bmap_tried_32_63; /* enqued bitmap 32..63 */
+} RC_TX_DONE_PARAMS;
+
+
+#define RC_SET_TX_DONE_INFO(_dst, _rc, _f, _nq, _nr, _nf, _rssi, _ts) \
+    do {                                                              \
+        (_dst).ptx_rc.rateCode = (_rc).rateCode;                      \
+        (_dst).ptx_rc.flags    = (_rc).flags;                         \
+        (_dst).flags           = (_f);                                \
+        (_dst).num_enqued      = (_nq);                               \
+        (_dst).num_retries     = (_nr);                               \
+        (_dst).num_failed      = (_nf);                               \
+        (_dst).ack_rssi        = (_rssi);                             \
+        (_dst).time_stamp      = (_ts);                               \
+    } while (0)
+
+#define RC_SET_TXBF_DONE_INFO(_dst, _f)                                 \
+    do {                                                                \
+        (_dst).flags           |= (_f);                                 \
+    } while (0)
+
+/* NOTE: NUM_DYN_BW and NUM_SCHED_ENTRIES cannot be changed without breaking WMI Compatibility */
+#define NUM_SCHED_ENTRIES           2
+#define NUM_DYN_BW_MAX              4
+
+/* Some products only use 20/40/80; some use 20/40/80/160 */
+#ifndef NUM_DYN_BW
+#define NUM_DYN_BW                  3 /* default: support up through 80 MHz */
+#endif
+
+#define NUM_DYN_BW_MASK             0x3
+
+#define PROD_SCHED_BW_ENTRIES       (NUM_SCHED_ENTRIES * NUM_DYN_BW)
+
+#if NUM_DYN_BW  > 4
+/* Extend rate table module first */
+#error "Extend rate table module first"
+#endif
+
+#define MAX_IBSS_PEERS 32
+
+/*
+ * RC_TX_RATE_SCHEDULE and RC_TX_RATE_INFO defs are used only in the target.
+ * (Host-based rate control is no longer applicable.)
+ * Maintain the defs in wlanfw_cmn for the sake of existing Rome / Helium
+ * targets, but for Lithium targets remove them from wlanfw_cmn and define
+ * them in a target-only location instead.
+ * SUPPORT_11AX is essentially used as a condition to identify Lithium targets.
+ * Some host drivers would also have SUPPORT_11AX defined, and thus would lose
+ * the definition of RC_TX_RATE_SCHEDULE and RC_TX_RATE_INFO, but that's okay
+ * because the host should have no references to these target-only data
+ * structures.
+ */
+#if !((NUM_SPATIAL_STREAM > 4) || SUPPORT_11AX)
+  #if defined(CONFIG_AR900B_SUPPORT) || defined(AR900B)
+  typedef struct{
+      A_UINT32    psdu_len[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_UINT16    flags[NUM_SCHED_ENTRIES][NUM_DYN_BW];
+      A_RATE      rix[NUM_SCHED_ENTRIES][NUM_DYN_BW];
+      A_UINT8     tpc[NUM_SCHED_ENTRIES][NUM_DYN_BW];
+      A_UINT32    antmask[NUM_SCHED_ENTRIES];
+      A_UINT8     num_mpdus[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_UINT16    txbf_cv_len;
+      A_UINT32    txbf_cv_ptr;
+      A_UINT16    txbf_flags;
+      A_UINT16    txbf_cv_size;
+      A_UINT8     txbf_nc_idx;
+      A_UINT8     tries[NUM_SCHED_ENTRIES];
+      A_UINT8     bw_mask[NUM_SCHED_ENTRIES];
+      A_UINT8     max_bw[NUM_SCHED_ENTRIES];
+      A_UINT8     num_sched_entries;
+      A_UINT8     paprd_mask;
+      A_UINT8     rts_rix;
+      A_UINT8     sh_pream;
+      A_UINT8     min_spacing_1_4_us;
+      A_UINT8     fixed_delims;
+      A_UINT8     bw_in_service;
+      A_RATE      probe_rix;
+      A_UINT8     num_valid_rates;
+      A_UINT8     rtscts_tpc;
+      A_UINT8     dd_profile;
+  } RC_TX_RATE_SCHEDULE;
+  #else
+  typedef struct{
+      A_UINT32    psdu_len[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_UINT16    flags[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_RATE      rix[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_UINT8     tpc[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_UINT8     num_mpdus[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_UINT32    antmask[NUM_SCHED_ENTRIES];
+      A_UINT32    txbf_cv_ptr;
+      A_UINT16    txbf_cv_len;
+      A_UINT8     tries[NUM_SCHED_ENTRIES];
+      A_UINT8     num_valid_rates;
+      A_UINT8     paprd_mask;
+      A_UINT8     rts_rix;
+      A_UINT8     sh_pream;
+      A_UINT8     min_spacing_1_4_us;
+      A_UINT8     fixed_delims;
+      A_UINT8     bw_in_service;
+      A_RATE      probe_rix;
+  } RC_TX_RATE_SCHEDULE;
+  #endif
+
+  typedef struct{
+      A_UINT16    flags[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+      A_RATE      rix[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+  #ifdef DYN_TPC_ENABLE
+      A_UINT8     tpc[NUM_DYN_BW * NUM_SCHED_ENTRIES];
+  #endif
+  #ifdef SECTORED_ANTENNA
+      A_UINT32    antmask[NUM_SCHED_ENTRIES];
+  #endif
+      A_UINT8     tries[NUM_SCHED_ENTRIES];
+      A_UINT8     num_valid_rates;
+      A_UINT8     rts_rix;
+      A_UINT8     sh_pream;
+      A_UINT8     bw_in_service;
+      A_RATE      probe_rix;
+      A_UINT8     dd_profile;
+  } RC_TX_RATE_INFO;
+#endif /* !((NUM_SPATIAL_STREAM > 4) || SUPPORT_11AX) */
+
+/*
+ * Temporarily continue to provide the WHAL_RC_INIT_RC_MASKS def in wlan_defs.h
+ * for older targets.
+ * The WHAL_RX_INIT_RC_MASKS macro def needs to be moved into ratectrl_11ac.h
+ * for all targets, but until this is complete, the WHAL_RC_INIT_RC_MASKS def
+ * will be maintained here in its old location.
+ */
+#if CONFIG_160MHZ_SUPPORT == 0
+#define WHAL_RC_INIT_RC_MASKS(_rm) do {                                     \
+        _rm[WHAL_RC_MASK_IDX_NON_HT] = A_RATEMASK_OFDM_CCK;                 \
+        _rm[WHAL_RC_MASK_IDX_HT_20] = A_RATEMASK_HT_20;                     \
+        _rm[WHAL_RC_MASK_IDX_HT_40] = A_RATEMASK_HT_40;                     \
+        _rm[WHAL_RC_MASK_IDX_VHT_20] = A_RATEMASK_VHT_20;                   \
+        _rm[WHAL_RC_MASK_IDX_VHT_40] = A_RATEMASK_VHT_40;                   \
+        _rm[WHAL_RC_MASK_IDX_VHT_80] = A_RATEMASK_VHT_80;                   \
+        } while (0)
+#endif
+
+/**
+ * strucutre describing host memory chunk.
+ */
+typedef struct {
+   A_UINT32   tlv_header;     /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wlan_host_memory_chunk */
+   /** id of the request that is passed up in service ready */
+   A_UINT32 req_id;
+   /** the physical address the memory chunk */
+   A_UINT32 ptr;
+   /** size of the chunk */
+   A_UINT32 size;
+} wlan_host_memory_chunk;
+
+#define NUM_UNITS_IS_NUM_VDEVS        0x1
+#define NUM_UNITS_IS_NUM_PEERS        0x2
+#define NUM_UNITS_IS_NUM_ACTIVE_PEERS 0x4
+/* request host to allocate memory contiguously */
+#define REQ_TO_HOST_FOR_CONT_MEMORY   0x8
+
+/**
+ * structure used by FW for requesting host memory
+ */
+typedef struct {
+    A_UINT32    tlv_header;     /* TLV tag and len; tag equals WMI_TLVTAG_STRUC_wlan_host_mem_req */
+
+    /** ID of the request */
+    A_UINT32    req_id;
+    /** size of the  of each unit */
+    A_UINT32    unit_size;
+    /**
+     * flags to  indicate that
+     * the number units is dependent
+     * on number of resources(num vdevs num peers .. etc)
+     */
+    A_UINT32    num_unit_info;
+    /*
+     * actual number of units to allocate . if flags in the num_unit_info
+     * indicate that number of units is tied to number of a particular
+     * resource to allocate then  num_units filed is set to 0 and host
+     * will derive the number units from number of the resources it is
+     * requesting.
+     */
+    A_UINT32    num_units;
+} wlan_host_mem_req;
+
+typedef enum {
+    IGNORE_DTIM = 0x01,
+    NORMAL_DTIM = 0x02,
+    STICK_DTIM  = 0x03,
+    AUTO_DTIM   = 0x04,
+} BEACON_DTIM_POLICY;
+
+/* During test it is observed that 6 * 400 = 2400 can
+ * be alloced in addition to CFG_TGT_NUM_MSDU_DESC.
+ * If there is any change memory requirement, this number
+ * needs to be revisited. */
+#define TOTAL_VOW_ALLOCABLE 2400
+#define VOW_DESC_GRAB_MAX 800
+
+#define VOW_GET_NUM_VI_STA(vow_config) (((vow_config) & 0xffff0000) >> 16)
+#define VOW_GET_DESC_PER_VI_STA(vow_config) ((vow_config) & 0x0000ffff)
+
+/***TODO!!! Get these values dynamically in WMI_READY event and use it to calculate the mem req*/
+/* size in bytes required for msdu descriptor. If it changes, this should be updated. LARGE_AP
+ * case is not considered. LARGE_AP is disabled when VoW is enabled.*/
+#define MSDU_DESC_SIZE 20
+
+/* size in bytes required to support a peer in target.
+ * This obtained by considering Two tids per peer.
+ * peer structure = 168 bytes
+ * tid = 96 bytes (per sta 2 means we need 192 bytes)
+ * peer_cb = 16 * 2
+ * key = 52 * 2
+ * AST = 12 * 2
+ * rate, reorder.. = 384
+ * smart antenna = 50
+ */
+#define MEMORY_REQ_FOR_PEER 800
+/*
+ * NB: it is important to keep all the fields in the structure dword long
+ * so that it is easy to handle the statistics in BE host.
+ */
+
+struct wlan_dbg_tx_stats {
+    /* Num HTT cookies queued to dispatch list */
+    A_INT32 comp_queued;
+    /* Num HTT cookies dispatched */
+    A_INT32 comp_delivered;
+    /* Num MSDU queued to WAL */
+    A_INT32 msdu_enqued;
+    /* Num MPDU queue to WAL */
+    A_INT32 mpdu_enqued;
+    /* Num MSDUs dropped by WMM limit */
+    A_INT32 wmm_drop;
+    /* Num Local frames queued */
+    A_INT32 local_enqued;
+    /* Num Local frames done */
+    A_INT32 local_freed;
+    /* Num queued to HW */
+    A_INT32 hw_queued;
+    /* Num PPDU reaped from HW */
+    A_INT32 hw_reaped;
+    /* Num underruns */
+    A_INT32 underrun;
+#if defined(AR900B)
+    /* HW Paused. */
+    A_UINT32 hw_paused;
+#endif
+    /* Num PPDUs cleaned up in TX abort */
+    A_INT32 tx_abort;
+    /* Num MPDUs requed by SW */
+    A_INT32 mpdus_requed;
+    /* excessive retries */
+    A_UINT32 tx_ko;
+#if defined(AR900B)
+    A_UINT32 tx_xretry;
+#endif
+    /* data hw rate code */
+    A_UINT32 data_rc;
+    /* Scheduler self triggers */
+    A_UINT32 self_triggers;
+    /* frames dropped due to excessive sw retries */
+    A_UINT32 sw_retry_failure;
+    /* illegal rate phy errors  */
+    A_UINT32 illgl_rate_phy_err;
+    /* wal pdev continous xretry */
+    A_UINT32 pdev_cont_xretry;
+    /* wal pdev continous xretry */
+    A_UINT32 pdev_tx_timeout;
+    /* wal pdev resets  */
+    A_UINT32 pdev_resets;
+    /* frames dropped due to non-availability of stateless TIDs */
+    A_UINT32 stateless_tid_alloc_failure;
+    /* PhY/BB underrun */
+    A_UINT32 phy_underrun;
+    /* MPDU is more than txop limit */
+    A_UINT32 txop_ovf;
+#if defined(AR900B)
+    /* Number of Sequences posted */
+    A_UINT32 seq_posted;
+    /* Number of Sequences failed queueing */
+    A_UINT32 seq_failed_queueing;
+    /* Number of Sequences completed */
+    A_UINT32 seq_completed;
+    /* Number of Sequences restarted */
+    A_UINT32 seq_restarted;
+    /* Number of MU Sequences posted */
+    A_UINT32 mu_seq_posted;
+    /* Num MPDUs flushed by SW, HWPAUSED, SW TXABORT (Reset,channel change) */
+    A_INT32 mpdus_sw_flush;
+    /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
+    A_INT32 mpdus_hw_filter;
+    /* Num MPDUs truncated by PDG (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) */
+    A_INT32 mpdus_truncated;
+    /* Num MPDUs that was tried but didn't receive ACK or BA */
+    A_INT32 mpdus_ack_failed;
+    /* Num MPDUs that was dropped du to expiry. */
+    A_INT32 mpdus_expired;
+#endif
+};
+
+struct wlan_dbg_rx_stats {
+    /* Cnts any change in ring routing mid-ppdu */
+    A_INT32 mid_ppdu_route_change;
+    /* Total number of statuses processed */
+    A_INT32 status_rcvd;
+    /* Extra frags on rings 0-3 */
+    A_INT32 r0_frags;
+    A_INT32 r1_frags;
+    A_INT32 r2_frags;
+    A_INT32 r3_frags;
+    /* MSDUs / MPDUs delivered to HTT */
+    A_INT32 htt_msdus;
+    A_INT32 htt_mpdus;
+    /* MSDUs / MPDUs delivered to local stack */
+    A_INT32 loc_msdus;
+    A_INT32 loc_mpdus;
+    /* AMSDUs that have more MSDUs than the status ring size */
+    A_INT32 oversize_amsdu;
+    /* Number of PHY errors */
+    A_INT32 phy_errs;
+    /* Number of PHY errors drops */
+    A_INT32 phy_err_drop;
+    /* Number of mpdu errors - FCS, MIC, ENC etc. */
+    A_INT32 mpdu_errs;
+#if defined(AR900B)
+    /* Number of rx overflow errors. */
+    A_INT32 rx_ovfl_errs;
+#endif
+};
+
+
+struct wlan_dbg_mem_stats {
+    A_UINT32 iram_free_size;
+    A_UINT32 dram_free_size;
+};
+
+struct wlan_dbg_peer_stats {
+
+	A_INT32 dummy; /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
+};
+
+typedef struct {
+    A_UINT32 mcs[10];
+    A_UINT32 sgi[10];
+    A_UINT32 nss[4];
+    A_UINT32 nsts;
+    A_UINT32 stbc[10];
+    A_UINT32 bw[3];
+    A_UINT32 pream[6];
+    A_UINT32 ldpc;
+    A_UINT32 txbf;
+    A_UINT32 mgmt_rssi;
+    A_UINT32 data_rssi;
+    A_UINT32 rssi_chain0;
+    A_UINT32 rssi_chain1;
+    A_UINT32 rssi_chain2;
+/*
+ * TEMPORARY: leave rssi_chain3 in place for AR900B builds until code using
+ * rssi_chain3 has been converted to use wlan_dbg_rx_rate_info_v2_t.
+ * At that time, this rssi_chain3 field will be deleted.
+ */
+#if defined(AR900B)
+	A_UINT32 rssi_chain3;
+#endif
+} wlan_dbg_rx_rate_info_t ;
+
+typedef struct {
+    A_UINT32 mcs[10];
+    A_UINT32 sgi[10];
+/*
+ * TEMPORARY: leave nss conditionally defined, until all code that
+ * requires nss[4] is converted to use wlan_dbg_tx_rate_info_v2_t.
+ * At that time, this nss array will be made length = 3 unconditionally.
+ */
+#if defined(CONFIG_AR900B_SUPPORT) || defined(AR900B)
+    A_UINT32 nss[4];
+#else
+    A_UINT32 nss[3];
+#endif
+    A_UINT32 stbc[10];
+    A_UINT32 bw[3];
+    A_UINT32 pream[4];
+    A_UINT32 ldpc;
+    A_UINT32 rts_cnt;
+    A_UINT32 ack_rssi;
+} wlan_dbg_tx_rate_info_t ;
+
+#define WLAN_MAX_MCS 10
+
+typedef struct {
+    A_UINT32 mcs[WLAN_MAX_MCS];
+    A_UINT32 sgi[WLAN_MAX_MCS];
+    A_UINT32 nss[MAX_SPATIAL_STREAM_ANY_V2];
+    A_UINT32 nsts;
+    A_UINT32 stbc[WLAN_MAX_MCS];
+    A_UINT32 bw[NUM_DYN_BW_MAX];
+    A_UINT32 pream[6];
+    A_UINT32 ldpc;
+    A_UINT32 txbf;
+    A_UINT32 mgmt_rssi;
+    A_UINT32 data_rssi;
+    A_UINT32 rssi_chain0;
+    A_UINT32 rssi_chain1;
+    A_UINT32 rssi_chain2;
+    A_UINT32 rssi_chain3;
+    A_UINT32 reserved[8];
+} wlan_dbg_rx_rate_info_v2_t;
+
+typedef struct {
+    A_UINT32 mcs[WLAN_MAX_MCS];
+    A_UINT32 sgi[WLAN_MAX_MCS];
+    A_UINT32 nss[MAX_SPATIAL_STREAM_ANY_V2];
+    A_UINT32 stbc[WLAN_MAX_MCS];
+    A_UINT32 bw[NUM_DYN_BW_MAX];
+    A_UINT32 pream[4];
+    A_UINT32 ldpc;
+    A_UINT32 rts_cnt;
+    A_UINT32 ack_rssi;
+    A_UINT32 reserved[8];
+} wlan_dbg_tx_rate_info_v2_t;
+
+typedef struct {
+    A_UINT32 mcs[WLAN_MAX_MCS];
+    A_UINT32 sgi[WLAN_MAX_MCS];
+    A_UINT32 nss[MAX_SPATIAL_STREAM_ANY_V3];
+    A_UINT32 nsts;
+    A_UINT32 stbc[WLAN_MAX_MCS];
+    A_UINT32 bw[NUM_DYN_BW_MAX];
+    A_UINT32 pream[6];
+    A_UINT32 ldpc;
+    A_UINT32 txbf;
+    A_UINT32 mgmt_rssi;
+    A_UINT32 data_rssi;
+    A_UINT32 rssi_chain0;
+    A_UINT32 rssi_chain1;
+    A_UINT32 rssi_chain2;
+    A_UINT32 rssi_chain3;
+    A_UINT32 reserved[8];
+} wlan_dbg_rx_rate_info_v3_t;
+
+typedef struct {
+    A_UINT32 mcs[WLAN_MAX_MCS];
+    A_UINT32 sgi[WLAN_MAX_MCS];
+    A_UINT32 nss[MAX_SPATIAL_STREAM_ANY_V3];
+    A_UINT32 stbc[WLAN_MAX_MCS];
+    A_UINT32 bw[NUM_DYN_BW_MAX];
+    A_UINT32 pream[4];
+    A_UINT32 ldpc;
+    A_UINT32 rts_cnt;
+    A_UINT32 ack_rssi;
+    A_UINT32 reserved[8];
+} wlan_dbg_tx_rate_info_v3_t;
+
+#define WHAL_DBG_PHY_ERR_MAXCNT 18
+#define WHAL_DBG_SIFS_STATUS_MAXCNT 8
+#define WHAL_DBG_SIFS_ERR_MAXCNT 8
+#define WHAL_DBG_CMD_RESULT_MAXCNT 11
+#define WHAL_DBG_CMD_STALL_ERR_MAXCNT 4
+#define WHAL_DBG_FLUSH_REASON_MAXCNT 40
+
+typedef enum {
+    WIFI_URRN_STATS_FIRST_PKT,
+    WIFI_URRN_STATS_BETWEEN_MPDU,
+    WIFI_URRN_STATS_WITHIN_MPDU,
+    WHAL_MAX_URRN_STATS
+} wifi_urrn_type_t;
+
+typedef struct wlan_dbg_txbf_snd_stats {
+    A_UINT32 cbf_20[4];
+    A_UINT32 cbf_40[4];
+    A_UINT32 cbf_80[4];
+    A_UINT32 sounding[9];
+    A_UINT32 cbf_160[4];
+} wlan_dbg_txbf_snd_stats_t;
+
+typedef struct wlan_dbg_wifi2_error_stats {
+    A_UINT32 urrn_stats[WHAL_MAX_URRN_STATS];
+    A_UINT32 flush_errs[WHAL_DBG_FLUSH_REASON_MAXCNT];
+    A_UINT32 schd_stall_errs[WHAL_DBG_CMD_STALL_ERR_MAXCNT];
+    A_UINT32 schd_cmd_result[WHAL_DBG_CMD_RESULT_MAXCNT];
+    A_UINT32 sifs_status[WHAL_DBG_SIFS_STATUS_MAXCNT];
+    A_UINT8  phy_errs[WHAL_DBG_PHY_ERR_MAXCNT];
+    A_UINT32 rx_rate_inval;
+} wlan_dbg_wifi2_error_stats_t;
+
+typedef struct wlan_dbg_wifi2_error2_stats {
+    A_UINT32 schd_errs[WHAL_DBG_CMD_STALL_ERR_MAXCNT];
+    A_UINT32 sifs_errs[WHAL_DBG_SIFS_ERR_MAXCNT];
+} wlan_dbg_wifi2_error2_stats_t;
+
+#define WLAN_DBG_STATS_SIZE_TXBF_VHT 10
+#define WLAN_DBG_STATS_SIZE_TXBF_HT 8
+#define WLAN_DBG_STATS_SIZE_TXBF_OFDM 8
+#define WLAN_DBG_STATS_SIZE_TXBF_CCK 7
+
+typedef struct wlan_dbg_txbf_data_stats {
+    A_UINT32 tx_txbf_vht[WLAN_DBG_STATS_SIZE_TXBF_VHT];
+    A_UINT32 rx_txbf_vht[WLAN_DBG_STATS_SIZE_TXBF_VHT];
+    A_UINT32 tx_txbf_ht[WLAN_DBG_STATS_SIZE_TXBF_HT];
+    A_UINT32 tx_txbf_ofdm[WLAN_DBG_STATS_SIZE_TXBF_OFDM];
+    A_UINT32 tx_txbf_cck[WLAN_DBG_STATS_SIZE_TXBF_CCK];
+} wlan_dbg_txbf_data_stats_t;
+
+struct wlan_dbg_tx_mu_stats {
+    A_UINT32 mu_sch_nusers_2;
+    A_UINT32 mu_sch_nusers_3;
+    A_UINT32 mu_mpdus_queued_usr[4];
+    A_UINT32 mu_mpdus_tried_usr[4];
+    A_UINT32 mu_mpdus_failed_usr[4];
+    A_UINT32 mu_mpdus_requeued_usr[4];
+    A_UINT32 mu_err_no_ba_usr[4];
+    A_UINT32 mu_mpdu_underrun_usr[4];
+    A_UINT32 mu_ampdu_underrun_usr[4];
+};
+
+struct wlan_dbg_tx_selfgen_stats {
+    A_UINT32 su_ndpa;
+    A_UINT32 su_ndp;
+    A_UINT32 mu_ndpa;
+    A_UINT32 mu_ndp;
+    A_UINT32 mu_brpoll_1;
+    A_UINT32 mu_brpoll_2;
+    A_UINT32 mu_bar_1;
+    A_UINT32 mu_bar_2;
+    A_UINT32 cts_burst;
+    A_UINT32 su_ndp_err;
+    A_UINT32 su_ndpa_err;
+    A_UINT32 mu_ndp_err;
+    A_UINT32 mu_brp1_err;
+    A_UINT32 mu_brp2_err;
+};
+
+typedef struct wlan_dbg_sifs_resp_stats {
+    A_UINT32 ps_poll_trigger;       /* num ps-poll trigger frames */
+    A_UINT32 uapsd_trigger;         /* num uapsd trigger frames */
+    A_UINT32 qb_data_trigger[2];    /* num data trigger frames; idx 0: explicit and idx 1: implicit */
+    A_UINT32 qb_bar_trigger[2];     /* num bar trigger frames;  idx 0: explicit and idx 1: implicit */
+    A_UINT32 sifs_resp_data;        /* num ppdus transmitted at SIFS interval */
+    A_UINT32 sifs_resp_err;         /* num ppdus failed to meet SIFS resp timing */
+} wlan_dgb_sifs_resp_stats_t;
+
+
+
+/** wlan_dbg_wifi2_error_stats_t is not grouped with the
+ *  following structure as it is allocated differently and only
+ *  belongs to whal
+ */
+typedef struct wlan_dbg_stats_wifi2 {
+    wlan_dbg_txbf_snd_stats_t txbf_snd_info;
+    wlan_dbg_txbf_data_stats_t txbf_data_info;
+    struct wlan_dbg_tx_selfgen_stats tx_selfgen;
+    struct wlan_dbg_tx_mu_stats tx_mu;
+    wlan_dgb_sifs_resp_stats_t sifs_resp_info;
+} wlan_dbg_wifi2_stats_t;
+
+typedef struct {
+    wlan_dbg_rx_rate_info_t rx_phy_info;
+    wlan_dbg_tx_rate_info_t tx_rate_info;
+} wlan_dbg_rate_info_t;
+
+typedef struct {
+    wlan_dbg_rx_rate_info_v2_t rx_phy_info;
+    wlan_dbg_tx_rate_info_v2_t tx_rate_info;
+} wlan_dbg_rate_info_v2_t;
+
+struct wlan_dbg_stats {
+    struct wlan_dbg_tx_stats tx;
+    struct wlan_dbg_rx_stats rx;
+#if defined(AR900B)
+    struct wlan_dbg_mem_stats mem;
+#endif
+    struct wlan_dbg_peer_stats peer;
+};
+
+#define DBG_STATS_MAX_HWQ_NUM 10
+#define DBG_STATS_MAX_TID_NUM 20
+#define DBG_STATS_MAX_CONG_NUM 16
+struct wlan_dbg_txq_stats {
+    A_UINT16 num_pkts_queued[DBG_STATS_MAX_HWQ_NUM];
+    A_UINT16 tid_hw_qdepth[DBG_STATS_MAX_TID_NUM]; /* WAL_MAX_TID is 20 */
+    A_UINT16 tid_sw_qdepth[DBG_STATS_MAX_TID_NUM]; /* WAL_MAX_TID is 20 */
+};
+
+struct wlan_dbg_tidq_stats{
+    A_UINT32 wlan_dbg_tid_txq_status;
+    struct wlan_dbg_txq_stats txq_st;
+};
+
+#endif /* __WLANDEFS_H__ */

fw/wlan_module_ids.h

@@ -0,0 +1,89 @@
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+#ifndef _WLAN_MODULE_IDS_H_
+#define _WLAN_MODULE_IDS_H_
+
+/* Wlan module ids , global across all the modules */
+typedef enum {
+  WLAN_MODULE_ID_MIN = 0,
+  WLAN_MODULE_INF = WLAN_MODULE_ID_MIN, /* 0x0 */
+  WLAN_MODULE_WMI,                      /* 0x1 */
+  WLAN_MODULE_STA_PWRSAVE,              /* 0x2 */
+  WLAN_MODULE_WHAL,                     /* 0x3 */
+  WLAN_MODULE_COEX,                     /* 0x4 */
+  WLAN_MODULE_ROAM,                     /* 0x5 */
+  WLAN_MODULE_RESMGR_CHAN_MANAGER,      /* 0x6 */
+  WLAN_MODULE_RESMGR,                   /* 0x7 */
+  WLAN_MODULE_VDEV_MGR,                 /* 0x8 */
+  WLAN_MODULE_SCAN,                     /* 0x9 */
+  WLAN_MODULE_RATECTRL,                 /* 0xa */
+  WLAN_MODULE_AP_PWRSAVE,               /* 0xb */
+  WLAN_MODULE_BLOCKACK,                 /* 0xc */
+  WLAN_MODULE_MGMT_TXRX,                /* 0xd */
+  WLAN_MODULE_DATA_TXRX,                /* 0xe */
+  WLAN_MODULE_HTT,                      /* 0xf */
+  WLAN_MODULE_HOST,                     /* 0x10 */
+  WLAN_MODULE_BEACON,                   /* 0x11 */
+  WLAN_MODULE_OFFLOAD,                  /* 0x12 */
+  WLAN_MODULE_WAL,                      /* 0x13 */
+  WAL_MODULE_DE,                        /* 0x14 */
+  WLAN_MODULE_PCIELP,                   /* 0x15 */
+  WLAN_MODULE_RTT,                      /* 0x16 */
+  WLAN_MODULE_RESOURCE,                 /* 0x17 */
+  WLAN_MODULE_DCS,                      /* 0x18 */
+  WLAN_MODULE_CACHEMGR,                 /* 0x19 */
+  WLAN_MODULE_ANI,                      /* 0x1a */
+  WLAN_MODULE_P2P,                      /* 0x1b */
+  WLAN_MODULE_CSA,                      /* 0x1c */
+  WLAN_MODULE_NLO,                      /* 0x1d */
+  WLAN_MODULE_CHATTER,                  /* 0x1e */
+  WLAN_MODULE_WOW,                      /* 0x1f */
+  WLAN_MODULE_WAL_VDEV,                 /* 0x20 */
+  WLAN_MODULE_WAL_PDEV,                 /* 0x21 */
+  WLAN_MODULE_TEST,                     /* 0x22 */
+  WLAN_MODULE_STA_SMPS,                 /* 0x23 */
+  WLAN_MODULE_SWBMISS,                  /* 0x24 */
+  WLAN_MODULE_WMMAC,                    /* 0x25 */
+  WLAN_MODULE_TDLS,                     /* 0x26 */
+  WLAN_MODULE_HB,                       /* 0x27 */
+  WLAN_MODULE_TXBF,                     /* 0x28 */
+  WLAN_MODULE_BATCH_SCAN,               /* 0x29 */
+  WLAN_MODULE_THERMAL_MGR,              /* 0x2a */
+  WLAN_MODULE_PHYERR_DFS,               /* 0x2b */
+  WLAN_MODULE_RMC,                      /* 0x2c */
+  WLAN_MODULE_STATS,                    /* 0x2d */
+  WLAN_MODULE_NAN,                      /* 0x2e */
+  WLAN_MODULE_IBSS_PWRSAVE,             /* 0x2f */
+  WLAN_MODULE_HIF_UART,                 /* 0x30 */
+  WLAN_MODULE_LPI,                      /* 0x31 */
+  WLAN_MODULE_EXTSCAN,                  /* 0x32 */
+  WLAN_MODULE_UNIT_TEST,                /* 0x33 */
+  WLAN_MODULE_MLME,                     /* 0x34 */
+  WLAN_MODULE_SUPPL,                    /* 0x35 */
+  WLAN_MODULE_ERE,                      /* 0x36 */
+  WLAN_MODULE_OCB,                      /* 0x37 */
+  WLAN_MODULE_RSSI_MONITOR,             /* 0x38 */
+  WLAN_MODULE_WPM,                      /* 0x39 */
+  WLAN_MODULE_CSS,                      /* 0x3a */
+  WLAN_MODULE_PPS,                      /* 0x3b */
+  WLAN_MODULE_SCAN_CH_PREDICT,          /* 0x3c */
+  WLAN_MODULE_MAWC,                     /* 0x3d */
+  WLAN_MODULE_CMC_QMIC,                 /* 0x3e */
+  WLAN_MODULE_EGAP,                     /* 0x3f */
+  WLAN_MODULE_NAN20,                    /* 0x40 */
+  WLAN_MODULE_QBOOST,                   /* 0x41 */
+  WLAN_MODULE_P2P_LISTEN_OFFLOAD,       /* 0x42 */
+  WLAN_MODULE_HALPHY,                   /* 0x43 */
+  WAL_MODULE_ENQ,                       /* 0x44 */
+
+  WLAN_MODULE_ID_MAX,
+  WLAN_MODULE_ID_INVALID = WLAN_MODULE_ID_MAX,
+} WLAN_MODULE_ID;
+
+
+#endif /* _WLAN_MODULE_IDS_H_ */

fw/wmi.h

@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2004-2010, 2013-2014, 2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/*
+ * This file contains the definitions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI).  It includes definitions of all the
+ * commands and events. Commands are messages from the host to the WM.
+ * Events and Replies are messages from the WM to the host.
+ *
+ * Ownership of correctness in regards to commands
+ * belongs to the host driver and the WMI is not required to validate
+ * parameters for value, proper range, or any other checking.
+ *
+ */
+
+#ifndef _WMI_H_
+#define _WMI_H_
+
+#include "wlan_defs.h"
+#include "wmix.h"
+#include "wmi_unified.h"
+#include "wmi_tlv_helper.h"
+#include "wmi_tlv_defs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#define HTC_PROTOCOL_VERSION    0x0002
+
+#define WMI_PROTOCOL_VERSION    0x0002
+
+#define WMI_MODE_MAX              8
+#define WMI_MAX_RATE_MASK         6
+
+
+PREPACK struct host_app_area_s {
+    A_UINT32 wmi_protocol_ver;
+} POSTPACK;
+
+
+#undef MS
+#define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
+#undef SM
+#define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
+#undef WO
+#define WO(_f)      ((_f##_OFFSET) >> 2)
+
+#undef GET_FIELD
+#define GET_FIELD(_addr, _f) MS(*((A_UINT32 *)(_addr) + WO(_f)), _f)
+#undef SET_FIELD
+#define SET_FIELD(_addr, _f, _val)  \
+    (*((A_UINT32 *)(_addr) + WO(_f)) = \
+     (*((A_UINT32 *)(_addr) + WO(_f)) & ~_f##_MASK) | SM(_val, _f))
+
+#define WMI_GET_FIELD(_msg_buf, _msg_type, _f) \
+    GET_FIELD(_msg_buf, _msg_type ## _ ## _f)
+
+#define WMI_SET_FIELD(_msg_buf, _msg_type, _f, _val) \
+    SET_FIELD(_msg_buf, _msg_type ## _ ## _f, _val)
+
+#define WMI_EP_APASS WMI_EP_APSS /* TYPO: leave incorrect name as an alias for the correct name */
+#define WMI_EP_APSS            0x0 /* WLAN driver running on apps processor sub-system */
+#define WMI_EP_LPASS           0x1
+#define WMI_EP_SENSOR          0x2
+#define WMI_EP_NANOHUB         0x3 /* WLAN driver running on NANO Hub */
+#define WMI_EP_MODEM           0x4
+#define WMI_EP_LOCATION        0x5
+
+/*
+ * Control Path
+ */
+typedef PREPACK struct {
+    A_UINT32    commandId : 24,
+                reserved  : 2, /* used for WMI endpoint ID */
+                plt_priv  : 6; /* platform private */
+} POSTPACK WMI_CMD_HDR;        /* used for commands and events */
+
+#define WMI_CMD_HDR_COMMANDID_LSB           0
+#define WMI_CMD_HDR_COMMANDID_MASK          0x00ffffff
+#define WMI_CMD_HDR_COMMANDID_OFFSET        0x00000000
+#define WMI_CMD_HDR_WMI_ENDPOINTID_MASK        0x03000000
+#define WMI_CMD_HDR_WMI_ENDPOINTID_OFFSET      24
+#define WMI_CMD_HDR_PLT_PRIV_LSB               24
+#define WMI_CMD_HDR_PLT_PRIV_MASK              0xff000000
+#define WMI_CMD_HDR_PLT_PRIV_OFFSET            0x00000000
+
+/*
+ * List of Commnands
+ */
+typedef enum {
+    WMI_EXTENSION_CMDID,                     //used in wmi_svc.c   /* Non-wireless extensions */
+    WMI_IGNORE_CMDID,				//used in wlan_wmi.c
+} WMI_COMMAND_ID;
+
+
+typedef enum {
+    NONE_CRYPT          = 0x01,
+    WEP_CRYPT           = 0x02,
+    TKIP_CRYPT          = 0x04,
+    AES_CRYPT           = 0x08,
+#ifdef WAPI_ENABLE
+    WAPI_CRYPT          = 0x10,
+#endif /*WAPI_ENABLE*/
+} CRYPTO_TYPE;
+
+#define WMI_MAX_SSID_LEN    32
+
+/*
+ * WMI_SET_PMK_CMDID
+ */
+#define WMI_PMK_LEN     32
+
+
+/*
+ * WMI_ADD_CIPHER_KEY_CMDID
+ */
+typedef enum {
+    PAIRWISE_USAGE      = 0x00,
+    GROUP_USAGE         = 0x01,
+    TX_USAGE            = 0x02,     /* default Tx Key - Static WEP only */
+} KEY_USAGE;
+/*
+ * List of Events (target to host)
+ */
+typedef enum {
+    WMI_EXTENSION_EVENTID			//wmi_profhook.c and umac_wmi_events.c
+} WMI_EVENT_ID;
+
+typedef enum {
+    WMI_11A_CAPABILITY   = 1,
+    WMI_11G_CAPABILITY   = 2,
+    WMI_11AG_CAPABILITY  = 3,
+    WMI_11NA_CAPABILITY  = 4,
+    WMI_11NG_CAPABILITY  = 5,
+    WMI_11NAG_CAPABILITY = 6,
+    WMI_11AC_CAPABILITY  = 7,
+    WMI_11AX_CAPABILITY  = 8,
+    // END CAPABILITY
+    WMI_11N_CAPABILITY_OFFSET = (WMI_11NA_CAPABILITY - WMI_11A_CAPABILITY),
+} WMI_PHY_CAPABILITY;
+
+
+/* Deprectated, need clean up */
+#define WMI_MAX_RX_META_SZ  (12)
+
+typedef PREPACK struct {
+    A_INT8      rssi;
+    A_UINT8     info;               /* usage of 'info' field(8-bit):
+                                     *  b1:b0       - WMI_MSG_TYPE
+                                     *  b4:b3:b2    - UP(tid)
+                                     *  b5          - Used in AP mode. More-data in tx dir, PS in rx.
+                                     *  b7:b6       -  Dot3 header(0),
+                                     *                 Dot11 Header(1),
+                                     *                 ACL data(2)
+                                     */
+
+    A_UINT16    info2;              /* usage of 'info2' field(16-bit):
+                                     * b11:b0       - seq_no
+                                     * b12          - A-MSDU?
+                                     * b15:b13      - META_DATA_VERSION 0 - 7
+                                     */
+    A_UINT16    info3;              /* b3:b2:b1:b0  - device id
+                                     * b4           - Used in AP mode. uAPSD trigger in rx, EOSP in tx
+                                     * b7:b5        - unused?
+                                     * b15:b8       - pad before data start(irrespective of meta version)
+                                     */
+} POSTPACK WMI_DATA_HDR;
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_H_ */

fw/wmi_services.h

@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2011-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/**
+ * This file defines WMI services bitmap and the set of WMI services .
+ * defines macrso to set/clear/get different service bits from the bitmap.
+ * the service bitmap is sent up to the host via WMI_READY command.
+ *
+ */
+
+#ifndef _WMI_SERVICES_H_
+#define _WMI_SERVICES_H_
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+
+typedef  enum  {
+    WMI_SERVICE_BEACON_OFFLOAD=0,           /* beacon offload */
+    WMI_SERVICE_SCAN_OFFLOAD=1,             /* scan offload */
+    WMI_SERVICE_ROAM_SCAN_OFFLOAD=2,        /* roam scan offload */
+    WMI_SERVICE_BCN_MISS_OFFLOAD=3,         /* beacon miss offload */
+    WMI_SERVICE_STA_PWRSAVE=4,              /* fake sleep + basic power save */
+    WMI_SERVICE_STA_ADVANCED_PWRSAVE=5,     /* uapsd, pspoll, force sleep */
+    WMI_SERVICE_AP_UAPSD=6,                 /* uapsd on AP */
+    WMI_SERVICE_AP_DFS=7,                   /* DFS on AP */
+    WMI_SERVICE_11AC=8,                     /* supports 11ac */
+    WMI_SERVICE_BLOCKACK=9,                 /* Supports triggering ADDBA/DELBA from host*/
+    WMI_SERVICE_PHYERR=10,                  /* PHY error */
+    WMI_SERVICE_BCN_FILTER=11,              /* Beacon filter support */
+    WMI_SERVICE_RTT=12,                     /* RTT (round trip time) support */
+    WMI_SERVICE_WOW=13,                     /* WOW Support */
+    WMI_SERVICE_RATECTRL_CACHE=14,          /* Rate-control caching */
+    WMI_SERVICE_IRAM_TIDS=15,               /* TIDs in IRAM */
+    WMI_SERVICE_ARPNS_OFFLOAD=16,           /* ARP NS Offload support for STA vdev */
+    WMI_SERVICE_NLO=17,                     /* Network list offload service */
+    WMI_SERVICE_GTK_OFFLOAD=18,             /* GTK offload */
+    WMI_SERVICE_SCAN_SCH=19,                /* Scan Scheduler Service */
+    WMI_SERVICE_CSA_OFFLOAD=20,             /* CSA offload service */
+    WMI_SERVICE_CHATTER=21,                 /* Chatter service */
+    WMI_SERVICE_COEX_FREQAVOID=22,          /* FW report freq range to avoid */
+    WMI_SERVICE_PACKET_POWER_SAVE=23,       /* packet power save service */
+    WMI_SERVICE_FORCE_FW_HANG=24,           /* Service to test the firmware recovery mechanism */
+    WMI_SERVICE_GPIO=25,                    /* GPIO service */
+    WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM=26, /* Modulated DTIM support */
+    WMI_STA_UAPSD_BASIC_AUTO_TRIG=27,       /* Basic version of station UAPSD AC Trigger Generation Method with
+                                             * variable tigger periods (service, delay, and suspend intervals) */
+    WMI_STA_UAPSD_VAR_AUTO_TRIG=28,         /* Station UAPSD AC Trigger Generation Method with variable
+                                             * trigger periods (service, delay, and suspend intervals) */
+    WMI_SERVICE_STA_KEEP_ALIVE=29,          /* Serivce to support the STA KEEP ALIVE mechanism */
+    WMI_SERVICE_TX_ENCAP=30,                /* Packet type for TX encapsulation */
+    WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC=31, /* detect out-of-sync sleeping stations */
+    WMI_SERVICE_EARLY_RX=32,                /* adaptive early-rx feature */
+    WMI_SERVICE_STA_SMPS=33,                /* STA MIMO-PS */
+    WMI_SERVICE_FWTEST=34,                  /* Firmware test service */
+    WMI_SERVICE_STA_WMMAC=35,               /* STA WMMAC */
+    WMI_SERVICE_TDLS=36,                    /* TDLS support */
+    WMI_SERVICE_BURST=37,                   /* SIFS spaced burst support */
+    WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE=38, /* Dynamic beaocn interval change for SAP/P2p GO in MCC scenario */
+    WMI_SERVICE_ADAPTIVE_OCS=39,            /* Service to support adaptive off-channel scheduler */
+    WMI_SERVICE_BA_SSN_SUPPORT=40,          /* target will provide Sequence number for the peer/tid combo */
+    WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE=41,
+    WMI_SERVICE_WLAN_HB=42,                 /* wlan HB service */
+    WMI_SERVICE_LTE_ANT_SHARE_SUPPORT=43,   /* support LTE/WLAN antenna sharing */
+    WMI_SERVICE_BATCH_SCAN=44,              /* Service to support batch scan */
+    WMI_SERVICE_QPOWER=45,                  /* QPower service */
+    WMI_SERVICE_PLMREQ=46,
+    WMI_SERVICE_THERMAL_MGMT=47,            /* thermal throttling support */
+    WMI_SERVICE_RMC=48,                     /* RMC support */
+    WMI_SERVICE_MHF_OFFLOAD=49,             /* multi-hop forwarding offload */
+    WMI_SERVICE_COEX_SAR=50,                /* target support SAR tx limit from WMI_PDEV_PARAM_TXPOWER_LIMITxG */
+    WMI_SERVICE_BCN_TXRATE_OVERRIDE=51,     /* Will support the bcn/prb rsp rate override */
+    WMI_SERVICE_NAN=52,                     /* Neighbor Awareness Network */
+    WMI_SERVICE_L1SS_STAT=53,               /* L1SS statistics counter report */
+    WMI_SERVICE_ESTIMATE_LINKSPEED=54,      /* Linkspeed Estimation per peer */
+    WMI_SERVICE_OBSS_SCAN=55,               /* Service to support OBSS scan */
+    WMI_SERVICE_TDLS_OFFCHAN=56,            /* TDLS off channel support */
+    WMI_SERVICE_TDLS_UAPSD_BUFFER_STA=57,   /* TDLS UAPSD Buffer STA support */
+    WMI_SERVICE_TDLS_UAPSD_SLEEP_STA=58,    /* TDLS UAPSD Sleep STA support */
+    WMI_SERVICE_IBSS_PWRSAVE=59,            /* IBSS power save support */
+    WMI_SERVICE_LPASS=60,                   /* Service to support LPASS */
+    WMI_SERVICE_EXTSCAN=61,                 /* Extended Scans */
+    WMI_SERVICE_D0WOW=62,                   /* D0-WOW Support */
+    WMI_SERVICE_HSOFFLOAD=63,               /* Hotspot offload feature Support */
+    WMI_SERVICE_ROAM_HO_OFFLOAD=64,         /* roam handover offload */
+    WMI_SERVICE_RX_FULL_REORDER=65,         /* target-based Rx full reorder */
+    WMI_SERVICE_DHCP_OFFLOAD=66,            /* DHCP offload support */
+    WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT=67, /* STA RX DATA offload to IPA support */
+    WMI_SERVICE_MDNS_OFFLOAD=68,            /* mDNS responder offload support */
+    WMI_SERVICE_SAP_AUTH_OFFLOAD=69,        /* softap auth offload */
+    WMI_SERVICE_DUAL_BAND_SIMULTANEOUS_SUPPORT=70, /* Dual Band Simultaneous support */
+    WMI_SERVICE_OCB=71,                     /* OCB mode support */
+    WMI_SERVICE_AP_ARPNS_OFFLOAD=72,        /* arp offload support for ap mode vdev */
+    WMI_SERVICE_PER_BAND_CHAINMASK_SUPPORT=73, /* Per band chainmask support */
+    WMI_SERVICE_PACKET_FILTER_OFFLOAD=74,   /* Per vdev packet filters */
+    WMI_SERVICE_MGMT_TX_HTT=75,             /* Mgmt Tx via HTT interface */
+    WMI_SERVICE_MGMT_TX_WMI=76,             /* Mgmt Tx via WMI interface */
+    WMI_SERVICE_EXT_MSG=77,                 /* WMI_SERVICE_READY_EXT msg follows */
+    WMI_SERVICE_MAWC=78,                    /* Motion Aided WiFi Connectivity (MAWC)*/
+    WMI_SERVICE_PEER_ASSOC_CONF=79,         /* target will send ASSOC_CONF after ASSOC_CMD is processed */
+    WMI_SERVICE_EGAP=80,                    /* enhanced green ap support */
+    WMI_SERVICE_STA_PMF_OFFLOAD=81,         /* FW supports 11W PMF Offload for STA */
+    WMI_SERVICE_UNIFIED_WOW_CAPABILITY=82,  /* FW supports unified D0 and D3 wow */
+    WMI_SERVICE_ENHANCED_PROXY_STA=83,      /* Enhanced ProxySTA mode support */
+    WMI_SERVICE_ATF=84,                     /* Air Time Fairness support */
+    WMI_SERVICE_COEX_GPIO=85,               /* BTCOEX GPIO support */
+    WMI_SERVICE_AUX_SPECTRAL_INTF=86,       /* Aux Radio enhancement support for ignoring spectral scan intf from main radios */
+    WMI_SERVICE_AUX_CHAN_LOAD_INTF=87,      /* Aux Radio enhancement support for ignoring chan load intf from main radios*/
+    WMI_SERVICE_BSS_CHANNEL_INFO_64=88,     /* BSS channel info (freq, noise floor, 64-bit counters) event support */
+    WMI_SERVICE_ENTERPRISE_MESH=89,         /* Enterprise MESH Service Support */
+    WMI_SERVICE_RESTRT_CHNL_SUPPORT=90,     /* Restricted Channel Support */
+    WMI_SERVICE_BPF_OFFLOAD=91,             /* FW supports bpf offload */
+    WMI_SERVICE_SYNC_DELETE_CMDS=92,        /* FW sends response event for Peer, Vdev delete commands */
+    WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT=93,
+    WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT=94,
+    WMI_SERVICE_RATECTRL_LIMIT_MAX_MIN_RATES=95, /* allow per-peer tx MCS min/max limits by host */
+    WMI_SERVICE_NAN_DATA=96,                /* FW supports NAN data */
+    WMI_SERVICE_NAN_RTT=97,                 /* FW supports NAN RTT */
+    WMI_SERVICE_11AX=98,                    /* FW supports 802.11ax */
+    /* WMI_SERVICE_DEPRECATED_REPLACE
+     * FW supports these new WMI commands, to be used rather than
+     * deprecated matching commands:
+     * - WMI_PDEV_SET_PCL_CMDID          (vs. WMI_SOC_SET_PCL_CMDID)
+     * - WMI_PDEV_SET_HW_MODE_CMDID      (vs. WMI_SOC_SET_HW_MODE_CMDID)
+     * - WMI_PDEV_SET_MAC_CONFIG_CMDID   (vs. WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID)
+     * - WMI_PDEV_SET_ANTENNA_MODE_CMDID (vs. WMI_SOC_SET_ANTENNA_MODE_CMDID)
+     * - WMI_VDEV_SET_DSCP_TID_MAP_CMDID (vs. WMI_VDEV_SET_WMM_PARAMS_CMDID)
+     */
+    WMI_SERVICE_DEPRECATED_REPLACE=99,
+    WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE=100, /* FW supports a new mode that allows to run connection tracker in host */
+    WMI_SERVICE_ENHANCED_MCAST_FILTER=101,  /* FW supports enhanced multicast filtering (of mcast IP inside ucast WLAN) */
+    WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT=102, /* periodic channel stats service */
+    WMI_SERVICE_MESH_11S=103,               /* 11s mesh service support */
+    WMI_SERVICE_HALF_RATE_QUARTER_RATE_SUPPORT=104, /* FW+HW supports 10 MHz (half rate) and 5 MHz (quarter rate) channel bandwidth */
+    WMI_SERVICE_VDEV_RX_FILTER=105,         /* Support per-vdev specs of which rx frames to filter out */
+    WMI_SERVICE_P2P_LISTEN_OFFLOAD_SUPPORT=106,
+    WMI_SERVICE_MARK_FIRST_WAKEUP_PACKET=107, /* FW supports marking the first data packet which wakes the host from suspend */
+    WMI_SERVICE_MULTIPLE_MCAST_FILTER_SET=108, /* FW supports command that can add/delete multiple mcast filters */
+    /* WMI_SERVICE_HOST_MANAGED_RX_REORDER -
+     * FW supports host-managed RX reorder.
+     * Host managed RX reorder involves RX BA state machine handling
+     * on peer/TID basis, REO configuration for HW based reordering/PN
+     * check and processing reorder exceptions generated by HW.
+     */
+    WMI_SERVICE_HOST_MANAGED_RX_REORDER=109,
+    /* Specify whether the target supports the following WMI messages for
+     * reading / writing its flash memory:
+     *     WMI_READ_DATA_FROM_FLASH_CMDID,
+     *     WMI_READ_DATA_FROM_FLASH_EVENTID,
+     *     WMI_TRANSFER_DATA_TO_FLASH_CMDID,
+     *     WMI_TRANSFER_DATA_TO_FLASH_COMPLETE_EVENTID,
+     */
+    WMI_SERVICE_FLASH_RDWR_SUPPORT=110,
+    WMI_SERVICE_WLAN_STATS_REPORT=111, /* support WLAN stats report */
+
+
+    /******* ADD NEW SERVICES HERE UNTIL ALL VALUES UP TO 128 ARE USED *******/
+
+    WMI_MAX_SERVICE=128, /* max service */
+
+    /* NOTE:
+     * The above service flags are delivered in the wmi_service_bitmap field
+     * of the WMI_SERVICE_READY_EVENT message.
+     * The below service flags are delivered in a WMI_SERVICE_AVAILABLE_EVENT
+     * message rather than in the WMI_SERVICE_READY_EVENT message's
+     * wmi_service_bitmap field.
+     * The WMI_SERVICE_AVAILABLE_EVENT message immediately precedes the
+     * WMI_SERVICE_READY_EVENT message.
+     */
+
+    /*PUT 1ST EXT SERVICE HERE:*//*WMI_SERVICE_xxxxxxxx=128,*/
+    /*PUT 2ND EXT SERVICE HERE:*//*WMI_SERVICE_yyyyyyyy=129,*/
+
+    WMI_MAX_EXT_SERVICE
+
+} WMI_SERVICE;
+
+#define WMI_SERVICE_BM_SIZE   ((WMI_MAX_SERVICE + sizeof(A_UINT32)- 1)/sizeof(A_UINT32))
+
+#define WMI_NUM_EXT_SERVICES (WMI_MAX_EXT_SERVICE - WMI_MAX_SERVICE)
+#define WMI_SERVICE_EXT_BM_SIZE32 ((WMI_NUM_EXT_SERVICES + 31) / 32)
+
+#define WMI_SERVICE_ROAM_OFFLOAD WMI_SERVICE_ROAM_SCAN_OFFLOAD /* depreciated the name WMI_SERVICE_ROAM_OFFLOAD, but here to help compiling with old host driver */
+
+/*
+ * turn on the WMI service bit corresponding to  the WMI service.
+ */
+#define WMI_SERVICE_ENABLE(pwmi_svc_bmap,svc_id) \
+    ( (pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] |= \
+         (1 << ((svc_id)%(sizeof(A_UINT32)))) )
+
+#define WMI_SERVICE_DISABLE(pwmi_svc_bmap,svc_id) \
+    ( (pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] &=  \
+      ( ~(1 << ((svc_id)%(sizeof(A_UINT32)))) ) )
+
+#define WMI_SERVICE_IS_ENABLED(pwmi_svc_bmap,svc_id) \
+    ( ((pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] &  \
+       (1 << ((svc_id)%(sizeof(A_UINT32)))) ) != 0)
+
+
+#define WMI_SERVICE_EXT_ENABLE(pwmi_svc_bmap, pwmi_svc_ext_bmap, svc_id) \
+    do { \
+        if (svc_id < WMI_MAX_SERVICE) { \
+            WMI_SERVICE_ENABLE(pwmi_svc_bmap, svc_id); \
+        } else { \
+            int word = ((svc_id) - WMI_MAX_SERVICE) / 32; \
+            int bit = (svc_id) & 0x1f; /* svc_id mod 32 */ \
+            (pwmi_svc_ext_bmap)[word] |= (1 << bit); \
+        } \
+    } while (0)
+
+#define WMI_SERVICE_EXT_DISABLE(pwmi_svc_bmap, pwmi_svc_ext_bmap, svc_id) \
+    do { \
+        if (svc_id < WMI_MAX_SERVICE) { \
+            WMI_SERVICE_DISABLE(pwmi_svc_bmap, svc_id); \
+        } else { \
+            int word = ((svc_id) - WMI_MAX_SERVICE) / 32; \
+            int bit = (svc_id) & 0x1f; /* svc_id mod 32 */ \
+            (pwmi_svc_ext_bmap)[word] &= ~(1 << bit); \
+        } \
+    } while (0)
+
+#define WMI_SERVICE_EXT_IS_ENABLED(pwmi_svc_bmap, pwmi_svc_ext_bmap, svc_id) \
+    /* If the service ID is beyond the known limit, treat it as disabled */ \
+    ((svc_id) >= WMI_MAX_EXT_SERVICE ? 0 : \
+        /* If service ID is in the non-extension range, use the old check */ \
+        (svc_id) < WMI_MAX_SERVICE ? \
+            WMI_SERVICE_IS_ENABLED(pwmi_svc_bmap, svc_id) : \
+            /* If service ID is in the extended range, check ext_bmap */ \
+            (pwmi_svc_ext_bmap)[((svc_id) - WMI_MAX_SERVICE) / 32] >> \
+                ((svc_id) & 0x1f))
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*_WMI_SERVICES_H_*/

fw/wmi_tlv_defs.h

@@ -0,0 +1,4032 @@
+/*
+ * Copyright (c) 2013-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+#ifndef _WMI_TLV_DEFS_H_
+#define _WMI_TLV_DEFS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define WMITLV_FIELD_BUF_IS_ALLOCATED(elem_name) \
+       is_allocated_##elem_name
+
+#define WMITLV_FIELD_NUM_OF(elem_name) \
+       num_##elem_name
+
+/* Define the structure typedef for the TLV parameters of each cmd/event */
+#define WMITLV_TYPEDEF_STRUCT_PARAMS_TLVS(wmi_cmd_event_id) \
+       wmi_cmd_event_id##_param_tlvs
+
+/*
+ * The following macro WMITLV_OP_* are created by the macro WMITLV_ELEM().
+ */
+/* macro to define the TLV name in the correct order. When (op==TAG_ORDER) */
+#define WMITLV_OP_TAG_ORDER_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size)  \
+      wmi_cmd_event_id##_tlv_order_##elem_name,
+
+/* macro to define the TLV name with the TLV Tag value. When (op==TAG_ID) */
+#define WMITLV_OP_TAG_ID_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size)  \
+      wmi_cmd_event_id##_tlv_tag_##elem_name = elem_tlv_tag,
+
+/* macro to define the TLV name with the TLV structure size. May not be accurate when variable length. When (op==TAG_SIZEOF) */
+#define WMITLV_OP_TAG_SIZEOF_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size)  \
+      wmi_cmd_event_id##_sizeof_##elem_name = sizeof(elem_struc_type),
+
+/* macro to define the TLV name with value indicating whether the TLV is variable length. When (op==TAG_VAR_SIZED) */
+#define WMITLV_OP_TAG_VAR_SIZED_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size)  \
+      wmi_cmd_event_id##_var_sized_##elem_name = var_len,
+
+/* macro to define the TLV name with value indicating the fixed array size. When (op==TAG_ARR_SIZE) */
+#define WMITLV_OP_TAG_ARR_SIZE_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size)  \
+      wmi_cmd_event_id##_arr_size_##elem_name = arr_size,
+
+/*
+ * macro to define afew fields associated to a TLV. For example, a structure pointer with the TLV name.
+ * This macro is expand from WMITLV_ELEM(op) when (op==STRUCT_FIELD).
+ * NOTE: If this macro is changed, then "mirror" structure wmitlv_cmd_param_info
+ * should be updated too.
+ */
+#define WMITLV_OP_STRUCT_FIELD_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size)  \
+      elem_struc_type *elem_name; \
+      A_UINT32 WMITLV_FIELD_NUM_OF(elem_name); \
+      A_UINT32 WMITLV_FIELD_BUF_IS_ALLOCATED(elem_name);
+
+/*
+ * A "mirror" structure that contains the fields that is created by the
+ * macro WMITLV_OP_STRUCT_FIELD_macro.
+ * NOTE: you should modify this structure and WMITLV_OP_STRUCT_FIELD_macro
+ * so that they both has the same kind of fields.
+ */
+typedef struct {
+    void *tlv_ptr;            /* Pointer to the TLV Buffer. But the "real" one will have the right type instead of void. */
+    A_UINT32 num_elements;    /* Number of elements. For non-array, this is one. For array, this is the number of elements. */
+    A_UINT32 buf_is_allocated;/* Boolean flag to indicate that a new buffer is allocated for this TLV. */
+} wmitlv_cmd_param_info;
+
+/*
+ * NOTE TRICKY MACRO:
+ *  WMITLV_ELEM is re-defined to a "op" specific macro.
+ *  Eg. WMITLV_OP_TAG_ORDER_macro is created for the op_type=TAG_ORDER.
+ */
+#define WMITLV_ELEM(wmi_cmd_event_id, op_type, param_ptr, param_len, elem_tlv_tag, elem_struc_type, elem_name, var_len) \
+    WMITLV_OP_##op_type##_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, WMITLV_ARR_SIZE_INVALID)
+/*
+ *  WMITLV_FXAR (FiX ARray) is similar to WMITLV_ELEM except it has an extra parameter for the fixed number of elements.
+ *  It is re-defined to a "op" specific macro.
+ *  Eg. WMITLV_OP_TAG_ORDER_macro is created for the op_type=TAG_ORDER.
+ */
+#define WMITLV_FXAR(wmi_cmd_event_id, op_type, param_ptr, param_len, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size) \
+    WMITLV_OP_##op_type##_macro(param_ptr, param_len, wmi_cmd_event_id, elem_tlv_tag, elem_struc_type, elem_name, var_len, arr_size)
+
+#define WMITLV_TABLE(id,op,buf,len) WMITLV_TABLE_##id(id,op,buf,len)
+
+/*
+ * This macro will create various enumerations and structures to describe the TLVs for
+ * the given Command/Event ID.
+ *
+ * For example, the following is for WMI_SERVICE_READY_EVENTID:
+ *    #define WMITLV_TABLE_WMI_SERVICE_READY_EVENTID(id,op,buf,len)                                                                                                 \
+ *       WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_service_ready_event_fixed_param, wmi_service_ready_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)     \
+ *       WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_HAL_REG_CAPABILITIES, HAL_REG_CAPABILITIES, hal_reg_capabilities, WMITLV_SIZE_FIX)  \
+ *       WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, wmi_service_bitmap, WMITLV_SIZE_FIX, WMI_SERVICE_BM_SIZE) \
+ *       WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wlan_host_mem_req, mem_reqs, WMITLV_SIZE_VAR)
+ *    WMITLV_CREATE_PARAM_STRUC(WMI_SERVICE_READY_EVENTID);
+ * This macro will create the following text:
+ *
+ * typedef enum {
+ *    WMI_SERVICE_READY_EVENTID_tlv_order_wmi_service_ready_event_fixed_param,
+ *    WMI_SERVICE_READY_EVENTID_tlv_order_hal_reg_capabilities,
+ *    WMI_SERVICE_READY_EVENTID_tlv_order_wmi_service_bitmap,
+ *    WMI_SERVICE_READY_EVENTID_tlv_order_mem_reqs,
+ *    WMI_TLV_HLPR_NUM_TLVS_FOR_WMI_SERVICE_READY_EVENTID
+ * } WMI_SERVICE_READY_EVENTID_TAG_ID_enum_type;
+ * //NOTE: WMI_TLV_HLPR_NUM_TLVS_FOR_WMI_SERVICE_READY_EVENTID is the number of TLVs.
+ *
+ * typedef enum {
+ *    WMI_SERVICE_READY_EVENTID_tlv_tag_wmi_service_ready_event_fixed_param = WMITLV_TAG_STRUC_wmi_service_ready_event_fixed_param,
+ *    WMI_SERVICE_READY_EVENTID_tlv_tag_hal_reg_capabilities = WMITLV_TAG_STRUC_HAL_REG_CAPABILITIES,
+ *    WMI_SERVICE_READY_EVENTID_tlv_tag_wmi_service_bitmap = WMITLV_TAG_ARRAY_UINT32,
+ *    WMI_SERVICE_READY_EVENTID_tlv_tag_mem_reqs = WMITLV_TAG_ARRAY_STRUC,
+ * } WMI_SERVICE_READY_EVENTID_TAG_ORDER_enum_type;
+ *
+ * typedef enum {
+ *    WMI_SERVICE_READY_EVENTID_sizeof_wmi_service_ready_event_fixed_param = sizeof(wmi_service_ready_event_fixed_param),
+ *    WMI_SERVICE_READY_EVENTID_sizeof_hal_reg_capabilities = sizeof(HAL_REG_CAPABILITIES),
+ *    WMI_SERVICE_READY_EVENTID_sizeof_wmi_service_bitmap = sizeof(A_UINT32),
+ *    WMI_SERVICE_READY_EVENTID_sizeof_mem_reqs = sizeof(wlan_host_mem_req),
+ * } WMI_SERVICE_READY_EVENTID_TAG_SIZEOF_enum_type;
+ *
+ * typedef enum {
+ *    WMI_SERVICE_READY_EVENTID_var_sized_wmi_service_ready_event_fixed_param = WMITLV_SIZE_FIX,
+ *    WMI_SERVICE_READY_EVENTID_var_sized_hal_reg_capabilities = WMITLV_SIZE_FIX,
+ *    WMI_SERVICE_READY_EVENTID_var_sized_wmi_service_bitmap = WMITLV_SIZE_VAR,
+ *    WMI_SERVICE_READY_EVENTID_var_sized_mem_reqs = WMITLV_SIZE_VAR,
+ * } WMI_SERVICE_READY_EVENTID_TAG_VAR_SIZED_enum_type;
+ *
+ * typedef enum {
+ *    WMI_SERVICE_READY_EVENTID_arr_size_wmi_service_ready_event_fixed_param = WMITLV_ARR_SIZE_INVALID,
+ *    WMI_SERVICE_READY_EVENTID_arr_size_hal_reg_capabilities = WMITLV_ARR_SIZE_INVALID,
+ *    WMI_SERVICE_READY_EVENTID_arr_size_wmi_service_bitmap = WMI_SERVICE_BM_SIZE,
+ *    WMI_SERVICE_READY_EVENTID_arr_size_mem_reqs = WMITLV_ARR_SIZE_INVALID,
+ * } WMI_SERVICE_READY_EVENTID_TAG_ARR_SIZE_enum_type;
+ *
+ * typedef struct {
+ *    wmi_service_ready_event_fixed_param *fixed_param;
+ *    A_UINT32 num_fixed_param;
+ *    A_UINT32 is_allocated_fixed_param;
+ *    HAL_REG_CAPABILITIES *hal_reg_capabilities;
+ *    A_UINT32 num_hal_reg_capabilities;
+ *    A_UINT32 is_allocated_hal_reg_capabilities;
+ *    A_UINT32 *wmi_service_bitmap;
+ *    A_UINT32 num_wmi_service_bitmap;
+ *    A_UINT32 is_allocated_wmi_service_bitmap;
+ *    wlan_host_mem_req *mem_reqs;
+ *    A_UINT32 num_mem_reqs;
+ *    A_UINT32 is_allocated_mem_reqs;
+ *
+ * } WMI_SERVICE_READY_EVENTID_param_tlvs;
+ *
+ */
+
+#define WMITLV_CREATE_PARAM_STRUC(wmi_cmd_event_id)            \
+    typedef enum {                                             \
+        WMITLV_TABLE(wmi_cmd_event_id, TAG_ORDER, NULL, 0)     \
+        WMI_TLV_HLPR_NUM_TLVS_FOR_##wmi_cmd_event_id           \
+    } wmi_cmd_event_id##_TAG_ORDER_enum_type;                  \
+                                                               \
+    typedef struct {                                           \
+        WMITLV_TABLE(wmi_cmd_event_id, STRUCT_FIELD, NULL, 0)  \
+    } WMITLV_TYPEDEF_STRUCT_PARAMS_TLVS(wmi_cmd_event_id);     \
+
+/** Enum list of TLV Tags for each parameter structure type. */
+typedef enum {
+    /* 0 to 15 is reserved */
+    WMITLV_TAG_LAST_RESERVED = 15,
+    WMITLV_TAG_FIRST_ARRAY_ENUM, /* First entry of ARRAY type tags */
+    WMITLV_TAG_ARRAY_UINT32 = WMITLV_TAG_FIRST_ARRAY_ENUM,
+    WMITLV_TAG_ARRAY_BYTE,
+    WMITLV_TAG_ARRAY_STRUC,
+    WMITLV_TAG_ARRAY_FIXED_STRUC,
+    WMITLV_TAG_LAST_ARRAY_ENUM = 31,   /* Last entry of ARRAY type tags */
+    WMITLV_TAG_STRUC_wmi_service_ready_event_fixed_param,
+    WMITLV_TAG_STRUC_HAL_REG_CAPABILITIES,
+    WMITLV_TAG_STRUC_wlan_host_mem_req,
+    WMITLV_TAG_STRUC_wmi_ready_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_scan_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_tpc_config_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chan_info_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_comb_phyerr_rx_hdr,
+    WMITLV_TAG_STRUC_wmi_vdev_start_response_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_stopped_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_install_key_complete_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_sta_kickout_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mgmt_rx_hdr,
+    WMITLV_TAG_STRUC_wmi_tbtt_offset_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tx_delba_complete_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tx_addba_complete_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_event_fixed_param,
+    WMITLV_TAG_STRUC_WOW_EVENT_INFO_fixed_param,
+    WMITLV_TAG_STRUC_WOW_EVENT_INFO_SECTION_BITMAP,
+    WMITLV_TAG_STRUC_wmi_rtt_event_header,
+    WMITLV_TAG_STRUC_wmi_rtt_error_report_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rtt_meas_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_echo_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ftm_intg_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_gpio_input_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_csa_event_fixed_param,
+    WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param,
+    WMITLV_TAG_STRUC_wmi_igtk_info,
+    WMITLV_TAG_STRUC_wmi_dcs_interference_event_fixed_param,
+    WMITLV_TAG_STRUC_ath_dcs_cw_int, /* DEPRECATED */
+    WMITLV_TAG_STRUC_wlan_dcs_cw_int = /* alias */
+        WMITLV_TAG_STRUC_ath_dcs_cw_int,
+    WMITLV_TAG_STRUC_ath_dcs_wlan_int_stat, /* DEPRECATED */
+    WMITLV_TAG_STRUC_wlan_dcs_im_tgt_stats_t = /* alias */
+        WMITLV_TAG_STRUC_ath_dcs_wlan_int_stat,
+    WMITLV_TAG_STRUC_wmi_wlan_profile_ctx_t,
+    WMITLV_TAG_STRUC_wmi_wlan_profile_t,
+    WMITLV_TAG_STRUC_wmi_pdev_qvit_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_host_swba_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tim_info,
+    WMITLV_TAG_STRUC_wmi_p2p_noa_info,
+    WMITLV_TAG_STRUC_wmi_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_avoid_freq_ranges_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_avoid_freq_range_desc,
+    WMITLV_TAG_STRUC_wmi_gtk_rekey_fail_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_init_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_resource_config,
+    WMITLV_TAG_STRUC_wlan_host_memory_chunk,
+    WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_scan_chan_list_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_channel,
+    WMITLV_TAG_STRUC_wmi_pdev_set_regdomain_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_wmm_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wmm_params,
+    WMITLV_TAG_STRUC_wmi_pdev_set_quiet_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_create_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_delete_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_p2p_noa_descriptor,
+    WMITLV_TAG_STRUC_wmi_p2p_go_set_beacon_ie_fixed_param,
+    WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_up_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_stop_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_down_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_set_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_install_key_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_create_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_delete_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_flush_tids_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_set_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_assoc_complete_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vht_rate_set,
+    WMITLV_TAG_STRUC_wmi_bcn_tmpl_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_prb_tmpl_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bcn_prb_info,
+    WMITLV_TAG_STRUC_wmi_peer_tid_addba_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_tid_delba_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sta_powersave_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sta_powersave_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sta_dtim_ps_method_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_scan_mode_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_scan_rssi_threshold_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_scan_period_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_scan_rssi_change_threshold_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_suspend_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_resume_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_add_bcn_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rmv_bcn_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wow_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wow_hostwakeup_from_sleep_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_param,
+    WMITLV_TAG_STRUC_WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_ARP_OFFLOAD_TUPLE,
+    WMITLV_TAG_STRUC_WMI_NS_OFFLOAD_TUPLE,
+    WMITLV_TAG_STRUC_wmi_ftm_intg_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_STA_KEEPALIVE_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_STA_KEEPALVE_ARP_RESPONSE,
+    WMITLV_TAG_STRUC_wmi_p2p_set_vendor_ie_data_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ap_ps_peer_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_rate_retry_sched_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wlan_profile_trigger_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wlan_profile_set_hist_intvl_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wlan_profile_get_prof_data_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wlan_profile_enable_profile_id_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_WOW_DEL_PATTERN_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_WOW_ADD_DEL_EVT_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rtt_measreq_head,
+    WMITLV_TAG_STRUC_wmi_rtt_measreq_body,
+    WMITLV_TAG_STRUC_wmi_rtt_tsf_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_spectral_configure_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_spectral_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nlo_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_nlo_configured_parameters,
+    WMITLV_TAG_STRUC_wmi_csa_offload_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_csa_offload_chanswitch_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chatter_set_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_echo_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_set_keepalive_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_FORCE_FW_HANG_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_gpio_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_gpio_output_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_add_wds_entry_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_remove_wds_entry_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bcn_tx_hdr,
+    WMITLV_TAG_STRUC_wmi_bcn_send_from_host_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mgmt_tx_hdr,
+    WMITLV_TAG_STRUC_wmi_addba_clear_resp_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_addba_send_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_delba_send_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_addba_setresponse_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_send_singleamsdu_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_pktlog_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_pktlog_disable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_ht_ie_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_vht_ie_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_dscp_tid_map_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_green_ap_ps_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_get_tpc_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_base_macaddr_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_mcast_group_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_ap_profile_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ap_profile,
+    WMITLV_TAG_STRUC_wmi_scan_sch_priority_table_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_dfs_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_dfs_disable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_WOW_ADD_PATTERN_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WOW_BITMAP_PATTERN_T,
+    WMITLV_TAG_STRUC_WOW_IPV4_SYNC_PATTERN_T,
+    WMITLV_TAG_STRUC_WOW_IPV6_SYNC_PATTERN_T,
+    WMITLV_TAG_STRUC_WOW_MAGIC_PATTERN_CMD,
+    WMITLV_TAG_STRUC_WMI_scan_update_request_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chatter_pkt_coalescing_filter,
+    WMITLV_TAG_STRUC_wmi_chatter_coalescing_add_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chatter_coalescing_delete_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chatter_coalescing_query_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_txbf_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_debug_log_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nlo_event,
+    WMITLV_TAG_STRUC_wmi_chatter_query_reply_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_upload_h_hdr,
+    WMITLV_TAG_STRUC_wmi_capture_h_event_hdr,
+    WMITLV_TAG_STRUC_WMI_VDEV_WNM_SLEEPMODE_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_wmm_addts_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_wmm_delts_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_set_wmm_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tdls_set_state_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tdls_peer_update_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tdls_peer_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tdls_peer_capabilities,
+    WMITLV_TAG_STRUC_wmi_vdev_mcc_set_tbtt_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_chan_list_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_mcc_bcn_intvl_change_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_resmgr_set_chan_time_quota_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_resmgr_set_chan_latency_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ba_req_ssn_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ba_rsp_ssn_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_p2p_set_oppps_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_p2p_set_noa_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ba_req_ssn_cmd_sub_struct_param,
+    WMITLV_TAG_STRUC_wmi_ba_req_ssn_event_sub_struct_param,
+    WMITLV_TAG_STRUC_wmi_sta_smps_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_set_gtx_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mcc_sched_traffic_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mcc_sched_sta_traffic_stats,
+    WMITLV_TAG_STRUC_wmi_offload_bcn_tx_status_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_p2p_noa_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_hb_set_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_hb_set_tcp_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_hb_set_tcp_pkt_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_hb_set_udp_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_hb_set_udp_pkt_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_hb_ind_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tx_pause_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rfkill_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dfs_radar_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_ena_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_dis_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_batch_scan_result_scan_list,
+    WMITLV_TAG_STRUC_wmi_batch_scan_result_network_info,
+    WMITLV_TAG_STRUC_wmi_batch_scan_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_batch_scan_disable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_batch_scan_trigger_result_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_batch_scan_enabled_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_batch_scan_result_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_plmreq_start_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_plmreq_stop_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_thermal_mgmt_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_thermal_mgmt_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_info_req_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_info_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_info,
+    WMITLV_TAG_STRUC_wmi_peer_tx_fail_cnt_thr_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rmc_set_action_period_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rmc_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mhf_offload_set_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mhf_offload_plumb_routing_table_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nan_cmd_param,
+    WMITLV_TAG_STRUC_wmi_nan_event_hdr,
+    WMITLV_TAG_STRUC_wmi_pdev_l1ss_track_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_diag_data_container_event_fixed_param,
+	WMITLV_TAG_STRUC_wmi_modem_power_state_cmd_param,
+    WMITLV_TAG_STRUC_wmi_peer_get_estimated_linkspeed_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_estimated_linkspeed_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_aggr_state_trig_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mhf_offload_routing_table_entry,
+    WMITLV_TAG_STRUC_wmi_roam_scan_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_req_stats_ext_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_stats_ext_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_obss_scan_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_obss_scan_disable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_offload_prb_rsp_tx_status_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_led_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_host_auto_shutdown_cfg_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_host_auto_shutdown_event_fixed_param,
+	WMITLV_TAG_STRUC_wmi_update_whal_mib_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chan_avoid_update_cmd_param,
+    WMITLV_TAG_STRUC_WOW_IOAC_PKT_PATTERN_T,
+    WMITLV_TAG_STRUC_WOW_IOAC_TMR_PATTERN_T,
+    WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_KEEPALIVE_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_KEEPALIVE_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_WOW_IOAC_KEEPALIVE_T,
+    WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_PATTERN_CMD_fixed_param,
+    WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_PATTERN_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_start_link_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_clear_link_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_request_link_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_iface_link_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_radio_link_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_channel_stats,
+    WMITLV_TAG_STRUC_wmi_radio_link_stats,
+    WMITLV_TAG_STRUC_wmi_rate_stats,
+    WMITLV_TAG_STRUC_wmi_peer_link_stats,
+    WMITLV_TAG_STRUC_wmi_wmm_ac_stats,
+    WMITLV_TAG_STRUC_wmi_iface_link_stats,
+    WMITLV_TAG_STRUC_wmi_lpi_mgmt_snooping_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_lpi_start_scan_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_lpi_stop_scan_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_lpi_result_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_state_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_bucket_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_bucket_channel_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_start_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_stop_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_wlan_change_bssid_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_monitor_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_get_cached_results_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_get_wlan_change_results_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_set_capabilities_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_get_capabilities_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_operation_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_start_stop_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_table_usage_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_wlan_descriptor_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_rssi_info_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_cached_results_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_wlan_change_results_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_wlan_change_result_bssid_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_capabilities_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_cache_capabilities_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_wlan_change_monitor_capabilities_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_hotlist_monitor_capabilities_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_d0_wow_enable_disable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_d0_wow_disable_ack_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_unit_test_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_offload_tlv_param,
+    WMITLV_TAG_STRUC_wmi_roam_11i_offload_tlv_param,
+    WMITLV_TAG_STRUC_wmi_roam_11r_offload_tlv_param,
+    WMITLV_TAG_STRUC_wmi_roam_ese_offload_tlv_param,
+    WMITLV_TAG_STRUC_wmi_roam_synch_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_synch_complete_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extwow_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extwow_set_app_type1_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extwow_set_app_type2_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_lpi_status_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_lpi_handoff_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_rate_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_rate_ht_info,
+    WMITLV_TAG_STRUC_wmi_ric_request_fixed_param,
+	WMITLV_TAG_STRUC_wmi_pdev_get_temperature_cmd_fixed_param,
+	WMITLV_TAG_STRUC_wmi_pdev_temperature_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_set_dhcp_server_offload_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tpc_chainmask_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ric_tspec,
+    WMITLV_TAG_STRUC_wmi_tpc_chainmask_config,
+    WMITLV_TAG_STRUCT_wmi_ipa_offload_enable_disable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_scan_prob_req_oui_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_key_material,
+    WMITLV_TAG_STRUC_wmi_tdls_set_offchan_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_set_led_flashing_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mdns_offload_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mdns_set_fqdn_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mdns_set_resp_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mdns_get_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mdns_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_invoke_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_resume_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_antenna_diversity_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sap_ofl_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sap_ofl_add_sta_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sap_ofl_del_sta_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_apfind_cmd_param,
+    WMITLV_TAG_STRUC_wmi_apfind_event_hdr,
+    WMITLV_TAG_STRUC_wmi_ocb_set_sched_cmd_fixed_param,     // DEPRECATED
+    WMITLV_TAG_STRUC_wmi_ocb_set_sched_event_fixed_param,   // DEPRECATED
+    WMITLV_TAG_STRUC_wmi_ocb_set_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ocb_set_config_resp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ocb_set_utc_time_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ocb_start_timing_advert_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ocb_stop_timing_advert_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_resp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dcc_get_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dcc_channel_stats_request,
+    WMITLV_TAG_STRUC_wmi_dcc_get_stats_resp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dcc_clear_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dcc_update_ndl_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dcc_update_ndl_resp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dcc_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ocb_channel,
+    WMITLV_TAG_STRUC_wmi_ocb_schedule_element,
+    WMITLV_TAG_STRUC_wmi_dcc_ndl_stats_per_channel,
+    WMITLV_TAG_STRUC_wmi_dcc_ndl_chan,
+    WMITLV_TAG_STRUC_wmi_qos_parameter,
+    WMITLV_TAG_STRUC_wmi_dcc_ndl_active_state_config,
+    WMITLV_TAG_STRUC_wmi_roam_scan_extended_threshold_param,
+    WMITLV_TAG_STRUC_wmi_roam_filter_fixed_param,
+    WMITLV_TAG_STRUC_wmi_passpoint_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_passpoint_event_hdr,
+    WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_ssid_monitor_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_hotlist_ssid_match_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_tsf_report_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_get_fw_mem_dump_fixed_param,
+    WMITLV_TAG_STRUC_wmi_update_fw_mem_dump_fixed_param,
+    WMITLV_TAG_STRUC_wmi_fw_mem_dump_params,
+    WMITLV_TAG_STRUC_wmi_debug_mesg_flush_fixed_param,
+    WMITLV_TAG_STRUC_wmi_debug_mesg_flush_complete_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_set_rate_report_condition_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_subnet_change_config_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_set_ie_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rssi_breach_monitor_config_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rssi_breach_event_fixed_param,
+    WMITLV_TAG_STRUC_WOW_EVENT_INITIAL_WAKEUP_fixed_param,
+    WMITLV_TAG_STRUC_wmi_soc_set_pcl_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_response_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_soc_hw_mode_transition_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_txrx_streams,
+    WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_response_vdev_mac_entry,
+    WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_response_event_fixed_param,
+    WMITLV_TAG_STRUC_WOW_IOAC_SOCK_PATTERN_T,
+    WMITLV_TAG_STRUC_wmi_wow_enable_icmpv6_na_flt_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_diag_event_log_config_fixed_param,
+    WMITLV_TAG_STRUC_wmi_diag_event_log_supported_event_fixed_params,
+    WMITLV_TAG_STRUC_wmi_packet_filter_config_fixed_param,
+    WMITLV_TAG_STRUC_wmi_packet_filter_enable_fixed_param,
+    WMITLV_TAG_STRUC_wmi_sap_set_blacklist_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mgmt_tx_send_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mgmt_tx_compl_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_soc_set_antenna_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_lro_info_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_earlystop_rssi_thres_param,
+    WMITLV_TAG_STRUC_wmi_service_ready_ext_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mawc_sensor_report_ind_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mawc_enable_sensor_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_configure_mawc_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nlo_configure_mawc_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_extscan_configure_mawc_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_assoc_conf_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wow_hostwakeup_gpio_pin_pattern_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ap_ps_egap_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ap_ps_egap_info_event_fixed_param,
+    WMITLV_TAG_STRUC_WMI_PMF_OFFLOAD_SET_SA_QUERY_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_complete_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_scpc_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ap_ps_egap_info_chainmask_list,
+    WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_complete_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bpf_get_capability_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bpf_capability_info_evt_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bpf_get_vdev_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bpf_vdev_stats_info_evt_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bpf_set_vdev_instructions_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bpf_del_vdev_instructions_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_delete_resp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_delete_resp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_dense_thres_param,
+    WMITLV_TAG_STRUC_enlo_candidate_score_param,
+    WMITLV_TAG_STRUC_wmi_peer_update_wds_entry_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_config_ratemask_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_fips_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_smart_ant_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_smart_ant_set_rx_antenna_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_tx_antenna_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_train_antenna_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_node_config_ops_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_ant_switch_tbl_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_ctl_table_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_mimogain_table_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_fwtest_set_param_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_atf_request_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_atf_request_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_get_ani_cck_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_get_ani_ofdm_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_inst_rssi_stats_resp_fixed_param,
+    WMITLV_TAG_STRUC_wmi_med_util_report_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_sta_ps_statechange_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wds_addr_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_ratecode_list_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_tpc_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ani_ofdm_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ani_cck_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_channel_hopping_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_fips_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_atf_peer_info,
+    WMITLV_TAG_STRUC_wmi_pdev_get_tpc_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_filter_nrp_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_QBOOST_CFG_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_smart_ant_gpio_handle,
+    WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_tx_antenna_series,
+    WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_train_antenna_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_ant_ctrl_chain,
+    WMITLV_TAG_STRUC_wmi_peer_cck_ofdm_rate_info,
+    WMITLV_TAG_STRUC_wmi_peer_mcs_rate_info,
+    WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBr,
+    WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBm,
+    WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_freqNum,
+    WMITLV_TAG_STRUC_wmi_mu_report_total_mu,
+    WMITLV_TAG_STRUC_wmi_vdev_set_dscp_tid_map_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_roam_set_mbo_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mib_stats_enable_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nan_disc_iface_created_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nan_disc_iface_deleted_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nan_started_cluster_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_nan_joined_cluster_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndi_get_cap_req_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_initiator_req_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_responder_req_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_end_req_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndi_cap_rsp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_initiator_rsp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_responder_rsp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_end_rsp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_indication_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_confirm_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_end_indication_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_set_quiet_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_pcl_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_antenna_mode_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_response_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_hw_mode_transition_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_response_vdev_mac_entry,
+    WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_response_event_fixed_param,
+    WMITLV_TAG_STRUC_WMI_COEX_CONFIG_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_config_enhanced_mcast_filter_fixed_param,
+    WMITLV_TAG_STRUC_WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param,
+    WMITLV_TAG_STRUC_wmi_set_periodic_channel_stats_config_fixed_param,
+    WMITLV_TAG_STRUC_wmi_vdev_set_custom_aggr_size_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_wal_power_debug_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_MAC_PHY_CAPABILITIES,
+    WMITLV_TAG_STRUC_WMI_HW_MODE_CAPABILITIES,
+    WMITLV_TAG_STRUC_WMI_SOC_MAC_PHY_HW_MODE_CAPS,
+    WMITLV_TAG_STRUC_WMI_HAL_REG_CAPABILITIES_EXT,
+    WMITLV_TAG_STRUC_WMI_SOC_HAL_REG_CAPABILITIES,
+    WMITLV_TAG_STRUC_wmi_vdev_wisa_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tx_power_level_stats_evt_fixed_param,
+    WMITLV_TAG_STRUC_wmi_scan_adaptive_dwell_parameters_tlv,
+    WMITLV_TAG_STRUC_wmi_scan_adaptive_dwell_config_fixed_param,
+    WMITLV_TAG_STRUC_wmi_wow_set_action_wake_up_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_ndp_end_rsp_per_ndi,
+    WMITLV_TAG_STRUC_wmi_peer_bwf_request_fixed_param,
+    WMITLV_TAG_STRUC_wmi_bwf_peer_info,
+    WMITLV_TAG_STRUC_wmi_dbglog_time_stamp_sync_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rmc_set_leader_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_rmc_manual_leader_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_per_chain_rssi_stats,
+    WMITLV_TAG_STRUC_wmi_rssi_stats,
+    WMITLV_TAG_STRUC_wmi_p2p_lo_start_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_p2p_lo_stop_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_p2p_lo_stopped_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_reorder_queue_setup_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_reorder_queue_remove_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_set_multiple_mcast_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mgmt_tx_compl_bundle_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_read_data_from_flash_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_read_data_from_flash_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_set_reorder_timeout_val_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_set_rx_blocksize_cmd_fixed_param,
+    WMITLV_TAG_STRUC_WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param,
+    WMITLV_TAG_STRUC_wmi_tlv_buf_len_param,
+    WMITLV_TAG_STRUC_wmi_service_available_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_antdiv_info_req_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_antdiv_info_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_antdiv_info,
+    WMITLV_TAG_STRUC_wmi_pdev_get_antdiv_status_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_antdiv_status_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_mnt_filter_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_get_chip_power_stats_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_chip_power_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_coex_get_antenna_isolation_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_coex_report_isolation_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chan_cca_stats,
+    WMITLV_TAG_STRUC_wmi_peer_signal_stats,
+    WMITLV_TAG_STRUC_wmi_tx_stats,
+    WMITLV_TAG_STRUC_wmi_peer_ac_tx_stats,
+    WMITLV_TAG_STRUC_wmi_rx_stats,
+    WMITLV_TAG_STRUC_wmi_peer_ac_rx_stats,
+    WMITLV_TAG_STRUC_wmi_report_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_chan_cca_stats_thresh,
+    WMITLV_TAG_STRUC_wmi_peer_signal_stats_thresh,
+    WMITLV_TAG_STRUC_wmi_tx_stats_thresh,
+    WMITLV_TAG_STRUC_wmi_rx_stats_thresh,
+    WMITLV_TAG_STRUC_wmi_pdev_set_stats_threshold_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_request_wlan_stats_cmd_fixed_param,
+} WMITLV_TAG_ID;
+
+/*
+ * IMPORTANT: Please add _ALL_ WMI Commands Here.
+ * Otherwise, these WMI TLV Functions will be process them.
+ */
+#define WMITLV_ALL_CMD_LIST(OP) \
+    OP(WMI_INIT_CMDID) \
+    OP(WMI_PEER_CREATE_CMDID) \
+    OP(WMI_PEER_DELETE_CMDID) \
+    OP(WMI_PEER_FLUSH_TIDS_CMDID) \
+    OP(WMI_PEER_SET_PARAM_CMDID) \
+    OP(WMI_STA_POWERSAVE_MODE_CMDID) \
+    OP(WMI_STA_POWERSAVE_PARAM_CMDID) \
+    OP(WMI_STA_DTIM_PS_METHOD_CMDID) \
+    OP(WMI_PDEV_SET_REGDOMAIN_CMDID) \
+    OP(WMI_PEER_TID_ADDBA_CMDID) \
+    OP(WMI_PEER_TID_DELBA_CMDID) \
+    OP(WMI_PDEV_FTM_INTG_CMDID) \
+    OP(WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID) \
+    OP(WMI_WOW_ENABLE_CMDID) \
+    OP(WMI_RMV_BCN_FILTER_CMDID) \
+    OP(WMI_ROAM_SCAN_MODE) \
+    OP(WMI_ROAM_SCAN_RSSI_THRESHOLD) \
+    OP(WMI_ROAM_SCAN_PERIOD) \
+    OP(WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD) \
+    OP(WMI_START_SCAN_CMDID) \
+    OP(WMI_VDEV_PLMREQ_START_CMDID) \
+    OP(WMI_VDEV_PLMREQ_STOP_CMDID) \
+    OP(WMI_PDEV_SET_CHANNEL_CMDID) \
+    OP(WMI_PDEV_SET_WMM_PARAMS_CMDID) \
+    OP(WMI_VDEV_START_REQUEST_CMDID) \
+    OP(WMI_VDEV_RESTART_REQUEST_CMDID) \
+    OP(WMI_P2P_GO_SET_BEACON_IE) \
+    OP(WMI_GTK_OFFLOAD_CMDID) \
+    OP(WMI_SCAN_CHAN_LIST_CMDID) \
+    OP(WMI_STA_UAPSD_AUTO_TRIG_CMDID) \
+    OP(WMI_PRB_TMPL_CMDID) \
+    OP(WMI_BCN_TMPL_CMDID) \
+    OP(WMI_VDEV_INSTALL_KEY_CMDID) \
+    OP(WMI_PEER_ASSOC_CMDID) \
+    OP(WMI_ADD_BCN_FILTER_CMDID) \
+    OP(WMI_STA_KEEPALIVE_CMDID) \
+    OP(WMI_SET_ARP_NS_OFFLOAD_CMDID) \
+    OP(WMI_P2P_SET_VENDOR_IE_DATA_CMDID) \
+    OP(WMI_AP_PS_PEER_PARAM_CMDID) \
+    OP(WMI_WLAN_PROFILE_TRIGGER_CMDID) \
+    OP(WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID) \
+    OP(WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID) \
+    OP(WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID) \
+    OP(WMI_WOW_DEL_WAKE_PATTERN_CMDID) \
+    OP(WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID) \
+    OP(WMI_RTT_MEASREQ_CMDID) \
+    OP(WMI_RTT_TSF_CMDID) \
+    OP(WMI_OEM_REQ_CMDID) \
+    OP(WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID) \
+    OP(WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID) \
+    OP(WMI_REQUEST_STATS_CMDID) \
+    OP(WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID) \
+    OP(WMI_CSA_OFFLOAD_ENABLE_CMDID) \
+    OP(WMI_CSA_OFFLOAD_CHANSWITCH_CMDID) \
+    OP(WMI_CHATTER_SET_MODE_CMDID) \
+    OP(WMI_ECHO_CMDID) \
+    OP(WMI_PDEV_UTF_CMDID) \
+    OP(WMI_PDEV_QVIT_CMDID) \
+    OP(WMI_VDEV_SET_KEEPALIVE_CMDID) \
+    OP(WMI_VDEV_GET_KEEPALIVE_CMDID) \
+    OP(WMI_FORCE_FW_HANG_CMDID) \
+    OP(WMI_GPIO_CONFIG_CMDID) \
+    OP(WMI_GPIO_OUTPUT_CMDID) \
+    OP(WMI_PEER_ADD_WDS_ENTRY_CMDID) \
+    OP(WMI_PEER_REMOVE_WDS_ENTRY_CMDID) \
+    OP(WMI_BCN_TX_CMDID) \
+    OP(WMI_PDEV_SEND_BCN_CMDID) \
+    OP(WMI_MGMT_TX_CMDID) \
+    OP(WMI_ADDBA_CLEAR_RESP_CMDID) \
+    OP(WMI_ADDBA_SEND_CMDID) \
+    OP(WMI_DELBA_SEND_CMDID) \
+    OP(WMI_ADDBA_SET_RESP_CMDID) \
+    OP(WMI_SEND_SINGLEAMSDU_CMDID) \
+    OP(WMI_PDEV_PKTLOG_ENABLE_CMDID) \
+    OP(WMI_PDEV_PKTLOG_DISABLE_CMDID) \
+    OP(WMI_PDEV_SET_HT_CAP_IE_CMDID) \
+    OP(WMI_PDEV_SET_VHT_CAP_IE_CMDID) \
+    OP(WMI_PDEV_SET_DSCP_TID_MAP_CMDID) \
+    OP(WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID) \
+    OP(WMI_PDEV_GET_TPC_CONFIG_CMDID) \
+    OP(WMI_PDEV_SET_BASE_MACADDR_CMDID) \
+    OP(WMI_PEER_MCAST_GROUP_CMDID) \
+    OP(WMI_ROAM_AP_PROFILE) \
+    OP(WMI_SCAN_SCH_PRIO_TBL_CMDID) \
+    OP(WMI_PDEV_DFS_ENABLE_CMDID) \
+    OP(WMI_PDEV_DFS_DISABLE_CMDID) \
+    OP(WMI_WOW_ADD_WAKE_PATTERN_CMDID) \
+    OP(WMI_PDEV_SUSPEND_CMDID) \
+    OP(WMI_PDEV_RESUME_CMDID) \
+    OP(WMI_STOP_SCAN_CMDID) \
+    OP(WMI_PDEV_SET_PARAM_CMDID) \
+    OP(WMI_PDEV_SET_QUIET_MODE_CMDID) \
+    OP(WMI_VDEV_CREATE_CMDID) \
+    OP(WMI_VDEV_DELETE_CMDID) \
+    OP(WMI_VDEV_UP_CMDID) \
+    OP(WMI_VDEV_STOP_CMDID) \
+    OP(WMI_VDEV_DOWN_CMDID) \
+    OP(WMI_VDEV_SET_PARAM_CMDID) \
+    OP(WMI_SCAN_UPDATE_REQUEST_CMDID) \
+    OP(WMI_CHATTER_ADD_COALESCING_FILTER_CMDID) \
+    OP(WMI_CHATTER_DELETE_COALESCING_FILTER_CMDID) \
+    OP(WMI_CHATTER_COALESCING_QUERY_CMDID) \
+    OP(WMI_TXBF_CMDID) \
+    OP(WMI_DBGLOG_CFG_CMDID) \
+    OP(WMI_VDEV_WNM_SLEEPMODE_CMDID) \
+    OP(WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMDID) \
+    OP(WMI_VDEV_WMM_ADDTS_CMDID) \
+    OP(WMI_VDEV_WMM_DELTS_CMDID) \
+    OP(WMI_VDEV_SET_WMM_PARAMS_CMDID) \
+    OP(WMI_VDEV_SET_GTX_PARAMS_CMDID) \
+    OP(WMI_TDLS_SET_STATE_CMDID) \
+    OP(WMI_TDLS_PEER_UPDATE_CMDID) \
+    OP(WMI_FWTEST_VDEV_MCC_SET_TBTT_MODE_CMDID) \
+    OP(WMI_ROAM_CHAN_LIST)  \
+    OP(WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID)\
+    OP(WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID)    \
+    OP(WMI_RESMGR_SET_CHAN_LATENCY_CMDID) \
+    OP(WMI_BA_REQ_SSN_CMDID) \
+    OP(WMI_STA_SMPS_FORCE_MODE_CMDID) \
+    OP(WMI_SET_MCASTBCAST_FILTER_CMDID) \
+    OP(WMI_P2P_SET_OPPPS_PARAM_CMDID) \
+    OP(WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID) \
+    OP(WMI_STA_SMPS_PARAM_CMDID) \
+    OP(WMI_MCC_SCHED_TRAFFIC_STATS_CMDID) \
+    OP(WMI_HB_SET_ENABLE_CMDID) \
+    OP(WMI_HB_SET_TCP_PARAMS_CMDID) \
+    OP(WMI_HB_SET_TCP_PKT_FILTER_CMDID) \
+    OP(WMI_HB_SET_UDP_PARAMS_CMDID) \
+    OP(WMI_HB_SET_UDP_PKT_FILTER_CMDID) \
+    OP(WMI_PEER_INFO_REQ_CMDID) \
+    OP(WMI_RMC_SET_MODE_CMDID) \
+    OP(WMI_RMC_SET_ACTION_PERIOD_CMDID) \
+    OP(WMI_RMC_CONFIG_CMDID) \
+    OP(WMI_MHF_OFFLOAD_SET_MODE_CMDID) \
+    OP(WMI_MHF_OFFLOAD_PLUMB_ROUTING_TBL_CMDID) \
+    OP(WMI_DFS_PHYERR_FILTER_ENA_CMDID) \
+    OP(WMI_DFS_PHYERR_FILTER_DIS_CMDID) \
+    OP(WMI_BATCH_SCAN_ENABLE_CMDID) \
+    OP(WMI_BATCH_SCAN_DISABLE_CMDID) \
+    OP(WMI_BATCH_SCAN_TRIGGER_RESULT_CMDID)\
+    OP(WMI_THERMAL_MGMT_CMDID)\
+    OP(WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID)\
+    OP(WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID) \
+    OP(WMI_NAN_CMDID) \
+    OP(WMI_MODEM_POWER_STATE_CMDID) \
+    OP(WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID) \
+    OP(WMI_ROAM_SCAN_CMD) \
+    OP(WMI_REQUEST_STATS_EXT_CMDID) \
+    OP(WMI_OBSS_SCAN_ENABLE_CMDID) \
+    OP(WMI_OBSS_SCAN_DISABLE_CMDID) \
+    OP(WMI_PDEV_SET_LED_CONFIG_CMDID) \
+    OP(WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID) \
+    OP(WMI_TPC_CHAINMASK_CONFIG_CMDID) \
+    OP(WMI_CHAN_AVOID_UPDATE_CMDID) \
+    OP(WMI_WOW_IOAC_ADD_KEEPALIVE_CMDID) \
+    OP(WMI_WOW_IOAC_DEL_KEEPALIVE_CMDID) \
+    OP(WMI_WOW_IOAC_ADD_WAKE_PATTERN_CMDID) \
+    OP(WMI_WOW_IOAC_DEL_WAKE_PATTERN_CMDID) \
+    OP(WMI_REQUEST_LINK_STATS_CMDID) \
+    OP(WMI_START_LINK_STATS_CMDID) \
+    OP(WMI_CLEAR_LINK_STATS_CMDID) \
+    OP(WMI_LPI_MGMT_SNOOPING_CONFIG_CMDID) \
+    OP(WMI_LPI_START_SCAN_CMDID) \
+    OP(WMI_LPI_STOP_SCAN_CMDID) \
+    OP(WMI_EXTSCAN_START_CMDID) \
+    OP(WMI_EXTSCAN_STOP_CMDID) \
+    OP(WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID) \
+    OP(WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID) \
+    OP(WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID) \
+    OP(WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID) \
+    OP(WMI_EXTSCAN_SET_CAPABILITIES_CMDID) \
+    OP(WMI_EXTSCAN_GET_CAPABILITIES_CMDID) \
+    OP(WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID) \
+    OP(WMI_D0_WOW_ENABLE_DISABLE_CMDID) \
+    OP(WMI_UNIT_TEST_CMDID) \
+    OP(WMI_ROAM_SYNCH_COMPLETE) \
+    OP(WMI_EXTWOW_ENABLE_CMDID) \
+    OP(WMI_EXTWOW_SET_APP_TYPE1_PARAMS_CMDID) \
+    OP(WMI_EXTWOW_SET_APP_TYPE2_PARAMS_CMDID) \
+    OP(WMI_ROAM_SET_RIC_REQUEST_CMDID) \
+    OP(WMI_PDEV_GET_TEMPERATURE_CMDID) \
+    OP(WMI_SET_DHCP_SERVER_OFFLOAD_CMDID) \
+    OP(WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMDID)\
+    OP(WMI_SCAN_PROB_REQ_OUI_CMDID) \
+    OP(WMI_TDLS_SET_OFFCHAN_MODE_CMDID)\
+    OP(WMI_PDEV_SET_LED_FLASHING_CMDID) \
+    OP(WMI_ROAM_INVOKE_CMDID) \
+    OP(WMI_MDNS_OFFLOAD_ENABLE_CMDID) \
+    OP(WMI_MDNS_SET_FQDN_CMDID) \
+    OP(WMI_MDNS_SET_RESPONSE_CMDID) \
+    OP(WMI_MDNS_GET_STATS_CMDID) \
+    OP(WMI_SET_ANTENNA_DIVERSITY_CMDID) \
+    OP(WMI_SAP_OFL_ENABLE_CMDID) \
+    OP(WMI_APFIND_CMDID) \
+    OP(WMI_OCB_SET_SCHED_CMDID) \
+    OP(WMI_OCB_SET_CONFIG_CMDID) \
+    OP(WMI_OCB_SET_UTC_TIME_CMDID) \
+    OP(WMI_OCB_START_TIMING_ADVERT_CMDID) \
+    OP(WMI_OCB_STOP_TIMING_ADVERT_CMDID) \
+    OP(WMI_OCB_GET_TSF_TIMER_CMDID) \
+    OP(WMI_DCC_GET_STATS_CMDID) \
+    OP(WMI_DCC_CLEAR_STATS_CMDID) \
+    OP(WMI_DCC_UPDATE_NDL_CMDID) \
+    OP(WMI_ROAM_FILTER_CMDID) \
+    OP(WMI_PASSPOINT_LIST_CONFIG_CMDID) \
+    OP(WMI_VDEV_TSF_TSTAMP_ACTION_CMDID) \
+    OP(WMI_GET_FW_MEM_DUMP_CMDID) \
+    OP(WMI_DEBUG_MESG_FLUSH_CMDID) \
+    OP(WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID) \
+    OP(WMI_ROAM_SUBNET_CHANGE_CONFIG_CMDID) \
+    OP(WMI_VDEV_SET_IE_CMDID) \
+    OP(WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID) \
+    OP(WMI_SOC_SET_PCL_CMDID) \
+    OP(WMI_SOC_SET_HW_MODE_CMDID) \
+    OP(WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID) \
+    OP(WMI_WOW_ENABLE_ICMPV6_NA_FLT_CMDID) \
+    OP(WMI_DIAG_EVENT_LOG_CONFIG_CMDID) \
+    OP(WMI_PACKET_FILTER_CONFIG_CMDID) \
+    OP(WMI_PACKET_FILTER_ENABLE_CMDID) \
+    OP(WMI_SAP_SET_BLACKLIST_PARAM_CMDID) \
+    OP(WMI_MGMT_TX_SEND_CMDID) \
+    OP(WMI_SOC_SET_ANTENNA_MODE_CMDID) \
+    OP(WMI_WOW_UDP_SVC_OFLD_CMDID) \
+    OP(WMI_LRO_CONFIG_CMDID) \
+    OP(WMI_MAWC_SENSOR_REPORT_IND_CMDID) \
+    OP(WMI_ROAM_CONFIGURE_MAWC_CMDID) \
+    OP(WMI_NLO_CONFIGURE_MAWC_CMDID) \
+    OP(WMI_EXTSCAN_CONFIGURE_MAWC_CMDID) \
+    OP(WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMDID) \
+    OP(WMI_AP_PS_EGAP_PARAM_CMDID) \
+    OP(WMI_PMF_OFFLOAD_SET_SA_QUERY_CMDID) \
+    OP(WMI_TRANSFER_DATA_TO_FLASH_CMDID) \
+    OP(WMI_OEM_REQUEST_CMDID) \
+    OP(WMI_BPF_GET_CAPABILITY_CMDID) \
+    OP(WMI_BPF_GET_VDEV_STATS_CMDID) \
+    OP(WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID) \
+    OP(WMI_BPF_DEL_VDEV_INSTRUCTIONS_CMDID) \
+    OP(WMI_PEER_UPDATE_WDS_ENTRY_CMDID) \
+    OP(WMI_PEER_ADD_PROXY_STA_ENTRY_CMDID) \
+    OP(WMI_PDEV_FIPS_CMDID) \
+    OP(WMI_PDEV_SMART_ANT_ENABLE_CMDID) \
+    OP(WMI_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID) \
+    OP(WMI_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID) \
+    OP(WMI_PDEV_SET_CTL_TABLE_CMDID) \
+    OP(WMI_PDEV_SET_MIMOGAIN_TABLE_CMDID) \
+    OP(WMI_PDEV_GET_TPC_CMDID) \
+    OP(WMI_PDEV_GET_ANI_CCK_CONFIG_CMDID) \
+    OP(WMI_PDEV_GET_ANI_OFDM_CONFIG_CMDID) \
+    OP(WMI_VDEV_RATEMASK_CMDID) \
+    OP(WMI_VDEV_ATF_REQUEST_CMDID) \
+    OP(WMI_VDEV_SET_DSCP_TID_MAP_CMDID) \
+    OP(WMI_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID) \
+    OP(WMI_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID) \
+    OP(WMI_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID) \
+    OP(WMI_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID) \
+    OP(WMI_PEER_ATF_REQUEST_CMDID) \
+    OP(WMI_FWTEST_CMDID) \
+    OP(WMI_QBOOST_CFG_CMDID) \
+    OP(WMI_ROAM_SET_MBO_PARAM_CMDID) \
+    OP(WMI_MIB_STATS_ENABLE_CMDID) \
+    OP(WMI_NDI_GET_CAP_REQ_CMDID) \
+    OP(WMI_NDP_INITIATOR_REQ_CMDID) \
+    OP(WMI_NDP_RESPONDER_REQ_CMDID) \
+    OP(WMI_NDP_END_REQ_CMDID) \
+    OP(WMI_PDEV_SET_PCL_CMDID) \
+    OP(WMI_PDEV_SET_HW_MODE_CMDID) \
+    OP(WMI_PDEV_SET_MAC_CONFIG_CMDID) \
+    OP(WMI_PDEV_SET_ANTENNA_MODE_CMDID) \
+    OP(WMI_VDEV_SET_QUIET_MODE_CMDID) \
+    OP(WMI_COEX_CONFIG_CMDID) \
+    OP(WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID) \
+    OP(WMI_CHAN_AVOID_RPT_ALLOW_CMDID) \
+    OP(WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID) \
+    OP(WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID) \
+    OP(WMI_PDEV_WAL_POWER_DEBUG_CMDID) \
+    OP(WMI_VDEV_WISA_CMDID) \
+    OP(WMI_SCAN_ADAPTIVE_DWELL_CONFIG_CMDID) \
+    OP(WMI_WOW_SET_ACTION_WAKE_UP_CMDID) \
+    OP(WMI_PEER_BWF_REQUEST_CMDID) \
+    OP(WMI_DBGLOG_TIME_STAMP_SYNC_CMDID) \
+    OP(WMI_RMC_SET_MANUAL_LEADER_CMDID) \
+    OP(WMI_P2P_LISTEN_OFFLOAD_START_CMDID) \
+    OP(WMI_P2P_LISTEN_OFFLOAD_STOP_CMDID) \
+    OP(WMI_PEER_REORDER_QUEUE_SETUP_CMDID) \
+    OP(WMI_PEER_REORDER_QUEUE_REMOVE_CMDID) \
+    OP(WMI_SET_MULTIPLE_MCAST_FILTER_CMDID) \
+    OP(WMI_READ_DATA_FROM_FLASH_CMDID) \
+    OP(WMI_PDEV_SET_REORDER_TIMEOUT_VAL_CMDID) \
+    OP(WMI_PEER_SET_RX_BLOCKSIZE_CMDID) \
+    OP(WMI_PDEV_SET_WAKEUP_CONFIG_CMDID) \
+    OP(WMI_PEER_ANTDIV_INFO_REQ_CMDID) \
+    OP(WMI_PDEV_GET_ANTDIV_STATUS_CMDID) \
+    OP(WMI_MNT_FILTER_CMDID) \
+    OP(WMI_PDEV_GET_CHIP_POWER_STATS_CMDID) \
+    OP(WMI_COEX_GET_ANTENNA_ISOLATION_CMDID) \
+    OP(WMI_PDEV_SET_STATS_THRESHOLD_CMDID) \
+    OP(WMI_REQUEST_WLAN_STATS_CMDID) \
+    /* add new CMD_LIST elements above this line */
+
+
+/*
+ * IMPORTANT: Please add _ALL_ WMI Events Here.
+ * Otherwise, these WMI TLV Functions will be process them.
+ */
+#define WMITLV_ALL_EVT_LIST(OP) \
+    OP(WMI_SERVICE_READY_EVENTID) \
+    OP(WMI_SERVICE_READY_EXT_EVENTID) \
+    OP(WMI_READY_EVENTID) \
+    OP(WMI_SCAN_EVENTID) \
+    OP(WMI_PDEV_TPC_CONFIG_EVENTID) \
+    OP(WMI_CHAN_INFO_EVENTID) \
+    OP(WMI_PHYERR_EVENTID) \
+    OP(WMI_VDEV_START_RESP_EVENTID) \
+    OP(WMI_VDEV_STOPPED_EVENTID) \
+    OP(WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID) \
+    OP(WMI_PEER_STA_KICKOUT_EVENTID) \
+    OP(WMI_MGMT_RX_EVENTID) \
+    OP(WMI_TBTTOFFSET_UPDATE_EVENTID) \
+    OP(WMI_TX_DELBA_COMPLETE_EVENTID) \
+    OP(WMI_TX_ADDBA_COMPLETE_EVENTID) \
+    OP(WMI_ROAM_EVENTID) \
+    OP(WMI_WOW_WAKEUP_HOST_EVENTID) \
+    OP(WMI_RTT_ERROR_REPORT_EVENTID) \
+    OP(WMI_OEM_MEASUREMENT_REPORT_EVENTID) \
+    OP(WMI_OEM_ERROR_REPORT_EVENTID) \
+    OP(WMI_OEM_CAPABILITY_EVENTID) \
+    OP(WMI_ECHO_EVENTID) \
+    OP(WMI_PDEV_FTM_INTG_EVENTID) \
+    OP(WMI_VDEV_GET_KEEPALIVE_EVENTID) \
+    OP(WMI_GPIO_INPUT_EVENTID) \
+    OP(WMI_CSA_HANDLING_EVENTID) \
+    OP(WMI_DEBUG_MESG_EVENTID) \
+    OP(WMI_GTK_OFFLOAD_STATUS_EVENTID) \
+    OP(WMI_DCS_INTERFERENCE_EVENTID) \
+    OP(WMI_WLAN_PROFILE_DATA_EVENTID) \
+    OP(WMI_PDEV_UTF_EVENTID) \
+    OP(WMI_DEBUG_PRINT_EVENTID) \
+    OP(WMI_RTT_MEASUREMENT_REPORT_EVENTID) \
+    OP(WMI_HOST_SWBA_EVENTID) \
+    OP(WMI_UPDATE_STATS_EVENTID) \
+    OP(WMI_PDEV_QVIT_EVENTID) \
+    OP(WMI_WLAN_FREQ_AVOID_EVENTID) \
+    OP(WMI_GTK_REKEY_FAIL_EVENTID) \
+    OP(WMI_NLO_MATCH_EVENTID) \
+    OP(WMI_NLO_SCAN_COMPLETE_EVENTID) \
+    OP(WMI_APFIND_EVENTID) \
+    OP(WMI_CHATTER_PC_QUERY_EVENTID) \
+    OP(WMI_UPLOADH_EVENTID) \
+    OP(WMI_CAPTUREH_EVENTID) \
+    OP(WMI_TDLS_PEER_EVENTID) \
+    OP(WMI_VDEV_MCC_BCN_INTERVAL_CHANGE_REQ_EVENTID) \
+    OP(WMI_BA_RSP_SSN_EVENTID) \
+    OP(WMI_OFFLOAD_BCN_TX_STATUS_EVENTID) \
+    OP(WMI_P2P_NOA_EVENTID) \
+    OP(WMI_TX_PAUSE_EVENTID) \
+    OP(WMI_RFKILL_STATE_CHANGE_EVENTID) \
+    OP(WMI_PEER_INFO_EVENTID) \
+    OP(WMI_PEER_TX_FAIL_CNT_THR_EVENTID) \
+    OP(WMI_DFS_RADAR_EVENTID) \
+    OP(WMI_BATCH_SCAN_ENABLED_EVENTID) \
+    OP(WMI_BATCH_SCAN_RESULT_EVENTID) \
+    OP(WMI_THERMAL_MGMT_EVENTID) \
+    OP(WMI_NAN_EVENTID) \
+    OP(WMI_PDEV_L1SS_TRACK_EVENTID) \
+    OP(WMI_DIAG_DATA_CONTAINER_EVENTID) \
+    OP(WMI_PEER_ESTIMATED_LINKSPEED_EVENTID) \
+    OP(WMI_AGGR_STATE_TRIG_EVENTID) \
+    OP(WMI_STATS_EXT_EVENTID) \
+    OP(WMI_OFFLOAD_PROB_RESP_TX_STATUS_EVENTID) \
+    OP(WMI_HOST_AUTO_SHUTDOWN_EVENTID) \
+    OP(WMI_UPDATE_WHAL_MIB_STATS_EVENTID) \
+    OP(WMI_IFACE_LINK_STATS_EVENTID) \
+    OP(WMI_PEER_LINK_STATS_EVENTID) \
+    OP(WMI_RADIO_LINK_STATS_EVENTID) \
+    OP(WMI_LPI_RESULT_EVENTID) \
+    OP(WMI_PEER_STATE_EVENTID) \
+    OP(WMI_EXTSCAN_START_STOP_EVENTID) \
+    OP(WMI_EXTSCAN_OPERATION_EVENTID) \
+    OP(WMI_EXTSCAN_TABLE_USAGE_EVENTID) \
+    OP(WMI_EXTSCAN_CACHED_RESULTS_EVENTID) \
+    OP(WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID) \
+    OP(WMI_EXTSCAN_HOTLIST_MATCH_EVENTID) \
+    OP(WMI_EXTSCAN_CAPABILITIES_EVENTID) \
+    OP(WMI_EXTSCAN_HOTLIST_SSID_MATCH_EVENTID) \
+    OP(WMI_D0_WOW_DISABLE_ACK_EVENTID) \
+    OP(WMI_ROAM_SYNCH_EVENTID) \
+    OP(WMI_LPI_STATUS_EVENTID) \
+    OP(WMI_LPI_HANDOFF_EVENTID) \
+    OP(WMI_UPDATE_VDEV_RATE_STATS_EVENTID) \
+    OP(WMI_PDEV_TEMPERATURE_EVENTID) \
+    OP(WMI_DIAG_EVENTID) \
+    OP(WMI_MDNS_STATS_EVENTID) \
+    OP(WMI_PDEV_RESUME_EVENTID) \
+    OP(WMI_SAP_OFL_ADD_STA_EVENTID) \
+    OP(WMI_SAP_OFL_DEL_STA_EVENTID) \
+    OP(WMI_OCB_SET_SCHED_EVENTID) \
+    OP(WMI_OCB_SET_CONFIG_RESP_EVENTID) \
+    OP(WMI_OCB_GET_TSF_TIMER_RESP_EVENTID) \
+    OP(WMI_DCC_GET_STATS_RESP_EVENTID) \
+    OP(WMI_DCC_UPDATE_NDL_RESP_EVENTID) \
+    OP(WMI_DCC_STATS_EVENTID) \
+    OP(WMI_PASSPOINT_MATCH_EVENTID) \
+    OP(WMI_VDEV_TSF_REPORT_EVENTID) \
+    OP(WMI_UPDATE_FW_MEM_DUMP_EVENTID) \
+    OP(WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID) \
+    OP(WMI_RSSI_BREACH_EVENTID) \
+    OP(WMI_WOW_INITIAL_WAKEUP_EVENTID) \
+    OP(WMI_SOC_SET_HW_MODE_RESP_EVENTID) \
+    OP(WMI_SOC_HW_MODE_TRANSITION_EVENTID) \
+    OP(WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID) \
+    OP(WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID) \
+    OP(WMI_MGMT_TX_COMPLETION_EVENTID) \
+    OP(WMI_MAWC_ENABLE_SENSOR_EVENTID) \
+    OP(WMI_PEER_ASSOC_CONF_EVENTID) \
+    OP(WMI_AP_PS_EGAP_INFO_EVENTID) \
+    OP(WMI_TRANSFER_DATA_TO_FLASH_COMPLETE_EVENTID) \
+    OP(WMI_OEM_RESPONSE_EVENTID) \
+    OP(WMI_PDEV_UTF_SCPC_EVENTID) \
+    OP(WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID) \
+    OP(WMI_BPF_CAPABILIY_INFO_EVENTID) \
+    OP(WMI_BPF_VDEV_STATS_INFO_EVENTID) \
+    OP(WMI_VDEV_DELETE_RESP_EVENTID) \
+    OP(WMI_PEER_DELETE_RESP_EVENTID) \
+    OP(WMI_PDEV_FIPS_EVENTID) \
+    OP(WMI_PDEV_CHANNEL_HOPPING_EVENTID) \
+    OP(WMI_PDEV_ANI_CCK_LEVEL_EVENTID) \
+    OP(WMI_PDEV_ANI_OFDM_LEVEL_EVENTID) \
+    OP(WMI_PDEV_TPC_EVENTID) \
+    OP(WMI_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID) \
+    OP(WMI_PEER_RATECODE_LIST_EVENTID) \
+    OP(WMI_WDS_PEER_EVENTID) \
+    OP(WMI_PEER_STA_PS_STATECHG_EVENTID) \
+    OP(WMI_INST_RSSI_STATS_EVENTID) \
+    OP(WMI_NAN_DISC_IFACE_CREATED_EVENTID) \
+    OP(WMI_NAN_DISC_IFACE_DELETED_EVENTID) \
+    OP(WMI_NAN_STARTED_CLUSTER_EVENTID) \
+    OP(WMI_NAN_JOINED_CLUSTER_EVENTID) \
+    OP(WMI_NDI_CAP_RSP_EVENTID) \
+    OP(WMI_NDP_INITIATOR_RSP_EVENTID) \
+    OP(WMI_NDP_RESPONDER_RSP_EVENTID) \
+    OP(WMI_NDP_END_RSP_EVENTID) \
+    OP(WMI_NDP_INDICATION_EVENTID) \
+    OP(WMI_NDP_CONFIRM_EVENTID) \
+    OP(WMI_NDP_END_INDICATION_EVENTID) \
+    OP(WMI_PDEV_SET_HW_MODE_RESP_EVENTID) \
+    OP(WMI_PDEV_HW_MODE_TRANSITION_EVENTID) \
+    OP(WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID) \
+    OP(WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID) \
+    OP(WMI_RMC_NEW_LEADER_EVENTID) \
+    OP(WMI_P2P_LISTEN_OFFLOAD_STOPPED_EVENTID) \
+    OP(WMI_MGMT_TX_BUNDLE_COMPLETION_EVENTID) \
+    OP(WMI_READ_DATA_FROM_FLASH_EVENTID) \
+    OP(WMI_SERVICE_AVAILABLE_EVENTID) \
+    OP(WMI_PEER_ANTDIV_INFO_EVENTID) \
+    OP(WMI_PDEV_ANTDIV_STATUS_EVENTID) \
+    OP(WMI_PDEV_CHIP_POWER_STATS_EVENTID) \
+    OP(WMI_COEX_REPORT_ANTENNA_ISOLATION_EVENTID) \
+    OP(WMI_REPORT_STATS_EVENTID) \
+    /* add new EVT_LIST elements above this line */
+
+
+/* TLV definitions of WMI commands */
+
+/* Init Cmd */
+#define WMITLV_TABLE_WMI_INIT_CMDID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_init_cmd_fixed_param, wmi_init_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_resource_config, wmi_resource_config, resource_config, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wlan_host_memory_chunk, host_mem_chunks, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_cmd_fixed_param, wmi_pdev_set_hw_mode_cmd_fixed_param, hw_mode, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_INIT_CMDID);
+
+/* Peer create Cmd */
+#define WMITLV_TABLE_WMI_PEER_CREATE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_create_cmd_fixed_param, wmi_peer_create_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_CREATE_CMDID);
+
+/* Peer delete Cmd */
+#define WMITLV_TABLE_WMI_PEER_DELETE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_delete_cmd_fixed_param, wmi_peer_delete_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_DELETE_CMDID);
+
+/* Peer flush Cmd*/
+#define WMITLV_TABLE_WMI_PEER_FLUSH_TIDS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_flush_tids_cmd_fixed_param, wmi_peer_flush_tids_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_FLUSH_TIDS_CMDID);
+
+/* Peer Set Param Cmd */
+#define WMITLV_TABLE_WMI_PEER_SET_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_set_param_cmd_fixed_param, wmi_peer_set_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_SET_PARAM_CMDID);
+
+/* STA Powersave Mode Cmd */
+#define WMITLV_TABLE_WMI_STA_POWERSAVE_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sta_powersave_mode_cmd_fixed_param, wmi_sta_powersave_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_POWERSAVE_MODE_CMDID);
+
+/* STA Powersave Param Cmd */
+#define WMITLV_TABLE_WMI_STA_POWERSAVE_PARAM_CMDID(id,op,buf,len) \
+            WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sta_powersave_param_cmd_fixed_param, wmi_sta_powersave_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_POWERSAVE_PARAM_CMDID);
+
+/* STA DTIM PS METHOD Cmd */
+#define WMITLV_TABLE_WMI_STA_DTIM_PS_METHOD_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sta_dtim_ps_method_cmd_fixed_param, wmi_sta_dtim_ps_method_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_DTIM_PS_METHOD_CMDID);
+
+/* Pdev Set Reg Domain Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_REGDOMAIN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_regdomain_cmd_fixed_param, wmi_pdev_set_regdomain_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_REGDOMAIN_CMDID);
+
+
+/* Peer TID ADD BA Cmd */
+#define WMITLV_TABLE_WMI_PEER_TID_ADDBA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_tid_addba_cmd_fixed_param, wmi_peer_tid_addba_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_TID_ADDBA_CMDID);
+
+/* Peer TID DEL BA Cmd */
+#define WMITLV_TABLE_WMI_PEER_TID_DELBA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_tid_delba_cmd_fixed_param, wmi_peer_tid_delba_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_TID_DELBA_CMDID);
+
+/* Peer Req Add BA Ssn for staId/tid pair Cmd */
+#define WMITLV_TABLE_WMI_BA_REQ_SSN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ba_req_ssn_cmd_fixed_param, wmi_ba_req_ssn_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len,WMITLV_TAG_ARRAY_STRUC, wmi_ba_req_ssn, ba_req_ssn_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_BA_REQ_SSN_CMDID);
+
+
+/* PDEV FTM integration Cmd */
+#define WMITLV_TABLE_WMI_PDEV_FTM_INTG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ftm_intg_cmd_fixed_param, wmi_ftm_intg_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_FTM_INTG_CMDID);
+
+/* WOW Wakeup from sleep Cmd */
+#define WMITLV_TABLE_WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wow_hostwakeup_from_sleep_cmd_fixed_param, wmi_wow_hostwakeup_from_sleep_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID);
+
+/* WOW Enable Cmd */
+#define WMITLV_TABLE_WMI_WOW_ENABLE_CMDID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wow_enable_cmd_fixed_param, wmi_wow_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_ENABLE_CMDID);
+
+/* WOW ICMPv6 NA filtering command */
+#define WMITLV_TABLE_WMI_WOW_ENABLE_ICMPV6_NA_FLT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wow_enable_icmpv6_na_flt_cmd_fixed_param, wmi_wow_enable_icmpv6_na_flt_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_ENABLE_ICMPV6_NA_FLT_CMDID);
+
+/* Remove Bcn Filter Cmd */
+#define WMITLV_TABLE_WMI_RMV_BCN_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_rmv_bcn_filter_cmd_fixed_param, wmi_rmv_bcn_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RMV_BCN_FILTER_CMDID);
+
+/** Service bit WMI_SERVICE_ROAM_OFFLOAD for Roaming feature */
+/* Roam scan mode Cmd */
+#define WMITLV_TABLE_WMI_ROAM_SCAN_MODE(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_scan_mode_fixed_param, wmi_roam_scan_mode_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param, wmi_start_scan_cmd_fixed_param, scan_params, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_offload_tlv_param, offload_param, WMITLV_SIZE_VAR)  \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_11i_offload_tlv_param, offload_11i_param, WMITLV_SIZE_VAR)  \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_11r_offload_tlv_param, offload_11r_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_ese_offload_tlv_param, offload_ese_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_tlv_buf_len_param, assoc_ie_len_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, assoc_ie_buf, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SCAN_MODE);
+
+/* Roam scan Rssi Threshold Cmd */
+#define WMITLV_TABLE_WMI_ROAM_SCAN_RSSI_THRESHOLD(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_scan_rssi_threshold_fixed_param, wmi_roam_scan_rssi_threshold_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_scan_extended_threshold_param, extended_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_earlystop_rssi_thres_param, earlystop_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_dense_thres_param, dense_param, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SCAN_RSSI_THRESHOLD);
+
+/* Roam Scan Period Cmd */
+#define WMITLV_TABLE_WMI_ROAM_SCAN_PERIOD(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_scan_period_fixed_param, wmi_roam_scan_period_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SCAN_PERIOD);
+
+/* Roam scan change Rssi Threshold Cmd */
+#define WMITLV_TABLE_WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_scan_rssi_change_threshold_fixed_param, wmi_roam_scan_rssi_change_threshold_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD);
+
+/* Roam Scan Channel list Cmd */
+#define WMITLV_TABLE_WMI_ROAM_CHAN_LIST(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_chan_list_fixed_param, wmi_roam_chan_list_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_CHAN_LIST);
+
+/* Roam scan mode Cmd */
+#define WMITLV_TABLE_WMI_ROAM_SCAN_CMD(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_scan_cmd_fixed_param, wmi_roam_scan_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SCAN_CMD);
+
+/* Roam mbo configuration */
+#define WMITLV_TABLE_WMI_ROAM_SET_MBO_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_set_mbo_fixed_param, wmi_roam_set_mbo_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, cellular_cap, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_supported_operating_class_param, supp_op_class_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, supp_op_class_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_mbo_non_preferred_channel_report_param, non_prefer_ch_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, non_prefer_ch_attr, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SET_MBO_PARAM_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_PLMREQ_START_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_plmreq_start_cmd_fixed_param, wmi_vdev_plmreq_start_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_PLMREQ_START_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_PLMREQ_STOP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_plmreq_stop_cmd_fixed_param, wmi_vdev_plmreq_stop_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_PLMREQ_STOP_CMDID);
+/* Start scan Cmd */
+#define WMITLV_TABLE_WMI_START_SCAN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param, wmi_start_scan_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_ssid, ssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_START_SCAN_CMDID);
+
+/* Scan adaptive dwell mode configuration */
+#define WMITLV_TABLE_WMI_SCAN_ADAPTIVE_DWELL_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_scan_adaptive_dwell_config_fixed_param, wmi_scan_adaptive_dwell_config_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_scan_adaptive_dwell_parameters_tlv, param, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_SCAN_ADAPTIVE_DWELL_CONFIG_CMDID);
+
+/* Start ExtScan Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_START_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_start_cmd_fixed_param, wmi_extscan_start_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_ssid, ssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_data, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_bucket, bucket_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_bucket_channel, channel_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_START_CMDID);
+
+/* Stop ExtScan Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_STOP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_stop_cmd_fixed_param, wmi_extscan_stop_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_STOP_CMDID);
+
+/* Start ExtScan BSSID Monitoring Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param, wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_wlan_change_bssid_param, wlan_change_descriptor_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID);
+
+/* Start Hot List Monitoring Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_monitor_cmd_fixed_param, wmi_extscan_configure_hotlist_monitor_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_hotlist_entry, hotlist, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID);
+
+/* Get ExtScan BSSID/RSSI list Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_get_cached_results_cmd_fixed_param, wmi_extscan_get_cached_results_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID);
+
+/* Get ExtScan BSSID monitor results Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_get_wlan_change_results_cmd_fixed_param, wmi_extscan_get_wlan_change_results_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID);
+
+/* Set ExtScan Capabilities Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_SET_CAPABILITIES_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_set_capabilities_cmd_fixed_param, wmi_extscan_set_capabilities_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_cache_capabilities, extscan_cache_capabilities, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_wlan_change_monitor_capabilities, wlan_change_capabilities, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_hotlist_monitor_capabilities, hotlist_capabilities, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_SET_CAPABILITIES_CMDID);
+
+/* Get ExtScan Capabilities Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_GET_CAPABILITIES_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_get_capabilities_cmd_fixed_param, wmi_extscan_get_capabilities_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_GET_CAPABILITIES_CMDID);
+
+/* Start SSID Hot List Monitoring Cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_ssid_monitor_cmd_fixed_param, wmi_extscan_configure_hotlist_ssid_monitor_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_hotlist_ssid_entry, hotlist_ssid, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID);
+
+/* P2P set vendor ID data Cmd */
+#define WMITLV_TABLE_WMI_P2P_SET_VENDOR_IE_DATA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_set_vendor_ie_data_cmd_fixed_param, wmi_p2p_set_vendor_ie_data_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_P2P_SET_VENDOR_IE_DATA_CMDID);
+
+/* P2P set OppPS parameters Cmd */
+#define WMITLV_TABLE_WMI_P2P_SET_OPPPS_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_set_oppps_cmd_fixed_param, wmi_p2p_set_oppps_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_P2P_SET_OPPPS_PARAM_CMDID);
+
+/* P2P set listen offload start parameters Cmd */
+#define WMITLV_TABLE_WMI_P2P_LISTEN_OFFLOAD_START_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_lo_start_cmd_fixed_param, wmi_p2p_lo_start_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, device_types_data, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, prob_resp_data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_P2P_LISTEN_OFFLOAD_START_CMDID);
+
+/* P2P set listen offload stop parameters Cmd */
+#define WMITLV_TABLE_WMI_P2P_LISTEN_OFFLOAD_STOP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_lo_stop_cmd_fixed_param, wmi_p2p_lo_stop_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_P2P_LISTEN_OFFLOAD_STOP_CMDID);
+
+/* P2P set listen offload stopped parameters Event */
+#define WMITLV_TABLE_WMI_P2P_LISTEN_OFFLOAD_STOPPED_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_lo_stopped_event_fixed_param, wmi_p2p_lo_stopped_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_P2P_LISTEN_OFFLOAD_STOPPED_EVENTID);
+
+/* Pdev set channel Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_CHANNEL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_CHANNEL_CMDID);
+
+/* Echo Cmd */
+#define WMITLV_TABLE_WMI_ECHO_CMDID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_echo_cmd_fixed_param, wmi_echo_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_ECHO_CMDID);
+
+/* Pdev set wmm params */
+#define WMITLV_TABLE_WMI_PDEV_SET_WMM_PARAMS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_wmm_params_cmd_fixed_param, wmi_pdev_set_wmm_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wmm_params, wmi_wmm_params, wmm_params_ac_be, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wmm_params, wmi_wmm_params, wmm_params_ac_bk, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wmm_params, wmi_wmm_params, wmm_params_ac_vi, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wmm_params, wmi_wmm_params, wmm_params_ac_vo, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_WMM_PARAMS_CMDID);
+
+/* Vdev start request Cmd */
+#define WMITLV_TABLE_WMI_VDEV_START_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param, wmi_vdev_start_request_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_p2p_noa_descriptor, noa_descriptors, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_START_REQUEST_CMDID);
+
+/* Vdev restart request cmd */
+#define WMITLV_TABLE_WMI_VDEV_RESTART_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param, wmi_vdev_start_request_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_p2p_noa_descriptor, noa_descriptors, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_RESTART_REQUEST_CMDID);
+
+/* P2P Go set beacon IE cmd */
+#define WMITLV_TABLE_WMI_P2P_GO_SET_BEACON_IE(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_go_set_beacon_ie_fixed_param, wmi_p2p_go_set_beacon_ie_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_P2P_GO_SET_BEACON_IE);
+
+/* GTK offload Cmd */
+#define WMITLV_TABLE_WMI_GTK_OFFLOAD_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_CMD_fixed_param, WMI_GTK_OFFLOAD_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_GTK_OFFLOAD_CMDID);
+
+/* PMF 11w offload Set SA query cmd */
+#define WMITLV_TABLE_WMI_PMF_OFFLOAD_SET_SA_QUERY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_PMF_OFFLOAD_SET_SA_QUERY_CMD_fixed_param, WMI_PMF_OFFLOAD_SET_SA_QUERY_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PMF_OFFLOAD_SET_SA_QUERY_CMDID);
+
+/* Scan channel list Cmd */
+#define WMITLV_TABLE_WMI_SCAN_CHAN_LIST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_scan_chan_list_cmd_fixed_param, wmi_scan_chan_list_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, chan_info, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_SCAN_CHAN_LIST_CMDID);
+
+/* STA UAPSD Auto trigger Cmd */
+#define WMITLV_TABLE_WMI_STA_UAPSD_AUTO_TRIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_cmd_fixed_param, wmi_sta_uapsd_auto_trig_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_sta_uapsd_auto_trig_param, ac_param, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_UAPSD_AUTO_TRIG_CMDID);
+
+/* Probe template Cmd */
+#define WMITLV_TABLE_WMI_PRB_TMPL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_prb_tmpl_cmd_fixed_param, wmi_prb_tmpl_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bcn_prb_info, wmi_bcn_prb_info, bcn_prb_info, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PRB_TMPL_CMDID);
+
+/* Beacon template Cmd */
+#define WMITLV_TABLE_WMI_BCN_TMPL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bcn_tmpl_cmd_fixed_param, wmi_bcn_tmpl_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bcn_prb_info, wmi_bcn_prb_info, bcn_prb_info, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_BCN_TMPL_CMDID);
+
+/* VDEV install key complete Cmd */
+#define WMITLV_TABLE_WMI_VDEV_INSTALL_KEY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_install_key_cmd_fixed_param, wmi_vdev_install_key_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, key_data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_INSTALL_KEY_CMDID);
+
+/* VDEV WNM SLEEP MODE Cmd */
+#define WMITLV_TABLE_WMI_VDEV_WNM_SLEEPMODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_VDEV_WNM_SLEEPMODE_CMD_fixed_param, WMI_VDEV_WNM_SLEEPMODE_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_WNM_SLEEPMODE_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param, WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMDID);
+
+/* Peer Assoc Cmd */
+#define WMITLV_TABLE_WMI_PEER_ASSOC_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_assoc_complete_cmd_fixed_param, wmi_peer_assoc_complete_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, peer_legacy_rates, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, peer_ht_rates, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vht_rate_set, wmi_vht_rate_set, peer_vht_rates, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ASSOC_CMDID);
+
+/* Peer Set Rate Report Condition Cmd */
+#define WMITLV_TABLE_WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_set_rate_report_condition_fixed_param, wmi_peer_set_rate_report_condition_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID);
+
+/* Add Beacon filter Cmd */
+#define WMITLV_TABLE_WMI_ADD_BCN_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_add_bcn_filter_cmd_fixed_param, wmi_add_bcn_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ie_map, WMITLV_SIZE_FIX, BCN_FLT_MAX_ELEMS_IE_LIST)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ADD_BCN_FILTER_CMDID);
+
+/* Sta keepalive cmd */
+#define WMITLV_TABLE_WMI_STA_KEEPALIVE_CMDID(id,op,buf,len)                                           \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_STA_KEEPALIVE_CMD_fixed_param, WMI_STA_KEEPALIVE_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_STA_KEEPALVE_ARP_RESPONSE, WMI_STA_KEEPALVE_ARP_RESPONSE, arp_resp, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_KEEPALIVE_CMDID);
+
+/* ARP NS offload Cmd */
+#define WMITLV_TABLE_WMI_SET_ARP_NS_OFFLOAD_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param, WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_NS_OFFLOAD_TUPLE, ns_tuples, WMITLV_SIZE_FIX, WMI_MAX_NS_OFFLOADS) \
+    WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_ARP_OFFLOAD_TUPLE, arp_tuples, WMITLV_SIZE_FIX, WMI_MAX_ARP_OFFLOADS) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_NS_OFFLOAD_TUPLE, ns_ext_tuples, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_SET_ARP_NS_OFFLOAD_CMDID);
+
+/* AP PS peer param Cmd */
+#define WMITLV_TABLE_WMI_AP_PS_PEER_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ap_ps_peer_cmd_fixed_param, wmi_ap_ps_peer_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_AP_PS_PEER_PARAM_CMDID);
+
+/* AP PS enhanced green ap param Cmd */
+#define WMITLV_TABLE_WMI_AP_PS_EGAP_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ap_ps_egap_param_cmd_fixed_param, wmi_ap_ps_egap_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_AP_PS_EGAP_PARAM_CMDID);
+
+/* Profile Trigger Cmd */
+#define WMITLV_TABLE_WMI_WLAN_PROFILE_TRIGGER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wlan_profile_trigger_cmd_fixed_param, wmi_wlan_profile_trigger_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_PROFILE_TRIGGER_CMDID);
+
+/* WLAN Profile set hist interval Cmd */
+#define WMITLV_TABLE_WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wlan_profile_set_hist_intvl_cmd_fixed_param, wmi_wlan_profile_set_hist_intvl_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID);
+
+/* WLAN Profile get profile data Cmd */
+#define WMITLV_TABLE_WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wlan_profile_get_prof_data_cmd_fixed_param, wmi_wlan_profile_get_prof_data_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID);
+
+/* WLAN Profile enable profile ID Cmd */
+#define WMITLV_TABLE_WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wlan_profile_enable_profile_id_cmd_fixed_param, wmi_wlan_profile_enable_profile_id_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID);
+
+/* WOW Delete Wake Pattern Cmd */
+#define WMITLV_TABLE_WMI_WOW_DEL_WAKE_PATTERN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_DEL_PATTERN_CMD_fixed_param, WMI_WOW_DEL_PATTERN_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_DEL_WAKE_PATTERN_CMDID);
+
+#define WMITLV_TABLE_WMI_WOW_UDP_SVC_OFLD_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param, WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, pattern, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, response, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_UDP_SVC_OFLD_CMDID);
+
+#define WMITLV_TABLE_WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wow_hostwakeup_gpio_pin_pattern_config_cmd_fixed_param, WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMDID);
+
+#define WMITLV_TABLE_WMI_WOW_SET_ACTION_WAKE_UP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wow_set_action_wake_up_cmd_fixed_param, WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_SET_ACTION_WAKE_UP_CMDID);
+
+/* Wow enable/disable wake up Cmd */
+#define WMITLV_TABLE_WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_ADD_DEL_EVT_CMD_fixed_param, WMI_WOW_ADD_DEL_EVT_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID);
+
+/* RTT measurement request Cmd */
+#define WMITLV_TABLE_WMI_RTT_MEASREQ_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RTT_MEASREQ_CMDID);
+
+/* RTT TSF Cmd */
+#define WMITLV_TABLE_WMI_RTT_TSF_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RTT_TSF_CMDID);
+
+/* RTT OEM req Cmd */
+#define WMITLV_TABLE_WMI_OEM_REQ_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_OEM_REQ_CMDID);
+
+/* RTT OEM request Cmd - DEPRECATED */
+#define WMITLV_TABLE_WMI_OEM_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_OEM_REQUEST_CMDID);
+
+/* Spectral scan configure Cmd */
+#define WMITLV_TABLE_WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_spectral_configure_cmd_fixed_param, wmi_vdev_spectral_configure_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID);
+
+/* Spectral scan enable Cmd */
+#define WMITLV_TABLE_WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_spectral_enable_cmd_fixed_param, wmi_vdev_spectral_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID);
+
+/* Request stats Cmd */
+#define WMITLV_TABLE_WMI_REQUEST_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param, wmi_request_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_REQUEST_STATS_CMDID);
+
+/* Request for memory dump stats Cmd */
+#define WMITLV_TABLE_WMI_GET_FW_MEM_DUMP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_get_fw_mem_dump_fixed_param, wmi_get_fw_mem_dump_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_fw_mem_dump, fw_mem_dump_params, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_GET_FW_MEM_DUMP_CMDID);
+
+/* flush debug messages */
+#define WMITLV_TABLE_WMI_DEBUG_MESG_FLUSH_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_debug_mesg_flush_fixed_param, wmi_debug_mesg_flush_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_DEBUG_MESG_FLUSH_CMDID);
+
+/* Request to config the DIAG Events and LOGs*/
+#define WMITLV_TABLE_WMI_DIAG_EVENT_LOG_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_diag_event_log_config_fixed_param, wmi_diag_event_log_config_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, diag_events_logs_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_DIAG_EVENT_LOG_CONFIG_CMDID);
+
+/* Set config params */
+#define WMITLV_TABLE_WMI_START_LINK_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_start_link_stats_cmd_fixed_param, wmi_start_link_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_START_LINK_STATS_CMDID);
+
+/* Request to clear link stats */
+#define WMITLV_TABLE_WMI_CLEAR_LINK_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_clear_link_stats_cmd_fixed_param, wmi_clear_link_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_CLEAR_LINK_STATS_CMDID);
+
+/* Request stats Cmd */
+#define WMITLV_TABLE_WMI_REQUEST_LINK_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_request_link_stats_cmd_fixed_param, wmi_request_link_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_REQUEST_LINK_STATS_CMDID);
+
+/* Network list offload config Cmd */
+#define WMITLV_TABLE_WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nlo_config_cmd_fixed_param, wmi_nlo_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, nlo_configured_parameters, nlo_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, nlo_channel_prediction_cfg, channel_prediction_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_enlo_candidate_score_param, enlo_candidate_score_params, candidate_score_params, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID);
+
+/* Passpoint list offload config Cmd */
+#define WMITLV_TABLE_WMI_PASSPOINT_LIST_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_passpoint_config_cmd_fixed_param, wmi_passpoint_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PASSPOINT_LIST_CONFIG_CMDID);
+
+/* CSA offload enable Cmd */
+#define WMITLV_TABLE_WMI_CSA_OFFLOAD_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_csa_offload_enable_cmd_fixed_param, wmi_csa_offload_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_CSA_OFFLOAD_ENABLE_CMDID);
+
+/* CSA offload channel switch Cmd */
+#define WMITLV_TABLE_WMI_CSA_OFFLOAD_CHANSWITCH_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_csa_offload_chanswitch_cmd_fixed_param, wmi_csa_offload_chanswitch_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_CSA_OFFLOAD_CHANSWITCH_CMDID);
+
+/* Chatter set mode Cmd */
+#define WMITLV_TABLE_WMI_CHATTER_SET_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_chatter_set_mode_cmd_fixed_param, wmi_chatter_set_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_CHATTER_SET_MODE_CMDID);
+
+
+/* PDEV UTF Cmd */
+#define WMITLV_TABLE_WMI_PDEV_UTF_CMDID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_UTF_CMDID);
+
+/* PDEV QVIT Cmd */
+#define WMITLV_TABLE_WMI_PDEV_QVIT_CMDID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_QVIT_CMDID);
+
+#define WMITLV_TABLE_WMI_PDEV_SET_WAKEUP_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param, WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_WAKEUP_CONFIG_CMDID);
+
+/* Vdev Set keep alive Cmd  */
+#define WMITLV_TABLE_WMI_VDEV_SET_KEEPALIVE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_keepalive_cmd_fixed_param, wmi_vdev_set_keepalive_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_KEEPALIVE_CMDID);
+
+/* Vdev Get keep alive Cmd  */
+#define WMITLV_TABLE_WMI_VDEV_GET_KEEPALIVE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_cmd_fixed_param, wmi_vdev_get_keepalive_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_GET_KEEPALIVE_CMDID);
+
+/*FWTEST Set TBTT mode Cmd*/
+#define WMITLV_TABLE_WMI_FWTEST_VDEV_MCC_SET_TBTT_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_mcc_set_tbtt_mode_cmd_fixed_param, wmi_vdev_mcc_set_tbtt_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_FWTEST_VDEV_MCC_SET_TBTT_MODE_CMDID);
+
+/* FWTEST set NoA parameters Cmd */
+#define WMITLV_TABLE_WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_set_noa_cmd_fixed_param, wmi_p2p_set_noa_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_p2p_noa_descriptor, noa_descriptor, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID);
+
+/* Unit test FW */
+#define WMITLV_TABLE_WMI_UNIT_TEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_unit_test_cmd_fixed_param, wmi_unit_test_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, args, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_UNIT_TEST_CMDID);
+
+/* Force Fw Hang Cmd */
+#define WMITLV_TABLE_WMI_FORCE_FW_HANG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_FORCE_FW_HANG_CMD_fixed_param, WMI_FORCE_FW_HANG_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_FORCE_FW_HANG_CMDID);
+
+/* Set Mcast address Cmd */
+#define WMITLV_TABLE_WMI_SET_MCASTBCAST_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param, WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SET_MCASTBCAST_FILTER_CMDID);
+
+/* Enhanced Mcast add/delete filter list cmd */
+#define WMITLV_TABLE_WMI_SET_MULTIPLE_MCAST_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_set_multiple_mcast_filter_cmd_fixed_param, WMI_SET_MULTIPLE_MCAST_FILTER_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, mcast_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SET_MULTIPLE_MCAST_FILTER_CMDID);
+
+/* Set dbglog time stamp sync cmd */
+#define WMITLV_TABLE_WMI_DBGLOG_TIME_STAMP_SYNC_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dbglog_time_stamp_sync_cmd_fixed_param, WMI_DBGLOG_TIME_STAMP_SYNC_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_DBGLOG_TIME_STAMP_SYNC_CMDID);
+
+/* GPIO config Cmd */
+#define WMITLV_TABLE_WMI_GPIO_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_gpio_config_cmd_fixed_param, wmi_gpio_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_GPIO_CONFIG_CMDID);
+
+/* GPIO output Cmd */
+#define WMITLV_TABLE_WMI_GPIO_OUTPUT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_gpio_output_cmd_fixed_param, wmi_gpio_output_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_GPIO_OUTPUT_CMDID);
+
+/* Peer add WDA entry Cmd */
+#define WMITLV_TABLE_WMI_PEER_ADD_WDS_ENTRY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_add_wds_entry_cmd_fixed_param, wmi_peer_add_wds_entry_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ADD_WDS_ENTRY_CMDID);
+
+/*Peer remove WDS entry Cmd */
+#define WMITLV_TABLE_WMI_PEER_REMOVE_WDS_ENTRY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_remove_wds_entry_cmd_fixed_param, wmi_peer_remove_wds_entry_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_REMOVE_WDS_ENTRY_CMDID);
+
+/* Beacon tx Cmd */
+#define WMITLV_TABLE_WMI_BCN_TX_CMDID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bcn_tx_hdr, wmi_bcn_tx_hdr, hdr, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_BCN_TX_CMDID);
+
+/* PDEV send Beacon Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SEND_BCN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bcn_send_from_host_cmd_fixed_param, wmi_bcn_send_from_host_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SEND_BCN_CMDID);
+
+/* Management tx Cmd */
+#define WMITLV_TABLE_WMI_MGMT_TX_CMDID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mgmt_tx_hdr, wmi_mgmt_tx_hdr, hdr, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_MGMT_TX_CMDID);
+
+/* Management tx send cmd */
+#define WMITLV_TABLE_WMI_MGMT_TX_SEND_CMDID(id,op,buf,len)  \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mgmt_tx_send_cmd_fixed_param, wmi_mgmt_tx_send_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_MGMT_TX_SEND_CMDID);
+
+/* ADD clear response Cmd */
+#define WMITLV_TABLE_WMI_ADDBA_CLEAR_RESP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_addba_clear_resp_cmd_fixed_param, wmi_addba_clear_resp_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ADDBA_CLEAR_RESP_CMDID);
+
+/* ADD BA send Cmd */
+#define WMITLV_TABLE_WMI_ADDBA_SEND_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_addba_send_cmd_fixed_param, wmi_addba_send_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ADDBA_SEND_CMDID);
+
+/* DEL BA send Cmd */
+#define WMITLV_TABLE_WMI_DELBA_SEND_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_delba_send_cmd_fixed_param, wmi_delba_send_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_DELBA_SEND_CMDID);
+
+/* ADD BA set response Cmd */
+#define WMITLV_TABLE_WMI_ADDBA_SET_RESP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_addba_setresponse_cmd_fixed_param, wmi_addba_setresponse_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ADDBA_SET_RESP_CMDID);
+
+/* Send single AMSDU Cmd */
+#define WMITLV_TABLE_WMI_SEND_SINGLEAMSDU_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_send_singleamsdu_cmd_fixed_param, wmi_send_singleamsdu_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_SEND_SINGLEAMSDU_CMDID);
+
+/* PDev Packet Log enable Cmd */
+#define WMITLV_TABLE_WMI_PDEV_PKTLOG_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_pktlog_enable_cmd_fixed_param, wmi_pdev_pktlog_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_PKTLOG_ENABLE_CMDID);
+
+/* PDev Packet Log disable Cmd */
+#define WMITLV_TABLE_WMI_PDEV_PKTLOG_DISABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_pktlog_disable_cmd_fixed_param, wmi_pdev_pktlog_disable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_PKTLOG_DISABLE_CMDID);
+
+/* PDev set HT Cap IE Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_HT_CAP_IE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_ht_ie_cmd_fixed_param, wmi_pdev_set_ht_ie_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_HT_CAP_IE_CMDID);
+
+/* PDev set VHT Cap IE Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_VHT_CAP_IE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_vht_ie_cmd_fixed_param, wmi_pdev_set_vht_ie_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_VHT_CAP_IE_CMDID);
+
+/* PDev Set DSCP to TID map Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_DSCP_TID_MAP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_dscp_tid_map_cmd_fixed_param, wmi_pdev_set_dscp_tid_map_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_DSCP_TID_MAP_CMDID);
+
+/* PDev Green AP PS enable Cmd */
+#define WMITLV_TABLE_WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_green_ap_ps_enable_cmd_fixed_param, wmi_pdev_green_ap_ps_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID);
+
+/* PDEV Get TPC Config Cmd */
+#define WMITLV_TABLE_WMI_PDEV_GET_TPC_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_get_tpc_config_cmd_fixed_param, wmi_pdev_get_tpc_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_TPC_CONFIG_CMDID);
+
+/* PDEV Set Base Mac Address Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_BASE_MACADDR_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_base_macaddr_cmd_fixed_param, wmi_pdev_set_base_macaddr_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_BASE_MACADDR_CMDID);
+
+/* MIB Stats*/
+#define WMITLV_TABLE_WMI_MIB_STATS_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mib_stats_enable_cmd_fixed_param, wmi_mib_stats_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_MIB_STATS_ENABLE_CMDID);
+
+/* Peer multicast group Cmd */
+#define WMITLV_TABLE_WMI_PEER_MCAST_GROUP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_mcast_group_cmd_fixed_param, wmi_peer_mcast_group_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_MCAST_GROUP_CMDID);
+
+/* Roam AP profile Cmd */
+#define WMITLV_TABLE_WMI_ROAM_AP_PROFILE(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_ap_profile_fixed_param, wmi_roam_ap_profile_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ap_profile, wmi_ap_profile, ap_profile, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_AP_PROFILE);
+
+/* Roam sync complete Cmd */
+#define WMITLV_TABLE_WMI_ROAM_SYNCH_COMPLETE(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_synch_complete_fixed_param, wmi_roam_synch_complete_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SYNCH_COMPLETE);
+
+#define WMITLV_TABLE_WMI_ROAM_SET_RIC_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ric_request_fixed_param, wmi_ric_request_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ric_tspec, ric_tspec_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SET_RIC_REQUEST_CMDID);
+
+/* Scan scheduler priority Table Cmd */
+#define WMITLV_TABLE_WMI_SCAN_SCH_PRIO_TBL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_scan_sch_priority_table_cmd_fixed_param, wmi_scan_sch_priority_table_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, mapping_table, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_SCAN_SCH_PRIO_TBL_CMDID);
+
+/* PDEV DFS enable Cmd */
+#define WMITLV_TABLE_WMI_PDEV_DFS_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_dfs_enable_cmd_fixed_param, wmi_pdev_dfs_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_DFS_ENABLE_CMDID);
+
+/* PDEV DFS disable Cmd */
+#define WMITLV_TABLE_WMI_PDEV_DFS_DISABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_dfs_disable_cmd_fixed_param, wmi_pdev_dfs_disable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_DFS_DISABLE_CMDID);
+
+/* DFS phyerr parse/filter offload enable Cmd */
+#define WMITLV_TABLE_WMI_DFS_PHYERR_FILTER_ENA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_ena_cmd_fixed_param, wmi_dfs_phyerr_filter_ena_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_DFS_PHYERR_FILTER_ENA_CMDID);
+
+/* DFS phyerr parse/filter offload disable Cmd */
+#define WMITLV_TABLE_WMI_DFS_PHYERR_FILTER_DIS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_dis_cmd_fixed_param, wmi_dfs_phyerr_filter_dis_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_DFS_PHYERR_FILTER_DIS_CMDID);
+
+/* WOW Add Wake Pattern Cmd */
+#define WMITLV_TABLE_WMI_WOW_ADD_WAKE_PATTERN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_ADD_PATTERN_CMD_fixed_param, WMI_WOW_ADD_PATTERN_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_BITMAP_PATTERN_T, pattern_info_bitmap, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_IPV4_SYNC_PATTERN_T, pattern_info_ipv4, WMITLV_SIZE_VAR)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_IPV6_SYNC_PATTERN_T, pattern_info_ipv6, WMITLV_SIZE_VAR)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_MAGIC_PATTERN_CMD, pattern_info_magic_pattern, WMITLV_SIZE_VAR)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, pattern_info_timeout, WMITLV_SIZE_VAR) \
+    WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ra_ratelimit_interval, WMITLV_SIZE_FIX, 1)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_ADD_WAKE_PATTERN_CMDID);
+
+/* IOAC add keep alive cmd. */
+#define WMITLV_TABLE_WMI_WOW_IOAC_ADD_KEEPALIVE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_KEEPALIVE_CMD_fixed_param, WMI_WOW_IOAC_ADD_KEEPALIVE_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_WOW_IOAC_KEEPALIVE_T, keepalive_set, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_IOAC_ADD_KEEPALIVE_CMDID);
+
+/* IOAC del keep alive cmd. */
+#define WMITLV_TABLE_WMI_WOW_IOAC_DEL_KEEPALIVE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_KEEPALIVE_CMD_fixed_param, WMI_WOW_IOAC_DEL_KEEPALIVE_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_IOAC_DEL_KEEPALIVE_CMDID);
+
+/* WOW IOAC Add Wake Pattern Cmd */
+#define WMITLV_TABLE_WMI_WOW_IOAC_ADD_WAKE_PATTERN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_PATTERN_CMD_fixed_param, WMI_WOW_IOAC_ADD_PATTERN_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_IOAC_PKT_PATTERN_T, pattern_info_pkt, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_IOAC_TMR_PATTERN_T, pattern_info_tmr, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_IOAC_SOCK_PATTERN_T, pattern_info_sock, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_IOAC_ADD_WAKE_PATTERN_CMDID);
+
+/* WOW IOAC Delete Wake Pattern Cmd */
+#define WMITLV_TABLE_WMI_WOW_IOAC_DEL_WAKE_PATTERN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_PATTERN_CMD_fixed_param, WMI_WOW_IOAC_DEL_PATTERN_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_IOAC_DEL_WAKE_PATTERN_CMDID);
+
+/* extwow enable Cmd */
+#define WMITLV_TABLE_WMI_EXTWOW_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extwow_enable_cmd_fixed_param, wmi_extwow_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTWOW_ENABLE_CMDID);
+
+/* extwow set wakeup params cmd for app type1 */
+#define WMITLV_TABLE_WMI_EXTWOW_SET_APP_TYPE1_PARAMS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extwow_set_app_type1_params_cmd_fixed_param, wmi_extwow_set_app_type1_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTWOW_SET_APP_TYPE1_PARAMS_CMDID);
+
+/* extwow set wakeup params cmd for app type2 */
+#define WMITLV_TABLE_WMI_EXTWOW_SET_APP_TYPE2_PARAMS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extwow_set_app_type2_params_cmd_fixed_param, wmi_extwow_set_app_type2_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTWOW_SET_APP_TYPE2_PARAMS_CMDID);
+
+/* Stop scan Cmd */
+#define WMITLV_TABLE_WMI_STOP_SCAN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param, wmi_stop_scan_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STOP_SCAN_CMDID);
+
+#define WMITLV_TABLE_WMI_PDEV_SET_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_param_cmd_fixed_param, wmi_pdev_set_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_PARAM_CMDID);
+
+/* PDev set quiet Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_QUIET_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_quiet_cmd_fixed_param, wmi_pdev_set_quiet_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_QUIET_MODE_CMDID);
+
+/* VDev set quiet Cmd */
+#define WMITLV_TABLE_WMI_VDEV_SET_QUIET_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_quiet_cmd_fixed_param, wmi_vdev_set_quiet_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_QUIET_MODE_CMDID);
+
+/* Setting custom aggregation size using command */
+#define WMITLV_TABLE_WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_custom_aggr_size_cmd_fixed_param, wmi_vdev_set_custom_aggr_size_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID);
+
+/* Vdev create Cmd */
+#define WMITLV_TABLE_WMI_VDEV_CREATE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_create_cmd_fixed_param, wmi_vdev_create_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_txrx_streams, cfg_txrx_streams, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_CREATE_CMDID);
+
+/* Vdev delete Cmd */
+#define WMITLV_TABLE_WMI_VDEV_DELETE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_delete_cmd_fixed_param, wmi_vdev_delete_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_DELETE_CMDID);
+
+/* Vdev up Cmd */
+#define WMITLV_TABLE_WMI_VDEV_UP_CMDID(id,op,buf,len)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_up_cmd_fixed_param, wmi_vdev_up_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_UP_CMDID);
+
+/* Vdev stop cmd */
+#define WMITLV_TABLE_WMI_VDEV_STOP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_stop_cmd_fixed_param, wmi_vdev_stop_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_STOP_CMDID);
+
+/* Vdev down Cmd */
+#define WMITLV_TABLE_WMI_VDEV_DOWN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_down_cmd_fixed_param, wmi_vdev_down_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_DOWN_CMDID);
+
+/* Vdev set param Cmd */
+#define WMITLV_TABLE_WMI_VDEV_SET_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_param_cmd_fixed_param, wmi_vdev_set_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_PARAM_CMDID);
+
+/* Pdev suspend Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SUSPEND_CMDID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_suspend_cmd_fixed_param, wmi_pdev_suspend_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SUSPEND_CMDID);
+
+/* Pdev Resume Cmd */
+#define WMITLV_TABLE_WMI_PDEV_RESUME_CMDID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_resume_cmd_fixed_param, wmi_pdev_resume_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_RESUME_CMDID);
+
+#define WMITLV_TABLE_WMI_SCAN_UPDATE_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_scan_update_request_cmd_fixed_param, wmi_scan_update_request_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_SCAN_UPDATE_REQUEST_CMDID);
+
+#define WMITLV_TABLE_WMI_SCAN_PROB_REQ_OUI_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_scan_prob_req_oui_cmd_fixed_param, wmi_scan_prob_req_oui_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_SCAN_PROB_REQ_OUI_CMDID);
+
+#define WMITLV_TABLE_WMI_CHATTER_ADD_COALESCING_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len,WMITLV_TAG_STRUC_wmi_chatter_coalescing_add_filter_cmd_fixed_param, wmi_chatter_coalescing_add_filter_cmd_fixed_param, fixed_param,WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, chatter_pkt_coalescing_filter, coalescing_filter, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_CHATTER_ADD_COALESCING_FILTER_CMDID);
+
+#define WMITLV_TABLE_WMI_CHATTER_DELETE_COALESCING_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_chatter_coalescing_delete_filter_cmd_fixed_param,wmi_chatter_coalescing_delete_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+
+WMITLV_CREATE_PARAM_STRUC(WMI_CHATTER_DELETE_COALESCING_FILTER_CMDID);
+
+#define WMITLV_TABLE_WMI_CHATTER_COALESCING_QUERY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_chatter_coalescing_query_cmd_fixed_param, wmi_chatter_coalescing_query_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+
+WMITLV_CREATE_PARAM_STRUC(WMI_CHATTER_COALESCING_QUERY_CMDID);
+
+#define WMITLV_TABLE_WMI_TXBF_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len,WMITLV_TAG_STRUC_wmi_txbf_cmd_fixed_param, wmi_txbf_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+
+WMITLV_CREATE_PARAM_STRUC(WMI_TXBF_CMDID);
+
+#define WMITLV_TABLE_WMI_DBGLOG_CFG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_debug_log_config_cmd_fixed_param, wmi_debug_log_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_FXAR(id,op,buf,len,WMITLV_TAG_ARRAY_UINT32, A_UINT32, module_id_bitmap, WMITLV_SIZE_FIX, MAX_MODULE_ID_BITMAP_WORDS) \
+
+WMITLV_CREATE_PARAM_STRUC(WMI_DBGLOG_CFG_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_WMM_ADDTS_CMDID(id,op,buf,len)                                           \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_wmm_addts_cmd_fixed_param, wmi_vdev_wmm_addts_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_WMM_ADDTS_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_WMM_DELTS_CMDID(id,op,buf,len)                                           \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_wmm_delts_cmd_fixed_param, wmi_vdev_wmm_delts_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_WMM_DELTS_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_SET_WMM_PARAMS_CMDID(id,op,buf,len)                                           \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_wmm_params_cmd_fixed_param, wmi_vdev_set_wmm_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_WMM_PARAMS_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_SET_GTX_PARAMS_CMDID(id,op,buf,len)                                           \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_gtx_params_cmd_fixed_param, wmi_vdev_set_gtx_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_GTX_PARAMS_CMDID);
+
+/* TDLS Enable/Disable Cmd */
+#define WMITLV_TABLE_WMI_TDLS_SET_STATE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tdls_set_state_cmd_fixed_param, \
+            wmi_tdls_set_state_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_TDLS_SET_STATE_CMDID);
+
+/* TDLS Peer Update Cmd */
+#define WMITLV_TABLE_WMI_TDLS_PEER_UPDATE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tdls_peer_update_cmd_fixed_param, wmi_tdls_peer_update_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tdls_peer_capabilities, wmi_tdls_peer_capabilities, peer_caps, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, peer_chan_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_TDLS_PEER_UPDATE_CMDID);
+
+/* Enable/Disable TDLS Offchannel Cmd */
+#define WMITLV_TABLE_WMI_TDLS_SET_OFFCHAN_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tdls_set_offchan_mode_cmd_fixed_param, \
+            wmi_tdls_set_offchan_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_TDLS_SET_OFFCHAN_MODE_CMDID);
+
+
+/* Resmgr Enable/Disable Adaptive OCS CMD */
+#define WMITLV_TABLE_WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param, \
+            wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID);
+
+/* Resmgr Set Channel Time Quota CMD */
+#define WMITLV_TABLE_WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_resmgr_set_chan_time_quota_cmd_fixed_param, \
+            wmi_resmgr_set_chan_time_quota_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID);
+
+/* Resmgr Set Channel Latency CMD */
+#define WMITLV_TABLE_WMI_RESMGR_SET_CHAN_LATENCY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_resmgr_set_chan_latency_cmd_fixed_param, \
+            wmi_resmgr_set_chan_latency_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)  \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RESMGR_SET_CHAN_LATENCY_CMDID);
+
+/* STA SMPS Force Mode CMD */
+#define WMITLV_TABLE_WMI_STA_SMPS_FORCE_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_cmd_fixed_param, \
+            wmi_sta_smps_force_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_SMPS_FORCE_MODE_CMDID);
+
+/* wlan hb enable/disable CMD */
+#define WMITLV_TABLE_WMI_HB_SET_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_hb_set_enable_cmd_fixed_param, \
+            wmi_hb_set_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_HB_SET_ENABLE_CMDID);
+
+/* wlan hb set tcp params CMD */
+#define WMITLV_TABLE_WMI_HB_SET_TCP_PARAMS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_hb_set_tcp_params_cmd_fixed_param, \
+            wmi_hb_set_tcp_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_HB_SET_TCP_PARAMS_CMDID);
+
+/* wlan hb set tcp pkt filter CMD */
+#define WMITLV_TABLE_WMI_HB_SET_TCP_PKT_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_hb_set_tcp_pkt_filter_cmd_fixed_param, \
+            wmi_hb_set_tcp_pkt_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_HB_SET_TCP_PKT_FILTER_CMDID);
+
+/* wlan set udp params CMD */
+#define WMITLV_TABLE_WMI_HB_SET_UDP_PARAMS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_hb_set_udp_params_cmd_fixed_param, \
+            wmi_hb_set_udp_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_HB_SET_UDP_PARAMS_CMDID);
+
+/* wlan hb set udp pkt filter CMD */
+#define WMITLV_TABLE_WMI_HB_SET_UDP_PKT_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_hb_set_udp_pkt_filter_cmd_fixed_param, \
+            wmi_hb_set_udp_pkt_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_HB_SET_UDP_PKT_FILTER_CMDID);
+
+/* STA SMPS Param CMD */
+#define WMITLV_TABLE_WMI_STA_SMPS_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sta_smps_param_cmd_fixed_param, \
+            wmi_sta_smps_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_SMPS_PARAM_CMDID);
+
+/* MCC Adaptive Scheduler Traffic Stats */
+#define WMITLV_TABLE_WMI_MCC_SCHED_TRAFFIC_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mcc_sched_traffic_stats_cmd_fixed_param, wmi_mcc_sched_traffic_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_ARRAY_STRUC, wmi_mcc_sched_sta_traffic_stats, mcc_sched_sta_traffic_stats_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_MCC_SCHED_TRAFFIC_STATS_CMDID);
+
+#define WMITLV_TABLE_WMI_BATCH_SCAN_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_batch_scan_enable_cmd_fixed_param, wmi_batch_scan_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+
+WMITLV_CREATE_PARAM_STRUC(WMI_BATCH_SCAN_ENABLE_CMDID);
+
+#define WMITLV_TABLE_WMI_PEER_INFO_REQ_CMDID(id,op,buf,len)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_info_req_cmd_fixed_param, \
+    wmi_peer_info_req_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_INFO_REQ_CMDID);
+
+#define WMITLV_TABLE_WMI_PEER_ANTDIV_INFO_REQ_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_antdiv_info_req_cmd_fixed_param, \
+    wmi_peer_antdiv_info_req_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+ 
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ANTDIV_INFO_REQ_CMDID);
+
+#define WMITLV_TABLE_WMI_RMC_SET_MODE_CMDID(id,op,buf,len)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param, \
+    wmi_rmc_set_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RMC_SET_MODE_CMDID);
+
+#define WMITLV_TABLE_WMI_RMC_SET_ACTION_PERIOD_CMDID(id,op,buf,len)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_rmc_set_action_period_cmd_fixed_param, \
+    wmi_rmc_set_action_period_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RMC_SET_ACTION_PERIOD_CMDID);
+
+#define WMITLV_TABLE_WMI_RMC_CONFIG_CMDID(id,op,buf,len)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_rmc_config_cmd_fixed_param, \
+    wmi_rmc_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RMC_CONFIG_CMDID);
+
+#define WMITLV_TABLE_WMI_MHF_OFFLOAD_SET_MODE_CMDID(id,op,buf,len)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mhf_offload_set_mode_cmd_fixed_param, \
+    wmi_mhf_offload_set_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_MHF_OFFLOAD_SET_MODE_CMDID);
+
+#define WMITLV_TABLE_WMI_MHF_OFFLOAD_PLUMB_ROUTING_TBL_CMDID(id,op,buf,len)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mhf_offload_plumb_routing_table_cmd_fixed_param, \
+                wmi_mhf_offload_plumb_routing_table_cmd, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_mhf_offload_routing_table_entry, \
+                routing_tbl_entries, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_MHF_OFFLOAD_PLUMB_ROUTING_TBL_CMDID);
+
+#define WMITLV_TABLE_WMI_BATCH_SCAN_DISABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_batch_scan_disable_cmd_fixed_param, wmi_batch_scan_disable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_BATCH_SCAN_DISABLE_CMDID);
+
+#define WMITLV_TABLE_WMI_BATCH_SCAN_TRIGGER_RESULT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_batch_scan_trigger_result_cmd_fixed_param, wmi_batch_scan_trigger_result_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_BATCH_SCAN_TRIGGER_RESULT_CMDID);
+
+/* LPI mgmt snooping config Cmd */
+#define WMITLV_TABLE_WMI_LPI_MGMT_SNOOPING_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_lpi_mgmt_snooping_config_cmd_fixed_param, wmi_lpi_mgmt_snooping_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_LPI_MGMT_SNOOPING_CONFIG_CMDID);
+
+/* LPI start scan Cmd */
+#define WMITLV_TABLE_WMI_LPI_START_SCAN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_lpi_start_scan_cmd_fixed_param, wmi_lpi_start_scan_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_ssid, ssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_data, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_LPI_START_SCAN_CMDID);
+
+/* LPI stop scan Cmd */
+#define WMITLV_TABLE_WMI_LPI_STOP_SCAN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_lpi_stop_scan_cmd_fixed_param, wmi_lpi_stop_scan_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_LPI_STOP_SCAN_CMDID);
+
+#define WMITLV_TABLE_WMI_LPI_RESULT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_lpi_result_event_fixed_param, wmi_lpi_result_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_LPI_RESULT_EVENTID);
+
+/* LPI Status Event */
+#define WMITLV_TABLE_WMI_LPI_STATUS_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_lpi_status_event_fixed_param, wmi_lpi_status_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_LPI_STATUS_EVENTID);
+
+/* LPI Handoff Event */
+#define WMITLV_TABLE_WMI_LPI_HANDOFF_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_lpi_handoff_event_fixed_param, wmi_lpi_handoff_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_LPI_HANDOFF_EVENTID);
+
+/* Thermal Manager Params*/
+#define WMITLV_TABLE_WMI_THERMAL_MGMT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_thermal_mgmt_cmd_fixed_param, wmi_thermal_mgmt_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_THERMAL_MGMT_CMDID);
+
+
+#define WMITLV_TABLE_WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param, WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, pattern, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID);
+
+#define WMITLV_TABLE_WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param, WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID);
+
+/* NaN Request */
+#define WMITLV_TABLE_WMI_NAN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nan_cmd_param, wmi_nan_cmd_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NAN_CMDID);
+
+/* NAN Data Get Capabilities Cmd */
+#define WMITLV_TABLE_WMI_NDI_GET_CAP_REQ_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndi_get_cap_req_fixed_param, wmi_ndi_get_cap_req_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDI_GET_CAP_REQ_CMDID);
+
+/** NAN Data Initiator Request Cmd
+ *
+ * TLV (tag length value ) parameters follow the ndp_initiator_req
+ * structure. The TLV's are:
+ * wmi_channel channel;
+ * A_UINT8 ndp_cfg[];
+ * A_UINT8 ndp_app_info[];
+ */
+#define WMITLV_TABLE_WMI_NDP_INITIATOR_REQ_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_initiator_req_fixed_param, wmi_ndp_initiator_req_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, channel, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_cfg, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_app_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_INITIATOR_REQ_CMDID);
+
+/** NAN Data Responder Request Cmd
+ * TLV (tag length value ) parameters follow the ndp_responder_req
+ * structure. The TLV's are:
+ * A_UINT8 ndp_cfg[];
+ * A_UINT8 ndp_app_info[];
+ */
+#define WMITLV_TABLE_WMI_NDP_RESPONDER_REQ_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_responder_req_fixed_param, wmi_ndp_responder_req_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_cfg, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_app_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_RESPONDER_REQ_CMDID);
+
+/** NAN Data End Request Cmd
+ *
+ * TLV (tag length value ) parameters follow the ndp_end_req
+ * structure. The TLV's are:
+ * wmi_ndp_end_req wmi_ndp_end_req_list[];
+ */
+#define WMITLV_TABLE_WMI_NDP_END_REQ_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_end_req_fixed_param, wmi_ndp_end_req_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ndp_end_req_PROTOTYPE, ndp_end_req_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_END_REQ_CMDID);
+
+/* Modem power state cmd */
+#define WMITLV_TABLE_WMI_MODEM_POWER_STATE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_modem_power_state_cmd_param, wmi_modem_power_state_cmd_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MODEM_POWER_STATE_CMDID);
+
+/* get estimated link speed cmd */
+#define WMITLV_TABLE_WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_get_estimated_linkspeed_cmd_fixed_param, wmi_peer_get_estimated_linkspeed_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID);
+
+/* ext stats Request */
+#define WMITLV_TABLE_WMI_REQUEST_STATS_EXT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_req_stats_ext_cmd_fixed_param, wmi_req_stats_ext_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_REQUEST_STATS_EXT_CMDID);
+
+/* 2.4Ghz HT40 OBSS scan enable */
+#define WMITLV_TABLE_WMI_OBSS_SCAN_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_obss_scan_enable_cmd_fixed_param, wmi_obss_scan_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, channels, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_field, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_OBSS_SCAN_ENABLE_CMDID);
+
+/* 2.4Ghz HT40 OBSS scan disable */
+#define WMITLV_TABLE_WMI_OBSS_SCAN_DISABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_obss_scan_disable_cmd_fixed_param, wmi_obss_scan_disable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OBSS_SCAN_DISABLE_CMDID);
+
+/* Pdev Set LED Config Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_LED_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_led_config_cmd_fixed_param, wmi_pdev_set_led_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_LED_CONFIG_CMDID);
+
+/* host auto shut down config cmd */
+#define WMITLV_TABLE_WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_host_auto_shutdown_cfg_cmd_fixed_param, wmi_host_auto_shutdown_cfg_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID);
+
+/* tpc chainmask config cmd */
+#define WMITLV_TABLE_WMI_TPC_CHAINMASK_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tpc_chainmask_config_cmd_fixed_param, wmi_tpc_chainmask_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)  \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_tpc_chainmask_config, config_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_TPC_CHAINMASK_CONFIG_CMDID);
+
+
+/* Ch avoidance update cmd */
+#define WMITLV_TABLE_WMI_CHAN_AVOID_UPDATE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_chan_avoid_update_cmd_param, wmi_chan_avoid_update_cmd_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_CHAN_AVOID_UPDATE_CMDID);
+
+/* Ch avoidance report allow/disallow cmd*/
+#define WMITLV_TABLE_WMI_CHAN_AVOID_RPT_ALLOW_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param, WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_CHAN_AVOID_RPT_ALLOW_CMDID);
+
+/* D0-WOW Enable Disable Cmd */
+#define WMITLV_TABLE_WMI_D0_WOW_ENABLE_DISABLE_CMDID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_d0_wow_enable_disable_cmd_fixed_param, wmi_d0_wow_enable_disable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_D0_WOW_ENABLE_DISABLE_CMDID);
+
+/* Pdev get chip temperature Cmd */
+#define WMITLV_TABLE_WMI_PDEV_GET_TEMPERATURE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_get_temperature_cmd_fixed_param, wmi_pdev_get_temperature_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_TEMPERATURE_CMDID);	
+
+/* Pdev get ANT DIV feature status Cmd */
+#define WMITLV_TABLE_WMI_PDEV_GET_ANTDIV_STATUS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_get_antdiv_status_cmd_fixed_param, wmi_pdev_get_antdiv_status_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_ANTDIV_STATUS_CMDID);
+
+/* Set antenna diversity Cmd */
+#define WMITLV_TABLE_WMI_SET_ANTENNA_DIVERSITY_CMDID(id,op,buf,len) \
+WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_pdev_set_antenna_diversity_cmd_fixed_param, wmi_pdev_set_antenna_diversity_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SET_ANTENNA_DIVERSITY_CMDID);
+
+/* Set rssi monitoring config Cmd */
+#define WMITLV_TABLE_WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID(id,op,buf,len) \
+WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_rssi_breach_monitor_config_fixed_param, wmi_rssi_breach_monitor_config_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID);
+
+/* DHCP server offload param Cmd */
+#define WMITLV_TABLE_WMI_SET_DHCP_SERVER_OFFLOAD_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_set_dhcp_server_offload_cmd_fixed_param, wmi_set_dhcp_server_offload_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SET_DHCP_SERVER_OFFLOAD_CMDID);
+
+/* IPA Offload Enable Disable Cmd */
+#define WMITLV_TABLE_WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMDID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUCT_wmi_ipa_offload_enable_disable_cmd_fixed_param, wmi_ipa_offload_enable_disable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMDID);
+
+/* Set LED flashing parameter Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_LED_FLASHING_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_set_led_flashing_cmd_fixed_param, wmi_set_led_flashing_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_LED_FLASHING_CMDID);
+
+/* mDNS responder offload param Cmd */
+#define WMITLV_TABLE_WMI_MDNS_OFFLOAD_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mdns_offload_cmd_fixed_param, wmi_mdns_offload_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MDNS_OFFLOAD_ENABLE_CMDID);
+
+#define WMITLV_TABLE_WMI_MDNS_SET_FQDN_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mdns_set_fqdn_cmd_fixed_param, wmi_mdns_set_fqdn_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, fqdn_data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_MDNS_SET_FQDN_CMDID);
+
+#define WMITLV_TABLE_WMI_MDNS_SET_RESPONSE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mdns_set_resp_cmd_fixed_param, wmi_mdns_set_resp_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, resp_data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_MDNS_SET_RESPONSE_CMDID);
+
+#define WMITLV_TABLE_WMI_MDNS_GET_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mdns_get_stats_cmd_fixed_param, wmi_mdns_get_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MDNS_GET_STATS_CMDID);
+
+/* roam invoke Cmd */
+#define WMITLV_TABLE_WMI_ROAM_INVOKE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_invoke_cmd_fixed_param, wmi_roam_invoke_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_INVOKE_CMDID);
+
+/* SAP Authentication offload param Cmd */
+#define WMITLV_TABLE_WMI_SAP_OFL_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sap_ofl_enable_cmd_fixed_param, wmi_sap_ofl_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, psk, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SAP_OFL_ENABLE_CMDID);
+
+/* SAP set blacklist param cmd */
+#define WMITLV_TABLE_WMI_SAP_SET_BLACKLIST_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sap_set_blacklist_param_cmd_fixed_param, wmi_sap_set_blacklist_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SAP_SET_BLACKLIST_PARAM_CMDID);
+
+/* APFIND Request */
+#define WMITLV_TABLE_WMI_APFIND_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_apfind_cmd_param, wmi_apfind_cmd_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_APFIND_CMDID);
+
+/* Set OCB schedule cmd, DEPRECATED */
+#define WMITLV_TABLE_WMI_OCB_SET_SCHED_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_ocb_set_sched_cmd_fixed_param, wmi_ocb_set_sched_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_SET_SCHED_CMDID);
+
+/* Set OCB configuration cmd */
+#define WMITLV_TABLE_WMI_OCB_SET_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ocb_set_config_cmd_fixed_param, wmi_ocb_set_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, chan_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ocb_channel, ocb_chan_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_qos_parameter, qos_parameter_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dcc_ndl_chan, chan_cfg, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dcc_ndl_active_state_config, ndl_active_state_config_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ocb_schedule_element, schedule_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_SET_CONFIG_CMDID);
+
+/* Set UTC time cmd */
+#define WMITLV_TABLE_WMI_OCB_SET_UTC_TIME_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ocb_set_utc_time_cmd_fixed_param, wmi_ocb_set_utc_time_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_SET_UTC_TIME_CMDID);
+
+/* Start timing advertisement cmd */
+#define WMITLV_TABLE_WMI_OCB_START_TIMING_ADVERT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ocb_start_timing_advert_cmd_fixed_param, wmi_ocb_start_timing_advert_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_START_TIMING_ADVERT_CMDID);
+
+/* Stop timing advertisement cmd */
+#define WMITLV_TABLE_WMI_OCB_STOP_TIMING_ADVERT_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ocb_stop_timing_advert_cmd_fixed_param, wmi_ocb_stop_timing_advert_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_STOP_TIMING_ADVERT_CMDID);
+
+/* Get TSF timer cmd */
+#define WMITLV_TABLE_WMI_OCB_GET_TSF_TIMER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_cmd_fixed_param, wmi_ocb_get_tsf_timer_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_GET_TSF_TIMER_CMDID);
+
+/* Get DCC stats cmd */
+#define WMITLV_TABLE_WMI_DCC_GET_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dcc_get_stats_cmd_fixed_param, wmi_dcc_get_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dcc_channel_stats_request, channel_stats_request, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DCC_GET_STATS_CMDID);
+
+/* Clear DCC stats cmd */
+#define WMITLV_TABLE_WMI_DCC_CLEAR_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dcc_clear_stats_cmd_fixed_param, wmi_dcc_clear_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_DCC_CLEAR_STATS_CMDID);
+
+/* Update DCC NDL cmd */
+#define WMITLV_TABLE_WMI_DCC_UPDATE_NDL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dcc_update_ndl_cmd_fixed_param, wmi_dcc_update_ndl_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dcc_ndl_chan, chan_ndl_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dcc_ndl_active_state_config, ndl_active_state_config_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DCC_UPDATE_NDL_CMDID);
+
+/* Roam filter cmd */
+#define WMITLV_TABLE_WMI_ROAM_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_filter_fixed_param, wmi_roam_filter_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_black_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_ssid, ssid_white_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_preferred_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, bssid_preferred_factor, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_FILTER_CMDID);
+
+/* TSF timestamp action cmd */
+#define WMITLV_TABLE_WMI_VDEV_TSF_TSTAMP_ACTION_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param, wmi_vdev_tsf_tstamp_action_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_TSF_TSTAMP_ACTION_CMDID);
+
+/* LFR subnet change config Cmd */
+#define WMITLV_TABLE_WMI_ROAM_SUBNET_CHANGE_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_subnet_change_config_fixed_param, wmi_roam_subnet_change_config_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, skip_subnet_change_detection_bssid_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SUBNET_CHANGE_CONFIG_CMDID);
+
+/* Set the SOC Preferred Channel List (PCL) Cmd - DEPRECATED */
+#define WMITLV_TABLE_WMI_SOC_SET_PCL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_soc_set_pcl_cmd_fixed_param, wmi_soc_set_pcl_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SOC_SET_PCL_CMDID);
+
+/* Set the PDEV Preferred Channel List (PCL) Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_PCL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_pcl_cmd_fixed_param, wmi_pdev_set_pcl_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_weight, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_PCL_CMDID);
+
+/* Set the SOC Hardware Mode Cmd - DEPRECATED */
+#define WMITLV_TABLE_WMI_SOC_SET_HW_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_cmd_fixed_param, wmi_soc_set_hw_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SOC_SET_HW_MODE_CMDID);
+
+/* Set the PDEV Hardware Mode Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_HW_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_cmd_fixed_param, wmi_pdev_set_hw_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_HW_MODE_CMDID);
+
+/* Set the SOC Dual MAC Config Cmd - DEPRECATED */
+#define WMITLV_TABLE_WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_cmd_fixed_param, wmi_soc_set_dual_mac_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID);
+
+/* Set the PDEV MAC Config Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_MAC_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_cmd_fixed_param, wmi_pdev_set_mac_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_MAC_CONFIG_CMDID);
+
+/* Set the SOC Antenna Mode Cmd - DEPRECATED */
+#define WMITLV_TABLE_WMI_SOC_SET_ANTENNA_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_soc_set_antenna_mode_cmd_fixed_param, wmi_soc_set_antenna_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SOC_SET_ANTENNA_MODE_CMDID);
+
+/* Set the PDEV Antenna Mode Cmd */
+#define WMITLV_TABLE_WMI_PDEV_SET_ANTENNA_MODE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_antenna_mode_cmd_fixed_param, wmi_pdev_set_antenna_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_ANTENNA_MODE_CMDID);
+
+#define WMITLV_TABLE_WMI_LRO_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_lro_info_cmd_fixed_param, wmi_lro_info_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_LRO_CONFIG_CMDID);
+
+#define WMITLV_TABLE_WMI_TRANSFER_DATA_TO_FLASH_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_cmd_fixed_param, wmi_transfer_data_to_flash_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_TRANSFER_DATA_TO_FLASH_CMDID);
+
+#define WMITLV_TABLE_WMI_READ_DATA_FROM_FLASH_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_read_data_from_flash_cmd_fixed_param, wmi_read_data_from_flash_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_READ_DATA_FROM_FLASH_CMDID);
+
+#define WMITLV_TABLE_WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_config_enhanced_mcast_filter_fixed_param, wmi_config_enhanced_mcast_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_WISA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_wisa_cmd_fixed_param, wmi_vdev_wisa_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_WISA_CMDID);
+
+/* MAWC sensor report indication cmd */
+#define WMITLV_TABLE_WMI_MAWC_SENSOR_REPORT_IND_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mawc_sensor_report_ind_cmd_fixed_param, wmi_mawc_sensor_report_ind_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MAWC_SENSOR_REPORT_IND_CMDID);
+
+/* Roam configure MAWC cmd */
+#define WMITLV_TABLE_WMI_ROAM_CONFIGURE_MAWC_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_configure_mawc_cmd_fixed_param, wmi_roam_configure_mawc_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_CONFIGURE_MAWC_CMDID);
+
+/* NLO configure MAWC cmd */
+#define WMITLV_TABLE_WMI_NLO_CONFIGURE_MAWC_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nlo_configure_mawc_cmd_fixed_param, wmi_nlo_configure_mawc_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NLO_CONFIGURE_MAWC_CMDID);
+
+/* Extscan configure MAWC cmd */
+#define WMITLV_TABLE_WMI_EXTSCAN_CONFIGURE_MAWC_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_configure_mawc_cmd_fixed_param, wmi_extscan_configure_mawc_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_CONFIGURE_MAWC_CMDID);
+
+/* COEX config cmd */
+#define WMITLV_TABLE_WMI_COEX_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_COEX_CONFIG_CMD_fixed_param, WMI_COEX_CONFIG_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_COEX_CONFIG_CMDID);
+
+/* Coex get antenna isolation cmd */
+#define WMITLV_TABLE_WMI_COEX_GET_ANTENNA_ISOLATION_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_coex_get_antenna_isolation_cmd_fixed_param, wmi_coex_get_antenna_isolation_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_COEX_GET_ANTENNA_ISOLATION_CMDID);
+
+/* bpf offload capability get cmd */
+#define WMITLV_TABLE_WMI_BPF_GET_CAPABILITY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bpf_get_capability_cmd_fixed_param, wmi_bpf_get_capability_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_BPF_GET_CAPABILITY_CMDID);
+
+/* bpf offload get vdev status cmd */
+#define WMITLV_TABLE_WMI_BPF_GET_VDEV_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bpf_get_vdev_stats_cmd_fixed_param, wmi_bpf_get_vdev_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_BPF_GET_VDEV_STATS_CMDID);
+
+/* bpf offload set vdev instructions cmd */
+#define WMITLV_TABLE_WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bpf_set_vdev_instructions_cmd_fixed_param, wmi_bpf_set_vdev_instructions_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, buf_inst, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID);
+
+/* bpf offload delete vdev instructions cmd */
+#define WMITLV_TABLE_WMI_BPF_DEL_VDEV_INSTRUCTIONS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bpf_del_vdev_instructions_cmd_fixed_param, wmi_bpf_del_vdev_instructions_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_BPF_DEL_VDEV_INSTRUCTIONS_CMDID);
+
+/* Enable/Disable Smart Antenna */
+#define WMITLV_TABLE_WMI_PDEV_SMART_ANT_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_smart_ant_enable_cmd_fixed_param, wmi_pdev_smart_ant_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_smart_ant_gpio_handle, gpio_handle, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SMART_ANT_ENABLE_CMDID);
+
+/* Set Smart Antenna RX antenna */
+#define WMITLV_TABLE_WMI_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_smart_ant_set_rx_antenna_cmd_fixed_param, wmi_pdev_smart_ant_set_rx_antenna_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID);
+
+/* Override the antenna switch table */
+#define WMITLV_TABLE_WMI_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_ant_switch_tbl_cmd_fixed_param, wmi_pdev_set_ant_switch_tbl_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_set_ant_ctrl_chain, ant_ctrl_chain, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID);
+
+/* Override the CTL table */
+#define WMITLV_TABLE_WMI_PDEV_SET_CTL_TABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_ctl_table_cmd_fixed_param, wmi_pdev_set_ctl_table_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ctl_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_CTL_TABLE_CMDID);
+
+/* Override the array gain table */
+#define WMITLV_TABLE_WMI_PDEV_SET_MIMOGAIN_TABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_mimogain_table_cmd_fixed_param, wmi_pdev_set_mimogain_table_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, arraygain_tbl, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_MIMOGAIN_TABLE_CMDID);
+
+/* FIPS cmd */
+#define WMITLV_TABLE_WMI_PDEV_FIPS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_fips_cmd_fixed_param, wmi_pdev_fips_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_FIPS_CMDID);
+
+/* get CCK ANI level */
+#define WMITLV_TABLE_WMI_PDEV_GET_ANI_CCK_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_get_ani_cck_config_cmd_fixed_param, wmi_pdev_get_ani_cck_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_ANI_CCK_CONFIG_CMDID);
+
+/* get OFDM ANI level */
+#define WMITLV_TABLE_WMI_PDEV_GET_ANI_OFDM_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_get_ani_ofdm_config_cmd_fixed_param, wmi_pdev_get_ani_ofdm_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_ANI_OFDM_CONFIG_CMDID);
+
+/* TxPPDU TPC cmd */
+#define WMITLV_TABLE_WMI_PDEV_GET_TPC_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_get_tpc_cmd_fixed_param, wmi_pdev_get_tpc_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_TPC_CMDID);
+
+#define WMITLV_TABLE_WMI_VDEV_RATEMASK_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_config_ratemask_fixed_param, wmi_vdev_config_ratemask_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_RATEMASK_CMDID);
+
+/* ATF VDEV REQUEST commands */
+#define WMITLV_TABLE_WMI_VDEV_ATF_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_atf_request_fixed_param, wmi_vdev_atf_request_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_ATF_REQUEST_CMDID);
+
+/* Command to send the DSCP-to-TID map to the target for VAP */
+#define WMITLV_TABLE_WMI_VDEV_SET_DSCP_TID_MAP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_dscp_tid_map_cmd_fixed_param, wmi_vdev_set_dscp_tid_map_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_DSCP_TID_MAP_CMDID);
+
+/* Configure filter for Neighbor Rx Pkt (smart mesh selective listening) */
+#define WMITLV_TABLE_WMI_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_filter_nrp_config_cmd_fixed_param, wmi_vdev_filter_nrp_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID);
+
+/* update a wds (4 address) entry */
+#define WMITLV_TABLE_WMI_PEER_UPDATE_WDS_ENTRY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_update_wds_entry_cmd_fixed_param, wmi_peer_update_wds_entry_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_UPDATE_WDS_ENTRY_CMDID);
+
+/* add a proxy sta entry */
+#define WMITLV_TABLE_WMI_PEER_ADD_PROXY_STA_ENTRY_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_create_cmd_fixed_param, wmi_peer_create_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ADD_PROXY_STA_ENTRY_CMDID);
+
+/* Set Smart Antenna TX antenna */
+#define WMITLV_TABLE_WMI_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len,WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_tx_antenna_cmd_fixed_param, wmi_peer_smart_ant_set_tx_antenna_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_smart_ant_set_tx_antenna_series, antenna_series, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID);
+
+/* Set Smart Antenna TX train info */
+#define WMITLV_TABLE_WMI_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_train_antenna_cmd_fixed_param, wmi_peer_smart_ant_set_train_antenna_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_smart_ant_set_train_antenna_param, antenna_param, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID);
+
+/* Set SA node config options */
+#define WMITLV_TABLE_WMI_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_node_config_ops_cmd_fixed_param, wmi_peer_smart_ant_set_node_config_ops_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, args, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID);
+
+/* Q-Boost configuration test commands */
+#define WMITLV_TABLE_WMI_QBOOST_CFG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_QBOOST_CFG_CMD_fixed_param, WMI_QBOOST_CFG_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_QBOOST_CFG_CMDID);
+
+/* set debug and tuning parameters */
+#define WMITLV_TABLE_WMI_FWTEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_fwtest_set_param_cmd_fixed_param, wmi_fwtest_set_param_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_FWTEST_CMDID);
+
+/* ATF PEER REQUEST commands. */
+#define WMITLV_TABLE_WMI_PEER_ATF_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_atf_request_fixed_param, wmi_peer_atf_request_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_atf_peer_info, peer_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ATF_REQUEST_CMDID);
+
+/* enable/disable and set the periodicity of periodic channel stats */
+#define WMITLV_TABLE_WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_set_periodic_channel_stats_config_fixed_param, wmi_set_periodic_channel_stats_config_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID);
+
+/* wal power debug command per pdev */
+#define WMITLV_TABLE_WMI_PDEV_WAL_POWER_DEBUG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_wal_power_debug_cmd_fixed_param, wmi_pdev_wal_power_debug_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, args, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_WAL_POWER_DEBUG_CMDID);
+
+/* pdev set reorder timeout val */
+#define WMITLV_TABLE_WMI_PDEV_SET_REORDER_TIMEOUT_VAL_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_reorder_timeout_val_cmd_fixed_param, wmi_pdev_set_reorder_timeout_val_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_REORDER_TIMEOUT_VAL_CMDID);
+
+/* peer set rx blocksize cmd */
+#define WMITLV_TABLE_WMI_PEER_SET_RX_BLOCKSIZE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_set_rx_blocksize_cmd_fixed_param, wmi_peer_set_rx_blocksize_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_SET_RX_BLOCKSIZE_CMDID);
+
+/* Bandwidth Fairness (BWF) peer configure commands */
+#define WMITLV_TABLE_WMI_PEER_BWF_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_bwf_request_fixed_param, wmi_peer_bwf_request_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_bwf_peer_info, peer_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_BWF_REQUEST_CMDID);
+
+#define WMITLV_TABLE_WMI_RMC_SET_MANUAL_LEADER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_rmc_set_leader_cmd_fixed_param, wmi_rmc_set_leader_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_RMC_SET_MANUAL_LEADER_CMDID);
+
+/* peer reorder queue setup cmd */
+#define WMITLV_TABLE_WMI_PEER_REORDER_QUEUE_SETUP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_reorder_queue_setup_cmd_fixed_param, wmi_peer_reorder_queue_setup_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_REORDER_QUEUE_SETUP_CMDID);
+
+/* peer reorder queue remove cmd */
+#define WMITLV_TABLE_WMI_PEER_REORDER_QUEUE_REMOVE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_reorder_queue_remove_cmd_fixed_param, wmi_peer_reorder_queue_remove_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_REORDER_QUEUE_REMOVE_CMDID);
+
+/* Filter in monitor mode paramters Cmd */
+#define WMITLV_TABLE_WMI_MNT_FILTER_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mnt_filter_cmd_fixed_param, wmi_mnt_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MNT_FILTER_CMDID);
+
+/* WLAN GET Chip power Stats*/
+#define WMITLV_TABLE_WMI_PDEV_GET_CHIP_POWER_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_get_chip_power_stats_cmd_fixed_param, wmi_pdev_get_chip_power_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_CHIP_POWER_STATS_CMDID);
+
+/* pdev set stats threshold cmd*/
+#define WMITLV_TABLE_WMI_PDEV_SET_STATS_THRESHOLD_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_stats_threshold_cmd_fixed_param, wmi_pdev_set_stats_threshold_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_chan_cca_stats_thresh, wmi_chan_cca_stats_thresh, cca_thresh, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_signal_stats_thresh, wmi_peer_signal_stats_thresh, signal_thresh, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tx_stats_thresh, wmi_tx_stats_thresh, tx_thresh, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_rx_stats_thresh, wmi_rx_stats_thresh, rx_thresh, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_STATS_THRESHOLD_CMDID);  
+ 
+/* Request wlan stats cmd */
+#define WMITLV_TABLE_WMI_REQUEST_WLAN_STATS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_request_wlan_stats_cmd_fixed_param, wmi_request_wlan_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_REQUEST_WLAN_STATS_CMDID);
+
+
+/************************** TLV definitions of WMI events *******************************/
+
+/* Service Ready event */
+#define WMITLV_TABLE_WMI_SERVICE_READY_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_service_ready_event_fixed_param, wmi_service_ready_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)     \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_HAL_REG_CAPABILITIES, HAL_REG_CAPABILITIES, hal_reg_capabilities, WMITLV_SIZE_FIX) \
+    WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, wmi_service_bitmap, WMITLV_SIZE_FIX, WMI_SERVICE_BM_SIZE) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wlan_host_mem_req, mem_reqs, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, wlan_dbs_hw_mode_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SERVICE_READY_EVENTID);
+
+/* service available event */
+#define WMITLV_TABLE_WMI_SERVICE_AVAILABLE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_service_available_event_fixed_param, wmi_service_available_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SERVICE_AVAILABLE_EVENTID);
+
+/* Service Ready Extension event */
+#define WMITLV_TABLE_WMI_SERVICE_READY_EXT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_service_ready_ext_event_fixed_param, wmi_service_ready_ext_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_SOC_MAC_PHY_HW_MODE_CAPS, WMI_SOC_MAC_PHY_HW_MODE_CAPS, soc_hw_mode_caps, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_HW_MODE_CAPABILITIES, hw_mode_caps, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_MAC_PHY_CAPABILITIES, mac_phy_caps, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_SOC_HAL_REG_CAPABILITIES, WMI_SOC_HAL_REG_CAPABILITIES, soc_hal_reg_caps, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_HAL_REG_CAPABILITIES_EXT, hal_reg_caps, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SERVICE_READY_EXT_EVENTID);
+
+/* Ready event */
+#define WMITLV_TABLE_WMI_READY_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ready_event_fixed_param, wmi_ready_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_READY_EVENTID);
+
+/* Scan Event */
+#define WMITLV_TABLE_WMI_SCAN_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_scan_event_fixed_param, wmi_scan_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SCAN_EVENTID);
+
+/* ExtScan Start/Stop Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_START_STOP_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_start_stop_event_fixed_param, wmi_extscan_start_stop_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_START_STOP_EVENTID);
+
+/* ExtScan Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_OPERATION_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_operation_event_fixed_param, wmi_extscan_operation_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, bucket_id, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_OPERATION_EVENTID);
+
+/* ExtScan Table Usage Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_TABLE_USAGE_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_table_usage_event_fixed_param, wmi_extscan_table_usage_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_TABLE_USAGE_EVENTID);
+
+/* ExtScan Result Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_CACHED_RESULTS_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_cached_results_event_fixed_param, wmi_extscan_cached_results_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_wlan_descriptor, bssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_rssi_info, rssi_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_CACHED_RESULTS_EVENTID);
+
+/* ExtScan Monitor RSSI List Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_wlan_change_results_event_fixed_param, wmi_extscan_wlan_change_results_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_wlan_change_result_bssid, bssid_signal_descriptor_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, rssi_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID);
+
+/* ExtScan Hot List Match Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_HOTLIST_MATCH_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param, wmi_extscan_hotlist_match_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_wlan_descriptor, hotlist_match, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_HOTLIST_MATCH_EVENTID);
+
+/* ExtScan Hot List Match Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_CAPABILITIES_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_capabilities_event_fixed_param, wmi_extscan_capabilities_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_cache_capabilities, extscan_cache_capabilities, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_wlan_change_monitor_capabilities, wlan_change_capabilities, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_hotlist_monitor_capabilities, hotlist_capabilities, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_CAPABILITIES_EVENTID);
+
+/* ExtScan Hot List Match Event */
+#define WMITLV_TABLE_WMI_EXTSCAN_HOTLIST_SSID_MATCH_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_extscan_hotlist_ssid_match_event_fixed_param, wmi_extscan_hotlist_ssid_match_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_extscan_wlan_descriptor, hotlist_ssid_match, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_EXTSCAN_HOTLIST_SSID_MATCH_EVENTID);
+
+/* Update_whal_mib_stats Event */
+#define WMITLV_TABLE_WMI_UPDATE_WHAL_MIB_STATS_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_update_whal_mib_stats_event_fixed_param, wmi_update_whal_mib_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_UPDATE_WHAL_MIB_STATS_EVENTID);
+
+/* PDEV TPC Config Event */
+#define WMITLV_TABLE_WMI_PDEV_TPC_CONFIG_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_tpc_config_event_fixed_param, wmi_pdev_tpc_config_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ratesArray, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_TPC_CONFIG_EVENTID);
+
+/* Channel Info Event */
+#define WMITLV_TABLE_WMI_CHAN_INFO_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_chan_info_event_fixed_param, wmi_chan_info_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_CHAN_INFO_EVENTID);
+
+/* Phy Error Event */
+#define WMITLV_TABLE_WMI_PHYERR_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_comb_phyerr_rx_hdr, wmi_comb_phyerr_rx_hdr, hdr, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PHYERR_EVENTID);
+
+/* TX Pause/Unpause event */
+#define WMITLV_TABLE_WMI_TX_PAUSE_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tx_pause_event_fixed_param, wmi_tx_pause_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_TX_PAUSE_EVENTID);
+
+/* Mgmt TX completion event */
+#define WMITLV_TABLE_WMI_MGMT_TX_COMPLETION_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mgmt_tx_compl_event_fixed_param, wmi_mgmt_tx_compl_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MGMT_TX_COMPLETION_EVENTID);
+
+/* Bundled Mgmt TX completion event */
+#define WMITLV_TABLE_WMI_MGMT_TX_BUNDLE_COMPLETION_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mgmt_tx_compl_bundle_event_fixed_param, wmi_mgmt_tx_compl_bundle_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, desc_ids, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, status, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_MGMT_TX_BUNDLE_COMPLETION_EVENTID);
+
+/* VDEV Start response Event */
+#define WMITLV_TABLE_WMI_VDEV_START_RESP_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_start_response_event_fixed_param, wmi_vdev_start_response_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_START_RESP_EVENTID);
+
+/* VDEV Stopped Event */
+#define WMITLV_TABLE_WMI_VDEV_STOPPED_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_stopped_event_fixed_param, wmi_vdev_stopped_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_STOPPED_EVENTID);
+
+/* VDEV delete response Event */
+#define WMITLV_TABLE_WMI_VDEV_DELETE_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_delete_resp_event_fixed_param, wmi_vdev_delete_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_DELETE_RESP_EVENTID);
+
+/* VDEV Install Key Complete Event */
+#define WMITLV_TABLE_WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID(id,op,buf,len)                                           \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_install_key_complete_event_fixed_param, wmi_vdev_install_key_complete_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID);
+
+/* Peer STA Kickout Event */
+#define WMITLV_TABLE_WMI_PEER_STA_KICKOUT_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_sta_kickout_event_fixed_param, wmi_peer_sta_kickout_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_STA_KICKOUT_EVENTID);
+
+/* Management Rx Event */
+#define WMITLV_TABLE_WMI_MGMT_RX_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mgmt_rx_hdr, wmi_mgmt_rx_hdr, hdr, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_MGMT_RX_EVENTID);
+
+/* TBTT offset Event */
+#define WMITLV_TABLE_WMI_TBTTOFFSET_UPDATE_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tbtt_offset_event_fixed_param, wmi_tbtt_offset_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, tbttoffset_list, WMITLV_SIZE_FIX, WMI_MAX_AP_VDEV)
+WMITLV_CREATE_PARAM_STRUC(WMI_TBTTOFFSET_UPDATE_EVENTID);
+
+/* TX DELBA Complete Event */
+#define WMITLV_TABLE_WMI_TX_DELBA_COMPLETE_EVENTID(id,op,buf,len)                                           \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tx_delba_complete_event_fixed_param, wmi_tx_delba_complete_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_TX_DELBA_COMPLETE_EVENTID);
+
+/* Tx ADDBA Complete Event */
+#define WMITLV_TABLE_WMI_TX_ADDBA_COMPLETE_EVENTID(id,op,buf,len)                                       \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tx_addba_complete_event_fixed_param, wmi_tx_addba_complete_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_TX_ADDBA_COMPLETE_EVENTID);
+
+/* ADD BA Req ssn Event */
+#define WMITLV_TABLE_WMI_BA_RSP_SSN_EVENTID(id,op,buf,len)                                       \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ba_rsp_ssn_event_fixed_param, wmi_ba_rsp_ssn_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_ARRAY_STRUC, wmi_ba_event_ssn, ba_event_ssn_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_BA_RSP_SSN_EVENTID);
+
+/* Aggregation Request event */
+#define WMITLV_TABLE_WMI_AGGR_STATE_TRIG_EVENTID(id,op,buf,len)                                       \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_aggr_state_trig_event_fixed_param, wmi_aggr_state_trig_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_AGGR_STATE_TRIG_EVENTID);
+
+/* Roam Event */
+#define WMITLV_TABLE_WMI_ROAM_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_event_fixed_param, wmi_roam_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_EVENTID);
+
+/* Roam Synch Event */
+#define WMITLV_TABLE_WMI_ROAM_SYNCH_EVENTID(id,op,buf,len)                                                      \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_synch_event_fixed_param, wmi_roam_synch_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bcn_probe_rsp_frame, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, reassoc_rsp_frame, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_key_material, key, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, status, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, reassoc_req_frame, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_hw_mode_transition_event_fixed_param, hw_mode_transition_fixed_param, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_set_hw_mode_response_vdev_mac_entry, wmi_pdev_set_hw_mode_response_vdev_mac_mapping, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SYNCH_EVENTID);
+
+/* WOW Wakeup Host Event */
+/* NOTE: Make sure wow_bitmap_info can be zero or one elements only */
+#define WMITLV_TABLE_WMI_WOW_WAKEUP_HOST_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WOW_EVENT_INFO_fixed_param, WOW_EVENT_INFO_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WOW_EVENT_INFO_SECTION_BITMAP, wow_bitmap_info, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, wow_packet_buffer, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_hb_ind_event_fixed_param, hb_indevt, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param, wow_gtkigtk, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_WAKEUP_HOST_EVENTID);
+
+#define WMITLV_TABLE_WMI_WOW_INITIAL_WAKEUP_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WOW_EVENT_INITIAL_WAKEUP_fixed_param, WOW_INITIAL_WAKEUP_EVENT_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WOW_INITIAL_WAKEUP_EVENTID);
+
+/* RTT error report Event */
+#define WMITLV_TABLE_WMI_RTT_ERROR_REPORT_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_RTT_ERROR_REPORT_EVENTID);
+
+/* Echo Event */
+#define WMITLV_TABLE_WMI_ECHO_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_echo_event_fixed_param, wmi_echo_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_ECHO_EVENTID);
+
+/* FTM Integration Event */
+#define WMITLV_TABLE_WMI_PDEV_FTM_INTG_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ftm_intg_event_fixed_param, wmi_ftm_intg_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_FTM_INTG_EVENTID);
+
+/* VDEV get Keepalive Event */
+#define WMITLV_TABLE_WMI_VDEV_GET_KEEPALIVE_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_event_fixed_param, wmi_vdev_get_keepalive_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_GET_KEEPALIVE_EVENTID);
+
+/* GPIO Input Event */
+#define WMITLV_TABLE_WMI_GPIO_INPUT_EVENTID(id,op,buf,len)  \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_gpio_input_event_fixed_param, wmi_gpio_input_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_GPIO_INPUT_EVENTID);
+
+/* CSA Handling Event */
+#define WMITLV_TABLE_WMI_CSA_HANDLING_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_csa_event_fixed_param, wmi_csa_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_CSA_HANDLING_EVENTID);
+
+/* Rfkill state change Event */
+#define WMITLV_TABLE_WMI_RFKILL_STATE_CHANGE_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_rfkill_event_fixed_param, wmi_rfkill_mode_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_RFKILL_STATE_CHANGE_EVENTID);
+
+
+/* Debug Message Event */
+#define WMITLV_TABLE_WMI_DEBUG_MESG_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DEBUG_MESG_EVENTID);
+
+#define WMITLV_TABLE_WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_debug_mesg_flush_complete_fixed_param, wmi_debug_mesg_flush_complete_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID);
+
+#define WMITLV_TABLE_WMI_RSSI_BREACH_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_rssi_breach_event_fixed_param, wmi_rssi_breach_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_RSSI_BREACH_EVENTID);
+
+#define WMITLV_TABLE_WMI_TRANSFER_DATA_TO_FLASH_COMPLETE_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_complete_event_fixed_param, wmi_transfer_data_to_flash_complete_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_TRANSFER_DATA_TO_FLASH_COMPLETE_EVENTID);
+
+#define WMITLV_TABLE_WMI_READ_DATA_FROM_FLASH_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_read_data_from_flash_event_fixed_param, wmi_read_data_from_flash_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_READ_DATA_FROM_FLASH_EVENTID);
+
+/* Diagnostics Event */
+#define WMITLV_TABLE_WMI_DIAG_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DIAG_EVENTID);
+
+/* IGTK Offload Event */
+#define WMITLV_TABLE_WMI_GTK_OFFLOAD_STATUS_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param, WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_GTK_OFFLOAD_STATUS_EVENTID);
+
+/* DCA interferance Event */
+#define WMITLV_TABLE_WMI_DCS_INTERFERENCE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dcs_interference_event_fixed_param, wmi_dcs_interference_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wlan_dcs_cw_int, cw_int, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wlan_dcs_im_tgt_stats_t, wlan_stat, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DCS_INTERFERENCE_EVENTID);
+
+/* Profile data Event */
+#define WMITLV_TABLE_WMI_WLAN_PROFILE_DATA_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wlan_profile_ctx_t, wmi_wlan_profile_ctx_t, profile_ctx, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_wlan_profile_t, profile_data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_PROFILE_DATA_EVENTID);
+
+/* PDEV UTF Event */
+#define WMITLV_TABLE_WMI_PDEV_UTF_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_UTF_EVENTID);
+
+/* Update SCPC calibrated data Event */
+#define WMITLV_TABLE_WMI_PDEV_UTF_SCPC_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_scpc_event_fixed_param, wmi_scpc_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_UTF_SCPC_EVENTID);
+
+/* Debug print Event */
+#define WMITLV_TABLE_WMI_DEBUG_PRINT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DEBUG_PRINT_EVENTID);
+
+/* RTT measurement report Event - DEPRECATED */
+#define WMITLV_TABLE_WMI_RTT_MEASUREMENT_REPORT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_RTT_MEASUREMENT_REPORT_EVENTID);
+
+/*oem measurement report Event - DEPRECATED */
+#define WMITLV_TABLE_WMI_OEM_MEASUREMENT_REPORT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_OEM_MEASUREMENT_REPORT_EVENTID);
+
+/*oem error report event - DEPRECATED */
+#define WMITLV_TABLE_WMI_OEM_ERROR_REPORT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_OEM_ERROR_REPORT_EVENTID);
+
+/*oem capability report event - DEPRECATED */
+#define WMITLV_TABLE_WMI_OEM_CAPABILITY_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_OEM_CAPABILITY_EVENTID);
+
+/*oem response event*/
+#define WMITLV_TABLE_WMI_OEM_RESPONSE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_OEM_RESPONSE_EVENTID);
+
+/* HOST SWBA Event */
+#define WMITLV_TABLE_WMI_HOST_SWBA_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_host_swba_event_fixed_param, wmi_host_swba_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_tim_info, tim_info, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_p2p_noa_info, p2p_noa_info, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_HOST_SWBA_EVENTID);
+
+
+/* Update stats Event */
+#define WMITLV_TABLE_WMI_UPDATE_STATS_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_stats_event_fixed_param, wmi_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_per_chain_rssi_stats, wmi_per_chain_rssi_stats, chain_stats, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_rssi_stats, rssi_stats, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_UPDATE_STATS_EVENTID);
+
+/* For vdev based ht/vht info upload*/
+#define WMITLV_TABLE_WMI_UPDATE_VDEV_RATE_STATS_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_rate_stats_event_fixed_param, wmi_vdev_rate_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_rate_ht_info, ht_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_UPDATE_VDEV_RATE_STATS_EVENTID);
+
+/* Update memory dump complete Event */
+#define  WMITLV_TABLE_WMI_UPDATE_FW_MEM_DUMP_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_update_fw_mem_dump_fixed_param, wmi_update_fw_mem_dump_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_UPDATE_FW_MEM_DUMP_EVENTID);
+
+/* Event indicating the DIAG LOGs/Events supported by FW */
+#define WMITLV_TABLE_WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_diag_event_log_supported_event_fixed_params, wmi_diag_event_log_supported_event_fixed_params, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, diag_events_logs_list, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID);
+
+/* Update iface link stats Event */
+#define WMITLV_TABLE_WMI_IFACE_LINK_STATS_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_iface_link_stats_event_fixed_param, wmi_iface_link_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_iface_link_stats, iface_link_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_wmm_ac_stats, ac, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_IFACE_LINK_STATS_EVENTID);
+
+/* Update Peer link stats Event */
+#define WMITLV_TABLE_WMI_PEER_LINK_STATS_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_stats_event_fixed_param, wmi_peer_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_link_stats, peer_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_rate_stats, peer_rate_stats, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_LINK_STATS_EVENTID);
+
+/* Update radio stats Event */
+#define WMITLV_TABLE_WMI_RADIO_LINK_STATS_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_radio_link_stats_event_fixed_param, wmi_radio_link_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_radio_link_stats, radio_stats, WMITLV_SIZE_VAR)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel_stats, channel_stats, WMITLV_SIZE_VAR)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_RADIO_LINK_STATS_EVENTID);
+
+/* PDEV QVIT Event */
+#define WMITLV_TABLE_WMI_PDEV_QVIT_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_QVIT_EVENTID);
+
+/* WLAN Frequency avoid Event */
+#define WMITLV_TABLE_WMI_WLAN_FREQ_AVOID_EVENTID(id,op,buf,len)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_avoid_freq_ranges_event_fixed_param, wmi_avoid_freq_ranges_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_avoid_freq_range_desc, avd_freq_range, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_FREQ_AVOID_EVENTID);
+
+/* GTK rekey fail Event */
+#define WMITLV_TABLE_WMI_GTK_REKEY_FAIL_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_gtk_rekey_fail_event_fixed_param, wmi_gtk_rekey_fail_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_GTK_REKEY_FAIL_EVENTID);
+
+/* NLO match event */
+#define WMITLV_TABLE_WMI_NLO_MATCH_EVENTID(id,op,buf,len)                                                                                                 \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nlo_event, wmi_nlo_event, fixed_param, WMITLV_SIZE_FIX)
+    WMITLV_CREATE_PARAM_STRUC(WMI_NLO_MATCH_EVENTID);
+
+/* NLO scan complete event */
+#define WMITLV_TABLE_WMI_NLO_SCAN_COMPLETE_EVENTID(id,op,buf,len)                                                                                                 \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nlo_event, wmi_nlo_event, fixed_param, WMITLV_SIZE_FIX)
+    WMITLV_CREATE_PARAM_STRUC(WMI_NLO_SCAN_COMPLETE_EVENTID);
+
+/* APFIND event */
+#define WMITLV_TABLE_WMI_APFIND_EVENTID(id,op,buf,len)                                                                                                 \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_apfind_event_hdr, wmi_apfind_event_hdr, hdr, WMITLV_SIZE_FIX) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+    WMITLV_CREATE_PARAM_STRUC(WMI_APFIND_EVENTID);
+
+/* WMI_PASSPOINT_MATCH_EVENTID */
+#define WMITLV_TABLE_WMI_PASSPOINT_MATCH_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_passpoint_event_hdr, wmi_passpoint_event_hdr, fixed_param, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+    WMITLV_CREATE_PARAM_STRUC(WMI_PASSPOINT_MATCH_EVENTID);
+
+/* Chatter query reply event */
+#define WMITLV_TABLE_WMI_CHATTER_PC_QUERY_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_chatter_query_reply_event_fixed_param, wmi_chatter_query_reply_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+    WMITLV_CREATE_PARAM_STRUC(WMI_CHATTER_PC_QUERY_EVENTID);
+
+/* Upload H_CV info event */
+#define WMITLV_TABLE_WMI_UPLOADH_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_upload_h_hdr, wmi_upload_h_hdr, hdr, WMITLV_SIZE_FIX)   \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+    WMITLV_CREATE_PARAM_STRUC(WMI_UPLOADH_EVENTID);
+
+/* Capture H info event */
+#define WMITLV_TABLE_WMI_CAPTUREH_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_capture_h_event_hdr, wmi_capture_h_event_hdr, fixed_param, WMITLV_SIZE_FIX)
+    WMITLV_CREATE_PARAM_STRUC(WMI_CAPTUREH_EVENTID);
+
+/* TDLS Peer Update event */
+#define WMITLV_TABLE_WMI_TDLS_PEER_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tdls_peer_event_fixed_param, wmi_tdls_peer_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+    WMITLV_CREATE_PARAM_STRUC(WMI_TDLS_PEER_EVENTID);
+
+/* VDEV MCC Beacon Interval Change Request Event */
+#define WMITLV_TABLE_WMI_VDEV_MCC_BCN_INTERVAL_CHANGE_REQ_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_mcc_bcn_intvl_change_event_fixed_param, wmi_vdev_mcc_bcn_intvl_change_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_MCC_BCN_INTERVAL_CHANGE_REQ_EVENTID);
+
+#define WMITLV_TABLE_WMI_BATCH_SCAN_ENABLED_EVENTID(id,op,buf,len)                                                         \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_batch_scan_enabled_event_fixed_param, wmi_batch_scan_enabled_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_BATCH_SCAN_ENABLED_EVENTID);
+
+#define WMITLV_TABLE_WMI_BATCH_SCAN_RESULT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_batch_scan_result_event_fixed_param, wmi_batch_scan_result_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len,WMITLV_TAG_ARRAY_STRUC, wmi_batch_scan_result_scan_list, scan_list, WMITLV_SIZE_VAR)    \
+    WMITLV_ELEM(id,op,buf,len,WMITLV_TAG_ARRAY_STRUC, wmi_batch_scan_result_network_info, network_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_BATCH_SCAN_RESULT_EVENTID);
+
+#define WMITLV_TABLE_WMI_OFFLOAD_BCN_TX_STATUS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_offload_bcn_tx_status_event_fixed_param, wmi_offload_bcn_tx_status_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OFFLOAD_BCN_TX_STATUS_EVENTID);
+
+/* NOA Event */
+#define WMITLV_TABLE_WMI_P2P_NOA_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_noa_event_fixed_param, wmi_p2p_noa_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_p2p_noa_info, wmi_p2p_noa_info, p2p_noa_info, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_P2P_NOA_EVENTID);
+
+/* AP PS enhanced green ap Event */
+#define WMITLV_TABLE_WMI_AP_PS_EGAP_INFO_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ap_ps_egap_info_event_fixed_param, wmi_ap_ps_egap_info_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ap_ps_egap_info_chainmask_list, chainmask_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_AP_PS_EGAP_INFO_EVENTID);
+
+#define WMITLV_TABLE_WMI_PEER_INFO_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_info_event_fixed_param, wmi_peer_info_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)               \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_info, peer_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_INFO_EVENTID);
+
+#define WMITLV_TABLE_WMI_PEER_ANTDIV_INFO_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_antdiv_info_event_fixed_param, wmi_peer_antdiv_info_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_antdiv_info, peer_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ANTDIV_INFO_EVENTID);
+
+#define WMITLV_TABLE_WMI_PEER_TX_FAIL_CNT_THR_EVENTID(id,op,buf,len)                                                                                                 \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_tx_fail_cnt_thr_event_fixed_param, wmi_peer_tx_fail_cnt_thr_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_TX_FAIL_CNT_THR_EVENTID);
+
+/* DFS radar Event */
+#define WMITLV_TABLE_WMI_DFS_RADAR_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dfs_radar_event_fixed_param, wmi_dfs_radar_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_DFS_RADAR_EVENTID);
+
+/* Thermal Event */
+#define WMITLV_TABLE_WMI_THERMAL_MGMT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_thermal_mgmt_event_fixed_param, wmi_thermal_mgmt_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_THERMAL_MGMT_EVENTID);
+
+/* NAN Response/Indication Event */
+#define WMITLV_TABLE_WMI_NAN_EVENTID(id,op,buf,len)                                     \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nan_event_hdr, wmi_nan_event_hdr, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NAN_EVENTID);
+
+/* NAN discovery interface created event */
+#define WMITLV_TABLE_WMI_NAN_DISC_IFACE_CREATED_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nan_disc_iface_created_event_fixed_param, wmi_nan_disc_iface_created_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NAN_DISC_IFACE_CREATED_EVENTID);
+
+/* NAN discovery interface deleted event */
+#define WMITLV_TABLE_WMI_NAN_DISC_IFACE_DELETED_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nan_disc_iface_deleted_event_fixed_param, wmi_nan_disc_iface_deleted_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NAN_DISC_IFACE_DELETED_EVENTID);
+
+/* NAN device started new cluster event */
+#define WMITLV_TABLE_WMI_NAN_STARTED_CLUSTER_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nan_started_cluster_event_fixed_param, wmi_nan_started_cluster_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NAN_STARTED_CLUSTER_EVENTID);
+
+/* NAN device joined to cluster event */
+#define WMITLV_TABLE_WMI_NAN_JOINED_CLUSTER_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_nan_joined_cluster_event_fixed_param, wmi_nan_joined_cluster_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NAN_JOINED_CLUSTER_EVENTID);
+
+/* Coex report antenna isolation event */
+#define WMITLV_TABLE_WMI_COEX_REPORT_ANTENNA_ISOLATION_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_coex_report_isolation_event_fixed_param, wmi_coex_report_isolation_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_COEX_REPORT_ANTENNA_ISOLATION_EVENTID);
+
+/* NDP capabilities response event */
+#define WMITLV_TABLE_WMI_NDI_CAP_RSP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndi_cap_rsp_event_fixed_param, wmi_ndi_cap_rsp_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDI_CAP_RSP_EVENTID);
+
+/* NDP initiator response event */
+#define WMITLV_TABLE_WMI_NDP_INITIATOR_RSP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_initiator_rsp_event_fixed_param, wmi_ndp_initiator_rsp_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_INITIATOR_RSP_EVENTID);
+
+/* NDP responder response event */
+#define WMITLV_TABLE_WMI_NDP_RESPONDER_RSP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_responder_rsp_event_fixed_param, wmi_ndp_responder_rsp_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_RESPONDER_RSP_EVENTID);
+
+/** NDP end response event
+ *
+ * TLV (tag length value ) parameters follow the ndp_end_rsp
+ * structure. The TLV's are:
+ * wmi_ndp_end_rsp_per_ndi ndp_end_rsp_per_ndi_list[];
+ * wmi_active_ndp_instance_id active_ndp_instances_id[];
+ */
+#define WMITLV_TABLE_WMI_NDP_END_RSP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_end_rsp_event_fixed_param, wmi_ndp_end_rsp_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ndp_end_rsp_per_ndi_PROTOTYPE, ndp_end_rsp_per_ndi_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_active_ndp_instance_id_PROTOTYPE, active_ndp_instances_id, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_END_RSP_EVENTID);
+
+/** NDP indication event
+ *
+ * TLV (tag length value ) parameters follow the ndp_indication
+ * structure. The TLV's are:
+ * A_UINT8 ndp_cfg[];
+ * A_UINT8 ndp_app_info[];
+ */
+#define WMITLV_TABLE_WMI_NDP_INDICATION_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_indication_event_fixed_param, wmi_ndp_indication_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_cfg, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_app_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_INDICATION_EVENTID);
+
+/** NDP confirm event
+ * TLV (tag length value ) parameters follow the ndp_confirm
+ * structure. The TLV's are:
+ * A_UINT8 ndp_cfg[];
+ * A_UINT8 ndp_app_info[];
+ */
+#define WMITLV_TABLE_WMI_NDP_CONFIRM_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ndp_confirm_event_fixed_param, wmi_ndp_confirm_event_fixed_param_PROTOTYPE, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_cfg, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ndp_app_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_CONFIRM_EVENTID);
+
+/** NDP end indication event
+ *
+ * TLV (tag length value ) parameters follow the ndp_end_indication
+ * structure. The TLV's are:
+ * wmi_ndp_end_indication ndp_end_indication_list[];
+ */
+#define WMITLV_TABLE_WMI_NDP_END_INDICATION_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ndp_end_indication_PROTOTYPE, ndp_end_indication_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_NDP_END_INDICATION_EVENTID);
+
+/* L1SS track Event */
+#define WMITLV_TABLE_WMI_PDEV_L1SS_TRACK_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_l1ss_track_event_fixed_param, wmi_pdev_l1ss_track_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_L1SS_TRACK_EVENTID);
+
+#define WMITLV_TABLE_WMI_DIAG_DATA_CONTAINER_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_diag_data_container_event_fixed_param, wmi_diag_data_container_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DIAG_DATA_CONTAINER_EVENTID);
+
+/* Estimated Link Speed Indication*/
+#define WMITLV_TABLE_WMI_PEER_ESTIMATED_LINKSPEED_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_estimated_linkspeed_event_fixed_param, wmi_peer_estimated_linkspeed_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ESTIMATED_LINKSPEED_EVENTID);
+
+/* NAN Response/Indication Event */
+#define WMITLV_TABLE_WMI_STATS_EXT_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_stats_ext_event_fixed_param, wmi_stats_ext_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_STATS_EXT_EVENTID);
+
+#define WMITLV_TABLE_WMI_OFFLOAD_PROB_RESP_TX_STATUS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_offload_prb_rsp_tx_status_event_fixed_param, wmi_offload_prb_rsp_tx_status_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OFFLOAD_PROB_RESP_TX_STATUS_EVENTID);
+
+/* host auto shut down event */
+#define WMITLV_TABLE_WMI_HOST_AUTO_SHUTDOWN_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_host_auto_shutdown_event_fixed_param, wmi_host_auto_shutdown_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_HOST_AUTO_SHUTDOWN_EVENTID);
+
+/* peer state Event */
+#define WMITLV_TABLE_WMI_PEER_STATE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_state_event_fixed_param, wmi_peer_state_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_STATE_EVENTID);
+
+/* peer delete response Event */
+#define WMITLV_TABLE_WMI_PEER_DELETE_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_delete_resp_event_fixed_param, wmi_peer_delete_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_DELETE_RESP_EVENTID);
+
+/* peer assoc conf Event */
+#define WMITLV_TABLE_WMI_PEER_ASSOC_CONF_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_assoc_conf_event_fixed_param, wmi_peer_assoc_conf_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_ASSOC_CONF_EVENTID);
+
+/* D0-WOW Disable Ack event */
+#define WMITLV_TABLE_WMI_D0_WOW_DISABLE_ACK_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_d0_wow_disable_ack_event_fixed_param, wmi_d0_wow_disable_ack_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_D0_WOW_DISABLE_ACK_EVENTID);
+
+/* Pdev get chip temperature event */
+#define WMITLV_TABLE_WMI_PDEV_TEMPERATURE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_temperature_event_fixed_param, wmi_pdev_temperature_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_TEMPERATURE_EVENTID);
+
+/* Pdev get ANT DIV feature status event */
+#define WMITLV_TABLE_WMI_PDEV_ANTDIV_STATUS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_antdiv_status_event_fixed_param, wmi_pdev_antdiv_status_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_ANTDIV_STATUS_EVENTID);
+
+/* mDNS offload stats event */
+#define WMITLV_TABLE_WMI_MDNS_STATS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mdns_stats_event_fixed_param, wmi_mdns_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MDNS_STATS_EVENTID);
+
+/* pdev resume event */
+#define WMITLV_TABLE_WMI_PDEV_RESUME_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_resume_event_fixed_param, wmi_pdev_resume_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_RESUME_EVENTID);
+
+/* SAP Authentication offload event */
+#define WMITLV_TABLE_WMI_SAP_OFL_ADD_STA_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sap_ofl_add_sta_event_fixed_param, wmi_sap_ofl_add_sta_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SAP_OFL_ADD_STA_EVENTID);
+
+#define WMITLV_TABLE_WMI_SAP_OFL_DEL_STA_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sap_ofl_del_sta_event_fixed_param, wmi_sap_ofl_del_sta_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SAP_OFL_DEL_STA_EVENTID);
+
+/* Set OCB schedule event, DEPRECATED */
+#define WMITLV_TABLE_WMI_OCB_SET_SCHED_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_ocb_set_sched_event_fixed_param, wmi_ocb_set_sched_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_SET_SCHED_EVENTID);
+
+/* Set OCB configuration response event */
+#define WMITLV_TABLE_WMI_OCB_SET_CONFIG_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ocb_set_config_resp_event_fixed_param, wmi_ocb_set_config_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_SET_CONFIG_RESP_EVENTID);
+
+/* Get TSF timer response event */
+#define WMITLV_TABLE_WMI_OCB_GET_TSF_TIMER_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_resp_event_fixed_param, wmi_ocb_get_tsf_timer_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_OCB_GET_TSF_TIMER_RESP_EVENTID);
+
+/* Get DCC stats response event */
+#define WMITLV_TABLE_WMI_DCC_GET_STATS_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dcc_get_stats_resp_event_fixed_param, wmi_dcc_get_stats_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dcc_ndl_stats_per_channel, stats_per_channel_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DCC_GET_STATS_RESP_EVENTID);
+
+/* Update DCC NDL response event */
+#define WMITLV_TABLE_WMI_DCC_UPDATE_NDL_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dcc_update_ndl_resp_event_fixed_param, wmi_dcc_update_ndl_resp_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_DCC_UPDATE_NDL_RESP_EVENTID);
+
+/* DCC stats event */
+#define WMITLV_TABLE_WMI_DCC_STATS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_dcc_stats_event_fixed_param, wmi_dcc_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dcc_ndl_stats_per_channel, stats_per_channel_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_DCC_STATS_EVENTID);
+
+/* Read TSF timer response event */
+#define WMITLV_TABLE_WMI_VDEV_TSF_REPORT_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_tsf_report_event_fixed_param, wmi_vdev_tsf_report_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_TSF_REPORT_EVENTID);
+
+/* Vdev capabilities IE to be transmitted in mgmt frames */
+#define WMITLV_TABLE_WMI_VDEV_SET_IE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_ie_cmd_fixed_param, wmi_vdev_set_ie_cmd_fixed_param, vdev_ie, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bufp, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_IE_CMDID);
+
+/* SOC Set Hardware Mode Response event - DEPRECATED */
+#define WMITLV_TABLE_WMI_SOC_SET_HW_MODE_RESP_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_response_event_fixed_param, wmi_soc_set_hw_mode_response_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_soc_set_hw_mode_response_vdev_mac_entry, wmi_soc_set_hw_mode_response_vdev_mac_mapping, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SOC_SET_HW_MODE_RESP_EVENTID);
+
+/* PDEV Set Hardware Mode Response event */
+#define WMITLV_TABLE_WMI_PDEV_SET_HW_MODE_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_response_event_fixed_param, wmi_pdev_set_hw_mode_response_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_set_hw_mode_response_vdev_mac_entry, wmi_pdev_set_hw_mode_response_vdev_mac_mapping, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_HW_MODE_RESP_EVENTID);
+
+/* SOC Hardware Mode Transition event - DEPRECATED */
+#define WMITLV_TABLE_WMI_SOC_HW_MODE_TRANSITION_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_soc_hw_mode_transition_event_fixed_param, wmi_soc_hw_mode_transition_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_soc_set_hw_mode_response_vdev_mac_entry, wmi_soc_set_hw_mode_response_vdev_mac_mapping, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_SOC_HW_MODE_TRANSITION_EVENTID);
+
+/* PDEV Hardware Mode Transition event */
+#define WMITLV_TABLE_WMI_PDEV_HW_MODE_TRANSITION_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_hw_mode_transition_event_fixed_param, wmi_pdev_hw_mode_transition_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_set_hw_mode_response_vdev_mac_entry, wmi_pdev_set_hw_mode_response_vdev_mac_mapping, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_HW_MODE_TRANSITION_EVENTID);
+
+/* SOC Set Dual MAC Config Response event - DEPRECATED */
+#define WMITLV_TABLE_WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_response_event_fixed_param, wmi_soc_set_dual_mac_config_response_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID);
+
+/* PDEV Set Dual MAC Config Response event */
+#define WMITLV_TABLE_WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_response_event_fixed_param, wmi_pdev_set_mac_config_response_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID);
+
+/* Packet Filter configure command*/
+#define WMITLV_TABLE_WMI_PACKET_FILTER_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_packet_filter_config_fixed_param, WMI_PACKET_FILTER_CONFIG_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PACKET_FILTER_CONFIG_CMDID);
+
+/* Packet Filter enable command*/
+#define WMITLV_TABLE_WMI_PACKET_FILTER_ENABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_packet_filter_enable_fixed_param, WMI_PACKET_FILTER_ENABLE_CMD_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PACKET_FILTER_ENABLE_CMDID);
+
+/* MAWC enable/disable sensor event */
+#define WMITLV_TABLE_WMI_MAWC_ENABLE_SENSOR_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mawc_enable_sensor_event_fixed_param, wmi_mawc_enable_sensor_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MAWC_ENABLE_SENSOR_EVENTID);
+
+/* SMPS force mode complete Event */
+#define WMITLV_TABLE_WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_complete_event_fixed_param, wmi_sta_smps_force_mode_complete_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID);
+
+/* bpf offload capability info event */
+#define WMITLV_TABLE_WMI_BPF_CAPABILIY_INFO_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bpf_capability_info_evt_fixed_param,  wmi_bpf_capability_info_evt_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_BPF_CAPABILIY_INFO_EVENTID);
+
+/* bpf offload vdev status info event */
+#define WMITLV_TABLE_WMI_BPF_VDEV_STATS_INFO_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_bpf_vdev_stats_info_evt_fixed_param, wmi_bpf_vdev_stats_info_evt_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_BPF_VDEV_STATS_INFO_EVENTID);
+
+/* FIPS event */
+#define WMITLV_TABLE_WMI_PDEV_FIPS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_fips_event_fixed_param, wmi_pdev_fips_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)   \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, data, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_FIPS_EVENTID);
+
+#define WMITLV_TABLE_WMI_PDEV_CHANNEL_HOPPING_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_channel_hopping_event_fixed_param, wmi_pdev_channel_hopping_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_CHANNEL_HOPPING_EVENTID);
+
+#define WMITLV_TABLE_WMI_PDEV_ANI_CCK_LEVEL_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ani_cck_event_fixed_param, wmi_ani_cck_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_ANI_CCK_LEVEL_EVENTID);
+
+#define WMITLV_TABLE_WMI_PDEV_CHIP_POWER_STATS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_chip_power_stats_event_fixed_param, wmi_pdev_chip_power_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, debug_registers, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_CHIP_POWER_STATS_EVENTID);
+
+#define WMITLV_TABLE_WMI_PDEV_ANI_OFDM_LEVEL_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_ani_ofdm_event_fixed_param, wmi_ani_ofdm_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_ANI_OFDM_LEVEL_EVENTID);
+
+#define WMITLV_TABLE_WMI_PDEV_TPC_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_tpc_event_fixed_param, wmi_pdev_tpc_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)\
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, tpc, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_TPC_EVENTID);
+
+#define WMITLV_TABLE_WMI_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_event_fixed_param, wmi_pdev_nfcal_power_all_channels_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_nfcal_power_all_channels_nfdBr, nfdbr, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_nfcal_power_all_channels_nfdBm, nfdbm, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_pdev_nfcal_power_all_channels_freqNum, freqnum, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID);
+
+#define WMITLV_TABLE_WMI_PEER_RATECODE_LIST_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_ratecode_list_event_fixed_param, wmi_peer_ratecode_list_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_cck_ofdm_rate_info, ratecode_legacy, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_mcs_rate_info, ratecode_mcs, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_RATECODE_LIST_EVENTID);
+
+#define WMITLV_TABLE_WMI_WDS_PEER_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wds_addr_event_fixed_param, wmi_wds_addr_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_WDS_PEER_EVENTID);
+
+#define WMITLV_TABLE_WMI_PEER_STA_PS_STATECHG_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_sta_ps_statechange_event_fixed_param, wmi_peer_sta_ps_statechange_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_STA_PS_STATECHG_EVENTID);
+
+#define WMITLV_TABLE_WMI_INST_RSSI_STATS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_inst_rssi_stats_resp_fixed_param, wmi_inst_rssi_stats_resp_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_INST_RSSI_STATS_EVENTID);
+
+#define WMITLV_TABLE_WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_tx_power_level_stats_evt_fixed_param, wmi_tx_power_level_stats_evt_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, tx_time_per_power_level, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID);
+
+#define WMITLV_TABLE_WMI_RMC_NEW_LEADER_EVENTID(id, op, buf, len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_rmc_manual_leader_event_fixed_param, wmi_rmc_manual_leader_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_RMC_NEW_LEADER_EVENTID);
+
+/* Layout of WMI_REPORT_STATS_EVENTID message:
+ *    fixed_param;
+ *    wmi_chan_cca_stats       chan_cca_stats[];         Array size is specified by num_chan_cca_stats
+ *    wmi_peer_signal_stats    peer_signal_stats[];      Array size is specified by num_peer_signal_stats
+ *    wmi_peer_ac_tx_stats     peer_ac_tx_stats[];       Array size is specified by num_peer_ac_tx_stats
+ *    wmi_tx_stats             tx_stats[][];             Array size is num_peer_ac_tx_stats * WLAN_MAX_AC, array index is (peer_index * WLAN_MAX_AC + ac_index)
+ *    A_UINT32                 tx_mpdu_aggr[][][];       Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_mpdu_aggr_array_size,
+ *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_mpdu_aggr_array_size + A-MPDU size index
+ *                                                       Contains a histogram of how many A-MPDUs of a given size (i.e. number of MPDUs) have been transmitted.
+ *                                                       Element 0 contains the number of MPDUs within a single-MPDU A-MPDU.
+ *                                                       Element 1 contains the number of MPDUs within a 2-MPDU A-MPDU (number of A-MPDUs x2).
+ *                                                       Element 2 contains the number of MPDUs within a 3-MPDU A-MPDU (number of A-MPDUs x3).
+ *                                                       Element tx_mpdu_aggr_array_size-1 contains the number of MPDUs within A-MPDUs with >= tx_mpdu_aggr_array_size MPDUs.
+ *    A_UINT32                 tx_msdu_acked_mcs[][][];  Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_msdu_acked_mcs_array_size,
+ *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_msdu_acked_mcs_array_size + MCS index
+ *                                                       Contains a count of how many tx MSDUs have been acked for each MCS of each AC of each peer.
+ *    A_UINT32                 tx_msdu_failed_mcs[][][]; Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_msdu_failed_mcs_array_size,
+ *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_msdu_failed_mcs_array_size + MCS index
+ *                                                       Contains a count of how many MSDUs failed tx due to no ack for each MCS of each AC of each peer.
+ *    A_UINT32                 tx_msdu_delay[][][];      Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_msdu_delay_array_size,
+ *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_msdu_delay_array_size + delay index
+ *                                                       Contains a histogram of how many MSDUs encountered each level of delay due to retries or air interface contention.
+ *                                                       The time represented by each array element (i.e. histogram bin) is specified by tx_delay_bin_size_ms.
+ *                                                       Element 0 contains the count of MSDUs delayed by less than tx_delay_bin_size_ms.
+ *                                                       Element 1 contains the count of MSDUs delayed by more than 1x tx_delay_bin_size_ms but less than 2x.
+ *                                                       Element tx_msdu_delay_array_size-1 contains the count of MSDUs delayed by
+ *                                                           >= tx_delay_bin_size_ms * (tx_msdu_delay_array_size-1)
+ *    wmi_peer_ac_rx_stats     peer_ac_rx_stats[];       Array size is specified by num_peer_ac_rx_stats
+ *    wmi_rx_stats             rx_stats[][];             Array size is num_peer_ac_rx_stats * WLAN_MAX_AC, array index is (peer_index * WLAN_MAX_AC + ac_index)
+ *    A_UINT32                 rx_mpdu_aggr[][][];       Array size is num_peer_ac_rx_stats * WLAN_MAX_AC * rx_mpdu_aggr_array_size,
+ *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * rx_mpdu_aggr_array_size + A-MPDU size index
+ *                                                       Contains a histogram of how many A-MPDUs of a given size (i.e. number of MPDUs) have been received.
+ *                                                       Element 0 contains the number of MPDUs within a single-MPDU A-MPDU.
+ *                                                       Element 1 contains the number of MPDUs within a 2-MPDU A-MPDU (number of A-MPDUs x2).
+ *                                                       Element 2 contains the number of MPDUs within a 3-MPDU A-MPDU (number of A-MPDUs x3).
+ *                                                       Element rx_mpdu_aggr_array_size-1 contains the number of MPDUs within A-MPDUs with >= rx_mpdu_aggr_array_size MPDUs.
+ *    A_UINT32                 rx_msdu_mcs[][][];        Array size is (num_peer_ac_rx_stats * WLAN_MAX_AC) * rx_msdu_mcs_array_size,
+ *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * rx_msdu_mcs_array_size + MCS index
+ *                                                       Contains a count of rx MSDUs for each MCS of each AC of each peer.
+ * For example, if there were 2 peers (X and Y) whose stats were being reported,
+ * the message and its TLV arrays would look like this:
+ * 1.  fixed_param
+ * 2.  chan_cca_stats[0]
+ * 3.  peer_signal_stats[0] for peer X
+ * 4.  peer_signal_stats[1] for peer Y
+ * 5.  peer_ac_tx_stats[0] for X
+ * 6.  peer_ac_tx_stats[1] for Y
+ * 7.  tx_stats[0][0] for peer X, AC 0
+ * 8.  tx_stats[0][1] for peer X, AC 1
+ * 9.  tx_stats[0][2] for peer X, AC 2
+ * 10. tx_stats[0][3] for peer X, AC 3
+ * 11. tx_stats[1][0] for peer Y, AC 0
+ * 12  tx_stats[1][1] for peer Y, AC 1
+ * 13. tx_stats[1][2] for peer Y, AC 2
+ * 14. tx_stats[1][3] for peer Y, AC 3
+ * 15. tx_mpdu_aggr[0][0][] for peer X, AC 0
+ * 16. tx_mpdu_aggr[0][1][] for peer X, AC 1
+ * 17. tx_mpdu_aggr[0][2][] for peer X, AC 2
+ * 18. tx_mpdu_aggr[0][3][] for peer X, AC 3
+ * 19. tx_mpdu_aggr[1][0][] for peer Y, AC 0
+ * 20. tx_mpdu_aggr[1][1][] for peer Y, AC 1
+ * 21. tx_mpdu_aggr[1][2][] for peer Y, AC 2
+ * 22. tx_mpdu_aggr[1][3][] for peer Y, AC 3
+ * 23. tx_msdu_acked_mcs[0][0][] for peer X, AC 0
+ * 24. tx_msdu_acked_mcs[0][1][] for peer X, AC 1
+ * 25. tx_msdu_acked_mcs[0][2][] for peer X, AC 2
+ * 26. tx_msdu_acked_mcs[0][3][] for peer X, AC 3
+ * 27. tx_msdu_acked_mcs[1][0][] for peer Y, AC 0
+ * 28. tx_msdu_acked_mcs[1][1][] for peer Y, AC 1
+ * 29. tx_msdu_acked_mcs[1][2][] for peer Y, AC 2
+ * 30. tx_msdu_acked_mcs[1][3][] for peer Y, AC 3
+ * 31. tx_msdu_failed_mcs[0][0][] for peer X, AC 0
+ * 32. tx_msdu_failed_mcs[0][1][] for peer X, AC 1
+ * 33. tx_msdu_failed_mcs[0][2][] for peer X, AC 2
+ * 34. tx_msdu_failed_mcs[0][3][] for peer X, AC 3
+ * 35. tx_msdu_failed_mcs[1][0][] for peer Y, AC 0
+ * 36. tx_msdu_failed_mcs[1][1][] for peer Y, AC 1
+ * 37. tx_msdu_failed_mcs[1][2][] for peer Y, AC 2
+ * 38. tx_msdu_failed_mcs[1][3][] for peer Y, AC 3
+ * 39. tx_msdu_delay[0][0][] for peer X, AC 0
+ * 40. tx_msdu_delay[0][1][] for peer X, AC 1
+ * 41. tx_msdu_delay[0][2][] for peer X, AC 2
+ * 42. tx_msdu_delay[0][3][] for peer X, AC 3
+ * 43. tx_msdu_delay[1][0][] for peer Y, AC 0
+ * 44. tx_msdu_delay[1][1][] for peer Y, AC 1
+ * 45. tx_msdu_delay[1][2][] for peer Y, AC 2
+ * 46. tx_msdu_delay[1][3][] for peer Y, AC 3
+ * 47. peer_ac_rx_stats[0] for X
+ * 48. peer_ac_rx_stats[1] for Y
+ * 49. rx_stats[0][0] for peer X, AC 0
+ * 50. rx_stats[0][1] for peer X, AC 1
+ * 51. rx_stats[0][2] for peer X, AC 2
+ * 52. rx_stats[0][3] for peer X, AC 3
+ * 53. rx_stats[1][0] for peer Y, AC 0
+ * 54. rx_stats[1][1] for peer Y, AC 1
+ * 55. rx_stats[1][2] for peer Y, AC 2
+ * 56. rx_stats[1][3] for peer Y, AC 3
+ * 57. rx_mpdu_aggr[0][0][] for peer X, AC 0
+ * 58. rx_mpdu_aggr[0][1][] for peer X, AC 1
+ * 59. rx_mpdu_aggr[0][2][] for peer X, AC 2
+ * 60. rx_mpdu_aggr[0][3][] for peer X, AC 3
+ * 61. rx_mpdu_aggr[1][0][] for peer Y, AC 0
+ * 62. rx_mpdu_aggr[1][1][] for peer Y, AC 1
+ * 63. rx_mpdu_aggr[1][2][] for peer Y, AC 2
+ * 64. rx_mpdu_aggr[1][3][] for peer Y, AC 3
+ * 65. rx_msdu_mcs[0][0][] for peer X, AC 0
+ * 66. rx_msdu_mcs[0][1][] for peer X, AC 1
+ * 67. rx_msdu_mcs[0][2][] for peer X, AC 2
+ * 68. rx_msdu_mcs[0][3][] for peer X, AC 3
+ * 69. rx_msdu_mcs[1][0][] for peer Y, AC 0
+ * 70. rx_msdu_mcs[1][1][] for peer Y, AC 1
+ * 71. rx_msdu_mcs[1][2][] for peer Y, AC 2
+ * 72. rx_msdu_mcs[1][3][] for peer Y, AC 3
+ **/
+#define WMITLV_TABLE_WMI_REPORT_STATS_EVENTID(id, op, buf, len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_report_stats_event_fixed_param, wmi_report_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_chan_cca_stats, chan_cca_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_signal_stats, peer_signal_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_ac_tx_stats, peer_ac_tx_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_tx_stats, tx_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, tx_mpdu_aggr, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, tx_msdu_acked_mcs, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, tx_msdu_failed_mcs, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, tx_msdu_delay, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_ac_rx_stats, peer_ac_rx_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_rx_stats, rx_stats, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, rx_mpdu_aggr, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, rx_msdu_mcs, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_REPORT_STATS_EVENTID);  
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*_WMI_TLV_DEFS_H_*/
+

fw/wmi_tlv_helper.h

@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2013-2014 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+#ifndef _WMI_TLV_HELPER_H_
+#define _WMI_TLV_HELPER_H_
+
+/*
+ * Every command or event parameter structure will need a TLV definition.
+ * The macro WMITLV_TABLE is used to help build this TLV definition. Inside this macro define, the
+ * individual TLV's are specified. The parameters for WMITLV_ELEM are:
+ * (1) the list of parameters that are passed unchanged from the WMITLV_TABLE. Currently, they are id,op,buf,len
+ * (2) The TLV Tag. You should create a new tag for each cmd/event in WMITLV_TAG_ID. The name of the
+ *     tag is <WMI_TLVTAG_STRUC_><CMD or Event ID name>. There are special tags,
+ *     e.g. WMI_TLVTAG_ARRAY_UINT32 and WMI_TLVTAG_ARRAY_STRUC. WMI_TLVTAG_ARRAY_UINT32 is for a
+ *     variable size array of UINT32 elements. WMI_TLVTAG_ARRAY_STRUC is for a varialbe size array
+ *     of structures.
+ * (3) type of the TLV. For WMI_TLVTAG_ARRAY_* tag, then it is the type of each element.
+ * (4) Name of this TLV. It must be unique in this TLV TABLE.
+ * (5) Either WMITLV_SIZE_FIX or WMITLV_SIZE_VAR to indicate if this TLV is variable size.
+ *
+ * Note: It is important that the last TLV_ELEM does not have the "\" character.
+*/
+
+/* Size of the TLV Header which is the Tag and Length fields */
+#define WMI_TLV_HDR_SIZE   (1 * sizeof(A_UINT32))
+
+/** TLV Helper macro to get the TLV Header given the pointer
+ *  to the TLV buffer. */
+#define WMITLV_GET_HDR(tlv_buf)        (((A_UINT32 *)(tlv_buf))[0])
+
+/** TLV Helper macro to set the TLV Header given the pointer
+ *  to the TLV buffer. */
+#define WMITLV_SET_HDR(tlv_buf, tag, len) (((A_UINT32 *)(tlv_buf))[0]) = ((tag << 16) | (len & 0x0000FFFF))
+
+/** TLV Helper macro to get the TLV Tag given the TLV header. */
+#define WMITLV_GET_TLVTAG(tlv_header)  ((A_UINT32)((tlv_header)>>16))
+
+/** TLV Helper macro to get the TLV Buffer Length (minus TLV
+ *  header size) given the TLV header. */
+#define WMITLV_GET_TLVLEN(tlv_header)  ((A_UINT32)((tlv_header) & 0x0000FFFF))
+
+/** TLV Helper macro to get the TLV length from TLV structure size by removing TLV header size */
+#define WMITLV_GET_STRUCT_TLVLEN(tlv_struct)    ((A_UINT32)(sizeof(tlv_struct)-WMI_TLV_HDR_SIZE))
+
+/* Indicates whether the TLV is fixed size or variable length */
+#define WMITLV_SIZE_FIX     0
+#define WMITLV_SIZE_VAR     1
+
+typedef struct {
+	A_UINT32 tag_order;
+	A_UINT32 tag_id;
+	A_UINT32 tag_struct_size;
+	A_UINT32 tag_varied_size;
+	A_UINT32 tag_array_size;
+    A_UINT32 cmd_num_tlv;
+} wmitlv_attributes_struc;
+
+
+/* Template structure definition for a variable size array of UINT32 */
+typedef struct {
+    A_UINT32    tlv_header;     /* TLV tag and len; tag equals WMI_TLVTAG_ARRAY_UINT32 */
+    A_UINT32    uint32_array[1]; /* variable length Array of UINT32 */
+} wmitlv_array_uint32;
+
+/* Template structure definition for a variable size array of unknown structure */
+typedef struct {
+    A_UINT32    tlv_header;     /* TLV tag and len; tag equals WMI_TLVTAG_ARRAY_STRUC */
+    A_UINT32    struc_array[1]; /* variable length Array of structures */
+} wmitlv_array_struc;
+
+/*
+ * Used to fill in the "arr_size" parameter when it is not specified and hence, invalid. Can be used to
+ * indicate if the original TLV definition specify this fixed array size.
+ */
+#define WMITLV_ARR_SIZE_INVALID  0x1FE
+
+#define WMITLV_GET_TAG_NUM_TLV_ATTRIB(wmi_cmd_event_id)      \
+       WMI_TLV_HLPR_NUM_TLVS_FOR_##wmi_cmd_event_id
+
+
+void
+wmitlv_set_static_param_tlv_buf(void *param_tlv_buf, A_UINT32 max_tlvs_accomodated);
+
+void
+wmitlv_free_allocated_command_tlvs(
+    A_UINT32 cmd_id,
+    void **wmi_cmd_struct_ptr);
+
+void
+wmitlv_free_allocated_event_tlvs(
+    A_UINT32 event_id,
+    void **wmi_cmd_struct_ptr);
+
+int
+wmitlv_check_command_tlv_params(
+    void *os_ctx, void *param_struc_ptr, A_UINT32 param_buf_len, A_UINT32 wmi_cmd_event_id);
+
+int
+wmitlv_check_event_tlv_params(
+    void *os_ctx, void *param_struc_ptr, A_UINT32 param_buf_len, A_UINT32 wmi_cmd_event_id);
+
+int
+wmitlv_check_and_pad_command_tlvs(
+    void *os_ctx, void *param_struc_ptr, A_UINT32 param_buf_len, A_UINT32 wmi_cmd_event_id, void **wmi_cmd_struct_ptr);
+
+int
+wmitlv_check_and_pad_event_tlvs(
+    void *os_ctx, void *param_struc_ptr, A_UINT32 param_buf_len, A_UINT32 wmi_cmd_event_id, void **wmi_cmd_struct_ptr);
+
+/** This structure is the element for the Version WhiteList
+ *  table. */
+typedef struct {
+    A_UINT32      major;
+    A_UINT32      minor;
+    A_UINT32      namespace_0;
+    A_UINT32      namespace_1;
+    A_UINT32      namespace_2;
+    A_UINT32      namespace_3;
+} wmi_whitelist_version_info;
+
+struct _wmi_abi_version;   /* Forward declaration to make the ARM compiler happy */
+
+int
+wmi_cmp_and_set_abi_version(int num_whitelist, wmi_whitelist_version_info *version_whitelist_table,
+                            struct _wmi_abi_version *my_vers,
+                            struct _wmi_abi_version *opp_vers,
+                            struct _wmi_abi_version *out_vers);
+
+int
+wmi_versions_are_compatible(struct _wmi_abi_version *vers1, struct _wmi_abi_version *vers2);
+
+#endif /*_WMI_TLV_HELPER_H_*/
+

fw/wmi_unified.h

@@ -0,0 +1,16053 @@
+/*
+ * Copyright (c) 2013-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/**
+ * @addtogroup WMIAPI
+ *@{
+ */
+
+/** @file
+ * This file specifies the WMI interface for the  Software Architecture.
+ *
+ * It includes definitions of all the commands and events. Commands are messages
+ * from the host to the target. Events and Replies are messages from the target
+ * to the host.
+ *
+ * Ownership of correctness in regards to WMI commands
+ * belongs to the host driver and the target is not required to validate
+ * parameters for value, proper range, or any other checking.
+ *
+ * Guidelines for extending this interface are below.
+ *
+ * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
+ * 2. Use ONLY A_UINT32 type for defining member variables within WMI command/event
+ *    structures. Do not use A_UINT8, A_UINT16, A_BOOL or enum types within these structures.
+ * 3. DO NOT define bit fields within structures. Implement bit fields using masks
+ *    if necessary. Do not use the programming language's bit field definition.
+ * 4. Define macros for encode/decode of A_UINT8, A_UINT16 fields within the A_UINT32
+ *    variables. Use these macros for set/get of these fields. Try to use this to
+ *    optimize the structure without bloating it with A_UINT32 variables for every lower
+ *    sized field.
+ * 5. Do not use PACK/UNPACK attributes for the structures as each member variable is
+ *    already 4-byte aligned by virtue of being a A_UINT32 type.
+ * 6. Comment each parameter part of the WMI command/event structure by using the
+ *    2 stars at the begining of C comment instead of one star to enable HTML document
+ *    generation using Doxygen.
+ *
+ */
+
+#ifndef _WMI_UNIFIED_H_
+#define _WMI_UNIFIED_H_
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <wlan_defs.h>
+#include <wmi_services.h>
+
+#define ATH_MAC_LEN             6               /**< length of MAC in bytes */
+#define WMI_EVENT_STATUS_SUCCESS 0 /* Success return status to host */
+#define WMI_EVENT_STATUS_FAILURE 1 /* Failure return status to host */
+
+#define MAX_TX_RATE_VALUES      10 /*Max Tx Rates*/
+#define MAX_RSSI_VALUES         10 /*Max Rssi values*/
+#define WMI_MAX_CHAINS 8
+
+/* The WLAN_MAX_AC macro cannot be changed without breaking
+   WMI compatibility. */
+/* The maximum value of access category */
+#define WLAN_MAX_AC  4
+
+/*
+ * These don't necessarily belong here; but as the MS/SM macros require
+ * ar6000_internal.h to be included, it may not be defined as yet.
+ */
+#define WMI_F_MS(_v, _f)                                            \
+            (((_v) & (_f)) >> (_f##_S))
+
+/*
+ * This breaks the "good macro practice" of only referencing each
+ * macro field once (to avoid things like field++ from causing issues.)
+ */
+#define WMI_F_RMW(_var, _v, _f)                                     \
+            do {                                                    \
+                (_var) &= ~(_f);                                    \
+                (_var) |= (((_v) << (_f##_S)) & (_f));              \
+            } while (0)
+
+#define WMI_GET_BITS(_val,_index,_num_bits)                         \
+    (((_val) >> (_index)) & ((1 << (_num_bits)) - 1))
+
+#define WMI_SET_BITS(_var,_index,_num_bits,_val) do {               \
+    (_var) &= ~(((1 << (_num_bits)) - 1) << (_index));              \
+    (_var) |= (((_val) & ((1 << (_num_bits)) - 1)) << (_index));    \
+    } while (0)
+
+/**
+ * A packed array is an array where each entry in the array is less than
+ * or equal to 16 bits, and the entries are stuffed into an A_UINT32 array.
+ * For example, if each entry in the array is 11 bits, then you can stuff
+ * an array of 4 11-bit values into an array of 2 A_UINT32 values.
+ * The first 2 11-bit values will be stored in the first A_UINT32,
+ * and the last 2 11-bit values will be stored in the second A_UINT32.
+ */
+#define WMI_PACKED_ARR_SIZE(num_entries,bits_per_entry) \
+    (((num_entries) / (32 / (bits_per_entry))) +            \
+    (((num_entries) % (32 / (bits_per_entry))) ? 1 : 0))
+
+static INLINE A_UINT32 wmi_packed_arr_get_bits(A_UINT32 *arr,
+    A_UINT32 entry_index, A_UINT32 bits_per_entry)
+{
+    A_UINT32 entries_per_uint = (32 / bits_per_entry);
+    A_UINT32 uint_index = (entry_index / entries_per_uint);
+    A_UINT32 num_entries_in_prev_uints = (uint_index * entries_per_uint);
+    A_UINT32 index_in_uint = (entry_index - num_entries_in_prev_uints);
+    A_UINT32 start_bit_in_uint = (index_in_uint * bits_per_entry);
+    return (arr[uint_index] >> start_bit_in_uint) &
+            ((1 << bits_per_entry) - 1);
+}
+
+static INLINE void wmi_packed_arr_set_bits(A_UINT32 *arr, A_UINT32 entry_index,
+    A_UINT32 bits_per_entry, A_UINT32 val)
+{
+    A_UINT32 entries_per_uint = (32 / bits_per_entry);
+    A_UINT32 uint_index = (entry_index / entries_per_uint);
+    A_UINT32 num_entries_in_prev_uints = (uint_index * entries_per_uint);
+    A_UINT32 index_in_uint = (entry_index - num_entries_in_prev_uints);
+    A_UINT32 start_bit_in_uint = (index_in_uint * bits_per_entry);
+
+    arr[uint_index] &= ~(((1 << bits_per_entry) - 1) << start_bit_in_uint);
+    arr[uint_index] |=
+        ((val & ((1 << bits_per_entry) - 1)) << start_bit_in_uint);
+}
+
+/** 2 word representation of MAC addr */
+typedef struct {
+    /** upper 4 bytes of  MAC address */
+    A_UINT32 mac_addr31to0;
+    /** lower 2 bytes of  MAC address */
+    A_UINT32 mac_addr47to32;
+} wmi_mac_addr;
+
+/** macro to convert MAC address from WMI word format to char array */
+#define WMI_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr,c_macaddr) do {        \
+     (c_macaddr)[0] = (((pwmi_mac_addr)->mac_addr31to0)  >>  0) & 0xff; \
+     (c_macaddr)[1] = (((pwmi_mac_addr)->mac_addr31to0)  >>  8) & 0xff; \
+     (c_macaddr)[2] = (((pwmi_mac_addr)->mac_addr31to0)  >> 16) & 0xff; \
+     (c_macaddr)[3] = (((pwmi_mac_addr)->mac_addr31to0)  >> 24) & 0xff; \
+     (c_macaddr)[4] = (((pwmi_mac_addr)->mac_addr47to32) >>  0) & 0xff; \
+     (c_macaddr)[5] = (((pwmi_mac_addr)->mac_addr47to32) >>  8) & 0xff; \
+   } while (0)
+
+/** macro to convert MAC address from char array to WMI word format */
+#define WMI_CHAR_ARRAY_TO_MAC_ADDR(c_macaddr,pwmi_mac_addr)  do { \
+    (pwmi_mac_addr)->mac_addr31to0 = \
+       (((c_macaddr)[0] <<  0) | \
+        ((c_macaddr)[1] <<  8) | \
+        ((c_macaddr)[2] << 16) | \
+        ((c_macaddr)[3] << 24)); \
+    (pwmi_mac_addr)->mac_addr47to32 = ((c_macaddr)[4] | ((c_macaddr)[5] << 8));\
+   } while (0)
+
+/*
+ * wmi command groups.
+ */
+typedef enum {
+    /* 0 to 2 are reserved */
+    WMI_GRP_START = 0x3,
+    WMI_GRP_SCAN = WMI_GRP_START, /* 0x3 */
+    WMI_GRP_PDEV,           /* 0x4 */
+    WMI_GRP_VDEV,           /* 0x5 */
+    WMI_GRP_PEER,           /* 0x6 */
+    WMI_GRP_MGMT,           /* 0x7 */
+    WMI_GRP_BA_NEG,         /* 0x8 */
+    WMI_GRP_STA_PS,         /* 0x9 */
+    WMI_GRP_DFS,            /* 0xa */
+    WMI_GRP_ROAM,           /* 0xb */
+    WMI_GRP_OFL_SCAN,       /* 0xc */
+    WMI_GRP_P2P,            /* 0xd */
+    WMI_GRP_AP_PS,          /* 0xe */
+    WMI_GRP_RATE_CTRL,      /* 0xf */
+    WMI_GRP_PROFILE,        /* 0x10 */
+    WMI_GRP_SUSPEND,        /* 0x11 */
+    WMI_GRP_BCN_FILTER,     /* 0x12 */
+    WMI_GRP_WOW,            /* 0x13 */
+    WMI_GRP_RTT,            /* 0x14 */
+    WMI_GRP_SPECTRAL,       /* 0x15 */
+    WMI_GRP_STATS,          /* 0x16 */
+    WMI_GRP_ARP_NS_OFL,     /* 0x17 */
+    WMI_GRP_NLO_OFL,        /* 0x18 */
+    WMI_GRP_GTK_OFL,        /* 0x19 */
+    WMI_GRP_CSA_OFL,        /* 0x1a */
+    WMI_GRP_CHATTER,        /* 0x1b */
+    WMI_GRP_TID_ADDBA,      /* 0x1c */
+    WMI_GRP_MISC,           /* 0x1d */
+    WMI_GRP_GPIO,           /* 0x1e */
+    WMI_GRP_FWTEST,         /* 0x1f */
+    WMI_GRP_TDLS,           /* 0x20 */
+    WMI_GRP_RESMGR,         /* 0x21 */
+    WMI_GRP_STA_SMPS,       /* 0x22 */
+    WMI_GRP_WLAN_HB,        /* 0x23 */
+    WMI_GRP_RMC,            /* 0x24 */
+    WMI_GRP_MHF_OFL,        /* 0x25 */
+    WMI_GRP_LOCATION_SCAN,  /* 0x26 */
+    WMI_GRP_OEM,            /* 0x27 */
+    WMI_GRP_NAN,            /* 0x28 */
+    WMI_GRP_COEX,           /* 0x29 */
+    WMI_GRP_OBSS_OFL,       /* 0x2a */
+    WMI_GRP_LPI,            /* 0x2b */
+    WMI_GRP_EXTSCAN,        /* 0x2c */
+    WMI_GRP_DHCP_OFL,       /* 0x2d */
+    WMI_GRP_IPA,            /* 0x2e */
+    WMI_GRP_MDNS_OFL,       /* 0x2f */
+    WMI_GRP_SAP_OFL,        /* 0x30 */
+    WMI_GRP_OCB,            /* 0x31 */
+    WMI_GRP_SOC,            /* 0x32 */
+    WMI_GRP_PKT_FILTER,     /* 0x33 */
+    WMI_GRP_MAWC,           /* 0x34 */
+    WMI_GRP_PMF_OFFLOAD,    /* 0x35 */
+    WMI_GRP_BPF_OFFLOAD,    /* 0x36 Berkeley Packet Filter */
+    WMI_GRP_NAN_DATA,       /* 0x37 */
+    WMI_GRP_PROTOTYPE,      /* 0x38 */
+    WMI_GRP_MONITOR,        /* 0x39 */
+} WMI_GRP_ID;
+
+#define WMI_CMD_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
+#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
+
+/**
+ * Command IDs and commange events
+ */
+typedef enum {
+    /** initialize the wlan sub system */
+    WMI_INIT_CMDID = 0x1,
+
+    /* Scan specific commands */
+
+    /** start scan request to FW  */
+    WMI_START_SCAN_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SCAN),
+    /** stop scan request to FW  */
+    WMI_STOP_SCAN_CMDID,
+    /** full list of channels as defined by the regulatory that will be used by scanner   */
+    WMI_SCAN_CHAN_LIST_CMDID,
+    /** overwrite default priority table in scan scheduler   */
+    WMI_SCAN_SCH_PRIO_TBL_CMDID,
+    /** This command to adjust the priority and min.max_rest_time
+     * of an on ongoing scan request.
+     */
+    WMI_SCAN_UPDATE_REQUEST_CMDID,
+
+    /** set OUI to be used in probe request if enabled */
+    WMI_SCAN_PROB_REQ_OUI_CMDID,
+    /** config adaptive dwell scan */
+    WMI_SCAN_ADAPTIVE_DWELL_CONFIG_CMDID,
+
+    /* PDEV(physical device) specific commands */
+    /** set regulatorty ctl id used by FW to determine the exact ctl power limits */
+    WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PDEV),
+    /** set channel. mainly used for supporting monitor mode */
+    WMI_PDEV_SET_CHANNEL_CMDID,
+    /** set pdev specific parameters */
+    WMI_PDEV_SET_PARAM_CMDID,
+    /** enable packet log */
+    WMI_PDEV_PKTLOG_ENABLE_CMDID,
+    /** disable packet log*/
+    WMI_PDEV_PKTLOG_DISABLE_CMDID,
+    /** set wmm parameters */
+    WMI_PDEV_SET_WMM_PARAMS_CMDID,
+    /** set HT cap ie that needs to be carried probe requests HT/VHT channels */
+    WMI_PDEV_SET_HT_CAP_IE_CMDID,
+    /** set VHT cap ie that needs to be carried on probe requests on VHT channels */
+    WMI_PDEV_SET_VHT_CAP_IE_CMDID,
+
+    /** Command to send the DSCP-to-TID map to the target */
+    WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
+    /** set quiet ie parameters. primarily used in AP mode */
+    WMI_PDEV_SET_QUIET_MODE_CMDID,
+    /** Enable/Disable Green AP Power Save  */
+    WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+    /** get TPC config for the current operating channel */
+    WMI_PDEV_GET_TPC_CONFIG_CMDID,
+
+    /** set the base MAC address for the physical device before a VDEV is created.
+     *  For firmware that doesn't support this feature and this command, the pdev
+     *  MAC address will not be changed. */
+    WMI_PDEV_SET_BASE_MACADDR_CMDID,
+
+    /* eeprom content dump , the same to bdboard data */
+    WMI_PDEV_DUMP_CMDID,
+    /* set LED configuration  */
+    WMI_PDEV_SET_LED_CONFIG_CMDID,
+	/* Get Current temprature of chip in Celcius degree*/
+    WMI_PDEV_GET_TEMPERATURE_CMDID,
+    /* Set LED flashing behavior  */
+    WMI_PDEV_SET_LED_FLASHING_CMDID,
+    /** Enable/Disable Smart Antenna */
+    WMI_PDEV_SMART_ANT_ENABLE_CMDID,
+    /** Set Smart Antenna RX antenna*/
+    WMI_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
+    /** Override the antenna switch table */
+    WMI_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
+    /** Override the CTL table */
+    WMI_PDEV_SET_CTL_TABLE_CMDID,
+    /** Override the array gain table */
+    WMI_PDEV_SET_MIMOGAIN_TABLE_CMDID,
+    /** FIPS test mode command */
+    WMI_PDEV_FIPS_CMDID,
+    /** get CCK ANI level */
+    WMI_PDEV_GET_ANI_CCK_CONFIG_CMDID,
+    /** get OFDM ANI level */
+    WMI_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
+    /** NF Cal Power dBr/dBm */
+    WMI_PDEV_GET_NFCAL_POWER_CMDID,
+    /** TxPPDU TPC */
+    WMI_PDEV_GET_TPC_CMDID,
+    /** Set to enable MIB stats collection */
+    WMI_MIB_STATS_ENABLE_CMDID,
+    /** Set preferred channel list for DBS Mgr */
+    WMI_PDEV_SET_PCL_CMDID,
+    /** Set HW mode. Eg: single MAC, DBS & SBS, see soc_hw_mode_t for values */
+    WMI_PDEV_SET_HW_MODE_CMDID,
+    /** Set DFS, SCAN modes and other FW configurations */
+    WMI_PDEV_SET_MAC_CONFIG_CMDID,
+    /** Set per band and per pdev antenna chains */
+    WMI_PDEV_SET_ANTENNA_MODE_CMDID,
+    /** Periodic channel stats request command */
+    WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID,
+    /** WMI command for power debug framework */
+    WMI_PDEV_WAL_POWER_DEBUG_CMDID,
+    /** set per-AC rx reorder timeouts */
+    WMI_PDEV_SET_REORDER_TIMEOUT_VAL_CMDID,
+    /** WMI command for WOW gpio and type */
+    WMI_PDEV_SET_WAKEUP_CONFIG_CMDID,
+    /* Get current ANT's per chain's RSSI info */
+    WMI_PDEV_GET_ANTDIV_STATUS_CMDID,
+    /** WMI command for getting Chip Power Stats */
+    WMI_PDEV_GET_CHIP_POWER_STATS_CMDID,
+    /** set stats reporting thresholds - see WMI_REPORT_STATS_EVENTID */
+    WMI_PDEV_SET_STATS_THRESHOLD_CMDID,
+
+    /* VDEV (virtual device) specific commands */
+    /** vdev create */
+    WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_VDEV),
+    /** vdev delete */
+    WMI_VDEV_DELETE_CMDID,
+    /** vdev start request */
+    WMI_VDEV_START_REQUEST_CMDID,
+    /** vdev restart request (RX only, NO TX, used for CAC period)*/
+    WMI_VDEV_RESTART_REQUEST_CMDID,
+    /** vdev up request */
+    WMI_VDEV_UP_CMDID,
+    /** vdev stop request */
+    WMI_VDEV_STOP_CMDID,
+    /** vdev down request */
+    WMI_VDEV_DOWN_CMDID,
+    /* set a vdev param */
+    WMI_VDEV_SET_PARAM_CMDID,
+    /* set a key (used for setting per peer unicast and per vdev multicast) */
+    WMI_VDEV_INSTALL_KEY_CMDID,
+
+    /* wnm sleep mode command */
+    WMI_VDEV_WNM_SLEEPMODE_CMDID,
+    WMI_VDEV_WMM_ADDTS_CMDID,
+    WMI_VDEV_WMM_DELTS_CMDID,
+    WMI_VDEV_SET_WMM_PARAMS_CMDID,
+    WMI_VDEV_SET_GTX_PARAMS_CMDID,
+    WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMDID,
+
+    WMI_VDEV_PLMREQ_START_CMDID,
+    WMI_VDEV_PLMREQ_STOP_CMDID,
+    /* TSF timestamp action for specified vdev */
+    WMI_VDEV_TSF_TSTAMP_ACTION_CMDID,
+    /** set the additional IEs in probe requests for scan or
+     *  assoc req etc for frames FW locally generates */
+    WMI_VDEV_SET_IE_CMDID,
+
+    WMI_VDEV_RATEMASK_CMDID,
+    /** ATF VDEV REQUEST commands. */
+    WMI_VDEV_ATF_REQUEST_CMDID,
+    /** Command to send the DSCP-to-TID map to the target for VAP */
+    WMI_VDEV_SET_DSCP_TID_MAP_CMDID,
+    /* Configure filter for Neighbor Rx Pkt (smart mesh selective listening) */
+    WMI_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
+    /** set quiet ie parameters. primarily used in AP mode */
+    WMI_VDEV_SET_QUIET_MODE_CMDID,
+    /** To set custom aggregation size for per vdev */
+    WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID,
+
+    /* peer specific commands */
+
+    /** create a peer */
+    WMI_PEER_CREATE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PEER),
+    /** delete a peer */
+    WMI_PEER_DELETE_CMDID,
+    /** flush specific  tid queues of a peer */
+    WMI_PEER_FLUSH_TIDS_CMDID,
+    /** set a parameter of a peer */
+    WMI_PEER_SET_PARAM_CMDID,
+    /** set peer to associated state. will cary all parameters determined during assocication time */
+    WMI_PEER_ASSOC_CMDID,
+    /**add a wds  (4 address) entry. used only for testing WDS feature on AP products */
+    WMI_PEER_ADD_WDS_ENTRY_CMDID,
+    /**remove wds  (4 address) entry. used only for testing WDS feature on AP products */
+    WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
+    /** set up mcast group infor for multicast to unicast conversion */
+    WMI_PEER_MCAST_GROUP_CMDID,
+    /** request peer info from FW. FW shall respond with PEER_INFO_EVENTID */
+    WMI_PEER_INFO_REQ_CMDID,
+    /** request the estimated link speed for the peer. FW shall respond with
+     *  WMI_PEER_ESTIMATED_LINKSPEED_EVENTID.
+     */
+    WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID,
+    /** Set the conditions to report peer justified rate to driver
+     * The justified rate means the the user-rate is justified by PER.
+     */
+    WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID,
+
+    /** update a wds (4 address) entry */
+    WMI_PEER_UPDATE_WDS_ENTRY_CMDID,
+    /** add a proxy sta entry */
+    WMI_PEER_ADD_PROXY_STA_ENTRY_CMDID,
+    /** Set Smart Antenna TX antenna */
+    WMI_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
+    /** Set Smart Antenna TX train info */
+    WMI_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
+    /** Set SA node config options */
+    WMI_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
+    /** ATF PEER REQUEST commands */
+    WMI_PEER_ATF_REQUEST_CMDID,
+    /** bandwidth fairness (BWF) peer configuration request command */
+    WMI_PEER_BWF_REQUEST_CMDID,
+    /** rx reorder queue setup for peer/tid */
+    WMI_PEER_REORDER_QUEUE_SETUP_CMDID,
+    /** rx reorder queue remove for peer/tid */
+    WMI_PEER_REORDER_QUEUE_REMOVE_CMDID,
+    /** specify a limit for rx A-MPDU block size */
+    WMI_PEER_SET_RX_BLOCKSIZE_CMDID,
+    /** request peer antdiv info from FW. FW shall respond with PEER_ANTDIV_INFO_EVENTID */
+    WMI_PEER_ANTDIV_INFO_REQ_CMDID,
+
+
+    /* beacon/management specific commands */
+
+    /** transmit beacon by reference . used for transmitting beacon on low latency interface like pcie */
+    WMI_BCN_TX_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MGMT),
+    /** transmit beacon by value */
+    WMI_PDEV_SEND_BCN_CMDID,
+    /** set the beacon template. used in beacon offload mode to setup the
+     *  the common beacon template with the FW to be used by FW to generate beacons */
+    WMI_BCN_TMPL_CMDID,
+    /** set beacon filter with FW */
+    WMI_BCN_FILTER_RX_CMDID,
+    /* enable/disable filtering of probe requests in the firmware */
+    WMI_PRB_REQ_FILTER_RX_CMDID,
+    /** transmit management frame by value. will be deprecated */
+    WMI_MGMT_TX_CMDID,
+    /** set the probe response template. used in beacon offload mode to setup the
+     *  the common probe response template with the FW to be used by FW to generate
+     *  probe responses */
+    WMI_PRB_TMPL_CMDID,
+    /** Transmit Mgmt frame by reference */
+    WMI_MGMT_TX_SEND_CMDID,
+
+    /** commands to directly control ba negotiation directly from host. only used in test mode */
+
+    /** turn off FW Auto addba mode and let host control addba */
+    WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_BA_NEG),
+    /** send add ba request */
+    WMI_ADDBA_SEND_CMDID,
+    WMI_ADDBA_STATUS_CMDID,
+    /** send del ba */
+    WMI_DELBA_SEND_CMDID,
+    /** set add ba response will be used by FW to generate addba response*/
+    WMI_ADDBA_SET_RESP_CMDID,
+    /** send single VHT MPDU with AMSDU */
+    WMI_SEND_SINGLEAMSDU_CMDID,
+
+    /** Station power save specific config */
+    /** enable/disable station powersave */
+    WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_STA_PS),
+    /** set station power save specific parameter */
+    WMI_STA_POWERSAVE_PARAM_CMDID,
+    /** set station mimo powersave mode */
+    WMI_STA_MIMO_PS_MODE_CMDID,
+
+
+    /** DFS-specific commands */
+    /** enable DFS (radar detection)*/
+    WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_DFS),
+    /** disable DFS (radar detection)*/
+    WMI_PDEV_DFS_DISABLE_CMDID,
+    /** enable DFS phyerr/parse filter offload */
+    WMI_DFS_PHYERR_FILTER_ENA_CMDID,
+    /** enable DFS phyerr/parse filter offload */
+    WMI_DFS_PHYERR_FILTER_DIS_CMDID,
+
+    /* Roaming specific  commands */
+    /** set roam scan mode */
+    WMI_ROAM_SCAN_MODE = WMI_CMD_GRP_START_ID(WMI_GRP_ROAM),
+    /** set roam scan rssi threshold below which roam scan is enabled  */
+    WMI_ROAM_SCAN_RSSI_THRESHOLD,
+    /** set roam scan period for periodic roam scan mode  */
+    WMI_ROAM_SCAN_PERIOD,
+    /** set roam scan trigger rssi change threshold   */
+    WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+    /** set roam AP profile   */
+    WMI_ROAM_AP_PROFILE,
+    /** set channel list for roam scans */
+    WMI_ROAM_CHAN_LIST,
+    /** Stop scan command */
+	WMI_ROAM_SCAN_CMD,
+    /** roaming sme offload sync complete */
+    WMI_ROAM_SYNCH_COMPLETE,
+    /** set ric request element for 11r roaming */
+	WMI_ROAM_SET_RIC_REQUEST_CMDID,
+	/** Invoke roaming forcefully */
+    WMI_ROAM_INVOKE_CMDID,
+    /** roaming filter cmd to allow further filtering of roaming candidate */
+    WMI_ROAM_FILTER_CMDID,
+    /** set gateway ip, mac and retries for subnet change detection */
+    WMI_ROAM_SUBNET_CHANGE_CONFIG_CMDID,
+    /** configure thresholds for MAWC */
+    WMI_ROAM_CONFIGURE_MAWC_CMDID,
+    /** configure MultiBand Operation(refer WFA MBO spec) parameter */
+    WMI_ROAM_SET_MBO_PARAM_CMDID, /* DEPRECATED */
+
+    /** offload scan specific commands */
+    /** set offload scan AP profile   */
+    WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP_START_ID(WMI_GRP_OFL_SCAN),
+    /** remove offload scan AP profile   */
+    WMI_OFL_SCAN_REMOVE_AP_PROFILE,
+    /** set offload scan period   */
+    WMI_OFL_SCAN_PERIOD,
+
+    /* P2P specific commands */
+    /**set P2P device info. FW will used by FW to create P2P IE to be carried in probe response
+     * generated during p2p listen and for p2p discoverability  */
+    WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP_START_ID(WMI_GRP_P2P),
+    /** enable/disable p2p discoverability on STA/AP VDEVs  */
+    WMI_P2P_DEV_SET_DISCOVERABILITY,
+    /** set p2p ie to be carried in beacons generated by FW for GO  */
+    WMI_P2P_GO_SET_BEACON_IE,
+    /** set p2p ie to be carried in probe response frames generated by FW for GO  */
+    WMI_P2P_GO_SET_PROBE_RESP_IE,
+    /** set the vendor specific p2p ie data. FW will use this to parse the P2P NoA
+     *  attribute in the beacons/probe responses received.
+     *  Note: This command is currently used only for Apple P2P implementation.
+     */
+    WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
+    /** set the configure of p2p find offload */
+    WMI_P2P_DISC_OFFLOAD_CONFIG_CMDID,
+    /** set the vendor specific p2p ie data for p2p find offload using */
+    WMI_P2P_DISC_OFFLOAD_APPIE_CMDID,
+    /** set the BSSID/device name pattern of p2p find offload */
+    WMI_P2P_DISC_OFFLOAD_PATTERN_CMDID,
+    /** set OppPS related parameters **/
+    WMI_P2P_SET_OPPPS_PARAM_CMDID,
+    /** set listen offload start related parameters */
+    WMI_P2P_LISTEN_OFFLOAD_START_CMDID,
+    /** set listen offload stop related parameters */
+    WMI_P2P_LISTEN_OFFLOAD_STOP_CMDID,
+
+    /** AP power save specific config */
+    /** set AP power save specific param */
+    WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_AP_PS),
+    /** set AP UAPSD coex pecific param */
+    WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
+    /** set Enhanced Green AP param */
+    WMI_AP_PS_EGAP_PARAM_CMDID,
+
+    /** Rate-control specific commands */
+    WMI_PEER_RATE_RETRY_SCHED_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_RATE_CTRL),
+
+    /** WLAN Profiling commands. */
+    WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PROFILE),
+    WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+    WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+    WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+    WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+
+    /** Suspend resume command Ids */
+    WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SUSPEND),
+    WMI_PDEV_RESUME_CMDID,
+
+    /* Beacon filter commands */
+    /** add a beacon filter */
+    WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_BCN_FILTER),
+    /** remove a  beacon filter */
+    WMI_RMV_BCN_FILTER_CMDID,
+
+    /* WOW Specific WMI commands*/
+    /** add pattern for awake */
+    WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_WOW),
+    /** deleta a wake pattern */
+    WMI_WOW_DEL_WAKE_PATTERN_CMDID,
+    /** enable/deisable wake event  */
+    WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+    /** enable WOW  */
+    WMI_WOW_ENABLE_CMDID,
+    /** host woke up from sleep event to FW. Generated in response to WOW Hardware event */
+    WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+    /* IOAC add keep alive cmd. */
+    WMI_WOW_IOAC_ADD_KEEPALIVE_CMDID,
+    /* IOAC del keep alive cmd. */
+    WMI_WOW_IOAC_DEL_KEEPALIVE_CMDID,
+    /* IOAC add pattern for awake */
+    WMI_WOW_IOAC_ADD_WAKE_PATTERN_CMDID,
+    /* IOAC deleta a wake pattern */
+    WMI_WOW_IOAC_DEL_WAKE_PATTERN_CMDID,
+    /* D0-WOW enable or disable cmd */
+    WMI_D0_WOW_ENABLE_DISABLE_CMDID,
+    /* enable extend WoW */
+    WMI_EXTWOW_ENABLE_CMDID,
+    /* Extend WoW command to configure app type1 parameter */
+    WMI_EXTWOW_SET_APP_TYPE1_PARAMS_CMDID,
+    /* Extend WoW command to configure app type2 parameter */
+    WMI_EXTWOW_SET_APP_TYPE2_PARAMS_CMDID,
+    /* enable ICMPv6 Network advertisement filtering */
+    WMI_WOW_ENABLE_ICMPV6_NA_FLT_CMDID,
+    /*
+     * Set a pattern to match UDP packet in WOW mode.
+     * If match, construct a tx frame in a local buffer
+     * to send through the peer AP to the entity in the
+     * IP network that sent the UDP packet to this STA.
+     */
+    WMI_WOW_UDP_SVC_OFLD_CMDID,
+    /* configure WOW host wakeup PIN pattern */
+    WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMDID,
+
+    /* Set which action category should wake the host from suspend */
+    WMI_WOW_SET_ACTION_WAKE_UP_CMDID,
+
+    /* RTT measurement related cmd */
+    /** request to make an RTT measurement */
+    WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_RTT),
+    /** request to report a tsf measurement */
+    WMI_RTT_TSF_CMDID,
+
+    /** spectral scan command */
+    /** configure spectral scan */
+    WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SPECTRAL),
+    /** enable/disable spectral scan and trigger */
+    WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+
+    /* F/W stats */
+    /** one time request for stats */
+    WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_STATS),
+    /** Push MCC Adaptive Scheduler Stats to Firmware */
+    WMI_MCC_SCHED_TRAFFIC_STATS_CMDID,
+    /** one time request for txrx stats */
+    WMI_REQUEST_STATS_EXT_CMDID,
+    /* Link Layer stats */
+    /** Request for link layer stats */
+    WMI_REQUEST_LINK_STATS_CMDID,
+    /** Request for setting params to link layer stats */
+    WMI_START_LINK_STATS_CMDID,
+    /** Request to clear stats*/
+    WMI_CLEAR_LINK_STATS_CMDID,
+
+    /** Request for getting the Firmware Memory Dump */
+    WMI_GET_FW_MEM_DUMP_CMDID,
+
+    /** Request to flush of the buffered debug messages */
+    WMI_DEBUG_MESG_FLUSH_CMDID,
+
+    /** Cmd to configure the verbose level */
+    WMI_DIAG_EVENT_LOG_CONFIG_CMDID,
+
+    /** One time request for wlan stats */
+    WMI_REQUEST_WLAN_STATS_CMDID,
+
+    /** ARP OFFLOAD REQUEST*/
+    WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_ARP_NS_OFL),
+
+    /** Proactive ARP Response Add Pattern Command*/
+    WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID,
+
+    /** Proactive ARP Response Del Pattern Command*/
+    WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID,
+
+    /** NS offload confid*/
+    WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_NLO_OFL),
+
+    /** APFIND Config */
+    WMI_APFIND_CMDID,
+
+    /** Passpoint list config  */
+    WMI_PASSPOINT_LIST_CONFIG_CMDID,
+
+    /** configure supprssing parameters for MAWC */
+    WMI_NLO_CONFIGURE_MAWC_CMDID,
+
+    /* GTK offload Specific WMI commands*/
+    WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_GTK_OFL),
+
+    /* CSA offload Specific WMI commands*/
+    /** csa offload enable */
+    WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_CSA_OFL),
+    /** chan switch command */
+    WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
+
+    /* Chatter commands*/
+    /* Change chatter mode of operation */
+    WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_CHATTER),
+    /** chatter add coalescing filter command */
+    WMI_CHATTER_ADD_COALESCING_FILTER_CMDID,
+    /** chatter delete coalescing filter command */
+    WMI_CHATTER_DELETE_COALESCING_FILTER_CMDID,
+    /** chatter coalecing query command */
+    WMI_CHATTER_COALESCING_QUERY_CMDID,
+
+    /**addba specific commands */
+    /** start the aggregation on this TID */
+    WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_TID_ADDBA),
+    /** stop the aggregation on this TID */
+    WMI_PEER_TID_DELBA_CMDID,
+
+    /** set station mimo powersave method */
+    WMI_STA_DTIM_PS_METHOD_CMDID,
+    /** Configure the Station UAPSD AC Auto Trigger Parameters */
+    WMI_STA_UAPSD_AUTO_TRIG_CMDID,
+    /** Configure the Keep Alive Parameters */
+    WMI_STA_KEEPALIVE_CMDID,
+
+    /* Request ssn from target for a sta/tid pair */
+    WMI_BA_REQ_SSN_CMDID,
+
+
+    /* misc command group */
+    /** echo command mainly used for testing */
+    WMI_ECHO_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MISC),
+
+    /* !!IMPORTANT!!
+     * If you need to add a new WMI command to the WMI_GRP_MISC sub-group,
+     * please make sure you add it BEHIND WMI_PDEV_UTF_CMDID,
+     * as we MUST have a fixed value here to maintain compatibility between
+     * UTF and the ART2 driver
+     */
+    /** UTF WMI commands */
+    WMI_PDEV_UTF_CMDID,
+
+    /** set debug log config */
+    WMI_DBGLOG_CFG_CMDID,
+    /* QVIT specific command id */
+    WMI_PDEV_QVIT_CMDID,
+    /* Factory Testing Mode request command
+     * used for integrated chipsets */
+    WMI_PDEV_FTM_INTG_CMDID,
+    /* set and get keepalive parameters command */
+    WMI_VDEV_SET_KEEPALIVE_CMDID,
+    WMI_VDEV_GET_KEEPALIVE_CMDID,
+    /* For fw recovery test command */
+    WMI_FORCE_FW_HANG_CMDID,
+    /* Set Mcast/Bdcast filter */
+    WMI_SET_MCASTBCAST_FILTER_CMDID,
+    /** set thermal management params **/
+    WMI_THERMAL_MGMT_CMDID,
+    /** set host auto shutdown params **/
+    WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID,
+    /** set tpc chainmask config command */
+    WMI_TPC_CHAINMASK_CONFIG_CMDID,
+    /** set Antenna diversity command */
+    WMI_SET_ANTENNA_DIVERSITY_CMDID,
+    /** Set OCB Sched Request, deprecated */
+    WMI_OCB_SET_SCHED_CMDID,
+    /** Set rssi monitoring config command */
+    WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID,
+    /** Enable/disable Large Receive Offload processing; provide cfg params */
+    WMI_LRO_CONFIG_CMDID,
+    /** transfer data from host to firmware to write flash */
+    WMI_TRANSFER_DATA_TO_FLASH_CMDID,
+    /** Command to enable/disable filtering of multicast IP with unicast mac */
+    WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID,
+    /** Command to control WISA mode */
+    WMI_VDEV_WISA_CMDID,
+    /** set debug log time stamp sync up with host */
+    WMI_DBGLOG_TIME_STAMP_SYNC_CMDID,
+    /** Command for host to set/delete multiple mcast filters */
+    WMI_SET_MULTIPLE_MCAST_FILTER_CMDID,
+    /** upload a requested section of data from firmware flash to host */
+    WMI_READ_DATA_FROM_FLASH_CMDID,
+
+    /* GPIO Configuration */
+    WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_GPIO),
+    WMI_GPIO_OUTPUT_CMDID,
+
+    /* Txbf configuration command */
+    WMI_TXBF_CMDID,
+
+    /* FWTEST Commands */
+    WMI_FWTEST_VDEV_MCC_SET_TBTT_MODE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_FWTEST),
+	/** set NoA descs **/
+	WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID,
+	/* UNIT Tests  */
+	WMI_UNIT_TEST_CMDID,
+    /* set debug and tuning parameters */
+    WMI_FWTEST_CMDID,
+    /* Q-Boost configuration test commands */
+    WMI_QBOOST_CFG_CMDID,
+
+    /** TDLS Configuration */
+    /** enable/disable TDLS */
+    WMI_TDLS_SET_STATE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_TDLS),
+    /** set tdls peer state */
+    WMI_TDLS_PEER_UPDATE_CMDID,
+    /** TDLS Offchannel control */
+    WMI_TDLS_SET_OFFCHAN_MODE_CMDID,
+
+    /** Resmgr Configuration */
+    /** Adaptive OCS is enabled by default in the FW. This command is used to
+     * disable FW based adaptive OCS.
+     */
+    WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_RESMGR),
+    /** set the requested channel time quota for the home channels */
+    WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID,
+    /** set the requested latency for the home channels */
+    WMI_RESMGR_SET_CHAN_LATENCY_CMDID,
+
+    /** STA SMPS Configuration */
+    /** force SMPS mode */
+    WMI_STA_SMPS_FORCE_MODE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_STA_SMPS),
+    /** set SMPS parameters */
+    WMI_STA_SMPS_PARAM_CMDID,
+
+    /* Wlan HB commands*/
+    /* enalbe/disable wlan HB */
+    WMI_HB_SET_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_WLAN_HB),
+    /* set tcp parameters for wlan HB */
+    WMI_HB_SET_TCP_PARAMS_CMDID,
+    /* set tcp pkt filter for wlan HB */
+    WMI_HB_SET_TCP_PKT_FILTER_CMDID,
+    /* set udp parameters for wlan HB */
+    WMI_HB_SET_UDP_PARAMS_CMDID,
+    /* set udp pkt filter for wlan HB */
+    WMI_HB_SET_UDP_PKT_FILTER_CMDID,
+
+    /** Wlan RMC commands*/
+    /** enable/disable RMC */
+    WMI_RMC_SET_MODE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_RMC),
+    /** configure action frame period */
+    WMI_RMC_SET_ACTION_PERIOD_CMDID,
+    /** For debug/future enhancement purposes only,
+     *  configures/finetunes RMC algorithms */
+    WMI_RMC_CONFIG_CMDID,
+    /** select manual leader */
+    WMI_RMC_SET_MANUAL_LEADER_CMDID,
+
+    /** WLAN MHF offload commands */
+    /** enable/disable MHF offload */
+    WMI_MHF_OFFLOAD_SET_MODE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MHF_OFL),
+    /** Plumb routing table for MHF offload */
+    WMI_MHF_OFFLOAD_PLUMB_ROUTING_TBL_CMDID,
+
+    /*location scan commands*/
+    /*start batch scan*/
+    WMI_BATCH_SCAN_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_LOCATION_SCAN),
+    /*stop batch scan*/
+    WMI_BATCH_SCAN_DISABLE_CMDID,
+    /*get batch scan result*/
+    WMI_BATCH_SCAN_TRIGGER_RESULT_CMDID,
+    /* OEM related cmd */
+    WMI_OEM_REQ_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_OEM),
+    WMI_OEM_REQUEST_CMDID, /* UNUSED */
+
+    /** Nan Request */
+    WMI_NAN_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_NAN),
+
+    /** Modem power state command */
+    WMI_MODEM_POWER_STATE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_COEX),
+    WMI_CHAN_AVOID_UPDATE_CMDID,
+    WMI_COEX_CONFIG_CMDID,
+    WMI_CHAN_AVOID_RPT_ALLOW_CMDID,
+    WMI_COEX_GET_ANTENNA_ISOLATION_CMDID,
+
+    /**
+     *  OBSS scan offload enable/disable commands
+     *  OBSS scan enable CMD will send to FW after VDEV UP, if these conditions are true:
+     *  1.  WMI_SERVICE_OBSS_SCAN is reported by FW in service ready,
+     *  2.  STA connect to a 2.4Ghz ht20/ht40 AP,
+     *  3.  AP enable 20/40 coexistence (OBSS_IE-74 can be found in beacon or association response)
+     *  If OBSS parameters from beacon changed, also use enable CMD to update parameters.
+     *  OBSS scan disable CMD will send to FW if have enabled when tearing down connection.
+     */
+    WMI_OBSS_SCAN_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_OBSS_OFL),
+    WMI_OBSS_SCAN_DISABLE_CMDID,
+
+    /**LPI commands*/
+    /**LPI mgmt snooping config command*/
+    WMI_LPI_MGMT_SNOOPING_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_LPI),
+    /**LPI scan start command*/
+    WMI_LPI_START_SCAN_CMDID,
+    /**LPI scan stop command*/
+    WMI_LPI_STOP_SCAN_CMDID,
+
+    /** ExtScan commands */
+    WMI_EXTSCAN_START_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_EXTSCAN),
+    WMI_EXTSCAN_STOP_CMDID,
+    WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID,
+    WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID,
+    WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID,
+    WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID,
+    WMI_EXTSCAN_SET_CAPABILITIES_CMDID,
+    WMI_EXTSCAN_GET_CAPABILITIES_CMDID,
+    WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID,
+    WMI_EXTSCAN_CONFIGURE_MAWC_CMDID,
+
+    /** DHCP server offload commands */
+    WMI_SET_DHCP_SERVER_OFFLOAD_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_DHCP_OFL),
+
+    /** IPA Offload features related commands */
+    WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_IPA),
+
+    /** mDNS responder offload commands */
+    WMI_MDNS_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MDNS_OFL),
+    WMI_MDNS_SET_FQDN_CMDID,
+    WMI_MDNS_SET_RESPONSE_CMDID,
+    WMI_MDNS_GET_STATS_CMDID,
+
+    /* enable/disable AP Authentication offload */
+    WMI_SAP_OFL_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SAP_OFL),
+    WMI_SAP_SET_BLACKLIST_PARAM_CMDID,
+
+    /** Out-of-context-of-BSS (OCB) commands */
+    WMI_OCB_SET_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_OCB),
+    WMI_OCB_SET_UTC_TIME_CMDID,
+    WMI_OCB_START_TIMING_ADVERT_CMDID,
+    WMI_OCB_STOP_TIMING_ADVERT_CMDID,
+    WMI_OCB_GET_TSF_TIMER_CMDID,
+    WMI_DCC_GET_STATS_CMDID,
+    WMI_DCC_CLEAR_STATS_CMDID,
+    WMI_DCC_UPDATE_NDL_CMDID,
+
+    /* System-On-Chip commands */
+    WMI_SOC_SET_PCL_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SOC),
+    WMI_SOC_SET_HW_MODE_CMDID,
+    WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID,
+    WMI_SOC_SET_ANTENNA_MODE_CMDID,
+
+    /* packet filter commands */
+    WMI_PACKET_FILTER_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PKT_FILTER),
+    WMI_PACKET_FILTER_ENABLE_CMDID,
+
+    /** Motion Aided WiFi Connectivity (MAWC) commands */
+    WMI_MAWC_SENSOR_REPORT_IND_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MAWC),
+
+    /** WMI commands related to PMF 11w Offload */
+    WMI_PMF_OFFLOAD_SET_SA_QUERY_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PMF_OFFLOAD),
+
+    /** WMI commands related to pkt filter (BPF) offload */
+    WMI_BPF_GET_CAPABILITY_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_BPF_OFFLOAD),
+    WMI_BPF_GET_VDEV_STATS_CMDID,
+    WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID,
+    WMI_BPF_DEL_VDEV_INSTRUCTIONS_CMDID,
+
+    /** WMI commands related to monitor mode. */
+    WMI_MNT_FILTER_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MONITOR),
+
+    /**
+     * Nan Data commands
+     * NDI - NAN Data Interface
+     * NDP - NAN Data Path
+     */
+    /* Commands in prototyping phase */
+    WMI_NDI_GET_CAP_REQ_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PROTOTYPE),
+    WMI_NDP_INITIATOR_REQ_CMDID,
+    WMI_NDP_RESPONDER_REQ_CMDID,
+    WMI_NDP_END_REQ_CMDID,
+} WMI_CMD_ID;
+
+typedef enum {
+    /** WMI service is ready; after this event WMI messages can be sent/received  */
+    WMI_SERVICE_READY_EVENTID = 0x1,
+    /** WMI is ready; after this event the wlan subsystem is initialized and can process commands. */
+    WMI_READY_EVENTID,
+
+    /** Specify what WMI services the target supports (for services beyond
+     * what fits in the WMI_SERVICE_READY_EVENT message's wmi_service_bitmap)
+     */
+    WMI_SERVICE_AVAILABLE_EVENTID,
+
+    /** Scan specific events */
+    WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
+
+    /* PDEV specific events */
+    /** TPC config for the current operating channel */
+    WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
+    /** Channel stats event    */
+    WMI_CHAN_INFO_EVENTID,
+
+    /** PHY Error specific WMI event */
+    WMI_PHYERR_EVENTID,
+
+    /** eeprom dump event  */
+    WMI_PDEV_DUMP_EVENTID,
+
+    /** traffic pause event */
+    WMI_TX_PAUSE_EVENTID,
+
+    /** DFS radar event  */
+    WMI_DFS_RADAR_EVENTID,
+
+    /** track L1SS entry and residency event */
+    WMI_PDEV_L1SS_TRACK_EVENTID,
+
+	/** Report current temprature of the chip in Celcius degree */
+	WMI_PDEV_TEMPERATURE_EVENTID,
+
+    /** Extension of WMI_SERVICE_READY msg with extra target capability info */
+    WMI_SERVICE_READY_EXT_EVENTID,
+
+    /** FIPS test mode event */
+    WMI_PDEV_FIPS_EVENTID,
+
+    /** Channel hopping avoidance */
+    WMI_PDEV_CHANNEL_HOPPING_EVENTID,
+
+    /** CCK ANI level event */
+    WMI_PDEV_ANI_CCK_LEVEL_EVENTID,
+
+    /** OFDM ANI level event */
+    WMI_PDEV_ANI_OFDM_LEVEL_EVENTID,
+
+    /** Tx PPDU params */
+    WMI_PDEV_TPC_EVENTID,
+
+    /** NF Cal Power in DBR/DBM for all channels */
+    WMI_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
+
+    /** SOC/PDEV events */
+    WMI_PDEV_SET_HW_MODE_RESP_EVENTID,
+    WMI_PDEV_HW_MODE_TRANSITION_EVENTID,
+    WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID,
+    /** Report ANT DIV feature's status */
+    WMI_PDEV_ANTDIV_STATUS_EVENTID,
+    /** Chip level Power stats */
+    WMI_PDEV_CHIP_POWER_STATS_EVENTID,
+
+    /* VDEV specific events */
+    /** VDEV started event in response to VDEV_START request */
+    WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
+    /** vdev stopped event , generated in response to VDEV_STOP request */
+    WMI_VDEV_STOPPED_EVENTID,
+    /* Indicate the set key (used for setting per
+     * peer unicast and per vdev multicast)
+     * operation has completed */
+    WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
+    /* NOTE: WMI_VDEV_MCC_BCN_INTERVAL_CHANGE_REQ_EVENTID would be deprecated. Please
+     don't use this for any new implementations */
+    /* Firmware requests dynamic change to a specific beacon interval for a specific vdev ID in MCC scenario.
+     This request is valid only for vdevs operating in soft AP or P2P GO mode */
+    WMI_VDEV_MCC_BCN_INTERVAL_CHANGE_REQ_EVENTID,
+
+    /* Return the TSF timestamp of specified vdev */
+    WMI_VDEV_TSF_REPORT_EVENTID,
+
+    /* FW response to Host for vdev delete cmdid */
+    WMI_VDEV_DELETE_RESP_EVENTID,
+
+    /* peer  specific events */
+    /** FW reauet to kick out the station for reasons like inactivity,lack of response ..etc */
+    WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
+
+    /** Peer Info Event with data_rate, rssi, tx_fail_cnt etc */
+    WMI_PEER_INFO_EVENTID,
+
+    /** Event indicating that TX fail count reaching threshold */
+    WMI_PEER_TX_FAIL_CNT_THR_EVENTID,
+
+    /* Return the estimate link speed for the Peer specified in the
+     * WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID command.
+     */
+    WMI_PEER_ESTIMATED_LINKSPEED_EVENTID,
+    /* Return the peer state
+     * WMI_PEER_SET_PARAM_CMDID, WMI_PEER_AUTHORIZE
+     */
+    WMI_PEER_STATE_EVENTID,
+
+    /* Peer Assoc Conf event to confirm fw had received PEER_ASSOC_CMD.
+     * After that, host will send Mx message.
+     * Otherwise, host will pause any Mx(STA:M2/M4) message
+     */
+    WMI_PEER_ASSOC_CONF_EVENTID,
+
+    /* FW response to Host for peer delete cmdid */
+    WMI_PEER_DELETE_RESP_EVENTID,
+
+    /** Valid rate code list for peer  */
+    WMI_PEER_RATECODE_LIST_EVENTID,
+    WMI_WDS_PEER_EVENTID,
+    WMI_PEER_STA_PS_STATECHG_EVENTID,
+    /** Peer Ant Div Info Event with rssi per chain, etc */
+    WMI_PEER_ANTDIV_INFO_EVENTID,
+
+    /* beacon/mgmt specific events */
+    /** RX management frame. the entire frame is carried along with the event.  */
+    WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
+    /** software beacon alert event to Host requesting host to Queue a beacon for transmission
+     use only in host beacon mode */
+    WMI_HOST_SWBA_EVENTID,
+    /** beacon tbtt offset event indicating the tsf offset of the tbtt from the theritical value.
+     tbtt offset is normally 0 and will be non zero if there are multiple VDEVs operating in
+     staggered beacon transmission mode */
+    WMI_TBTTOFFSET_UPDATE_EVENTID,
+
+    /** event after the first beacon is transmitted following
+             a change in the template.*/
+    WMI_OFFLOAD_BCN_TX_STATUS_EVENTID,
+    /** event after the first probe response is transmitted following
+             a change in the template.*/
+    WMI_OFFLOAD_PROB_RESP_TX_STATUS_EVENTID,
+    /** Event for Mgmt TX completion event */
+    WMI_MGMT_TX_COMPLETION_EVENTID,
+    /** Event for Mgmt TX bundle completion event */
+    WMI_MGMT_TX_BUNDLE_COMPLETION_EVENTID,
+
+
+    /*ADDBA Related WMI Events*/
+    /** Indication the completion of the prior
+     WMI_PEER_TID_DELBA_CMDID(initiator) */
+    WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
+    /** Indication the completion of the prior
+     *WMI_PEER_TID_ADDBA_CMDID(initiator) */
+    WMI_TX_ADDBA_COMPLETE_EVENTID,
+
+    /* Seq num returned from hw for a sta/tid pair */
+    WMI_BA_RSP_SSN_EVENTID,
+
+    /* Aggregation state requested by BTC */
+    WMI_AGGR_STATE_TRIG_EVENTID,
+
+    /** Roam event to trigger roaming on host */
+    WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
+
+    /** matching AP found from list of profiles */
+    WMI_PROFILE_MATCH,
+    /** roam synch event */
+    WMI_ROAM_SYNCH_EVENTID,
+
+    /** P2P disc found */
+    WMI_P2P_DISC_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_P2P),
+    /** send noa info to host when noa is changed for beacon tx offload enable */
+    WMI_P2P_NOA_EVENTID,
+    /** send p2p listen offload stopped event with different reason */
+    WMI_P2P_LISTEN_OFFLOAD_STOPPED_EVENTID,
+
+    /** Send EGAP Info to host */
+    WMI_AP_PS_EGAP_INFO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_AP_PS),
+
+    /* send pdev resume event to host after pdev resume. */
+    WMI_PDEV_RESUME_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SUSPEND),
+
+    /** WOW wake up host event.generated in response to WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID.
+     will cary wake reason */
+    WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
+    WMI_D0_WOW_DISABLE_ACK_EVENTID,
+    WMI_WOW_INITIAL_WAKEUP_EVENTID,
+
+    /*RTT related event ID*/
+    /** RTT measurement report */
+    WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
+    /** TSF measurement report */
+    WMI_TSF_MEASUREMENT_REPORT_EVENTID,
+    /** RTT error report */
+    WMI_RTT_ERROR_REPORT_EVENTID,
+
+    /*STATS specific events*/
+    /** txrx stats event requested by host */
+    WMI_STATS_EXT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_STATS),
+    /** FW iface link stats Event  */
+    WMI_IFACE_LINK_STATS_EVENTID,
+    /** FW iface peer link stats Event  */
+    WMI_PEER_LINK_STATS_EVENTID,
+    /** FW Update radio stats Event  */
+    WMI_RADIO_LINK_STATS_EVENTID,
+
+    /**  Firmware memory dump Complete event*/
+    WMI_UPDATE_FW_MEM_DUMP_EVENTID,
+
+    /** Event indicating the DIAG logs/events supported by FW */
+    WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID,
+
+    /** Instantaneous RSSI event */
+    WMI_INST_RSSI_STATS_EVENTID,
+
+    /** FW update tx power levels event */
+    WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID,
+
+    /** This event is used to report wlan stats to host.
+     * It is triggered under 3 conditions:
+     * (a) Periodic timer timed out, based on the period specified
+     *     by WMI_PDEV_PARAM_STATS_OBSERVATION_PERIOD
+     * (b) Whenever any of the (enabled) stats thresholds specified
+     *     in the WMI_PDEV_SET_STATS_THRESHOLD_CMD message is exceeded
+     *     within the current stats period.
+     * (c) In response to the one-time wlan stats request of
+     *     WMI_REQUEST_WLAN_STATS_CMDID from host.
+     *
+     *  If this event is triggered by condition a or b,
+     *  the stats counters are cleared at the start of each period.
+     *  But if it is triggered by condition c, stats counters won't be cleared.
+     */
+    WMI_REPORT_STATS_EVENTID,
+
+
+    /* NLO specific events */
+    /** NLO match event after the first match */
+    WMI_NLO_MATCH_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_NLO_OFL),
+
+    /** NLO scan complete event */
+    WMI_NLO_SCAN_COMPLETE_EVENTID,
+
+    /** APFIND specific events */
+    WMI_APFIND_EVENTID,
+
+    /** passpoint network match event */
+    WMI_PASSPOINT_MATCH_EVENTID,
+
+    /** GTK offload stautus event requested by host */
+    WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
+
+    /** GTK offload failed to rekey event */
+    WMI_GTK_REKEY_FAIL_EVENTID,
+    /* CSA IE received event */
+    WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
+
+    /*chatter query reply event*/
+    WMI_CHATTER_PC_QUERY_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CHATTER),
+
+    /** echo event in response to echo command */
+    WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
+
+    /* !!IMPORTANT!!
+     * If you need to add a new WMI event ID to the WMI_GRP_MISC sub-group,
+     * please make sure you add it BEHIND WMI_PDEV_UTF_EVENTID,
+     * as we MUST have a fixed value here to maintain compatibility between
+     * UTF and the ART2 driver
+     */
+    /** UTF specific WMI event */
+    WMI_PDEV_UTF_EVENTID,
+
+    /** event carries buffered debug messages  */
+    WMI_DEBUG_MESG_EVENTID,
+    /** FW stats(periodic or on shot)  */
+    WMI_UPDATE_STATS_EVENTID,
+    /** debug print message used for tracing FW code while debugging  */
+    WMI_DEBUG_PRINT_EVENTID,
+    /** DCS wlan or non-wlan interference event
+     */
+    WMI_DCS_INTERFERENCE_EVENTID,
+    /** VI spoecific event  */
+    WMI_PDEV_QVIT_EVENTID,
+    /** FW code profile data in response to profile request  */
+    WMI_WLAN_PROFILE_DATA_EVENTID,
+    /* Factory Testing Mode request event
+     * used for integrated chipsets */
+    WMI_PDEV_FTM_INTG_EVENTID,
+    /* avoid list of frequencies .
+     */
+    WMI_WLAN_FREQ_AVOID_EVENTID,
+    /* Indicate the keepalive parameters */
+    WMI_VDEV_GET_KEEPALIVE_EVENTID,
+    /*Thermal Management event*/
+    WMI_THERMAL_MGMT_EVENTID,
+
+    /* Container for DIAG event and log data */
+    WMI_DIAG_DATA_CONTAINER_EVENTID,
+
+    /* host auto shutdown event */
+    WMI_HOST_AUTO_SHUTDOWN_EVENTID,
+
+	/*update mib counters together with WMI_UPDATE_STATS_EVENTID*/
+    WMI_UPDATE_WHAL_MIB_STATS_EVENTID,
+
+    /*update ht/vht info based on vdev (rx and tx NSS and preamble)*/
+    WMI_UPDATE_VDEV_RATE_STATS_EVENTID,
+
+    WMI_DIAG_EVENTID,
+
+    /** Set OCB Sched Response, deprecated */
+    WMI_OCB_SET_SCHED_EVENTID,
+
+    /** event to indicate the flush of the buffered debug messages is complete*/
+    WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID,
+
+    /** event to report mix/max RSSI breach events */
+    WMI_RSSI_BREACH_EVENTID,
+
+    /** event to report completion of data storage into flash memory */
+    WMI_TRANSFER_DATA_TO_FLASH_COMPLETE_EVENTID,
+
+    /** event to report SCPC calibrated data to host */
+    WMI_PDEV_UTF_SCPC_EVENTID,
+
+    /** event to provide requested data from the target's flash memory */
+    WMI_READ_DATA_FROM_FLASH_EVENTID,
+
+    /* GPIO Event */
+    WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
+    /** upload H_CV info WMI event
+     * to indicate uploaded H_CV info to host
+     */
+    WMI_UPLOADH_EVENTID,
+
+    /** capture H info WMI event
+     * to indicate captured H info to host
+     */
+    WMI_CAPTUREH_EVENTID,
+    /* hw RFkill */
+    WMI_RFKILL_STATE_CHANGE_EVENTID,
+
+    /* TDLS Event */
+    WMI_TDLS_PEER_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_TDLS),
+
+    /** STA SMPS Event */
+    /** force SMPS mode */
+    WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_STA_SMPS),
+
+    /*location scan event*/
+    /*report the firmware's capability of batch scan*/
+    WMI_BATCH_SCAN_ENABLED_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_LOCATION_SCAN),
+    /*batch scan result*/
+    WMI_BATCH_SCAN_RESULT_EVENTID,
+    /* OEM Event */
+    WMI_OEM_CAPABILITY_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_OEM), /*DEPRECATED*/
+    WMI_OEM_MEASUREMENT_REPORT_EVENTID, /* DEPRECATED */
+    WMI_OEM_ERROR_REPORT_EVENTID, /* DEPRECATED */
+    WMI_OEM_RESPONSE_EVENTID,
+
+    /* NAN Event */
+    WMI_NAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_NAN),
+    WMI_NAN_DISC_IFACE_CREATED_EVENTID,
+    WMI_NAN_DISC_IFACE_DELETED_EVENTID,
+    WMI_NAN_STARTED_CLUSTER_EVENTID,
+    WMI_NAN_JOINED_CLUSTER_EVENTID,
+
+    /* Coex Event */
+    WMI_COEX_REPORT_ANTENNA_ISOLATION_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_COEX),
+
+    /* LPI Event */
+    WMI_LPI_RESULT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_LPI),
+    WMI_LPI_STATUS_EVENTID,
+    WMI_LPI_HANDOFF_EVENTID,
+
+    /* ExtScan events */
+    WMI_EXTSCAN_START_STOP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_EXTSCAN),
+    WMI_EXTSCAN_OPERATION_EVENTID,
+    WMI_EXTSCAN_TABLE_USAGE_EVENTID,
+    WMI_EXTSCAN_CACHED_RESULTS_EVENTID,
+    WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID,
+    WMI_EXTSCAN_HOTLIST_MATCH_EVENTID,
+    WMI_EXTSCAN_CAPABILITIES_EVENTID,
+    WMI_EXTSCAN_HOTLIST_SSID_MATCH_EVENTID,
+
+    /* mDNS offload events */
+    WMI_MDNS_STATS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MDNS_OFL),
+
+    /* SAP Authentication offload events */
+    WMI_SAP_OFL_ADD_STA_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SAP_OFL),
+    WMI_SAP_OFL_DEL_STA_EVENTID,
+
+    /** Out-of-context-of-bss (OCB) events */
+    WMI_OCB_SET_CONFIG_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_OCB),
+    WMI_OCB_GET_TSF_TIMER_RESP_EVENTID,
+    WMI_DCC_GET_STATS_RESP_EVENTID,
+    WMI_DCC_UPDATE_NDL_RESP_EVENTID,
+    WMI_DCC_STATS_EVENTID,
+
+    /* System-On-Chip events */
+    WMI_SOC_SET_HW_MODE_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SOC),
+    WMI_SOC_HW_MODE_TRANSITION_EVENTID,
+    WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID,
+
+    /** Motion Aided WiFi Connectivity (MAWC) events */
+    WMI_MAWC_ENABLE_SENSOR_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MAWC),
+
+    /** pkt filter (BPF) offload relevant events */
+    WMI_BPF_CAPABILIY_INFO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BPF_OFFLOAD),
+    WMI_BPF_VDEV_STATS_INFO_EVENTID,
+
+
+    /* RMC specific event */
+    /* RMC manual leader selected event */
+    WMI_RMC_NEW_LEADER_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RMC),
+
+
+    /** Events in Prototyping phase */
+    WMI_NDI_CAP_RSP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PROTOTYPE),
+    WMI_NDP_INITIATOR_RSP_EVENTID,
+    WMI_NDP_RESPONDER_RSP_EVENTID,
+    WMI_NDP_END_RSP_EVENTID,
+    WMI_NDP_INDICATION_EVENTID,
+    WMI_NDP_CONFIRM_EVENTID,
+    WMI_NDP_END_INDICATION_EVENTID,
+} WMI_EVT_ID;
+
+/* defines for OEM message sub-types */
+#define WMI_OEM_CAPABILITY_REQ     0x01
+#define WMI_OEM_CAPABILITY_RSP     0x02
+#define WMI_OEM_MEASUREMENT_REQ    0x03
+#define WMI_OEM_MEASUREMENT_RSP    0x04
+#define WMI_OEM_ERROR_REPORT_RSP   0x05
+#define WMI_OEM_NAN_MEAS_REQ       0x06
+#define WMI_OEM_NAN_MEAS_RSP       0x07
+#define WMI_OEM_NAN_PEER_INFO      0x08
+#define WMI_OEM_CONFIGURE_LCR      0x09
+#define WMI_OEM_CONFIGURE_LCI      0x0A
+
+
+#define WMI_CHAN_LIST_TAG                0x1
+#define WMI_SSID_LIST_TAG                0x2
+#define WMI_BSSID_LIST_TAG               0x3
+#define WMI_IE_TAG                       0x4
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel */
+    /** primary 20 MHz channel frequency in mhz */
+    A_UINT32 mhz;
+    /** Center frequency 1 in MHz*/
+    A_UINT32 band_center_freq1;
+    /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/
+    A_UINT32 band_center_freq2;
+    /** channel info described below */
+    A_UINT32 info;
+    /** contains min power, max power, reg power and reg class id.  */
+    A_UINT32 reg_info_1;
+    /** contains antennamax */
+    A_UINT32 reg_info_2;
+} wmi_channel;
+
+typedef enum {
+    WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
+    WMI_CHANNEL_CHANGE_CAUSE_CSA,
+} wmi_channel_change_cause;
+
+/** channel info consists of 6 bits of channel mode */
+
+#define WMI_SET_CHANNEL_MODE(pwmi_channel,val) do { \
+     (pwmi_channel)->info &= 0xffffffc0;            \
+     (pwmi_channel)->info |= (val);                 \
+     } while (0)
+
+#define WMI_GET_CHANNEL_MODE(pwmi_channel) ((pwmi_channel)->info & 0x0000003f)
+
+#define WMI_CHAN_FLAG_HT40_PLUS   6
+#define WMI_CHAN_FLAG_PASSIVE     7
+#define WMI_CHAN_ADHOC_ALLOWED    8
+#define WMI_CHAN_AP_DISABLED      9
+#define WMI_CHAN_FLAG_DFS         10
+#define WMI_CHAN_FLAG_ALLOW_HT    11  /* HT is allowed on this channel */
+#define WMI_CHAN_FLAG_ALLOW_VHT   12  /* VHT is allowed on this channel */
+#define WMI_CHANNEL_CHANGE_CAUSE_CSA 13 /*Indicate reason for channel switch */
+#define WMI_CHAN_FLAG_HALF_RATE     14  /* Indicates half rate channel */
+#define WMI_CHAN_FLAG_QUARTER_RATE  15  /* Indicates quarter rate channel */
+#define WMI_CHAN_FLAG_DFS_CFREQ2  16 /* Enable radar event reporting for sec80 in VHT80p80 */
+#define WMI_CHAN_FLAG_ALLOW_HE    17 /* HE (11ax) is allowed on this channel */
+
+#define WMI_SET_CHANNEL_FLAG(pwmi_channel,flag) do { \
+        (pwmi_channel)->info |=  (1 << flag);      \
+     } while (0)
+
+#define WMI_GET_CHANNEL_FLAG(pwmi_channel,flag)   \
+        (((pwmi_channel)->info & (1 << flag)) >> flag)
+
+#define WMI_SET_CHANNEL_MIN_POWER(pwmi_channel,val) do { \
+     (pwmi_channel)->reg_info_1 &= 0xffffff00;           \
+     (pwmi_channel)->reg_info_1 |= (val & 0xff);         \
+     } while (0)
+#define WMI_GET_CHANNEL_MIN_POWER(pwmi_channel) ((pwmi_channel)->reg_info_1 & 0xff)
+
+#define WMI_SET_CHANNEL_MAX_POWER(pwmi_channel,val) do { \
+     (pwmi_channel)->reg_info_1 &= 0xffff00ff;           \
+     (pwmi_channel)->reg_info_1 |= ((val & 0xff) << 8);  \
+     } while (0)
+#define WMI_GET_CHANNEL_MAX_POWER(pwmi_channel) ((((pwmi_channel)->reg_info_1) >> 8) & 0xff)
+
+#define WMI_SET_CHANNEL_REG_POWER(pwmi_channel,val) do { \
+     (pwmi_channel)->reg_info_1 &= 0xff00ffff;           \
+     (pwmi_channel)->reg_info_1 |= ((val & 0xff) << 16); \
+     } while (0)
+#define WMI_GET_CHANNEL_REG_POWER(pwmi_channel) ((((pwmi_channel)->reg_info_1) >> 16) & 0xff)
+#define WMI_SET_CHANNEL_REG_CLASSID(pwmi_channel,val) do { \
+     (pwmi_channel)->reg_info_1 &= 0x00ffffff;             \
+     (pwmi_channel)->reg_info_1 |= ((val & 0xff) << 24);   \
+     } while (0)
+#define WMI_GET_CHANNEL_REG_CLASSID(pwmi_channel) ((((pwmi_channel)->reg_info_1) >> 24) & 0xff)
+
+#define WMI_SET_CHANNEL_ANTENNA_MAX(pwmi_channel,val) do { \
+     (pwmi_channel)->reg_info_2 &= 0xffffff00;             \
+     (pwmi_channel)->reg_info_2 |= (val & 0xff);           \
+     } while (0)
+#define WMI_GET_CHANNEL_ANTENNA_MAX(pwmi_channel) ((pwmi_channel)->reg_info_2 & 0xff)
+
+/* max tx power is in 1 dBm units */
+#define WMI_SET_CHANNEL_MAX_TX_POWER(pwmi_channel,val) do { \
+     (pwmi_channel)->reg_info_2 &= 0xffff00ff;              \
+     (pwmi_channel)->reg_info_2 |= ((val & 0xff) << 8);     \
+     } while (0)
+#define WMI_GET_CHANNEL_MAX_TX_POWER(pwmi_channel) ((((pwmi_channel)->reg_info_2)>>8) & 0xff)
+
+
+/** HT Capabilities*/
+#define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
+#define WMI_HT_CAP_HT20_SGI               0x0002   /* Short Guard Interval with HT20 */
+#define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
+#define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
+#define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
+#define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
+#define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
+#define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
+#define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
+#define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
+#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
+#define WMI_HT_CAP_HT40_SGI               0x0800
+#define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */
+#define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */
+
+
+/* These macros should be used when we wish to advertise STBC support for
+ * only 1SS or 2SS or 3SS. */
+#define WMI_HT_CAP_RX_STBC_1SS            0x0010   /* B4-B5 RX STBC */
+#define WMI_HT_CAP_RX_STBC_2SS            0x0020   /* B4-B5 RX STBC */
+#define WMI_HT_CAP_RX_STBC_3SS            0x0030   /* B4-B5 RX STBC */
+
+
+#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
+                                WMI_HT_CAP_HT20_SGI      | \
+                                WMI_HT_CAP_HT40_SGI      | \
+                                WMI_HT_CAP_TX_STBC       | \
+                                WMI_HT_CAP_RX_STBC       | \
+                                WMI_HT_CAP_LDPC          | \
+                                WMI_HT_CAP_TX_LDPC       | \
+                                WMI_HT_CAP_RX_LDPC)
+
+/* WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
+ field. The fields not defined here are not supported, or reserved.
+ Do not change these masks and if you have to add new one follow the
+ bitmask as specified by 802.11ac draft.
+ */
+
+
+#define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
+#define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
+#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
+#define WMI_VHT_CAP_CH_WIDTH_160MHZ              0x00000004
+#define WMI_VHT_CAP_CH_WIDTH_80P80_160MHZ        0x00000008
+#define WMI_VHT_CAP_RX_LDPC                      0x00000010
+#define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
+#define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
+#define WMI_VHT_CAP_TX_STBC                      0x00000080
+#define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
+#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
+#define WMI_VHT_CAP_SU_BFORMER                   0x00000800
+#define WMI_VHT_CAP_SU_BFORMEE                   0x00001000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
+#define WMI_VHT_CAP_MU_BFORMER                   0x00080000
+#define WMI_VHT_CAP_MU_BFORMEE                   0x00100000
+#define WMI_VHT_CAP_TXOP_PS                      0x00200000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
+#define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
+#define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
+#define WMI_VHT_CAP_TX_LDPC                      0x40000000
+
+
+/* TEMPORARY:
+ * Preserve the incorrect old name as an alias for the correct new name
+ * until all references to the old name have been removed from all hosts
+ * and targets.
+ */
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT
+
+
+/* These macros should be used when we wish to advertise STBC support for
+ * only 1SS or 2SS or 3SS. */
+#define WMI_VHT_CAP_RX_STBC_1SS 0x00000100
+#define WMI_VHT_CAP_RX_STBC_2SS 0x00000200
+#define WMI_VHT_CAP_RX_STBC_3SS 0x00000300
+
+/* TEMPORARY:
+ * Preserve the incorrect old name as an alias for the correct new name
+ * until all references to the old name have been removed from all hosts
+ * and targets.
+ */
+#define WMI_vHT_CAP_RX_STBC_3SS WMI_VHT_CAP_RX_STBC_3SS
+
+#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  |      \
+                                 WMI_VHT_CAP_SGI_80MHZ           |      \
+                                 WMI_VHT_CAP_TX_STBC             |      \
+                                 WMI_VHT_CAP_RX_STBC_MASK        |      \
+                                 WMI_VHT_CAP_RX_LDPC             |      \
+                                 WMI_VHT_CAP_TX_LDPC             |      \
+                                 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   |      \
+                                 WMI_VHT_CAP_RX_FIXED_ANT        |      \
+                                 WMI_VHT_CAP_TX_FIXED_ANT)
+
+/* Interested readers refer to Rx/Tx MCS Map definition as defined in
+ 802.11ac
+ */
+#define WMI_VHT_MAX_MCS_4_SS_MASK(r,ss)      ((3 & (r)) << (((ss) - 1) << 1))
+#define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
+#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
+
+/** 11ax capabilities */
+#define WMI_HE_CAP_PPE_PRESENT            0x00000001
+#define WMI_HE_CAP_TWT_RESPONDER_SUPPORT  0x00000002
+#define WMI_HE_CAP_TWT_REQUESTER_SUPPORT  0x00000004
+#define WMI_HE_FRAG_SUPPORT_MASK          0x00000018
+#define WMI_HE_FRAG_SUPPORT_SHIFT         3
+
+/* fragmentation support field value */
+enum {
+    WMI_HE_FRAG_SUPPORT_LEVEL0, /* No Fragmentation support */
+    WMI_HE_FRAG_SUPPORT_LEVEL1, /* support for fragments within a VHT single MPDU, no support for fragments within AMPDU */
+    WMI_HE_FRAG_SUPPORT_LEVEL2, /* support for up to 1 fragment per MSDU within a single A-MPDU */
+    WMI_HE_FRAG_SUPPORT_LEVEL3, /* support for multiple fragments per MSDU within an A-MPDU */
+};
+
+/** NOTE: This defs cannot be changed in the future without breaking WMI compatibility */
+#define WMI_MAX_NUM_SS                    8
+#define WMI_MAX_NUM_RU                    4
+
+/*
+ * Figure 8 554ae: -PPE Threshold Info field format
+ * we pack PPET16 and PPT8 for four RU's in one element of array.
+ *
+ * ppet16_ppet8_ru3_ru0 array element 0 holds:
+ *     |  PPET8 | PPET16 | PPET8  | PPET16 | PPET8  | PPET16 | PPET8  | PPET16 |
+ *rsvd |NSS1,RU4|NSS1,RU4|NSS1,RU3|NSS1,RU3|NSS1,RU2|NSS1,RU2|NSS1,RU1|NSS1,RU1|
+ *31:23|  22:20 |  19:17 |  17:15 |  14:12 |  11:9  |   8:6  |   5:3  |   2:0  |
+ *
+ * ppet16_ppet8_ru3_ru0 array element 1 holds:
+ *     | PPET8  | PPET16 | PPET8  | PPET16 | PPET8  | PPET16 | PPET8  | PPET16 |
+ *rsvd |NSS2,RU4|NSS2,RU4|NSS2,RU3|NSS2,RU3|NSS2,RU2|NSS2,RU2|NSS2,RU1|NSS2,RU1|
+ *31:23|  22:20 |  19:17 |  17:15 |  14:12 |  11:9  |   8:6  |   5:3  |   2:0  |
+ *
+ * etc.
+ */
+
+/*
+ * Note that in these macros, "ru" is one-based, not zero-based, while
+ * nssm1 is zero-based.
+ */
+#define WMI_SET_PPET16(ppet16_ppet8_ru3_ru0, ppet, ru, nssm1) \
+    do { \
+        ppet16_ppet8_ru3_ru0[nssm1] &= ~(7 << (((ru-1) % 4) * 6)); \
+        ppet16_ppet8_ru3_ru0[nssm1] |= ((ppet & 7) << (((ru-1) % 4) * 6)); \
+    } while (0)
+
+#define WMI_GET_PPET16(ppet16_ppet8_ru3_ru0, ru, nssm1) \
+    ((ppet16_ppet8_ru3_ru0[nssm1] >> (((ru-1) % 4) * 6)) & 7)
+
+#define WMI_SET_PPET8(ppet16_ppet8_ru3_ru0, ppet, ru, nssm1) \
+    do { \
+        ppet16_ppet8_ru3_ru0[nssm1] &= ~(7 << (((ru-1) % 4) * 6 + 3)); \
+        ppet16_ppet8_ru3_ru0[nssm1] |= ((ppet&7) << (((ru-1) % 4) * 6 + 3)); \
+    } while (0)
+
+#define WMI_GET_PPET8(ppet16_ppet8_ru3_ru0, ru, nssm1) \
+    ((ppet16_ppet8_ru3_ru0[nssm1] >> (((ru-1) % 4) * 6 + 3)) & 7)
+
+typedef struct _wmi_ppe_threshold {
+    A_UINT32 numss_m1; /** NSS - 1*/
+    A_UINT32 ru_count; /** Max RU count */
+    A_UINT32 ppet16_ppet8_ru3_ru0[WMI_MAX_NUM_SS]; /** ppet8 and ppet16 for max num ss */
+} wmi_ppe_threshold;
+
+/* WMI_SYS_CAPS_* refer to the capabilities that system support
+ */
+#define WMI_SYS_CAP_ENABLE                       0x00000001
+#define WMI_SYS_CAP_TXPOWER                      0x00000002
+
+/*
+ * WMI Dual Band Simultaneous (DBS) hardware mode list bit-mask definitions.
+ * Bits 5:0 are reserved
+ */
+#define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS  (28)
+#define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS  (24)
+#define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS  (20)
+#define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS  (16)
+#define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS   (12)
+#define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS   (8)
+#define WMI_DBS_HW_MODE_DBS_MODE_BITPOS         (7)
+#define WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS   (6)
+
+#define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_MASK    (0xf << WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_MASK    (0xf << WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_MASK    (0xf << WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_MASK    (0xf << WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_MASK     (0xf << WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS)
+#define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_MASK     (0xf << WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS)
+#define WMI_DBS_HW_MODE_DBS_MODE_MASK           (0x1 << WMI_DBS_HW_MODE_DBS_MODE_BITPOS)
+#define WMI_DBS_HW_MODE_AGILE_DFS_MODE_MASK     (0x1 << WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS)
+
+#define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_SET(hw_mode, value) \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS, 4, value)
+#define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_SET(hw_mode, value) \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS, 4, value)
+#define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_SET(hw_mode, value) \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS, 4, value)
+#define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_SET(hw_mode, value) \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS, 4, value)
+#define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_SET(hw_mode, value)  \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS, 4, value)
+#define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_SET(hw_mode, value)  \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS, 4, value)
+#define WMI_DBS_HW_MODE_DBS_MODE_SET(hw_mode, value)        \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_DBS_MODE_BITPOS, 1, value)
+#define WMI_DBS_HW_MODE_AGILE_DFS_SET(hw_mode, value)       \
+    WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS, 1, value)
+
+#define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_GET(hw_mode)    \
+    ((hw_mode & WMI_DBS_HW_MODE_MAC0_TX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_GET(hw_mode)    \
+    ((hw_mode & WMI_DBS_HW_MODE_MAC0_RX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_GET(hw_mode)    \
+    ((hw_mode & WMI_DBS_HW_MODE_MAC1_TX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_GET(hw_mode)    \
+    ((hw_mode & WMI_DBS_HW_MODE_MAC1_RX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS)
+#define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_GET(hw_mode)     \
+    ((hw_mode & WMI_DBS_HW_MODE_MAC0_BANDWIDTH_MASK) >> WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS)
+#define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_GET(hw_mode)     \
+    ((hw_mode & WMI_DBS_HW_MODE_MAC1_BANDWIDTH_MASK) >> WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS)
+#define WMI_DBS_HW_MODE_DBS_MODE_GET(hw_mode)           \
+    ((hw_mode & WMI_DBS_HW_MODE_DBS_MODE_MASK) >> WMI_DBS_HW_MODE_DBS_MODE_BITPOS)
+#define WMI_DBS_HW_MODE_AGILE_DFS_GET(hw_mode)          \
+    ((hw_mode & WMI_DBS_HW_MODE_AGILE_DFS_MODE_MASK) >> WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS)
+
+#define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS    (31)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS   (30)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS  (29)
+
+#define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_MASK    (0x1 << WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_MASK   (0x1 << WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_MASK  (0x1 << WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS)
+
+#define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_SET(scan_cfg, value) \
+    WMI_SET_BITS(scan_cfg, WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS, 1, value)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_SET(scan_cfg, value) \
+    WMI_SET_BITS(scan_cfg, WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS, 1, value)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_SET(scan_cfg, value) \
+    WMI_SET_BITS(scan_cfg, WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS, 1, value)
+
+#define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_GET(scan_cfg)    \
+    ((scan_cfg & WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_MASK) >> WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_GET(scan_cfg)    \
+    ((scan_cfg & WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_MASK) >> WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS)
+#define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_GET(scan_cfg)    \
+    ((scan_cfg & WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_MASK) >> WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS)
+
+#define WMI_DBS_FW_MODE_CFG_DBS_BITPOS          (31)
+#define WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS    (30)
+
+#define WMI_DBS_FW_MODE_CFG_DBS_MASK          (0x1 << WMI_DBS_FW_MODE_CFG_DBS_BITPOS)
+#define WMI_DBS_FW_MODE_CFG_AGILE_DFS_MASK    (0x1 << WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS)
+
+#define WMI_DBS_FW_MODE_CFG_DBS_SET(fw_mode, value) \
+    WMI_SET_BITS(fw_mode, WMI_DBS_FW_MODE_CFG_DBS_BITPOS, 1, value)
+#define WMI_DBS_FW_MODE_CFG_AGILE_DFS_SET(fw_mode, value) \
+    WMI_SET_BITS(fw_mode, WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS, 1, value)
+
+#define WMI_DBS_FW_MODE_CFG_DBS_GET(fw_mode)    \
+    ((fw_mode & WMI_DBS_FW_MODE_CFG_DBS_MASK) >> WMI_DBS_FW_MODE_CFG_DBS_BITPOS)
+#define WMI_DBS_FW_MODE_CFG_AGILE_DFS_GET(fw_mode)    \
+    ((fw_mode & WMI_DBS_FW_MODE_CFG_AGILE_DFS_MASK) >> WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS)
+
+/** NOTE: This structure cannot be extended in the future without breaking WMI compatibility */
+typedef struct _wmi_abi_version {
+    A_UINT32 abi_version_0; /** WMI Major and Minor versions */
+    A_UINT32 abi_version_1; /** WMI change revision */
+    A_UINT32 abi_version_ns_0; /** ABI version namespace first four dwords */
+    A_UINT32 abi_version_ns_1; /** ABI version namespace second four dwords */
+    A_UINT32 abi_version_ns_2; /** ABI version namespace third four dwords */
+    A_UINT32 abi_version_ns_3; /** ABI version namespace fourth four dwords */
+} wmi_abi_version;
+
+/*
+ * maximum number of memroy requests allowed from FW.
+ */
+#define WMI_MAX_MEM_REQS 16
+
+/* !!NOTE!!:
+ * This HW_BD_INFO_SIZE cannot be changed without breaking compatibility.
+ * Please don't change it.
+ */
+#define HW_BD_INFO_SIZE       5
+
+/**
+ * PDEV ID to identify the physical device,
+ * value 0 reserved for SOC level commands/event
+ */
+#define WMI_PDEV_ID_SOC         0 /* SOC level, applicable to all PDEVs */
+#define WMI_PDEV_ID_1ST         1 /* first pdev  (pdev 0) */
+#define WMI_PDEV_ID_2ND         2 /* second pdev (pdev 1) */
+#define WMI_PDEV_ID_3RD         3 /* third pdev  (pdev 2) */
+
+/**
+ * The following struct holds optional payload for
+ * wmi_service_ready_event_fixed_param,e.g., 11ac pass some of the
+ * device capability to the host.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_SERVICE_READY_EVENT */
+    A_UINT32 fw_build_vers; /* firmware build number */
+    wmi_abi_version fw_abi_vers;
+    A_UINT32 phy_capability; /* WMI_PHY_CAPABILITY */
+    A_UINT32 max_frag_entry; /* Maximum number of frag table entries that SW will populate less 1 */
+    A_UINT32 num_rf_chains;
+    /* The following field is only valid for service type WMI_SERVICE_11AC */
+    A_UINT32 ht_cap_info; /* WMI HT Capability */
+    A_UINT32 vht_cap_info; /* VHT capability info field of 802.11ac */
+    A_UINT32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
+    A_UINT32 hw_min_tx_power;
+    A_UINT32 hw_max_tx_power;
+    A_UINT32 sys_cap_info;
+    A_UINT32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
+    /** Max beacon and Probe Response IE offload size (includes
+     *  optional P2P IEs) */
+    A_UINT32 max_bcn_ie_size;
+    /*
+     * request to host to allocate a chuck of memory and pss it down to FW via WM_INIT.
+     * FW uses this as FW extesnsion memory for saving its data structures. Only valid
+     * for low latency interfaces like PCIE where FW can access this memory directly (or)
+     * by DMA.
+     */
+    A_UINT32 num_mem_reqs;
+    /* Max No. scan channels target can support
+     * If FW is too old and doesn't indicate this number, host side value will default to
+     * 0, and host will take the original compatible value (62) for future scan channel
+     * setup.
+     */
+    A_UINT32 max_num_scan_channels;
+
+    /* Hardware board specific ID. Values defined in enum WMI_HWBOARD_ID.
+     * Default 0 means tha hw_bd_info[] is invalid(legacy board).
+     */
+    A_UINT32 hw_bd_id;
+    A_UINT32 hw_bd_info[HW_BD_INFO_SIZE]; /* Board specific information. Invalid if hw_hd_id is zero. */
+
+    /*
+     * Number of MACs supported, i.e. a DBS-capable device will return 2
+     */
+    A_UINT32 max_supported_macs;
+
+    /*
+     * FW sub-feature capabilities to be used in concurrence with wmi_service_bitmap
+     */
+    A_UINT32 wmi_fw_sub_feat_caps; /* values from enum WMI_FW_SUB_FEAT_CAPS */
+
+    /*
+     * Number of Dual Band Simultaneous (DBS) hardware modes
+     */
+    A_UINT32 num_dbs_hw_modes;
+
+    /*
+     * txrx_chainmask
+     *    [7:0]   - 2G band tx chain mask
+     *    [15:8]  - 2G band rx chain mask
+     *    [23:16] - 5G band tx chain mask
+     *    [31:24] - 5G band rx chain mask
+     *
+     */
+    A_UINT32 txrx_chainmask;
+
+    /*
+     * default Dual Band Simultaneous (DBS) hardware mode
+     */
+    A_UINT32 default_dbs_hw_mode_index;
+
+    /*
+     * Number of msdu descriptors target would use
+     */
+    A_UINT32 num_msdu_desc;
+
+/* The TLVs for hal_reg_capabilities, wmi_service_bitmap and mem_reqs[] will follow this TLV.
+ *     HAL_REG_CAPABILITIES   hal_reg_capabilities;
+ *     A_UINT32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE];
+ *     wlan_host_mem_req mem_reqs[];
+ *     wlan_dbs_hw_mode_list[];
+ */
+} wmi_service_ready_event_fixed_param;
+
+#define WMI_SERVICE_SEGMENT_BM_SIZE32 4 /* 4x A_UINT32 = 128 bits */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_service_available_event_fixed_param */
+    /*
+     * The wmi_service_segment offset field specifies the position within the
+     * logical bitmap of WMI service flags at which the WMI service flags
+     * specified within this message begin.
+     * Since the first 128 WMI service flags are specified within the
+     * wmi_service_bitmap field of the WMI_SERVICE_READY_EVENT message,
+     * the wmi_service_segment_offset value is expected to be 128 or more.
+     */
+    A_UINT32 wmi_service_segment_offset;
+    A_UINT32 wmi_service_segment_bitmap[WMI_SERVICE_SEGMENT_BM_SIZE32];
+} wmi_service_available_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_SERVICE_EXT_READY_EVENT */
+    /* which WMI_DBS_CONC_SCAN_CFG setting the FW is initialized with */
+    A_UINT32 default_conc_scan_config_bits;
+    /* which WMI_DBS_FW_MODE_CFG setting the FW is initialized with */
+    A_UINT32 default_fw_config_bits;
+    wmi_ppe_threshold ppet;
+    A_UINT32 he_cap_info; /* see section 8.4.2.213 from draft r8 of 802.11ax; see WMI_HE_FRAG_SUPPORT enum */
+    /*
+     * An HT STA shall not allow transmission of more than one MPDU start
+     * within the time limit described in the MPDU maximum density field.
+     */
+    A_UINT32 mpdu_density; /* units are microseconds */
+    /*
+     * Maximum no of BSSID based RX filters host can program
+     * Value 0 means FW hasn't given any limit to host.
+     */
+    A_UINT32 max_bssid_rx_filters;
+} wmi_service_ready_ext_event_fixed_param;
+
+typedef enum {
+    WMI_FW_STA_RTT_INITR =     0x00000001,
+    WMI_FW_STA_RTT_RESPR =     0x00000002,
+    WMI_FW_P2P_CLI_RTT_INITR = 0x00000004,
+    WMI_FW_P2P_CLI_RTT_RESPR = 0x00000008,
+    WMI_FW_P2P_GO_RTT_INITR =  0x00000010,
+    WMI_FW_P2P_GO_RTT_RESPR =  0x00000020,
+    WMI_FW_AP_RTT_INITR =      0x00000040,
+    WMI_FW_AP_RTT_RESPR =      0x00000080,
+    WMI_FW_NAN_RTT_INITR =     0x00000100,
+    WMI_FW_NAN_RTT_RESPR =     0x00000200,
+    /*
+     * New fw sub feature capabilites before
+     * WMI_FW_MAX_SUB_FEAT_CAP
+     */
+    WMI_FW_MAX_SUB_FEAT_CAP =  0x80000000,
+} WMI_FW_SUB_FEAT_CAPS;
+
+typedef enum {
+    WMI_HWBD_NONE       = 0,            /* No hw board information is given */
+    WMI_HWBD_QCA6174    = 1,            /* Rome(AR6320) */
+    WMI_HWBD_QCA2582    = 2,            /* Killer 1525*/
+} WMI_HWBD_ID;
+
+#define ATH_BD_DATA_REV_MASK            0x000000FF
+#define ATH_BD_DATA_REV_SHIFT           0
+
+#define ATH_BD_DATA_PROJ_ID_MASK        0x0000FF00
+#define ATH_BD_DATA_PROJ_ID_SHIFT       8
+
+#define ATH_BD_DATA_CUST_ID_MASK        0x00FF0000
+#define ATH_BD_DATA_CUST_ID_SHIFT       16
+
+#define ATH_BD_DATA_REF_DESIGN_ID_MASK  0xFF000000
+#define ATH_BD_DATA_REF_DESIGN_ID_SHIFT 24
+
+#define SET_BD_DATA_REV(bd_data_ver, value)     \
+    ((bd_data_ver) &= ~ATH_BD_DATA_REV_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_REV_SHIFT))
+
+#define GET_BD_DATA_REV(bd_data_ver)            \
+    (((bd_data_ver) & ATH_BD_DATA_REV_MASK) >> ATH_BD_DATA_REV_SHIFT)
+
+#define SET_BD_DATA_PROJ_ID(bd_data_ver, value) \
+    ((bd_data_ver) &= ~ATH_BD_DATA_PROJ_ID_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_PROJ_ID_SHIFT))
+
+#define GET_BD_DATA_PROJ_ID(bd_data_ver)        \
+    (((bd_data_ver) & ATH_BD_DATA_PROJ_ID_MASK) >> ATH_BD_DATA_PROJ_ID_SHIFT)
+
+#define SET_BD_DATA_CUST_ID(bd_data_ver, value) \
+    ((bd_data_ver) &= ~ATH_BD_DATA_CUST_ID_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_CUST_ID_SHIFT))
+
+#define GET_BD_DATA_CUST_ID(bd_data_ver)        \
+    (((bd_data_ver) & ATH_BD_DATA_CUST_ID_MASK) >> ATH_BD_DATA_CUST_ID_SHIFT)
+
+#define SET_BD_DATA_REF_DESIGN_ID(bd_data_ver, value)   \
+    ((bd_data_ver) &= ~ATH_BD_DATA_REF_DESIGN_ID_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_REF_DESIGN_ID_SHIFT))
+
+#define GET_BD_DATA_REF_DESIGN_ID(bd_data_ver)          \
+    (((bd_data_ver) & ATH_BD_DATA_REF_DESIGN_ID_MASK) >> ATH_BD_DATA_REF_DESIGN_ID_SHIFT)
+
+
+#ifdef ROME_LTE_COEX_FREQ_AVOID
+typedef struct {
+    A_UINT32 start_freq; /* start frequency, not channel center freq */
+    A_UINT32 end_freq; /* end frequency */
+} avoid_freq_range_desc;
+
+typedef struct {
+    /* bad channel range count, multi range is allowed, 0 means all channel clear */
+    A_UINT32 num_freq_ranges;
+    /* multi range with num_freq_ranges, LTE advance multi carrier, CDMA,etc */
+    avoid_freq_range_desc avd_freq_range[0];
+} wmi_wlan_avoid_freq_ranges_event;
+#endif
+
+/** status consists of  upper 16 bits fo A_STATUS status and lower 16 bits of module ID that retuned status */
+#define WLAN_INIT_STATUS_SUCCESS   0x0
+#define WLAN_INIT_STATUS_GEN_FAILED   0x1
+#define WLAN_GET_INIT_STATUS_REASON(status)    ((status) & 0xffff)
+#define WLAN_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff)
+
+typedef A_UINT32 WLAN_INIT_STATUS;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ready_event_fixed_param */
+    wmi_abi_version fw_abi_vers;
+    wmi_mac_addr mac_addr;
+    A_UINT32 status;
+    A_UINT32 num_dscp_table;
+} wmi_ready_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resource_config */
+    /**
+     * @brief num_vdev - number of virtual devices (VAPs) to support
+     */
+    A_UINT32 num_vdevs;
+    /**
+     * @brief num_peers - number of peer nodes to support
+     */
+    A_UINT32 num_peers;
+    /*
+     * @brief In offload mode target supports features like WOW, chatter and other
+     * protocol offloads. In order to support them some functionalities like
+     * reorder buffering, PN checking need to be done in target. This determines
+     * maximum number of peers suported by target in offload mode
+     */
+    A_UINT32 num_offload_peers;
+    /* @brief Number of reorder buffers available for doing target based reorder
+     * Rx reorder buffering
+     */
+    A_UINT32 num_offload_reorder_buffs;
+    /**
+     * @brief num_peer_keys - number of keys per peer
+     */
+    A_UINT32 num_peer_keys;
+    /**
+     * @brief num_peer_tids - number of TIDs to provide storage for per peer.
+     */
+    A_UINT32 num_tids;
+    /**
+     * @brief ast_skid_limit - max skid for resolving hash collisions
+     * @details
+     *     The address search table is sparse, so that if two MAC addresses
+     *     result in the same hash value, the second of these conflicting
+     *     entries can slide to the next index in the address search table,
+     *     and use it, if it is unoccupied.  This ast_skid_limit parameter
+     *     specifies the upper bound on how many subsequent indices to search
+     *     over to find an unoccupied space.
+     */
+    A_UINT32 ast_skid_limit;
+    /**
+     * @brief tx_chain_mask - the nominal chain mask for transmit
+     * @details
+     *     The chain mask may be modified dynamically, e.g. to operate AP tx with
+     *     a reduced number of chains if no clients are associated.
+     *     This configuration parameter specifies the nominal chain-mask that
+     *     should be used when not operating with a reduced set of tx chains.
+     */
+    A_UINT32 tx_chain_mask;
+    /**
+     * @brief rx_chain_mask - the nominal chain mask for receive
+     * @details
+     *     The chain mask may be modified dynamically, e.g. for a client to use
+     *     a reduced number of chains for receive if the traffic to the client
+     *     is low enough that it doesn't require downlink MIMO or antenna
+     *     diversity.
+     *     This configuration parameter specifies the nominal chain-mask that
+     *     should be used when not operating with a reduced set of rx chains.
+     */
+    A_UINT32 rx_chain_mask;
+    /**
+     * @brief rx_timeout_pri - what rx reorder timeout (ms) to use for the AC
+     * @details
+     *     Each WMM access class (voice, video, best-effort, background) will
+     *     have its own timeout value to dictate how long to wait for missing
+     *     rx MPDUs to arrive before flushing subsequent MPDUs that have already
+     *     been received.
+     *     This parameter specifies the timeout in milliseconds for each class .
+     *     NOTE: the number of class (defined as 4) cannot be
+     *     changed in the future without breaking WMI compatibility.
+     */
+    A_UINT32 rx_timeout_pri[4];
+    /**
+     * @brief rx_decap mode - what mode the rx should decap packets to
+     * @details
+     *     MAC can decap to RAW (no decap), native wifi or Ethernet types
+     *     THis setting also determines the default TX behavior, however TX
+     *     behavior can be modified on a per VAP basis during VAP init
+     */
+    A_UINT32 rx_decap_mode;
+    /**
+     * @brief  scan_max_pending_req - what is the maximum scan requests than can be queued
+     */
+    A_UINT32 scan_max_pending_req;
+
+    /**
+     * @brief maximum VDEV that could use BMISS offload
+     */
+    A_UINT32 bmiss_offload_max_vdev;
+
+    /**
+     * @brief maximum VDEV that could use offload roaming
+     */
+    A_UINT32 roam_offload_max_vdev;
+
+    /**
+     * @brief maximum AP profiles that would push to offload roaming
+     */
+    A_UINT32 roam_offload_max_ap_profiles;
+
+    /**
+     * @brief num_mcast_groups - how many groups to use for mcast->ucast conversion
+     * @details
+     *     The target's WAL maintains a table to hold information regarding which
+     *     peers belong to a given multicast group, so that if multicast->unicast
+     *     conversion is enabled, the target can convert multicast tx frames to a
+     *     series of unicast tx frames, to each peer within the multicast group.
+     *     This num_mcast_groups configuration parameter tells the target how
+     *     many multicast groups to provide storage for within its multicast
+     *     group membership table.
+     */
+    A_UINT32 num_mcast_groups;
+
+    /**
+     * @brief num_mcast_table_elems - size to alloc for the mcast membership table
+     * @details
+     *     This num_mcast_table_elems configuration parameter tells the target
+     *     how many peer elements it needs to provide storage for in its
+     *     multicast group membership table.
+     *     These multicast group membership table elements are shared by the
+     *     multicast groups stored within the table.
+     */
+    A_UINT32 num_mcast_table_elems;
+
+    /**
+     * @brief mcast2ucast_mode - whether/how to do multicast->unicast conversion
+     * @details
+     *     This configuration parameter specifies whether the target should
+     *     perform multicast --> unicast conversion on transmit, and if so,
+     *     what to do if it finds no entries in its multicast group membership
+     *     table for the multicast IP address in the tx frame.
+     *     Configuration value:
+     *     0 -> Do not perform multicast to unicast conversion.
+     *     1 -> Convert multicast frames to unicast, if the IP multicast address
+     *          from the tx frame is found in the multicast group membership
+     *          table.  If the IP multicast address is not found, drop the frame.
+     *     2 -> Convert multicast frames to unicast, if the IP multicast address
+     *          from the tx frame is found in the multicast group membership
+     *          table.  If the IP multicast address is not found, transmit the
+     *          frame as multicast.
+     */
+    A_UINT32 mcast2ucast_mode;
+
+
+    /**
+     * @brief tx_dbg_log_size - how much memory to allocate for a tx PPDU dbg log
+     * @details
+     *     This parameter controls how much memory the target will allocate to
+     *     store a log of tx PPDU meta-information (how large the PPDU was,
+     *     when it was sent, whether it was successful, etc.)
+     */
+    A_UINT32 tx_dbg_log_size;
+
+    /**
+     * @brief num_wds_entries - how many AST entries to be allocated for WDS
+     */
+    A_UINT32 num_wds_entries;
+
+    /**
+     * @brief dma_burst_size - MAC DMA burst size, e.g., on Peregrine on PCI
+     * this limit can be 0 -default, 1 256B
+     */
+    A_UINT32 dma_burst_size;
+
+    /**
+     * @brief mac_aggr_delim - Fixed delimiters to be inserted after every MPDU
+     * to account for interface latency to avoid underrun.
+     */
+    A_UINT32 mac_aggr_delim;
+    /**
+     * @brief rx_skip_defrag_timeout_dup_detection_check
+     * @details
+     *  determine whether target is responsible for detecting duplicate
+     *  non-aggregate MPDU and timing out stale fragments.
+     *
+     *  A-MPDU reordering is always performed on the target.
+     *
+     *  0: target responsible for frag timeout and dup checking
+     *  1: host responsible for frag timeout and dup checking
+     */
+    A_UINT32 rx_skip_defrag_timeout_dup_detection_check;
+
+    /**
+     * @brief vow_config - Configuration for VoW : No of Video Nodes to be supported
+     * and Max no of descriptors for each Video link (node).
+     */
+    A_UINT32 vow_config;
+
+    /**
+     * @brief maximum VDEV that could use GTK offload
+     */
+    A_UINT32 gtk_offload_max_vdev;
+
+    /**
+     * @brief num_msdu_desc - Number of msdu descriptors target should use
+     */
+    A_UINT32 num_msdu_desc; /* Number of msdu desc */
+    /**
+     * @brief max_frag_entry - Max. number of Tx fragments per MSDU
+     * @details
+     *     This parameter controls the max number of Tx fragments per MSDU.
+     *     This is sent by the target as part of the WMI_SERVICE_READY event
+     *     and is overriden by the OS shim as required.
+     */
+    A_UINT32 max_frag_entries;
+
+    /**
+     * @brief num_tdls_vdevs - Max. number of vdevs that can support TDLS
+     * @brief num_msdu_desc - Number of vdev that can support beacon offload
+     */
+
+    A_UINT32 num_tdls_vdevs; /* number of vdevs allowed to do tdls */
+
+    /**
+     * @brief num_tdls_conn_table_entries - Number of peers tracked by tdls vdev
+     * @details
+     *      Each TDLS enabled vdev can track outgoing transmits/rssi/rates to/of
+     *      peers in a connection tracking table for possible TDLS link creation
+     *      or deletion. This controls the number of tracked peers per vdev.
+     */
+    A_UINT32  num_tdls_conn_table_entries; /* number of peers to track per TDLS vdev */
+     A_UINT32 beacon_tx_offload_max_vdev;
+     A_UINT32 num_multicast_filter_entries;
+     A_UINT32 num_wow_filters; /*host can configure the number of wow filters*/
+
+     /**
+     * @brief num_keep_alive_pattern - Num of keep alive patterns configured
+     * from host.
+     */
+     A_UINT32 num_keep_alive_pattern;
+    /**
+     * @brief keep_alive_pattern_size - keep alive pattern size.
+     */
+     A_UINT32 keep_alive_pattern_size;
+    /**
+     * @brief max_tdls_concurrent_sleep_sta - Number of tdls sleep sta supported
+     * @details
+     *      Each TDLS STA can become a sleep STA independently. This parameter
+     *      mentions how many such sleep STAs can be supported concurrently.
+     */
+    A_UINT32 max_tdls_concurrent_sleep_sta;
+
+    /**
+     * @brief max_tdls_concurrent_buffer_sta - Number of tdls buffer sta supported
+     * @details
+     *      Each TDLS STA can become a buffer STA independently. This parameter
+     *      mentions how many such buffer STAs can be supported concurrently.
+     */
+    A_UINT32 max_tdls_concurrent_buffer_sta;
+
+    /**
+     * @brief wmi_send_separate - host configures fw to send the wmi separately
+     */
+    A_UINT32 wmi_send_separate;
+
+    /**
+     * @brief num_ocb_vdevs - Number of vdevs used for OCB support
+     */
+    A_UINT32 num_ocb_vdevs;
+
+    /**
+     * @brief num_ocb_channels - The supported number of simultaneous OCB channels
+     */
+    A_UINT32 num_ocb_channels;
+
+    /**
+     * @brief num_ocb_schedules - The supported number of OCB schedule segments
+     */
+    A_UINT32 num_ocb_schedules;
+
+    /**
+     * @brief specific configuration from host, such as per platform configuration
+     */
+    #define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_S 0
+    #define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_M 0x1
+
+    #define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_S 1
+    #define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_M 0x2
+
+    #define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_S 2
+    #define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_M 0x4
+
+    #define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_S 3
+    #define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_M 0x8
+
+    #define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_S 4
+    #define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_M 0x10
+
+    #define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_S 5
+    #define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_M 0x20
+
+    #define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_S 6
+    #define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_M 0x40
+
+    #define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_S 7
+    #define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_M 0x80
+
+    #define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_S 8
+    #define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_M 0x100
+
+    #define WMI_RSRC_CFG_FLAG_MGMT_COMP_EVT_BUNDLE_SUPPORT_S 9
+    #define WMI_RSRC_CFG_FLAG_MGMT_COMP_EVT_BUNDLE_SUPPORT_M 0x200
+
+    A_UINT32 flag1;
+
+    /** @brief smart_ant_cap - Smart Antenna capabilities information
+     * @details
+     *        1 - Smart antenna is enabled.
+     *        0 - Smart antenna is disabled.
+     * In future this can contain smart antenna specifc capabilities.
+     */
+    A_UINT32 smart_ant_cap;
+
+    /**
+     * User can configure the buffers allocated for each AC (BE, BK, VI, VO)
+     * during init
+     */
+    A_UINT32 BK_Minfree;
+    A_UINT32 BE_Minfree;
+    A_UINT32 VI_Minfree;
+    A_UINT32 VO_Minfree;
+
+    /**
+     * @brief alloc_frag_desc_for_data_pkt . Controls data packet fragment
+     * descriptor memory allocation.
+     *   1 - Allocate fragment descriptor memory for data packet in firmware.
+     *       If host wants to transmit data packet at its desired rate,
+     *       this field must be set.
+     *   0 - Don't allocate fragment descriptor for data packet.
+     */
+    A_UINT32 alloc_frag_desc_for_data_pkt;
+
+    /** how much space to allocate for NDP NS (neighbor solicitation) specs */
+    A_UINT32 num_ns_ext_tuples_cfg;
+
+    /**
+     * size (in bytes) of the buffer the FW shall allocate to store
+     * packet filtering instructions
+     */
+    A_UINT32 bpf_instruction_size;
+
+    /**
+     * Maximum no of BSSID based RX filters host would program
+     * Value 0 means host doesn't given any limit to FW.
+     */
+    A_UINT32 max_bssid_rx_filters;
+    /**
+     * Use PDEV ID instead of MAC ID, added for backward compatibility with older host
+     * which is using MAC ID. 1 means PDEV ID, 0 means MAC ID.
+     */
+    A_UINT32 use_pdev_id;
+} wmi_resource_config;
+
+#define WMI_RSRC_CFG_FLAG_SET(word32, flag, value) \
+    do { \
+        (word32) &= ~WMI_RSRC_CFG_FLAG_ ## flag ## _M; \
+        (word32) |= ((value) << WMI_RSRC_CFG_FLAG_ ## flag ## _S) & \
+            WMI_RSRC_CFG_FLAG_ ## flag ## _M; \
+    } while (0)
+#define WMI_RSRC_CFG_FLAG_GET(word32, flag) \
+    (((word32) & WMI_RSRC_CFG_FLAG_ ## flag ## _M) >> \
+    WMI_RSRC_CFG_FLAG_ ## flag ## _S)
+
+#define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), WOW_IGN_PCIE_RST, (value))
+#define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), WOW_IGN_PCIE_RST)
+
+#define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), LTEU_SUPPORT, (value))
+#define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), LTEU_SUPPORT)
+
+#define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), COEX_GPIO_SUPPORT, (value))
+#define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), COEX_GPIO_SUPPORT)
+
+#define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), AUX_RADIO_SPECTRAL_INTF, (value))
+#define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), AUX_RADIO_SPECTRAL_INTF)
+
+#define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), AUX_RADIO_CHAN_LOAD_INTF, (value))
+#define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), AUX_RADIO_CHAN_LOAD_INTF)
+
+#define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), BSS_CHANNEL_INFO_64, (value))
+#define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), BSS_CHANNEL_INFO_64)
+
+#define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), ATF_CONFIG_ENABLE, (value))
+#define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), ATF_CONFIG_ENABLE)
+
+#define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), IPHR_PAD_CONFIG_ENABLE, (value))
+#define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), IPHR_PAD_CONFIG_ENABLE)
+
+#define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), QWRAP_MODE_ENABLE, (value))
+#define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), QWRAP_MODE_ENABLE)
+
+#define WMI_RSRC_CFG_FLAG_MGMT_COMP_EVT_BUNDLE_SUPPORT_SET(word32, value) \
+    WMI_RSRC_CFG_FLAG_SET((word32), MGMT_COMP_EVT_BUNDLE_SUPPORT, (value))
+#define WMI_RSRC_CFG_FLAG_MGMT_COMP_EVT_BUNDLE_SUPPORT_GET(word32) \
+    WMI_RSRC_CFG_FLAG_GET((word32), MGMT_COMP_EVT_BUNDLE_SUPPORT)
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_init_cmd_fixed_param */
+
+    /** The following indicate the WMI versions to be supported by
+     *  the host driver. Note that the host driver decide to
+     *  "downgrade" its WMI version support and this may not be the
+     *  native version of the host driver. */
+    wmi_abi_version host_abi_vers;
+
+    A_UINT32 num_host_mem_chunks; /** size of array host_mem_chunks[] */
+/* The TLVs for resource_config, host_mem_chunks[], and hw_mode_config will follow.
+ *     wmi_resource_config   resource_config;
+ *     wlan_host_memory_chunk host_mem_chunks[];
+ *     wmi_pdev_set_hw_mode_cmd_fixed_param hw_mode_config;
+ *         Note that the hw_mode_config, in spite of its "pdev" name,
+ *         applies to the entire target rather than for a single pdev
+ *         within the target.
+ *         To avoid specifying a HW mode for the target, the host should
+ *         fill hw_mode_config's fields with 0x0.
+ */
+
+} wmi_init_cmd_fixed_param;
+
+/**
+ * TLV for channel list
+ */
+typedef struct {
+    /** WMI_CHAN_LIST_TAG */
+    A_UINT32 tag;
+    /** # of channels to scan */
+    A_UINT32 num_chan;
+    /** channels in Mhz */
+    A_UINT32 channel_list[1];
+} wmi_chan_list;
+
+/**
+ * TLV for bssid list
+ */
+typedef struct {
+    /** WMI_BSSID_LIST_TAG */
+    A_UINT32 tag;
+    /** number of bssids   */
+    A_UINT32 num_bssid;
+    /** bssid list         */
+    wmi_mac_addr bssid_list[1];
+} wmi_bssid_list;
+
+/**
+ * TLV for  ie data.
+ */
+typedef struct {
+    /** WMI_IE_TAG */
+    A_UINT32 tag;
+    /** number of bytes in ie data   */
+    A_UINT32 ie_len;
+    /** ie data array  (ie_len adjusted to  number of words  (ie_len + 4)/4)  */
+    A_UINT32 ie_data[1];
+} wmi_ie_data;
+
+/**
+ * TLV used for length/buffer
+ */
+typedef struct {
+    A_UINT32 tlv_header;    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tlv_buf_len_param */
+    A_UINT32 buf_len;       /** Length of buf */
+    /**
+     * Following this structure is the TLV byte stream of buf of length buf_len:
+     * A_UINT8 buf[];
+     *
+     */
+} wmi_tlv_buf_len_param;
+
+typedef struct {
+    /** Len of the SSID */
+    A_UINT32 ssid_len;
+    /** SSID */
+    A_UINT32 ssid[8];
+} wmi_ssid;
+
+typedef struct {
+    /** WMI_SSID_LIST_TAG */
+    A_UINT32 tag;
+    A_UINT32 num_ssids;
+    wmi_ssid ssids[1];
+} wmi_ssid_list;
+
+/* prefix used by scan requestor ids on the host */
+#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
+/* prefix used by scan request ids generated on the host */
+/* host cycles through the lower 12 bits to generate ids */
+#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
+
+#define WLAN_SCAN_PARAMS_MAX_SSID    16
+#define WLAN_SCAN_PARAMS_MAX_BSSID   4
+#define WLAN_SCAN_PARAMS_MAX_IE_LEN  512
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param */
+    /** Scan ID */
+    A_UINT32 scan_id;
+    /** Scan requestor ID */
+    A_UINT32 scan_req_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32 vdev_id;
+    /** Scan Priority, input to scan scheduler */
+    A_UINT32 scan_priority;
+    /** Scan events subscription */
+    A_UINT32 notify_scan_events;
+    /** dwell time in msec on active channels */
+    A_UINT32 dwell_time_active;
+    /** dwell time in msec on passive channels */
+    A_UINT32 dwell_time_passive;
+    /** min time in msec on the BSS channel,only valid if atleast one VDEV is active*/
+    A_UINT32 min_rest_time;
+    /** max rest time in msec on the BSS channel,only valid if at least one VDEV is active*/
+    /** the scanner will rest on the bss channel at least min_rest_time. after min_rest_time the scanner
+     *  will start checking for tx/rx activity on all VDEVs. if there is no activity the scanner will
+     *  switch to off channel. if there is activity the scanner will let the radio on the bss channel
+     *  until max_rest_time expires.at max_rest_time scanner will switch to off channel
+     *  irrespective of activity. activity is determined by the idle_time parameter.
+     */
+    A_UINT32 max_rest_time;
+    /** time before sending next set of probe requests.
+     *   The scanner keeps repeating probe requests transmission with period specified by repeat_probe_time.
+     *   The number of probe requests specified depends on the ssid_list and bssid_list
+     */
+    A_UINT32 repeat_probe_time;
+    /** time in msec between 2 consequetive probe requests with in a set. */
+    A_UINT32 probe_spacing_time;
+    /** data inactivity time in msec on bss channel that will be used by scanner for measuring the inactivity  */
+    A_UINT32 idle_time;
+    /** maximum time in msec allowed for scan  */
+    A_UINT32 max_scan_time;
+    /** delay in msec before sending first probe request after switching to a channel */
+    A_UINT32 probe_delay;
+    /** Scan control flags */
+    A_UINT32 scan_ctrl_flags;
+    /** Burst duration time in msec*/
+    A_UINT32 burst_duration;
+
+    /** # if channels to scan. In the TLV channel_list[] */
+    A_UINT32 num_chan;
+    /** number of bssids. In the TLV bssid_list[] */
+    A_UINT32 num_bssid;
+    /** number of ssid. In the TLV ssid_list[] */
+    A_UINT32 num_ssids;
+    /** number of bytes in ie data. In the TLV ie_data[]. Max len is defined by WLAN_SCAN_PARAMS_MAX_IE_LEN */
+    A_UINT32 ie_len;
+    /** Max number of probes to be sent */
+    A_UINT32 n_probes;
+
+/**
+ * TLV (tag length value) parameters follow the scan_cmd
+ * structure. The TLV's are:
+ *     A_UINT32 channel_list[];
+ *     wmi_ssid ssid_list[];
+ *     wmi_mac_addr bssid_list[];
+ *     A_UINT8 ie_data[];
+ */
+} wmi_start_scan_cmd_fixed_param;
+
+/**
+ * scan control flags.
+ */
+
+/** passively scan all channels including active channels */
+#define WMI_SCAN_FLAG_PASSIVE        0x1
+/** add wild card ssid probe request even though ssid_list is specified. */
+#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
+/** add cck rates to rates/xrate ie for the generated probe request */
+#define WMI_SCAN_ADD_CCK_RATES       0x4
+/** add ofdm rates to rates/xrate ie for the generated probe request */
+#define WMI_SCAN_ADD_OFDM_RATES      0x8
+/** To enable indication of Chan load and Noise floor to host */
+#define WMI_SCAN_CHAN_STAT_EVENT     0x10
+/** Filter Probe request frames  */
+#define WMI_SCAN_FILTER_PROBE_REQ    0x20
+/**When set, not to scan DFS channels*/
+#define WMI_SCAN_BYPASS_DFS_CHN      0x40
+/**When set, certain errors are ignored and scan continues.
+ * Different FW scan engine may use its own logic to decide what errors to ignore*/
+#define WMI_SCAN_CONTINUE_ON_ERROR   0x80
+/** Enable promiscous mode for CCXv4 */
+#define WMI_SCAN_FILTER_PROMISCOUS   0x100
+/** allow to send probe req on DFS channel */
+#define WMI_SCAN_FLAG_FORCE_ACTIVE_ON_DFS 0x200
+/** add TPC content in probe req frame */
+#define WMI_SCAN_ADD_TPC_IE_IN_PROBE_REQ  0x400
+/** add DS content in probe req frame */
+#define WMI_SCAN_ADD_DS_IE_IN_PROBE_REQ   0x800
+/** use random mac address for TA for probe request frame and add
+ * oui specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the probe req frame.
+ * if oui is not set by WMI_SCAN_PROB_REQ_OUI_CMDID  then the flag is ignored*/
+#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
+/** allow mgmt transmission during off channel scan */
+#define WMI_SCAN_OFFCHAN_MGMT_TX    0x2000
+/** allow data transmission during off channel scan */
+#define WMI_SCAN_OFFCHAN_DATA_TX    0x4000
+/** allow capture ppdu with phy errrors */
+#define WMI_SCAN_CAPTURE_PHY_ERROR  0x8000
+/** always do passive scan on passive channels */
+#define WMI_SCAN_FLAG_STRICT_PASSIVE_ON_PCHN 0x10000
+/** set HALF (10MHz) rate support */
+#define WMI_SCAN_FLAG_HALF_RATE_SUPPORT      0x20000
+/** set Quarter (5MHz) rate support */
+#define WMI_SCAN_FLAG_QUARTER_RATE_SUPPORT   0x40000
+
+/** for adaptive scan mode using 3 bits (21 - 23 bits) */
+#define WMI_SCAN_DWELL_MODE_MASK 0x00E00000
+#define WMI_SCAN_DWELL_MODE_SHIFT        21
+
+typedef enum {
+    WMI_SCAN_DWELL_MODE_DEFAULT      = 0,
+    WMI_SCAN_DWELL_MODE_CONSERVATIVE = 1,
+    WMI_SCAN_DWELL_MODE_MODERATE     = 2,
+    WMI_SCAN_DWELL_MODE_AGGRESSIVE   = 3,
+    WMI_SCAN_DWELL_MODE_STATIC       = 4,
+} WMI_SCAN_DWELL_MODE;
+
+#define WMI_SCAN_SET_DWELL_MODE(flag, mode) \
+    do { \
+        (flag) |= (((mode) << WMI_SCAN_DWELL_MODE_SHIFT) & \
+            WMI_SCAN_DWELL_MODE_MASK); \
+    } while (0)
+
+#define WMI_SCAN_GET_DWELL_MODE(flag) \
+    (((flag) & WMI_SCAN_DWELL_MODE_MASK) >> WMI_SCAN_DWELL_MODE_SHIFT)
+
+/** WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
+#define WMI_SCAN_CLASS_MASK 0xFF000000
+
+/*
+ * Masks identifying types/ID of scans
+ * Scan_Stop macros should be the same value as below defined in UMAC
+ * #define IEEE80211_SPECIFIC_SCAN       0x00000000
+ * #define IEEE80211_VAP_SCAN            0x01000000
+ * #define IEEE80211_ALL_SCANS           0x04000000
+ */
+#define WMI_SCAN_STOP_ONE       0x00000000
+#define WMI_SCN_STOP_VAP_ALL    0x01000000
+#define WMI_SCAN_STOP_ALL       0x04000000
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param */
+    /** requestor requesting cancel  */
+    A_UINT32 requestor;
+    /** Scan ID */
+    A_UINT32 scan_id;
+    /**
+     * Req Type
+     * req_type should be WMI_SCAN_STOP_ONE, WMI_SCN_STOP_VAP_ALL or WMI_SCAN_STOP_ALL
+     * WMI_SCAN_STOP_ONE indicates to stop a specific scan with scan_id
+     * WMI_SCN_STOP_VAP_ALL indicates to stop all scan requests on a specific vDev with vdev_id
+     * WMI_SCAN_STOP_ALL indicates to stop all scan requests in both Scheduler's queue and Scan Engine
+     */
+    A_UINT32 req_type;
+    /**
+     * vDev ID
+     * used when req_type equals to WMI_SCN_STOP_VAP_ALL, it indexed the vDev on which to stop the scan
+     */
+    A_UINT32 vdev_id;
+} wmi_stop_scan_cmd_fixed_param;
+
+
+#define MAX_NUM_CHAN_PER_WMI_CMD     58    /* each WMI cmd can hold 58 channel entries at most */
+#define APPEND_TO_EXISTING_CHAN_LIST 1
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_chan_list_cmd_fixed_param */
+    A_UINT32 num_scan_chans; /** no of elements in chan_info[] */
+    A_UINT32 flags; /* Flags used to control the behavior of channel list update on target side */
+/** Followed by the variable length TLV chan_info:
+ *  wmi_channel chan_info[] */
+} wmi_scan_chan_list_cmd_fixed_param;
+
+/*
+ * Priority numbers must be sequential, starting with 0.
+ */
+/* NOTE: WLAN SCAN_PRIORITY_COUNT can't be changed without breaking the compatibility */
+typedef enum {
+    WMI_SCAN_PRIORITY_VERY_LOW = 0,
+    WMI_SCAN_PRIORITY_LOW,
+    WMI_SCAN_PRIORITY_MEDIUM,
+    WMI_SCAN_PRIORITY_HIGH,
+    WMI_SCAN_PRIORITY_VERY_HIGH,
+
+    WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
+} wmi_scan_priority;
+
+/* Five Levels for Requested Priority */
+/* VERY_LOW LOW  MEDIUM   HIGH  VERY_HIGH */
+typedef A_UINT32 WLAN_PRIORITY_MAPPING[WMI_SCAN_PRIORITY_COUNT];
+
+/**
+ * to keep align with UMAC implementation, we pass only vdev_type but not vdev_subtype when we overwrite an entry for a specific vdev_subtype
+ * ex. if we need overwrite P2P Client prority entry, we will overwrite the whole table for WLAN_M_STA
+ * we will generate the new WLAN_M_STA table with modified P2P Client Entry but keep STA entry intact
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_sch_priority_table_cmd_fixed_param */
+    /**
+     * used as an index to find the proper table for a specific vdev type in default_scan_priority_mapping_table
+     * vdev_type should be one of enum in WLAN_OPMODE which inculdes WLAN_M_IBSS, WLAN_M_STA, WLAN_M_AP and WLAN_M_MONITOR currently
+     */
+    A_UINT32 vdev_type;
+    /**
+     * number of rows in mapping_table for a specific vdev
+     * for WLAN_M_STA type, there are 3 entries in the table (refer to default_scan_priority_mapping_table definition)
+     */
+    A_UINT32 number_rows;
+/**  mapping_table for a specific vdev follows this TLV
+ *   WLAN_PRIORITY_MAPPING mapping_table[]; */
+} wmi_scan_sch_priority_table_cmd_fixed_param;
+
+/** update flags */
+#define WMI_SCAN_UPDATE_SCAN_PRIORITY           0x1
+#define WMI_SCAN_UPDATE_SCAN_MIN_REST_TIME      0x2
+#define WMI_SCAN_UPDATE_SCAN_MAX_REST_TIME      0x4
+
+typedef struct {
+    A_UINT32 tlv_header;
+    /** requestor requesting update scan request  */
+    A_UINT32 requestor;
+    /** Scan ID of the scan request that need to be update */
+    A_UINT32 scan_id;
+    /** update flags, indicating which of the following fields are valid and need to be updated*/
+    A_UINT32 scan_update_flags;
+    /** scan priority. Only valid if WMI_SCAN_UPDATE_SCAN_PRIORITY flag is set in scan_update_flag */
+    A_UINT32 scan_priority;
+    /** min rest time. Only valid if WMI_SCAN_UPDATE_MIN_REST_TIME flag is set in scan_update_flag */
+    A_UINT32 min_rest_time;
+    /** min rest time. Only valid if WMI_SCAN_UPDATE_MAX_REST_TIME flag is set in scan_update_flag */
+    A_UINT32 max_rest_time;
+} wmi_scan_update_request_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    /** oui to be used in probe request frame when  random mac addresss is
+     * requested part of scan parameters. this is applied to both FW internal scans and
+     * host initated scans. host can request for random mac address with
+     * WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ flag.     */
+    A_UINT32 prob_req_oui;
+} wmi_scan_prob_req_oui_cmd_fixed_param;
+
+enum wmi_scan_event_type {
+    WMI_SCAN_EVENT_STARTED = 0x1,
+    WMI_SCAN_EVENT_COMPLETED = 0x2,
+    WMI_SCAN_EVENT_BSS_CHANNEL = 0x4,
+    WMI_SCAN_EVENT_FOREIGN_CHANNEL = 0x8,
+    WMI_SCAN_EVENT_DEQUEUED = 0x10, /* scan request got dequeued */
+    WMI_SCAN_EVENT_PREEMPTED = 0x20, /* preempted by other high priority scan */
+    WMI_SCAN_EVENT_START_FAILED = 0x40, /* scan start failed */
+    WMI_SCAN_EVENT_RESTARTED = 0x80, /* scan restarted */
+    WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = 0x100,
+    WMI_SCAN_EVENT_SUSPENDED = 0x200, /* scan request is suspended */
+    WMI_SCAN_EVENT_RESUMED = 0x400,   /* scan request is resumed */
+    WMI_SCAN_EVENT_MAX = 0x8000
+};
+
+enum wmi_scan_completion_reason {
+    /** scan related events */
+    WMI_SCAN_REASON_NONE = 0xFF,
+    WMI_SCAN_REASON_COMPLETED = 0,
+    WMI_SCAN_REASON_CANCELLED = 1,
+    WMI_SCAN_REASON_PREEMPTED = 2,
+    WMI_SCAN_REASON_TIMEDOUT = 3,
+    WMI_SCAN_REASON_INTERNAL_FAILURE = 4, /* This reason indication failures when performaing scan */
+    WMI_SCAN_REASON_SUSPENDED = 5,
+    WMI_SCAN_REASON_MAX,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_event_fixed_param */
+    /** scan event (wmi_scan_event_type) */
+    A_UINT32 event;
+    /** status of the scan completion event */
+    A_UINT32 reason;
+    /** channel freq , only valid for FOREIGN channel event*/
+    A_UINT32 channel_freq;
+    /**id of the requestor whose scan is in progress */
+    A_UINT32 requestor;
+    /**id of the scan that is in progress */
+    A_UINT32 scan_id;
+    /**id of VDEV that requested the scan */
+    A_UINT32 vdev_id;
+} wmi_scan_event_fixed_param;
+
+/* WMI Diag event */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag is WMITLV_TAG_STRUC_wmi_diag_event_fixed_param */
+    A_UINT32 time_stamp; /* Reference timestamp. diag frame contains diff value */
+    A_UINT32 count;   /* Number of diag frames added to current event */
+    A_UINT32 dropped;
+    /* followed by WMITLV_TAG_ARRAY_BYTE */
+} wmi_diag_event_fixed_param;
+
+/*
+* If FW has multiple active channels due to MCC(multi channel concurrency),
+* then these stats are combined stats for all the active channels.
+*/
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_update_whal_mib_stats_event_fixed_param */
+	/** ack count, it is an incremental number, not accumulated number */
+	A_UINT32 ackRcvBad;
+	/** bad rts count, it is an incremental number, not accumulated number */
+    A_UINT32 rtsBad;
+	/** good rts, it is an incremental number, not accumulated number */
+    A_UINT32 rtsGood;
+	/** fcs count, it is an incremental number, not accumulated number */
+    A_UINT32 fcsBad;
+	/** beacon count, it is an incremental number, not accumulated number */
+    A_UINT32 noBeacons;
+} wmi_update_whal_mib_stats_event_fixed_param;
+
+/*
+ * This defines how much headroom is kept in the
+ * receive frame between the descriptor and the
+ * payload, in order for the WMI PHY error and
+ * management handler to insert header contents.
+ *
+ * This is in bytes.
+ */
+#define WMI_MGMT_RX_HDR_HEADROOM (sizeof(wmi_comb_phyerr_rx_hdr) + WMI_TLV_HDR_SIZE + sizeof(wmi_single_phyerr_rx_hdr))
+
+/** This event will be used for sending scan results
+ * as well as rx mgmt frames to the host. The rx buffer
+ * will be sent as part of this WMI event. It would be a
+ * good idea to pass all the fields in the RX status
+ * descriptor up to the host.
+ */
+/* ATH_MAX_ANTENNA value (4) can't be changed without breaking the compatibility */
+#define ATH_MAX_ANTENNA 4 /* To support beelinear, which is up to 4 chains */
+
+/** flag indicating that the the  mgmt frame (probe req/beacon) is received in the context of extscan performed by FW */
+#define WMI_MGMT_RX_HDR_EXTSCAN     0x01
+/** flag indicating that the the  mgmt frame (probe req/beacon) is received in the context of matched network by FW ENLO */
+#define WMI_MGMT_RX_HDR_ENLO     0x02
+
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mgmt_rx_hdr */
+    /** channel on which this frame is received. */
+    A_UINT32 channel;
+    /** snr information used to cal rssi */
+    A_UINT32 snr;
+    /** Rate kbps */
+    A_UINT32 rate;
+    /** rx phy mode WLAN_PHY_MODE */
+    A_UINT32 phy_mode;
+    /** length of the frame */
+    A_UINT32 buf_len;
+    /** rx status */
+    A_UINT32 status;
+    /** RSSI of PRI 20MHz for each chain. */
+    A_UINT32 rssi_ctl[ATH_MAX_ANTENNA];
+    /** information about the management frame e.g. can give a scan source for a scan result mgmt frame */
+    A_UINT32 flags;
+    /** combined RSSI, i.e. the sum of the snr + noise floor (dBm units) */
+    A_INT32 rssi;
+    /** delta between local TSF(TSF timestamp when frame was RXd)
+     *  and remote TSF(TSF timestamp in the IE for mgmt frame -
+     *  beacon,proberesp for e.g). If remote TSF is not available,
+     *  delta set to 0.
+     *  Although tsf_delta is stored as A_UINT32, it can be negative,
+     *  and thus would need to be sign-extended if added to a value
+     *  larger than 32 bits.
+     */
+    A_UINT32 tsf_delta;
+
+    /* The lower 32 bits of the TSF (rx_tsf_l32) is copied by FW from
+     * TSF timestamp in the RX MAC descriptor provided by HW.
+     */
+    A_UINT32 rx_tsf_l32;
+
+    /* The Upper 32 bits (rx_tsf_u32) is filled by reading the TSF register
+     * after the packet is received.
+     */
+    A_UINT32 rx_tsf_u32;
+
+/* This TLV is followed by array of bytes:
+ *   A_UINT8 bufp[]; <-- management frame buffer
+ */
+} wmi_mgmt_rx_hdr;
+
+typedef struct {
+    /** TSF timestamp */
+    A_UINT32 tsf_timestamp;
+
+    /**
+     * Current freq1, freq2
+     *
+     * [7:0]:    freq1[lo]
+     * [15:8] :   freq1[hi]
+     * [23:16]:   freq2[lo]
+     * [31:24]:   freq2[hi]
+     */
+    A_UINT32 freq_info_1;
+
+    /**
+     * Combined RSSI over all chains and channel width for this PHY error
+     *
+     * [7:0]: RSSI combined
+     * [15:8]: Channel width (MHz)
+     * [23:16]: PHY error code
+     * [24:16]: reserved (future use)
+     */
+    A_UINT32 freq_info_2;
+
+    /**
+     * RSSI on chain 0 through 3
+     *
+     * This is formatted the same as the PPDU_START RX descriptor
+     * field:
+     *
+     * [7:0]:   pri20
+     * [15:8]:  sec20
+     * [23:16]: sec40
+     * [31:24]: sec80
+     */
+    A_UINT32 rssi_chain0;
+    A_UINT32 rssi_chain1;
+    A_UINT32 rssi_chain2;
+    A_UINT32 rssi_chain3;
+
+    /**
+     * Last calibrated NF value for chain 0 through 3
+     *
+     * nf_list_1:
+     *
+     * + [15:0] - chain 0
+     * + [31:16] - chain 1
+     *
+     * nf_list_2:
+     *
+     * + [15:0] - chain 2
+     * + [31:16] - chain 3
+     */
+    A_UINT32 nf_list_1;
+    A_UINT32 nf_list_2;
+
+    /** Length of the frame */
+    A_UINT32 buf_len;
+} wmi_single_phyerr_rx_hdr;
+
+#define WMI_UNIFIED_FREQINFO_1_LO   0x000000ff
+#define WMI_UNIFIED_FREQINFO_1_LO_S 0
+#define WMI_UNIFIED_FREQINFO_1_HI   0x0000ff00
+#define WMI_UNIFIED_FREQINFO_1_HI_S 8
+#define WMI_UNIFIED_FREQINFO_2_LO   0x00ff0000
+#define WMI_UNIFIED_FREQINFO_2_LO_S 16
+#define WMI_UNIFIED_FREQINFO_2_HI   0xff000000
+#define WMI_UNIFIED_FREQINFO_2_HI_S 24
+
+/*
+ * Please keep in mind that these _SET macros break macro side effect
+ * assumptions; don't be clever with them.
+ */
+#define WMI_UNIFIED_FREQ_INFO_GET(hdr, f)                                   \
+            (WMI_F_MS((hdr)->freq_info_1,                                   \
+              WMI_UNIFIED_FREQINFO_##f##_LO)                                \
+              | (WMI_F_MS((hdr)->freq_info_1,                               \
+                 WMI_UNIFIED_FREQINFO_##f##_HI) << 8))
+
+#define WMI_UNIFIED_FREQ_INFO_SET(hdr, f, v)                                \
+        do {                                                                \
+            WMI_F_RMW((hdr)->freq_info_1, (v) & 0xff,                       \
+                WMI_UNIFIED_FREQINFO_##f##_LO);                             \
+            WMI_F_RMW((hdr)->freq_info_1, ((v) >> 8) & 0xff,                \
+                WMI_UNIFIED_FREQINFO_##f##_HI);                             \
+        } while (0)
+
+#define WMI_UNIFIED_FREQINFO_2_RSSI_COMB    0x000000ff
+#define WMI_UNIFIED_FREQINFO_2_RSSI_COMB_S  0
+#define WMI_UNIFIED_FREQINFO_2_CHWIDTH      0x0000ff00
+#define WMI_UNIFIED_FREQINFO_2_CHWIDTH_S    8
+#define WMI_UNIFIED_FREQINFO_2_PHYERRCODE   0x00ff0000
+#define WMI_UNIFIED_FREQINFO_2_PHYERRCODE_S 16
+
+#define WMI_UNIFIED_RSSI_COMB_GET(hdr)                                      \
+            ((int8_t) (WMI_F_MS((hdr)->freq_info_2,                         \
+                WMI_UNIFIED_FREQINFO_2_RSSI_COMB)))
+
+#define WMI_UNIFIED_RSSI_COMB_SET(hdr, v)                                   \
+            WMI_F_RMW((hdr)->freq_info_2, (v) & 0xff,                       \
+              WMI_UNIFIED_FREQINFO_2_RSSI_COMB);
+
+#define WMI_UNIFIED_CHWIDTH_GET(hdr)                                        \
+            WMI_F_MS((hdr)->freq_info_2, WMI_UNIFIED_FREQINFO_2_CHWIDTH)
+
+#define WMI_UNIFIED_CHWIDTH_SET(hdr, v)                                     \
+            WMI_F_RMW((hdr)->freq_info_2, (v) & 0xff,                       \
+              WMI_UNIFIED_FREQINFO_2_CHWIDTH);
+
+#define WMI_UNIFIED_PHYERRCODE_GET(hdr)                                     \
+            WMI_F_MS((hdr)->freq_info_2, WMI_UNIFIED_FREQINFO_2_PHYERRCODE)
+
+#define WMI_UNIFIED_PHYERRCODE_SET(hdr, v)                                  \
+            WMI_F_RMW((hdr)->freq_info_2, (v) & 0xff,                       \
+              WMI_UNIFIED_FREQINFO_2_PHYERRCODE);
+
+#define WMI_UNIFIED_CHAIN_0     0x0000ffff
+#define WMI_UNIFIED_CHAIN_0_S   0
+#define WMI_UNIFIED_CHAIN_1     0xffff0000
+#define WMI_UNIFIED_CHAIN_1_S   16
+#define WMI_UNIFIED_CHAIN_2     0x0000ffff
+#define WMI_UNIFIED_CHAIN_2_S   0
+#define WMI_UNIFIED_CHAIN_3     0xffff0000
+#define WMI_UNIFIED_CHAIN_3_S   16
+
+#define WMI_UNIFIED_CHAIN_0_FIELD   nf_list_1
+#define WMI_UNIFIED_CHAIN_1_FIELD   nf_list_1
+#define WMI_UNIFIED_CHAIN_2_FIELD   nf_list_2
+#define WMI_UNIFIED_CHAIN_3_FIELD   nf_list_2
+
+#define WMI_UNIFIED_NF_CHAIN_GET(hdr, c)                                    \
+            ((int16_t) (WMI_F_MS((hdr)->WMI_UNIFIED_CHAIN_##c##_FIELD,      \
+              WMI_UNIFIED_CHAIN_##c)))
+
+#define WMI_UNIFIED_NF_CHAIN_SET(hdr, c, nf)                                \
+            WMI_F_RMW((hdr)->WMI_UNIFIED_CHAIN_##c##_FIELD, (nf) & 0xffff,  \
+              WMI_UNIFIED_CHAIN_##c);
+
+/*
+ * For now, this matches what the underlying hardware is doing.
+ * Update ar6000ProcRxDesc() to use these macros when populating
+ * the rx descriptor and then we can just copy the field over
+ * to the WMI PHY notification without worrying about breaking
+ * things.
+ */
+#define WMI_UNIFIED_RSSI_CHAN_PRI20     0x000000ff
+#define WMI_UNIFIED_RSSI_CHAN_PRI20_S   0
+#define WMI_UNIFIED_RSSI_CHAN_SEC20     0x0000ff00
+#define WMI_UNIFIED_RSSI_CHAN_SEC20_S   8
+#define WMI_UNIFIED_RSSI_CHAN_SEC40     0x00ff0000
+#define WMI_UNIFIED_RSSI_CHAN_SEC40_S   16
+#define WMI_UNIFIED_RSSI_CHAN_SEC80     0xff000000
+#define WMI_UNIFIED_RSSI_CHAN_SEC80_S   24
+
+#define WMI_UNIFIED_RSSI_CHAN_SET(hdr, c, ch, rssi)                         \
+            WMI_F_RMW((hdr)->rssi_chain##c, (rssi) & 0xff,                  \
+              WMI_UNIFIED_RSSI_CHAN_##ch);
+
+#define WMI_UNIFIED_RSSI_CHAN_GET(hdr, c, ch)                               \
+            ((int8_t) (WMI_F_MS((hdr)->rssi_chain##c,                       \
+              WMI_UNIFIED_RSSI_CHAN_##ch)))
+
+typedef struct {
+    /** Phy error event header */
+    wmi_single_phyerr_rx_hdr hdr;
+    /** frame buffer */
+    A_UINT8 bufp[1];
+} wmi_single_phyerr_rx_event;
+
+/* PHY ERROR MASK 0 */
+/* bits 1:0 defined but not published */
+#define WMI_PHY_ERROR_MASK0_RADAR                           (1 <<  2)
+/* bits 23:3 defined but not published */
+#define WMI_PHY_ERROR_MASK0_FALSE_RADAR_EXT                 (1 << 24)
+/* bits 25:24 defined but not published */
+#define WMI_PHY_ERROR_MASK0_SPECTRAL_SCAN                   (1 << 26)
+/* bits 31:27 defined but not published */
+
+/* PHY ERROR MASK 1 */
+/* bits 13:0 defined but not published */
+/* bits 31:14 reserved */
+
+/* PHY ERROR MASK 2 */
+/* bits 31:0 reserved */
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_comb_phyerr_rx_hdr */
+    /** Phy error phy error count */
+    A_UINT32 num_phyerr_events;
+    A_UINT32 tsf_l32;
+    A_UINT32 tsf_u32;
+    A_UINT32 buf_len;
+    union {
+        A_UINT32 pmac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    A_UINT32 rsPhyErrMask0; /* see WMI_PHY_ERROR_MASK0 */
+    A_UINT32 rsPhyErrMask1; /* see WMI_PHY_ERROR_MASK1 */
+    A_UINT32 rsPhyErrMask2; /* see WMI_PHY_ERROR_MASK2 */
+/* This TLV is followed by array of bytes:
+ *     frame buffer - contains multiple payloads in the order:
+ *         header - payload, header - payload...
+ *     (The header is of type: wmi_single_phyerr_rx_hdr)
+ *   A_UINT8 bufp[];
+ */
+} wmi_comb_phyerr_rx_hdr;
+
+/* WMI MGMT TX  */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mgmt_tx_hdr */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** xmit rate */
+    A_UINT32 tx_rate;
+    /** xmit power */
+    A_UINT32 tx_power;
+    /** Buffer length in bytes */
+    A_UINT32 buf_len;
+/* This TLV is followed by array of bytes:
+ *   A_UINT8 bufp[]; <-- management frame buffer
+ */
+} wmi_mgmt_tx_hdr;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mgmt_tx_send_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 desc_id;  /* echoed in tx_compl_event */
+    A_UINT32 chanfreq; /* MHz units */
+    A_UINT32 paddr_lo;
+    A_UINT32 paddr_hi;
+    A_UINT32 frame_len;
+    A_UINT32 buf_len;  /** Buffer length in bytes */
+/* This TLV is followed by array of bytes: First 64 bytes of management frame
+ *   A_UINT8 bufp[];
+ */
+} wmi_mgmt_tx_send_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_echo_event_fixed_param */
+    A_UINT32 value;
+} wmi_echo_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_echo_cmd_fixed_param */
+    A_UINT32 value;
+} wmi_echo_cmd_fixed_param;
+
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_regdomain_cmd_fixed_param */
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    /** reg domain code */
+    A_UINT32 reg_domain;
+    A_UINT32 reg_domain_2G;
+    A_UINT32 reg_domain_5G;
+    A_UINT32 conformance_test_limit_2G;
+    A_UINT32 conformance_test_limit_5G;
+    A_UINT32 dfs_domain;
+} wmi_pdev_set_regdomain_cmd_fixed_param;
+
+typedef struct {
+    /** TRUE for scan start and flase for scan end */
+    A_UINT32 scan_start;
+} wmi_pdev_scan_cmd;
+
+/* WMI support for setting ratemask in target */
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_config_ratemask_fixed_param */
+    A_UINT32 vdev_id;
+    /* 0 - cck/ofdm
+     * 1 - HT
+     * 2 - VHT */
+    A_UINT32 type;
+
+    A_UINT32 mask_lower32;
+    A_UINT32 mask_higher32;
+} wmi_vdev_config_ratemask_cmd_fixed_param;
+
+/* nrp action - Filter Neighbor Rx Packets  - add/remove filter */
+enum {
+    WMI_FILTER_NRP_ACTION_ADD        = 0x1,
+    WMI_FILTER_NRP_ACTION_REMOVE     = 0x2,
+    WMI_FILTER_NRP_ACTION_GET_LIST   = 0x3,
+}; /* nrp - Neighbor Rx Packets */
+
+/* nrp type - Filter Neighbor Rx Packets  - ap/client addr */
+enum {
+    WMI_FILTER_NRP_TYPE_AP_BSSID     = 0x1,
+    WMI_FILTER_NRP_TYPE_STA_MACADDR  = 0x2,
+};
+
+/* nrp flag - Filter Neighbor Rx Packets
+ * (capture flag, 2 & 3 not initially supported)
+ */
+enum {
+    WMI_FILTER_NRP_CAPTURE_ONLY_RX_PACKETS      = 0x1,
+    WMI_FILTER_NRP_CAPTURE_ONLY_TX_PACKETS      = 0x2,
+    WMI_FILTER_NRP_CAPTURE_BOTH_TXRX_PACKETS    = 0x3,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_filter_nrp_config_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    /* AP Bssid or Client Mac-addr */
+    wmi_mac_addr addr;
+    /* Add/Remove NRF Filter */
+    A_UINT32 action; /* WMI_FILTER_NRP_ACTION enum */
+    /* client/ap filter */
+    A_UINT32 type; /* WMI_FILTER_NRP_TYPE enum */
+    /* optional - tx/rx capture */
+    A_UINT32 flag; /* WMI_FILTER_NRP_CAPTURE enum */
+    /* BSSID index - index of the BSSID register */
+    A_UINT32 bssid_idx;
+} wmi_vdev_filter_nrp_config_cmd_fixed_param; /* Filter for Neighbor Rx Packets */
+
+
+/*Command to set/unset chip in quiet mode*/
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_quiet_cmd_fixed_param */
+    A_UINT32 pdev_id; /** pdev_id for identifying the MAC, See macros starting with WMI_PDEV_ID_ for values. */
+    A_UINT32 period; /*period in TUs*/
+    A_UINT32 duration; /*duration in TUs*/
+    A_UINT32 next_start; /*offset in TUs*/
+    A_UINT32 enabled; /*enable/disable*/
+} wmi_pdev_set_quiet_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_quiet_cmd_fixed_param */
+    A_UINT32 vdev_id;    /* Virtual interface ID */
+    A_UINT32 period;     /* period in TUs */
+    A_UINT32 duration;   /* duration in TUs */
+    A_UINT32 next_start; /* offset in TUs */
+    A_UINT32 enabled;    /* enable/disable */
+} wmi_vdev_set_quiet_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;   /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_custom_aggr_size_cmd_fixed_param */
+    A_UINT32 vdev_id;      /* vdev id indicating to which the vdev custom aggregation size will be applied. */
+    A_UINT32 tx_aggr_size; /* Size for tx aggregation (max MPDUs per A-MPDU) for the vdev mentioned in vdev id */
+    A_UINT32 rx_aggr_size; /* Size for rx aggregation (block ack window size limit) for the vdev mentioned in vdev id*/
+} wmi_vdev_set_custom_aggr_size_cmd_fixed_param;
+
+/*
+ * Command to enable/disable Green AP Power Save.
+ * This helps conserve power during AP operation. When the AP has no
+ * stations associated with it, the host can enable Green AP Power Save
+ * to request the firmware to shut down all but one transmit and receive
+ * chains.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_green_ap_ps_enable_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    A_UINT32 enable; /*1:enable, 0:disable*/
+} wmi_pdev_green_ap_ps_enable_cmd_fixed_param;
+
+
+#define MAX_HT_IE_LEN 32
+/* DEPRECATED */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_ht_ie_cmd_fixed_param */
+    A_UINT32 reserved0; /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */
+    A_UINT32 ie_len; /*length of the ht ie in the TLV ie_data[] */
+    A_UINT32 tx_streams; /* Tx streams supported for this HT IE */
+    A_UINT32 rx_streams; /* Rx streams supported for this HT IE */
+/** The TLV for the HT IE follows:
+ *       A_UINT32 ie_data[];
+ */
+} wmi_pdev_set_ht_ie_cmd_fixed_param;
+
+#define MAX_VHT_IE_LEN 32
+/* DEPRECATED */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_vht_ie_cmd_fixed_param */
+    A_UINT32 reserved0; /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */
+    A_UINT32 ie_len; /*length of the vht ie in the TLV ie_data[] */
+    A_UINT32 tx_streams; /* Tx streams supported for this HT IE */
+    A_UINT32 rx_streams; /* Rx streams supported for this HT IE */
+/** The TLV for the VHT IE follows:
+ *       A_UINT32 ie_data[];
+ */
+} wmi_pdev_set_vht_ie_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_base_macaddr_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    wmi_mac_addr base_macaddr;
+} wmi_pdev_set_base_macaddr_cmd_fixed_param;
+
+/*
+ * For now, the spectral configuration is global rather than
+ * per-vdev.  The vdev is a placeholder and will be ignored
+ * by the firmware.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_spectral_configure_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 spectral_scan_count;
+    A_UINT32 spectral_scan_period;
+    A_UINT32 spectral_scan_priority;
+    A_UINT32 spectral_scan_fft_size;
+    A_UINT32 spectral_scan_gc_ena;
+    A_UINT32 spectral_scan_restart_ena;
+    A_UINT32 spectral_scan_noise_floor_ref;
+    A_UINT32 spectral_scan_init_delay;
+    A_UINT32 spectral_scan_nb_tone_thr;
+    A_UINT32 spectral_scan_str_bin_thr;
+    A_UINT32 spectral_scan_wb_rpt_mode;
+    A_UINT32 spectral_scan_rssi_rpt_mode;
+    A_UINT32 spectral_scan_rssi_thr;
+    A_UINT32 spectral_scan_pwr_format;
+    A_UINT32 spectral_scan_rpt_mode;
+    A_UINT32 spectral_scan_bin_scale;
+    A_UINT32 spectral_scan_dBm_adj;
+    A_UINT32 spectral_scan_chn_mask;
+} wmi_vdev_spectral_configure_cmd_fixed_param;
+
+/*
+ * Enabling, disabling and triggering the spectral scan
+ * is a per-vdev operation.  That is, it will set channel
+ * flags per vdev rather than globally; so concurrent scan/run
+ * and multiple STA (eg p2p, tdls, multi-band STA) is possible.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_spectral_enable_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    /* 0 - ignore; 1 - trigger, 2 - clear trigger */
+    A_UINT32 trigger_cmd;
+    /* 0 - ignore; 1 - enable, 2 - disable */
+    A_UINT32 enable_cmd;
+} wmi_vdev_spectral_enable_cmd_fixed_param;
+
+typedef enum {
+    WMI_CSA_IE_PRESENT = 0x00000001,
+    WMI_XCSA_IE_PRESENT = 0x00000002,
+    WMI_WBW_IE_PRESENT = 0x00000004,
+    WMI_CSWARP_IE_PRESENT = 0x00000008,
+} WMI_CSA_EVENT_IES_PRESENT_FLAG;
+
+/* wmi CSA receive event from beacon frame */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_csa_event_fixed_param */
+    A_UINT32 i_fc_dur; /* Bit 0-15: FC, Bit 16-31: DUR */
+    wmi_mac_addr i_addr1;
+    wmi_mac_addr i_addr2;
+    /* NOTE: size of array of csa_ie[], xcsa_ie[], and wb_ie[] cannot be
+     * changed in the future without breaking WMI compatibility */
+    A_UINT32 csa_ie[2];
+    A_UINT32 xcsa_ie[2];
+    A_UINT32 wb_ie[2];
+    A_UINT32 cswarp_ie;
+    A_UINT32 ies_present_flag; /* WMI_CSA_EVENT_IES_PRESENT_FLAG */
+} wmi_csa_event_fixed_param;
+
+typedef enum {
+    WAL_PEER_MCAST2UCAST_DISABLED    = 0,
+    WAL_PEER_MCAST2UCAST_DROP_EMPTY  = 1, /* Drop the frames if match is not found */
+    WAL_PEER_MCAST2UCAST_MCAST_EMPTY = 2, /* Send as mcast if match is not found */
+} WMI_PEER_MCAST2UCAST_MODE;
+
+typedef enum {
+    /** TX chain mask */
+    WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+    /** RX chain mask */
+    WMI_PDEV_PARAM_RX_CHAIN_MASK,
+    /** TX power limit for 2G Radio */
+    WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
+    /** TX power limit for 5G Radio */
+    WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
+    /** TX power scale */
+    WMI_PDEV_PARAM_TXPOWER_SCALE,
+    /** Beacon generation mode . 0: host, 1: target   */
+    WMI_PDEV_PARAM_BEACON_GEN_MODE,
+    /** Beacon generation mode . 0: staggered 1: bursted   */
+    WMI_PDEV_PARAM_BEACON_TX_MODE,
+    /** Resource manager off chan mode .
+     * 0: turn off off chan mode. 1: turn on offchan mode
+     */
+    WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+    /** Protection mode  0: no protection 1:use CTS-to-self 2: use RTS/CTS */
+    WMI_PDEV_PARAM_PROTECTION_MODE,
+    /** Dynamic bandwidth 0: disable 1: enable */
+    WMI_PDEV_PARAM_DYNAMIC_BW,
+    /** Non aggregrate/ 11g sw retry threshold.0-disable */
+    WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+    /** aggregrate sw retry threshold. 0-disable*/
+    WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
+    /** Station kickout threshold (non of consecutive failures).0-disable */
+    WMI_PDEV_PARAM_STA_KICKOUT_TH,
+    /** Aggerate size scaling configuration per AC */
+    WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+    /** LTR enable */
+    WMI_PDEV_PARAM_LTR_ENABLE,
+    /** LTR latency for BE, in us */
+    WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
+    /** LTR latency for BK, in us */
+    WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
+    /** LTR latency for VI, in us */
+    WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
+    /** LTR latency for VO, in us  */
+    WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
+    /** LTR AC latency timeout, in ms */
+    WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+    /** LTR platform latency override, in us */
+    WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+    /** LTR-M override, in us */
+    WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
+    /** Tx activity timeout for LTR, in us */
+    WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+    /** L1SS state machine enable */
+    WMI_PDEV_PARAM_L1SS_ENABLE,
+    /** Deep sleep state machine enable */
+    WMI_PDEV_PARAM_DSLEEP_ENABLE,
+    /** RX buffering flush enable */
+    WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
+    /** RX buffering matermark */
+    WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
+    /** RX buffering timeout enable */
+    WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+    /** RX buffering timeout value */
+    WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
+    /** pdev level stats update period in ms */
+    WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+    /** vdev level stats update period in ms */
+    WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+    /** peer level stats update period in ms */
+    WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+    /** beacon filter status update period */
+    WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+    /** QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
+    WMI_PDEV_PARAM_PMF_QOS,
+    /** Access category on which ARP frames are sent */
+    WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
+    /** DCS configuration */
+    WMI_PDEV_PARAM_DCS,
+    /** Enable/Disable ANI on target */
+    WMI_PDEV_PARAM_ANI_ENABLE,
+    /** configure the ANI polling period */
+    WMI_PDEV_PARAM_ANI_POLL_PERIOD,
+    /** configure the ANI listening period */
+    WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
+    /** configure OFDM immunity level */
+    WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
+    /** configure CCK immunity level */
+    WMI_PDEV_PARAM_ANI_CCK_LEVEL,
+    /** Enable/Disable CDD for 1x1 STAs in rate control module */
+    WMI_PDEV_PARAM_DYNTXCHAIN,
+    /** Enable/Disable proxy STA */
+    WMI_PDEV_PARAM_PROXY_STA,
+    /** Enable/Disable low power state when all VDEVs are inactive/idle. */
+    WMI_PDEV_PARAM_IDLE_PS_CONFIG,
+    /** Enable/Disable power gating sleep */
+    WMI_PDEV_PARAM_POWER_GATING_SLEEP,
+    /** Enable/Disable Rfkill */
+    WMI_PDEV_PARAM_RFKILL_ENABLE,
+    /** Set Bursting DUR */
+    WMI_PDEV_PARAM_BURST_DUR,
+    /** Set Bursting ENABLE */
+    WMI_PDEV_PARAM_BURST_ENABLE,
+    /** HW rfkill config */
+    WMI_PDEV_PARAM_HW_RFKILL_CONFIG,
+    /** Enable radio low power features */
+    WMI_PDEV_PARAM_LOW_POWER_RF_ENABLE,
+   /** L1SS entry and residency time track */
+    WMI_PDEV_PARAM_L1SS_TRACK,
+    /** set hyst at runtime, requirement from SS */
+    WMI_PDEV_PARAM_HYST_EN,
+    /** Enable/ Disable POWER COLLAPSE */
+    WMI_PDEV_PARAM_POWER_COLLAPSE_ENABLE,
+   /** configure LED system state */
+    WMI_PDEV_PARAM_LED_SYS_STATE,
+   /** Enable/Disable LED */
+    WMI_PDEV_PARAM_LED_ENABLE,
+    /** set DIRECT AUDIO time latency */
+    WMI_PDEV_PARAM_AUDIO_OVER_WLAN_LATENCY, /* DEPRECATED */
+    /** set DIRECT AUDIO Feature ENABLE */
+    WMI_PDEV_PARAM_AUDIO_OVER_WLAN_ENABLE, /* DEPRECATED */
+    /** pdev level whal mib stats update enable */
+    WMI_PDEV_PARAM_WHAL_MIB_STATS_UPDATE_ENABLE,
+    /** ht/vht info based on vdev */
+    WMI_PDEV_PARAM_VDEV_RATE_STATS_UPDATE_PERIOD,
+    /** Set CTS channel BW for dynamic BW adjustment feature */
+    WMI_PDEV_PARAM_CTS_CBW,
+    /** Set GPIO pin info used by WNTS */
+    WMI_PDEV_PARAM_WNTS_CONFIG,
+    /** Enable/Disable hardware adaptive early rx feature */
+    WMI_PDEV_PARAM_ADAPTIVE_EARLY_RX_ENABLE,
+    /** The minimum early rx duration, to ensure early rx duration is non-zero */
+    WMI_PDEV_PARAM_ADAPTIVE_EARLY_RX_MIN_SLEEP_SLOP,
+    /** Increasing/decreasing step used by hardware */
+    WMI_PDEV_PARAM_ADAPTIVE_EARLY_RX_INC_DEC_STEP,
+    /** The fixed early rx duration when adaptive early rx is disabled */
+    WMI_PDEV_PARAM_EARLY_RX_FIX_SLEEP_SLOP,
+    /** Enable/Disable bmiss based adaptive beacon timeout feature */
+    WMI_PDEV_PARAM_BMISS_BASED_ADAPTIVE_BTO_ENABLE,
+    /** The minimum beacon timeout duration, to ensure beacon timeout duration is non-zero */
+    WMI_PDEV_PARAM_BMISS_BTO_MIN_BCN_TIMEOUT,
+    /** Increasing/decreasing step used by hardware */
+    WMI_PDEV_PARAM_BMISS_BTO_INC_DEC_STEP,
+    /** The fixed beacon timeout duration when bmiss based adaptive beacon timeout is disabled */
+    WMI_PDEV_PARAM_BTO_FIX_BCN_TIMEOUT,
+    /** Enable/Disable Congestion Estimator based adaptive beacon timeout feature */
+    WMI_PDEV_PARAM_CE_BASED_ADAPTIVE_BTO_ENABLE,
+    /** combo value of ce_id, ce_threshold, ce_time, refer to WMI_CE_BTO_CE_ID_MASK */
+    WMI_PDEV_PARAM_CE_BTO_COMBO_CE_VALUE,
+    /** 2G TX chain mask */
+    WMI_PDEV_PARAM_TX_CHAIN_MASK_2G,
+    /** 2G RX chain mask */
+    WMI_PDEV_PARAM_RX_CHAIN_MASK_2G,
+    /** 5G TX chain mask */
+    WMI_PDEV_PARAM_TX_CHAIN_MASK_5G,
+    /** 5G RX chain mask */
+    WMI_PDEV_PARAM_RX_CHAIN_MASK_5G,
+    /* Set tx chain mask for CCK rates */
+    WMI_PDEV_PARAM_TX_CHAIN_MASK_CCK,
+    /* Set tx chain mask for 1SS stream */
+    WMI_PDEV_PARAM_TX_CHAIN_MASK_1SS,
+    /* Enable/Disable CTS2Self for P2P GO when Non-P2P Client is connected */
+    WMI_PDEV_PARAM_CTS2SELF_FOR_P2P_GO_CONFIG,
+    /** TX power backoff in dB: tx power -= param value
+     * Host passes values(DB) to Halphy, Halphy reduces the power table by
+     * the values. Safety check will happen in Halphy
+     */
+    WMI_PDEV_PARAM_TXPOWER_DECR_DB,
+    /** enable and disable aggregate burst along with duration */
+    WMI_PDEV_PARAM_AGGR_BURST,
+    /** Set the global RX decap mode */
+    WMI_PDEV_PARAM_RX_DECAP_MODE,
+    /** Enable/Disable Fast channel reset */
+    WMI_PDEV_PARAM_FAST_CHANNEL_RESET,
+    /** Default antenna for Smart antenna */
+    WMI_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
+    /** Set the user-specified antenna gain */
+    WMI_PDEV_PARAM_ANTENNA_GAIN,
+    /** Set the user-specified RX filter */
+    WMI_PDEV_PARAM_RX_FILTER,
+    /** configure the user-specified MCAST tid for managed mcast feature
+     *  0-15 is the valid range. 0xff will clear the tid setting */
+    WMI_PDEV_SET_MCAST_TO_UCAST_TID,
+    /** Enable/Disable Proxy sta mode */
+    WMI_PDEV_PARAM_PROXY_STA_MODE,
+    /** configure the mcast2ucast mode for the pdev->peer_mcast.
+     *  See WMI_PEER_MCAST2UCAST_MODE for possible values */
+    WMI_PDEV_PARAM_SET_MCAST2UCAST_MODE,
+    /** Sets the Mcast buffers for cloning, to support Mcast enhancement */
+    WMI_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
+    /** Remove the Mcast buffers added by host */
+    WMI_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
+    /** En/disable station power save state indication */
+    WMI_PDEV_PEER_STA_PS_STATECHG_ENABLE,
+    /** Access category on which ARP frames are sent */
+    WMI_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
+    /** allow or disallow interbss frame forwarding */
+    WMI_PDEV_PARAM_BLOCK_INTERBSS,
+    /** Enable/Disable reset */
+    WMI_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
+    /** Enable/Disable/Set MSDU_TTL in milliseconds. */
+    WMI_PDEV_PARAM_SET_MSDU_TTL_CMDID,
+    /** Set global PPDU duration limit (usec). */
+    WMI_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
+    /** set txbf sounding period of vap in milliseconds */
+    WMI_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
+    /** Set promiscuous mode */
+    WMI_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
+    /** Set burst mode */
+    WMI_PDEV_PARAM_SET_BURST_MODE_CMDID,
+    /** enable enhanced stats */
+    WMI_PDEV_PARAM_EN_STATS,
+    /** Set mu-grouping policy */
+    WMI_PDEV_PARAM_MU_GROUP_POLICY,
+    /** Channel Hopping Enable */
+    WMI_PDEV_PARAM_NOISE_DETECTION,
+    /** Set Channel Hopping NF threshold in dBm */
+    WMI_PDEV_PARAM_NOISE_THRESHOLD,
+    /** Set PAPRD policy */
+    WMI_PDEV_PARAM_DPD_ENABLE,
+    /** Enable/disable mcast/bcast echo, used by ProxySTA */
+    WMI_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
+    /** ATF enable/disable strict schedule */
+    WMI_PDEV_PARAM_ATF_STRICT_SCH,
+    /** ATF set access category duration, B0-B29 duration, B30-B31: AC */
+    WMI_PDEV_PARAM_ATF_SCHED_DURATION,
+    /** Default antenna polarization */
+    WMI_PDEV_PARAM_ANT_PLZN,
+    /** Set mgmt retry limit */
+    WMI_PDEV_PARAM_MGMT_RETRY_LIMIT,
+    /** Set CCA sensitivity level in dBm */
+    WMI_PDEV_PARAM_SENSITIVITY_LEVEL,
+    /** Set 2G positive and negative Tx power in 0.5dBm units */
+    WMI_PDEV_PARAM_SIGNED_TXPOWER_2G,
+    /** Set 5G positive and negative Tx power in 0.5dBm
+     *  units */
+    WMI_PDEV_PARAM_SIGNED_TXPOWER_5G,
+    /** Enable/disble AMSDU for tids */
+    WMI_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
+    /** Enable/disable AMPDU for tids */
+    WMI_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
+    /** Set CCA threshold in dBm */
+    WMI_PDEV_PARAM_CCA_THRESHOLD,
+    /** RTS Fixed rate setting */
+    WMI_PDEV_PARAM_RTS_FIXED_RATE,
+    /** Pdev reset */
+    WMI_PDEV_PARAM_PDEV_RESET,
+    /** wapi mbssid offset **/
+    WMI_PDEV_PARAM_WAPI_MBSSID_OFFSET,
+    /** ARP DEBUG source address*/
+    WMI_PDEV_PARAM_ARP_DBG_SRCADDR,
+    /** ARP DEBUG destination address*/
+    WMI_PDEV_PARAM_ARP_DBG_DSTADDR,
+    /** ATF enable/disable obss noise scheduling */
+    WMI_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
+    /** ATF obss noise scaling factor */
+    WMI_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
+    /**
+     * TX power reduction scaling exponent - final tx power is the
+     * nominal tx power (A_MIN(reg_pow,ctl,etc..)) divided by
+     * 2^(scale exponent).  For example:
+     * If this scale exponent is  0, the power is unchanged (divided by 2^0)
+     * If this factor is 1, the power is scaled down by 2^1, i.e. 3 dB
+     * If this factor is 2, the power is scaled down by 2^2, i.e. 6 dB
+     * If this factor is 3, the power is scaled down by 2^3, i.e. 9 dB
+     */
+    WMI_PDEV_PARAM_CUST_TXPOWER_SCALE,
+    /** ATF enabe/disabe dynamically */
+    WMI_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
+    /** Set tx retry limit for control frames. 0 = disable, 31 = max */
+    WMI_PDEV_PARAM_CTRL_RETRY_LIMIT,
+    /** Set propagation delay for 2G / 5G band.
+     * The propagation delay is fundamentally a per-peer property, but
+     * the target may not support per-peer settings for ack timeouts.
+     * This pdev parameter allows the MAC-level ack timeout to be set to
+     * a value suitable for the worst-case propagation delay of any peer
+     * within that pdev.
+     * Units are microseconds.
+     */
+    WMI_PDEV_PARAM_PROPAGATION_DELAY,
+    /**
+     * Host can enable/disable ANT DIV feature
+     * if it's been enabled in BDF
+     */
+    WMI_PDEV_PARAM_ENA_ANT_DIV,
+    /** Host can force one chain to select a specific ANT */
+    WMI_PDEV_PARAM_FORCE_CHAIN_ANT,
+    /**
+     * Start a cycle ANT self test periodically.
+     * In the test, the FW would select each ANT pair
+     * one by one, the cycle time could be configured
+     * via WMI_PDEV_PARAM_ANT_DIV_SELFTEST_INTVL
+     */
+    WMI_PDEV_PARAM_ANT_DIV_SELFTEST,
+    /**
+     * Configure the cycle time of ANT self test,
+     * the unit is micro second. Per the timer
+     * limitation, too small value could be not so
+     * accurate.
+     */
+    WMI_PDEV_PARAM_ANT_DIV_SELFTEST_INTVL,
+    /**
+     * wlan stats observation period, the unit is millisecond.
+     * The value of 0 is used to turn off periodic stats report.
+     */
+    WMI_PDEV_PARAM_STATS_OBSERVATION_PERIOD,
+    /**
+     * Set tx_msdu_delay[] bin size to specify how many
+     * milliseconds each bin of the wmi_tx_stats.tx_msdu_delay[]
+     * histogram represents.
+     */
+    WMI_PDEV_PARAM_TX_DELAY_BIN_SIZE_MS,  
+    /** set wmi_tx_stats.tx_msdu_delay[] array size */
+    WMI_PDEV_PARAM_TX_DELAY_ARRAY_SIZE,    
+    /** set wmi_tx_stats.tx_mpdu_aggr[] array size */
+    WMI_PDEV_PARAM_TX_MPDU_AGGR_ARRAY_SIZE,    
+    /** set wmi_rx_stats.rx_mpdu_aggr[] array size */
+    WMI_PDEV_PARAM_RX_MPDU_AGGR_ARRAY_SIZE,
+
+} WMI_PDEV_PARAM;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_param_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    /** parameter id   */
+    A_UINT32 param_id;
+    /** parametr value */
+    A_UINT32 param_value;
+} wmi_pdev_set_param_cmd_fixed_param;
+
+/* param_value for param_id WMI_PDEV_PARAM_CTS_CBW */
+typedef enum {
+    WMI_CTS_CBW_INVALID = 0,
+    WMI_CTS_CBW_20,
+    WMI_CTS_CBW_40,
+    WMI_CTS_CBW_80,
+    WMI_CTS_CBW_80_80,
+    WMI_CTS_CBW_160,
+} WMI_CTS_CBW;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_tpc_config_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    /** parameter   */
+    A_UINT32 param;
+} wmi_pdev_get_tpc_config_cmd_fixed_param;
+
+#define WMI_FAST_DIVERSITY_BIT_OFFSET 0
+#define WMI_SLOW_DIVERSITY_BIT_OFFSET 1
+
+#define WMI_SLOW_DIVERSITY_CH0_WEIGHT_SHIFT 2
+#define WMI_SLOW_DIVERSITY_CH0_WEIGHT_MASK (0xf << WMI_SLOW_DIVERSITY_CH0_WEIGHT_SHIFT)
+#define WMI_SLOW_DIVERSITY_CH0_WEIGHT_GET_BITS(word32) \
+    (((word32) & WMI_SLOW_DIVERSITY_CH0_WEIGHT_MASK) >> WMI_SLOW_DIVERSITY_CH0_WEIGHT_SHIFT)
+#define WMI_SLOW_DIVERSITY_CH0_WEIGHT_SET_BITS(word32, value) \
+    do { \
+        (word32) &= ~WMI_SLOW_DIVERSITY_CH0_WEIGHT_MASK; \
+        (word32) |= ((value) << WMI_SLOW_DIVERSITY_CH0_WEIGHT_SHIFT) & \
+            WMI_SLOW_DIVERSITY_CH0_WEIGHT_MASK; \
+    } while (0)
+
+#define WMI_SLOW_DIVERSITY_CH1_WEIGHT_SHIFT 6
+#define WMI_SLOW_DIVERSITY_CH1_WEIGHT_MASK (0xf << WMI_SLOW_DIVERSITY_CH1_WEIGHT_SHIFT)
+#define WMI_SLOW_DIVERSITY_CH1_WEIGHT_GET_BITS(word32) \
+    (((word32) & WMI_SLOW_DIVERSITY_CH1_WEIGHT_MASK) >> WMI_SLOW_DIVERSITY_CH1_WEIGHT_SHIFT)
+#define WMI_SLOW_DIVERSITY_CH1_WEIGHT_SET_BITS(word32, value) \
+    do { \
+        (word32) &= ~WMI_SLOW_DIVERSITY_CH1_WEIGHT_MASK; \
+        (word32) |= ((value) << WMI_SLOW_DIVERSITY_CH1_WEIGHT_SHIFT) & \
+            WMI_SLOW_DIVERSITY_CH1_WEIGHT_MASK; \
+    } while (0)
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_antenna_diversity_cmd_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    /**
+     * The following "value" field is divided into bit fields as follows:
+     *     bits | purpose
+     *     -----+---------------------------------------
+     *        0 | enable/disable FAST diversity
+     *        1 | enable/disable SLOW diversity
+     *      5:2 | chain0 slow-diversity weighting factor
+     *      9:6 | chain1 slow-diversity weighting factor
+     *     31:10| currenty unused (set to 0x0)
+     * Refer to the above WMI_[FAST/SLOW]_DIVERSITY constants.
+     */
+    A_UINT32 value;
+} wmi_pdev_set_antenna_diversity_cmd_fixed_param;
+
+#define WMI_MAX_RSSI_THRESHOLD_SUPPORTED 3
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rssi_breach_monitor_config_cmd_fixed_param */
+    A_UINT32 vdev_id; /* vdev_id, where RSSI monitoring will take place */
+    A_UINT32 request_id; /* host will configure request_id and firmware echo this id in RSSI_BREACH_EVENT */
+    A_UINT32 enabled_bitmap; /* bit [0-2] = low_rssi_breach_enabled[0-2] enabled, bit [3-5] = hi_rssi_breach_enabled[0-2] */
+    A_UINT32 low_rssi_breach_threshold[WMI_MAX_RSSI_THRESHOLD_SUPPORTED]; /* unit dBm. host driver to make sure [0] > [1] > [2] */
+    A_UINT32 hi_rssi_breach_threshold[WMI_MAX_RSSI_THRESHOLD_SUPPORTED]; /* unit dBm. host driver to make sure [0] < [1] < [2] */
+    A_UINT32 lo_rssi_reenable_hysteresis; /* unit dBm. once low rssi[] breached, same event bitmap will be generated only after signal gets better than this level. This value is adopted for all low_rssi_breach_threshold[3] */
+    A_UINT32 hi_rssi_reenable_histeresis;/* unit dBm. once hi rssi[] breached, same event bitmap will be generated only after signal gets worse than this level. This value is adopted for all hi_rssi_breach_threshold[3] */
+    A_UINT32 min_report_interval; /* After last event is generated, we wait until this interval to generate next event  */
+    A_UINT32 max_num_report; /* this is to suppress number of event to be generated */
+} wmi_rssi_breach_monitor_config_fixed_param;
+
+typedef struct {
+    /** parameter   */
+    A_UINT32 param;
+} wmi_pdev_dump_cmd;
+
+typedef enum {
+    PAUSE_TYPE_CHOP =           0x1, /** for MCC (switch channel), only vdev_map is valid */
+    PAUSE_TYPE_PS =             0x2, /** for peer station sleep in sap mode, only peer_id is valid */
+    PAUSE_TYPE_UAPSD =          0x3, /** for uapsd, only peer_id and tid_map are valid. */
+    PAUSE_TYPE_P2P_CLIENT_NOA = 0x4, /** only vdev_map is valid, actually only one vdev id is set at one time */
+    PAUSE_TYPE_P2P_GO_PS =      0x5, /** only vdev_map is valid, actually only one vdev id is set at one time */
+    PAUSE_TYPE_STA_ADD_BA =     0x6, /** only peer_id and tid_map are valid, actually only one tid is set at one time */
+    PAUSE_TYPE_AP_PS =          0x7, /** for pausing AP vdev when all the connected clients are in PS. only vdev_map is valid */
+    PAUSE_TYPE_IBSS_PS =        0x8, /** for pausing IBSS vdev when all the peers are in PS. only vdev_map is valid */
+    PAUSE_TYPE_CHOP_TDLS_OFFCHAN =  0x9, /** for TDLS offchannel MCC (switch channel), only vdev_map is valid, TDLS connection tracker needs to be notified */
+} wmi_tx_pause_type;
+
+typedef enum {
+    ACTION_PAUSE =     0x0,
+    ACTION_UNPAUSE =   0x1,
+} wmi_tx_pause_action;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 pause_type;
+    A_UINT32 action;
+    A_UINT32 vdev_map;
+    A_UINT32 peer_id;
+    A_UINT32 tid_map;
+} wmi_tx_pause_event_fixed_param;
+
+typedef enum {
+    WMI_MGMT_TX_COMP_TYPE_COMPLETE_OK = 0,
+    WMI_MGMT_TX_COMP_TYPE_DISCARD,
+    WMI_MGMT_TX_COMP_TYPE_INSPECT,
+    WMI_MGMT_TX_COMP_TYPE_COMPLETE_NO_ACK,
+    WMI_MGMT_TX_COMP_TYPE_MAX,
+} WMI_MGMT_TX_COMP_STATUS_TYPE;
+
+typedef struct {
+    A_UINT32    tlv_header;
+    A_UINT32    desc_id; /* from tx_send_cmd */
+    A_UINT32    status;  /* WMI_MGMT_TX_COMP_STATUS_TYPE */
+} wmi_mgmt_tx_compl_event_fixed_param;
+
+typedef struct {
+    A_UINT32    tlv_header;
+    A_UINT32    num_reports;
+    /* tlv for completion
+     * A_UINT32 desc_ids[num_reports]; <- from tx_send_cmd
+     * A_UINT32 status[num_reports];   <- WMI_MGMT_TX_COMP_STATUS_TYPE
+     */
+} wmi_mgmt_tx_compl_bundle_event_fixed_param;
+
+#define WMI_TPC_RATE_MAX            160
+/* WMI_TPC_TX_NUM_CHAIN macro can't be changed without breaking the WMI compatibility */
+#define WMI_TPC_TX_NUM_CHAIN        4
+
+typedef enum {
+    WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
+    WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
+    WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
+} WMI_TPC_CONFIG_EVENT_FLAG;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_tpc_config_event_fixed_param  */
+    A_UINT32 regDomain;
+    A_UINT32 chanFreq;
+    A_UINT32 phyMode;
+    A_UINT32 twiceAntennaReduction;
+    A_UINT32 twiceMaxRDPower;
+    A_INT32 twiceAntennaGain;
+    A_UINT32 powerLimit;
+    A_UINT32 rateMax;
+    A_UINT32 numTxChain;
+    A_UINT32 ctl;
+    A_UINT32 flags;
+    /* WMI_TPC_TX_NUM_CHAIN macro can't be changed without breaking the WMI compatibility */
+    A_INT8 maxRegAllowedPower[WMI_TPC_TX_NUM_CHAIN];
+    A_INT8 maxRegAllowedPowerAGCDD[WMI_TPC_TX_NUM_CHAIN][WMI_TPC_TX_NUM_CHAIN];
+    A_INT8 maxRegAllowedPowerAGSTBC[WMI_TPC_TX_NUM_CHAIN][WMI_TPC_TX_NUM_CHAIN];
+    A_INT8 maxRegAllowedPowerAGTXBF[WMI_TPC_TX_NUM_CHAIN][WMI_TPC_TX_NUM_CHAIN];
+     /** pdev_id for identifying the MAC
+      * See macros starting with WMI_PDEV_ID_ for values.
+      */
+    A_UINT32 pdev_id;
+/* This TLV is followed by a byte array:
+ *      A_UINT8 ratesArray[];
+ */
+} wmi_pdev_tpc_config_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_l1ss_track_event_fixed_param  */
+    A_UINT32 periodCnt;
+    A_UINT32 L1Cnt;
+    A_UINT32 L11Cnt;
+    A_UINT32 L12Cnt;
+    A_UINT32 L1Entry;
+    A_UINT32 L11Entry;
+    A_UINT32 L12Entry;
+     /** pdev_id for identifying the MAC
+      * See macros starting with WMI_PDEV_ID_ for values.
+      */
+    A_UINT32 pdev_id;
+} wmi_pdev_l1ss_track_event_fixed_param;
+
+typedef struct {
+    A_UINT32 len;
+    A_UINT32 msgref;
+    A_UINT32 segmentInfo;
+} wmi_pdev_seg_hdr_info;
+
+
+/*
+ * Transmit power scale factor.
+ *
+ */
+typedef enum {
+    WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
+    WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
+    WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
+    WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
+    WMI_TP_SCALE_MIN = 4, /* min, but still on   */
+    WMI_TP_SCALE_SIZE = 5, /* max num of enum     */
+} WMI_TP_SCALE;
+
+#define WMI_MAX_DEBUG_MESG (sizeof(A_UINT32) * 32)
+
+typedef struct {
+    /** message buffer, NULL terminated */
+    char bufp[WMI_MAX_DEBUG_MESG];
+} wmi_debug_mesg_event;
+
+enum {
+    /** P2P device */
+    VDEV_SUBTYPE_P2PDEV = 0,
+    /** P2P client */
+    VDEV_SUBTYPE_P2PCLI,
+    /** P2P GO */
+    VDEV_SUBTYPE_P2PGO,
+    /** BT3.0 HS */
+    VDEV_SUBTYPE_BT,
+};
+
+typedef struct {
+    /** idnore power , only use flags , mode and freq */
+    wmi_channel chan;
+} wmi_pdev_set_channel_cmd;
+
+typedef enum {
+    WMI_PKTLOG_EVENT_RX = 0x1,
+    WMI_PKTLOG_EVENT_TX = 0x2,
+    WMI_PKTLOG_EVENT_RCF = 0x4, /* Rate Control Find */
+    WMI_PKTLOG_EVENT_RCU = 0x8, /* Rate Control Update */
+    /* 0x10 used by deprecated DBG_PRINT */
+    WMI_PKTLOG_EVENT_SMART_ANTENNA = 0x20, /* To support Smart Antenna */
+    WMI_PKTLOG_EVENT_SW = 0x40, /* To support SW defined events */
+} WMI_PKTLOG_EVENT;
+
+typedef enum {
+    WMI_PKTLOG_ENABLE_AUTO  = 0, /* (default) FW will decide under what conditions to enable pktlog */
+    WMI_PKTLOG_ENABLE_FORCE = 1, /* pktlog unconditionally enabled */
+} WMI_PKTLOG_ENABLE;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_pktlog_enable_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    A_UINT32 evlist; /* WMI_PKTLOG_EVENT */
+    A_UINT32 enable; /* WMI_PKTLOG_ENABLE */
+} wmi_pdev_pktlog_enable_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_pktlog_disable_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_pktlog_disable_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mib_stats_enable_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    A_UINT32 enable_Mib; /** enable for mib stats collection. Stats are delivered to host in wmi_mib_stats structure.
+                          * If enable_Mib=1, stats collection is enabled. If enable_Mib=0, stats collection does not happen */
+} wmi_mib_stats_enable_cmd_fixed_param;
+
+/** Customize the DSCP (bit) to TID (0-7) mapping for QOS.
+ *  NOTE: This constant cannot be changed without breaking
+ *  WMI Compatibility. */
+
+#define WMI_DSCP_MAP_MAX    (64)
+/*
+ * @brief dscp_tid_map_cmdid - command to send the dscp to tid map to the target
+ * @details
+ * Create an API for sending the custom DSCP-to-TID map to the target
+ * If this is a request from the user space or from above the UMAC
+ * then the best place to implement this is in the umac_if_offload of the OL path.
+ * Provide a place holder for this API in the ieee80211com (ic).
+ *
+ * This API will be a function pointer in the ieee80211com (ic). Any user space calls for manually setting the DSCP-to-TID mapping
+ * in the target should be directed to the function pointer in the ic.
+ *
+ * Implementation details of the API to send the map to the target are as described-
+ *
+ * 1. The function will have 2 arguments- struct ieee80211com, DSCP-to-TID map.
+ *    DSCP-to-TID map is a one dimensional u_int32_t array of length 64 to accomodate
+ *    64 TID values for 2^6 (64) DSCP ids.
+ *    Example:
+ *      A_UINT32 dscp_tid_map[WMI_DSCP_MAP_MAX] = {
+ *                                  0, 0, 0, 0, 0, 0, 0, 0,
+ *                                  1, 1, 1, 1, 1, 1, 1, 1,
+ *                                  2, 2, 2, 2, 2, 2, 2, 2,
+ *                                  3, 3, 3, 3, 3, 3, 3, 3,
+ *                                  4, 4, 4, 4, 4, 4, 4, 4,
+ *                                  5, 5, 5, 5, 5, 5, 5, 5,
+ *                                  6, 6, 6, 6, 6, 6, 6, 6,
+ *                                  7, 7, 7, 7, 7, 7, 7, 7,
+ *                                };
+ *
+ * 2. Request for the WMI buffer of size equal to the size of the DSCP-to-TID map.
+ *
+ * 3. Copy the DSCP-to-TID map into the WMI buffer.
+ *
+ * 4. Invoke the wmi_unified_cmd_send to send the cmd buffer to the target with the
+ *    WMI_PDEV_SET_DSCP_TID_MAP_CMDID. Arguments to the wmi send cmd API
+ *    (wmi_unified_send_cmd) are wmi handle, cmd buffer, length of the cmd buffer and
+ *    the WMI_PDEV_SET_DSCP_TID_MAP_CMDID id.
+ *
+ */
+/* DEPRECATED - use VDEV level command instead
+ * (wmi_vdev_set_dscp_tid_map_cmd_fixed_param)
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_dscp_tid_map_cmd_fixed_param */
+    A_UINT32 reserved0; /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */
+    /* map indicating DSCP to TID conversion */
+    A_UINT32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
+} wmi_pdev_set_dscp_tid_map_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_dscp_tid_map_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    /** map indicating DSCP to TID conversion */
+    A_UINT32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
+    A_UINT32 enable_override;
+} wmi_vdev_set_dscp_tid_map_cmd_fixed_param;
+
+enum WMI_WAKE_GPIO_TYPE {
+    WMI_WAKE_GPIO_LOW = 1,
+    WMI_WAKE_GPIO_HIGH = 2,
+    WMI_WAKE_GPIO_RISING_EDGE = 3,
+    WMI_WAKE_GPIO_FALLING_EDGE = 4,
+};
+
+/**
+ * Set GPIO numbers used to wakeup host and wakeup target.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param */
+    A_UINT32 host_wakeup_gpio; /* gpio num used to wakeup host, 0xff disable wakeup gpio */
+    A_UINT32 host_wakeup_type; /* refer to WMI_WAKE_GPIO_TYPE */
+    A_UINT32 target_wakeup_gpio; /* gpio num used to wakeup target, 0xff disable wakeup gpio */
+    A_UINT32 target_wakeup_type; /* refer to WMI_WAKE_GPIO_TYPE */
+} WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param;
+
+/** Fixed rate (rate-code) for broadcast/ multicast data frames */
+/* @brief bcast_mcast_data_rate - set the rates for the bcast/ mcast frames
+ * @details
+ * Create an API for setting the custom rate for the MCAST and BCAST frames
+ * in the target. If this is a request from the user space or from above the UMAC
+ * then the best place to implement this is in the umac_if_offload of the OL path.
+ * Provide a place holder for this API in the ieee80211com (ic).
+ *
+ * Implementation details of the API to set custom rates for MCAST and BCAST in
+ * the target are as described-
+ *
+ * 1. The function will have 3 arguments-
+ *    vap structure,
+ *    MCAST/ BCAST identifier code,
+ *    8 bit rate code
+ *
+ * The rate-code is a 1-byte field in which:for given rate, nss and preamble
+ * b'7-b-6 indicate the preamble (0 OFDM, 1 CCK, 2, HT, 3 VHT)
+ * b'5-b'4 indicate the NSS (0 - 1x1, 1 - 2x2, 2 - 3x3)
+ * b'3-b'0 indicate the rate, which is indicated as follows:
+ *          OFDM :     0: OFDM 48 Mbps
+ *                     1: OFDM 24 Mbps
+ *                     2: OFDM 12 Mbps
+ *                     3: OFDM 6 Mbps
+ *                     4: OFDM 54 Mbps
+ *                     5: OFDM 36 Mbps
+ *                     6: OFDM 18 Mbps
+ *                     7: OFDM 9 Mbps
+ *         CCK (pream == 1)
+ *                     0: CCK 11 Mbps Long
+ *                     1: CCK 5.5 Mbps Long
+ *                     2: CCK 2 Mbps Long
+ *                     3: CCK 1 Mbps Long
+ *                     4: CCK 11 Mbps Short
+ *                     5: CCK 5.5 Mbps Short
+ *                     6: CCK 2 Mbps Short
+ *         HT/VHT (pream == 2/3)
+ *                     0..7: MCS0..MCS7 (HT)
+ *                     0..9: MCS0..MCS9 (VHT)
+ *
+ * 2. Invoke the wmi_unified_vdev_set_param_send to send the rate value
+ *    to the target.
+ *    Arguments to the API are-
+ *    wmi handle,
+ *    VAP interface id (av_if_id) defined in ol_ath_vap_net80211,
+ *    WMI_VDEV_PARAM_BCAST_DATA_RATE/ WMI_VDEV_PARAM_MCAST_DATA_RATE,
+ *    rate value.
+ */
+typedef enum {
+    WMI_SET_MCAST_RATE,
+    WMI_SET_BCAST_RATE
+} MCAST_BCAST_RATE_ID;
+
+typedef struct {
+    MCAST_BCAST_RATE_ID rate_id;
+    A_UINT32 rate;
+} mcast_bcast_rate;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wmm_params */
+    A_UINT32 cwmin;
+    A_UINT32 cwmax;
+    A_UINT32 aifs;
+    A_UINT32 txoplimit;
+    A_UINT32 acm;
+    A_UINT32 no_ack;
+} wmi_wmm_params;
+
+/* DEPRECATED - use VDEV level command instead
+ * (wmi_vdev_set_wmm_params_cmd_fixed_param)
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_wmm_params_cmd_fixed_param */
+    A_UINT32 reserved0; /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */
+    A_UINT32 dg_type;
+
+/* The TLVs for the 4 AC follows:
+ *     wmi_wmm_params wmm_params_ac_be;
+ *     wmi_wmm_params wmm_params_ac_bk;
+ *     wmi_wmm_params wmm_params_ac_vi;
+ *     wmi_wmm_params wmm_params_ac_vo;
+ */
+} wmi_pdev_set_wmm_params_cmd_fixed_param;
+
+typedef enum {
+    WMI_REQUEST_PEER_STAT      = 0x01,
+    WMI_REQUEST_AP_STAT        = 0x02,
+    WMI_REQUEST_PDEV_STAT      = 0x04,
+    WMI_REQUEST_VDEV_STAT      = 0x08,
+    WMI_REQUEST_BCNFLT_STAT    = 0x10,
+    WMI_REQUEST_VDEV_RATE_STAT = 0x20,
+    WMI_REQUEST_INST_STAT      = 0x40,
+    WMI_REQUEST_MIB_STAT       = 0x80,
+    WMI_REQUEST_RSSI_PER_CHAIN_STAT = 0x100,
+} wmi_stats_id;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param */
+    wmi_stats_id stats_id;
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_request_stats_cmd_fixed_param;
+
+/* stats type bitmap  */
+#define WMI_LINK_STATS_RADIO         0x00000001
+#define WMI_LINK_STATS_IFACE         0x00000002
+#define WMI_LINK_STATS_ALL_PEER      0x00000004
+#define WMI_LINK_STATS_PER_PEER      0x00000008
+
+
+/* wifi clear statistics bitmap  */
+#define WIFI_STATS_RADIO              0x00000001 /** all radio statistics */
+#define WIFI_STATS_RADIO_CCA          0x00000002 /** cca_busy_time (within radio statistics) */
+#define WIFI_STATS_RADIO_CHANNELS     0x00000004 /** all channel statistics (within radio statistics) */
+#define WIFI_STATS_RADIO_SCAN         0x00000008 /** all scan statistics (within radio statistics) */
+#define WIFI_STATS_IFACE              0x00000010 /** all interface statistics */
+#define WIFI_STATS_IFACE_TXRATE       0x00000020 /** all tx rate statistics (within interface statistics) */
+#define WIFI_STATS_IFACE_AC           0x00000040 /** all ac statistics (within interface statistics) */
+#define WIFI_STATS_IFACE_CONTENTION   0x00000080 /** all contention (min, max, avg) statistics (within ac statisctics) */
+#define WMI_STATS_IFACE_ALL_PEER      0x00000100 /** All peer stats on this interface */
+#define WMI_STATS_IFACE_PER_PEER      0x00000200 /** Clear particular peer stats depending on the peer_mac */
+
+/** Default value for stats if the stats collection has not started */
+#define WMI_STATS_VALUE_INVALID       0xffffffff
+
+#define WMI_DIAG_ID_GET(diag_events_logs)                         WMI_GET_BITS(diag_events_logs, 0, 16)
+#define WMI_DIAG_ID_SET(diag_events_logs, value)                  WMI_SET_BITS(diag_events_logs, 0, 16, value)
+#define WMI_DIAG_TYPE_GET(diag_events_logs)                       WMI_GET_BITS(diag_events_logs, 16, 1)
+#define WMI_DIAG_TYPE_SET(diag_events_logs, value)                WMI_SET_BITS(diag_events_logs, 16, 1, value)
+#define WMI_DIAG_ID_ENABLED_DISABLED_GET(diag_events_logs)        WMI_GET_BITS(diag_events_logs, 17, 1)
+#define WMI_DIAG_ID_ENABLED_DISABLED_SET(diag_events_logs, value) WMI_SET_BITS(diag_events_logs, 17, 1, value)
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_diag_event_log_config_fixed_param */
+    A_UINT32 num_of_diag_events_logs;
+/* The TLVs will follow.
+ *    A_UINT32 diag_events_logs_list[]; 0-15 Bits Diag EVENT/LOG ID,
+ *                                      Bit 16 - DIAG type EVENT/LOG, 0 - Event, 1 - LOG
+ *                                      Bit 17 Indicate if the DIAG type is Enabled/Disabled.
+ */
+} wmi_diag_event_log_config_fixed_param;
+
+#define WMI_DIAG_FREQUENCY_GET(diag_events_logs)          WMI_GET_BITS(diag_events_logs, 17, 1)
+#define WMI_DIAG_FREQUENCY_SET(diag_events_logs, value)   WMI_SET_BITS(diag_events_logs, 17, 1, value)
+#define WMI_DIAG_EXT_FEATURE_GET(diag_events_logs)        WMI_GET_BITS(diag_events_logs, 18, 1)
+#define WMI_DIAG_EXT_FEATURE_SET(diag_events_logs, value) WMI_SET_BITS(diag_events_logs, 18, 1, value)
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 num_of_diag_events_logs;
+/* The TLVs will follow.
+ *    A_UINT32 diag_events_logs_list[]; 0-15 Bits Diag EVENT/LOG ID,
+ *                                      Bit 16 - DIAG type EVENT/LOG, 0 - Event, 1 - LOG
+ *                                      Bit 17 - Frequncy of the DIAG EVENT/LOG High Frequency -1, Low Frequency - 0
+ *                                      Bit 18 - Set if the EVENTS/LOGs are used for EXT DEBUG Framework
+ */
+} wmi_diag_event_log_supported_event_fixed_params;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_debug_mesg_flush_fixed_param*/
+    A_UINT32 reserved0; /** placeholder for future */
+} wmi_debug_mesg_flush_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_debug_mesg_flush_complete_fixed_param*/
+    A_UINT32 reserved0; /** placeholder for future */
+} wmi_debug_mesg_flush_complete_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rssi_breach_fixed_param */
+    /* vdev_id, where RSSI breach event occurred */
+    A_UINT32 vdev_id;
+    /* request id */
+    A_UINT32 request_id;
+    /* bitmap[0-2] is corresponding to low_rssi[0-2]. bitmap[3-5] is corresponding to hi_rssi[0-2]*/
+    A_UINT32 event_bitmap;
+    /* rssi at the time of RSSI breach. Unit dBm */
+    A_UINT32 rssi;
+    /* bssid of the monitored AP's */
+    wmi_mac_addr bssid;
+} wmi_rssi_breach_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_fw_mem_dump */
+    /** unique id identifying the segment */
+    A_UINT32 seg_id;
+    /** Start address of the segment to be read */
+    A_UINT32 seg_start_addr_lo;
+    A_UINT32 seg_start_addr_hi;
+    /** Length of the segment to be read */
+    A_UINT32 seg_length;
+    /** Host bufeer address to which the segment will be read and dumped */
+    A_UINT32 dest_addr_lo;
+    A_UINT32 dest_addr_hi;
+} wmi_fw_mem_dump;
+
+/* Command to get firmware memory dump*/
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_get_fw_mem_dump_fixed_param */
+    /** unique id identifying the request */
+    A_UINT32 request_id;
+    /** number of memory dump segments */
+    A_UINT32 num_fw_mem_dump_segs;
+/**
+ * This TLV is followed by another TLV
+ *     wmi_fw_mem_dump fw_mem_dump[];
+ */
+} wmi_get_fw_mem_dump_fixed_param;
+
+/** Event to indicate the completion of fw mem dump */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_update_fw_mem_dump_fixed_param */
+    /** unique id identifying the request, given in the request stats command */
+    A_UINT32 request_id;
+    /*In case of Firmware memory dump */
+    A_UINT32 fw_mem_dump_complete;
+} wmi_update_fw_mem_dump_fixed_param;
+
+
+typedef enum {
+    WMI_ROAMING_IDLE = 0,
+    WMI_ROAMING_ACTIVE = 1,
+} wmi_roam_state;
+
+/* access categories */
+typedef enum {
+   WMI_AC_VO  = 0,
+   WMI_AC_VI  = 1,
+   WMI_AC_BE  = 2,
+   WMI_AC_BK  = 3,
+   WMI_AC_MAX = 4,
+} wmi_traffic_ac;
+
+typedef enum {
+    WMI_STA_STATS = 0,
+    WMI_SOFTAP_STATS = 1,
+    WMI_IBSS_STATS = 2,
+    WMI_P2P_CLIENT_STATS = 3,
+    WMI_P2P_GO_STATS = 4,
+    WMI_NAN_STATS = 5,
+    WMI_MESH_STATS = 6,
+ } wmi_link_iface_type;
+
+/* channel operating width */
+typedef enum {
+    WMI_CHAN_WIDTH_20    = 0,
+    WMI_CHAN_WIDTH_40    = 1,
+    WMI_CHAN_WIDTH_80    = 2,
+    WMI_CHAN_WIDTH_160   = 3,
+    WMI_CHAN_WIDTH_80P80 = 4,
+    WMI_CHAN_WIDTH_5     = 5,
+    WMI_CHAN_WIDTH_10    = 6,
+} wmi_channel_width;
+
+/*Clear stats*/
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_clear_link_stats_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** stop_stats_collection_req = 1 will imply stop the statistics collection */
+    A_UINT32 stop_stats_collection_req;
+    /** identifies what stats to be cleared */
+    A_UINT32 stats_clear_req_mask;
+    /** identifies which peer stats to be cleared. Valid only while clearing PER_REER */
+    wmi_mac_addr peer_macaddr;
+} wmi_clear_link_stats_cmd_fixed_param;
+
+/* Link Stats configuration params. Trigger the link layer statistics collection*/
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_start_link_stats_cmd_fixed_param */
+    /** threshold to classify the pkts as short or long */
+    A_UINT32 mpdu_size_threshold;
+    /** set for field debug mode. Driver should collect all statistics regardless of performance impact.*/
+    A_UINT32 aggressive_statistics_gathering;
+} wmi_start_link_stats_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_request_link_stats_cmd_fixed_param */
+    /** Type of stats required. This is a bitmask WMI_LINK_STATS_RADIO, WMI_LINK_STATS_IFACE */
+    A_UINT32 stats_type;
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** unique id identifying the request, generated by the caller */
+    A_UINT32 request_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_request_link_stats_cmd_fixed_param;
+
+/* channel statistics */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel_stats */
+    /** Channel width (20, 40, 80, 80+80, 160) enum wmi_channel_width*/
+    A_UINT32 channel_width;
+    /** Primary 20 MHz channel */
+    A_UINT32 center_freq;
+    /** center frequency (MHz) first segment */
+    A_UINT32 center_freq0;
+    /** center frequency (MHz) second segment */
+    A_UINT32 center_freq1;
+    /** msecs the radio is awake (32 bits number accruing over time) */
+    A_UINT32 radio_awake_time;
+    /** msecs the CCA register is busy (32 bits number accruing over time) */
+    A_UINT32 cca_busy_time;
+} wmi_channel_stats;
+
+/*
+ * Each step represents 0.5 dB.  The starting value is 0 dBm.
+ * Thus the TPC levels cover 0 dBm to 31.5 dBm inclusive in 0.5 dB steps.
+ */
+#define MAX_TPC_LEVELS 64
+
+/* radio statistics */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_radio_link_stats */
+    /** Wifi radio (if multiple radio supported) */
+    A_UINT32 radio_id;
+    /** msecs the radio is awake (32 bits number accruing over time) */
+    A_UINT32 on_time;
+    /** msecs the radio is transmitting (32 bits number accruing over time) */
+    A_UINT32 tx_time;
+    /** msecs the radio is in active receive (32 bits number accruing over time) */
+    A_UINT32 rx_time;
+    /** msecs the radio is awake due to all scan (32 bits number accruing over time) */
+    A_UINT32 on_time_scan;
+    /** msecs the radio is awake due to NAN (32 bits number accruing over time) */
+    A_UINT32 on_time_nbd;
+    /** msecs the radio is awake due to G?scan (32 bits number accruing over time) */
+    A_UINT32 on_time_gscan;
+    /** msecs the radio is awake due to roam?scan (32 bits number accruing over time) */
+    A_UINT32 on_time_roam_scan;
+    /** msecs the radio is awake due to PNO scan (32 bits number accruing over time) */
+    A_UINT32 on_time_pno_scan;
+    /** msecs the radio is awake due to HS2.0 scans and GAS exchange (32 bits number accruing over time) */
+    A_UINT32 on_time_hs20;
+    /** number of channels */
+    A_UINT32 num_channels;
+    /** tx time per TPC level - DEPRECATED
+     * This field is deprecated.
+     * It is superseded by the WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID message.
+     */
+    A_UINT32 tx_time_per_tpc[MAX_TPC_LEVELS];
+} wmi_radio_link_stats;
+
+/** tx time per power level statistics */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tx_power_level_stats_evt_fixed_param */
+    /** total number of tx power levels */
+    A_UINT32 total_num_tx_power_levels;
+    /** number of tx power levels that are carried in this event */
+    A_UINT32 num_tx_power_levels;
+    /** offset of current stats
+     * If ((num_tx_power_levels + power_level_offset)) ==
+     *     total_num_tx_power_levels)
+     * this message completes the report of tx time per power levels.
+     * Otherwise, additional WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID messages
+     * will be sent by the target to deliver the remainder of the tx time
+     * per power level stats.
+     */
+    A_UINT32 power_level_offset;
+/*
+ * This TLV will be followed by a TLV containing a variable-length array of
+ * A_UINT32 with tx time per power level data
+ *  A_UINT32 tx_time_per_power_level[num_tx_power_levels]
+ * The tx time is in units of milliseconds.
+ * The power levels are board-specific values; a board-specific translation
+ * has to be applied to determine what actual power corresponds to each
+ * power level.
+ * Just as the host has a BDF file available, the host should also have
+ * a data file available that provides the power level to power translations.
+ */
+} wmi_tx_power_level_stats_evt_fixed_param;
+
+
+/** Radio statistics (once started) do not stop or get reset unless wifi_clear_link_stats is invoked */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stats_event_fixed_param */
+    /** unique id identifying the request, given in the request stats command */
+    A_UINT32 request_id;
+    /** Number of radios*/
+    A_UINT32 num_radio;
+    /** more_data will be set depending on the number of radios */
+    A_UINT32 more_radio_events;
+/*
+ * This TLV is followed by another TLV of array of bytes
+ *   size of(struct wmi_radio_link_stats);
+ *
+ * This TLV is followed by another TLV of array of bytes
+ *   num_channels * size of(struct wmi_channel_stats)
+ */
+
+} wmi_radio_link_stats_event_fixed_param;
+
+/* per rate statistics */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rate_stats */
+    /** rate information
+     * The rate-code is a 1-byte field in which:for given rate, nss and preamble
+     * b'7-b-6 indicate the preamble (0 OFDM, 1 CCK, 2, HT, 3 VHT)
+     * b'5-b'4 indicate the NSS (0 - 1x1, 1 - 2x2, 2 - 3x3)
+     * b'3-b'0 indicate the rate, which is indicated as follows:
+     *          OFDM :     0: OFDM 48 Mbps
+     *                     1: OFDM 24 Mbps
+     *                     2: OFDM 12 Mbps
+     *                     3: OFDM 6 Mbps
+     *                     4: OFDM 54 Mbps
+     *                     5: OFDM 36 Mbps
+     *                     6: OFDM 18 Mbps
+     *                     7: OFDM 9 Mbps
+     *         CCK (pream == 1)
+     *                     0: CCK 11 Mbps Long
+     *                     1: CCK 5.5 Mbps Long
+     *                     2: CCK 2 Mbps Long
+     *                     3: CCK 1 Mbps Long
+     *                     4: CCK 11 Mbps Short
+     *                     5: CCK 5.5 Mbps Short
+     *                     6: CCK 2 Mbps Short
+     *         HT/VHT (pream == 2/3)
+     *                     0..7: MCS0..MCS7 (HT)
+     *                     0..9: MCS0..MCS9 (VHT)
+     */
+    A_UINT32 rate;
+    /** units of 100 Kbps */
+    A_UINT32 bitrate;
+    /** number of successfully transmitted data pkts (ACK rcvd) */
+    A_UINT32 tx_mpdu;
+    /** number of received data pkts */
+    A_UINT32 rx_mpdu;
+    /** number of data packet losses (no ACK) */
+    A_UINT32 mpdu_lost;
+    /** total number of data pkt retries */
+    A_UINT32 retries;
+    /** number of short data pkt retries */
+    A_UINT32 retries_short;
+    /** number of long data pkt retries */
+    A_UINT32 retries_long;
+} wmi_rate_stats;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_link_stats */
+    /** peer type (AP, TDLS, GO etc.) enum wmi_peer_type*/
+    A_UINT32 peer_type;
+    /** mac address */
+    wmi_mac_addr peer_mac_address;
+    /** peer wmi_CAPABILITY_XXX */
+    A_UINT32 capabilities;
+    /** number of rates */
+    A_UINT32 num_rates;
+} wmi_peer_link_stats;
+
+/** PEER statistics (once started) reset and start afresh after each connection */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_stats_event_fixed_param */
+    /** unique id identifying the request, given in the request stats command */
+	A_UINT32 request_id;
+	/** number of peers accomidated in this particular event  */
+	A_UINT32 num_peers;
+	/** Indicates the fragment number  */
+	A_UINT32 peer_event_number;
+	/** Indicates if there are more peers which will be sent as seperate peer_stats event */
+	A_UINT32 more_data;
+
+/**
+ * This TLV is followed by another TLV
+ * num_peers * size of(struct wmi_peer_stats)
+ * num_rates * size of(struct wmi_rate_stats). num_rates is the sum of the rates of all the peers.
+ */
+} wmi_peer_stats_event_fixed_param;
+
+/* per access category statistics */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wmm_ac_stats */
+    /** access category (VI, VO, BE, BK) enum wmi_traffic_ac*/
+    A_UINT32 ac_type;
+    /** number of successfully transmitted unicast data pkts (ACK rcvd) */
+    A_UINT32 tx_mpdu;
+    /** number of received unicast mpdus */
+    A_UINT32 rx_mpdu;
+    /** number of succesfully transmitted multicast data packets */
+    /** STA case: implies ACK received from AP for the unicast packet in which mcast pkt was sent */
+    A_UINT32 tx_mcast;
+    /** number of received multicast data packets */
+    A_UINT32 rx_mcast;
+    /** number of received unicast a-mpdus */
+    A_UINT32 rx_ampdu;
+    /** number of transmitted unicast a-mpdus */
+    A_UINT32 tx_ampdu;
+    /** number of data pkt losses (no ACK) */
+    A_UINT32 mpdu_lost;
+    /** total number of data pkt retries */
+    A_UINT32 retries;
+    /** number of short data pkt retries */
+    A_UINT32 retries_short;
+    /** number of long data pkt retries */
+    A_UINT32 retries_long;
+    /** data pkt min contention time (usecs) */
+    A_UINT32 contention_time_min;
+    /** data pkt max contention time (usecs) */
+    A_UINT32 contention_time_max;
+    /** data pkt avg contention time (usecs) */
+    A_UINT32 contention_time_avg;
+    /** num of data pkts used for contention statistics */
+    A_UINT32 contention_num_samples;
+} wmi_wmm_ac_stats;
+
+/* interface statistics */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_iface_link_stats */
+    /** access point beacon received count from connected AP */
+    A_UINT32 beacon_rx;
+    /** access point mgmt frames received count from connected AP (including Beacon) */
+    A_UINT32 mgmt_rx;
+    /** action frames received count */
+    A_UINT32 mgmt_action_rx;
+    /** action frames transmit count */
+    A_UINT32 mgmt_action_tx;
+    /** access Point Beacon and Management frames RSSI (averaged) */
+    A_UINT32 rssi_mgmt;
+    /** access Point Data Frames RSSI (averaged) from connected AP */
+    A_UINT32 rssi_data;
+    /** access Point ACK RSSI (averaged) from connected AP */
+    A_UINT32 rssi_ack;
+    /** number of peers */
+    A_UINT32 num_peers;
+	/** Indicates how many peer_stats events will be sent depending on the num_peers. */
+    A_UINT32 num_peer_events;
+    /** number of ac */
+    A_UINT32 num_ac;
+    /** Roaming Stat */
+    A_UINT32 roam_state;
+    /** Average Beacon spread offset is the averaged time delay between TBTT and beacon TSF */
+    /** Upper 32 bits of averaged 64 bit beacon spread offset */
+    A_UINT32 avg_bcn_spread_offset_high;
+    /** Lower 32 bits of averaged 64 bit beacon spread offset */
+    A_UINT32 avg_bcn_spread_offset_low;
+    /** Takes value of 1 if AP leaks packets after sending an ACK for PM=1 otherwise 0 */
+    A_UINT32 is_leaky_ap;
+    /** Average number of frames received from AP after receiving the ACK for a frame with PM=1 */
+    A_UINT32 avg_rx_frms_leaked;
+    /** Rx leak watch window currently in force to minimize data loss because of leaky AP. Rx leak window is the
+        time driver waits before shutting down the radio or switching the channel and after receiving an ACK for
+        a data frame with PM bit set) */
+    A_UINT32 rx_leak_window;
+} wmi_iface_link_stats;
+
+/** Interface statistics (once started) reset and start afresh after each connection */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_iface_link_stats_event_fixed_param */
+    /** unique id identifying the request, given in the request stats command */
+	A_UINT32 request_id;
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+/*
+ * This TLV is followed by another TLV
+ *   wmi_iface_link_stats iface_link_stats;
+ *   num_ac * size of(struct wmi_wmm_ac_stats)
+ */
+} wmi_iface_link_stats_event_fixed_param;
+
+/** Suspend option */
+enum {
+    WMI_PDEV_SUSPEND, /* suspend */
+    WMI_PDEV_SUSPEND_AND_DISABLE_INTR, /* suspend and disable all interrupts */
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_suspend_cmd_fixed_param  */
+    /* suspend option sent to target */
+    A_UINT32 pdev_id; /** pdev_id for identifying the MAC, See macros starting with WMI_PDEV_ID_ for values. */
+    A_UINT32 suspend_opt;
+} wmi_pdev_suspend_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_resume_cmd_fixed_param  */
+    A_UINT32 pdev_id; /** pdev_id for identifying the MAC, See macros starting with WMI_PDEV_ID_ for values. */
+} wmi_pdev_resume_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_rate_stats_event_fixed_param,  */
+    A_UINT32 num_vdev_stats; /* number of vdevs */
+} wmi_vdev_rate_stats_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len, tag equals WMITLV_TAG_STRUC_wmi_vdev_rate_ht_info*/
+    A_UINT32 vdevid; /* Id of the wlan vdev*/
+    A_UINT32 tx_nss; /* Bit 28 of tx_rate_kbps has this info - based on last data packet transmitted*/
+    A_UINT32 rx_nss; /* Bit 24 of rx_rate_kbps - same as above*/
+    A_UINT32 tx_preamble; /* Bits 30-29 from tx_rate_kbps */
+    A_UINT32 rx_preamble; /* Bits 26-25 from rx_rate_kbps */
+} wmi_vdev_rate_ht_info;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stats_event_fixed_param */
+    wmi_stats_id stats_id;
+    /** number of pdev stats event structures (wmi_pdev_stats) 0 or 1 */
+    A_UINT32 num_pdev_stats;
+    /** number of vdev stats event structures  (wmi_vdev_stats) 0 or max vdevs */
+    A_UINT32 num_vdev_stats;
+    /** number of peer stats event structures  (wmi_peer_stats) 0 or max peers */
+    A_UINT32 num_peer_stats;
+    A_UINT32 num_bcnflt_stats;
+    /** number of chan stats event structures  (wmi_chan_stats) 0 to MAX MCC CHANS */
+    A_UINT32 num_chan_stats;
+    /** number of MIB stats event structures (wmi_mib_stats) */
+    A_UINT32 num_mib_stats;
+/* This TLV is followed by another TLV of array of bytes
+ *   A_UINT8 data[];
+ *  This data array contains
+ *   num_pdev_stats * size of(struct wmi_pdev_stats)
+ *   num_vdev_stats * size of(struct wmi_vdev_stats)
+ *   num_peer_stats * size of(struct wmi_peer_stats)
+ *   num_bcnflt_stats * size_of()
+ *   num_chan_stats * size of(struct wmi_chan_stats)
+ *   num_mib_stats * size of(struct wmi_mib_stats)
+ *
+ */
+} wmi_stats_event_fixed_param;
+
+/* WLAN channel CCA stats bitmap  */
+#define WLAN_STATS_IDLE_TIME_SHIFT              0
+#define WLAN_STATS_IDLE_TIME_TIME               0x00000001
+
+#define WLAN_STATS_TX_TIME_SHIFT                1
+#define WLAN_STATS_TX_TIME_MASK                 0x00000002
+
+#define WLAN_STATS_RX_IN_BSS_TIME_SHIFT         2
+#define WLAN_STATS_RX_IN_BSS_TIME_MASK          0x00000004
+
+#define WLAN_STATS_RX_OUT_BSS_TIME_SHIFT        3
+#define WLAN_STATS_RX_OUT_BSS_TIME_MASK         0x00000008
+
+#define WLAN_STATS_RX_BUSY_TIME_SHIFT           4
+#define WLAN_STATS_RX_BUSY_TIME_MASK            0x00000010
+
+#define WLAN_STATS_RX_IN_BAD_COND_TIME_SHIFT    5
+#define WLAN_STATS_RX_IN_BAD_COND_TIME_MASK     0x00000020
+
+#define WLAN_STATS_TX_IN_BAD_COND_TIME_SHIFT    6
+#define WLAN_STATS_TX_IN_BAD_COND_TIME_MASK     0x00000040
+
+#define WLAN_STATS_WLAN_NOT_AVAIL_TIME_SHIFT    7
+#define WLAN_STATS_WLAN_NOT_AVAIL_TIME_MASK     0x00000080
+
+/* WLAN peer signal stats bitmap  */
+#define WLAN_STATS_PER_ANT_SNR_SHIFT            0
+#define WLAN_STATS_PER_ANT_SNR_MASK             0x00000001
+
+#define WLAN_STATS_NF_SHIFT                     1
+#define WLAN_STATS_NF_MASK                      0x00000002
+
+/* WLAN TX stats bitmap  */
+#define WLAN_STATS_TX_MSDUS_SHIFT              0
+#define WLAN_STATS_TX_MSDUS_MASK               0x00000001
+
+#define WLAN_STATS_TX_BYTES_SHIFT              1
+#define WLAN_STATS_TX_BYTES_MASK               0x00000002
+
+#define WLAN_STATS_TX_MSDU_DROPS_SHIFT         2
+#define WLAN_STATS_TX_MSDU_DROPS_MASK          0x00000004
+
+#define WLAN_STATS_TX_DROP_BYTES_SHIFT         3
+#define WLAN_STATS_TX_DROP_BYTES_MASK          0x00000008
+
+#define WLAN_STATS_TX_MPDU_RETRIES_SHIFT       4
+#define WLAN_STATS_TX_MPDU_RETRIES_MASK        0x00000010
+
+#define WLAN_STATS_TX_MSDU_FAILED_SHIFT        5
+#define WLAN_STATS_TX_MSDU_FAILED_MASK         0x00000020
+
+#define WLAN_STATS_TX_MPDU_AGGR_SHIFT          6
+#define WLAN_STATS_TX_MPDU_AGGR_MASK           0x00000040
+
+#define WLAN_STATS_TX_MSDU_ACKED_MCS_SHIFT     7
+#define WLAN_STATS_TX_MSDU_ACKED_MCS_MASK      0x00000080
+
+#define WLAN_STATS_TX_MSDU_FAILED_MCS_SHIFT    8
+#define WLAN_STATS_TX_MSDU_FAILED_MCS_MASK     0x00000100
+
+#define WLAN_STATS_TX_MSDU_DELAY_SHIFT         9
+#define WLAN_STATS_TX_MSDU_DELAY_MASK          0x00000200
+
+/* WLAN RX stats bitmap  */
+#define WLAN_STATS_MAC_RX_MSDUS_SHIFT       0
+#define WLAN_STATS_MAC_RX_MSDUS_MASK        0x00000001
+
+#define WLAN_STATS_MAC_RX_BYTES_SHIFT       1
+#define WLAN_STATS_MAC_RX_BYTES_MASK        0x00000002
+
+#define WLAN_STATS_PHY_RX_MSDUS_SHIFT       2
+#define WLAN_STATS_PHY_RX_MSDUS_MASK        0x00000004
+
+#define WLAN_STATS_PHY_RX_BYTES_SHIFT       3
+#define WLAN_STATS_PHY_RX_BYTES_MASK        0x00000008
+
+#define WLAN_STATS_SEQ_DCONT_NUM_SHIFT      4
+#define WLAN_STATS_SEQ_DCONT_NUM_MASK       0x00000010
+
+#define WLAN_STATS_RX_MSDU_RETRY_SHIFT      5
+#define WLAN_STATS_RX_MSDU_RETRY_MASK       0x00000020
+
+#define WLAN_STATS_RX_MSDU_DUP_SHIFT        6
+#define WLAN_STATS_RX_MSDU_DUP_MASK         0x00000040
+
+#define WLAN_STATS_RX_MSDU_DISCARD_SHIFT    7
+#define WLAN_STATS_RX_MSDU_DISCARD_MASK     0x00000080
+
+#define WLAN_STATS_STA_PS_INDS_SHIFT        8
+#define WLAN_STATS_STA_PS_INDS_MASK         0x00000100
+
+#define WLAN_STATS_STA_PS_DURS_SHIFT        9
+#define WLAN_STATS_STA_PS_DURS_MASK         0x00000200
+
+#define WLAN_STATS_RX_PROBE_REQS_SHIFT      10
+#define WLAN_STATS_RX_PROBE_REQS_MASK       0x00000400
+
+#define WLAN_STATS_RX_OTH_MGMTS_SHIFT       11
+#define WLAN_STATS_RX_OTH_MGMTS_MASK        0x00000800
+
+#define WLAN_STATS_RX_MPDU_AGGR_SHIFT       12
+#define WLAN_STATS_RX_MPDU_AGGR_MASK        0x00001000
+
+#define WLAN_STATS_RX_MSDU_MCS_SHIFT        13
+#define WLAN_STATS_RX_MSDU_MCS_MASK         0x00002000
+
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chan_cca_stats */
+    A_UINT32 vdev_id;
+    /** Percentage of idle time, no TX, no RX, no interference */
+    A_UINT32 idle_time;
+    /** Percentage of time transmitting packets */
+    A_UINT32 tx_time;
+    /** Percentage of time receiving packets in current BSSs */
+    A_UINT32 rx_in_bss_time;
+    /** Percentage of time receiving packets not in current BSSs */
+    A_UINT32 rx_out_bss_time;
+    /** Percentage of time interference detected. */
+    A_UINT32 rx_busy_time;
+    /** Percentage of time receiving packets with errors
+     * or packets flagged as retransmission or seqnum discontinued. */
+    A_UINT32 rx_in_bad_cond_time;
+    /** Percentage of time the device transmitted packets that haven't been ACKed. */
+    A_UINT32 tx_in_bad_cond_time;
+    /** Percentage of time the chip is unable to work in normal conditions. */
+    A_UINT32 wlan_not_avail_time;
+} wmi_chan_cca_stats;
+
+/** Thresholds of cca stats, stands for percentages of stats variation.
+ *  Check wmi_chan_cca_stats for each stats's meaning.
+ */
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chan_cca_stats_thresh */
+    A_UINT32 idle_time;           /* units = percent */
+    A_UINT32 tx_time;             /* units = percent */
+    A_UINT32 rx_in_bss_time;      /* units = percent */
+    A_UINT32 rx_out_bss_time;     /* units = percent */
+    A_UINT32 rx_busy_time;        /* units = percent */
+    A_UINT32 rx_in_bad_cond_time; /* units = percent */
+    A_UINT32 tx_in_bad_cond_time; /* units = percent */
+    A_UINT32 wlan_not_avail_time; /* units = percent */
+} wmi_chan_cca_stats_thresh;
+
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_signal_stats */
+    A_UINT32 vdev_id;
+    A_UINT32 peer_id;
+    /** per antenna SNR in current bss, units are dB */
+    A_INT32 per_ant_snr[WMI_MAX_CHAINS];
+    /** Background noise, units are dBm */
+    A_INT32 nf;
+} wmi_peer_signal_stats;
+
+/** Thresholds of signal stats, stand for percentage of stats variation.
+ *  Check wmi_peer_signal_stats for each stats's meaning.
+ */
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_signal_stats_thresh */
+    A_UINT32 per_ant_snr; /* units = dB */
+    A_UINT32 nf; /* units = dBm */
+} wmi_peer_signal_stats_thresh;
+
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tx_stats */
+    /** Number of total TX packets on MAC layer in the period */
+    A_UINT32 tx_msdus;
+    /** Bytes of tx data on MAC layer in the period */
+    A_UINT32 tx_bytes;
+    /** Number of TX packets cancelled due to any reason in the period,
+     * such as WMM limitation/bandwidth limitation/radio congestion */
+    A_UINT32 tx_msdu_drops;
+    /** Bytes of dropped TX packets in the period */
+    A_UINT32 tx_drop_bytes;
+    /** Number of unacked transmissions of MPDUs */
+    A_UINT32 tx_mpdu_retries;
+    /** Number of packets have not been ACKed despite retried */
+    A_UINT32 tx_msdu_failed;        
+    /* This TLV is followed by TLVs below: :
+     *     A_UINT32 tx_mpdu_aggr[tx_mpdu_aggr_array_size];
+     *     A_UINT32 tx_msdu_acked_mcs[tx_msdu_acked_mcs_array_size];
+     *     A_UINT32 tx_msdu_failed_mcs[tx_msdu_failed_mcs_array_size];
+     *     A_UINT32 tx_msdu_delay[tx_msdu_delay_array_size];
+     */
+} wmi_tx_stats;
+
+/** Thresholds of tx stats, stand for percentage of stats variation.
+ *  Check wmi_tx_stats for each stats's meaning.
+ */
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tx_stats_thresh */
+    A_UINT32 tx_msdus;
+    A_UINT32 tx_bytes;
+    A_UINT32 tx_msdu_drops;
+    A_UINT32 tx_drop_bytes;
+    A_UINT32 tx_mpdu_retries;
+    A_UINT32 tx_msdu_failed;
+    A_UINT32 tx_mpdu_aggr;
+    A_UINT32 tx_msdu_acked_mcs;
+    A_UINT32 tx_msdu_failed_mcs;
+    A_UINT32 tx_msdu_delay;
+} wmi_tx_stats_thresh;
+
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_ac_tx_stats */
+    A_UINT32 vdev_id;
+    A_UINT32 peer_id;
+    /* The TLVs for the 4 AC follows:
+     *     wmi_tx_stats tx_stats[];   wmi_tx_stats for BE/BK/VI/VO
+     */
+} wmi_peer_ac_tx_stats;
+
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rx_stats */
+    /** Number of RX packets on MAC layer */
+    A_UINT32 mac_rx_msdus;
+    /** Bytes of RX packets on MAC layer */
+    A_UINT32 mac_rx_bytes;
+    /** Number of RX packets on PHY layer */
+    A_UINT32 phy_rx_msdus;
+    /** Bytes of RX packets on PHY layer */
+    A_UINT32 phy_rx_bytes;
+    /** Number of discontinuity in seqnum */
+    A_UINT32 seq_dcont_num;
+    /** Number of RX packets flagged as retransmissions */
+    A_UINT32 rx_msdu_retry;
+    /** Number of RX packets identified as duplicates */
+    A_UINT32 rx_msdu_dup;
+    /** Number of RX packets discarded */
+    A_UINT32 rx_msdu_discard;
+    /** How many times STAs go to sleep */
+    A_UINT32 sta_ps_inds;
+    /** Total sleep time of STAs, milliseconds units */
+    A_UINT32 sta_ps_durs;
+    /** Number of probe requests received */
+    A_UINT32 rx_probe_reqs;
+    /** Number of other management frames received, not including probe requests */
+    A_UINT32 rx_oth_mgmts;    
+    /* This TLV is followed by TLVs below:
+     *     A_UINT32 rx_mpdu_aggr[rx_mpdu_aggr_array_size];
+     *     A_UINT32 rx_msdu_mcs[rx_msdu_mcs_array_size];
+     */
+} wmi_rx_stats;
+
+/** Thresholds of rx stats, stands for percentage of stats variation.
+ *  Check wmi_rx_stats for each stats's meaning.
+ */
+typedef struct
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rx_stats_thresh */
+    A_UINT32 mac_rx_msdus;
+    A_UINT32 mac_rx_bytes;
+    A_UINT32 phy_rx_msdus;
+    A_UINT32 phy_rx_bytes;
+    A_UINT32 seq_dcont_num;
+    A_UINT32 rx_msdu_retry;
+    A_UINT32 rx_msdu_dup;
+    A_UINT32 rx_msdu_discard;
+    A_UINT32 sta_ps_inds;
+    A_UINT32 sta_ps_durs;
+    A_UINT32 rx_probe_reqs;
+    A_UINT32 rx_oth_mgmts;
+    A_UINT32 rx_mpdu_aggr;
+    A_UINT32 rx_msdu_mcs;
+} wmi_rx_stats_thresh;
+
+typedef struct
+{    
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_ac_rx_stats */
+    A_UINT32 vdev_id;
+    A_UINT32 peer_id;
+    /* The TLVs for the 4 AC follows:
+     *     wmi_rx_stats rx_stats[];  wmi_rx_stats for BE/BK/VI/VO
+     */
+} wmi_peer_ac_rx_stats;
+
+typedef enum {
+    /** Periodic timer timed out, based on the period specified
+     *  by WMI_PDEV_PARAM_STATS_OBSERVATION_PERIOD
+     */
+    TRIGGER_COND_ID_TIMER_TIMED_OUT  =  0x1,
+    /** Any of the (enabled) stats thresholds specified
+     *  in the WMI_PDEV_SET_STATS_THRESHOLD_CMD message is exceeded
+     *  within the current stats period.
+     */
+    TRIGGER_COND_ID_THRESH_EXCEEDED  =  0x2,
+    /** In Response to the one-time wlan stats request of
+     *  WMI_REQUEST_WLAN_STATS_CMDID from host.
+     */
+    TRIGGER_COND_ID_ONE_TIME_REQUEST =  0x3,
+} wmi_report_stats_event_trigger_cond_id;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_report_stats_event_fixed_param */
+    /** Indicate what triggered this event, check wmi_report_stats_event_trigger_cond_id for details */
+    A_UINT32 trigger_cond_id;
+    /** Bitmap to indicate changed channel CCA stats which exceeded the thresholds */
+    A_UINT32 cca_chgd_bitmap;
+    /** Bitmap to indicate changed peer signal stats which exceeded the thresholds */
+    A_UINT32 sig_chgd_bitmap;
+    /** Bitmap to indicate changed TX counters which exceeded the thresholds */
+    A_UINT32 tx_chgd_bitmap;
+    /** Bitmap to indicate changed RX counters which exceeded the thresholds */
+    A_UINT32 rx_chgd_bitmap;
+    /** number of per channel CCA stats structures (wmi_chan_cca_stats), 0 to max vdevs*/
+    A_UINT32 num_chan_cca_stats;
+    /** number of per peer signal stats structures (wmi_peer_signal_stats), 0 to max peers*/
+    A_UINT32 num_peer_signal_stats;
+    /** number of per peer ac TX stats structures (wmi_peer_ac_tx_stats), 0 to max peers*/
+    A_UINT32 num_peer_ac_tx_stats;
+    /** Array size of tx_mpdu_aggr[] which is histogram of MPDU aggregation size(1 to 7 and 8+).
+     *  The array indicates number of MPDUs sent on specified aggregation size
+     *  (per number of MPDUs per AMPDUs / 1 to 7 and 8+).
+     *  Array size can be set per WMI_PDEV_PARAM_TX_MPDU_AGGR_ARRAY_SIZE */
+    A_UINT32 tx_mpdu_aggr_array_size;
+    /** Array size of tx_msdu_acked_mcs[] which is histogram of encoding rate.
+     *  The array indicates number of acked packets sent at a specific rate */
+    A_UINT32 tx_msdu_acked_mcs_array_size;
+    /** Array size of tx_msdu_failed_mcs[] which is histogram of encoding rate.
+     *  The array indicates number of failed packets sent at a specific rate */
+    A_UINT32 tx_msdu_failed_mcs_array_size;
+    /** tx_msdu_delay[]is a histogram of delays on MAC layer.
+    * The array stands for numbers of packets on different TX time delays.
+    * TX delay here means time interval between the time the packet has been received
+    * at the MAC layer and the time lower layers returns a tx status (<10ms to >100ms)
+    *
+    * The bin size tx_delay_bin_size_ms specifies how many milliseconds
+    * each bin of the tx_delay histogram represents.
+    * By default the bin size is 10ms.
+    * tx_msdu_delay[0] -> delays between 0-9 ms
+    * tx_msdu_delay[1] -> delays between 10-19 ms
+    * ...
+    * tx_msdu_delay[9] -> delays between 90-99 ms
+    * tx_msdu_delay[10] -> delays >= 100 ms
+    * Bin size can be set per WMI_PDEV_PARAM_TX_DELAY_BIN_SIZE_MS.
+    */
+    A_UINT32 tx_msdu_delay_bin_size_ms;
+    /** Array size of tx_msdu_delay[]. It can be set per WMI_PDEV_PARAM_TX_DELAY_ARRAY_SIZE */
+    A_UINT32 tx_msdu_delay_array_size;
+    /** number of per peer ac RX stats structures (wmi_peer_ac_rx_stats), 0 to max peers*/
+    A_UINT32 num_peer_ac_rx_stats;
+    /** Array size of rx_mpdu_aggr[] which is histogram of MPDU aggregation size(1 to 7 and 8+).
+     *  It can be set per WMI_PDEV_PARAM_RX_MPDU_AGGR_ARRAY_SIZE */
+    A_UINT32 rx_mpdu_aggr_array_size;
+    /** Array size of rx_msdu_mcs[] which is histogram of encoding rate.
+     *  The array indicates number of packets received at a specific rate */    
+    A_UINT32 rx_msdu_mcs_array_size;
+   
+    /**
+     * This TLV is followed by TLVs below:
+     *    wmi_chan_cca_stats       chan_cca_stats[];         Array size is specified by num_chan_cca_stats
+     *    wmi_peer_signal_stats    peer_signal_stats[];      Array size is specified by num_peer_signal_stats
+     *    wmi_peer_ac_tx_stats     peer_ac_tx_stats[];       Array size is specified by num_peer_ac_tx_stats
+     *    wmi_tx_stats             tx_stats[][];             Array size is num_peer_ac_tx_stats * WLAN_MAX_AC, array index is (peer_index * WLAN_MAX_AC + ac_index)
+     *    A_UINT32                 tx_mpdu_aggr[][][];       Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_mpdu_aggr_array_size,
+     *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_mpdu_aggr_array_size + A-MPDU aggregation index
+     *    A_UINT32                 tx_msdu_acked_mcs[][][];  Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_msdu_acked_mcs_array_size,
+     *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_msdu_acked_mcs_array_size + MCS index
+     *    A_UINT32                 tx_msdu_failed_mcs[][][]; Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_msdu_failed_mcs_array_size,
+     *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_msdu_failed_mcs_array_size + MCS index
+     *    A_UINT32                 tx_msdu_delay[][][];      Array size is num_peer_ac_tx_stats * WLAN_MAX_AC * tx_msdu_delay_array_size,
+     *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * tx_msdu_delay_array_size + tx delay index
+     *    wmi_peer_ac_rx_stats     peer_ac_rx_stats[];       Array size is specified by num_peer_ac_rx_stats
+     *    wmi_rx_stats             rx_stats[][];             Array size is num_peer_ac_rx_stats * WLAN_MAX_AC, array index is (peer_index * WLAN_MAX_AC + ac_index)
+     *    A_UINT32                 rx_mpdu_aggr[][][];       Array size is num_peer_ac_rx_stats * WLAN_MAX_AC * rx_mpdu_aggr_array_size,
+     *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * rx_mpdu_aggr_array_size + A-MPDU aggregation index
+     *    A_UINT32                 rx_msdu_mcs[][][];        Array size is (num_peer_ac_rx_stats * WLAN_MAX_AC) * rx_msdu_mcs_array_size,
+     *                                                       array index is (peer_index * WLAN_MAX_AC + ac_index) * rx_msdu_mcs_array_size + MCS index
+     **/
+} wmi_report_stats_event_fixed_param;  
+
+/**
+ *  PDEV statistics
+ *  @todo
+ *  add all PDEV stats here
+ */
+typedef struct {
+    /** Channel noise floor */
+    A_INT32 chan_nf;
+    /** TX frame count */
+    A_UINT32 tx_frame_count;
+    /** RX frame count */
+    A_UINT32 rx_frame_count;
+    /** rx clear count */
+    A_UINT32 rx_clear_count;
+    /** cycle count */
+    A_UINT32 cycle_count;
+    /** Phy error count */
+    A_UINT32 phy_err_count;
+    /** Channel Tx Power */
+    A_UINT32 chan_tx_pwr;
+    /** WAL dbg stats */
+    struct wlan_dbg_stats pdev_stats;
+
+} wmi_pdev_stats;
+
+/**
+ *  VDEV statistics
+ *  @todo
+ *  add all VDEV stats here
+ */
+
+typedef struct {
+    A_INT32 bcn_snr;
+    A_INT32 dat_snr;
+} wmi_snr_info;
+
+typedef struct {
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    wmi_snr_info vdev_snr;
+    A_UINT32 tx_frm_cnt[WLAN_MAX_AC];/* Total number of packets(per AC) that were successfully transmitted(with and without retries, including multi-cast, broadcast) */
+    A_UINT32 rx_frm_cnt;/* Total number of packets that were successfully received (after appropriate filter rules including multi-cast, broadcast)*/
+    A_UINT32 multiple_retry_cnt[WLAN_MAX_AC];/*The number of MSDU packets and MMPDU frames per AC
+     that the 802.11 station successfully transmitted after more than one retransmission attempt*/
+    A_UINT32 fail_cnt[WLAN_MAX_AC]; /*Total number packets(per AC) failed to transmit */
+    A_UINT32 rts_fail_cnt;/*Total number of RTS/CTS sequence failures for transmission of a packet*/
+    A_UINT32 rts_succ_cnt;/*Total number of RTS/CTS sequence success for transmission of a packet*/
+    A_UINT32 rx_err_cnt;/*The receive error count. HAL will provide the RxP FCS error global */
+    A_UINT32 rx_discard_cnt;/* The sum of the receive error count and dropped-receive-buffer error count. (FCS error)*/
+    A_UINT32 ack_fail_cnt;/*Total number packets failed transmit because of no ACK from the remote entity*/
+    A_UINT32 tx_rate_history[MAX_TX_RATE_VALUES];/*History of last ten transmit rate, in units of 500 kbit/sec*/
+    A_UINT32 bcn_rssi_history[MAX_RSSI_VALUES];/*History of last ten Beacon rssi of the connected Bss*/
+} wmi_vdev_stats;
+
+/**
+ *  peer statistics.
+ *
+ * @todo
+ * add more stats
+ *
+ */
+typedef struct {
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** rssi */
+    A_UINT32 peer_rssi;
+    /** last tx data rate used for peer */
+    A_UINT32 peer_tx_rate;
+    /** last rx data rate used for peer */
+    A_UINT32 peer_rx_rate;
+} wmi_peer_stats;
+
+typedef struct {
+    /** Primary channel freq of the channel for which stats are sent */
+    A_UINT32 chan_mhz;
+    /** Time spent on the channel */
+    A_UINT32 sampling_period_us;
+    /** Aggregate duration over a sampling period for which channel activity was observed */
+    A_UINT32 rx_clear_count;
+    /** Accumalation of the TX PPDU duration over a sampling period */
+    A_UINT32 tx_duration_us;
+    /** Accumalation of the RX PPDU duration over a sampling period */
+    A_UINT32 rx_duration_us;
+} wmi_chan_stats;
+
+typedef struct {
+    A_UINT32 tx_mpdu_grp_frag_cnt;       /*dot11TransmittedFragmentCount */
+    A_UINT32 tx_msdu_grp_frm_cnt;        /*dot11GroupTransmittedFrameCount */
+    A_UINT32 tx_msdu_fail_cnt;           /*dot11FailedCount*/
+    A_UINT32 rx_mpdu_frag_cnt;           /*dot11ReceivedFragmentCount*/
+    A_UINT32 rx_msdu_grp_frm_cnt;        /*dot11GroupReceivedFrameCount*/
+    A_UINT32 rx_mpdu_fcs_err;            /*dot11FCSErrorCount*/
+    A_UINT32 tx_msdu_frm_cnt;            /*dot11TransmittedFrameCount*/
+    A_UINT32 tx_msdu_retry_cnt;          /*dot11RetryCount*/
+    A_UINT32 rx_frm_dup_cnt;             /*dot11FrameDuplicateCount */
+    A_UINT32 tx_rts_success_cnt;         /*dot11RTSSuccessCount*/
+    A_UINT32 tx_rts_fail_cnt;            /*dot11RTSFailureCount*/
+    A_UINT32 tx_Qos_mpdu_grp_frag_cnt;   /*dot11QosTransmittedFragmentCount */
+    A_UINT32 tx_Qos_msdu_fail_UP;        /*dot11QosFailedCount */
+    A_UINT32 tx_Qos_msdu_retry_UP;       /*dot11QosRetryCount */
+    A_UINT32 rx_Qos_frm_dup_cnt_UP;      /*dot11QosFrameDuplicateCount*/
+    A_UINT32 tx_Qos_rts_success_cnt_UP;  /*dot11QosRTSSuccessCount*/
+    A_UINT32 tx_Qos_rts_fail_cnt_UP;     /*dot11QosRTSFailureCount*/
+    A_UINT32 rx_Qos_mpdu_frag_cnt_UP;    /*dot11QosReceivedFragmentCount*/
+    A_UINT32 tx_Qos_msdu_frm_cnt_UP;     /*dot11QosTransmittedFrameCount*/
+    A_UINT32 rx_Qos_msdu_discard_cnt_UP; /*dot11QosDiscardedFrameCount*/
+    A_UINT32 rx_Qos_mpdu_cnt;            /*dot11QosMPDUsReceivedCount*/
+    A_UINT32 rx_Qos_mpdu_retryBit_cnt;   /*dot11QosRetriesReceivedCount*/
+    A_UINT32 rsna_Mgmt_discard_CCMP_replay_err_cnt; /*dot11RSNAStatsRobustMgmtCCMPReplays*/
+    A_UINT32 rsna_TKIP_icv_err_cnt;      /*dot11RSNAStatsTKIPICVErrors*/
+    A_UINT32 rsna_TKIP_replay_err_cnt;   /*dot11RSNAStatsTKIPReplays*/
+    A_UINT32 rsna_CCMP_decrypt_err_cnt;  /*dot11RSNAStatsCCMPDecryptErrors*/
+    A_UINT32 rsna_CCMP_replay_err_cnt;   /*dot11RSNAStatsCCMPReplays*/
+    A_UINT32 tx_ampdu_cnt;               /*dot11TransmittedAMPDUCount*/
+    A_UINT32 tx_mpdu_cnt_in_ampdu;       /*dot11TransmittedMPDUsInAMPDUCount*/
+    union {
+        A_UINT64 counter; /* for use by target only */
+        struct {
+            A_UINT32 low;
+            A_UINT32 high;
+        } upload; /* for use by host */
+    } tx_octets_in_ampdu;                /*dot11TransmittedOctetsInAMPDUCount*/
+    A_UINT32 rx_ampdu_cnt;               /*dot11AMPDUReceivedCount*/
+    A_UINT32 rx_mpdu_cnt_in_ampdu;       /*dot11MPDUInReceivedAMPDUCount*/
+    union {
+        A_UINT64 counter; /* for use by target only */
+        struct {
+            A_UINT32 rx_octets_in_ampdu_low;
+            A_UINT32 rx_octets_in_ampdu_high;
+        } upload; /* for use by host */
+    } rx_octets_in_ampdu;                /*dot11ReceivedOctetsInAMPDUCount*/
+    A_UINT32 reserved_1;
+    A_UINT32 reserved_2;
+    A_UINT32 reserved_3;
+    A_UINT32 reserved_4;
+} wmi_mib_stats;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rssi_stats */
+    A_UINT32 vdev_id;
+    A_INT32  rssi_avg_beacon[WMI_MAX_CHAINS];
+    A_INT32  rssi_avg_data[WMI_MAX_CHAINS];
+    wmi_mac_addr peer_macaddr;
+} wmi_rssi_stats;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_per_chain_rssi_stats */
+    A_UINT32 num_per_chain_rssi_stats;
+/* This TLV is followed by another TLV of array of structs:
+ *     wmi_rssi_stats rssi_stats[num_per_chain_rssi_stats];
+ */
+} wmi_per_chain_rssi_stats;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_create_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** VDEV type (AP,STA,IBSS,MONITOR) */
+    A_UINT32 vdev_type;
+    /** VDEV subtype (P2PDEV, P2PCLI, P2PGO, BT3.0)*/
+    A_UINT32 vdev_subtype;
+    /** VDEV MAC address */
+    wmi_mac_addr vdev_macaddr;
+    /** Number of configured txrx streams */
+    A_UINT32 num_cfg_txrx_streams;
+    /**
+     * pdev_id for identifying the MAC,
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+/* This TLV is followed by another TLV of array of structures
+ *   wmi_vdev_txrx_streams cfg_txrx_streams[];
+ */
+} wmi_vdev_create_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_txrx_streams */
+    /* band - Should take values from wmi_channel_band_mask */
+    A_UINT32 band;
+    /* max supported tx streams per given band for this vdev */
+    A_UINT32 supported_tx_streams;
+    /* max supported rx streams per given band for this vdev */
+    A_UINT32 supported_rx_streams;
+} wmi_vdev_txrx_streams;
+
+/* wmi_p2p_noa_descriptor structure can't be modified without breaking the compatibility for WMI_HOST_SWBA_EVENTID */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_noa_descriptor */
+    A_UINT32 type_count; /** 255: continuous schedule, 0: reserved */
+    A_UINT32 duration; /** Absent period duration in micro seconds */
+    A_UINT32 interval; /** Absent period interval in micro seconds */
+    A_UINT32 start_time; /** 32 bit tsf time when in starts */
+} wmi_p2p_noa_descriptor;
+
+/** values for vdev_type */
+#define WMI_VDEV_TYPE_AP         0x1
+#define WMI_VDEV_TYPE_STA        0x2
+#define WMI_VDEV_TYPE_IBSS       0x3
+#define WMI_VDEV_TYPE_MONITOR    0x4
+
+/** VDEV type is for social wifi interface.This VDEV is Currently mainly needed
+* by FW to execute the NAN specific WMI commands and also implement NAN specific
+* operations like Network discovery, service provisioning and service
+* subscription  ..etc. If FW needs NAN VDEV then Host should issue VDEV create
+* WMI command to create this VDEV once during initialization and host is not
+* expected to use any VDEV specific WMI commands on this VDEV.
+**/
+#define WMI_VDEV_TYPE_NAN        0x5
+
+#define WMI_VDEV_TYPE_OCB        0x6
+
+/* NAN Data Interface */
+#define WMI_VDEV_TYPE_NDI        0x7
+
+/** values for vdev_subtype */
+#define WMI_UNIFIED_VDEV_SUBTYPE_P2P_DEVICE 0x1
+#define WMI_UNIFIED_VDEV_SUBTYPE_P2P_CLIENT 0x2
+#define WMI_UNIFIED_VDEV_SUBTYPE_P2P_GO     0x3
+#define WMI_UNIFIED_VDEV_SUBTYPE_PROXY_STA  0x4
+#define WMI_UNIFIED_VDEV_SUBTYPE_MESH       0x5
+/* new subtype for 11S mesh is required as 11S functionality differs
+ * in many ways from proprietary mesh
+ * 11S uses 6-addr frame format and supports peering between mesh
+ * stations and dynamic best path selection between mesh stations.
+ * While in proprietary mesh, neighboring mesh station MAC is manually
+ * added to AST table for traffic flow between mesh stations
+ */
+#define WMI_UNIFIED_VDEV_SUBTYPE_MESH_11S   0x6
+
+/** values for vdev_start_request flags */
+/** Indicates that AP VDEV uses hidden ssid. only valid for
+ *  AP/GO */
+#define WMI_UNIFIED_VDEV_START_HIDDEN_SSID  (1<<0)
+/** Indicates if robust management frame/management frame
+ *  protection is enabled. For GO/AP vdevs, it indicates that
+ *  it may support station/client associations with RMF enabled.
+ *  For STA/client vdevs, it indicates that sta will
+ *  associate with AP with RMF enabled. */
+#define WMI_UNIFIED_VDEV_START_PMF_ENABLED  (1<<1)
+
+/*
+ * Host is sending bcn_tx_rate to override the beacon tx rates.
+ */
+#define WMI_UNIFIED_VDEV_START_BCN_TX_RATE_PRESENT (1<<2)
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** requestor id identifying the caller module */
+    A_UINT32 requestor_id;
+    /** beacon interval from received beacon */
+    A_UINT32 beacon_interval;
+    /** DTIM Period from the received beacon */
+    A_UINT32 dtim_period;
+    /** Flags */
+    A_UINT32 flags;
+    /** ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
+    wmi_ssid ssid;
+    /** beacon/probe reponse xmit rate. Applicable for SoftAP. */
+    /** This field will be invalid and ignored unless the */
+    /** flags field has the WMI_UNIFIED_VDEV_START_BCN_TX_RATE_PRESENT bit. */
+    /** When valid, this field contains the fixed tx rate for the beacon */
+    /** and probe response frames send by the GO or SoftAP */
+    A_UINT32 bcn_tx_rate;
+    /** beacon/probe reponse xmit power. Applicable for SoftAP. */
+    A_UINT32 bcn_txPower;
+    /** number of p2p NOA descriptor(s) from scan entry */
+    A_UINT32 num_noa_descriptors;
+    /** Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
+     During CAC, Our HW shouldn't ack ditected frames */
+    A_UINT32 disable_hw_ack;
+    /** This field will be invalid unless the Dual Band Simultaneous (DBS) feature is enabled. */
+    /** The DBS policy manager indicates the preferred number of transmit streams. */
+    A_UINT32 preferred_tx_streams;
+    /** This field will be invalid unless the Dual Band Simultaneous (DBS) feature is enabled. */
+    /** the DBS policy manager indicates the preferred number of receive streams. */
+    A_UINT32 preferred_rx_streams;
+/* The TLVs follows this structure:
+ *     wmi_channel chan; <-- WMI channel
+ *     wmi_p2p_noa_descriptor  noa_descriptors[]; <-- actual p2p NOA descriptor from scan entry
+ */
+} wmi_vdev_start_request_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_delete_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_delete_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_up_cmdid_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** aid (assoc id) received in association response for STA VDEV  */
+    A_UINT32 vdev_assoc_id;
+    /** bssid of the BSS the VDEV is joining  */
+    wmi_mac_addr vdev_bssid;
+} wmi_vdev_up_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_stop_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_stop_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_down_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_down_cmd_fixed_param;
+
+typedef struct {
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_standby_response_cmd;
+
+typedef struct {
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_resume_response_cmd;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_param_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** parameter id   */
+    A_UINT32 param_id;
+    /** parameter value */
+    A_UINT32 param_value;
+} wmi_vdev_set_param_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 key_seq_counter_l;
+    A_UINT32 key_seq_counter_h;
+} wmi_key_seq_counter;
+
+#define  WMI_CIPHER_NONE     0x0  /* clear key */
+#define  WMI_CIPHER_WEP      0x1
+#define  WMI_CIPHER_TKIP     0x2
+#define  WMI_CIPHER_AES_OCB  0x3
+#define  WMI_CIPHER_AES_CCM  0x4
+#define  WMI_CIPHER_WAPI     0x5
+#define  WMI_CIPHER_CKIP     0x6
+#define  WMI_CIPHER_AES_CMAC 0x7
+#define  WMI_CIPHER_ANY      0x8
+#define  WMI_CIPHER_AES_GCM  0x9
+#define  WMI_CIPHER_AES_GMAC 0xa
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_install_key_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** MAC address used for installing   */
+    wmi_mac_addr peer_macaddr;
+    /** key index */
+    A_UINT32 key_ix;
+    /** key flags */
+    A_UINT32 key_flags;
+    /** key cipher, defined above */
+    A_UINT32 key_cipher;
+    /** key rsc counter */
+    wmi_key_seq_counter key_rsc_counter;
+    /** global key rsc counter */
+    wmi_key_seq_counter key_global_rsc_counter;
+    /** global key tsc counter */
+    wmi_key_seq_counter key_tsc_counter;
+    /** WAPI key rsc counter */
+    A_UINT8 wpi_key_rsc_counter[16];
+    /** WAPI key tsc counter */
+    A_UINT8 wpi_key_tsc_counter[16];
+    /** key length */
+    A_UINT32 key_len;
+    /** key tx mic length */
+    A_UINT32 key_txmic_len;
+    /** key rx mic length */
+    A_UINT32 key_rxmic_len;
+/*
+ * Following this struct are this TLV.
+ *     A_UINT8  key_data[]; <-- actual key data; contains key followed by tx mic followed by rx mic
+ */
+} wmi_vdev_install_key_cmd_fixed_param;
+
+/** Preamble types to be used with VDEV fixed rate configuration */
+typedef enum {
+    WMI_RATE_PREAMBLE_OFDM,
+    WMI_RATE_PREAMBLE_CCK,
+    WMI_RATE_PREAMBLE_HT,
+    WMI_RATE_PREAMBLE_VHT,
+} WMI_RATE_PREAMBLE;
+
+/** Value to disable fixed rate setting */
+#define WMI_FIXED_RATE_NONE    (0xff)
+
+/** the definition of different VDEV parameters */
+typedef enum {
+    /** RTS Threshold */
+    WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+    /** Fragmentation threshold */
+    WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+    /** beacon interval in TUs */
+    WMI_VDEV_PARAM_BEACON_INTERVAL,
+    /** Listen interval in TUs */
+    WMI_VDEV_PARAM_LISTEN_INTERVAL,
+    /** muticast rate in Mbps */
+    WMI_VDEV_PARAM_MULTICAST_RATE,
+    /** management frame rate in Mbps */
+    WMI_VDEV_PARAM_MGMT_TX_RATE,
+    /** slot time (long vs short) */
+    WMI_VDEV_PARAM_SLOT_TIME,
+    /** preamble (long vs short) */
+    WMI_VDEV_PARAM_PREAMBLE,
+    /** SWBA time (time before tbtt in msec) */
+    WMI_VDEV_PARAM_SWBA_TIME,
+    /** time period for updating VDEV stats */
+    WMI_VDEV_STATS_UPDATE_PERIOD,
+    /** age out time in msec for frames queued for station in power save*/
+    WMI_VDEV_PWRSAVE_AGEOUT_TIME,
+    /** Host SWBA interval (time in msec before tbtt for SWBA event generation) */
+    WMI_VDEV_HOST_SWBA_INTERVAL,
+    /** DTIM period (specified in units of num beacon intervals) */
+    WMI_VDEV_PARAM_DTIM_PERIOD,
+    /** scheduler air time limit for this VDEV. used by off chan scheduler  */
+    WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+    /** enable/dsiable WDS for this VDEV  */
+    WMI_VDEV_PARAM_WDS,
+    /** ATIM Window */
+    WMI_VDEV_PARAM_ATIM_WINDOW,
+    /** BMISS max */
+    WMI_VDEV_PARAM_BMISS_COUNT_MAX,
+    /** BMISS first time */
+    WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
+    /** BMISS final time */
+    WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
+    /** WMM enables/disabled */
+    WMI_VDEV_PARAM_FEATURE_WMM,
+    /** Channel width */
+    WMI_VDEV_PARAM_CHWIDTH,
+    /** Channel Offset */
+    WMI_VDEV_PARAM_CHEXTOFFSET,
+    /** Disable HT Protection */
+    WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
+    /** Quick STA Kickout */
+    WMI_VDEV_PARAM_STA_QUICKKICKOUT,
+    /** Rate to be used with Management frames */
+    WMI_VDEV_PARAM_MGMT_RATE,
+    /** Protection Mode */
+    WMI_VDEV_PARAM_PROTECTION_MODE,
+    /** Fixed rate setting */
+    WMI_VDEV_PARAM_FIXED_RATE,
+    /** Short GI Enable/Disable */
+    WMI_VDEV_PARAM_SGI,
+    /** Enable LDPC */
+    WMI_VDEV_PARAM_LDPC,
+    /** Enable Tx STBC */
+    WMI_VDEV_PARAM_TX_STBC,
+    /** Enable Rx STBC */
+    WMI_VDEV_PARAM_RX_STBC,
+    /** Intra BSS forwarding  */
+    WMI_VDEV_PARAM_INTRA_BSS_FWD,
+    /** Setting Default xmit key for Vdev */
+    WMI_VDEV_PARAM_DEF_KEYID,
+    /** NSS width */
+    WMI_VDEV_PARAM_NSS,
+    /** Set the custom rate for the broadcast data frames */
+    WMI_VDEV_PARAM_BCAST_DATA_RATE,
+    /** Set the custom rate (rate-code) for multicast data frames */
+    WMI_VDEV_PARAM_MCAST_DATA_RATE,
+    /** Tx multicast packet indicate Enable/Disable */
+    WMI_VDEV_PARAM_MCAST_INDICATE,
+    /** Tx DHCP packet indicate Enable/Disable */
+    WMI_VDEV_PARAM_DHCP_INDICATE,
+    /** Enable host inspection of Tx unicast packet to unknown destination */
+    WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+
+    /* The minimum amount of time AP begins to consider STA inactive */
+    WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+
+    /* An associated STA is considered inactive when there is no recent TX/RX
+     * activity and no downlink frames are buffered for it. Once a STA exceeds
+     * the maximum idle inactive time, the AP will send an 802.11 data-null as
+     * a keep alive to verify the STA is still associated. If the STA does ACK
+     * the data-null, or if the data-null is buffered and the STA does not
+     * retrieve it, the STA will be considered unresponsive (see
+     * WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). */
+    WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+
+    /* An associated STA is considered unresponsive if there is no recent
+     * TX/RX activity and downlink frames are buffered for it. Once a STA
+     * exceeds the maximum unresponsive time, the AP will send a
+     * WMI_STA_KICKOUT event to the host so the STA can be deleted. */
+    WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+
+    /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
+    WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
+    /** Enable/Disable RTS-CTS */
+    WMI_VDEV_PARAM_ENABLE_RTSCTS,
+    /* Enable TXBFee/er */
+    WMI_VDEV_PARAM_TXBF,
+
+    /**Set packet power save */
+    WMI_VDEV_PARAM_PACKET_POWERSAVE,
+
+    /**Drops un-encrypted packets if any received in an encryted connection
+     * otherwise forwards to host
+     */
+    WMI_VDEV_PARAM_DROP_UNENCRY,
+
+    /*
+     * Set TX encap type.
+     *
+     * enum wmi_pkt_type is to be used as the parameter
+     * specifying the encap type.
+     */
+    WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+
+    /*
+     * Try to detect stations that woke-up and exited power save but did not
+     * successfully transmit data-null with PM=0 to AP. When this happens,
+     * STA and AP power save state are out-of-sync. Use buffered but
+     * undelivered MSDU to the STA as a hint that the STA is really awake
+     * and expecting normal ASAP delivery, rather than retrieving BU with
+     * PS-Poll, U-APSD trigger, etc.
+     *
+     * 0 disables out-of-sync detection. Maximum time is 255 seconds.
+     */
+    WMI_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+
+    /* Enable/Disable early rx dynamic adjust feature.
+     * Early-rx dynamic adjust is a advance power save feature.
+     * Early-rx is a wakeup duration before exact TBTT,which is deemed necessary to provide a cushion for various
+     * timing discrepancies in the system.
+     * In current code branch, the duration is set to a very conservative fix value to make sure the drift impact is minimum.
+     * The fix early-tx will result in the unnessary power consume, so a dynamic early-rx adjust algorithm can be designed
+     * properly to minimum the power consume.*/
+    WMI_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
+
+    /* set target bmiss number per sample cycle if bmiss adjust was chosen.
+     * In this adjust policy,early-rx is adjusted by comparing the current bmiss rate to target bmiss rate
+     * which can be set by user through WMI command.
+     */
+    WMI_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
+
+    /* set sample cycle(in the unit of beacon interval) if bmiss adjust was chosen */
+    WMI_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
+
+    /* set slop_step */
+    WMI_VDEV_PARAM_EARLY_RX_SLOP_STEP,
+
+    /* set init slop */
+    WMI_VDEV_PARAM_EARLY_RX_INIT_SLOP,
+
+    /* pause adjust enable/disable */
+    WMI_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
+
+
+    /* Set channel pwr limit value of the vdev the minimal value of all
+     * vdevs operating on this channel will be set as channel tx power
+     * limit, which is used to configure ratearray
+     */
+    WMI_VDEV_PARAM_TX_PWRLIMIT,
+
+    /* set the count of snr value for calculation in snr monitor */
+    WMI_VDEV_PARAM_SNR_NUM_FOR_CAL,
+
+    /** Roaming offload */
+    WMI_VDEV_PARAM_ROAM_FW_OFFLOAD,
+
+    /** Enable Leader request RX functionality for RMC */
+    WMI_VDEV_PARAM_ENABLE_RMC,
+
+   /* IBSS does not have deauth/disassoc, vdev has to detect peer gone event
+     * by himself. If the beacon lost time exceed this threshold, the peer is
+     * thought to be gone. */
+    WMI_VDEV_PARAM_IBSS_MAX_BCN_LOST_MS,
+
+    /** max rate in kpbs, transmit rate can't go beyond it */
+    WMI_VDEV_PARAM_MAX_RATE,
+
+    /* enable/disable drift sample. 0: disable; 1: clk_drift; 2: ap_drift; 3 both clk and ap drift*/
+    WMI_VDEV_PARAM_EARLY_RX_DRIFT_SAMPLE,
+
+    /* set Tx failure count threshold for the vdev */
+    WMI_VDEV_PARAM_SET_IBSS_TX_FAIL_CNT_THR,
+
+    /* set ebt resync timeout value, in the unit of TU */
+    WMI_VDEV_PARAM_EBT_RESYNC_TIMEOUT,
+
+    /* Enable Aggregation State Trigger Event */
+    WMI_VDEV_PARAM_AGGR_TRIG_EVENT_ENABLE,
+
+    /* This parameter indicates whether IBSS station can enter into power save
+    * mode by sending Null frame (with PM=1). When not allowed, IBSS station has to stay
+    * awake all the time and should never set PM=1 in its transmitted frames.
+    * This parameter is meaningful/valid only when WMI_VDEV_PARAM_ATIM_WINDOW_LENGTH
+    * is non-zero. */
+    WMI_VDEV_PARAM_IS_IBSS_POWER_SAVE_ALLOWED,
+
+    /* This parameter indicates if this station can enter into power collapse
+    * for the remaining beacon interval after the ATIM window.
+    * This parameter is meaningful/valid only when WMI_VDEV_PARAM_IS_IBSS_POWER_SAVE_ALLOWED
+    * is set to TRUE. */
+    WMI_VDEV_PARAM_IS_POWER_COLLAPSE_ALLOWED,
+
+    /* This parameter indicates whether IBSS station exit power save mode and
+    * enter power active state (by sending Null frame with PM=0 in the immediate ATIM Window)
+    * whenever there is a TX/RX activity. */
+    WMI_VDEV_PARAM_IS_AWAKE_ON_TXRX_ENABLED,
+
+    /* If Awake on TX/RX activity is enabled, this parameter indicates
+    * the data inactivity time in number of beacon intervals after which
+    * IBSS station reenters power save by sending Null frame with PM=1. */
+    WMI_VDEV_PARAM_INACTIVITY_CNT,
+
+    /* Inactivity time in msec after which TX Service Period (SP) is
+    * terminated by sending a Qos Null frame with EOSP.
+    * If value is 0, TX SP is terminated with the last buffered packet itself
+    * instead of waiting for the inactivity timeout. */
+    WMI_VDEV_PARAM_TXSP_END_INACTIVITY_TIME_MS,
+
+    /** DTIM policy */
+    WMI_VDEV_PARAM_DTIM_POLICY,
+
+    /* When IBSS network is initialized, PS-supporting device
+    * does not enter protocol sleep state during first
+    * WMI_VDEV_PARAM_IBSS_PS_WARMUP_TIME_SECS seconds. */
+    WMI_VDEV_PARAM_IBSS_PS_WARMUP_TIME_SECS,
+
+    /* Enable/Disable 1 RX chain usage during the ATIM window */
+    WMI_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE,
+
+    /* RX Leak window is the time driver waits before shutting down
+     * the radio or switching the channel and after receiving an ACK
+     * for a data frame with PM bit set) */
+    WMI_VDEV_PARAM_RX_LEAK_WINDOW,
+
+    /** Averaging factor(16 bit value) is used in the calculations to
+     * perform averaging of different link level statistics like average
+     * beacon spread or average number of frames leaked */
+    WMI_VDEV_PARAM_STATS_AVG_FACTOR,
+
+    /** disconnect threshold, once the consecutive error for specific peer
+     * exceed this threhold, FW will send kickout event to host */
+    WMI_VDEV_PARAM_DISCONNECT_TH,
+
+    /** The rate_code of RTS_CTS changed by host. Now FW can support
+     * more non-HT rates rather than 1Mbps or 6Mbps */
+    WMI_VDEV_PARAM_RTSCTS_RATE,
+
+    /** This parameter indicates whether using a long duration RTS-CTS
+     * protection when a SAP goes off channel in MCC mode */
+    WMI_VDEV_PARAM_MCC_RTSCTS_PROTECTION_ENABLE,
+
+    /** This parameter indicates whether using a broadcast probe response
+     * to increase the detectability of SAP in MCC mode */
+    WMI_VDEV_PARAM_MCC_BROADCAST_PROBE_ENABLE,
+
+    /** This parameter indicates the power backoff in percentage
+     * currently supports 100%, 50%, 25%, 12.5%, and minimum
+     * Host passes 0, 1, 2, 3, 4 to Firmware
+     * 0 --> 100% --> no changes, 1 --> 50% --> -3dB,
+     * 2 --> 25% --> -6dB, 3 --> 12.5% --> -9dB, 4 --> minimum --> -32dB
+     */
+    WMI_VDEV_PARAM_TXPOWER_SCALE,
+
+    /** TX power backoff in dB: tx power -= param value
+     * Host passes values(DB) to Halphy, Halphy reduces the power table
+     * by the values.  Safety check will happen in Halphy.
+     */
+    WMI_VDEV_PARAM_TXPOWER_SCALE_DECR_DB,
+
+    /** Multicast to Unicast conversion setting */
+    WMI_VDEV_PARAM_MCAST2UCAST_SET,
+
+    /** Total number of HW retries */
+    WMI_VDEV_PARAM_RC_NUM_RETRIES,
+
+    /** Max tx percentage for cabq */
+    WMI_VDEV_PARAM_CABQ_MAXDUR,
+
+    /** MFPTEST settings */
+    WMI_VDEV_PARAM_MFPTEST_SET,
+
+    /** RTS Fixed rate setting */
+    WMI_VDEV_PARAM_RTS_FIXED_RATE,
+
+    /** VHT SGI MASK */
+    WMI_VDEV_PARAM_VHT_SGIMASK,
+
+    /** VHT80 Auto Rate MASK */
+    WMI_VDEV_PARAM_VHT80_RATEMASK,
+
+    /** set Proxy STA features for this vap */
+    WMI_VDEV_PARAM_PROXY_STA,
+
+    /** set virtual cell mode - enable/disable */
+    WMI_VDEV_PARAM_VIRTUAL_CELL_MODE,
+
+    /** Set receive packet type */
+    WMI_VDEV_PARAM_RX_DECAP_TYPE,
+
+    /** Set ratemask with specific Bandwidth and NSS */
+    WMI_VDEV_PARAM_BW_NSS_RATEMASK,
+
+    /** Set SENSOR Support */
+    WMI_VDEV_PARAM_SENSOR_AP,
+
+    /** Set beacon rate */
+    WMI_VDEV_PARAM_BEACON_RATE,
+
+    /** Enable CTS to self for DTIM beacon */
+    WMI_VDEV_PARAM_DTIM_ENABLE_CTS,
+
+    /** Disable station kickout at Vap level */
+    WMI_VDEV_PARAM_STA_KICKOUT,
+
+    /* VDEV capabilities */
+    WMI_VDEV_PARAM_CAPABILITIES, /* see capabilities defs below */
+
+    /**
+     * Increment TSF in micro seconds to avoid beacon collision on mesh VAP.
+     * The host must ensure that either no other vdevs share the TSF with
+     * this vdev, or else that it is acceptable to apply this TSF adjustment
+     * to all vdevs sharing the TSF.
+     */
+    WMI_VDEV_PARAM_TSF_INCREMENT,
+
+    /** Disable/Enable AMPDU of vdev per AC:
+     * bit | AC
+     * --------
+     *  0  | VO
+     *  1  | VI
+     *  2  | BE
+     *  3  | BK
+     * A value of 0 in a given bit disables A-MPDU aggregation for
+     * that AC; a value of 1 enables A-MPDU aggregation
+     */
+    WMI_VDEV_PARAM_AMPDU_PER_AC,
+
+    /**
+     * Vdev level rx filter of from-ds / to-ds / no-ds / ta / ra frames.
+     * Used mainly for mesh-vap.
+     * The parameter value delivered with the RX_FILTER vdev param contains
+     * a bit-or mask of wmi_vdev_param_filter enum values.
+     */
+    WMI_VDEV_PARAM_RX_FILTER,
+
+    /** vdev-specific mgmt tx power in dBm units (signed integer value) */
+    WMI_VDEV_PARAM_MGMT_TX_POWER,
+
+    /** Vdev level non aggregration/11g sw retry threshold. 0-disable, min:0, max:31, default:15 */
+    WMI_VDEV_PARAM_NON_AGG_SW_RETRY_TH,
+    /** Vdev level aggregration sw retry threshold. 0-disable, min:0, max:31, default:15 */
+    WMI_VDEV_PARAM_AGG_SW_RETRY_TH,
+
+    /** disable dynamic bw RTS **/
+    WMI_VDEV_PARAM_DISABLE_DYN_BW_RTS,
+
+    /** per ssid (vdev) based ATF strict/fair scheduling policy
+     *  param values are WMI_ATF_SSID_FAIR_SCHED or WMI_ATF_SSID_STRICT_SCHED
+     */
+    WMI_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
+
+
+    /*=== ADD NEW VDEV PARAM TYPES ABOVE THIS LINE ===
+     * The below vdev param types are used for prototyping, and are
+     * prone to change.
+     */
+    WMI_VDEV_PARAM_PROTOTYPE = 0x8000,
+        /* 11AX SPECIFIC defines */
+        WMI_VDEV_PARAM_BSS_COLOR,
+        /* In case of AP this will enable / disable MU-MIMO mode */
+        WMI_VDEV_PARAM_SET_UL_MU_MIMO,
+        /* set fragmentation level of the vdev's peers.
+         * Values can be WMI_HE_FRAG_SUPPORT_LEVEL0..WMI_HE_FRAG_SUPPORT_LEVEL3
+         */
+        WMI_VDEV_PARAM_SET_FRAG_LEVEL,
+        /* control different features of HEControl:
+         *     Bit 0:- 1/0-> Enable/Disable transmssion of UL scheduling.
+         *     Bit 1:- 1/0-> Enable / disable honoring of ROMI from a peer.
+         *                   Applicable in AP mode only.
+         */
+        WMI_VDEV_PARAM_SET_HECONTROL,
+        /* enable / disable trigger access for a AP vdev's peers.
+         * For a STA mode vdev this will enable/disable triggered access
+         * and enable/disable Multi User mode of operation.
+         */
+        WMI_VDEV_PARAM_SET_HEMU_MODE,
+        /* For Tx OFDMA this will set values of CP length or guard interval
+         * to be
+         *     0: Auto
+         *     1: 0.8 us
+         *     2: 1.6 us
+         *     3: 3.2 us
+         * Similar to Guard Interval
+         */
+        WMI_VDEV_PARAM_TX_OFDMA_CPLEN,
+    /*=== END VDEV_PARAM_PROTOTYPE SECTION ===*/
+} WMI_VDEV_PARAM;
+
+/* vdev capabilities bit mask */
+#define WMI_VDEV_BEACON_SUPPORT  0x1
+#define WMI_VDEV_WDS_LRN_ENABLED 0x2
+#define WMI_VDEV_VOW_ENABLED     0x4
+
+#define WMI_VDEV_IS_BEACON_SUPPORTED(param) ((param) & WMI_VDEV_BEACON_SUPPORT)
+#define WMI_VDEV_IS_WDS_LRN_ENABLED(param) ((param) & WMI_VDEV_WDS_LRN_ENABLED)
+#define WMI_VDEV_IS_VOW_ENABLED(param) ((param) & WMI_VDEV_VOW_ENABLED)
+
+/* TXBF capabilities masks */
+#define WMI_TXBF_CONF_SU_TX_BFEE_S 0
+#define WMI_TXBF_CONF_SU_TX_BFEE_M 0x1
+#define WMI_TXBF_CONF_SU_TX_BFEE (WMI_TXBF_CONF_SU_TX_BFEE_M << WMI_TXBF_CONF_SU_TX_BFEE_S)
+#define WMI_TXBF_CONF_SU_TX_BFEE_GET(x) WMI_F_MS(x,WMI_TXBF_CONF_SU_TX_BFEE)
+#define WMI_TXBF_CONF_SU_TX_BFEE_SET(x,z) WMI_F_RMW(x,z,WMI_TXBF_CONF_SU_TX_BFEE)
+
+#define WMI_TXBF_CONF_MU_TX_BFEE_S 1
+#define WMI_TXBF_CONF_MU_TX_BFEE_M 0x1
+#define WMI_TXBF_CONF_MU_TX_BFEE (WMI_TXBF_CONF_MU_TX_BFEE_M << WMI_TXBF_CONF_MU_TX_BFEE_S)
+#define WMI_TXBF_CONF_MU_TX_BFEE_GET(x) WMI_F_MS(x,WMI_TXBF_CONF_MU_TX_BFEE)
+#define WMI_TXBF_CONF_MU_TX_BFEE_SET(x,z) WMI_F_RMW(x,z,WMI_TXBF_CONF_MU_TX_BFEE)
+
+#define WMI_TXBF_CONF_SU_TX_BFER_S 2
+#define WMI_TXBF_CONF_SU_TX_BFER_M 0x1
+#define WMI_TXBF_CONF_SU_TX_BFER (WMI_TXBF_CONF_SU_TX_BFER_M << WMI_TXBF_CONF_SU_TX_BFER_S)
+#define WMI_TXBF_CONF_SU_TX_BFER_GET(x) WMI_F_MS(x,WMI_TXBF_CONF_SU_TX_BFER)
+#define WMI_TXBF_CONF_SU_TX_BFER_SET(x,z) WMI_F_RMW(x,z,WMI_TXBF_CONF_SU_TX_BFER)
+
+#define WMI_TXBF_CONF_MU_TX_BFER_S 3
+#define WMI_TXBF_CONF_MU_TX_BFER_M 0x1
+#define WMI_TXBF_CONF_MU_TX_BFER (WMI_TXBF_CONF_MU_TX_BFER_M << WMI_TXBF_CONF_MU_TX_BFER_S)
+#define WMI_TXBF_CONF_MU_TX_BFER_GET(x) WMI_F_MS(x,WMI_TXBF_CONF_MU_TX_BFER)
+#define WMI_TXBF_CONF_MU_TX_BFER_SET(x,z) WMI_F_RMW(x,z,WMI_TXBF_CONF_MU_TX_BFER)
+
+#define WMI_TXBF_CONF_STS_CAP_S 4
+#define WMI_TXBF_CONF_STS_CAP_M 0x7
+#define WMI_TXBF_CONF_STS_CAP (WMI_TXBF_CONF_STS_CAP_M << WMI_TXBF_CONF_STS_CAP_S)
+#define WMI_TXBF_CONF_STS_CAP_GET(x) WMI_F_MS(x,WMI_TXBF_CONF_STS_CAP);
+#define WMI_TXBF_CONF_STS_CAP_SET(x,z) WMI_F_RMW(x,z,WMI_TXBF_CONF_STS_CAP)
+
+#define WMI_TXBF_CONF_IMPLICIT_BF_S 7
+#define WMI_TXBF_CONF_IMPLICIT_BF_M 0x1
+#define WMI_TXBF_CONF_IMPLICIT_BF (WMI_TXBF_CONF_IMPLICIT_BF_M << WMI_TXBF_CONF_IMPLICIT_BF_S)
+#define WMI_TXBF_CONF_IMPLICIT_BF_GET(x) WMI_F_MS(x,WMI_TXBF_CONF_IMPLICIT_BF)
+#define WMI_TXBF_CONF_IMPLICIT_BF_SET(x,z) WMI_F_RMW(x,z,WMI_TXBF_CONF_IMPLICIT_BF)
+
+#define WMI_TXBF_CONF_BF_SND_DIM_S 8
+#define WMI_TXBF_CONF_BF_SND_DIM_M 0x7
+#define WMI_TXBF_CONF_BF_SND_DIM (WMI_TXBF_CONF_BF_SND_DIM_M << WMI_TXBF_CONF_BF_SND_DIM_S)
+#define WMI_TXBF_CONF_BF_SND_DIM_GET(x) WMI_F_MS(x,WMI_TXBF_CONF_BF_SND_DIM)
+#define WMI_TXBF_CONF_BF_SND_DIM_SET(x,z) WMI_F_RMW(x,z,WMI_TXBF_CONF_BF_SND_DIM)
+
+/* TXBF capabilities */
+typedef struct {
+    A_UINT32 txbf_cap;
+} wmi_vdev_txbf_cap;
+
+/* vdev rx filters (for mesh) */
+typedef enum {
+    WMI_VDEV_RX_ALLOW_ALL_FRAMES  =  0x0, /* Don't drop any frames - Default */
+    WMI_VDEV_RX_FILTER_OUT_FROMDS =  0x1, /* Drop FromDS frames */
+    WMI_VDEV_RX_FILTER_OUT_TODS   =  0x2, /* Drop ToDS frames */
+    WMI_VDEV_RX_FILTER_OUT_NODS   =  0x4, /* Drop NODS frames */
+    WMI_VDEV_RX_FILTER_OUT_RA     =  0x8, /* Drop RA frames */
+    WMI_VDEV_RX_FILTER_OUT_TA     = 0x10, /* Drop TA frames */
+} wmi_vdev_param_filter;
+
+/* Length of ATIM Window in TU */
+#define WMI_VDEV_PARAM_ATIM_WINDOW_LENGTH WMI_VDEV_PARAM_ATIM_WINDOW
+
+enum wmi_pkt_type {
+    WMI_PKT_TYPE_RAW = 0,
+    WMI_PKT_TYPE_NATIVE_WIFI = 1,
+    WMI_PKT_TYPE_ETHERNET = 2,
+};
+
+/*******************************************************************
+ * wmi_vdev_txbf_en is DEPRECATED in favor of wmi_vdev_txbf_cap
+ * Do not use it!
+ *******************************************************************/
+typedef struct {
+    A_UINT8     sutxbfee    : 1,
+                mutxbfee    : 1,
+                sutxbfer    : 1,
+                mutxbfer    : 1,
+                txb_sts_cap : 3,
+                implicit_bf : 1;
+} wmi_vdev_txbf_en;
+
+/** Upto 8 bits are available for Roaming module to be sent along with
+WMI_VDEV_PARAM_ROAM_FW_OFFLOAD WMI_VDEV_PARAM **/
+/* Enable Roaming FW offload LFR1.5/LFR2.0 implementation */
+#define WMI_ROAM_FW_OFFLOAD_ENABLE_FLAG                          0x1
+/* Enable Roaming module in FW to do scan based on Final BMISS */
+#define WMI_ROAM_BMISS_FINAL_SCAN_ENABLE_FLAG                    0x2
+
+/** slot time long */
+#define WMI_VDEV_SLOT_TIME_LONG                                  0x1
+/** slot time short */
+#define WMI_VDEV_SLOT_TIME_SHORT                                 0x2
+/** preablbe long */
+#define WMI_VDEV_PREAMBLE_LONG                                   0x1
+/** preablbe short */
+#define WMI_VDEV_PREAMBLE_SHORT                                  0x2
+
+/** the definition of different START/RESTART Event response  */
+typedef enum {
+    /* Event respose of START CMD */
+    WMI_VDEV_START_RESP_EVENT = 0,
+    /* Event respose of RESTART CMD */
+    WMI_VDEV_RESTART_RESP_EVENT,
+} WMI_START_EVENT_PARAM;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_start_response_event_fixed_param  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** requestor id that requested the VDEV start request */
+    A_UINT32 requestor_id;
+    /* Respose of Event type START/RESTART */
+    WMI_START_EVENT_PARAM resp_type;
+    /** status of the response */
+    A_UINT32 status;
+    /** Vdev chain mask */
+    A_UINT32 chain_mask;
+    /** Vdev mimo power save mode */
+    A_UINT32 smps_mode;
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    /** Configured Transmit Streams **/
+    A_UINT32 cfgd_tx_streams;
+    /** Configured Receive Streams **/
+    A_UINT32 cfgd_rx_streams;
+} wmi_vdev_start_response_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_stopped_event_fixed_param  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_stopped_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_delete_resp_event_fixed_param  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_delete_resp_event_fixed_param;
+
+/** common structure used for simple events (stopped, resume_req, standby response) */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag would be equivalent to actual event  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_vdev_simple_event_fixed_param;
+
+
+/** VDEV start response status codes */
+#define WMI_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0  /** VDEV succesfully started */
+#define WMI_VDEV_START_RESPONSE_INVALID_VDEVID  0x1  /** requested VDEV not found */
+#define WMI_VDEV_START_RESPONSE_NOT_SUPPORTED  0x2  /** unsupported VDEV combination */
+
+/** Beacon processing related command and event structures */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_tx_hdr */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** xmit rate */
+    A_UINT32 tx_rate;
+    /** xmit power */
+    A_UINT32 txPower;
+    /** beacon buffer length in bytes */
+    A_UINT32 buf_len;
+/* This TLV is followed by array of bytes:
+ *   A_UINT8 bufp[]; <-- beacon frame buffer
+ */
+} wmi_bcn_tx_hdr;
+
+/* Beacon filter */
+#define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
+#define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
+#define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
+#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
+#define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
+
+typedef struct {
+    /** Filter ID */
+    A_UINT32 bcn_filter_id;
+    /** Filter type - wmi_bcn_filter */
+    A_UINT32 bcn_filter;
+    /** Buffer len */
+    A_UINT32 bcn_filter_len;
+    /** Filter info (threshold, BSSID, RSSI) */
+    A_UINT8 *bcn_filter_buf;
+} wmi_bcn_filter_rx_cmd;
+
+/** Capabilities and IEs to be passed to firmware */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_prb_info */
+    /** Capabilities */
+    A_UINT32 caps;
+    /** ERP info */
+    A_UINT32 erp;
+/** Advanced capabilities */
+/** HT capabilities */
+/** HT Info */
+/** ibss_dfs */
+/** wpa Info */
+/** rsn Info */
+/** rrm info */
+/** ath_ext */
+/** app IE */
+} wmi_bcn_prb_info;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_tmpl_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** TIM IE offset from the beginning of the template. */
+    A_UINT32 tim_ie_offset;
+    /** beacon buffer length. data is in TLV data[] */
+    A_UINT32 buf_len;
+
+/*
+ * The TLVs follows:
+ *    wmi_bcn_prb_info bcn_prb_info; <-- beacon probe capabilities and IEs
+ *    A_UINT8  data[]; <-- Variable length data
+ */
+} wmi_bcn_tmpl_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_prb_tmpl_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** beacon buffer length. data is in TLV data[] */
+    A_UINT32 buf_len;
+/*
+ * The TLVs follows:
+ *    wmi_bcn_prb_info bcn_prb_info; <-- beacon probe capabilities and IEs
+ *    A_UINT8  data[]; <-- Variable length data
+ */
+} wmi_prb_tmpl_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_offload_bcn_tx_status_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** bcn tx status, values defined in enum WMI_FRAME_TX_STATUS */
+    A_UINT32 tx_status;
+} wmi_offload_bcn_tx_status_event_fixed_param;
+
+enum wmi_sta_ps_mode {
+    /** enable power save for the given STA VDEV */
+    WMI_STA_PS_MODE_DISABLED = 0,
+    /** disable power save  for a given STA VDEV */
+    WMI_STA_PS_MODE_ENABLED = 1,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_powersave_mode_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+
+    /** Power save mode
+     *
+     * (see enum wmi_sta_ps_mode)
+     */
+    A_UINT32 sta_ps_mode;
+} wmi_sta_powersave_mode_cmd_fixed_param;
+
+enum wmi_csa_offload_en {
+           WMI_CSA_OFFLOAD_DISABLE = 0,
+           WMI_CSA_OFFLOAD_ENABLE = 1,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_csa_offload_enable_cmd_fixed_param  */
+    A_UINT32 vdev_id;
+    A_UINT32 csa_offload_enable;
+} wmi_csa_offload_enable_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_csa_offload_chanswitch_cmd_fixed_param  */
+    A_UINT32 vdev_id;
+/*
+ * The TLVs follows:
+ *    wmi_channel chan;
+ */
+} wmi_csa_offload_chanswitch_cmd_fixed_param;
+/**
+ * This parameter controls the policy for retrieving frames from AP while the
+ * STA is in sleep state.
+ *
+ * Only takes affect if the sta_ps_mode is enabled
+ */
+enum wmi_sta_ps_param_rx_wake_policy {
+    /* Wake up when ever there is an  RX activity on the VDEV. In this mode
+     * the Power save SM(state machine) will come out of sleep by either
+     * sending null frame (or) a data frame (with PS==0) in response to TIM
+     * bit set in the received beacon frame from AP.
+     */
+    WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
+
+    /* Here the power save state machine will not wakeup in response to TIM
+     * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
+     * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
+     * access categories are delivery-enabled, the station will send a UAPSD
+     * trigger frame, otherwise it will send a PS-Poll.
+     */
+    WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
+};
+
+/** Number of tx frames/beacon  that cause the power save SM to wake up.
+ *
+ * Value 1 causes the SM to wake up for every TX. Value 0 has a special
+ * meaning, It will cause the SM to never wake up. This is useful if you want
+ * to keep the system to sleep all the time for some kind of test mode . host
+ * can change this parameter any time.  It will affect at the next tx frame.
+ */
+enum wmi_sta_ps_param_tx_wake_threshold {
+    WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
+    WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
+
+/* Values greater than one indicate that many TX attempts per beacon
+ * interval before the STA will wake up
+ */
+};
+
+/**
+ * The maximum number of PS-Poll frames the FW will send in response to
+ * traffic advertised in TIM before waking up (by sending a null frame with PS
+ * = 0). Value 0 has a special meaning: there is no maximum count and the FW
+ * will send as many PS-Poll as are necessary to retrieve buffered BU. This
+ * parameter is used when the RX wake policy is
+ * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
+ * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
+ */
+enum wmi_sta_ps_param_pspoll_count {
+    WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
+/* Values greater than 0 indicate the maximum numer of PS-Poll frames FW
+ * will send before waking up.
+ */
+};
+
+/*
+ * This will include the delivery and trigger enabled state for every AC.
+ * This is the negotiated state with AP. The host MLME needs to set this based
+ * on AP capability and the state Set in the association request by the
+ * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
+ */
+#define WMI_UAPSD_AC_TYPE_DELI 0
+#define WMI_UAPSD_AC_TYPE_TRIG 1
+
+#define WMI_UAPSD_AC_BIT_MASK(ac,type) \
+    ((type == WMI_UAPSD_AC_TYPE_DELI) ? \
+     (1 << (ac<<1)) : \
+     (1 << ((ac<<1)+1)))
+
+enum wmi_sta_ps_param_uapsd {
+    WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
+    WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
+    WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
+    WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
+    WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
+    WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
+    WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
+    WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
+};
+
+enum wmi_sta_powersave_param {
+/**
+ * Controls how frames are retrievd from AP while STA is sleeping
+ *
+ * (see enum wmi_sta_ps_param_rx_wake_policy)
+ */
+WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
+
+/**
+ * The STA will go active after this many TX
+ *
+ * (see enum wmi_sta_ps_param_tx_wake_threshold)
+ */
+WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
+
+/**
+ * Number of PS-Poll to send before STA wakes up
+ *
+ * (see enum wmi_sta_ps_param_pspoll_count)
+ *
+ */
+WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
+
+/**
+ * TX/RX inactivity time in msec before going to sleep.
+ *
+ * The power save SM will monitor tx/rx activity on the VDEV, if no
+ * activity for the specified msec of the parameter the Power save SM will
+ * go to sleep.
+ */
+WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
+
+/**
+ * Set uapsd configuration.
+ *
+ * (see enum wmi_sta_ps_param_uapsd)
+ */
+WMI_STA_PS_PARAM_UAPSD = 4,
+
+/**
+ * Number of PS-Poll to send before STA wakes up in QPower Mode
+ */
+WMI_STA_PS_PARAM_QPOWER_PSPOLL_COUNT = 5,
+
+/**
+ * Enable QPower
+ */
+WMI_STA_PS_ENABLE_QPOWER = 6,
+
+/**
+ * Number of TX frames before the entering the Active state
+ */
+WMI_STA_PS_PARAM_QPOWER_MAX_TX_BEFORE_WAKE = 7,
+
+/**
+ * QPower SPEC PSPOLL interval
+ */
+WMI_STA_PS_PARAM_QPOWER_SPEC_PSPOLL_WAKE_INTERVAL = 8,
+
+/**
+             * Max SPEC PSPOLL to be sent when the PSPOLL response has
+             * no-data bit set
+ */
+WMI_STA_PS_PARAM_QPOWER_SPEC_MAX_SPEC_NODATA_PSPOLL = 9,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_powersave_param_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** station power save parameter (see enum wmi_sta_powersave_param) */
+    A_UINT32 param;
+    A_UINT32 value;
+} wmi_sta_powersave_param_cmd_fixed_param;
+
+/** No MIMO power save */
+#define WMI_STA_MIMO_PS_MODE_DISABLE
+/** mimo powersave mode static*/
+#define WMI_STA_MIMO_PS_MODE_STATIC
+/** mimo powersave mode dynamic */
+#define WMI_STA_MIMO_PS_MODE_DYNAMI
+
+typedef struct {
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** mimo powersave mode as defined above */
+    A_UINT32 mimo_pwrsave_mode;
+} wmi_sta_mimo_ps_mode_cmd;
+
+
+/** U-APSD configuration of peer station from (re)assoc request and TSPECs */
+enum wmi_ap_ps_param_uapsd {
+    WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
+    WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
+    WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
+    WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
+    WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
+    WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
+    WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
+    WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
+};
+
+/** U-APSD maximum service period of peer station */
+enum wmi_ap_ps_peer_param_max_sp {
+    WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
+    WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
+    WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
+    WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
+
+    /* keep last! */
+    MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
+};
+
+/** param values for WMI_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE */
+enum wmi_ap_ps_param_sifs_resp_frmtype {
+    WMI_SIFS_RESP_PSPOLL    = (1 << 0),
+    WMI_SIFS_RESP_UAPSD     = (1 << 1),
+    WMI_SIFS_RESP_QBST_EXP  = (1 << 2),
+    WMI_SIFS_RESP_QBST_DATA = (1 << 3),
+    WMI_SIFS_RESP_QBST_BAR  = (1 << 4),
+};
+
+/**
+ * AP power save parameter
+ * Set a power save specific parameter for a peer station
+ */
+enum wmi_ap_ps_peer_param {
+    /** Set uapsd configuration for a given peer.
+     *
+     * This will include the delivery and trigger enabled state for every AC.
+     * The host  MLME needs to set this based on AP capability and stations
+     * request Set in the association request  received from the station.
+     *
+     * Lower 8 bits of the value specify the UAPSD configuration.
+     *
+     * (see enum wmi_ap_ps_param_uapsd)
+     * The default value is 0.
+     */
+    WMI_AP_PS_PEER_PARAM_UAPSD = 0,
+
+    /**
+     * Set the service period for a UAPSD capable station
+     *
+     * The service period from wme ie in the (re)assoc request frame.
+     *
+     * (see enum wmi_ap_ps_peer_param_max_sp)
+     */
+    WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
+
+    /** Time in seconds for aging out buffered frames for STA in power save */
+    WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
+
+    /**
+     * Specify frame types that are considered SIFS RESP trigger frame
+     * (see enum wmi_ap_ps_param_sifs_resp_frmtype)
+     */
+    WMI_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE = 3,
+
+    /** Specifies the trigger state of TID. Valid only for UAPSD frame type  */
+    WMI_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD = 4,
+
+    /** Specifies the WNM sleep state of a STA */
+    WMI_AP_PS_PEER_PARAM_WNM_SLEEP = 5,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ap_ps_peer_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** AP powersave param (see enum wmi_ap_ps_peer_param) */
+    A_UINT32 param;
+    /** AP powersave param value (see defines) */
+    A_UINT32 value;
+} wmi_ap_ps_peer_cmd_fixed_param;
+
+/** Configure peer station 11v U-APSD coexistance
+ *
+ * Two parameters from uaspd coexistence ie info (as specified in 11v) are
+ * sent down to FW along with this command.
+ *
+ * The semantics of these fields are described in the following text extracted
+ * from 802.11v.
+ *
+ * ---  If the non-AP STA specified a non-zero TSF 0 Offset value in the
+ *      U-APSD Coexistence element, the AP should not transmit frames to the
+ *      non-AP STA outside of the U-APSD Coexistence Service Period, which
+ *      begins when the AP receives the U-APSD trigger frame and ends after
+ *      the transmission period specified by the result of the following
+ *      calculation:
+ *
+ *          End of transmission period = T + (Interval . ((T . TSF 0 Offset) mod Interval))
+ *
+ *      Where T is the time the U-APSD trigger frame was received at the AP
+ *      Interval is the UAPSD Coexistence element Duration/Interval field
+ *      value (see 7.3.2.91) or upon the successful transmission of a frame
+ *      with EOSP bit set to 1, whichever is earlier.
+ *
+ *
+ * ---  If the non-AP STA specified a zero TSF 0 Offset value in the U-APSD
+ *      Coexistence element, the AP should not transmit frames to the non-AP
+ *      STA outside of the U-APSD Coexistence Service Period, which begins
+ *      when the AP receives a U-APSD trigger frame and ends after the
+ *      transmission period specified by the result of the following
+ *      calculation: End of transmission period = T + Duration
+ */
+typedef struct {
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** Enable U-APSD coexistence support for this peer
+     *
+     * 0 -> disabled (default)
+     * 1 -> enabled
+     */
+    A_UINT32 enabled;
+    /** Duration/Interval as defined by 11v U-ASPD coexistance */
+    A_UINT32 duration_interval;
+    /** Upper 32 bits of 64-bit TSF offset */
+    A_UINT32 tsf_offset_high;
+    /** Lower 32 bits of 64-bit TSF offset */
+    A_UINT32 tsf_offset_low;
+} wmi_ap_powersave_peer_uapsd_coex_cmd;
+
+typedef enum {
+    WMI_AP_PS_EGAP_F_ENABLE_PHYERR_DETECTION      = 0x0001,
+    WMI_AP_PS_EGAP_F_ENABLE_PWRSAVE_BY_PS_STATE   = 0x0002,
+    WMI_AP_PS_EGAP_F_ENABLE_PWRSAVE_BY_INACTIVITY = 0x0004,
+
+    WMI_AP_PS_EGAP_FLAG_MAX = 0x8000
+} wmi_ap_ps_egap_flag_type;
+
+/**
+ * configure ehanced green ap parameters
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_ap_powersave_egap_param_cmd_fixed_param  */
+    /** Enable enhanced green ap
+     * 0 -> disabled
+     * 1 -> enabled
+     */
+    A_UINT32 enable;
+    /** The param indicates a duration that all STAs connected
+     * to S-AP have no traffic.
+     */
+    A_UINT32 inactivity_time; /* in unit of milliseconds */
+    /** The param indicates a duration that all STAs connected
+     * to S-AP have no traffic, after all STAs have entered powersave.
+     */
+    A_UINT32 wait_time; /* in unit of milliseconds */
+    /** The param is used to turn on/off some functions within E-GAP.
+     */
+    A_UINT32 flags; /* wmi_ap_ps_egap_flag_type bitmap */
+} wmi_ap_ps_egap_param_cmd_fixed_param;
+
+typedef enum {
+    WMI_AP_PS_EGAP_STATUS_IDLE        = 1,
+    WMI_AP_PS_EGAP_STATUS_PWRSAVE_OFF = 2,
+    WMI_AP_PS_EGAP_STATUS_PWRSAVE_ON  = 3,
+
+    WMI_AP_PS_EGAP_STATUS_MAX = 15
+} wmi_ap_ps_egap_status_type;
+
+/**
+ * send ehanced green ap status to host
+ */
+typedef struct
+{
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_ap_ps_egap_info_chainmask_list */
+    A_UINT32 tlv_header;
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    /** The param indicates the current tx chainmask with the mac id. */
+    A_UINT32 tx_chainmask;
+    /** The param indicates the current rx chainmask with the mac id. */
+    A_UINT32 rx_chainmask;
+} wmi_ap_ps_egap_info_chainmask_list;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_ap_powersave_egap_param_cmd_fixed_param  */
+    /** Enhanced green ap status (WMI_AP_PS_EGAP_STATUS). */
+    A_UINT32 status;
+/* This TLV is followed by
+ *     wmi_ap_ps_egap_info_chainmask_list chainmask_list[];
+ */
+} wmi_ap_ps_egap_info_event_fixed_param;
+
+/* 128 clients = 4 words */
+/* WMI_TIM_BITMAP_ARRAY_SIZE can't be modified without breaking the compatibility */
+#define WMI_TIM_BITMAP_ARRAY_SIZE 4
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tim_info  */
+    /** TIM bitmap len (in bytes)*/
+    A_UINT32 tim_len;
+    /** TIM Partial Virtual Bitmap */
+    A_UINT32 tim_mcast;
+    A_UINT32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
+    A_UINT32 tim_changed;
+    A_UINT32 tim_num_ps_pending;
+} wmi_tim_info;
+
+typedef struct {
+    /** Flag to enable quiet period IE support */
+    A_UINT32 is_enabled;
+    /** Quiet start */
+    A_UINT32 tbttcount;
+    /** Beacon intervals between quiets*/
+    A_UINT32 period;
+    /** TUs of each quiet*/
+    A_UINT32 duration;
+    /** TUs of from TBTT of quiet start*/
+    A_UINT32 offset;
+} wmi_quiet_info;
+
+/* WMI_P2P_MAX_NOA_DESCRIPTORS can't be modified without breaking the compatibility */
+#define WMI_P2P_MAX_NOA_DESCRIPTORS 4   /* Maximum number of NOA Descriptors supported */
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_noa_info  */
+    /** Bit  0:     Flag to indicate an update in NOA schedule
+     *  Bits 7-1:   Reserved
+     *  Bits 15-8:  Index (identifies the instance of NOA sub element)
+     *  Bit  16:    Opp PS state of the AP
+     *  Bits 23-17: Ctwindow in TUs
+     *  Bits 31-24: Number of NOA descriptors
+     */
+    A_UINT32 noa_attributes;
+    wmi_p2p_noa_descriptor noa_descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
+} wmi_p2p_noa_info;
+
+#define WMI_UNIFIED_NOA_ATTR_MODIFIED       0x1
+#define WMI_UNIFIED_NOA_ATTR_MODIFIED_S     0
+
+#define WMI_UNIFIED_NOA_ATTR_IS_MODIFIED(hdr)                       \
+            WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_MODIFIED)
+
+#define WMI_UNIFIED_NOA_ATTR_MODIFIED_SET(hdr)                      \
+            WMI_F_RMW((hdr)->noa_attributes, 0x1,                   \
+                WMI_UNIFIED_NOA_ATTR_MODIFIED);
+
+#define WMI_UNIFIED_NOA_ATTR_INDEX          0xff00
+#define WMI_UNIFIED_NOA_ATTR_INDEX_S        8
+
+#define WMI_UNIFIED_NOA_ATTR_INDEX_GET(hdr)                         \
+            WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_INDEX)
+
+#define WMI_UNIFIED_NOA_ATTR_INDEX_SET(hdr, v)                      \
+            WMI_F_RMW((hdr)->noa_attributes, (v) & 0xff,            \
+                WMI_UNIFIED_NOA_ATTR_INDEX);
+
+#define WMI_UNIFIED_NOA_ATTR_OPP_PS         0x10000
+#define WMI_UNIFIED_NOA_ATTR_OPP_PS_S       16
+
+#define WMI_UNIFIED_NOA_ATTR_OPP_PS_GET(hdr)                         \
+            WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_OPP_PS)
+
+#define WMI_UNIFIED_NOA_ATTR_OPP_PS_SET(hdr)                         \
+            WMI_F_RMW((hdr)->noa_attributes, 0x1,                    \
+                WMI_UNIFIED_NOA_ATTR_OPP_PS);
+
+#define WMI_UNIFIED_NOA_ATTR_CTWIN          0xfe0000
+#define WMI_UNIFIED_NOA_ATTR_CTWIN_S        17
+
+#define WMI_UNIFIED_NOA_ATTR_CTWIN_GET(hdr)                          \
+            WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_CTWIN)
+
+#define WMI_UNIFIED_NOA_ATTR_CTWIN_SET(hdr, v)                       \
+            WMI_F_RMW((hdr)->noa_attributes, (v) & 0x7f,             \
+                WMI_UNIFIED_NOA_ATTR_CTWIN);
+
+#define WMI_UNIFIED_NOA_ATTR_NUM_DESC       0xff000000
+#define WMI_UNIFIED_NOA_ATTR_NUM_DESC_S     24
+
+#define WMI_UNIFIED_NOA_ATTR_NUM_DESC_GET(hdr)                       \
+            WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_NUM_DESC)
+
+#define WMI_UNIFIED_NOA_ATTR_NUM_DESC_SET(hdr, v)                    \
+            WMI_F_RMW((hdr)->noa_attributes, (v) & 0xff,             \
+                WMI_UNIFIED_NOA_ATTR_NUM_DESC);
+
+typedef struct {
+    /** TIM info */
+    wmi_tim_info tim_info;
+    /** P2P NOA info */
+    wmi_p2p_noa_info p2p_noa_info;
+/* TBD: More info elements to be added later */
+} wmi_bcn_info;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_host_swba_event_fixed_param  */
+    /** bitmap identifying the VDEVs, generated by the caller */
+    A_UINT32 vdev_map;
+/* This TLV is followed by tim_info and p2p_noa_info for each vdev in vdevmap :
+ *     wmi_tim_info tim_info[];
+ *     wmi_p2p_noa_info p2p_noa_info[];
+ *
+ */
+} wmi_host_swba_event_fixed_param;
+
+#define WMI_MAX_AP_VDEV 16
+
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tbtt_offset_event_fixed_param  */
+    /** bimtap of VDEVs that has tbtt offset updated */
+    A_UINT32 vdev_map;
+/* The TLVs for tbttoffset_list will follow this TLV.
+ *     tbtt offset list in the order of the LSB to MSB in the vdev_map bitmap
+ *     A_UINT32 tbttoffset_list[WMI_MAX_AP_VDEV];
+ */
+} wmi_tbtt_offset_event_fixed_param;
+
+
+/* Peer Specific commands and events */
+
+typedef struct {
+    A_UINT32 percentage; /* in unit of 12.5% */
+    A_UINT32 min_delta;  /* in unit of Mbps */
+} rate_delta_t;
+
+#define PEER_RATE_REPORT_COND_FLAG_DELTA        0x01
+#define PEER_RATE_REPORT_COND_FLAG_THRESHOLD    0x02
+#define MAX_NUM_OF_RATE_THRESH                  4
+
+typedef struct {
+    A_UINT32 val_cond_flags;     /* PEER_RATE_REPORT_COND_FLAG_DELTA, PEER_RATE_REPORT_COND_FLAG_THRESHOLD
+                                    Any of these two conditions or both of them can be set. */
+    rate_delta_t rate_delta;
+    A_UINT32 rate_threshold[MAX_NUM_OF_RATE_THRESH];  /* In unit of Mbps. There are at most 4 thresholds.
+                                                         If the threshold count is less than 4, set zero to
+                                                         the one following the last threshold */
+} report_cond_per_phy_t;
+
+
+enum peer_rate_report_cond_phy_type {
+    PEER_RATE_REPORT_COND_11B = 0,
+    PEER_RATE_REPORT_COND_11A_G,
+    PEER_RATE_REPORT_COND_11N,
+    PEER_RATE_REPORT_COND_11AC,
+    PEER_RATE_REPORT_COND_MAX_NUM
+};
+
+typedef struct {
+    A_UINT32 tlv_header;                     /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_rate_report_condtion_fixed_param */
+    A_UINT32 enable_rate_report;             /* 1= enable, 0=disable */
+    A_UINT32 report_backoff_time;            /* in unit of msecond */
+    A_UINT32 report_timer_period;            /* in unit of msecond */
+    /* In the following field, the array index means the phy type,
+     * please see enum peer_rate_report_cond_phy_type for detail */
+    report_cond_per_phy_t cond_per_phy[PEER_RATE_REPORT_COND_MAX_NUM];
+} wmi_peer_set_rate_report_condition_fixed_param;
+
+/* Peer Type:
+ * NB: This can be left DEFAULT for the normal case, and f/w will determine BSS type based
+ * on address and vdev opmode. This is largely here to allow host to indicate that
+ * peer is explicitly a TDLS peer
+ */
+enum wmi_peer_type {
+    WMI_PEER_TYPE_DEFAULT = 0,    /* Generic/Non-BSS/Self Peer */
+    WMI_PEER_TYPE_BSS = 1,        /* Peer is BSS Peer entry */
+    WMI_PEER_TYPE_TDLS = 2,       /* Peer is a TDLS Peer */
+    WMI_PEER_TYPE_OCB = 3,        /* Peer is a OCB Peer */
+    WMI_PEER_TYPE_NAN_DATA = 4,   /* Peer is NAN DATA */
+    WMI_PEER_TYPE_HOST_MAX = 127, /* Host <-> Target Peer type is assigned up to 127 */
+                                  /* Reserved from 128 - 255 for target internal use.*/
+    WMI_PEER_TYPE_ROAMOFFLOAD_TEMP = 128, /* Temporarily created during offload roam */
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_create_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** peer type: see enum values above */
+    A_UINT32 peer_type;
+} wmi_peer_create_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_delete_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_peer_delete_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_set_rx_blocksize_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /**
+     * maximum block ack window size to use during a rx block ack negotiation,
+     * i.e. the maximum number of MPDUs per A-MPDU that will be received
+     */
+    A_UINT32  rx_block_ack_win_limit;
+} wmi_peer_set_rx_blocksize_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_flush_tids_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** tid bitmap identifying the tids to flush */
+    A_UINT32 peer_tid_bitmap;
+} wmi_peer_flush_tids_cmd_fixed_param;
+
+typedef struct {
+    /** rate mode . 0: disable fixed rate (auto rate)
+     *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
+     *   2: ht20 11n rate  specified as mcs index
+     *   3: ht40 11n rate  specified as mcs index
+     */
+    A_UINT32 rate_mode;
+    /** 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
+     *  and series 3 is stored at byte 3 (MSB) */
+    A_UINT32 rate_series;
+    /** 4 retry counts for 4 rate series. retry count for rate 0 is stored in byte 0 (LSB)
+     *  and retry count for rate 3 is stored at byte 3 (MSB) */
+    A_UINT32 rate_retries;
+} wmi_fixed_rate;
+
+typedef struct {
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** fixed rate */
+    wmi_fixed_rate peer_fixed_rate;
+} wmi_peer_fixed_rate_cmd;
+
+#define WMI_MGMT_TID    17
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_addba_clear_resp_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_addba_clear_resp_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_addba_send_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+    /** Buffer/Window size*/
+    A_UINT32 buffersize;
+} wmi_addba_send_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_delba_send_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+    /** Is Initiator */
+    A_UINT32 initiator;
+    /** Reason code */
+    A_UINT32 reasoncode;
+} wmi_delba_send_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_addba_setresponse_cmd_fixed_param */
+    /** unique id identifying the vdev, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer mac address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+    /** status code */
+    A_UINT32 statuscode;
+} wmi_addba_setresponse_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_send_singleamsdu_cmd_fixed_param */
+    /** unique id identifying the vdev, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer mac address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+} wmi_send_singleamsdu_cmd_fixed_param;
+
+/* Type of Station DTIM Power Save method */
+enum {
+    /* For NORMAL DTIM, the parameter is the number of beacon intervals and
+     * also the same value as the listen interval. For this method, the
+     * station will wake up based on the listen interval. If this
+     * listen interval is not equal to DTIM, then the station may
+     * miss certain DTIM beacons. If this value is 1, then the
+     * station will wake up for every beacon.
+     */
+    WMI_STA_DTIM_PS_NORMAL_DTIM = 0x01,
+    /* For MODULATED_DTIM, parameter is a multiple of DTIM beacons to skip.
+     * When this value is 1, then the station will wake at every DTIM beacon.
+     * If this value is >1, then the station will skip certain DTIM beacons.
+     * This value is the multiple of DTIM intervals that the station will
+     * wake up to receive the DTIM beacons.
+     */
+    WMI_STA_DTIM_PS_MODULATED_DTIM = 0x02,
+};
+
+/* Parameter structure for the WMI_STA_DTIM_PS_METHOD_CMDID */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_dtim_ps_method_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** Station DTIM Power Save method as defined above */
+    A_UINT32 dtim_pwrsave_method;
+    /** DTIM PS value. Contents depends on the method */
+    A_UINT32 value;
+    /** Modulated DTIM value */
+    A_UINT32 MaxLIModulatedDTIM;
+} wmi_sta_dtim_ps_method_cmd_fixed_param;
+
+/*
+ * For Station UAPSD Auto Trigger feature, the Firmware monitors the
+ * uAPSD uplink and downlink traffic for each uAPSD enabled WMM ACs.
+ * If there is no uplink/download for the specified service interval (field service_interval),
+ * firmware will auto generate a QOS-NULL trigger for that WMM-AP with the TID value
+ * specified in the UP (field user_priority).
+ * Firmware also monitors the responses for these QOS-NULL triggers.
+ * If the peer does not have any delivery frames, it will respond with
+ * QOS-NULL (EOSP=1). This feature of only using service interval is assumed to be mandatory for all
+ * firmware implementation. For this basic implementation, the suspend_interval and delay_interval
+ * are unused and should be set to 0.
+ * When service_interval is 0, then the firmware will not send any trigger frames. This is for
+ * certain host-based implementations that don't want this firmware offload.
+ * Note that the per-AC intervals are required for some usage scenarios. This is why the intervals
+ * are given in the array of ac_param[]. For example, Voice service interval may defaults to 20 ms
+ * and rest of the AC default to 300 ms.
+ *
+ * The service bit, WMI_STA_UAPSD_VAR_AUTO_TRIG, will indicate that the more advanced feature
+ * of variable auto trigger is supported. The suspend_interval and delay_interval is used in
+ * the more advanced monitoring method.
+ * If the PEER does not have any delivery enabled data frames (non QOS-NULL) for the
+ * suspend interval (field suspend_interval), firmware will change its auto trigger interval
+ * to delay interval (field delay_interval). This way, when there is no traffic, the station
+ * will save more power by waking up less and sending less trigger frames.
+ * The (service_interval < suspend_interval) and (service_interval < delay_interval).
+ * If this variable auto trigger is not required, then the suspend_interval and delay_interval
+ * should be 0.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_param */
+    /** WMM Access category from 0 to 3 */
+    A_UINT32 wmm_ac;
+    /** User priority to use in trigger frames. It is the TID
+     *  value. This field needs to be specified and may not be
+     *  equivalent to AC since some implementation may use the TSPEC
+     *  to enable UAPSD and negotiate a particular user priority. */
+    A_UINT32 user_priority;
+    /** service interval in ms */
+    A_UINT32 service_interval;
+    /** Suspend interval in ms */
+    A_UINT32 suspend_interval;
+    /** delay interval in ms */
+    A_UINT32 delay_interval;
+} wmi_sta_uapsd_auto_trig_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer mac address */
+    wmi_mac_addr peer_macaddr;
+    /** Number of AC to specify */
+    A_UINT32 num_ac;
+/*
+ * Following this struc is the TLV:
+ *     wmi_sta_uapsd_auto_trig_param ac_param[]; <-- Variable number of AC parameters (defined by field num_ac)
+ */
+
+} wmi_sta_uapsd_auto_trig_cmd_fixed_param;
+
+/** mimo powersave state */
+#define WMI_PEER_MIMO_PS_STATE                          0x1
+/** enable/disable AMPDU . initial value (enabled) */
+#define WMI_PEER_AMPDU                                  0x2
+/** authorize/unauthorize peer. initial value is unauthorized (0)  */
+#define WMI_PEER_AUTHORIZE                              0x3
+/** peer channel bandwidth */
+#define WMI_PEER_CHWIDTH                                0x4
+/** peer NSS */
+#define WMI_PEER_NSS                                    0x5
+/** USE 4 ADDR */
+#define WMI_PEER_USE_4ADDR                              0x6
+/* set group membership status */
+#define WMI_PEER_MEMBERSHIP             0x7
+#define WMI_PEER_USERPOS                0x8
+/*
+ * A critical high-level protocol is being used with this peer. Target
+ * should take appropriate measures (if possible) to ensure more
+ * reliable link with minimal latency. This *may* include modifying the
+ * station power save policy, enabling more RX chains, increased
+ * priority of channel scheduling, etc.
+ *
+ * NOTE: This parameter should only be considered a hint as specific
+ * behavior will depend on many factors including current network load
+ * and vdev/peer configuration.
+ *
+ * For STA VDEV this peer corresponds to the AP's BSS peer.
+ * For AP VDEV this peer corresponds to the remote peer STA.
+ */
+#define WMI_PEER_CRIT_PROTO_HINT_ENABLED     0x9
+/* set Tx failure count threshold for the peer - Currently unused */
+#define WMI_PEER_TX_FAIL_CNT_THR                        0xA
+/* Enable H/W retry and Enable H/W Send CTS2S before Data */
+#define WMI_PEER_SET_HW_RETRY_CTS2S                     0xB
+
+/* Set peer advertised IBSS atim window length */
+#define WMI_PEER_IBSS_ATIM_WINDOW_LENGTH                0xC
+
+/** peer phy mode */
+#define WMI_PEER_PHYMODE                                0xD
+/** Use FIXED Pwr */
+#define WMI_PEER_USE_FIXED_PWR                          0xE
+/** Set peer fixed rate */
+#define WMI_PEER_PARAM_FIXED_RATE                       0xF
+/** Whitelist peer TIDs */
+#define WMI_PEER_SET_MU_WHITELIST                       0x10
+/** Set peer max tx rate (MCS) in adaptive rate ctrl */
+#define WMI_PEER_SET_MAX_TX_RATE                        0x11
+/** Set peer minimal tx rate (MCS) in adaptive rate ctrl */
+#define WMI_PEER_SET_MIN_TX_RATE                        0x12
+/**
+ * default ring routing for peer data packets,
+ * param_value = bit 0 for hash based routing enabled or not
+ *               (value 1 is enabled, value 0 is disabled)
+ *               bits 1:5 are for ring 32 (i.e. ring id value
+ *               selected from 0 to 31 values)
+ */
+#define WMI_PEER_SET_DEFAULT_ROUTING                    0x13
+
+/** mimo ps values for the parameter WMI_PEER_MIMO_PS_STATE  */
+#define WMI_PEER_MIMO_PS_NONE                          0x0
+#define WMI_PEER_MIMO_PS_STATIC                        0x1
+#define WMI_PEER_MIMO_PS_DYNAMIC                       0x2
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_set_param_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** parameter id   */
+    A_UINT32 param_id;
+    /** parametr value */
+    A_UINT32 param_value;
+} wmi_peer_set_param_cmd_fixed_param;
+
+typedef union {
+    /*
+     * The A_UINT16 "mode" and "tx_rate" fields can only be directly used
+     * by the target or a little-endian host.
+     * A big-endian host needs to use the WMI_PEER_MAX_MIN_TX_xxx_GET/SET
+     * macros on the A_UINT32 "value" field.
+     */
+    struct {
+        A_UINT16 mode; /* 0:CCK, 1:OFDM, 2:HT, 3:VHT (see WMI_RATE_PREAMBLE) */
+        A_UINT16 tx_rate; /* see per-mode specs below */
+    };
+    A_UINT32 value; /* for use by big-endian host */
+} wmi_peer_max_min_tx_rate;
+
+/*
+ * Any access to the mode/tx_rate in an big endian system should use
+ * the below Macros on the wmi_peer_max_min_tx_rate.value field.
+ */
+#define WMI_PEER_MAX_MIN_TX_MODE_GET(value32) WMI_GET_BITS(value32, 0, 16)
+#define WMI_PEER_MAX_MIN_TX_MODE_SET(value32, tx_mode) WMI_SET_BITS(value32, 0, 16, tx_mode)
+
+#define WMI_PEER_MAX_MIN_TX_RATE_GET(value32) WMI_GET_BITS(value32, 16, 16)
+#define WMI_PEER_MAX_MIN_TX_RATE_SET(value32, tx_mode) WMI_SET_BITS(value32, 16, 16, tx_mode)
+
+/*   CCK max/min tx Rate description
+ *   tx_rate = 0:  1   Mbps
+ *   tx_rate = 1:  2   Mbps
+ *   tx_rate = 2:  5.5 Mbps
+ *   tx_rate = 3: 11   Mbps
+ *   tx_rate = else: invalid
+ */
+enum {
+    WMI_MAX_CCK_TX_RATE_1M,       /* up to 1M CCK Rate avaliable */
+    WMI_MAX_CCK_TX_RATE_2M,       /* up to 2M CCK Rate avaliable */
+    WMI_MAX_CCK_TX_RATE_5_5M,     /* up to 5.5M CCK Rate avaliable */
+    WMI_MAX_CCK_TX_RATE_11M,      /* up to 11M CCK Rate avaliable */
+    WMI_MAX_CCK_TX_RATE = WMI_MAX_CCK_TX_RATE_11M,
+};
+
+/*   OFDM max/min tx Rate description
+ *   tx_rate = 0:  6 Mbps
+ *   tx_rate = 1:  9 Mbps
+ *   tx_rate = 2: 12 Mbps
+ *   tx_rate = 3: 18 Mbps
+ *   tx_rate = 4: 24 Mbps
+ *   tx_rate = 5: 32 Mbps
+ *   tx_rate = 6: 48 Mbps
+ *   tx_rate = 7: 54 Mbps
+ *   tx_rate = else: invalid
+ */
+enum {
+    WMI_MAX_OFDM_TX_RATE_6M,      /* up to 6M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE_9M,      /* up to 9M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE_12M,     /* up to 12M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE_18M,     /* up to 18M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE_24M,     /* up to 24M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE_36M,     /* up to 36M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE_48M,     /* up to 48M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE_54M,     /* up to 54M OFDM Rate avaliable */
+    WMI_MAX_OFDM_TX_RATE = WMI_MAX_OFDM_TX_RATE_54M,
+};
+
+/*   HT max/min tx rate description
+ *    tx_rate = 0~7 : MCS Rate 0~7
+ *    tx_rate=else : invalid.
+ */
+#define WMI_MAX_HT_TX_MCS 0x07
+
+/*   VHT max/min tx rate description
+ *    tx_rate = 0~9 : MCS Rate 0~9
+ *    tx_rate=else : invalid.
+ */
+#define WMI_MAX_VHT_TX_MCS 0x09
+
+
+#define MAX_SUPPORTED_RATES 128
+
+typedef struct {
+    /** total number of rates */
+    A_UINT32 num_rates;
+    /**
+     * rates (each 8bit value) packed into a 32 bit word.
+     * the rates are filled from least significant byte to most
+     * significant byte.
+     */
+    A_UINT32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
+} wmi_rate_set;
+
+/* NOTE: It would bea good idea to represent the Tx MCS
+ * info in one word and Rx in another word. This is split
+ * into multiple words for convenience
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vht_rate_set */
+    A_UINT32 rx_max_rate; /* Max Rx data rate */
+    A_UINT32 rx_mcs_set; /* Negotiated RX VHT rates */
+    A_UINT32 tx_max_rate; /* Max Tx data rate */
+    A_UINT32 tx_mcs_set; /* Negotiated TX VHT rates */
+    A_UINT32 tx_max_mcs_nss;  /* b0-b3: max mcs idx; b4-b7: max nss */
+} wmi_vht_rate_set;
+
+/*
+ * IMPORTANT: Make sure the bit definitions here are consistent
+ * with the ni_flags definitions in wlan_peer.h
+ */
+#define WMI_PEER_AUTH           0x00000001  /* Authorized for data */
+#define WMI_PEER_QOS            0x00000002  /* QoS enabled */
+#define WMI_PEER_NEED_PTK_4_WAY 0x00000004  /* Needs PTK 4 way handshake for authorization */
+#define WMI_PEER_NEED_GTK_2_WAY 0x00000010  /* Needs GTK 2 way handshake after 4-way handshake */
+#define WMI_PEER_APSD           0x00000800  /* U-APSD power save enabled */
+#define WMI_PEER_HT             0x00001000  /* HT enabled */
+#define WMI_PEER_40MHZ          0x00002000  /* 40MHz enabld */
+#define WMI_PEER_STBC           0x00008000  /* STBC Enabled */
+#define WMI_PEER_LDPC           0x00010000  /* LDPC ENabled */
+#define WMI_PEER_DYN_MIMOPS     0x00020000  /* Dynamic MIMO PS Enabled */
+#define WMI_PEER_STATIC_MIMOPS  0x00040000  /* Static MIMO PS enabled */
+#define WMI_PEER_SPATIAL_MUX    0x00200000  /* SM Enabled */
+#define WMI_PEER_VHT            0x02000000  /* VHT Enabled */
+#define WMI_PEER_80MHZ          0x04000000  /* 80MHz enabld */
+#define WMI_PEER_PMF            0x08000000  /* Robust Management Frame Protection enabled */
+/** CAUTION TODO: Place holder for WLAN_PEER_F_PS_PRESEND_REQUIRED = 0x10000000. Need to be clean up */
+#define WMI_PEER_IS_P2P_CAPABLE 0x20000000  /* P2P capable peer */
+#define WMI_PEER_160MHZ         0x40000000  /* 160 MHz enabled */
+#define WMI_PEER_SAFEMODE_EN    0x80000000  /* Fips Mode Enabled */
+
+/**
+ * Peer rate capabilities.
+ *
+ * This is of interest to the ratecontrol
+ * module which resides in the firmware. The bit definitions are
+ * consistent with that defined in if_athrate.c.
+ *
+ * @todo
+ * Move this to a common header file later so there is no need to
+ * duplicate the definitions or maintain consistency.
+ */
+#define WMI_RC_DS_FLAG          0x01    /* Dual stream flag */
+#define WMI_RC_CW40_FLAG        0x02    /* CW 40 */
+#define WMI_RC_SGI_FLAG         0x04    /* Short Guard Interval */
+#define WMI_RC_HT_FLAG          0x08    /* HT */
+#define WMI_RC_RTSCTS_FLAG      0x10    /* RTS-CTS */
+#define WMI_RC_TX_STBC_FLAG     0x20    /* TX STBC */
+#define WMI_RC_RX_STBC_FLAG     0xC0    /* RX STBC ,2 bits */
+#define WMI_RC_RX_STBC_FLAG_S   6       /* RX STBC ,2 bits */
+#define WMI_RC_WEP_TKIP_FLAG    0x100   /* WEP/TKIP encryption */
+#define WMI_RC_TS_FLAG          0x200   /* Three stream flag */
+#define WMI_RC_UAPSD_FLAG       0x400   /* UAPSD Rate Control */
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_assoc_complete_cmd_fixed_param */
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** VDEV id */
+    A_UINT32 vdev_id;
+    /** assoc = 1 reassoc = 0 */
+    A_UINT32 peer_new_assoc;
+    /** peer associd (16 bits) */
+    A_UINT32 peer_associd;
+    /** peer station flags: see definition above */
+    A_UINT32 peer_flags;
+    /** negotiated capabilities (lower 16 bits)*/
+    A_UINT32 peer_caps;
+    /** Listen interval */
+    A_UINT32 peer_listen_intval;
+    /** HT capabilties of the peer */
+    A_UINT32 peer_ht_caps;
+    /** maximum rx A-MPDU length */
+    A_UINT32 peer_max_mpdu;
+    /** mpdu density of the peer in usec(0 to 16) */
+    A_UINT32 peer_mpdu_density;
+    /** peer rate capabilties see flags above */
+    A_UINT32 peer_rate_caps;
+    /** num spatial streams */
+    A_UINT32 peer_nss;
+    /** VHT capabilties of the peer */
+    A_UINT32 peer_vht_caps;
+    /** phy mode */
+    A_UINT32 peer_phymode;
+    /** HT Operation Element of the peer. Five bytes packed in 2
+     *  INT32 array and filled from lsb to msb.
+     *  Note that the size of array peer_ht_info[] cannotbe changed
+     *  without breaking WMI Compatibility. */
+    A_UINT32 peer_ht_info[2];
+    /** total number of negotiated legacy rate set. Also the sizeof
+     *  peer_legacy_rates[] */
+    A_UINT32 num_peer_legacy_rates;
+    /** total number of negotiated ht rate set. Also the sizeof
+     *  peer_ht_rates[] */
+    A_UINT32 num_peer_ht_rates;
+    /**
+     * Bitmap providing customized mapping of bandwidths to max Rx NSS
+     * for this peer.
+     * This is required since 802.11 standard currently facilitates peer to be
+     * able to advertise only a single max Rx NSS value across all bandwidths.
+     * Some QCA chipsets might need to be able to advertise a different max
+     * Rx NSS value for 160 MHz, than that for 80 MHz and lower.
+     *
+     *  bit[2:0] : Represents value of Rx NSS for VHT 160 MHz
+     *  bit[30:3]: Reserved
+     *  bit[31]  : MSB(0/1): 1 in case of valid data else all bits will be set
+     *             to 0 by host
+     */
+    A_UINT32 peer_bw_rxnss_override;
+
+    /* 802.11ax capabilities */
+    wmi_ppe_threshold peer_ppet;
+    A_UINT32 peer_he_cap_info; /* protocol-defined HE / 11ax capability flags */
+    A_UINT32 peer_he_ops; /* HE operation contains BSS color */
+
+/* Following this struc are the TLV's:
+ *     A_UINT8 peer_legacy_rates[];
+ *     A_UINT8 peer_ht_rates[];
+ *     wmi_vht_rate_set peer_vht_rates; <-- VHT capabilties of the peer
+ */
+} wmi_peer_assoc_complete_cmd_fixed_param;
+
+/* WDS Entry Flags */
+#define WMI_WDS_FLAG_STATIC    0x1    /* Disable aging & learning */
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_add_wds_entry_cmd_fixed_param */
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** wds MAC addr */
+    wmi_mac_addr wds_macaddr;
+    /* Flags associated with WDS entry - see WMI_WDS_FLAG defs */
+    A_UINT32 flags;
+    A_UINT32 vdev_id;
+} wmi_peer_add_wds_entry_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_remove_wds_entry_cmd_fixed_param */
+    /** wds MAC addr */
+    wmi_mac_addr wds_macaddr;
+    A_UINT32 vdev_id;
+} wmi_peer_remove_wds_entry_cmd_fixed_param;
+
+
+typedef struct {
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_peer_q_empty_callback_event;
+
+/*
+ * Command to update an already existing WDS entry. Different address setting
+ * combinations are possible.
+ *
+ * Valid wds and peer      -> Associated WDS entry peer ptr & flags will be updated.
+ * Valid wds and null peer -> Associated WDS entry flags will be updated.
+ * Null wds and Valid peer -> Flags will be updated for all WDS entries behind the peer.
+ * Null wds and peer       -> Flags will be updated for all WDS entries.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_update_wds_entry_cmd_fixed_param */
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** wds MAC addr */
+    wmi_mac_addr wds_macaddr;
+    /* Flags associated with WDS entry */
+    A_UINT32 flags;
+    A_UINT32 vdev_id;
+} wmi_peer_update_wds_entry_cmd_fixed_param;
+
+/**
+ * Channel info WMI event
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chan_info_event_fixed_param */
+    /** Error code */
+    A_UINT32 err_code;
+    /** Channel freq */
+    A_UINT32 freq;
+    /** Read flags */
+    A_UINT32 cmd_flags;
+    /** Noise Floor value */
+    A_UINT32 noise_floor;
+    /** rx clear count */
+    A_UINT32 rx_clear_count;
+    /** cycle count */
+    A_UINT32 cycle_count;
+    /** channel tx power per range in 0.5dBm steps */
+    A_UINT32 chan_tx_pwr_range;
+    /** channel tx power per throughput */
+    A_UINT32 chan_tx_pwr_tp;
+    /** rx frame count (cumulative) */
+    A_UINT32   rx_frame_count;
+    /** BSS rx cycle count */
+    A_UINT32 my_bss_rx_cycle_count;
+    /** b-mode data rx time (units are microseconds) */
+    A_UINT32 rx_11b_mode_data_duration;
+} wmi_chan_info_event_fixed_param;
+
+/**
+ * Non wlan interference event
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wlan_dcs_cw_int */
+    A_UINT32 channel; /* either number or freq in mhz*/
+} wlan_dcs_cw_int;
+#define ath_dcs_cw_int /* DEPRECATED */ wlan_dcs_cw_int /* alias */
+
+/**
+ *  wlan_dcs_im_tgt_stats
+ *
+ */
+typedef struct _wlan_dcs_im_tgt_stats {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wlan_dcs_im_tgt_stats_t */
+
+    /** current running TSF from the TSF-1 */
+    A_UINT32 reg_tsf32;
+
+    /** Known last frame rssi, in case of multiple stations, if
+     *  and at different ranges, this would not gaurantee that
+     *  this is the least rssi.
+     */
+    A_UINT32 last_ack_rssi;
+
+    /**  Sum of all the failed durations in the last one second interval.
+     */
+    A_UINT32 tx_waste_time;
+    /** count how many times the hal_rxerr_phy is marked, in this
+     *  time period
+     */
+    A_UINT32 rx_time;
+    A_UINT32 phyerr_cnt;
+
+    /**
+     *  WLAN IM stats from target to host
+     *
+     *  Below statistics are sent from target to host periodically.
+     *  These are collected at target as long as target is running
+     *  and target chip is not in sleep.
+     *
+     */
+
+    /** listen time from ANI */
+    A_INT32 listen_time;
+
+    /** tx frame count, MAC_PCU_TX_FRAME_CNT_ADDRESS */
+    A_UINT32 reg_tx_frame_cnt;
+
+    /** rx frame count, MAC_PCU_RX_FRAME_CNT_ADDRESS */
+    A_UINT32 reg_rx_frame_cnt;
+
+    /** rx clear count, MAC_PCU_RX_CLEAR_CNT_ADDRESS */
+    A_UINT32 reg_rxclr_cnt;
+
+    /** total cycle counts MAC_PCU_CYCLE_CNT_ADDRESS */
+    A_UINT32 reg_cycle_cnt; /* delta cycle count */
+
+    /** extenstion channel rx clear count  */
+    A_UINT32 reg_rxclr_ext_cnt;
+
+    /** OFDM phy error counts, MAC_PCU_PHY_ERR_CNT_1_ADDRESS */
+    A_UINT32 reg_ofdm_phyerr_cnt;
+
+    /** CCK phy error count, MAC_PCU_PHY_ERR_CNT_2_ADDRESS */
+    A_UINT32 reg_cck_phyerr_cnt; /* CCK err count since last reset, read from register */
+
+    /** Channel noise floor (units are dBm) */
+    A_INT32 chan_nf;
+
+    /** BSS rx cycle count */
+    A_UINT32 my_bss_rx_cycle_count;
+} wlan_dcs_im_tgt_stats_t;
+
+/**
+ *  wmi_dcs_interference_event_t
+ *
+ *  Right now this is event and stats together. Partly this is
+ *  because cw interference is handled in target now. This
+ *  can be done at host itself, if we can carry the NF alone
+ *  as a stats event. In future this would be done and this
+ *  event would carry only stats.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_dcs_interference_event_fixed_param */
+    /**
+     * Type of the event present, either the cw interference event, or the wlan_im stats
+     */
+    A_UINT32 interference_type; /* type of interference, wlan or cw */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+/*
+ * Following this struct are these TLVs. Note that they are both array of structures
+ * but can have at most one element. Which TLV is empty or has one element depends
+ * on the field interference_type. This is to emulate an union with cw_int and wlan_stat
+ * elements (not arrays).     union { wlan_dcs_cw_int cw_int; wlan_dcs_im_tgt_stats_t   wlan_stat; } int_event;
+ *
+ *       wlan_dcs_cw_int            cw_int[];   <-- cw_interference event
+ *       wlan_dcs_im_tgt_stats_t   wlan_stat[]; <-- wlan im interfernce stats
+ */
+} wmi_dcs_interference_event_fixed_param;
+
+enum wmi_peer_mcast_group_action {
+    wmi_peer_mcast_group_action_add = 0,
+    wmi_peer_mcast_group_action_del = 1
+};
+#define WMI_PEER_MCAST_GROUP_FLAG_ACTION_M   0x1
+#define WMI_PEER_MCAST_GROUP_FLAG_ACTION_S   0
+#define WMI_PEER_MCAST_GROUP_FLAG_WILDCARD_M 0x2
+#define WMI_PEER_MCAST_GROUP_FLAG_WILDCARD_S 1
+#define WMI_PEER_MCAST_GROUP_FLAG_SRC_FILTER_EXCLUDE_M 0x4 /* flag to exclude an ip while filtering. set to exclude */
+#define WMI_PEER_MCAST_GROUP_FLAG_SRC_FILTER_EXCLUDE_S 2
+#define WMI_PEER_MCAST_GROUP_FLAG_IPV6_M 0x8 /* flag to say ipv4/ipv6. Will be set for ipv6 */
+#define WMI_PEER_MCAST_GROUP_FLAG_IPV6_S 3
+#define WMI_PEER_MCAST_GROUP_FLAG_DELETEALL_M 0x10 /* delete all mcast table entries. */
+#define WMI_PEER_MCAST_GROUP_FLAG_DELETEALL_S 4
+
+/* multicast group membership commands */
+/* TODO: Converting this will be tricky since it uses an union.
+ Also, the mac_addr is not aligned. We will convert to the wmi_mac_addr */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_mcast_group_cmd_fixed_param */
+    A_UINT32 flags;
+    wmi_mac_addr ucast_mac_addr;
+    /* in network byte order */
+    /* for ipv4, bytes (12-15) should contain ip address and other lower bytes 0. ipv6 should have all bytes valid */
+    A_UINT8 mcast_ip_addr[16];
+    /* for ipv6, all 16 bytes has to be valid; for ipv4 last 4 bytes(12-15) has to be valid, rest all 0s */
+    A_UINT8 mcast_ip_mask[16];/* zero out lower bytes if ipv4*/
+    /* number of address filters - irrespective of ipv4/ipv6 addresses */
+    A_UINT32 num_filter_addr;
+    /* this array should contain the src IPs that are to be filtered during find
+       The array should be packed.
+       If there are 2 ipv4 addresses, there should be 8 bytes and rest all 0s */
+    A_UINT8 filter_addr[64]; /* 16 ipv4 addresses or 4 ipv6 addresses */
+    A_UINT8  vdev_id; /* vdev of this mcast group */
+} wmi_peer_mcast_group_cmd_fixed_param;
+
+
+/** Offload Scan and Roaming related  commands */
+/** The FW performs 2 different kinds of offload scans independent
+ *  of host. One is Roam scan which is primarily performed  on a
+ *  station VDEV after association to look for a better AP that
+ *  the station VDEV can roam to. The second scan is connect scan
+ *  which is mainly performed when the station is not associated
+ *  and to look for a matching AP profile from a list of
+ *  configured profiles. */
+
+/**
+ * WMI_ROAM_SCAN_MODE: Set Roam Scan mode
+ *   the roam scan mode is one of the periodic, rssi change, both, none.
+ *   None        : Disable Roam scan. No Roam scan at all.
+ *   Periodic    : Scan periodically with a configurable period.
+ *   Rssi change : Scan when ever rssi to current AP changes by the threshold value
+ *                 set by WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD command.
+ *   Both        : Both of the above (scan when either period expires or rss to current AP changes by X amount)
+ *
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_mode_fixed_param */
+    A_UINT32 roam_scan_mode;
+    A_UINT32 vdev_id;
+} wmi_roam_scan_mode_fixed_param;
+
+#define WMI_ROAM_SCAN_MODE_NONE        0x0
+#define WMI_ROAM_SCAN_MODE_PERIODIC    0x1
+#define WMI_ROAM_SCAN_MODE_RSSI_CHANGE 0x2
+#define WMI_ROAM_SCAN_MODE_BOTH        0x3
+/* Note: WMI_ROAM_SCAN_MODE_ROAMOFFLOAD is one bit not conflict with LFR2.0 SCAN_MODE. */
+#define WMI_ROAM_SCAN_MODE_ROAMOFFLOAD 0x4
+
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 command_arg;
+} wmi_roam_scan_cmd_fixed_param;
+
+#define WMI_ROAM_SCAN_STOP_CMD 0x1
+
+/**
+ * WMI_ROAM_SCAN_RSSI_THRESHOLD : set scan rssi thresold
+ *  scan rssi threshold is the rssi threshold below which the FW will start running Roam scans.
+ * Applicable when WMI_ROAM_SCAN_MODE is not set to none.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_rssi_threshold_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** roam scan rssi threshold */
+    A_UINT32 roam_scan_rssi_thresh;
+    /** When using Hw generated beacon RSSI interrupts */
+    A_UINT32 roam_rssi_thresh_diff;
+    /** 5G scan max count */
+    A_UINT32 hirssi_scan_max_count;
+    /** 5G scan rssi change threshold value */
+    A_UINT32 hirssi_scan_delta;
+    /** 5G scan upper bound */
+    A_UINT32 hirssi_upper_bound;
+    /* The TLVs will follow.
+     * wmi_roam_scan_extended_threshold_param extended_param;
+     * wmi_roam_earlystop_rssi_thres_param earlystop_param;
+     * wmi_roam_dense_thres_param dense_param;
+     */
+} wmi_roam_scan_rssi_threshold_fixed_param;
+
+#define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_FIXED  0x0
+#define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_LINEAR 0x1
+#define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_LOG    0x2
+#define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_EXP    0x3
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_extended_threshold_param */
+    A_UINT32 boost_threshold_5g; /** RSSI threshold above which 5GHz RSSI is favored */
+    A_UINT32 penalty_threshold_5g; /** RSSI threshold below which 5GHz RSSI is penalized */
+    A_UINT32 boost_algorithm_5g; /** 0 == fixed, 1 == linear, 2 == logarithm ..etc */
+    A_UINT32 boost_factor_5g; /** factor by which 5GHz RSSI is boosted */
+    A_UINT32 penalty_algorithm_5g; /** 0 == fixed, 1 == linear, 2 == logarithm ..etc */
+    A_UINT32 penalty_factor_5g; /** factor by which 5GHz RSSI is penalized */
+    A_UINT32 max_boost_5g; /** maximum boost that can be applied to a 5GHz RSSI */
+    A_UINT32 max_penalty_5g; /** maximum penality that can be applied to a 5GHz RSSI */
+    A_UINT32 good_rssi_threshold; /**  RSSI below which roam is kicked in by background scan, although rssi is still good */
+} wmi_roam_scan_extended_threshold_param;
+
+/**
+ * WMI_ROAM_SCAN_PERIOD: period for roam scan.
+ *  Applicable when the scan mode is Periodic or both.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_period_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** roam scan period value */
+    A_UINT32 roam_scan_period;
+    /** Aging for Roam scans */
+    A_UINT32 roam_scan_age;
+} wmi_roam_scan_period_fixed_param;
+
+/**
+ * WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD : rssi delta to trigger the roam scan.
+ *   Rssi change threshold used when mode is Rssi change (or) Both.
+ *   The FW will run the roam scan when ever the rssi changes (up or down) by the value set by this parameter.
+ *   Note scan is triggered based on the rssi threshold condition set by WMI_ROAM_SCAN_RSSI_THRESHOLD
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_rssi_change_threshold_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** roam scan rssi change threshold value */
+    A_UINT32 roam_scan_rssi_change_thresh;
+    /** When using Hw generated beacon RSSI interrupts */
+    A_UINT32 bcn_rssi_weight;
+    /** Minimum delay between two 5G scans */
+    A_UINT32 hirssi_delay_btw_scans;
+} wmi_roam_scan_rssi_change_threshold_fixed_param;
+
+#define WMI_ROAM_SCAN_CHAN_LIST_TYPE_NONE 0x1
+#define WMI_ROAM_SCAN_CHAN_LIST_TYPE_STATIC 0x2
+#define WMI_ROAM_SCAN_CHAN_LIST_TYPE_DYNAMIC 0x3
+/**
+ * TLV for roaming channel list
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_chan_list_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** WMI_CHAN_LIST_TAG */
+    A_UINT32 chan_list_type;
+    /** # if channels to scan */
+    A_UINT32 num_chan;
+/**
+ * TLV (tag length value) parameters follow the wmi_roam_chan_list
+ * structure. The TLV's are:
+ *     A_UINT32 channel_list[];
+ **/
+} wmi_roam_chan_list_fixed_param;
+
+/** Authentication modes */
+enum {
+    WMI_AUTH_NONE, /* no upper level auth */
+    WMI_AUTH_OPEN, /* open */
+    WMI_AUTH_SHARED, /* shared-key */
+    WMI_AUTH_8021X, /* 802.1x */
+    WMI_AUTH_AUTO, /* Auto */
+    WMI_AUTH_WPA, /* WPA */
+    WMI_AUTH_RSNA, /* WPA2/RSNA */
+    WMI_AUTH_CCKM, /* CCKM */
+    WMI_AUTH_WAPI, /* WAPI */
+    WMI_AUTH_AUTO_PSK,
+    WMI_AUTH_WPA_PSK,
+    WMI_AUTH_RSNA_PSK,
+    WMI_AUTH_WAPI_PSK,
+    WMI_AUTH_FT_RSNA, /* 11r FT */
+    WMI_AUTH_FT_RSNA_PSK,
+    WMI_AUTH_RSNA_PSK_SHA256,
+    WMI_AUTH_RSNA_8021X_SHA256,
+    WMI_AUTH_CCKM_WPA,
+    WMI_AUTH_CCKM_RSNA,
+};
+
+typedef struct {
+    /** authentication mode (defined above)  */
+    A_UINT32 rsn_authmode;
+    /** unicast cipher set */
+    A_UINT32 rsn_ucastcipherset;
+    /** mcast/group cipher set */
+    A_UINT32 rsn_mcastcipherset;
+    /** mcast/group management frames cipher set */
+    A_UINT32 rsn_mcastmgmtcipherset;
+} wmi_rsn_params;
+
+/** looking for a wps enabled AP */
+#define WMI_AP_PROFILE_FLAG_WPS    0x1
+/** looking for a secure AP  */
+#define WMI_AP_PROFILE_FLAG_CRYPTO 0x2
+/** looking for a PMF enabled AP */
+#define WMI_AP_PROFILE_FLAG_PMF    0x4
+
+
+/** To match an open AP, the rs_authmode should be set to WMI_AUTH_NONE
+ *  and WMI_AP_PROFILE_FLAG_CRYPTO should be clear.
+ *  To match a WEP enabled AP, the rs_authmode should be set to WMI_AUTH_NONE
+ *  and WMI_AP_PROFILE_FLAG_CRYPTO should be set .
+ */
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ap_profile */
+    /** flags as defined above */
+    A_UINT32 flags;
+    /**
+     * rssi thresold value: the value of the the candidate AP should
+     * higher by this threshold than the rssi of the currrently associated AP.
+     */
+    A_UINT32 rssi_threshold;
+    /**
+     * ssid vlaue to be matched.
+     */
+    wmi_ssid ssid;
+
+    /**
+     * security params to be matched.
+     */
+    /** authentication mode (defined above)  */
+    A_UINT32 rsn_authmode;
+    /** unicast cipher set */
+    A_UINT32 rsn_ucastcipherset;
+    /** mcast/group cipher set */
+    A_UINT32 rsn_mcastcipherset;
+    /** mcast/group management frames cipher set */
+    A_UINT32 rsn_mcastmgmtcipherset;
+} wmi_ap_profile;
+
+/** Support early stop roaming scanning when finding a strong candidate AP
+ * A 'strong' candidate is
+ * 1) Is eligible candidate
+ *    (all conditions are met in existing candidate selection).
+ * 2) Its rssi is better than earlystop threshold.
+ *    Earlystop threshold will be relaxed as each channel is scanned.
+ */
+typedef struct {
+    A_UINT32 tlv_header;
+    /* Minimum RSSI threshold value for early stop, unit is dB above NF. */
+    A_UINT32 roam_earlystop_thres_min;
+    /* Maminum RSSI threshold value for early stop, unit is dB above NF. */
+    A_UINT32 roam_earlystop_thres_max;
+} wmi_roam_earlystop_rssi_thres_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_dense_thres_param */
+    A_UINT32 tlv_header;
+    /** rssi threshold offset under trffic and dense env */
+    A_UINT32 roam_dense_rssi_thres_offset;
+    /** minimum number of APs to determine dense env */
+    A_UINT32 roam_dense_min_aps;
+    /** initial dense status detected by host at the time of initial connection */
+    A_UINT32 roam_dense_status;
+    /* traffic threshold to enable aggressive roaming in dense env; units are percent of medium occupancy, 0 - 100 */
+    A_UINT32 roam_dense_traffic_thres;
+} wmi_roam_dense_thres_param;
+
+/** Beacon filter wmi command info */
+
+#define BCN_FLT_MAX_SUPPORTED_IES    256
+#define BCN_FLT_MAX_ELEMS_IE_LIST    (BCN_FLT_MAX_SUPPORTED_IES/32)
+
+typedef struct bss_bcn_stats {
+    A_UINT32 vdev_id;
+    A_UINT32 bss_bcnsdropped;
+    A_UINT32 bss_bcnsdelivered;
+} wmi_bss_bcn_stats_t;
+
+typedef struct bcn_filter_stats {
+    A_UINT32 bcns_dropped;
+    A_UINT32 bcns_delivered;
+    A_UINT32 activefilters;
+    wmi_bss_bcn_stats_t bss_stats;
+} wmi_bcnfilter_stats_t;
+
+typedef struct wmi_add_bcn_filter_cmd {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_add_bcn_filter_cmd_fixed_param */
+    A_UINT32 vdev_id;
+/*
+ * Following this structure is the TLV:
+ *    A_UINT32   ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
+ */
+} wmi_add_bcn_filter_cmd_fixed_param;
+
+typedef struct wmi_rmv_bcn_filter_cmd {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rmv_bcn_filter_cmd_fixed_param */
+    A_UINT32 vdev_id;
+} wmi_rmv_bcn_filter_cmd_fixed_param;
+
+#define WMI_BCN_SEND_DTIM_ZERO         1
+#define WMI_BCN_SEND_DTIM_BITCTL_SET   2
+typedef struct wmi_bcn_send_from_host {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_send_from_host_cmd_fixed_param  */
+    A_UINT32 vdev_id;
+    A_UINT32 data_len;
+    union {
+        A_UINT32 frag_ptr; /* Physical address of the frame */
+        A_UINT32 frag_ptr_lo; /* LSBs of physical address of the frame */
+    };
+    A_UINT32 frame_ctrl; /* farme ctrl to setup PPDU desc */
+    A_UINT32 dtim_flag; /* to control CABQ traffic */
+    A_UINT32 bcn_antenna;   /* Antenna for beacon transmission */
+    A_UINT32 frag_ptr_hi; /* MSBs of physical address of the frame */
+} wmi_bcn_send_from_host_cmd_fixed_param;
+
+/* cmd to support bcn snd for all vaps at once */
+typedef struct wmi_pdev_send_bcn {
+    A_UINT32 num_vdevs;
+    wmi_bcn_send_from_host_cmd_fixed_param bcn_cmd[1];
+} wmi_pdev_send_bcn_cmd_t;
+
+/*
+ * WMI_ROAM_AP_PROFILE:  AP profile of connected AP for roaming.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_ap_profile_fixed_param */
+    /** id of AP criteria */
+    A_UINT32 id;
+
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+
+/*
+ * Following this structure is the TLV:
+ *     wmi_ap_profile ap_profile; <-- AP profile info
+ */
+} wmi_roam_ap_profile_fixed_param;
+
+/**
+ * WMI_OFL_SCAN_ADD_AP_PROFILE: add an AP profile.
+ */
+typedef struct {
+    /** id of AP criteria */
+    A_UINT32 id;
+
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+
+    /** AP profile info */
+    wmi_ap_profile ap_profile;
+
+} wmi_ofl_scan_add_ap_profile;
+
+/**
+ * WMI_OFL_SCAN_REMOVE_AP_CRITERIA: remove an ap profile.
+ */
+typedef struct {
+    /** id of AP criteria */
+    A_UINT32 id;
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_ofl_scan_remove_ap_profile;
+
+/**
+ * WMI_OFL_SCAN_PERIOD: period in msec for offload scan.
+ *  0 will disable ofload scan and a very low value will perform a continous
+ *  scan.
+ */
+typedef struct {
+    /** offload scan period value, used for scans used when not connected */
+    A_UINT32 ofl_scan_period;
+} wmi_ofl_scan_period;
+
+/* Do not modify XXX_BYTES or XXX_LEN below as it is fixed by standard */
+#define ROAM_OFFLOAD_PMK_BYTES       (32)
+#define ROAM_OFFLOAD_PSK_MSK_BYTES   (32)
+#define ROAM_OFFLOAD_KRK_BYTES       (16)
+#define ROAM_OFFLOAD_BTK_BYTES       (32)
+#define ROAM_OFFLOAD_R0KH_ID_MAX_LEN (48)
+#define ROAM_OFFLOAD_NUM_MCS_SET     (16)
+
+/* This TLV will be filled only in case roam offload for wpa2-psk/okc/ese/11r is enabled */
+typedef struct {
+    A_UINT32 tlv_header;     /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_offload_fixed_param */
+    A_UINT32 rssi_cat_gap;   /* gap for every category bucket */
+    A_UINT32 prefer_5g;      /* prefer select 5G candidate */
+    A_UINT32 select_5g_margin;
+    A_UINT32 reassoc_failure_timeout;     /* reassoc failure timeout */
+    A_UINT32 capability;
+    A_UINT32 ht_caps_info;
+    A_UINT32 ampdu_param;
+    A_UINT32 ht_ext_cap;
+    A_UINT32 ht_txbf;
+    A_UINT32 asel_cap;
+    A_UINT32 qos_enabled;
+    A_UINT32 qos_caps;
+    A_UINT32 wmm_caps;
+    A_UINT32 mcsset[ROAM_OFFLOAD_NUM_MCS_SET>>2]; /* since this 4 byte aligned, we don't declare it as tlv array */
+} wmi_roam_offload_tlv_param;
+
+
+/* flags for 11i offload */
+#define WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED       0   /* okc is enabled */
+/* from bit 1 to bit 31 are reserved */
+
+#define WMI_SET_ROAM_OFFLOAD_OKC_ENABLED(flag) do { \
+        (flag) |=  (1 << WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED);      \
+     } while (0)
+
+#define WMI_SET_ROAM_OFFLOAD_OKC_DISABLED(flag) do { \
+        (flag) &=  ~(1 << WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED);      \
+     } while (0)
+
+#define WMI_GET_ROAM_OFFLOAD_OKC_ENABLED(flag)   \
+        ((flag) & (1 << WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED))
+
+/* This TLV will be  filled only in case of wpa-psk/wpa2-psk */
+typedef struct {
+    A_UINT32 tlv_header;     /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_11i_offload_fixed_param */
+    A_UINT32 flags;          /** flags. see WMI_ROAM_OFFLOAD_FLAG_ above */
+    A_UINT32 pmk[ROAM_OFFLOAD_PMK_BYTES>>2]; /* pmk offload. As this 4 byte aligned, we don't declare it as tlv array */
+    A_UINT32 pmk_len; /**the length of pmk. in normal case it should be 32, but for LEAP, is should be 16*/
+} wmi_roam_11i_offload_tlv_param;
+
+/* This TLV will be  filled only in case of 11R*/
+typedef struct {
+    A_UINT32 tlv_header;     /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_11r_offload_fixed_param */
+    A_UINT32 mdie_present;
+    A_UINT32 mdid;
+    A_UINT32 r0kh_id[ROAM_OFFLOAD_R0KH_ID_MAX_LEN>>2];
+    A_UINT32 r0kh_id_len;
+    A_UINT32 psk_msk[ROAM_OFFLOAD_PSK_MSK_BYTES>>2]; /* psk/msk offload. As this 4 byte aligned, we don't declare it as tlv array */
+    A_UINT32 psk_msk_len; /**length of psk_msk*/
+} wmi_roam_11r_offload_tlv_param;
+
+/* This TLV will be filled only in case of ESE */
+typedef struct {
+    A_UINT32 tlv_header;     /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_ese_offload_fixed_param */
+    A_UINT32 krk[ROAM_OFFLOAD_KRK_BYTES>>2]; /* KRK offload. As this 4 byte aligned, we don't declare it as tlv array */
+    A_UINT32 btk[ROAM_OFFLOAD_BTK_BYTES>>2]; /* BTK offload. As this 4 byte aligned, we don't declare it as tlv array */
+} wmi_roam_ese_offload_tlv_param;
+
+/** WMI_ROAM_EVENT: roam event triggering the host roam logic.
+ * generated when ever a better AP is found in the recent roam scan (or)
+ * when beacon miss is detected (or) when a DEAUTH/DISASSOC is received
+ * from the current AP.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_event_fixed_param  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** reason for roam event */
+    A_UINT32 reason;
+    /** associated AP's rssi calculated by FW when reason code is WMI_ROAM_REASON_LOW_RSSI*/
+    A_UINT32 rssi;
+    /** roam notification */
+    A_UINT32 notif;
+} wmi_roam_event_fixed_param;
+
+
+/* roam_reason: bits 0-3 */
+#define WMI_ROAM_REASON_INVALID   0x0 /** invalid reason. Do not interpret reason field */
+#define WMI_ROAM_REASON_BETTER_AP 0x1 /** found a better AP */
+#define WMI_ROAM_REASON_BMISS     0x2 /** beacon miss detected */
+#define WMI_ROAM_REASON_DEAUTH    0x2 /** deauth/disassoc received */
+#define WMI_ROAM_REASON_LOW_RSSI  0x3 /** connected AP's low rssi condition detected */
+#define WMI_ROAM_REASON_SUITABLE_AP 0x4 /** found another AP that matches
+                                          SSID and Security profile in
+                                          WMI_ROAM_AP_PROFILE, found during scan
+                                          triggered upon FINAL_BMISS **/
+#define WMI_ROAM_REASON_HO_FAILED  0x5  /** LFR3.0 roaming failed, indicate the disconnection to host */
+/** WMI_ROAM_REASON_INVOKE_ROAM_FAIL:
+ * Result code of WMI_ROAM_INVOKE_CMDID.
+ * Any roaming failure before reassociation will be indicated to host
+ * with this reason.
+ * Any roaming failure after reassociation will be indicated to host with
+ * WMI_ROAM_REASON_HO_FAILED no matter WMI_ROAM_INVOKE_CMDID is called or not.
+ */
+#define WMI_ROAM_REASON_INVOKE_ROAM_FAIL 0x6
+/* reserved up through 0xF */
+
+/* subnet status: bits 4-5 */
+typedef enum
+{
+    WMI_ROAM_SUBNET_CHANGE_STATUS_UNKNOWN = 0,
+    WMI_ROAM_SUBNET_CHANGE_STATUS_UNCHANGED,
+    WMI_ROAM_SUBNET_CHANGE_STATUS_CHANGED,
+} wmi_roam_subnet_change_status;
+
+#define WMI_ROAM_SUBNET_CHANGE_STATUS_MASK      0x30
+#define WMI_ROAM_SUBNET_CHANGE_STATUS_SHIFT     4
+
+#define WMI_SET_ROAM_SUBNET_CHANGE_STATUS(roam_reason, status) \
+    do { \
+        (roam_reason) |= \
+            (((status) << WMI_ROAM_SUBNET_CHANGE_STATUS_SHIFT) & \
+             WMI_ROAM_SUBNET_CHANGE_STATUS_MASK); \
+    } while (0)
+
+#define WMI_GET_ROAM_SUBNET_CHANGE_STATUS(roam_reason) \
+    (((roam_reason) & WMI_ROAM_SUBNET_CHANGE_STATUS_MASK) >> \
+     WMI_ROAM_SUBNET_CHANGE_STATUS_SHIFT)
+
+/* roaming notification */
+#define WMI_ROAM_NOTIF_INVALID     0x0  /** invalid notification. Do not interpret notif field  */
+#define WMI_ROAM_NOTIF_ROAM_START  0x1  /** indicate that roaming is started. sent only in non WOW state */
+#define WMI_ROAM_NOTIF_ROAM_ABORT  0x2  /** indicate that roaming is aborted. sent only in non WOW state */
+
+/**whenever RIC request information change, host driver should pass all ric related information to firmware (now only support tsepc)
+* Once, 11r roaming happens, firmware can generate RIC request in reassoc request based on these informations
+*/
+typedef struct
+{
+    A_UINT32 tlv_header;      /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ric_request_fixed_param */
+	A_UINT32 vdev_id;         /**unique id identifying the VDEV, generated by the caller*/
+    A_UINT32 num_ric_request; /**number of ric request ie send to firmware.(max value is 2 now)*/
+    A_UINT32 is_add_ric;      /**support add ric or delete ric*/
+} wmi_ric_request_fixed_param;
+
+/**tspec element: refer to 8.4.2.32 of 802.11 2012 spec
+* these elements are used to construct tspec field in RIC request, which allow station to require specific TS when 11r roaming
+*/
+typedef struct{
+    A_UINT32                         tlv_header;
+    A_UINT32                         ts_info; /** bits value of TS Info field.*/
+    A_UINT32                         nominal_msdu_size; /**Nominal MSDU Size field*/
+    A_UINT32                         maximum_msdu_size; /**The Maximum MSDU Size field*/
+    A_UINT32                         min_service_interval; /**The Minimum Service Interval field*/
+    A_UINT32                         max_service_interval; /**The Maximum Service Interval field*/
+    A_UINT32                         inactivity_interval; /**The Inactivity Interval field*/
+    A_UINT32                         suspension_interval; /**The Suspension Interval field*/
+    A_UINT32                         svc_start_time; /**The Service Start Time field*/
+    A_UINT32                         min_data_rate; /**The Minimum Data Rate field*/
+    A_UINT32                         mean_data_rate; /**The Mean Data Rate field*/
+    A_UINT32                         peak_data_rate; /**The Peak Data Rate field*/
+    A_UINT32                         max_burst_size; /**The Burst Size field*/
+    A_UINT32                         delay_bound; /**The Delay Bound field*/
+    A_UINT32                         min_phy_rate; /**The Minimum PHY Rate field*/
+    A_UINT32                         surplus_bw_allowance; /**The Surplus Bandwidth Allowance field*/
+    A_UINT32                         medium_time; /**The Medium Time field,in units of 32 us/s.*/
+} wmi_ric_tspec;
+
+/* flags for roam_invoke_cmd */
+/* add this channel into roam cache channel list after this command is finished */
+#define WMI_ROAM_INVOKE_FLAG_ADD_CH_TO_CACHE       0
+/* indicate to host of failure if WMI_ROAM_INVOKE_CMDID. */
+#define WMI_ROAM_INVOKE_FLAG_REPORT_FAILURE        1
+/* during host-invoked roaming, don't send null data frame to AP */
+#define WMI_ROAM_INVOKE_FLAG_NO_NULL_FRAME_TO_AP   2
+/* from bit 3 to bit 31 are reserved */
+
+#define WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE(flag) do { \
+        (flag) |=  (1 << WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE);      \
+     } while (0)
+
+#define WMI_CLEAR_ROAM_INVOKE_ADD_CH_TO_CACHE(flag) do { \
+        (flag) &=  ~(1 << WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE);      \
+     } while (0)
+
+#define WMI_GET_ROAM_INVOKE_ADD_CH_TO_CACHE(flag)   \
+        ((flag) & (1 << WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE))
+
+
+#define WMI_ROAM_INVOKE_SCAN_MODE_FIXED_CH      0   /* scan given channel only */
+#define WMI_ROAM_INVOKE_SCAN_MODE_CACHE_LIST    1   /* scan cached channel list */
+#define WMI_ROAM_INVOKE_SCAN_MODE_FULL_CH       2   /* scan full channel */
+
+#define WMI_ROAM_INVOKE_AP_SEL_FIXED_BSSID      0   /* roam to given BSSID only */
+#define WMI_ROAM_INVOKE_AP_SEL_ANY_BSSID        1   /* roam to any BSSID */
+
+/** WMI_ROAM_INVOKE_CMD: command to invoke roaming forcefully
+*
+if <roam_scan_ch_mode> is zero and <channel_no> is not given, roaming is not executed.
+if <roam_ap_sel_mode> is zero and <BSSID) is not given, roaming is not executed
+
+This command can be used to add specific channel into roam cached channel list by following
+<roam_scan_ch_mode> = 0
+<roam_ap_sel_mode> = 0
+<roam_delay> = 0
+<flag> |= WMI_ROAM_INVOKE_FLAG_ADD_CH_TO_CACHE
+<BSSID> = do not fill (there will be no actual roaming because of ap_sel_mode is zero, but no BSSID is given)
+<channel_no> = channel list to be added
+*/
+typedef struct {
+    A_UINT32 tlv_header;     /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_invoke_fixed_param */
+    A_UINT32 vdev_id; /** Unique id identifying the VDEV on which roaming is invoked */
+    A_UINT32 flags;   /** flags. see WMI_ROAM_INVOKE_FLAG_ above */
+    A_UINT32 roam_scan_mode; /** see WMI_ROAM_INVOKE_SCAN_ above */
+    A_UINT32 roam_ap_sel_mode; /** see WMI_ROAM_INVOKE_AP_SEL_ above */
+    A_UINT32 roam_delay; /** 0 = immediate roam, 1-2^32 = roam after this delay (msec) */
+    A_UINT32 num_chan; /** # if channels to scan. In the TLV channel_list[] */
+    A_UINT32 num_bssid;  /** number of bssids. In the TLV bssid_list[] */
+    /**
+     * TLV (tag length value) parameters follows roam_invoke_req
+     * The TLV's are:
+     *     A_UINT32 channel_list[];
+     *     wmi_mac_addr bssid_list[];
+     */
+} wmi_roam_invoke_cmd_fixed_param;
+
+/* Definition for op_bitmap */
+enum {
+    ROAM_FILTER_OP_BITMAP_BLACK_LIST =   0x1,
+    ROAM_FILTER_OP_BITMAP_WHITE_LIST =   0x2,
+    ROAM_FILTER_OP_BITMAP_PREFER_BSSID = 0x4,
+};
+
+typedef struct {
+    A_UINT32 tlv_header;     /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_filter_list_fixed_param */
+    A_UINT32 vdev_id; /** Unique id identifying the VDEV on which roaming filter is adopted */
+    A_UINT32 flags; /** flags for filter */
+    A_UINT32 op_bitmap; /** 32 bit bitmap to be set on. bit0 = first param, bit 1 = second param...etc. Can be or'ed */
+    A_UINT32 num_bssid_black_list; /* number of blacklist in the TLV variable bssid_black_list */
+    A_UINT32 num_ssid_white_list; /* number of whitelist in the TLV variable ssid_white_list */
+    A_UINT32 num_bssid_preferred_list; /* only for lfr 3.0. number of preferred list & factor in the TLV */
+    /**
+     * TLV (tag length value) parameters follows roam_filter_list_cmd
+     * The TLV's are:
+     *     wmi_mac_addr bssid_black_list[];
+     *     wmi_ssid ssid_white_list[];
+     *     wmi_mac_addr bssid_preferred_list[];
+     *     A_UINT32 bssid_preferred_factor[];
+     */
+} wmi_roam_filter_fixed_param;
+
+typedef struct {
+    A_UINT8 address[4]; /* IPV4 address in Network Byte Order */
+} WMI_IPV4_ADDR;
+
+typedef struct _WMI_IPV6_ADDR {
+    A_UINT8 address[16]; /* IPV6 in Network Byte Order */
+} WMI_IPV6_ADDR;
+
+/* flags for subnet change detection */
+#define WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED 0
+#define WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED 1
+/* bit 2 to bit 31 are reserved */
+
+/* set IPv4 enabled/disabled flag and get the flag */
+#define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED(flag) do { \
+    (flag) |= (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED); \
+} while (0)
+
+#define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP4_DISABLED(flag) do { \
+    (flag) &= ~(1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED); \
+} while (0)
+
+#define WMI_GET_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED(flag) \
+    ((flag) & (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED))
+
+/* set IPv6 enabled flag, disabled and get the flag */
+#define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED(flag) do { \
+    (flag) |= (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED); \
+} while (0)
+
+#define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP6_DISABLED(flag) do { \
+    (flag) &= ~(1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED); \
+} while (0)
+
+#define WMI_GET_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED(flag) \
+    ((flag) & (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED))
+
+/**
+ * WMI_ROAM_SUBNET_CHANGE_CONFIG : Pass the gateway IP and MAC addresses
+ *  to FW. FW uses these parameters for subnet change detection.
+ */
+typedef struct {
+    A_UINT32      tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_subnet_change_config_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32      vdev_id;
+    /** IPv4/IPv6 enabled/disabled */
+    /** This flag sets the WMI_SET_ROAM_SUBNET_CHANGE_FLAG_xxx_ENABLED/DISABLED */
+    A_UINT32      flag;
+    /** Gateway MAC address */
+    wmi_mac_addr  inet_gw_mac_addr;
+    /** IP addresses */
+    WMI_IPV4_ADDR inet_gw_ip_v4_addr;
+    WMI_IPV6_ADDR inet_gw_ip_v6_addr;
+    /** Number of software retries for ARP/Neighbor solicitation request */
+    A_UINT32      max_retries;
+    /** timeout in milliseconds for each ARP request*/
+    A_UINT32      timeout;
+    /** number of skipped aps **/
+    A_UINT32      num_skip_subnet_change_detection_bssid_list;
+/**
+ * TLV (tag length value) parameters follows roam_subnet_change_config_cmd
+ * structure. The TLV's are:
+ *     wmi_mac_addr skip_subnet_change_detection_bssid_list [];
+ **/
+} wmi_roam_subnet_change_config_fixed_param;
+
+/** WMI_PROFILE_MATCH_EVENT: offload scan
+ * generated when ever atleast one of the matching profiles is found
+ * in recent NLO scan. no data is carried with the event.
+ */
+
+/** P2P specific commands */
+
+/**
+ * WMI_P2P_DEV_SET_DEVICE_INFO : p2p device info, which will be used by
+ * FW to generate P2P IE tobe carried in probe response frames.
+ * FW will respond to probe requests while in listen state.
+ */
+typedef struct {
+    /* number of secondary device types,supported */
+    A_UINT32 num_secondary_dev_types;
+/**
+ * followed by 8 bytes of primary device id and
+ * num_secondary_dev_types * 8 bytes of secondary device
+ * id.
+ */
+} wmi_p2p_dev_set_device_info;
+
+/** WMI_P2P_DEV_SET_DISCOVERABILITY: enable/disable discoverability
+ *  state. if enabled, an active STA/AP will respond to P2P probe requests on
+ *  the operating channel of the VDEV.
+ */
+
+typedef struct {
+    /* 1:enable disoverability, 0:disable discoverability */
+    A_UINT32 enable_discoverability;
+} wmi_p2p_set_discoverability;
+
+/** WMI_P2P_GO_SET_BEACON_IE: P2P IE to be added to
+ *  beacons generated by FW. used in FW beacon mode.
+ *  the FW will add this IE to beacon in addition to the beacon
+ *  template set by WMI_BCN_TMPL_CMDID command.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_go_set_beacon_ie_fixed_param  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* ie length */
+    A_UINT32 ie_buf_len;
+/* Following this structure is the TLV byte stream of ie data of length ie_buf_len:
+ *     A_UINT8 ie_data[]; <-- length in byte given by field num_data.
+ */
+
+} wmi_p2p_go_set_beacon_ie_fixed_param;
+
+/** WMI_P2P_GO_PROBE_RESP_IE: P2P IE to be added to
+ *  probe response generated by FW. used in FW beacon mode.
+ *  the FW will add this IE to probe response in addition to the probe response
+ *  template set by WMI_PRB_TMPL_CMDID command.
+ */
+typedef struct {
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* ie length */
+    A_UINT32 ie_buf_len;
+/*followed by  byte stream of ie data of length ie_buf_len */
+} wmi_p2p_go_set_probe_resp_ie;
+
+/** WMI_P2P_SET_VENDOR_IE_DATA_CMDID: Vendor specific P2P IE data, which will
+ *  be used by the FW to parse the P2P NoA attribute in beacons, probe resposes
+ *  and action frames received by the P2P Client.
+ *  Note: This command is currently used only for Apple P2P implementation.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_set_vendor_ie_data_cmd_fixed_param */
+    /** OS specific P2P IE OUI (3 bytes) + OUI type (1 byte)  */
+    A_UINT32 p2p_ie_oui_type;
+    /** OS specific NoA Attribute ID */
+    A_UINT32 p2p_noa_attribute;
+} wmi_p2p_set_vendor_ie_data_cmd_fixed_param;
+
+/*----P2P disc offload definition  ----*/
+
+typedef struct {
+    A_UINT32 pattern_type;
+/**
+ * TLV (tag length value)  paramerters follow the pattern structure.
+ * TLV can contain bssid list, ssid list and
+ * ie. the TLV tags are defined above;
+ */
+} wmi_p2p_disc_offload_pattern_cmd;
+
+typedef struct {
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* mgmt type of the ie*/
+    A_UINT32 mgmt_type;
+    /* ie length */
+    A_UINT32 ie_buf_len;
+/*followed by  byte stream of ie data of length ie_buf_len */
+} wmi_p2p_disc_offload_appie_cmd;
+
+typedef struct {
+    /* enable/disable p2p find offload*/
+    A_UINT32 enable;
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* p2p find type */
+    A_UINT32 disc_type;
+    /* p2p find perodic */
+    A_UINT32 perodic;
+    /* p2p find listen channel */
+    A_UINT32 listen_channel;
+    /* p2p find full channel number */
+    A_UINT32 num_scan_chans;
+/**
+ * TLV (tag length value)  paramerters follow the pattern structure.
+ * TLV  contain channel list
+ */
+} wmi_p2p_disc_offload_config_cmd;
+
+/*----P2P OppPS definition  ----*/
+typedef struct {
+    /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_set_oppps_cmd_fixed_param  */
+    A_UINT32 tlv_header;
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* OppPS attributes */
+    /** Bit  0:     Indicate enable/disable of OppPS
+     *  Bits 7-1:   Ctwindow in TUs
+     *  Bits 31-8:  Reserved
+     */
+    A_UINT32    oppps_attr;
+} wmi_p2p_set_oppps_cmd_fixed_param;
+
+#define WMI_UNIFIED_OPPPS_ATTR_ENALBED      0x1
+#define WMI_UNIFIED_OPPPS_ATTR_ENALBED_S    0
+
+#define WMI_UNIFIED_OPPPS_ATTR_IS_ENABLED(hdr)                      \
+            WMI_F_MS((hdr)->oppps_attr, WMI_UNIFIED_OPPPS_ATTR_ENALBED)
+
+#define WMI_UNIFIED_OPPPS_ATTR_ENABLED_SET(hdr)                 \
+            WMI_F_RMW((hdr)->oppps_attr, 0x1,                   \
+                WMI_UNIFIED_OPPPS_ATTR_ENALBED);
+
+#define WMI_UNIFIED_OPPPS_ATTR_CTWIN        0xfe
+#define WMI_UNIFIED_OPPPS_ATTR_CTWIN_S      1
+
+#define WMI_UNIFIED_OPPPS_ATTR_CTWIN_GET(hdr)                           \
+            WMI_F_MS((hdr)->oppps_attr, WMI_UNIFIED_OPPPS_ATTR_CTWIN)
+
+#define WMI_UNIFIED_OPPPS_ATTR_CTWIN_SET(hdr, v)                \
+            WMI_F_RMW((hdr)->oppps_attr, (v) & 0x7f,            \
+                WMI_UNIFIED_OPPPS_ATTR_CTWIN);
+
+typedef enum p2p_lo_start_ctrl_flags_e {
+    P2P_LO_START_CTRL_FLAG_FLUSH_LISTEN_RESULT = 1 << 0,  /* flush prob. req when host is awake */
+} p2p_lo_start_ctrl_flags;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 ctl_flags; /* refer to enum_p2p_lo_start_ctrl_flags_e */
+    A_UINT32 channel;   /* MHz */
+    A_UINT32 period;    /* ms */
+    A_UINT32 interval;  /* ms, interval should be larger than period */
+    A_UINT32 count;     /* 0 means forever */
+    /*
+     * device_types_len specifies the number of bytes in the
+     * device_types_data[] byte-array TLV that follows this TLV.
+     * The data in device_types_data[] is in 8-byte elements, so
+     * device_types_len will be a multiple of 8.
+     */
+    A_UINT32 device_types_len;
+    /*
+     * prob_resp_len specifies the number of bytes in the
+     * prob_resp_data[] byte-array TLV that follows this TLV.
+     */
+    A_UINT32 prob_resp_len;
+    /*
+     * Two other TLVs follow this TLV:
+     * A_UINT8 device_types_data[device_types_len];
+     * A_UINT8 prob_resp_data[prob_resp_len];
+     *     The information in device_types_data[] and prob_resp_data[]
+     *     needs to be provided to the target in over-the-air byte order.
+     *     On a big-endian host, if device_types_data and prob_resp_data
+     *     are initially in the correct over-the-air byte order,
+     *     the automatic byteswap for endianness-correction during WMI
+     *     message download will mess up the byte order.
+     *     Thus, a big-endian host needs to explicitly byte-swap the bytes
+     *     within each quad-byte segment of device_types_data[] and
+     *     prob_resp_data[], so that the automatic byte-swap applied during
+     *     WMI download from a big-endian host to the little-endian target
+     *     will restore device_types_data and prob_resp_data into the
+     *     correct byte ordering.
+     */
+} wmi_p2p_lo_start_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+} wmi_p2p_lo_stop_cmd_fixed_param;
+
+typedef enum p2p_lo_stopped_reason_e {
+    P2P_LO_STOPPED_REASON_COMPLETE = 0,   /* finished as scheduled */
+    P2P_LO_STOPPED_REASON_RECV_STOP_CMD,  /* host stops it */
+    P2P_LO_STOPPED_REASON_INVALID_LO_PAR, /* invalid listen offload par */
+    P2P_LO_STOPPED_REASON_FW_NOT_SUPPORT, /* vdev cannot support it right now */
+} p2p_lo_stopped_reason;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 reason;/* refer to p2p_lo_stopped_reason_e */
+} wmi_p2p_lo_stopped_event_fixed_param;
+
+typedef enum {
+    WMI_MNT_FILTER_CONFIG_MANAGER,
+    WMI_MNT_FILTER_CONFIG_CONTROL,
+    WMI_MNT_FILTER_CONFIG_DATA,
+    WMI_MNT_FILTER_CONFIG_ALL,
+    WMI_MNT_FILTER_CONFIG_UNKNOWN,
+} WMI_MNT_FILTER_CONFIG_TYPE;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 clear_or_set;
+    A_UINT32 configure_type; /* see WMI_MNT_FILTER_CONFIG_TYPE */
+} wmi_mnt_filter_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 time32; /* upper 32 bits of time stamp */
+    A_UINT32 time0;  /* lower 32 bits of time stamp */
+} A_TIME64;
+
+typedef enum wmi_peer_sta_kickout_reason {
+    WMI_PEER_STA_KICKOUT_REASON_UNSPECIFIED = 0,        /* default value to preserve legacy behavior */
+    WMI_PEER_STA_KICKOUT_REASON_XRETRY = 1,
+    WMI_PEER_STA_KICKOUT_REASON_INACTIVITY = 2,
+    WMI_PEER_STA_KICKOUT_REASON_IBSS_DISCONNECT = 3,
+    WMI_PEER_STA_KICKOUT_REASON_TDLS_DISCONNECT = 4,    /* TDLS peer has disappeared. All tx is failing */
+    WMI_PEER_STA_KICKOUT_REASON_SA_QUERY_TIMEOUT = 5,
+} PEER_KICKOUT_REASON;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_sta_kickout_event_fixed_param  */
+    /** peer mac address */
+    wmi_mac_addr peer_macaddr;
+    /** Reason code, defined as above */
+    A_UINT32 reason;
+    /** RSSI of the last bcn (averaged) in dB. 0 means Noise Floor value */
+    A_UINT32 rssi;
+} wmi_peer_sta_kickout_event_fixed_param;
+
+#define WMI_WLAN_PROFILE_MAX_HIST     3
+#define WMI_WLAN_PROFILE_MAX_BIN_CNT 32
+
+typedef struct _wmi_wlan_profile_t {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_t */
+    A_UINT32 id;
+    A_UINT32 cnt;
+    A_UINT32 tot;
+    A_UINT32 min;
+    A_UINT32 max;
+    A_UINT32 hist_intvl;
+    A_UINT32 hist[WMI_WLAN_PROFILE_MAX_HIST];
+} wmi_wlan_profile_t;
+
+typedef struct _wmi_wlan_profile_ctx_t {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_ctx_t */
+    A_UINT32 tot; /* time in us */
+    A_UINT32 tx_msdu_cnt;
+    A_UINT32 tx_mpdu_cnt;
+    A_UINT32 tx_ppdu_cnt;
+    A_UINT32 rx_msdu_cnt;
+    A_UINT32 rx_mpdu_cnt;
+    A_UINT32 bin_count;
+} wmi_wlan_profile_ctx_t;
+
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_trigger_cmd_fixed_param */
+    A_UINT32 enable;
+} wmi_wlan_profile_trigger_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_get_prof_data_cmd_fixed_param */
+    A_UINT32 value;
+} wmi_wlan_profile_get_prof_data_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_set_hist_intvl_cmd_fixed_param */
+    A_UINT32 profile_id;
+    A_UINT32 value;
+} wmi_wlan_profile_set_hist_intvl_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_enable_profile_id_cmd_fixed_param */
+    A_UINT32 profile_id;
+    A_UINT32 enable;
+} wmi_wlan_profile_enable_profile_id_cmd_fixed_param;
+
+/*Wifi header is upto 26, LLC is 8, with 14 byte duplicate in 802.3 header, that's 26+8-14=20.
+ 146-128=18. So this means it is converted to non-QoS header. Riva FW take care of the QOS/non-QOS
+ when comparing wifi header.*/
+/* NOTE: WOW_DEFAULT_BITMAP_PATTERN_SIZE(_DWORD) and WOW_DEFAULT_BITMASK_SIZE(_DWORD) can't be changed without breaking the compatibility */
+#define WOW_DEFAULT_BITMAP_PATTERN_SIZE      146
+#define WOW_DEFAULT_BITMAP_PATTERN_SIZE_DWORD 37 /* Convert WOW_DEFAULT_EVT_BUF_SIZE into Int32 size */
+#define WOW_DEFAULT_BITMASK_SIZE             146
+#define WOW_DEFAULT_BITMASK_SIZE_DWORD        37
+#define WOW_MAX_BITMAP_FILTERS               32
+#define WOW_DEFAULT_MAGIG_PATTERN_MATCH_CNT  16
+#define WOW_EXTEND_PATTERN_MATCH_CNT    16
+#define WOW_SHORT_PATTERN_MATCH_CNT     8
+#define WOW_DEFAULT_EVT_BUF_SIZE             148  /* Maximum 148 bytes of the data is copied starting from header incase if the match is found.
+                                                                                    The 148 comes from (128 - 14)  payload size  + 8bytes LLC + 26bytes MAC header*/
+#define WOW_DEFAULT_IOAC_PATTERN_SIZE  6
+#define WOW_DEFAULT_IOAC_PATTERN_SIZE_DWORD 2
+#define WOW_DEFAULT_IOAC_RANDOM_SIZE  6
+#define WOW_DEFAULT_IOAC_RANDOM_SIZE_DWORD 2
+#define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_SIZE   120
+#define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_SIZE_DWORD 30
+#define WOW_DEFAULT_IOAC_SOCKET_PATTERN_SIZE  32
+#define WOW_DEFAULT_IOAC_SOCKET_PATTERN_SIZE_DWORD 8
+#define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_REV_SIZE       32
+#define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_REV_SIZE_DWORD 8
+#define WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE  128
+#define WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE_DWORD 32
+
+typedef enum pattern_type_e {
+    WOW_PATTERN_MIN = 0,
+    WOW_BITMAP_PATTERN = WOW_PATTERN_MIN,
+    WOW_IPV4_SYNC_PATTERN,
+    WOW_IPV6_SYNC_PATTERN,
+    WOW_WILD_CARD_PATTERN,
+    WOW_TIMER_PATTERN,
+    WOW_MAGIC_PATTERN,
+    WOW_IPV6_RA_PATTERN,
+    WOW_IOAC_PKT_PATTERN,
+    WOW_IOAC_TMR_PATTERN,
+    WOW_IOAC_SOCK_PATTERN,
+    WOW_PATTERN_MAX
+} WOW_PATTERN_TYPE;
+
+typedef enum event_type_e {
+    WOW_BMISS_EVENT = 0,
+    WOW_BETTER_AP_EVENT,
+    WOW_DEAUTH_RECVD_EVENT,
+    WOW_MAGIC_PKT_RECVD_EVENT,
+    WOW_GTK_ERR_EVENT,
+    WOW_FOURWAY_HSHAKE_EVENT,
+    WOW_EAPOL_RECVD_EVENT,
+    WOW_NLO_DETECTED_EVENT,
+    WOW_DISASSOC_RECVD_EVENT,
+    WOW_PATTERN_MATCH_EVENT,
+    WOW_CSA_IE_EVENT,
+    WOW_PROBE_REQ_WPS_IE_EVENT,
+    WOW_AUTH_REQ_EVENT,
+    WOW_ASSOC_REQ_EVENT,
+    WOW_HTT_EVENT,
+    WOW_RA_MATCH_EVENT,
+    WOW_HOST_AUTO_SHUTDOWN_EVENT,
+    WOW_IOAC_MAGIC_EVENT,
+    WOW_IOAC_SHORT_EVENT,
+    WOW_IOAC_EXTEND_EVENT,
+    WOW_IOAC_TIMER_EVENT,
+    WOW_DFS_PHYERR_RADAR_EVENT,
+    WOW_BEACON_EVENT,
+    WOW_CLIENT_KICKOUT_EVENT,
+    WOW_NAN_EVENT,
+    WOW_EXTSCAN_EVENT,
+    WOW_IOAC_REV_KA_FAIL_EVENT,
+    WOW_IOAC_SOCK_EVENT,
+    WOW_NLO_SCAN_COMPLETE_EVENT,
+    WOW_NAN_DATA_EVENT,
+    WOW_NAN_RTT_EVENT, /* DEPRECATED, UNUSED */
+    WOW_OEM_RESPONSE_EVENT = WOW_NAN_RTT_EVENT, /* reuse deprecated event value */
+    WOW_TDLS_CONN_TRACKER_EVENT,
+    WOW_CRITICAL_LOG_EVENT,
+} WOW_WAKE_EVENT_TYPE;
+
+typedef enum wake_reason_e {
+    WOW_REASON_UNSPECIFIED = -1,
+    WOW_REASON_NLOD = 0,
+    WOW_REASON_AP_ASSOC_LOST,
+    WOW_REASON_LOW_RSSI,
+    WOW_REASON_DEAUTH_RECVD,
+    WOW_REASON_DISASSOC_RECVD,
+    WOW_REASON_GTK_HS_ERR,
+    WOW_REASON_EAP_REQ,
+    WOW_REASON_FOURWAY_HS_RECV,
+    WOW_REASON_TIMER_INTR_RECV,
+    WOW_REASON_PATTERN_MATCH_FOUND,
+    WOW_REASON_RECV_MAGIC_PATTERN,
+    WOW_REASON_P2P_DISC,
+    WOW_REASON_WLAN_HB,
+    WOW_REASON_CSA_EVENT,
+    WOW_REASON_PROBE_REQ_WPS_IE_RECV,
+    WOW_REASON_AUTH_REQ_RECV,
+    WOW_REASON_ASSOC_REQ_RECV,
+    WOW_REASON_HTT_EVENT,
+    WOW_REASON_RA_MATCH,
+    WOW_REASON_HOST_AUTO_SHUTDOWN,
+    WOW_REASON_IOAC_MAGIC_EVENT,
+    WOW_REASON_IOAC_SHORT_EVENT,
+    WOW_REASON_IOAC_EXTEND_EVENT,
+    WOW_REASON_IOAC_TIMER_EVENT,
+    WOW_REASON_ROAM_HO,
+    WOW_REASON_DFS_PHYERR_RADADR_EVENT,
+    WOW_REASON_BEACON_RECV,
+    WOW_REASON_CLIENT_KICKOUT_EVENT,
+    WOW_REASON_NAN_EVENT,
+    WOW_REASON_EXTSCAN,
+    WOW_REASON_RSSI_BREACH_EVENT,
+    WOW_REASON_IOAC_REV_KA_FAIL_EVENT,
+    WOW_REASON_IOAC_SOCK_EVENT,
+    WOW_REASON_NLO_SCAN_COMPLETE,
+    WOW_REASON_PACKET_FILTER_MATCH,
+    WOW_REASON_ASSOC_RES_RECV,
+    WOW_REASON_REASSOC_REQ_RECV,
+    WOW_REASON_REASSOC_RES_RECV,
+    WOW_REASON_ACTION_FRAME_RECV,
+    WOW_REASON_BPF_ALLOW,
+    WOW_REASON_NAN_DATA,
+    WOW_REASON_NAN_RTT, /* DEPRECATED, UNUSED */
+    WOW_REASON_OEM_RESPONSE_EVENT = WOW_REASON_NAN_RTT, /* reuse deprecated reason value */
+    WOW_REASON_TDLS_CONN_TRACKER_EVENT,
+    WOW_REASON_CRITICAL_LOG,
+    WOW_REASON_P2P_LISTEN_OFFLOAD,
+    WOW_REASON_NAN_EVENT_WAKE_HOST,
+    WOW_REASON_DEBUG_TEST = 0xFF,
+} WOW_WAKE_REASON_TYPE;
+
+
+typedef enum {
+    WOW_IFACE_PAUSE_ENABLED,
+    WOW_IFACE_PAUSE_DISABLED
+} WOW_IFACE_STATUS;
+
+enum {
+    WMI_WOW_FLAG_IGNORE_PCIE_RESET = 0x00000001, /* some win10 platfrom will not assert pcie_reset for wow.*/
+    /* WMI_WOW_FLAG_SEND_PM_PME
+     * Some platforms have issues if the PM_PME message is sent after WoW,
+     * so don't send PM_PME after WoW unless the host uses this flag
+     * to request it.
+     */
+    WMI_WOW_FLAG_SEND_PM_PME       = 0x00000002,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wow_enable_cmd_fixed_param  */
+    A_UINT32 enable;
+    A_UINT32 pause_iface_config;
+    A_UINT32 flags;  /* WMI_WOW_FLAG enums */
+} wmi_wow_enable_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wow_hostwakeup_from_sleep_cmd_fixed_param  */
+    /** Reserved for future use */
+    A_UINT32 reserved0;
+} wmi_wow_hostwakeup_from_sleep_cmd_fixed_param;
+
+#define WOW_ICMPV6_NA_FILTER_DISABLE 0
+#define WOW_ICMPV6_NA_FILTER_ENABLE 1
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wow_enable_icmpv6_na_flt_cmd_fixed_param  */
+    A_UINT32 vdev_id;
+    A_UINT32 enable; /* WOW_ICMPV6_NA_FILTER_ENABLE/DISABLE */
+} wmi_wow_enable_icmpv6_na_flt_cmd_fixed_param;
+
+typedef struct bitmap_pattern_s {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_BITMAP_PATTERN_T */
+    A_UINT32 patternbuf[WOW_DEFAULT_BITMAP_PATTERN_SIZE_DWORD];
+    A_UINT32 bitmaskbuf[WOW_DEFAULT_BITMASK_SIZE_DWORD];
+    A_UINT32 pattern_offset;
+    A_UINT32 pattern_len;
+    A_UINT32 bitmask_len;
+    A_UINT32 pattern_id; /* must be less than max_bitmap_filters */
+} WOW_BITMAP_PATTERN_T;
+
+typedef struct ipv4_sync_s {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IPV4_SYNC_PATTERN_T */
+    A_UINT32 ipv4_src_addr;
+    A_UINT32 ipv4_dst_addr;
+    A_UINT32 tcp_src_prt;
+    A_UINT32 tcp_dst_prt;
+} WOW_IPV4_SYNC_PATTERN_T;
+
+typedef struct ipv6_sync_s {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IPV6_SYNC_PATTERN_T */
+    A_UINT32 ipv6_src_addr[4];
+    A_UINT32 ipv6_dst_addr[4];
+    A_UINT32 tcp_src_prt;
+    A_UINT32 tcp_dst_prt;
+} WOW_IPV6_SYNC_PATTERN_T;
+
+typedef struct WOW_MAGIC_PATTERN_CMD
+{
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_MAGIC_PATTERN_CMD */
+    wmi_mac_addr macaddr;
+} WOW_MAGIC_PATTERN_CMD;
+
+typedef enum wow_ioac_pattern_type {
+    WOW_IOAC_MAGIC_PATTERN = 1,
+    WOW_IOAC_SHORT_PATTERN,
+    WOW_IOAC_EXTEND_PATTERN,
+} WOW_IOAC_PATTERN_TYPE;
+
+typedef struct ioac_sock_pattern_s {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IOAC_SOCK_PATTERN_T */
+    A_UINT32 id;
+    A_UINT32 local_ipv4;
+    A_UINT32 remote_ipv4;
+    A_UINT32 local_port;
+    A_UINT32 remote_port;
+    A_UINT32 pattern_len; /* units = bytes */
+    A_UINT32 pattern[WOW_DEFAULT_IOAC_SOCKET_PATTERN_SIZE_DWORD];
+    WMI_IPV6_ADDR local_ipv6;
+    WMI_IPV6_ADDR remote_ipv6;
+    A_UINT32 ack_nak_len;
+    A_UINT32 ackpkt[WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE_DWORD];
+    A_UINT32 nakpkt[WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE_DWORD];
+} WOW_IOAC_SOCK_PATTERN_T;
+
+typedef struct ioac_pkt_pattern_s {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IOAC_PKT_PATTERN_T */
+    A_UINT32 pattern_type;
+    A_UINT32 pattern[WOW_DEFAULT_IOAC_PATTERN_SIZE_DWORD];
+    A_UINT32 random[WOW_DEFAULT_IOAC_RANDOM_SIZE_DWORD];
+    A_UINT32 pattern_len;
+    A_UINT32 random_len;
+} WOW_IOAC_PKT_PATTERN_T;
+
+typedef struct ioac_tmr_pattern_s {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IOAC_TMR_PATTERN_T */
+    A_UINT32 wake_in_s;
+    A_UINT32 vdev_id;
+} WOW_IOAC_TMR_PATTERN_T;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_KEEPALIVE_CMD_fixed_param */
+    A_UINT32 nID;
+} WMI_WOW_IOAC_ADD_KEEPALIVE_CMD_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_KEEPALIVE_CMD_fixed_param */
+    A_UINT32 nID;
+} WMI_WOW_IOAC_DEL_KEEPALIVE_CMD_fixed_param;
+
+typedef struct ioac_keepalive_s {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_KEEPALIVE_T */
+    A_UINT32 keepalive_pkt_buf[WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_SIZE_DWORD];
+    A_UINT32 keepalive_pkt_len;
+    A_UINT32 period_in_ms;
+    A_UINT32 vdev_id;
+    A_UINT32 max_loss_cnt;
+    A_UINT32 local_ipv4;
+    A_UINT32 remote_ipv4;
+    A_UINT32 local_port;
+    A_UINT32 remote_port;
+    A_UINT32 recv_period_in_ms;
+    A_UINT32 rev_ka_size;
+    A_UINT32 rev_ka_data[WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_REV_SIZE_DWORD];
+    WMI_IPV6_ADDR local_ipv6;
+    WMI_IPV6_ADDR remote_ipv6;
+} WMI_WOW_IOAC_KEEPALIVE_T;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_PATTERN_CMD_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 pattern_type;
+/*
+ * Following this struct are these TLVs. Note that they are all array of structures
+ * but can have at most one element. Which TLV is empty or has one element depends
+ * on the field pattern_type. This is to emulate an union.
+ *     WOW_IOAC_PKT_PATTERN_T pattern_info_pkt[];
+ *     WOW_IOAC_TMR_PATTERN_T pattern_info_tmr[];
+ */
+} WMI_WOW_IOAC_ADD_PATTERN_CMD_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_PATTERN_CMD_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 pattern_type;
+    A_UINT32 pattern_id;
+} WMI_WOW_IOAC_DEL_PATTERN_CMD_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_ADD_PATTERN_CMD_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 pattern_id;
+    A_UINT32 pattern_type;
+/*
+ * Following this struct are these TLVs. Note that they are all array of structures
+ * but can have at most one element. Which TLV is empty or has one element depends
+ * on the field pattern_type. This is to emulate an union.
+ *     WOW_BITMAP_PATTERN_T       pattern_info_bitmap[];
+ *     WOW_IPV4_SYNC_PATTERN_T    pattern_info_ipv4[];
+ *     WOW_IPV6_SYNC_PATTERN_T    pattern_info_ipv6[];
+ *     WOW_MAGIC_PATTERN_CMD      pattern_info_magic_pattern[];
+ *     A_UINT32                   pattern_info_timeout[];
+ *     A_UINT32                   ra_ratelimit_interval;
+ */
+} WMI_WOW_ADD_PATTERN_CMD_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_DEL_PATTERN_CMD_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 pattern_id;
+    A_UINT32 pattern_type;
+} WMI_WOW_DEL_PATTERN_CMD_fixed_param;
+
+#define WMI_WOW_MAX_EVENT_BM_LEN 4
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_ADD_DEL_EVT_CMD_fixed_param  */
+    A_UINT32 vdev_id;
+    A_UINT32 is_add;
+    union {
+        A_UINT32 event_bitmap;
+        A_UINT32 event_bitmaps[WMI_WOW_MAX_EVENT_BM_LEN];
+    };
+} WMI_WOW_ADD_DEL_EVT_CMD_fixed_param;
+
+/*
+ * This structure is used to set the pattern to check UDP packet in WOW mode.
+ * If match, construct a tx frame in a local buffer to send through the peer
+ * AP to the entity in the IP network that sent the UDP packet to this STA.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param  */
+    A_UINT32 vdev_id;
+    A_UINT32 enable; /* 1: enable, 0: disable*/
+    /* dest_port -
+     * bits 7:0  contain the LSB of the UDP dest port,
+     * bits 15:8 contain the MSB of the UDP dest port
+     */
+    A_UINT32 dest_port;
+    A_UINT32 pattern_len; /* length in byte of pattern[] */
+    A_UINT32 response_len; /* length in byte of response[] */
+/* Following this struct are the TLV's:
+ *  A_UINT8 pattern[];  <-- payload of UDP packet to be checked, network byte order
+ *  A_UINT8 response[]; <-- payload of UDP packet to be response, network byte order
+ */
+} WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param;
+
+/*
+ * This structure is used to set the pattern for WOW host wakeup pin pulse pattern confirguration.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_HOSTWAKEUP_PIN_PATTERN_CONFIG_CMD_fixed_param  */
+    A_UINT32 enable; /* 1: enable, 0: disable */
+    A_UINT32 pin; /* pin for host wakeup */
+    A_UINT32 interval_low; /* interval for keeping low voltage, unit: ms */
+    A_UINT32 interval_high; /* interval for keeping high voltage, unit: ms */
+    A_UINT32 repeat_cnt; /* repeat times for pulse (0xffffffff means forever) */
+} WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMD_fixed_param;
+
+#define MAX_SUPPORTED_ACTION_CATEGORY           256
+#define MAX_SUPPORTED_ACTION_CATEGORY_ELE_LIST  (MAX_SUPPORTED_ACTION_CATEGORY/32)
+
+typedef enum {
+    WOW_ACTION_WAKEUP_OPERATION_RESET = 0,
+    WOW_ACTION_WAKEUP_OPERATION_SET,
+    WOW_ACTION_WAKEUP_OPERATION_ADD_SET,
+    WOW_ACTION_WAKEUP_OPERATION_DELETE_SET,
+} WOW_ACTION_WAKEUP_OPERATION;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 operation; /* 0 reset to fw default, 1 set the bits, 2 add the setting bits, 3 delete the setting bits */
+    A_UINT32 action_category_map[MAX_SUPPORTED_ACTION_CATEGORY_ELE_LIST];
+} WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param;
+
+typedef struct wow_event_info_s {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_EVENT_INFO_fixed_param  */
+    A_UINT32 vdev_id;
+    A_UINT32 flag; /*This is current reserved.*/
+    A_INT32 wake_reason;
+    A_UINT32 data_len;
+} WOW_EVENT_INFO_fixed_param;
+
+typedef struct wow_initial_wakeup_event_s {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WOW_INITIAL_WAKEUP_EVENT_fixed_param  */
+    A_UINT32 vdev_id;
+} WOW_INITIAL_WAKEUP_EVENT_fixed_param;
+
+typedef enum {
+    WOW_EVENT_INFO_TYPE_PACKET = 0x0001,
+    WOW_EVENT_INFO_TYPE_BITMAP,
+    WOW_EVENT_INFO_TYPE_GTKIGTK,
+} WOW_EVENT_INFO_TYPE;
+
+typedef struct wow_event_info_section_s {
+    A_UINT32 data_type;
+    A_UINT32 data_len;
+} WOW_EVENT_INFO_SECTION;
+
+typedef struct wow_event_info_section_packet_s {
+    A_UINT8 packet[WOW_DEFAULT_EVT_BUF_SIZE];
+} WOW_EVENT_INFO_SECTION_PACKET;
+
+typedef struct wow_event_info_section_bitmap_s {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_EVENT_INFO_SECTION_BITMAP  */
+    A_UINT32 flag; /*This is current reserved.*/
+    A_UINT32 value; /*This could be the pattern id for bitmap pattern.*/
+    A_UINT32 org_len; /*The length of the orginal packet.*/
+} WOW_EVENT_INFO_SECTION_BITMAP;
+
+/**
+ * This command is sent from WLAN host driver to firmware to
+ * enable or disable D0-WOW. D0-WOW means APSS suspend with
+ * PCIe link and DDR being active.
+ *
+ *
+ * Entering D0-WOW Mode (based on kernel suspend request):
+ *    host->target: WMI_DO_WOW_ENABLE_DISABLE_CMDID (enable = 1)
+ *    target: Take action (e.g. dbglog suspend)
+ *    target->host: HTC_ACK (HTC_MSG_SEND_SUSPEND_COMPLETE message)
+ *
+ * Exiting D0-WOW mode (based on kernel resume OR target->host message received)
+ *    host->target: WMI_DO_WOW_ENABLE_DISABLE_CMDID (enable = 0)
+ *    target: Take action (e.g. dbglog resume)
+ *    target->host: WMI_D0_WOW_DISABLE_ACK_EVENTID
+ *
+ * This command is applicable only on the PCIE LL systems
+ * Host can enter either D0-WOW or WOW mode, but NOT both at same time
+ * Decision to enter D0-WOW or WOW is based on active interfaces
+ *
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_d0_wow_enable_disable_cmd_fixed_param  */
+    A_UINT32 enable;     /* 1 = enable, 0 = disable */
+} wmi_d0_wow_enable_disable_cmd_fixed_param;
+
+
+typedef enum extend_wow_type_e {
+    EXTWOW_TYPE_APP_TYPE1,   /* extend wow type: only enable wakeup for app type1 */
+    EXTWOW_TYPE_APP_TYPE2,   /* extend wow type: only enable wakeup for app type2 */
+    EXTWOW_TYPE_APP_TYPE1_2, /* extend wow type: enable wakeup for app type1&2 */
+    EXTWOW_TYPE_APP_PULSETEST,
+    EXTWOW_DISABLED = 255,
+} EXTWOW_TYPE;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_extwow_enable_cmd_fixed_param  */
+    A_UINT32 vdev_id;
+    A_UINT32 type;
+    A_UINT32 wakeup_pin_num;
+    A_UINT32 swol_pulsetest_type;
+    A_UINT32 swol_pulsetest_application;
+} wmi_extwow_enable_cmd_fixed_param;
+
+#define SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX 8
+#define SWOL_INDOOR_KEY_LEN 16
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_extwow_set_app_type1_params_cmd_fixed_param  */
+    A_UINT32 vdev_id;
+    wmi_mac_addr  wakee_mac;
+    A_UINT8  ident[8];
+    A_UINT8  passwd[16];
+    A_UINT32 ident_len;
+    A_UINT32 passwd_len;
+
+    /* indoor check parameters */
+    /* key for mac addresses specified in swol_indoor_key_mac
+     * Big-endian hosts need to byte-swap the bytes within each 4-byte
+     * segment of this array, so the bytes will return to their original
+     * order when the entire WMI message contents are byte-swapped to
+     * convert from big-endian to little-endian format.
+     */
+    A_UINT8 swol_indoor_key[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX][SWOL_INDOOR_KEY_LEN];
+    /* key length for specified mac address index
+     * Big-endian hosts need to byte-swap the bytes within each 4-byte
+     * segment of this array, so the bytes will return to their original
+     * order when the entire WMI message contents are byte-swapped to
+     * convert from big-endian to little-endian format.
+     */
+    A_UINT8 swol_indoor_key_len[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX];
+    /* mac address array allowed to wakeup host*/
+    wmi_mac_addr swol_indoor_key_mac[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX];
+    /* app mask for the mac addresses specified in swol_indoor_key_mac */
+    A_UINT32 swol_indoor_app_mask[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX];
+    A_UINT32 swol_indoor_waker_check; /* whether to do indoor waker check */
+    A_UINT32 swol_indoor_pw_check;    /* whether to check password */
+    A_UINT32 swol_indoor_pattern;     /* wakeup pattern */
+    A_UINT32 swol_indoor_exception;   /* wakeup when exception happens */
+    A_UINT32 swol_indoor_exception_app;
+    A_UINT32 swol_assist_enable;      /* whether to enable IoT mode */
+} wmi_extwow_set_app_type1_params_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;  /* TLV tag and len; tag equals wmi_extwow_set_app_type2_params_cmd_fixed_param  */
+    A_UINT32 vdev_id;
+
+    A_UINT8  rc4_key[16];
+    A_UINT32 rc4_key_len;
+
+    /** ip header parameter */
+    A_UINT32 ip_id;         /* NC id */
+    A_UINT32 ip_device_ip;  /* NC IP address */
+    A_UINT32 ip_server_ip;  /* Push server IP address */
+
+    /** tcp header parameter */
+    A_UINT16 tcp_src_port;  /* NC TCP port */
+    A_UINT16 tcp_dst_port;  /* Push server TCP port */
+    A_UINT32 tcp_seq;
+    A_UINT32 tcp_ack_seq;
+
+    A_UINT32 keepalive_init;  /* Initial ping interval */
+    A_UINT32 keepalive_min;   /* Minimum ping interval */
+    A_UINT32 keepalive_max;   /* Maximum ping interval */
+    A_UINT32 keepalive_inc;   /* Increment of ping interval */
+
+    wmi_mac_addr gateway_mac;
+    A_UINT32 tcp_tx_timeout_val;
+    A_UINT32 tcp_rx_timeout_val;
+
+    /** add extra parameter for backward-compatible */
+    /*
+     * For all byte arrays, natural order is used.  E.g.
+     * rc4_write_sandbox[0] holds the 1st RC4 S-box byte,
+     * rc4_write_sandbox[1] holds the 2nd RC4 S-box byte, etc.
+     */
+
+    /* used to encrypt transmit packet such as keep-alive */
+    A_UINT8  rc4_write_sandbox[256];
+    A_UINT32 rc4_write_x;
+    A_UINT32 rc4_write_y;
+
+    /* used to decrypt received packet such as wow data */
+    A_UINT8  rc4_read_sandbox[256];
+    A_UINT32 rc4_read_x;
+    A_UINT32 rc4_read_y;
+
+    /* used to caculate HMAC hash for transmit packet such as keep-alive */
+    A_UINT8  ssl_write_seq[8];
+    A_UINT8  ssl_sha1_write_key[64];
+    A_UINT32 ssl_sha1_write_key_len;
+
+    /* used to calculate HAMC hash for receive packet such as wow data */
+    A_UINT8  ssl_read_seq[8];
+    A_UINT8  ssl_sha1_read_key[64];
+    A_UINT32 ssl_sha1_read_key_len;
+
+    /* optional element for specifying TCP options data to include in
+     * transmit packets such as keep-alive
+     */
+    A_UINT32 tcp_options_len;
+    A_UINT8  tcp_options[40];
+
+    A_UINT32 async_id; /* keep-alive request id */
+} wmi_extwow_set_app_type2_params_cmd_fixed_param;
+
+
+#define WMI_RXERR_CRC               0x01    /* CRC error on frame */
+#define WMI_RXERR_DECRYPT           0x08    /* non-Michael decrypt error */
+#define WMI_RXERR_MIC               0x10    /* Michael MIC decrypt error */
+#define WMI_RXERR_KEY_CACHE_MISS    0x20    /* No/incorrect key matter in h/w */
+
+typedef enum {
+    PKT_PWR_SAVE_PAID_MATCH =       0x0001,
+    PKT_PWR_SAVE_GID_MATCH =        0x0002,
+    PKT_PWR_SAVE_EARLY_TIM_CLEAR =  0x0004,
+    PKT_PWR_SAVE_EARLY_DTIM_CLEAR = 0x0008,
+    PKT_PWR_SAVE_EOF_PAD_DELIM =    0x0010,
+    PKT_PWR_SAVE_MACADDR_MISMATCH = 0x0020,
+    PKT_PWR_SAVE_DELIM_CRC_FAIL =   0x0040,
+    PKT_PWR_SAVE_GID_NSTS_ZERO =    0x0080,
+    PKT_PWR_SAVE_RSSI_CHECK =       0x0100,
+    PKT_PWR_SAVE_5G_EBT =           0x0200,
+    PKT_PWR_SAVE_2G_EBT =           0x0400,
+    WMI_PKT_PWR_SAVE_MAX =          0x0800,
+} WMI_PKT_PWR_SAVE_TYPE;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ftm_intg_cmd_fixed_param */
+    A_UINT32 num_data; /** length in byte of data[]. */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+/* This structure is used to send Factory Test Mode [FTM] command
+ * from host to firmware for integrated chips which are binary blobs.
+ * Following this structure is the TLV:
+ *     A_UINT8 data[]; <-- length in byte given by field num_data.
+ */
+} wmi_ftm_intg_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ftm_intg_event_fixed_param */
+    A_UINT32 num_data; /** length in byte of data[]. */
+/* This structure is used to receive Factory Test Mode [FTM] event
+ * from firmware to host for integrated chips which are binary blobs.
+ * Following this structure is the TLV:
+ *     A_UINT8 data[]; <-- length in byte given by field num_data.
+ */
+} wmi_ftm_intg_event_fixed_param;
+
+#define WMI_MAX_NS_OFFLOADS           2
+#define WMI_MAX_ARP_OFFLOADS          2
+
+#define WMI_ARPOFF_FLAGS_VALID              (1 << 0)    /* the tuple entry is valid */
+#define WMI_ARPOFF_FLAGS_MAC_VALID          (1 << 1)    /* the target mac address is valid */
+#define WMI_ARPOFF_FLAGS_REMOTE_IP_VALID    (1 << 2)    /* remote IP field is valid */
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_ARP_OFFLOAD_TUPLE */
+    A_UINT32 flags; /* flags */
+    A_UINT8 target_ipaddr[4]; /* IPV4 addresses of the local node*/
+    A_UINT8 remote_ipaddr[4]; /* source address of the remote node requesting the ARP (qualifier) */
+    wmi_mac_addr target_mac; /* mac address for this tuple, if not valid, the local MAC is used */
+} WMI_ARP_OFFLOAD_TUPLE;
+
+#define WMI_NSOFF_FLAGS_VALID           (1 << 0)    /* the tuple entry is valid */
+#define WMI_NSOFF_FLAGS_MAC_VALID       (1 << 1)    /* the target mac address is valid */
+#define WMI_NSOFF_FLAGS_REMOTE_IP_VALID (1 << 2)    /* remote IP field is valid */
+#define WMI_NSOFF_FLAGS_IS_IPV6_ANYCAST (1 << 3)    /* whether the configured IPv6 address is anycast */
+
+#define WMI_NSOFF_MAX_TARGET_IPS    2
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_NS_OFFLOAD_TUPLE */
+    A_UINT32 flags; /* flags */
+    /* NOTE: This size of array target_ipaddr[] cannot be changed without breaking WMI compatibility. */
+    WMI_IPV6_ADDR target_ipaddr[WMI_NSOFF_MAX_TARGET_IPS]; /* IPV6 target addresses of the local node  */
+    WMI_IPV6_ADDR solicitation_ipaddr; /* multi-cast source IP addresses for receiving solicitations */
+    WMI_IPV6_ADDR remote_ipaddr; /* address of remote node requesting the solicitation (qualifier) */
+    wmi_mac_addr target_mac; /* mac address for this tuple, if not valid, the local MAC is used */
+} WMI_NS_OFFLOAD_TUPLE;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param */
+    A_UINT32 flags;
+    A_UINT32 vdev_id;
+    A_UINT32 num_ns_ext_tuples;
+/* Following this structure are the TLVs:
+ *     WMI_NS_OFFLOAD_TUPLE  ns_tuples[WMI_MAX_NS_OFFLOADS];
+ *     WMI_ARP_OFFLOAD_TUPLE arp_tuples[WMI_MAX_ARP_OFFLOADS];
+ *     WMI_NS_OFFLOAD_TUPLE  ns_ext_tuples[]; <-- size based on num_ns_ext_tuples
+ */
+} WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param;
+
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 pattern_id;
+    A_UINT32 timeout;
+    A_UINT32 length;
+    /*Following this would be the pattern
+       A_UINT8 pattern[] of length specifed by length
+       field in the structure.*/
+} WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param;
+
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 pattern_id;
+} WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_tid_addba_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+    /** Initiator (1) or Responder (0) for this aggregation */
+    A_UINT32 initiator;
+    /** size of the negotiated window */
+    A_UINT32 window_size;
+    /** starting sequence number (only valid for initiator) */
+    A_UINT32 ssn;
+    /** timeout field represents the time to wait for Block Ack in
+     *   initiator case and the time to wait for BAR in responder
+     *   case. 0 represents no timeout. */
+    A_UINT32 timeout;
+    /* BA policy: immediate ACK (0) or delayed ACK (1) */
+    A_UINT32 policy;
+} wmi_peer_tid_addba_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_tid_delba_cmd */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+    /** Initiator (1) or Responder (0) for this aggregation */
+    A_UINT32 initiator;
+} wmi_peer_tid_delba_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tx_addba_complete_event_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+    /** Event status */
+    A_UINT32 status;
+} wmi_tx_addba_complete_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tx_delba_complete_event_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /** Tid number */
+    A_UINT32 tid;
+    /** Event status */
+    A_UINT32 status;
+} wmi_tx_delba_complete_event_fixed_param;
+
+
+
+/*
+ * Structure to request sequence numbers for a given
+ * peer station on different TIDs. The TIDs are
+ * indicated in the tidBitMap, tid 0 would
+ * be represented by LSB bit 0. tid 1 would be
+ * represented by LSB bit 1 etc.
+ * The target will retrieve the current sequence
+ * numbers for the peer on all the TIDs requested
+ * and send back a response in a WMI event.
+ */
+typedef struct
+{
+    A_UINT32    tlv_header;  /* TLV tag and len; tag equals
+                                WMITLV_TAG_STRUC_wmi_ba_req_ssn_cmd_sub_struct_param */
+    wmi_mac_addr peer_macaddr;
+    A_UINT32 tidBitmap;
+} wmi_ba_req_ssn;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals
+     WMITLV_TAG_STRUC_wmi_ba_req_ssn_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** Number of requested SSN In the TLV wmi_ba_req_ssn[] */
+    A_UINT32 num_ba_req_ssn;
+/* Following this struc are the TLV's:
+ *     wmi_ba_req_ssn ba_req_ssn_list; All peer and tidBitMap for which the ssn is requested
+ */
+} wmi_ba_req_ssn_cmd_fixed_param;
+
+/*
+ * Max transmit categories
+ *
+ * Note: In future if we need to increase WMI_MAX_TC definition
+ * It would break the compatibility for WMI_BA_RSP_SSN_EVENTID.
+ */
+#define WMI_MAX_TC  8
+
+/*
+ * Structure to send response sequence numbers
+ * for a give peer and tidmap.
+ */
+typedef struct
+{
+    A_UINT32    tlv_header;  /* TLV tag and len; tag equals
+                                WMITLV_TAG_STRUC_wmi_ba_req_ssn_event_sub_struct_param */
+    wmi_mac_addr peer_macaddr;
+    /* A boolean to indicate if ssn is present */
+    A_UINT32 ssn_present_for_tid[WMI_MAX_TC];
+    /* The ssn from target, valid only if
+     * ssn_present_for_tid[tidn] equals 1
+     */
+    A_UINT32 ssn_for_tid[WMI_MAX_TC];
+} wmi_ba_event_ssn;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals
+     WMITLV_TAG_STRUC_wmi_ba_rsp_ssn_event_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** Event status, success or failure of the overall operation */
+    A_UINT32 status;
+    /** Number of requested SSN In the TLV wmi_ba_req_ssn[] */
+    A_UINT32 num_ba_event_ssn;
+/* Following this struc are the TLV's:
+ *     wmi_ba_event_ssn ba_event_ssn_list; All peer and tidBitMap for which the ssn is requested
+ */
+} wmi_ba_rsp_ssn_event_fixed_param;
+
+
+enum wmi_aggr_state_req_type {
+
+    WMI_DISABLE_AGGREGATION,
+    WMI_ENABLE_AGGREGATION
+};
+
+/*
+ * This event is generated by the COEX module
+ * when esco call is begins the coex module in fw genrated this event to host to
+ * disable the RX aggregation and after completion of the esco call fw will indicate to
+ * enable back the Rx aggregation .
+*/
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_aggr_state_trig_event_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+   /** req_type  contains values from enum
+     *  wmi_aggr_state_req_type; 0 (disable) 1(enable) */
+    A_UINT32  req_type;
+} wmi_aggr_state_trig_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_install_key_complete_event_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** MAC address used for installing   */
+    wmi_mac_addr peer_macaddr;
+    /** key index */
+    A_UINT32 key_ix;
+    /** key flags */
+    A_UINT32 key_flags;
+    /** Event status */
+    A_UINT32 status;
+} wmi_vdev_install_key_complete_event_fixed_param;
+
+typedef enum _WMI_NLO_AUTH_ALGORITHM {
+    WMI_NLO_AUTH_ALGO_80211_OPEN = 1,
+    WMI_NLO_AUTH_ALGO_80211_SHARED_KEY = 2,
+    WMI_NLO_AUTH_ALGO_WPA = 3,
+    WMI_NLO_AUTH_ALGO_WPA_PSK = 4,
+    WMI_NLO_AUTH_ALGO_WPA_NONE = 5,
+    WMI_NLO_AUTH_ALGO_RSNA = 6,
+    WMI_NLO_AUTH_ALGO_RSNA_PSK = 7,
+} WMI_NLO_AUTH_ALGORITHM;
+
+typedef enum _WMI_NLO_CIPHER_ALGORITHM {
+    WMI_NLO_CIPHER_ALGO_NONE = 0x00,
+    WMI_NLO_CIPHER_ALGO_WEP40 = 0x01,
+    WMI_NLO_CIPHER_ALGO_TKIP = 0x02,
+    WMI_NLO_CIPHER_ALGO_CCMP = 0x04,
+    WMI_NLO_CIPHER_ALGO_WEP104 = 0x05,
+    WMI_NLO_CIPHER_ALGO_BIP = 0x06,
+    WMI_NLO_CIPHER_ALGO_WPA_USE_GROUP = 0x100,
+    WMI_NLO_CIPHER_ALGO_RSN_USE_GROUP = 0x100,
+    WMI_NLO_CIPHER_ALGO_WEP = 0x101,
+} WMI_NLO_CIPHER_ALGORITHM;
+
+/* SSID broadcast  type passed in NLO params */
+typedef enum _WMI_NLO_SSID_BcastNwType
+{
+  WMI_NLO_BCAST_UNKNOWN      = 0,
+  WMI_NLO_BCAST_NORMAL       = 1,
+  WMI_NLO_BCAST_HIDDEN       = 2,
+} WMI_NLO_SSID_BcastNwType;
+
+#define WMI_NLO_MAX_SSIDS    16
+#define WMI_NLO_MAX_CHAN     48
+
+#define WMI_NLO_CONFIG_STOP             (0x1 << 0)
+#define WMI_NLO_CONFIG_START            (0x1 << 1)
+#define WMI_NLO_CONFIG_RESET            (0x1 << 2)
+#define WMI_NLO_CONFIG_SLOW_SCAN        (0x1 << 4)
+#define WMI_NLO_CONFIG_FAST_SCAN        (0x1 << 5)
+#define WMI_NLO_CONFIG_SSID_HIDE_EN     (0x1 << 6)
+
+/* This bit is used to indicate if EPNO Profile is enabled */
+#define WMI_NLO_CONFIG_ENLO             (0x1 << 7)
+#define WMI_NLO_CONFIG_SCAN_PASSIVE     (0x1 << 8)
+#define WMI_NLO_CONFIG_ENLO_RESET       (0x1 << 9)
+
+/* Whether directed scan needs to be performed (for hidden SSIDs) */
+#define WMI_ENLO_FLAG_DIRECTED_SCAN      1
+/* Whether PNO event shall be triggered if the network is found on A band */
+#define WMI_ENLO_FLAG_A_BAND             2
+/* Whether PNO event shall be triggered if the network is found on G band */
+#define WMI_ENLO_FLAG_G_BAND             4
+/* Whether strict matching is required (i.e. firmware shall not match on the entire SSID) */
+#define WMI_ENLO_FLAG_STRICT_MATCH       8
+
+/* Code for matching the beacon AUTH IE - additional codes TBD */
+/* open */
+#define WMI_ENLO_AUTH_CODE_OPEN  1
+/* WPA_PSK or WPA2PSK */
+#define WMI_ENLO_AUTH_CODE_PSK   2
+/* any EAPOL */
+#define WMI_ENLO_AUTH_CODE_EAPOL 4
+
+/* NOTE: wmi_nlo_ssid_param structure can't be changed without breaking the compatibility */
+typedef struct wmi_nlo_ssid_param
+{
+    A_UINT32 valid;
+    wmi_ssid ssid;
+} wmi_nlo_ssid_param;
+
+/* NOTE: wmi_nlo_enc_param structure can't be changed without breaking the compatibility */
+typedef struct wmi_nlo_enc_param
+{
+    A_UINT32 valid;
+    A_UINT32 enc_type;
+} wmi_nlo_enc_param;
+
+/* NOTE: wmi_nlo_auth_param structure can't be changed without breaking the compatibility */
+typedef struct wmi_nlo_auth_param
+{
+    A_UINT32 valid;
+    A_UINT32 auth_type;
+} wmi_nlo_auth_param;
+
+/* NOTE: wmi_nlo_bcast_nw_param structure can't be changed without breaking the compatibility */
+typedef struct wmi_nlo_bcast_nw_param
+{
+    A_UINT32 valid;
+/* If WMI_NLO_CONFIG_EPNO is not set. Supplicant PNO is enabled. The value should be true/false
+Otherwise EPNO is enabled. bcast_nw_type would be used as a bit flag contains WMI_ENLO_FLAG_XXX */
+    A_UINT32 bcast_nw_type;
+} wmi_nlo_bcast_nw_param;
+
+/* NOTE: wmi_nlo_rssi_param structure can't be changed without breaking the compatibility */
+typedef struct wmi_nlo_rssi_param
+{
+    A_UINT32 valid;
+    A_INT32 rssi;
+} wmi_nlo_rssi_param;
+
+typedef struct nlo_configured_parameters {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_nlo_configured_parameters */
+    wmi_nlo_ssid_param ssid;
+    wmi_nlo_enc_param enc_type;
+    wmi_nlo_auth_param auth_type;
+    wmi_nlo_rssi_param rssi_cond;
+    wmi_nlo_bcast_nw_param bcast_nw_type; /* indicates if the SSID is hidden or not */
+} nlo_configured_parameters;
+
+
+/* Support channel prediction for PNO scan after scanning top_k_num channels
+ * if stationary_threshold is met.
+ */
+typedef struct nlo_channel_prediction_cfg {
+    A_UINT32 tlv_header;
+    /* Enable or disable this feature. */
+    A_UINT32 enable;
+    /* Top K channels will be scanned before deciding whether to further scan
+     * or stop. Minimum value is 3 and maximum is 5. */
+    A_UINT32 top_k_num;
+    /* Preconfigured stationary threshold.
+     * Lesser value means more conservative. Bigger value means more aggressive.
+     * Maximum is 100 and mininum is 0. */
+    A_UINT32 stationary_threshold;
+    /* Periodic full channel scan in milliseconds unit.
+     * After full_scan_period_ms since last full scan, channel prediction
+     * scan is suppressed and will do full scan.
+     * This is to help detecting sudden AP power-on or -off. Value 0 means no
+     * full scan at all (not recommended).
+     */
+    A_UINT32 full_scan_period_ms;
+} nlo_channel_prediction_cfg;
+
+typedef struct enlo_candidate_score_params_t {
+    A_UINT32 tlv_header;   /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_enlo_candidate_score_param */
+    A_INT32 min5GHz_rssi;  /* minimum 5GHz RSSI for a BSSID to be considered (units = dBm) */
+    A_INT32 min24GHz_rssi; /* minimum 2.4GHz RSSI for a BSSID to be considered (units = dBm) */
+    A_UINT32 initial_score_max; /* the maximum score that a network can have before bonuses */
+    /* current_connection_bonus:
+     * only report when there is a network's score this much higher
+     * than the current connection
+     */
+    A_UINT32 current_connection_bonus;
+    A_UINT32 same_network_bonus; /* score bonus for all networks with the same network flag */
+    A_UINT32 secure_bonus; /* score bonus for networks that are not open */
+    A_UINT32 band5GHz_bonus; /* 5GHz RSSI score bonus (applied to all 5GHz networks) */
+} enlo_candidate_score_params;
+
+typedef struct wmi_nlo_config {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nlo_config_cmd_fixed_param */
+    A_UINT32 flags;
+    A_UINT32 vdev_id;
+    A_UINT32 fast_scan_max_cycles;
+    A_UINT32 active_dwell_time;
+    A_UINT32 passive_dwell_time; /* PDT in msecs */
+    A_UINT32 probe_bundle_size;
+    A_UINT32 rest_time; /* ART = IRT */
+    A_UINT32 max_rest_time; /* Max value that can be reached after SBM */
+    A_UINT32 scan_backoff_multiplier; /* SBM */
+    A_UINT32 fast_scan_period; /* SCBM */
+    A_UINT32 slow_scan_period; /* specific to windows */
+    A_UINT32 no_of_ssids;
+    A_UINT32 num_of_channels;
+	A_UINT32 delay_start_time; /* NLO scan start delay time in milliseconds */
+/* The TLVs will follow.
+ * nlo_configured_parameters nlo_list[];
+ * A_UINT32 channel_list[];
+ * nlo_channel_prediction_cfg ch_prediction_cfg;
+ * enlo_candidate_score_params candidate_score_params;
+ */
+} wmi_nlo_config_cmd_fixed_param;
+
+typedef struct wmi_nlo_event
+{
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nlo_event */
+    A_UINT32 vdev_id;
+} wmi_nlo_event;
+
+
+/* WMI_PASSPOINT_CONFIG_SET
+ * Sets a list for passpoint networks for PNO purposes;
+ * it should be matched against any passpoint networks found
+ * during regular PNO scan.
+ */
+#define WMI_PASSPOINT_CONFIG_SET       (0x1 << 0)
+/* WMI_PASSPOINT_CONFIG_RESET
+ * Reset passpoint network list -
+ * no Passpoint networks should be matched after this.
+ */
+#define WMI_PASSPOINT_CONFIG_RESET     (0x1 << 1)
+
+#define PASSPOINT_REALM_LEN                  256
+#define PASSPOINT_ROAMING_CONSORTIUM_ID_LEN  5
+#define PASSPOINT_ROAMING_CONSORTIUM_ID_NUM  16
+#define PASSPOINT_PLMN_ID_LEN                3
+#define PASSPOINT_PLMN_ID_ALLOC_LEN /* round up to A_UINT32 boundary */ \
+    (((PASSPOINT_PLMN_ID_LEN + 3) >> 2) << 2)
+
+/*
+ * Confirm PASSPOINT_REALM_LEN is a multiple of 4, so the
+ *     A_UINT8 realm[PASSPOINT_REALM_LEN]
+ * array will end on a 4-byte boundary.
+ * (This 4-byte alignment simplifies endianness-correction byte swapping.)
+ */
+A_COMPILE_TIME_ASSERT(
+    check_passpoint_realm_size,
+    (PASSPOINT_REALM_LEN % sizeof(A_UINT32)) == 0);
+
+/*
+ * Confirm the product of PASSPOINT_ROAMING_CONSORTIUM_ID_NUM and
+ * PASSPOINT_ROAMING_CONSORTIUM_ID_LEN is a multiple of 4, so the
+ * roaming_consortium_ids array below will end on a 4-byte boundary.
+ * (This 4-byte alignment simplifies endianness-correction byte swapping.)
+ */
+A_COMPILE_TIME_ASSERT(
+    check_passpoint_roaming_consortium_ids_size,
+    ((PASSPOINT_ROAMING_CONSORTIUM_ID_NUM*PASSPOINT_ROAMING_CONSORTIUM_ID_LEN) % sizeof(A_UINT32)) == 0);
+
+/* wildcard ID to allow an action (reset) to apply to all networks */
+#define WMI_PASSPOINT_NETWORK_ID_WILDCARD 0xFFFFFFFF
+typedef struct wmi_passpoint_config {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_passpoint_config_cmd_fixed_param */
+    /* (network) id
+     * identifier of the matched network, report this in event
+     * This id can be a wildcard (WMI_PASSPOINT_NETWORK_ID_WILDCARD)
+     * that indicates the action should be applied to all networks.
+     * Currently, the only action that is applied to all networks is "reset".
+     * If a non-wildcard ID is specified, that particular network is configured.
+     * If a wildcard ID is specified, all networks are reset.
+     */
+    A_UINT32 id;
+    A_UINT32 req_id;
+    A_UINT8  realm[PASSPOINT_REALM_LEN]; /*null terminated UTF8 encoded realm, 0 if unspecified*/
+    A_UINT8  roaming_consortium_ids[PASSPOINT_ROAMING_CONSORTIUM_ID_NUM][PASSPOINT_ROAMING_CONSORTIUM_ID_LEN]; /*roaming consortium ids to match, 0s if unspecified*/
+                                                                                                              /*This would be bytes-stream as same as defition of realm id in 802.11 standard*/
+    A_UINT8  plmn[PASSPOINT_PLMN_ID_ALLOC_LEN]; /*PLMN id mcc/mnc combination as per rules, 0s if unspecified */
+} wmi_passpoint_config_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;    /* TLV tag and len; tag equals wmi_passpoint_event_hdr */
+    A_UINT32 id;            /* identifier of the matched network */
+    A_UINT32 vdev_id;
+    A_UINT32 timestamp;     /* time since boot (in microsecond) when the result was retrieved*/
+    wmi_ssid ssid;
+    wmi_mac_addr    bssid;  /* bssid of the network */
+    A_UINT32 channel_mhz;   /* channel frequency in MHz */
+    A_UINT32 rssi;          /* rssi value */
+    A_UINT32 rtt;           /* timestamp in nanoseconds*/
+    A_UINT32 rtt_sd;        /* standard deviation in rtt */
+    A_UINT32 beacon_period; /* beacon advertised in the beacon */
+    A_UINT32 capability;    /* capabilities advertised in the beacon */
+    A_UINT32 ie_length;     /* size of the ie_data blob */
+    A_UINT32 anqp_length;   /* length of ANQP blob */
+/* Following this structure is the byte stream of ie data of length ie_buf_len:
+ *  A_UINT8 ie_data[]; <-- length in byte given by field ie_length, blob of ie data in beacon
+ *  A_UINT8 anqp_ie[]; <-- length in byte given by field anqp_len, blob of anqp data of IE
+ *  Implicitly, combing ie_data and anqp_ie into a single bufp, and the bytes stream of each ie should be same as BEACON/Action-frm  by 802.11 spec.
+ */
+} wmi_passpoint_event_hdr;
+
+
+#define GTK_OFFLOAD_OPCODE_MASK             0xFF000000
+/** Enable GTK offload, and provided parameters KEK,KCK and replay counter values */
+#define GTK_OFFLOAD_ENABLE_OPCODE           0x01000000
+/** Disable GTK offload */
+#define GTK_OFFLOAD_DISABLE_OPCODE          0x02000000
+/** Read GTK offload parameters, generates WMI_GTK_OFFLOAD_STATUS_EVENT */
+#define GTK_OFFLOAD_REQUEST_STATUS_OPCODE   0x04000000
+enum wmi_chatter_mode {
+    /* Chatter enter/exit happens
+     * automatically based on preset
+     * params
+     */
+    WMI_CHATTER_MODE_AUTO,
+    /* Chatter enter is triggered
+     * manually by the user
+     */
+    WMI_CHATTER_MODE_MANUAL_ENTER,
+    /* Chatter exit is triggered
+     * manually by the user
+     */
+    WMI_CHATTER_MODE_MANUAL_EXIT,
+    /* Placeholder max value, always last*/
+    WMI_CHATTER_MODE_MAX
+};
+
+enum wmi_chatter_query_type {
+    /*query coalescing filter match counter*/
+    WMI_CHATTER_QUERY_FILTER_MATCH_CNT,
+    WMI_CHATTER_QUERY_MAX
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_set_mode_cmd_fixed_param  */
+    A_UINT32 chatter_mode;
+} wmi_chatter_set_mode_cmd_fixed_param;
+
+/** maximum number of filter supported*/
+#define CHATTER_MAX_COALESCING_RULES     11
+/** maximum number of field tests per filter*/
+#define CHATTER_MAX_FIELD_TEST           5
+/** maximum field length in number of DWORDS*/
+#define CHATTER_MAX_TEST_FIELD_LEN32     2
+
+/** field test kinds*/
+#define CHATTER_COALESCING_TEST_EQUAL            1
+#define CHATTER_COALESCING_TEST_MASKED_EQUAL     2
+#define CHATTER_COALESCING_TEST_NOT_EQUAL        3
+
+/** packet type*/
+#define CHATTER_COALESCING_PKT_TYPE_UNICAST      (1 << 0)
+#define CHATTER_COALESCING_PKT_TYPE_MULTICAST    (1 << 1)
+#define CHATTER_COALESCING_PKT_TYPE_BROADCAST    (1 << 2)
+
+/** coalescing field test*/
+typedef struct _chatter_pkt_coalescing_hdr_test {
+    /** offset from start of mac header, for windows native wifi host driver
+     * should assume standard 802.11 frame format without QoS info and address4
+     * FW would account for any non-stand fields for final offset value.
+     */
+    A_UINT32 offset;
+    A_UINT32 length; /* length of test field*/
+    A_UINT32 test; /*equal, not equal or masked equal*/
+    A_UINT32 mask[CHATTER_MAX_TEST_FIELD_LEN32]; /*mask byte stream*/
+    A_UINT32 value[CHATTER_MAX_TEST_FIELD_LEN32]; /*value byte stream*/
+} chatter_pkt_coalescing_hdr_test;
+
+/** packet coalescing filter*/
+typedef struct _chatter_pkt_coalescing_filter {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_pkt_coalescing_filter */
+    A_UINT32 filter_id; /*unique id assigned by OS*/
+    A_UINT32 max_coalescing_delay; /*max miliseconds 1st pkt can be hold*/
+    A_UINT32 pkt_type; /*unicast/multicast/broadcast*/
+    A_UINT32 num_of_test_field; /*number of field test in table*/
+    chatter_pkt_coalescing_hdr_test test_fields[CHATTER_MAX_FIELD_TEST]; /*field test tbl*/
+} chatter_pkt_coalescing_filter;
+
+/** packet coalescing filter add command*/
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_coalescing_add_filter_cmd_fixed_param */
+    A_UINT32 num_of_filters;
+/* Following this tlv, there comes an array of structure of type chatter_pkt_coalescing_filter
+ chatter_pkt_coalescing_filter rx_filter[1];*/
+} wmi_chatter_coalescing_add_filter_cmd_fixed_param;
+/** packet coalescing filter delete command*/
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_coalescing_delete_filter_cmd_fixed_param */
+    A_UINT32 filter_id; /*filter id which will be deleted*/
+} wmi_chatter_coalescing_delete_filter_cmd_fixed_param;
+/** packet coalescing query command*/
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_coalescing_query_cmd_fixed_param */
+    A_UINT32 type; /*type of query*/
+} wmi_chatter_coalescing_query_cmd_fixed_param;
+/** chatter query reply event*/
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_query_reply_event_fixed_param  */
+    A_UINT32 type; /*query type*/
+    A_UINT32 filter_match_cnt; /*coalescing filter match counter*/
+} wmi_chatter_query_reply_event_fixed_param;
+
+/* NOTE: This constants GTK_OFFLOAD_KEK_BYTES, GTK_OFFLOAD_KCK_BYTES, and GTK_REPLAY_COUNTER_BYTES
+ * cannot be changed without breaking WMI compatibility. */
+#define GTK_OFFLOAD_KEK_BYTES       16
+#define GTK_OFFLOAD_KCK_BYTES       16
+/* NOTE: GTK_REPLAY_COUNTER_BYTES, WMI_MAX_KEY_LEN, IGTK_PN_SIZE cannot be changed in the future without breaking WMI compatibility */
+#define GTK_REPLAY_COUNTER_BYTES    8
+#define WMI_MAX_KEY_LEN             32
+#define IGTK_PN_SIZE                6
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param */
+    A_UINT32 vdev_id; /** unique id identifying the VDEV */
+    A_UINT32 flags; /* status flags */
+    A_UINT32 refresh_cnt; /* number of successful GTK refresh exchanges since last SET operation */
+    A_UINT8 replay_counter[GTK_REPLAY_COUNTER_BYTES]; /* current replay counter */
+    A_UINT8 igtk_keyIndex; /* Use if IGTK_OFFLOAD is defined */
+    A_UINT8 igtk_keyLength; /* Use if IGTK_OFFLOAD is defined */
+    A_UINT8 igtk_keyRSC[IGTK_PN_SIZE]; /* key replay sequence counter *//* Use if IGTK_OFFLOAD is defined */
+    A_UINT8 igtk_key[WMI_MAX_KEY_LEN]; /* Use if IGTK_OFFLOAD is defined */
+} WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_CMD_fixed_param */
+    A_UINT32 vdev_id; /** unique id identifying the VDEV */
+    A_UINT32 flags; /* control flags, GTK offload command use high byte  */
+    /* The size of following 3 arrays cannot be changed without breaking WMI compatibility. */
+    A_UINT8 KEK[GTK_OFFLOAD_KEK_BYTES]; /* key encryption key */
+    A_UINT8 KCK[GTK_OFFLOAD_KCK_BYTES]; /* key confirmation key */
+    A_UINT8 replay_counter[GTK_REPLAY_COUNTER_BYTES]; /* replay counter for re-key */
+} WMI_GTK_OFFLOAD_CMD_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_PMF_OFFLOAD_SET_SA_QUERY_CMD_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 sa_query_retry_interval;  /* in msec */
+    A_UINT32 sa_query_max_retry_count;
+} WMI_PMF_OFFLOAD_SET_SA_QUERY_CMD_fixed_param;
+
+typedef enum {
+    WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, /* 802.11 NULL frame */
+    WMI_STA_KEEPALIVE_METHOD_UNSOLICITED_ARP_RESPONSE = 2, /* ARP response */
+    WMI_STA_KEEPALIVE_METHOD_ETHERNET_LOOPBACK = 3, /*ETHERNET LOOPBACK*/
+    WMI_STA_KEEPALIVE_METHOD_GRATUITOUS_ARP_REQUEST = 4, /* gratuitous ARP req*/
+} WMI_STA_KEEPALIVE_METHOD;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_STA_KEEPALVE_ARP_RESPONSE */
+    WMI_IPV4_ADDR sender_prot_addr; /* Sender protocol address */
+    WMI_IPV4_ADDR target_prot_addr; /* Target protocol address */
+    wmi_mac_addr dest_mac_addr; /* destination MAC address */
+} WMI_STA_KEEPALVE_ARP_RESPONSE;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_STA_KEEPALIVE_CMD_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 enable; /* 1 - Enable, 0 - disable */
+    A_UINT32 method; /* keep alive method */
+    A_UINT32 interval; /* time interval in seconds  */
+/*
+ * NOTE: following this structure is the TLV for ARP Resonse:
+ *     WMI_STA_KEEPALVE_ARP_RESPONSE arp_resp; <-- ARP response
+ */
+} WMI_STA_KEEPALIVE_CMD_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 action;
+} WMI_VDEV_WNM_SLEEPMODE_CMD_fixed_param;
+typedef WMI_VDEV_WNM_SLEEPMODE_CMD_fixed_param WMI_STA_WNMSLEEP_CMD;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_keepalive_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 keepaliveInterval; /* seconds */
+    A_UINT32 keepaliveMethod;
+} wmi_vdev_set_keepalive_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_cmd_fixed_param */
+    A_UINT32 vdev_id;
+} wmi_vdev_get_keepalive_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_event_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 keepaliveInterval; /* seconds */
+    A_UINT32 keepaliveMethod; /* seconds */
+} wmi_vdev_get_keepalive_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+#define IPSEC_NATKEEPALIVE_FILTER_DISABLE 0
+#define IPSEC_NATKEEPALIVE_FILTER_ENABLE 1
+    A_UINT32 action;
+} WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param;
+typedef WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 mcc_tbttmode;
+    wmi_mac_addr mcc_bssid;
+} wmi_vdev_mcc_set_tbtt_mode_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;        /* home vdev id */
+    A_UINT32 meas_token;     /* from measure request frame */
+    A_UINT32 dialog_token;
+    A_UINT32 number_bursts;  /* zero keep sending until cancel, bigger than 0 means times e.g. 1,2 */
+    A_UINT32 burst_interval; /* unit in mill seconds, interval between consecutive burst*/
+    A_UINT32 burst_cycle;   /* times cycle through within one burst */
+    A_UINT32 tx_power;      /* for path frame */
+    A_UINT32 off_duration;  /* uint in mill seconds, channel off duraiton for path loss frame sending */
+    wmi_mac_addr dest_mac; /* multicast DA, for path loss frame */
+    A_UINT32 num_chans;
+} wmi_vdev_plmreq_start_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 meas_token; /* same value from req*/
+} wmi_vdev_plmreq_stop_cmd_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_set_noa_cmd_fixed_param  */
+    A_UINT32 tlv_header;
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* enable/disable NoA */
+    A_UINT32 enable;
+    /** number of NoA desc. In the TLV noa_descriptor[] */
+    A_UINT32 num_noa;
+    /**
+     * TLV (tag length value)  paramerters follow the pattern structure.
+     * TLV  contain NoA desc with num of num_noa
+     */
+} wmi_p2p_set_noa_cmd_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_unit_test_cmd_fixed_param  */
+    A_UINT32 tlv_header;
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* Identify the wlan module */
+    A_UINT32 module_id;
+    /* Num of test arguments passed */
+    A_UINT32 num_args;
+/**
+ * TLV (tag length value) parameters follow the wmi_roam_chan_list
+ * structure. The TLV's are:
+ *	 A_UINT32 args[];
+ **/
+} wmi_unit_test_cmd_fixed_param;
+
+/** Roaming offload SYNCH_COMPLETE from host when host finished sync logic
+ * after it received WMI_ROAM_SYNCH_EVENTID.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_synch_complete_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+} wmi_roam_synch_complete_fixed_param;
+
+
+typedef enum {
+    RECOVERY_SIM_ASSERT = 0x01,
+    RECOVERY_SIM_NO_DETECT = 0x02,
+    RECOVERY_SIM_CTR_EP_FULL = 0x03,
+    RECOVERY_SIM_EMPTY_POINT = 0x04,
+    RECOVERY_SIM_STACK_OV = 0x05,
+    RECOVERY_SIM_INFINITE_LOOP = 0x06,
+    RECOVERY_SIM_PCIE_LINKDOWN = 0x07,
+    RECOVERY_SIM_SELF_RECOVERY = 0x08,
+} RECOVERY_SIM_TYPE;
+
+/* WMI_FORCE_FW_HANG_CMDID */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_FORCE_FW_HANG_CMD_fixed_param */
+    A_UINT32 type; /*0:unused 1: ASSERT, 2: not respond detect command,3:  simulate ep-full(),4:...*/
+    A_UINT32 delay_time_ms; /*0xffffffff means the simulate will delay for random time (0 ~0xffffffff ms)*/
+} WMI_FORCE_FW_HANG_CMD_fixed_param;
+
+typedef enum {
+    WMI_MCAST_FILTER_SET = 1,
+    WMI_MCAST_FILTER_DELETE
+} WMI_SET_SINGLE_MCAST_FILTER_OP;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 index;
+    A_UINT32 action;
+    wmi_mac_addr mcastbdcastaddr;
+} WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param;
+
+typedef enum {
+    WMI_MULTIPLE_MCAST_FILTER_CLEAR = 1, /* clear all previous mc list */
+    WMI_MULTIPLE_MCAST_FILTER_SET,       /* clear all previous mc list, and set new list */
+    WMI_MULTIPLE_MCAST_FILTER_DELETE,    /* delete one/multiple mc list */
+    WMI_MULTIPLE_MCAST_FILTER_ADD        /* add one/multiple mc list */
+} WMI_MULTIPLE_MCAST_FILTER_OP;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 operation;  /* refer WMI_MULTIPLE_MCAST_FILTER_OP */
+    A_UINT32 num_mcastaddrs; /* number of elements in the subsequent mcast addr list */
+/**
+ * TLV (tag length value) parameters follow the
+ * structure. The TLV's are:
+ * wmi_mac_addr mcastaddr_list[num_mcastaddrs];
+ */
+} WMI_SET_MULTIPLE_MCAST_FILTER_CMD_fixed_param;
+
+
+/* WMI_DBGLOG_TIME_STAMP_SYNC_CMDID */
+typedef enum {
+    WMI_TIME_STAMP_SYNC_MODE_MS, /* millisecond units */
+    WMI_TIME_STAMP_SYNC_MODE_US, /* microsecond units */
+} WMI_TIME_STAMP_SYNC_MODE;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_dbglog_time_stamp_sync_cmd_fixed_param */
+    A_UINT32 mode; /* 0: millisec, 1: microsec (see WMI_TIME_STAMP_SYNC_MODE) */
+    A_UINT32 time_stamp_low; /* lower 32 bits of remote time stamp */
+    A_UINT32 time_stamp_high; /* higher 32 bits of remote time stamp */
+} WMI_DBGLOG_TIME_STAMP_SYNC_CMD_fixed_param;
+
+/* GPIO Command and Event data structures */
+
+/* WMI_GPIO_CONFIG_CMDID */
+enum {
+    WMI_GPIO_PULL_NONE,
+    WMI_GPIO_PULL_UP,
+    WMI_GPIO_PULL_DOWN,
+};
+
+enum {
+    WMI_GPIO_INTTYPE_DISABLE,
+    WMI_GPIO_INTTYPE_RISING_EDGE,
+    WMI_GPIO_INTTYPE_FALLING_EDGE,
+    WMI_GPIO_INTTYPE_BOTH_EDGE,
+    WMI_GPIO_INTTYPE_LEVEL_LOW,
+    WMI_GPIO_INTTYPE_LEVEL_HIGH
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gpio_config_cmd_fixed_param */
+    A_UINT32 gpio_num; /* GPIO number to be setup */
+    A_UINT32 input; /* 0 - Output/ 1 - Input */
+    A_UINT32 pull_type; /* Pull type defined above */
+    A_UINT32 intr_mode; /* Interrupt mode defined above (Input) */
+} wmi_gpio_config_cmd_fixed_param;
+
+/* WMI_GPIO_OUTPUT_CMDID */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gpio_output_cmd_fixed_param */
+    A_UINT32 gpio_num; /* GPIO number to be setup */
+    A_UINT32 set; /* Set the GPIO pin*/
+} wmi_gpio_output_cmd_fixed_param;
+
+/* WMI_GPIO_INPUT_EVENTID */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gpio_input_event_fixed_param */
+    A_UINT32 gpio_num; /* GPIO number which changed state */
+} wmi_gpio_input_event_fixed_param;
+
+/* WMI_P2P_DISC_EVENTID */
+enum {
+    P2P_DISC_SEARCH_PROB_REQ_HIT = 0, /* prob req hit the p2p find pattern */
+    P2P_DISC_SEARCH_PROB_RESP_HIT, /* prob resp hit the p2p find pattern */
+};
+
+enum {
+    P2P_DISC_MODE_SEARCH = 0, /* do search when p2p find offload*/
+    P2P_DISC_MODE_LISTEN, /* do listen when p2p find offload*/
+    P2P_DISC_MODE_AUTO, /* do listen and search when p2p find offload*/
+};
+
+enum {
+    P2P_DISC_PATTERN_TYPE_BSSID = 0, /* BSSID pattern */
+    P2P_DISC_PATTERN_TYPE_DEV_NAME, /* device name pattern */
+};
+
+typedef struct {
+    A_UINT32 vdev_id;
+    A_UINT32 reason; /* P2P DISC wake up reason*/
+} wmi_p2p_disc_event;
+
+typedef WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param WOW_EVENT_INFO_SECTION_GTKIGTK;
+
+typedef enum {
+    WMI_FAKE_TXBFER_SEND_NDPA,
+    WMI_FAKE_TXBFER_SEND_MU,
+    WMI_FAKE_TXBFER_NDPA_FBTYPE,
+    WMI_FAKE_TXBFER_NDPA_NCIDX,
+    WMI_FAKE_TXBFER_NDPA_POLL,
+    WMI_FAKE_TXBFER_NDPA_BW,
+    WMI_FAKE_TXBFER_NDPA_PREAMBLE,
+    WMI_FAKE_TXBFER_NDPA_RATE,
+    WMI_FAKE_TXBFER_NDP_BW,
+    WMI_FAKE_TXBFER_NDP_NSS,
+    WMI_TXBFEE_ENABLE_UPLOAD_H,
+    WMI_TXBFEE_ENABLE_CAPTURE_H,
+    WMI_TXBFEE_SET_CBF_TBL,
+    WMI_TXBFEE_CBF_TBL_LSIG,
+    WMI_TXBFEE_CBF_TBL_SIGA1,
+    WMI_TXBFEE_CBF_TBL_SIGA2,
+    WMI_TXBFEE_CBF_TBL_SIGB,
+    WMI_TXBFEE_CBF_TBL_PAD,
+    WMI_TXBFEE_CBF_TBL_DUR,
+    WMI_TXBFEE_SU_NCIDX,
+    WMI_TXBFEE_CBIDX,
+    WMI_TXBFEE_NGIDX,
+} WMI_TXBF_PARAM_ID;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_txbf_cmd_fixed_param */
+    /** parameter id   */
+    A_UINT32 param_id;
+    /** parameter value */
+    A_UINT32 param_value;
+} wmi_txbf_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_upload_h_hdr */
+    A_UINT32 h_length;
+    A_UINT32 cv_length;
+/* This TLV is followed by array of bytes:
+ *   A_UINT8 bufp[]; <-- h_cv info buffer
+ */
+} wmi_upload_h_hdr;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_capture_h_event_hdr */
+    A_UINT32 svd_num;
+    A_UINT32 tone_num;
+    A_UINT32 reserved;
+} wmi_capture_h_event_hdr;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_avoid_freq_range_desc */
+    A_UINT32 start_freq; /* start frequency, not channel center freq */
+    A_UINT32 end_freq; /* end frequency */
+} wmi_avoid_freq_range_desc;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_avoid_freq_ranges_event_fixed_param */
+    /* bad channel range count, multi range is allowed, 0 means all channel clear */
+    A_UINT32 num_freq_ranges;
+
+/* The TLVs will follow.
+ * multi range with num_freq_ranges, LTE advance multi carrier, CDMA,etc
+ *     wmi_avoid_freq_range_desc avd_freq_range[]; <-- message buffer, NULL terminated
+ */
+} wmi_avoid_freq_ranges_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gtk_rekey_fail_event_fixed_param  */
+    /** Reserved for future use */
+    A_UINT32 reserved0;
+    A_UINT32 vdev_id;
+} wmi_gtk_rekey_fail_event_fixed_param;
+
+enum wmm_ac_downgrade_policy {
+    WMM_AC_DOWNGRADE_DEPRIO,
+    WMM_AC_DOWNGRADE_DROP,
+    WMM_AC_DOWNGRADE_INVALID,
+};
+
+/* WMM EDCA Params type */
+#define WMM_PARAM_TYPE_LEGACY        0
+/* Relaxed EDCA parameters for 11ax to be used in case of triggered access */
+#define WMM_PARAM_TYPE_11AX_EDCA     1
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 cwmin;
+    A_UINT32 cwmax;
+    A_UINT32 aifs;
+    A_UINT32 txoplimit;
+    A_UINT32 acm;
+    A_UINT32 no_ack;
+} wmi_wmm_vparams;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    wmi_wmm_vparams wmm_params[4]; /* 0 be, 1 bk, 2 vi, 3 vo */
+    A_UINT32 wmm_param_type; /* see WMM_PARAM_TYPE_xxx defs */
+} wmi_vdev_set_wmm_params_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32              gtxRTMask[2]; /* for HT and VHT rate masks */
+    A_UINT32              userGtxMask; /* host request for GTX mask */
+    A_UINT32              gtxPERThreshold; /* default: 10% */
+    A_UINT32              gtxPERMargin; /* default: 2% */
+    A_UINT32              gtxTPCstep; /* default: 1 */
+    A_UINT32              gtxTPCMin; /* default: 5 */
+    A_UINT32              gtxBWMask; /* 20/40/80/160 Mhz */
+} wmi_vdev_set_gtx_params_cmd_fixed_param;
+
+typedef struct
+{
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 ac;
+    A_UINT32 medium_time_us; /* per second unit, the Admitted time granted, unit in micro seconds */
+    A_UINT32 downgrade_type;
+} wmi_vdev_wmm_addts_cmd_fixed_param;
+
+typedef struct
+{
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 ac;
+} wmi_vdev_wmm_delts_cmd_fixed_param;
+
+/* DEPRECATED */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_dfs_enable_cmd_fixed_param  */
+    /** Reserved for future use */
+    A_UINT32 reserved0;
+} wmi_pdev_dfs_enable_cmd_fixed_param;
+
+/* DEPRECATED */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_dfs_disable_cmd_fixed_param  */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_dfs_disable_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_ena_cmd_fixed_param
+     */
+    A_UINT32 tlv_header;
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_dfs_phyerr_filter_ena_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_dis_cmd_fixed_param
+     */
+    A_UINT32 tlv_header;
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_dfs_phyerr_filter_dis_cmd_fixed_param;
+
+/** TDLS COMMANDS */
+
+/* WMI_TDLS_SET_STATE_CMDID */
+/* TDLS State */
+enum wmi_tdls_state {
+    /** TDLS disable */
+    WMI_TDLS_DISABLE,
+    /** TDLS enabled - no firmware connection tracking/notifications */
+    WMI_TDLS_ENABLE_PASSIVE,
+    /** TDLS enabled - with firmware connection tracking/notifications */
+    WMI_TDLS_ENABLE_ACTIVE,
+    /** TDLS enabled - firmware waits for peer mac for connection tracking */
+    WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
+    /** TDLS enabled - TDLS connection tracking is done in host */
+    WMI_TDLS_ENABLE_CONNECTION_TRACKER_IN_HOST,
+};
+
+/* TDLS Options */
+#define WMI_TDLS_OFFCHAN_EN             (1 << 0) /** TDLS Off Channel support */
+#define WMI_TDLS_BUFFER_STA_EN          (1 << 1) /** TDLS Buffer STA support */
+#define WMI_TDLS_SLEEP_STA_EN           (1 << 2) /** TDLS Sleep STA support (not currently supported) */
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_set_state_cmd_fixed_param  */
+    A_UINT32 tlv_header;
+    /** unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** Enable/Disable TDLS (wmi_tdls_state) */
+    A_UINT32 state;
+    /** Duration (in ms) over which to calculate tx/rx threshold to trigger TDLS Discovery */
+    A_UINT32 notification_interval_ms;
+    /** number of packets OVER which notify/suggest TDLS Discovery:
+     *  if current tx pps counter / notification interval >= threshold
+     *  then a notification will be sent to host to advise TDLS Discovery */
+    A_UINT32 tx_discovery_threshold;
+    /** number of packets UNDER which notify/suggest TDLS Teardown:
+     *  if current tx pps counter / notification interval < threshold
+     *  then a notification will be sent to host to advise TDLS Tear down */
+    A_UINT32 tx_teardown_threshold;
+    /** Absolute RSSI value under which notify/suggest TDLS Teardown */
+    A_INT32 rssi_teardown_threshold;
+    /** Peer RSSI < (AP RSSI + delta) will trigger a teardown */
+    A_INT32 rssi_delta;
+    /** TDLS Option Control
+     * Off-Channel, Buffer STA, (later)Sleep STA support */
+    A_UINT32 tdls_options;
+    /* Buffering time in number of beacon intervals */
+    A_UINT32 tdls_peer_traffic_ind_window;
+    /* Wait time for PTR frame */
+    A_UINT32 tdls_peer_traffic_response_timeout_ms;
+    /* Self PUAPSD mask */
+    A_UINT32 tdls_puapsd_mask;
+    /* Inactivity timeout */
+    A_UINT32 tdls_puapsd_inactivity_time_ms;
+    /* Max of rx frame during SP */
+    A_UINT32 tdls_puapsd_rx_frame_threshold;
+    /**Duration (in ms) over which to check whether TDLS link needs to be torn down */
+    A_UINT32 teardown_notification_ms;
+    /**STA kickout threshold for TDLS peer */
+    A_UINT32 tdls_peer_kickout_threshold;
+} wmi_tdls_set_state_cmd_fixed_param;
+
+/* WMI_TDLS_PEER_UPDATE_CMDID */
+
+enum wmi_tdls_peer_state {
+    /** tx peer TDLS link setup now starting, traffic to DA should be
+     * paused (except TDLS frames) until state is moved to CONNECTED (or
+     * TEARDOWN on setup failure) */
+    WMI_TDLS_PEER_STATE_PEERING,
+    /** tx peer TDLS link established, running (all traffic to DA unpaused) */
+    WMI_TDLS_PEER_STATE_CONNECTED,
+    /** tx peer TDLS link tear down started (link paused, any frames
+     * queued for DA will be requeued back through the AP)*/
+    WMI_TDLS_PEER_STATE_TEARDOWN,
+    /** Add peer mac into connection table */
+    WMI_TDLS_PEER_ADD_MAC_ADDR,
+    /** Remove peer mac from connection table */
+    WMI_TDLS_PEER_REMOVE_MAC_ADDR,
+};
+
+/* NB: These defines are fixed, and cannot be changed without breaking WMI compatibility */
+#define WMI_TDLS_MAX_SUPP_CHANNELS 128
+#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_peer_capabilities  */
+    A_UINT32 tlv_header;
+    /* Peer's QoS Info - for U-APSD */
+    /* AC FLAGS  - accessed through macros below */
+    /* Ack, SP, More Data Ack - accessed through macros below */
+    A_UINT32 peer_qos;
+    /*TDLS Peer's U-APSD Buffer STA Support*/
+    A_UINT32 buff_sta_support;
+    /*TDLS off channel related params */
+    A_UINT32 off_chan_support;
+    A_UINT32 peer_curr_operclass;
+    A_UINT32 self_curr_operclass;
+    /* Number of channels available for off channel operation */
+    A_UINT32 peer_chan_len;
+    A_UINT32 peer_operclass_len;
+    A_UINT8  peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
+    /* Is peer initiator or responder of TDLS setup request */
+    A_UINT32 is_peer_responder;
+    /* Preferred off channel number as configured by user */
+    A_UINT32 pref_offchan_num;
+    /* Preferred off channel bandwidth as configured by user */
+    A_UINT32 pref_offchan_bw;
+
+    /** Followed by the variable length TLV peer_chan_list:
+     *  wmi_channel peer_chan_list[].
+      *   Array size would be peer_chan_len.
+     *  This array is intersected channels which is supported by both peer
+     *  and DUT. freq1 in chan_info shall be same as mhz, freq2 shall be 0.
+     *  FW shall compute BW for an offchan based on peer's ht/vht cap
+     *  received in peer_assoc cmd during change STA operation
+      */
+ } wmi_tdls_peer_capabilities;
+
+#define WMI_TDLS_QOS_VO_FLAG           0
+#define WMI_TDLS_QOS_VI_FLAG           1
+#define WMI_TDLS_QOS_BK_FLAG           2
+#define WMI_TDLS_QOS_BE_FLAG           3
+#define WMI_TDLS_QOS_ACK_FLAG          4
+#define WMI_TDLS_QOS_SP_FLAG           5
+#define WMI_TDLS_QOS_MOREDATA_FLAG     7
+
+#define WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps,flag) do { \
+        (ppeer_caps)->peer_qos |=  (1 << flag);      \
+     } while (0)
+#define WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps,flag)   \
+        (((ppeer_caps)->peer_qos & (1 << flag)) >> flag)
+
+#define WMI_SET_TDLS_PEER_VO_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VO_FLAG)
+#define WMI_GET_TDLS_PEER_VO_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VO_FLAG)
+#define WMI_SET_TDLS_PEER_VI_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VI_FLAG)
+#define WMI_GET_TDLS_PEER_VI_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VI_FLAG)
+#define WMI_SET_TDLS_PEER_BK_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BK_FLAG)
+#define WMI_GET_TDLS_PEER_BK_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BK_FLAG)
+#define WMI_SET_TDLS_PEER_BE_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BE_FLAG)
+#define WMI_GET_TDLS_PEER_BE_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BE_FLAG)
+#define WMI_SET_TDLS_PEER_ACK_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_ACK_FLAG)
+#define WMI_GET_TDLS_PEER_ACK_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_ACK_FLAG)
+/* SP has 2 bits */
+#define WMI_SET_TDLS_PEER_SP_UAPSD(ppeer_caps,val) do { \
+     (ppeer_caps)->peer_qos |=  (((val) & 0x3) << WMI_TDLS_QOS_SP_FLAG); \
+     } while (0)
+#define WMI_GET_TDLS_PEER_SP_UAPSD(ppeer_caps) \
+    (((ppeer_caps)->peer_qos & (0x3 << WMI_TDLS_QOS_SP_FLAG)) >> WMI_TDLS_QOS_SP_FLAG)
+
+#define WMI_SET_TDLS_PEER_MORE_DATA_ACK_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_MOREDATA_FLAG)
+#define WMI_GET_TDLS_PEER_MORE_DATA_ACK_UAPSD(ppeer_caps) \
+    WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_MOREDATA_FLAG)
+
+
+#define WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd,flag) do { \
+        (pset_cmd)->tdls_puapsd_mask |=  (1 << flag);      \
+     } while (0)
+#define WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd,flag)   \
+        (((pset_cmd)->tdls_puapsd_mask & (1 << flag)) >> flag)
+
+#define WMI_SET_TDLS_SELF_VO_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VO_FLAG)
+#define WMI_GET_TDLS_SELF_VO_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VO_FLAG)
+#define WMI_SET_TDLS_SELF_VI_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VI_FLAG)
+#define WMI_GET_TDLS_SELF_VI_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VI_FLAG)
+#define WMI_SET_TDLS_SELF_BK_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BK_FLAG)
+#define WMI_GET_TDLS_SELF__BK_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BK_FLAG)
+#define WMI_SET_TDLS_SELF_BE_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BE_FLAG)
+#define WMI_GET_TDLS_SELF_BE_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BE_FLAG)
+#define WMI_SET_TDLS_SELF_ACK_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_ACK_FLAG)
+#define WMI_GET_TDLS_SELF_ACK_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_ACK_FLAG)
+/* SP has 2 bits */
+#define WMI_SET_TDLS_SELF_SP_UAPSD(pset_cmd,val) do { \
+     (pset_cmd)->tdls_puapsd_mask |=  (((val) & 0x3) << WMI_TDLS_QOS_SP_FLAG); \
+     } while (0)
+#define WMI_GET_TDLS_SELF_SP_UAPSD(pset_cmd) \
+    (((pset_cmd)->tdls_puapsd_mask & (0x3 << WMI_TDLS_QOS_SP_FLAG)) >> WMI_TDLS_QOS_SP_FLAG)
+
+#define WMI_SET_TDLS_SELF_MORE_DATA_ACK_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_MOREDATA_FLAG)
+#define WMI_GET_TDLS_SELF_MORE_DATA_ACK_UAPSD(pset_cmd) \
+    WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_MOREDATA_FLAG)
+
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_peer_update_cmd_fixed_param  */
+    A_UINT32    tlv_header;
+    /** unique id identifying the VDEV */
+    A_UINT32                    vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr                peer_macaddr;
+    /** new TDLS state for peer (wmi_tdls_peer_state) */
+    A_UINT32                    peer_state;
+    /* The TLV for wmi_tdls_peer_capabilities will follow.
+     *     wmi_tdls_peer_capabilities  peer_caps;
+     */
+    /** Followed by the variable length TLV chan_info:
+     *  wmi_channel chan_info[] */
+} wmi_tdls_peer_update_cmd_fixed_param;
+
+/* WMI_TDLS_SET_OFFCHAN_MODE_CMDID */
+
+
+/* bitmap  20, 40, 80 or 160 MHz wide channel */
+#define WMI_TDLS_OFFCHAN_20MHZ                  0x1   /*  20 MHz wide channel */
+#define WMI_TDLS_OFFCHAN_40MHZ                  0x2   /*  40 MHz wide channel */
+#define WMI_TDLS_OFFCHAN_80MHZ                  0x4   /*  80 MHz wide channel */
+#define WMI_TDLS_OFFCHAN_160MHZ                 0x8   /*  160 MHz wide channel */
+
+
+enum wmi_tdls_offchan_mode {
+    WMI_TDLS_ENABLE_OFFCHANNEL,
+    WMI_TDLS_DISABLE_OFFCHANNEL
+};
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_set_offchan_mode_cmd_fixed_param  */
+    A_UINT32   tlv_header;
+    /** unique id identifying the VDEV */
+    A_UINT32   vdev_id;
+    /** Enable/Disable TDLS offchannel */
+    A_UINT32 offchan_mode;
+    /** peer MAC address */
+    wmi_mac_addr   peer_macaddr;
+   /* Is peer initiator or responder of TDLS setup request */
+    A_UINT32 is_peer_responder;
+    /* off channel number*/
+    A_UINT32 offchan_num;
+    /* off channel bandwidth bitmap, e.g. WMI_OFFCHAN_20MHZ */
+    A_UINT32 offchan_bw_bitmap;
+   /* operating class for offchan */
+   A_UINT32 offchan_oper_class;
+} wmi_tdls_set_offchan_mode_cmd_fixed_param;
+
+
+/** TDLS EVENTS */
+enum wmi_tdls_peer_notification {
+    /** tdls discovery recommended for peer (based
+     * on tx bytes per second > tx_discover threshold) */
+    WMI_TDLS_SHOULD_DISCOVER,
+    /** tdls link tear down recommended for peer
+     * due to tx bytes per second below tx_teardown_threshold
+     * NB: this notification sent once */
+    WMI_TDLS_SHOULD_TEARDOWN,
+    /** tx peer TDLS link tear down complete */
+    WMI_TDLS_PEER_DISCONNECTED,
+    /** TDLS/BT role change notification for connection tracker */
+    WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
+};
+
+enum wmi_tdls_peer_reason {
+    /** tdls teardown recommended due to low transmits */
+    WMI_TDLS_TEARDOWN_REASON_TX,
+    /** tdls link tear down recommended due to poor RSSI */
+    WMI_TDLS_TEARDOWN_REASON_RSSI,
+    /** tdls link tear down recommended due to offchannel scan */
+    WMI_TDLS_TEARDOWN_REASON_SCAN,
+    /** tdls peer disconnected due to peer deletion */
+    WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
+    /** tdls peer disconnected due to PTR timeout */
+    WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
+    /** tdls peer disconnected due wrong PTR format */
+    WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
+    /** tdls peer not responding */
+    WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
+    /** tdls entered buffer STA role, TDLS connection tracker needs to handle this */
+    WMI_TDLS_ENTER_BUF_STA,
+    /** tdls exited buffer STA role, TDLS connection tracker needs to handle this */
+    WMI_TDLS_EXIT_BUF_STA,
+    /** BT entered busy mode, TDLS connection tracker needs to handle this */
+    WMI_TDLS_ENTER_BT_BUSY_MODE,
+    /** BT exited busy mode, TDLS connection tracker needs to handle this */
+    WMI_TDLS_EXIT_BT_BUSY_MODE,
+    /** TDLS module received a scan start event, TDLS connection tracker needs to handle this */
+    WMI_TDLS_SCAN_STARTED_EVENT,
+    /** TDLS module received a scan complete event, TDLS connection tracker needs to handle this */
+    WMI_TDLS_SCAN_COMPLETED_EVENT,
+};
+
+/* WMI_TDLS_PEER_EVENTID */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_peer_event_fixed_param  */
+    A_UINT32    tlv_header;
+    /** peer MAC address */
+    wmi_mac_addr    peer_macaddr;
+    /** TDLS peer status (wmi_tdls_peer_notification)*/
+    A_UINT32        peer_status;
+    /** TDLS peer reason (wmi_tdls_peer_reason) */
+    A_UINT32        peer_reason;
+    /** unique id identifying the VDEV */
+    A_UINT32        vdev_id;
+} wmi_tdls_peer_event_fixed_param;
+
+/* NOTE: wmi_vdev_mcc_bcn_intvl_change_event_fixed_param would be deprecated. Please
+ don't use this for any new implementations */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_mcc_bcn_intvl_change_event_fixed_param  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* New beacon interval to be used for the specified VDEV suggested by firmware */
+    A_UINT32 new_bcn_intvl;
+} wmi_vdev_mcc_bcn_intvl_change_event_fixed_param;
+
+/* WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** 1: enable fw based adaptive ocs,
+     *  0: disable fw based adaptive ocs
+     */
+    A_UINT32 enable;
+    /** This field contains the MAC identifier in order to lookup the appropriate OCS instance. */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+} wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param;
+
+/* WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID */
+typedef struct {
+    /* Frequency of the channel for which the quota is set */
+    A_UINT32 chan_mhz;
+    /* Requested channel time quota expressed as percentage */
+    A_UINT32 channel_time_quota;
+} wmi_resmgr_chan_time_quota;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resmgr_set_chan_time_quota_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** number of channel time quota command structures
+     * (wmi_resmgr_chan_time_quota) 1 or 2
+     */
+    A_UINT32 num_chans;
+/* This TLV is followed by another TLV of array of bytes
+ * A_UINT8 data[];
+ * This data array contains
+ * num_chans * size of(struct wmi_resmgr_chan_time_quota)
+ */
+} wmi_resmgr_set_chan_time_quota_cmd_fixed_param;
+
+/* WMI_RESMGR_SET_CHAN_LATENCY_CMDID */
+typedef struct {
+    /* Frequency of the channel for which the latency is set */
+    A_UINT32 chan_mhz;
+    /* Requested channel latency in milliseconds */
+    A_UINT32 latency;
+} wmi_resmgr_chan_latency;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resmgr_set_chan_latency_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** number of channel latency command structures
+     * (wmi_resmgr_chan_latency) 1 or 2
+     */
+    A_UINT32 num_chans;
+/* This TLV is followed by another TLV of array of bytes
+ * A_UINT8 data[];
+ * This data array contains
+ * num_chans * size of(struct wmi_resmgr_chan_latency)
+ */
+} wmi_resmgr_set_chan_latency_cmd_fixed_param;
+
+/* WMI_STA_SMPS_FORCE_MODE_CMDID */
+
+/** STA SMPS Forced Mode */
+typedef enum {
+    WMI_SMPS_FORCED_MODE_NONE = 0,
+    WMI_SMPS_FORCED_MODE_DISABLED,
+    WMI_SMPS_FORCED_MODE_STATIC,
+    WMI_SMPS_FORCED_MODE_DYNAMIC
+} wmi_sta_smps_forced_mode;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** The mode of SMPS that is to be forced in the FW. */
+    A_UINT32 forced_mode;
+} wmi_sta_smps_force_mode_cmd_fixed_param;
+
+/** wlan HB commands */
+#define WMI_WLAN_HB_ITEM_UDP            0x1
+#define WMI_WLAN_HB_ITEM_TCP            0x2
+#define WMI_WLAN_HB_MAX_FILTER_SIZE     32 /* should be equal to WLAN_HB_MAX_FILTER_SIZE,
+                                              must be a multiple of 4 bytes */
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_hb_set_enable_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 enable;
+    A_UINT32 item;
+    A_UINT32 session;
+} wmi_hb_set_enable_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_hb_set_tcp_params_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 srv_ip;
+    A_UINT32 dev_ip;
+    A_UINT32 seq;
+    A_UINT32 src_port;
+    A_UINT32 dst_port;
+    A_UINT32 interval;
+    A_UINT32 timeout;
+    A_UINT32 session;
+    wmi_mac_addr gateway_mac;
+} wmi_hb_set_tcp_params_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_hb_set_tcp_pkt_filter_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 length;
+    A_UINT32 offset;
+    A_UINT32 session;
+    A_UINT8  filter[WMI_WLAN_HB_MAX_FILTER_SIZE];
+} wmi_hb_set_tcp_pkt_filter_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_hb_set_udp_params_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 srv_ip;
+    A_UINT32 dev_ip;
+    A_UINT32 src_port;
+    A_UINT32 dst_port;
+    A_UINT32 interval;
+    A_UINT32 timeout;
+    A_UINT32 session;
+    wmi_mac_addr gateway_mac;
+} wmi_hb_set_udp_params_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_hb_set_udp_pkt_filter_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 length;
+    A_UINT32 offset;
+    A_UINT32 session;
+    A_UINT8  filter[WMI_WLAN_HB_MAX_FILTER_SIZE];
+} wmi_hb_set_udp_pkt_filter_cmd_fixed_param;
+
+/** wlan HB events */
+typedef enum {
+    WMI_WLAN_HB_REASON_UNKNOWN      = 0,
+    WMI_WLAN_HB_REASON_TCP_TIMEOUT  = 1,
+    WMI_WLAN_HB_REASON_UDP_TIMEOUT  = 2,
+} WMI_HB_WAKEUP_REASON;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_hb_ind_event_fixed_param */
+    A_UINT32 vdev_id;    /* unique id identifying the VDEV */
+    A_UINT32 session;    /* Session ID from driver */
+    A_UINT32 reason;     /* wakeup reason */
+} wmi_hb_ind_event_fixed_param;
+
+/** WMI_STA_SMPS_PARAM_CMDID */
+typedef enum {
+    /** RSSI threshold to enter Dynamic SMPS mode from inactive mode */
+    WMI_STA_SMPS_PARAM_UPPER_RSSI_THRESH = 0,
+    /** RSSI threshold to enter Stalled-D-SMPS mode from D-SMPS mode or
+     * to enter D-SMPS mode from Stalled-D-SMPS mode */
+    WMI_STA_SMPS_PARAM_STALL_RSSI_THRESH = 1,
+    /** RSSI threshold to disable SMPS modes */
+    WMI_STA_SMPS_PARAM_LOWER_RSSI_THRESH = 2,
+    /** Upper threshold for beacon-RSSI. Used to reduce RX chainmask. */
+    WMI_STA_SMPS_PARAM_UPPER_BRSSI_THRESH = 3,
+    /** Lower threshold for beacon-RSSI. Used to increase RX chainmask. */
+    WMI_STA_SMPS_PARAM_LOWER_BRSSI_THRESH = 4,
+    /** Enable/Disable DTIM 1chRx feature */
+    WMI_STA_SMPS_PARAM_DTIM_1CHRX_ENABLE = 5
+} wmi_sta_smps_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_sta_smps_param_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** SMPS parameter (see wmi_sta_smps_param) */
+    A_UINT32 param;
+    /** Value of SMPS parameter */
+    A_UINT32 value;
+} wmi_sta_smps_param_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_mcc_sched_sta_traffic_stats */
+    A_UINT32 tlv_header;
+    /* TX stats */
+    A_UINT32 txBytesPushed;
+    A_UINT32 txPacketsPushed;
+    /* RX stats */
+    A_UINT32 rxBytesRcvd;
+    A_UINT32 rxPacketsRcvd;
+    A_UINT32 rxTimeTotal;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_mcc_sched_sta_traffic_stats;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_mcc_sched_traffic_stats_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** Duration over which the host stats were collected */
+    A_UINT32 duration;
+    /** Number of stations filled in following stats array */
+    A_UINT32 num_sta;
+    /* Following this struct are the TLVs:
+     * wmi_mcc_sched_sta_traffic_stats mcc_sched_sta_traffic_stats_list;
+     */
+} wmi_mcc_sched_traffic_stats_cmd_fixed_param;
+
+typedef struct
+{
+    A_UINT32 tlv_header;     /* TLV tag and len; tag equals  WMITLV_TAG_STRUC_wmi_batch_scan_enable_cmd_fixed_param */
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /*Batch scan enable command parameters*/
+    A_UINT32 scanInterval;
+    A_UINT32 numScan2Batch;
+    A_UINT32 bestNetworks;
+    A_UINT32 rfBand;
+    A_UINT32 rtt;
+} wmi_batch_scan_enable_cmd_fixed_param;
+
+typedef struct
+{
+    A_UINT32 tlv_header;     /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_batch_scan_enabled_event_fixed_param  */
+    A_UINT32 supportedMscan;
+}  wmi_batch_scan_enabled_event_fixed_param;
+
+typedef struct
+{
+    A_UINT32 tlv_header;     /* TLV tag and len; tag equals  WMITLV_TAG_STRUC_wmi_batch_scan_disable_cmd_fixed_param */
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    A_UINT32   param;
+} wmi_batch_scan_disable_cmd_fixed_param;
+
+typedef struct
+{
+    A_UINT32 tlv_header;     /* TLV tag and len; tag equals  WMITLV_TAG_STRUC_wmi_batch_scan_trigger_result_cmd_fixed_param */
+ /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    A_UINT32 param;
+} wmi_batch_scan_trigger_result_cmd_fixed_param;
+
+typedef struct
+{
+    A_UINT32 tlv_header;
+    wmi_mac_addr   bssid;     /* BSSID */
+    wmi_ssid   ssid;     /* SSID */
+    A_UINT32   ch;           /* Channel */
+    A_UINT32   rssi;         /* RSSI or Level */
+    /* Timestamp when Network was found. Used to calculate age based on timestamp in GET_RSP msg header */
+    A_UINT32  timestamp;
+} wmi_batch_scan_result_network_info;
+
+typedef struct
+{
+    A_UINT32 tlv_header;
+    A_UINT32 scanId;                         /* Scan List ID. */
+    /* No of AP in a Scan Result. Should be same as bestNetwork in SET_REQ msg */
+    A_UINT32 numNetworksInScanList;
+    A_UINT32 netWorkStartIndex;  /* indicate the start index of network info*/
+} wmi_batch_scan_result_scan_list;
+
+#define LPI_IE_BITMAP_BSSID                  0x00000001     /* if this bit is set, bssid of the scan response frame is sent as the first IE in the data buffer sent to LOWI LP. */
+#define LPI_IE_BITMAP_IS_PROBE               0x00000002     /* send true or false based on scan response frame being a Probe Rsp or not */
+#define LPI_IE_BITMAP_SSID                   0x00000004     /* send ssid from received scan response frame */
+#define LPI_IE_BITMAP_RSSI                   0x00000008     /* send RSSI value reported by HW for the received scan response after adjusting with noise floor */
+#define LPI_IE_BITMAP_CHAN                   0x00000010     /* send channel number from the received scan response */
+#define LPI_IE_BITMAP_AP_TX_PWR              0x00000020     /* send Tx power from TPC IE of scan rsp */
+#define LPI_IE_BITMAP_TX_RATE                0x00000040     /* send rate of the received frame as reported by HW. */
+#define LPI_IE_BITMAP_80211_MC_SUPPORT       0x00000080     /* send true or false based on the received scan rsp was from a 11mc supported AP or not. */
+#define LPI_IE_BITMAP_TSF_TIMER_VALUE        0x00000100     /* send timestamp reported in the received scan rsp frame. */
+#define LPI_IE_BITMAP_AGE_OF_MEASUREMENT     0x00000200     /* (current system time - received time) = duration of time scan rsp frame data is kept in the buffer before sending to LOWI LP. */
+/*
+ * TEMPORARY alias of incorrect old name the correct name.
+ * This alias will be removed once all references to the old name have been fixed.
+ */
+#define LPI_IE_BITMAP_AGE_OF_MESAUREMENT LPI_IE_BITMAP_AGE_OF_MEASUREMENT
+#define LPI_IE_BITMAP_CONN_STATUS            0x00000400     /* If an infra STA is active and connected to an AP, true value is sent else false. */
+#define LPI_IE_BITMAP_MSAP_IE                0x00000800     /* info on the vendor specific proprietary IE MSAP */
+#define LPI_IE_BITMAP_SEC_STATUS             0x00001000     /* we indicate true or false based on if the AP has WPA or RSN security enabled */
+#define LPI_IE_BITMAP_DEVICE_TYPE            0x00002000     /* info about the beacons coming from an AP or P2P or NAN device. */
+#define LPI_IE_BITMAP_CHAN_IS_PASSIVE        0x00004000     /* info on whether the scan rsp was received from a passive channel */
+#define LPI_IE_BITMAP_DWELL_TIME             0x00008000     /* send the scan dwell time of the channel on which the current scan rsp frame was received. */
+#define LPI_IE_BITMAP_BAND_CENTER_FREQ1      0x00010000     /* the center frequencies in case AP is supporting wider channels than 20 MHz */
+#define LPI_IE_BITMAP_BAND_CENTER_FREQ2      0x00020000     /* same as above */
+#define LPI_IE_BITMAP_PHY_MODE               0x00040000     /* PHY mode indicates a, b, ,g, ac and other combinations */
+#define LPI_IE_BITMAP_SCAN_MODULE_ID         0x00080000     /* scan module id indicates the scan client who originated the scan */
+#define LPI_IE_BITMAP_SCAN_ID                0x00100000     /* extscan inserts the scan cycle count for this value; other scan clients can insert the scan id of the scan, if needed. */
+#define LPI_IE_BITMAP_FLAGS                  0x00200000     /* reserved as a bitmap to indicate more scan information; one such use being to indicate if the on-going scan is interrupted or not */
+#define LPI_IE_BITMAP_CACHING_REQD           0x00400000     /* extscan will use this field to indicate if this frame info needs to be cached in LOWI LP or not */
+#define LPI_IE_BITMAP_REPORT_CONTEXT_HUB     0x00800000     /* extscan will use this field to indicate to LOWI LP whether to report result to context hub or not. */
+#define LPI_IE_BITMAP_ALL                    0xFFFFFFFF
+
+typedef struct {
+    A_UINT32 tlv_header;
+    /**A_BOOL indicates LPI mgmt snooping enable/disable*/
+    A_UINT32 enable;
+    /**LPI snooping mode*/
+    A_UINT32 snooping_mode;
+    /** LPI interested IEs in snooping context */
+    A_UINT32 ie_bitmap;
+} wmi_lpi_mgmt_snooping_config_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param */
+    /** Scan ID */
+    A_UINT32 scan_id;
+    /** Scan requestor ID */
+    A_UINT32 scan_req_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32 vdev_id;
+    /** LPI interested IEs in scan context */
+    A_UINT32 ie_bitmap;
+    /** Scan Priority, input to scan scheduler */
+    A_UINT32 scan_priority;
+    /** dwell time in msec on active channels */
+    A_UINT32 dwell_time_active;
+    /** dwell time in msec on passive channels */
+    A_UINT32 dwell_time_passive;
+    /** min time in msec on the BSS channel,only valid if atleast one VDEV is active*/
+    A_UINT32 min_rest_time;
+    /** max rest time in msec on the BSS channel,only valid if at least one VDEV is active*/
+    /** the scanner will rest on the bss channel at least min_rest_time. after min_rest_time the scanner
+     *  will start checking for tx/rx activity on all VDEVs. if there is no activity the scanner will
+     *  switch to off channel. if there is activity the scanner will let the radio on the bss channel
+     *  until max_rest_time expires.at max_rest_time scanner will switch to off channel
+     *  irrespective of activity. activity is determined by the idle_time parameter.
+     */
+    A_UINT32 max_rest_time;
+    /** time before sending next set of probe requests.
+     *   The scanner keeps repeating probe requests transmission with period specified by repeat_probe_time.
+     *   The number of probe requests specified depends on the ssid_list and bssid_list
+     */
+    A_UINT32 repeat_probe_time;
+    /** time in msec between 2 consequetive probe requests with in a set. */
+    A_UINT32 probe_spacing_time;
+    /** data inactivity time in msec on bss channel that will be used by scanner for measuring the inactivity  */
+    A_UINT32 idle_time;
+    /** maximum time in msec allowed for scan  */
+    A_UINT32 max_scan_time;
+    /** delay in msec before sending first probe request after switching to a channel */
+    A_UINT32 probe_delay;
+    /** Scan control flags */
+    A_UINT32 scan_ctrl_flags;
+    /** Burst duration time in msec*/
+    A_UINT32 burst_duration;
+
+    /** # if channels to scan. In the TLV channel_list[] */
+    A_UINT32 num_chan;
+    /** number of bssids. In the TLV bssid_list[] */
+    A_UINT32 num_bssid;
+    /** number of ssid. In the TLV ssid_list[] */
+    A_UINT32 num_ssids;
+    /** number of bytes in ie data. In the TLV ie_data[] */
+    A_UINT32 ie_len;
+
+/**
+ * TLV (tag length value) parameters follow the scan_cmd
+ * structure. The TLV's are:
+ *     A_UINT32 channel_list[];
+ *     wmi_ssid ssid_list[];
+ *     wmi_mac_addr bssid_list[];
+ *     A_UINT8 ie_data[];
+ */
+} wmi_lpi_start_scan_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param */
+    /** Scan requestor ID */
+    A_UINT32 scan_req_id;
+    /** Scan ID */
+    A_UINT32 scan_id;
+    /**
+     * Req Type
+     * req_type should be WMI_SCAN_STOP_ONE, WMI_SCN_STOP_VAP_ALL or WMI_SCAN_STOP_ALL
+     * WMI_SCAN_STOP_ONE indicates to stop a specific scan with scan_id
+     * WMI_SCN_STOP_VAP_ALL indicates to stop all scan requests on a specific vDev with vdev_id
+     * WMI_SCAN_STOP_ALL indicates to stop all scan requests in both Scheduler's queue and Scan Engine
+     */
+    A_UINT32 req_type;
+    /**
+     * vDev ID
+     * used when req_type equals to WMI_SCN_STOP_VAP_ALL, it indexed the vDev on which to stop the scan
+     */
+    A_UINT32 vdev_id;
+} wmi_lpi_stop_scan_cmd_fixed_param;
+
+typedef enum {
+   WMI_LPI_DEVICE_TYPE_AP = 1,
+   WMI_LPI_DEVICE_TYPE_P2P = 2,
+   WMI_LPI_DEVICE_TYPE_NAN = 3,
+} wmi_lpi_device_type;
+
+typedef struct
+{
+    A_UINT32 tlv_header;
+    /** Scan requestor ID */
+    A_UINT32 scan_req_id;
+    A_UINT32 ie_bitmap;
+    A_UINT32 data_len;
+}  wmi_lpi_result_event_fixed_param;
+
+typedef enum {
+   /** User scan Request completed */
+   WMI_LPI_STATUS_SCAN_REQ_COMPLED = 0,
+   /** User Request was never serviced */
+   WMI_LPI_STATUS_DROPPED_REQ = 1,
+   /** Illegal channel Req */
+   WMI_LPI_STATUS_ILLEGAL_CHAN_REQ = 2,
+   /** Illegal Operation Req */
+   WMI_LPI_STATUS_ILLEGAL_OPER_REQ = 3,
+   /** Request Aborted */
+   WMI_LPI_STATUS_REQ_ABORTED = 4,
+   /** Request Timed Out */
+   WMI_LPI_STATUS_REQ_TIME_OUT = 5,
+   /** Medium Busy, already there
+    * is a scan is going on */
+   WMI_LPI_STATUS_MEDIUM_BUSY = 6,
+   /** Extscan is the scan client whose scan complete event is triggered */
+   WMI_LPI_STATUS_EXTSCAN_CYCLE_AND_SCAN_REQ_COMPLETED = 7,
+} wmi_lpi_staus;
+
+typedef struct
+{
+    A_UINT32      tlv_header;
+    wmi_lpi_staus status;
+    /** Scan requestor ID */
+    A_UINT32      scan_req_id;
+}  wmi_lpi_status_event_fixed_param;
+
+
+typedef struct
+{
+    A_UINT32      tlv_header;
+    wmi_mac_addr  bssid;
+    wmi_ssid      ssid;
+    A_UINT32      freq;
+    A_UINT32      rssi;
+    A_UINT32      vdev_id;
+}  wmi_lpi_handoff_event_fixed_param;
+typedef struct
+{
+    A_UINT32 tlv_header;
+    A_UINT32 timestamp;   /*timestamp of batch scan event*/
+    A_UINT32 numScanLists;  /*number of scan in this event*/
+    A_UINT32 isLastResult;  /*is this event a last event of the whole batch scan*/
+}  wmi_batch_scan_result_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_noa_event_fixed_param  */
+    A_UINT32 vdev_id;
+/* This TLV is followed by p2p_noa_info for vdev :
+ *     wmi_p2p_noa_info p2p_noa_info;
+ */
+} wmi_p2p_noa_event_fixed_param;
+
+#define WMI_RFKILL_CFG_RADIO_LEVEL_OFFSET      6
+#define WMI_RFKILL_CFG_RADIO_LEVEL_MASK      0x1
+
+#define WMI_RFKILL_CFG_GPIO_PIN_NUM_OFFSET      0
+#define WMI_RFKILL_CFG_GPIO_PIN_NUM_MASK      0x3f
+
+#define WMI_RFKILL_CFG_PIN_AS_GPIO_OFFSET      7
+#define WMI_RFKILL_CFG_PIN_AS_GPIO_MASK      0xf
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     * */
+    A_UINT32 tlv_header;
+    /** gpip pin number */
+    A_UINT32 gpio_pin_num;
+    /** gpio interupt type */
+    A_UINT32 int_type;
+    /** RF radio status */
+    A_UINT32 radio_state;
+} wmi_rfkill_mode_param;
+
+typedef enum {
+    WMI_SET_LED_SYS_POWEROFF,
+    WMI_SET_LED_SYS_S3_SUSPEND,
+    WMI_SET_LED_SYS_S4_S5,
+    WMI_SET_LED_SYS_DRIVER_DISABLE,
+    WMI_SET_LED_SYS_WAKEUP,
+    WMI_SET_LED_SYS_ALWAYS_ON, /* just for test! */
+    WMI_SET_LED_SYS_POWERON,
+} wmi_led_sys_state_param;
+
+typedef enum {
+    WMI_CONFIG_LED_TO_VDD = 0,
+    WMI_CONFIG_LED_TO_GND = 1,
+} wmi_config_led_connect_type;
+
+typedef enum {
+   WMI_CONFIG_LED_NOT_WITH_BT = 0,
+   WMI_CONFIG_LED_WITH_BT = 1,
+} wmi_config_led_with_bt_flag;
+
+typedef enum {
+   WMI_CONFIG_LED_DISABLE = 0,
+   WMI_CONFIG_LED_ENABLE  = 1,
+} wmi_config_led_enable_flag;
+
+typedef enum {
+    WMI_CONFIG_LED_HIGH_UNSPECIFIED = 0,
+    WMI_CONFIG_LED_HIGH_OFF         = 1,
+    WMI_CONFIG_LED_HIGH_ON          = 2,
+} wmi_config_led_on_flag;
+
+typedef enum {
+    WMI_CONFIG_LED_UNSPECIFIED = 0,
+    WMI_CONFIG_LED_ON          = 1,
+    WMI_CONFIG_LED_OFF         = 2,
+    WMI_CONFIG_LED_DIM         = 3,
+    WMI_CONFIG_LED_BLINK       = 4,
+    WMI_CONFIG_LED_TXRX        = 5,
+} wmi_config_led_operation_type;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_pdev_set_led_config_cmd_fixed_param */
+    A_UINT32 tlv_header;
+	/* Set GPIO pin */
+    A_UINT32 led_gpio_pin;
+	/* Set connect type defined in wmi_config_led_connect_type */
+    A_UINT32 connect_type;
+	/* Set flag defined in wmi_config_led_with_bt_flag*/
+    A_UINT32 with_bt;
+	/* Set LED enablement defined in wmi_config_led_enable_flag */
+	A_UINT32 led_enable;
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    /* see wmi_config_led_operation_type enum */
+    A_UINT32 led_operation_type;
+    /* see wmi_config_led_on_flag enum */
+    A_UINT32 led_on_flag;      /* configure high/low on/off sense */
+    A_UINT32 led_on_interval;  /* for blink function; unit: ms */
+    A_UINT32 led_off_interval; /* for blink function; unit: ms */
+    A_UINT32 led_repeat_cnt;   /* for blink function: how many blinks */
+} wmi_pdev_set_led_config_cmd_fixed_param;
+
+#define WMI_WNTS_CFG_GPIO_PIN_NUM_OFFSET 0
+#define WMI_WNTS_CFG_GPIO_PIN_NUM_MASK   0xff
+
+/** WMI_PEER_INFO_REQ_CMDID
+ *   Request FW to provide peer info */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_peer_info_req_cmd_fixed_param   */
+    A_UINT32 tlv_header;
+    /** In order to get the peer info for a single peer, host shall
+     *  issue the peer_mac_address of that peer. For getting the
+     *  info all peers, the host shall issue 0xFFFFFFFF as the mac
+     *  address. The firmware will return the peer info for all the
+     *  peers on the specified vdev_id */
+    wmi_mac_addr peer_mac_address;
+    /** vdev id */
+    A_UINT32 vdev_id;
+} wmi_peer_info_req_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_peer_info */
+    A_UINT32 tlv_header;
+    /** mac addr of the peer */
+    wmi_mac_addr peer_mac_address;
+    /** data_rate of the peer */
+    A_UINT32 data_rate;
+    /** rssi of the peer */
+    A_UINT32 rssi;
+    /** tx fail count */
+    A_UINT32 tx_fail_cnt;
+} wmi_peer_info;
+
+/** FW response with the peer info */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_peer_info_event_fixed_param   */
+    A_UINT32 tlv_header;
+    /** number of peers in peer_info */
+    A_UINT32 num_peers;
+    /* Set to 1 only if vdev_id field is valid */
+    A_UINT32 valid_vdev_id;
+    /* VDEV to which the peer belongs to */
+    A_UINT32 vdev_id;
+    /* This TLV is followed by another TLV of array of structs
+     * wmi_peer_info peer_info[];
+     */
+} wmi_peer_info_event_fixed_param;
+
+/** WMI_PEER_ANTDIV_INFO_REQ_CMDID
+ *   Request FW to provide peer info */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_peer_antdiv_info_req_cmd_fixed_param   */
+    A_UINT32 tlv_header;
+    /** In order to get the peer antdiv info for a single peer, host shall
+     *  issue the peer_mac_address of that peer. For getting the
+     *  info all peers, the host shall issue 0xFFFFFFFF as the mac
+     *  address. The firmware will return the peer info for all the
+     *  peers on the specified vdev_id */
+    wmi_mac_addr peer_mac_address;
+    /** vdev id */
+    A_UINT32 vdev_id;
+} wmi_peer_antdiv_info_req_cmd_fixed_param;
+
+/** FW response with the peer antdiv info */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_peer_antdiv_info_event_fixed_param   */
+    A_UINT32 tlv_header;
+    /** number of peers in peer_info */
+    A_UINT32 num_peers;
+    /* VDEV to which the peer belongs to */
+    A_UINT32 vdev_id;
+    /* This TLV is followed by another TLV of array of structs
+     * wmi_peer_antdiv_info peer_antdiv_info[];
+     */
+} wmi_peer_antdiv_info_event_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_peer_antdiv_info */
+    A_UINT32 tlv_header;
+    /** mac addr of the peer */
+    wmi_mac_addr peer_mac_address;
+    /** per chain rssi of the peer, for up to 8 chains.
+     * Each chain's entry reports the RSSI for different bandwidths:
+     * bits 7:0   -> primary 20 MHz
+     * bits 15:8  -> secondary 20 MHz of  40 MHz channel (if applicable)
+     * bits 23:16 -> secondary 40 MHz of  80 MHz channel (if applicable)
+     * bits 31:24 -> secondary 80 MHz of 160 MHz channel (if applicable)
+     * Each of these 8-bit RSSI reports is in dB units, with respect to
+     * the noise floor.
+     * 0x80 means invalid.
+     * All unused bytes within used chain_rssi indices shall be set to 0x80.
+     * All unused chain_rssi indices shall be set to 0x80808080.
+     */
+    A_INT32 chain_rssi[8];
+} wmi_peer_antdiv_info;
+
+/** FW response when tx failure count has reached threshold
+ *  for a peer */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_peer_tx_fail_cnt_thr_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** vdev id*/
+    A_UINT32 vdev_id;
+    /** mac address */
+    wmi_mac_addr peer_mac_address;
+    /** tx failure count - will eventually be removed and not used */
+    A_UINT32 tx_fail_cnt;
+    /** seq number of the nth tx_fail_event */
+    A_UINT32 seq_no;
+} wmi_peer_tx_fail_cnt_thr_event_fixed_param;
+
+enum wmi_rmc_mode {
+   /** Disable RMC */
+   WMI_RMC_MODE_DISABLED = 0,
+   /** Enable RMC */
+   WMI_RMC_MODE_ENABLED = 1,
+};
+
+/** Enable RMC transmitter functionality. Upon
+ *  receiving this, the FW shall mutlicast frames with
+ *  reliablity. This is a vendor
+ *  proprietary feature. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param   */
+    A_UINT32 tlv_header;
+    /** vdev id*/
+    A_UINT32 vdev_id;
+    /** enable_rmc contains values from enum wmi_rmc_mode;
+     *  Default value: 0 (disabled) */
+    A_UINT32 enable_rmc;
+} wmi_rmc_set_mode_cmd_fixed_param;
+
+/** Configure transmission periodicity of action frames in a
+ *  RMC network for the multicast transmitter */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_rmc_set_action_period_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** vdev id */
+    A_UINT32 vdev_id;
+    /** time period in milliseconds. Default: 300 ms.
+       An action frame indicating the current leader is transmitted by the
+       RMC transmitter once every 'periodity_msec' */
+    A_UINT32 periodicity_msec;
+} wmi_rmc_set_action_period_cmd_fixed_param;
+
+/** Optimise Leader selection process in RMC functionality. For
+ *  Enhancement/Debug purposes only */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_rmc_config_cmd_fixed_param   */
+    A_UINT32 tlv_header;
+    /** vdev id */
+    A_UINT32 vdev_id;
+    /** flags ::
+     *  0x0001 - Enable beacon averaging
+     *  0x0002 - Force leader selection
+     *  0x0004 - Enable Timer based leader switch
+     *  0x0008 - Use qos/NULL based for multicast reliability */
+    A_UINT32 flags;
+    /**  control leader change timeperiod (in seconds) */
+    A_UINT32 peridocity_leader_switch;
+    /** control activity timeout value for data rx (in seconds) */
+    A_UINT32 data_activity_timeout;
+    /** mac address of leader */
+    wmi_mac_addr forced_leader_mac_addr;
+} wmi_rmc_config_cmd_fixed_param;
+
+/** MHF is generally implemented in
+ *  the kernel. To decrease system power consumption, the
+ *  driver can enable offloading this to the chipset. In
+ *  order for the offload, the firmware needs the routing table.
+ *  The host shall plumb the routing table into FW. The firmware
+ *  shall perform an IP address lookup and forward the packet to
+ *  the next hop using next hop's mac address. This is a vendor
+ *  proprietary feature. */
+enum wmi_mhf_ofl_mode {
+   /** Disable MHF offload */
+   WMI_MHF_OFL_MODE_DISABLED = 0,
+   /** Enable MHF offload */
+   WMI_MHF_OFL_MODE_ENABLED = 1,
+};
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_mhf_offload_set_mode_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** vdev id*/
+    A_UINT32 vdev_id;
+    /** enable_mhf_ofl contains values from enum
+     *  wmi_mhf_ofl_mode; Default value: 0 (disabled) */
+    A_UINT32 enable_mhf_ofl;
+} wmi_mhf_offload_set_mode_cmd_fixed_param;
+
+enum wmi_mhf_ofl_table_action {
+   /** Create MHF offload table in FW */
+   WMI_MHF_OFL_TBL_CREATE = 0,
+   /** Append to existing MHF offload table */
+   WMI_MHF_OFL_TBL_APPEND = 1,
+   /** Flush entire MHF offload table in FW */
+   WMI_MHF_OFL_TBL_FLUSH = 2,
+};
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_mhf_offload_plumb_routing_table_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** vdev id*/
+    A_UINT32 vdev_id;
+    /** action corresponds to values from enum
+     *  wmi_mhf_ofl_table_action */
+    A_UINT32 action;
+    /** number of entries in the table */
+    A_UINT32 num_entries;
+/** Followed by the variable length TLV
+ *  wmi_mhf_offload_routing_table_entry entries[] */
+} wmi_mhf_offload_plumb_routing_table_cmd;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_mhf_offload_routing_table_entry */
+    A_UINT32 tlv_header;
+    /** Destination node's IP address */
+    WMI_IPV4_ADDR dest_ipv4_addr;
+    /** Next hop node's MAC address */
+    wmi_mac_addr next_hop_mac_addr;
+} wmi_mhf_offload_routing_table_entry;
+
+typedef struct {
+    /** tlv tag and len, tag equals
+      * WMITLV_TAG_STRUC_wmi_dfs_radar_event */
+    A_UINT32 tlv_header;
+
+    /** full 64 tsf timestamp get from MAC tsf timer indicates
+     * the time that the radar event uploading to host, split
+     * it to high 32 bit and lower 32 bit in fulltsf_high and
+     * full_tsf_low
+     */
+    A_UINT32 upload_fullts_low;
+    A_UINT32 upload_fullts_high;
+
+    /** timestamp indicates the time when DFS pulse is detected
+     * equal to ppdu_end_ts - radar_pusle_summary_ts_offset
+     */
+    A_UINT32 pulse_detect_ts;
+
+    /** the duaration of the pulse in us */
+    A_UINT32 pulse_duration;
+
+    /** the center frequency of the radar pulse detected, KHz */
+    A_UINT32 pulse_center_freq;
+
+    /** bandwidth of current DFS channel, MHz */
+    A_UINT32 ch_bandwidth;
+
+    /** center channel frequency1 of current DFS channel, MHz */
+    A_UINT16 ch_center_freq1;
+
+    /** center channel frequency2 of current DFS channel, MHz,
+     * reserved for 160 BW mode
+     */
+    A_UINT16 ch_center_freq2;
+
+    /** flag to indicate if this pulse is chirp */
+    A_UINT8  pulse_is_chirp;
+
+    /** RSSI recorded in the ppdu */
+    A_UINT8  rssi;
+
+    /** extened RSSI info */
+    A_UINT8  rssi_ext;
+
+    union {
+        A_UINT8 pmac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT8 pdev_id;
+    };
+
+    /** index of peak magnitude bin (signed) */
+    A_INT32 peak_sidx;
+
+} wmi_dfs_radar_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_thermal_mgmt_cmd_fixed_param  */
+
+    /*Thermal thresholds*/
+    A_UINT32 lower_thresh_degreeC; /* in degree C*/
+    A_UINT32 upper_thresh_degreeC; /* in degree C*/
+
+    /*Enable/Disable Thermal Monitoring for Mitigation*/
+    A_UINT32 enable;
+} wmi_thermal_mgmt_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_thermal_mgmt_event_fixed_param  */
+
+    A_UINT32 temperature_degreeC;/* temperature in degree C*/
+} wmi_thermal_mgmt_event_fixed_param;
+
+/**
+* This command is sent from WLAN host driver to firmware to
+ * request firmware to configure auto shutdown timer in fw
+ * 0 - Disable <1-19600>-Enabled and timer value is seconds (86400 seconds = 1 day maximum>
+ */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_host_auto_shutdown_cfg_cmd_param  */
+    A_UINT32 timer_value;   /** timer value; 0=disable */
+} wmi_host_auto_shutdown_cfg_cmd_fixed_param;
+
+enum wmi_host_auto_shutdown_reason {
+    WMI_HOST_AUTO_SHUTDOWN_REASON_UNKNOWN = 0,
+    WMI_HOST_AUTO_SHUTDOWN_REASON_TIMER_EXPIRY = 1,
+    WMI_HOST_AUTO_SHUTDOWN_REASON_MAX,
+};
+
+/* WMI_HOST_AUTO_SHUTDOWN_EVENTID  */
+typedef struct{
+    A_UINT32    tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_host_auto_shutdown_event_fixed_param  */
+    A_UINT32    shutdown_reason; /* value: wmi_host_auto_shutdown_reason */
+} wmi_host_auto_shutdown_event_fixed_param;
+
+
+
+/** New WMI command to support TPC CHAINMASK ADJUSTMENT ACCORDING TO a set of conditions specified in the command.
+ *  fw will save c tpc offset/chainmask along with conditions and adjust tpc/chainmask when condition meet.
+ *  This command is only used by some customer for  verification test.  It is not for end-user.
+ *
+ *  array of wmi_tpc_chainmask_config structures are passed with the command to specify multiple conditions.
+ *
+ *  The set of conditions include bt status, stbc status, band, phy_mode, 1stream/2streams, channel, rate. when all these conditions meet,
+ *  the output(tpc_offset,chainmask) will be applied on per packet basis. ack_offset is applied based on channel condtion only. When multiple
+ *  conditions has the same channel ,then the first ack_offset will be applied. It is better for host driver to make sure the
+ *  <channel, ack_offset> pair is unique.
+ *
+ *  the conditions (bt status, stbc status, band, phy_mode, 1steam/2streams, tpc_offset, ack_offset, chainmask) are combinedi into a single word
+ *  called basic_config_info by bitmap
+ *  to save memory. And channel & rate info will be tracked by 'channel' field and 'rate0', 'rate1' field because of its large combination.
+ *
+ *  'rate bit' or 'channel bit' field of basic_config_info indicate validity of the channel and rate fields.if rate bit is 0 then the rate field
+ *   is ignored.
+ *  disable will remove preious conditions from FW.
+ *  conditions from the later command will over write conditions stored from a previous command.
+ *
+ */
+
+#define WMI_TPC_CHAINMASK_CONFIG_BT_ON_OFF    0   /** dont' care the bt status */
+#define WMI_TPC_CHAINMASK_CONFIG_BT_ON        1   /** apply only when bt on */
+#define WMI_TPC_CHAINMASK_CONFIG_BT_OFF       2   /** apply only when bt off  */
+#define WMI_TPC_CHAINMASK_CONFIG_BT_RESV1     3   /** reserved  */
+
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_DONT_CARE   0   /**  don't care the chainmask */
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_CHAIN0      1   /**  force to use Chain0 to send */
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_CHAIN1      2   /**  force to use Chain1 to send */
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_CHAIN0_CHAIN1  3   /** force to use Chain0 & Chain1 to send */
+
+#define WMI_TPC_CHAINMASK_CONFIG_STBC_ON_OFF  0   /**  don't care about stbc  */
+#define WMI_TPC_CHAINMASK_CONFIG_STBC_ON      1   /**  apply only when stbc on */
+#define WMI_TPC_CHAINMASK_CONFIG_STBC_OFF     2   /**  apply only when stbc off */
+#define WMI_TPC_CHAINMASK_CONFIG_STBC_RESV1   3   /**  reserved */
+
+#define WMI_TPC_CHAINMASK_CONFIG_BAND_2G      0   /**  2G */
+#define WMI_TPC_CHAINMASK_CONFIG_BAND_5G      1   /**  5G */
+
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11B_2G    0        /** 11b 2G */
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11G_2G    1        /** 11g 2G */
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_2G    2        /** 11n 2G */
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_2G   3    /** 11n + 11ac 2G */
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11A_5G    4        /** 11a 5G */
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_5G    5        /** 11n 5G */
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11AC_5G   6        /** 11ac 5G */
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_5G  7     /** 11n + 11ac 5G */
+
+#define WMI_TPC_CHAINMASK_CONFIG_STREAM_1           0    /** 1 stream  */
+#define WMI_TPC_CHAINMASK_CONFIG_STREAM_2           1    /** 2 streams */
+
+#define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_OFF        0    /** channel field is ignored */
+#define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_ON         1    /** channel field needs to be checked */
+
+#define WMI_TPC_CHAINMASK_CONFIG_RATE_OFF           0    /** rate field is ignored */
+#define WMI_TPC_CHAINMASK_CONFIG_RATE_ON            1    /** rate field needs to be checked */
+
+/**  Bit map definition for basic_config_info starts   */
+#define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_S   0
+#define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET     (0x1f << WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_S)
+#define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_GET(x)     WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET)
+#define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_SET(x,z)   WMI_F_RMW(x,(z) & 0x1f,WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET)
+
+#define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_S      5
+#define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET        (0x1f << WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_S)
+#define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_GET(x)     WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET)
+#define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_SET(x,z)   WMI_F_RMW(x, (z) & 0x1f, WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET)
+
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_S  10
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK   (0x3 << WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_S)
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_GET(x)   WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_CHAINMASK)
+#define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_SET(x,z)  WMI_F_RMW(x, (z) & 0x3, WMI_TPC_CHAINMASK_CONFIG_CHAINMASK)
+
+#define WMI_TPC_CHAINMASK_CONFIG_BT_S       12
+#define WMI_TPC_CHAINMASK_CONFIG_BT         (0x3 << WMI_TPC_CHAINMASK_CONFIG_BT_S)
+#define WMI_TPC_CHAINMASK_CONFIG_BT_GET(x)     WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_BT)
+#define WMI_TPC_CHAINMASK_CONFIG_BT_SET(x,z)   WMI_F_RMW(x, (z) & 0x3, WMI_TPC_CHAINMASK_CONFIG_BT)
+
+#define WMI_TPC_CHAINMASK_CONFIG_STBC_S     14
+#define WMI_TPC_CHAINMASK_CONFIG_STBC       (0x3 << WMI_TPC_CHAINMASK_CONFIG_STBC_S)
+#define WMI_TPC_CHAINMASK_CONFIG_STBC_GET(x)     WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_STBC)
+#define WMI_TPC_CHAINMASK_CONFIG_STBC_SET(x,z)   WMI_F_RMW(x, (z) & 0x3, WMI_TPC_CHAINMASK_CONFIG_STBC)
+
+#define WMI_TPC_CHAINMASK_CONFIG_BAND_S     16
+#define WMI_TPC_CHAINMASK_CONFIG_BAND       (0x1 << WMI_TPC_CHAINMASK_CONFIG_BAND_S)
+#define WMI_TPC_CHAINMASK_CONFIG_BAND_GET(x)  WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_BAND)
+#define WMI_TPC_CHAINMASK_CONFIG_BAND_SET(x,z) WMI_F_RMW(x, (z) & 0x1, WMI_TPC_CHAINMASK_CONFIG_BAND)
+
+#define WMI_TPC_CHAINMASK_CONFIG_STREAM_S   17
+#define WMI_TPC_CHAINMASK_CONFIG_STREAM     (0x1 << WMI_TPC_CHAINMASK_CONFIG_STREAM_S)
+#define WMI_TPC_CHAINMASK_CONFIG_STREAM_GET(x)  WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_STREAM)
+#define WMI_TPC_CHAINMASK_CONFIG_STREAM_SET(x,z)  WMI_F_RMW(x, (z) & 0x1, WMI_TPC_CHAINMASK_CONFIG_STREAM)
+
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_S     18
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE       (0x7 << WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_S)
+#define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_GET(x) WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_PHY_MODE)
+#define WMI_TPC_CHAINAMSK_CONFIG_PHY_MODE_SET(x,z)  WMI_F_RMW(x, (z) & 0x7, WMI_TPC_CHAINMASK_CONFIG_PHY_MODE)
+
+#define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_S     21
+/*
+ * The deprecated old name (WMI_TPC_CHAINMASK_CONFIG_CHANNEL_EXIST)
+ * is temporarily maintained as an alias for the correct name
+ * (WMI_TPC_CHAINMASK_CONFIG_CHANNEL)
+ */
+#define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_EXIST WMI_TPC_CHAINMASK_CONFIG_CHANNEL
+#define WMI_TPC_CHAINMASK_CONFIG_CHANNEL       (0x1 << WMI_TPC_CHAINMASK_CONFIG_CHANNEL_S)
+#define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_GET(x)  WMI_F_MS(x,WMI_TPC_CHAINMASK_CONFIG_CHANNEL)
+#define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_SET(x,z)  WMI_F_RMW(x, (z) & 0x1, WMI_TPC_CHAINMASK_CONFIG_CHANNEL)
+
+#define WMI_TPC_CHAINMASK_CONFIG_RATE_S  22
+/*
+ * The deprecated old name (WMI_TPC_CHAINMASK_CONFIG_RATE_EXIST)
+ * is temporarily maintained as an alias for the correct name
+ * (WMI_TPC_CHAINMASK_CONFIG_RATE)
+ */
+#define WMI_TPC_CHAINMASK_CONFIG_RATE_EXIST WMI_TPC_CHAINMASK_CONFIG_RATE
+#define WMI_TPC_CHAINMASK_CONFIG_RATE    (0x1 << WMI_TPC_CHAINMASK_CONFIG_RATE_S)
+#define WMI_TPC_CHAINMASK_CONFIG_RATE_GET(x)   WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_RATE)
+#define WMI_TPC_CHAINMASK_CONFIG_RATE_SET(x,z)  WMI_F_RMW(x, (z) & 0x1, WMI_TPC_CHAINMASK_CONFIG_RATE)
+
+/**  Bit map definition for basic_config_info ends   */
+
+typedef struct{
+    A_UINT32 tlv_header;
+    /** Basic condition defined as bit map above, bitmap is chosen to save memory.
+     * Bit0  ~ Bit4: tpc offset which will be adjusted if condtion matches, the unit is 0.5dB.  bit4 indicates signed
+     * Bit5  ~ Bit9: ack offset which will be adjusted if condtion matches, the unit is 0.5dB.  bit9 indicates signed
+     * Bit10 ~ Bit11: chainmask  b'00: don't care, b'01: force to use chain0, b'10: force to use chain1, b'11: force to use chain0&chain1
+     * Bit12 ~ Bit13: bt condition  b'00: don't care, b'01: apply only when bt on, b'10: apply only when bt off,  b'11: reserved
+     * Bit14 ~ Bit15: stbc condition  b'00: don't care, b'01: apply only when stbc on, b'10: apply only when stbc off, b'11: reserved
+     * Bit16 : band condition  b'0: 2G,  b'1: 5G
+     * Bit17 : stream condition:  b'0: 1 stream, b'1: 2 streams
+     * Bit18 ~ Bit20: phy mode condition: b'000: 11b 2g, b'001: 11g 2g, b'010: 11n 2g, b'011: 11n+11ac 2g, b'100: 11a, b'101: 11n 5g, b'110: 11ac 5g, b'111: 11n+11ac 5g
+     * Bit21 : channel bit, if this bit is 0, then the following channel field is ignored
+     * Bit22 : rate bit, if this bit is 0, then the following rate0&rate1 is ignored.
+     * Bit23 ~ Bit31:  reserved
+     */
+    A_UINT32 basic_config_info;
+
+    /** channel mapping bit rule: The lower bit corresponds with smaller channel.
+     *  it depends on Bit14 of basic_config_info
+     *  Total 24 channels for 5G
+     *  36    40    44    48    52    56    60    64   100   104   108   112   116   120   124   128   132   136   140   149   153   157   161   165
+     *  Total 14 channels for 2G
+     *  1 ~ 14
+     */
+    A_UINT32 channel;
+
+    /** rate mapping bit rule:  The lower bit corresponds with lower rate.
+     *  it depends on Bit16 ~ Bit18 of basic_config_info, "phy mode condition"
+     *  Legacy rates , 11b, 11g, 11A
+     *  11n one stream (ht20, ht40) 8+8
+     *  11n two streams (ht20, ht40) 8+8
+     *  11ac one stream (vht20, vht40, vht80) 10+10+10
+     *  11ac two streams (vht20, vht40, vht80) 10+10+10
+     */
+    A_UINT32 rate0;
+    /** For example, for 11b, when rate0 equals 0x3, it means if actual_rate in [ "1Mbps", "2Mbps"] connection, the rate condition is true.
+     *  For example, for 11g/11a, when rate0 equals 0xf0,it means "54Mbps", "48Mbps", "36Mbps", "24Mb's" is selected, while "18Mbps", "12Mbps", "9Mbps", "6Mbps" is not selected
+     */
+
+    /** only used for "11n+11ac" combined phy_mode, (WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_2G , WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_5G) in this case, 11n rates begins on rate0, while 11ac rates begins on rate1
+     */
+    A_UINT32 rate1;
+} wmi_tpc_chainmask_config;
+
+#define WMI_TPC_CHAINMASK_CONFIG_DISABLE   0   /** control the off for the tpc & chainmask*/
+#define WMI_TPC_CHAINMASK_CONFIG_ENABLE    1   /** control the on for the tpc & chainmask*/
+
+typedef struct{
+    A_UINT32 tlv_header;
+    A_UINT32 enable;  /** enable to set tpc & chainmask when condtions meet, 0: disabled,   1: enabled.  */
+    A_UINT32 num_tpc_chainmask_configs;
+    /** following this structure is num_tpc_chainmask_configs number of wmi_tpc_chainmask_config  */
+} wmi_tpc_chainmask_config_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_cmd_param */
+    A_UINT32 data_len; /** length in byte of data[]. */
+/* This structure is used to send REQ binary blobs
+* from application/service to firmware where Host drv is pass through .
+* Following this structure is the TLV:
+*     A_UINT8 data[]; <-- length in byte given by field data_len.
+*/
+} wmi_nan_cmd_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_event_hdr */
+    A_UINT32 data_len; /** length in byte of data[]. */
+/* This structure is used to send REQ binary blobs
+* from firmware to application/service where Host drv is pass through .
+* Following this structure is the TLV:
+*     A_UINT8 data[]; <-- length in byte given by field data_len.
+*/
+} wmi_nan_event_hdr;
+
+/**
+ * Event to indicate NAN discovery interface created
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_disc_iface_created_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** NAN interface MAC address */
+    wmi_mac_addr nan_interface_macaddr;
+} wmi_nan_disc_iface_created_event_fixed_param_PROTOTYPE;
+
+#define wmi_nan_disc_iface_created_event_fixed_param wmi_nan_disc_iface_created_event_fixed_param_PROTOTYPE
+
+/**
+ * Event to indicate NAN discovery interface deleted
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_disc_iface_deleted_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+} wmi_nan_disc_iface_deleted_event_fixed_param_PROTOTYPE;
+
+#define wmi_nan_disc_iface_deleted_event_fixed_param wmi_nan_disc_iface_deleted_event_fixed_param_PROTOTYPE
+
+/**
+ * Event to indicate NAN device started new cluster
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_started_cluster_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** NAN Cluster ID */
+    A_UINT32 nan_cluster_id;
+} wmi_nan_started_cluster_event_fixed_param_PROTOTYPE;
+
+#define wmi_nan_started_cluster_event_fixed_param wmi_nan_started_cluster_event_fixed_param_PROTOTYPE
+
+/**
+ * Event to indicate NAN device joined to cluster
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_joined_cluster_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** NAN Cluster ID */
+    A_UINT32 nan_cluster_id;
+} wmi_nan_joined_cluster_event_fixed_param_PROTOTYPE;
+
+#define wmi_nan_joined_cluster_event_fixed_param wmi_nan_joined_cluster_event_fixed_param_PROTOTYPE
+
+/** NAN DATA CMD's */
+
+/**
+ * NAN Data get capabilities req
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndi_get_cap_req_fixed_param */
+    A_UINT32 tlv_header;
+    /** unique id generated in upper layer for the transaction */
+    A_UINT32 transaction_id;
+} wmi_ndi_get_cap_req_fixed_param_PROTOTYPE;
+
+#define wmi_ndi_get_cap_req_fixed_param wmi_ndi_get_cap_req_fixed_param_PROTOTYPE
+
+/**
+ * NDP Response code
+ */
+typedef enum {
+    NDP_RSP_CODE_REQUEST_ACCEPT = 0x00,
+    NDP_RSP_CODE_REQUEST_REJECT = 0x01,
+    NDP_RSP_CODE_REQUEST_DEFER  = 0x02,
+} wmi_ndp_rsp_code_PROTOTYPE;
+
+#define wmi_ndp_rsp_code wmi_ndp_rsp_code_PROTOTYPE
+
+/**
+ * NDP Initiator requesting a data session
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_initiator_req_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** unique id generated in upper layer for the transaction */
+    A_UINT32 transaction_id;
+    /** Unique Instance Id identifying the Responder's service */
+    A_UINT32 service_instance_id;
+    /** Discovery MAC addr of the publisher/peer */
+    wmi_mac_addr peer_discovery_mac_addr;
+    /** Actual number of bytes in TLV ndp_cfg */
+    A_UINT32 ndp_cfg_len;
+    /** Actual number of bytes in TLV ndp_app_info */
+    A_UINT32 ndp_app_info_len;
+    /**
+     * TLV (tag length value) parameters follow the ndp_initiator_req
+     * structure. The TLV's are:
+     * wmi_channel channel;
+     * A_UINT8 ndp_cfg[];
+     * A_UINT8 ndp_app_info[];
+     */
+} wmi_ndp_initiator_req_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_initiator_req_fixed_param wmi_ndp_initiator_req_fixed_param_PROTOTYPE
+
+/**
+ * Initiate a data response on the responder side
+ * for data request indication from the peer
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_responder_req_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** unique id generated in upper layer for the transaction */
+    A_UINT32 transaction_id;
+    /**
+     * Unique token Id generated on the initiator/responder
+     * side used for a NDP session between two NAN devices
+     */
+    A_UINT32 ndp_instance_id;
+    /** Response Code defined in wmi_ndp_rsp_code */
+    A_UINT32 rsp_code;
+    /** Number of bytes in TLV ndp_cfg */
+    A_UINT32 ndp_cfg_len;
+    /** Number of bytes in TLV ndp_app_info */
+    A_UINT32 ndp_app_info_len;
+    /**
+     * TLV (tag length value) parameters follow the ndp_responder_req
+     * structure. The TLV's are:
+     * A_UINT8 ndp_cfg[];
+     * A_UINT8 ndp_app_info[];
+     */
+} wmi_ndp_responder_req_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_responder_req_fixed_param wmi_ndp_responder_req_fixed_param_PROTOTYPE
+
+/**
+ * NDP end type
+ */
+typedef enum {
+    WMI_NDP_END_TYPE_UNSPECIFIED = 0x00,
+    WMI_NDP_END_TYPE_PEER_UNAVAILABLE = 0x01,
+    WMI_NDP_END_TYPE_OTA_FRAME = 0x02,
+} wmi_ndp_end_type_PROTOTYPE;
+
+#define wmi_ndp_end_type wmi_ndp_end_type_PROTOTYPE
+
+/**
+ * NDP end reason code
+ */
+typedef enum {
+    WMI_NDP_END_REASON_UNSPECIFIED = 0x00,
+    WMI_NDP_END_REASON_INACTIVITY = 0x01,
+    WMI_NDP_END_REASON_PEER_DATA_END = 0x02,
+} wmi_ndp_end_reason_code_PROTOTYPE;
+
+#define wmi_ndp_end_reason_code wmi_ndp_end_reason_code_PROTOTYPE
+
+/**
+ * NDP end request
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_end_req */
+    A_UINT32 tlv_header;
+    /** NDP instance id */
+    A_UINT32 ndp_instance_id;
+} wmi_ndp_end_req_PROTOTYPE;
+
+#define wmi_ndp_end_req wmi_ndp_end_req_PROTOTYPE
+
+/**
+ * NDP End request
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_end_req_fixed_param */
+    A_UINT32 tlv_header;
+    /** unique id generated in upper layer for the transaction */
+    A_UINT32 transaction_id;
+    /**
+     * TLV (tag length value) parameters follow the ndp_end_req
+     * structure. The TLV's are:
+     * wmi_ndp_end_req ndp_end_req_list[];
+     */
+} wmi_ndp_end_req_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_end_req_fixed_param wmi_ndp_end_req_fixed_param_PROTOTYPE
+
+/* NAN DATA RSP EVENTS */
+
+/**
+ * Event to indicate NAN Data Interface capabilities cmd
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndi_cap_rsp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Copy of transaction_id received in wmi_ndi_get_cap_req */
+    A_UINT32 transaction_id;
+    /** Max ndi interface support */
+    A_UINT32 max_ndi_interfaces;
+    /** Max ndp sessions can support */
+    A_UINT32 max_ndp_sessions;
+    /** Max number of peer's per ndi */
+    A_UINT32 max_peers_per_ndi;
+    /** which combination of bands is supported - see NAN_DATA_SUPPORTED_BAND enums */
+    A_UINT32 nan_data_supported_bands;
+} wmi_ndi_cap_rsp_event_fixed_param_PROTOTYPE;
+
+#define wmi_ndi_cap_rsp_event_fixed_param wmi_ndi_cap_rsp_event_fixed_param_PROTOTYPE
+
+/**
+ * NDP command response code
+ */
+typedef enum {
+    NDP_CMD_RSP_STATUS_SUCCESS = 0x00,
+    NDP_CMD_RSP_STATUS_ERROR = 0x01,
+} wmi_ndp_cmd_rsp_status_PROTOTYPE;
+
+#define wmi_ndp_cmd_rsp_status wmi_ndp_cmd_rsp_status_PROTOTYPE
+
+/**
+ * Event response for wmi_ndp_initiator_req
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_initiator_rsp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** Copy of transaction_id received in wmi_ndp_initiator_req */
+    A_UINT32 transaction_id;
+    /** Response status defined in wmi_ndp_cmd_rsp_status*/
+    A_UINT32 rsp_status;
+    A_UINT32 reason_code;
+    /**
+     * Unique token Id generated on the initiator/responder
+     * side used for a NDP session between two NAN devices
+     */
+    A_UINT32 ndp_instance_id;
+} wmi_ndp_initiator_rsp_event_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_initiator_rsp_event_fixed_param wmi_ndp_initiator_rsp_event_fixed_param_PROTOTYPE
+
+/**
+ * Event response for wmi_ndp_responder_req cmd
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_responder_rsp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** Copy of transaction_id received in wmi_ndp_responder_req */
+    A_UINT32 transaction_id;
+    /** Response status defined in wmi_ndp_cmd_rsp_status*/
+    A_UINT32 rsp_status;
+    A_UINT32 reason_code;
+    /**
+     * Unique token Id generated on the initiator/responder
+     * side used for a NDP session between two NAN devices
+     */
+    A_UINT32 ndp_instance_id;
+    /** NDI mac address of the peer */
+    wmi_mac_addr peer_ndi_mac_addr;
+} wmi_ndp_responder_rsp_event_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_responder_rsp_event_fixed_param wmi_ndp_responder_rsp_event_fixed_param_PROTOTYPE
+/**
+ * Active ndp instance id
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_active_ndp_instance_id */
+    A_UINT32 tlv_header;
+    /** NDP instance id */
+    A_UINT32 ndp_instance_id;
+} wmi_active_ndp_instance_id_PROTOTYPE;
+
+#define wmi_active_ndp_instance_id wmi_active_ndp_instance_id_PROTOTYPE
+
+/**
+ * NDP end response per ndi
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_end_rsp_per_ndi */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** Peer MAC addr */
+    wmi_mac_addr peer_mac_addr;
+    /** Number of active ndps on this ndi */
+    A_UINT32 num_active_ndps_on_ndi;
+} wmi_ndp_end_rsp_per_ndi_PROTOTYPE;
+
+#define wmi_ndp_end_rsp_per_ndi wmi_ndp_end_rsp_per_ndi_PROTOTYPE
+
+/**
+ * Event response for wmi_ndp_end_req cmd
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_end_rsp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Copy of transaction_id received in wmi_ndp_end_req */
+    A_UINT32 transaction_id;
+    /** Response status defined in wmi_ndp_cmd_rsp_status*/
+    A_UINT32 rsp_status;
+    A_UINT32 reason_code;
+    /**
+     * TLV (tag length value) parameters follow the ndp_end_rsp
+     * structure. The TLV's are:
+     * wmi_ndp_end_rsp_per_ndi ndp_end_rsp_per_ndis[];
+     * wmi_active_ndp_instance_id active_ndp_instances_id[];
+     */
+} wmi_ndp_end_rsp_event_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_end_rsp_event_fixed_param wmi_ndp_end_rsp_event_fixed_param_PROTOTYPE
+
+/** NAN DATA EVENTS */
+
+/**
+ * NDP self role
+ */
+typedef enum {
+    WMI_NDP_INITIATOR_ROLE,
+    WMI_NDP_RESPONDER_ROLE,
+} wmi_ndp_self_role_PROTOTYPE;
+
+#define wmi_ndp_self_role wmi_ndp_self_role_PROTOTYPE
+
+/**
+ * NDP accept policy
+ */
+typedef enum {
+    WMI_NDP_ACCEPT_POLICY_NONE,
+    WMI_NDP_ACCEPT_POLICY_ALL,
+} wmi_ndp_accept_policy_PROTOTYPE;
+
+#define wmi_ndp_accept_policy wmi_ndp_accept_policy_PROTOTYPE
+
+/**
+ * Event indication received on the responder side when a NDP Initiator request/
+ * NDP session is initiated on the Initiator side (self role will be NDP_RESPONDER_ROLE)
+ *
+ * Event indication received on the initiator side when a
+ * NDP responder request on the Initiator side (self role will be NDP_INITIATOR_ROLE)
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_indication_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** Self NDP Role defined in wmi_ndp_self_role */
+    A_UINT32 self_ndp_role;
+    /** Accept policy defined in wmi_ndp_accept_policy */
+    A_UINT32 accept_policy;
+    /** Unique Instance Id corresponding to a service/session. */
+    A_UINT32 service_instance_id;
+    /** Discovery MAC addr of the peer/initiator */
+    wmi_mac_addr peer_discovery_mac_addr;
+    /** NDI mac address of the peer */
+    wmi_mac_addr peer_ndi_mac_addr;
+    /**
+     * Unique token Id generated on the initiator/responder
+     * side used for a NDP session between two NAN devices
+     */
+    A_UINT32 ndp_instance_id;
+    /** Number of bytes in TLV wmi_ndp_cfg */
+    A_UINT32 ndp_cfg_len;
+    /** Number of bytes in TLV wmi_ndp_app_info */
+    A_UINT32 ndp_app_info_len;
+    /**
+     * TLV (tag length value) parameters follow the ndp_indication
+     * structure. The TLV's are:
+     * A_UINT8 ndp_cfg[];
+     * A_UINT8 ndp_app_info[];
+     */
+} wmi_ndp_indication_event_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_indication_event_fixed_param wmi_ndp_indication_event_fixed_param_PROTOTYPE
+
+/**
+ * Event indication of data confirm is received on both
+ * initiator and responder side confirming a NDP session
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_confirm_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /**
+     * Unique token Id generated on the initiator/responder
+     * side used for a NDP session between two NAN devices
+     */
+    A_UINT32 ndp_instance_id;
+    /** NDI mac address of the peer (required to derive target ipv6 address) */
+    wmi_mac_addr peer_ndi_mac_addr;
+    /** Response Code defined in wmi_ndp_rsp_code */
+    A_UINT32 rsp_code;
+    /** Number of bytes in TLV wmi_ndp_cfg */
+    A_UINT32 ndp_cfg_len;
+    /** Number of bytes in TLV wmi_ndp_app_info */
+    A_UINT32 ndp_app_info_len;
+    /** Reason Code */
+    A_UINT32 reason_code;
+    /** Number of active ndps on this peer */
+    A_UINT32 num_active_ndps_on_peer;
+    /**
+     * TLV (tag length value) parameters follow the ndp_confirm
+     * structure. The TLV's are:
+     * A_UINT8 ndp_cfg[];
+     * A_UINT8 ndp_app_info[];
+     */
+} wmi_ndp_confirm_event_fixed_param_PROTOTYPE;
+
+#define wmi_ndp_confirm_event_fixed_param wmi_ndp_confirm_event_fixed_param_PROTOTYPE
+
+/**
+ * Event indication received on the initiator/responder side terminating a NDP session
+ */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ndp_end_indication */
+    A_UINT32 tlv_header;
+    /** type defined in  wmi_ndp_end_type */
+    A_UINT32 type;
+    /** Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** reason_code  defined in  wmi_ndp_end_reason_code */
+    A_UINT32 reason_code;
+    /** NDP instance id */
+    A_UINT32 ndp_instance_id;
+    /** NDI MAC addr of the peer */
+    wmi_mac_addr peer_ndi_mac_addr;
+    /** Number of active ndps on this peer */
+    A_UINT32 num_active_ndps_on_peer;
+} wmi_ndp_end_indication_PROTOTYPE;
+
+#define wmi_ndp_end_indication wmi_ndp_end_indication_PROTOTYPE
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 num_data;
+    /* followed by WMITLV_TAG_ARRAY_BYTE */
+} wmi_diag_data_container_event_fixed_param;
+
+enum {
+    WMI_PDEV_PARAM_TXPOWER_REASON_NONE = 0,
+    WMI_PDEV_PARAM_TXPOWER_REASON_SAR,
+    WMI_PDEV_PARAM_TXPOWER_REASON_MAX
+};
+
+#define PDEV_PARAM_TXPOWER_VALUE_MASK  0x000000FF
+#define PDEV_PARAM_TXPOWER_VALUE_SHIFT 0
+
+#define PDEV_PARAM_TXPOWER_REASON_MASK  0x0000FF00
+#define PDEV_PARAM_TXPOWER_REASON_SHIFT 8
+
+#define SET_PDEV_PARAM_TXPOWER_VALUE(txpower_param, value)     \
+    ((txpower_param) &= ~PDEV_PARAM_TXPOWER_VALUE_MASK, (txpower_param) |= ((value) << PDEV_PARAM_TXPOWER_VALUE_SHIFT))
+
+#define SET_PDEV_PARAM_TXPOWER_REASON(txpower_param, value)     \
+    ((txpower_param) &= ~PDEV_PARAM_TXPOWER_REASON_MASK, (txpower_param) |= ((value) << PDEV_PARAM_TXPOWER_REASON_SHIFT))
+
+#define GET_PDEV_PARAM_TXPOWER_VALUE(txpower_param)     \
+    (((txpower_param) & PDEV_PARAM_TXPOWER_VALUE_MASK) >> PDEV_PARAM_TXPOWER_VALUE_SHIFT)
+
+#define GET_PDEV_PARAM_TXPOWER_REASON(txpower_param)     \
+    (((txpower_param) & PDEV_PARAM_TXPOWER_REASON_MASK) >> PDEV_PARAM_TXPOWER_REASON_SHIFT)
+
+/**
+ * This command is sent from WLAN host driver to firmware to
+ * notify the current modem power state. Host would receive a
+ * message from modem when modem is powered on. Host driver
+ * would then send this command to firmware. Firmware would then
+ * power on WCI-2 (UART) interface for LTE/MWS Coex.
+ *
+ * This command is only applicable for APQ platform which has
+ * modem on the platform. If firmware doesn't support MWS Coex,
+ * this command can be dropped by firmware.
+ *
+ * This is a requirement from modem team that WCN can't toggle
+ * UART before modem is powered on.
+ */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_modem_power_state_cmd_param */
+    A_UINT32 tlv_header;
+
+    /** Modem power state parameter */
+    A_UINT32 modem_power_state;
+} wmi_modem_power_state_cmd_param;
+
+enum {
+    WMI_MODEM_STATE_OFF = 0,
+    WMI_MODEM_STATE_ON
+};
+
+
+#define WMI_ROAM_AUTH_STATUS_CONNECTED       0x1 /** connected, but not authenticated */
+#define WMI_ROAM_AUTH_STATUS_AUTHENTICATED   0x2 /** connected and authenticated */
+
+/** WMI_ROAM_SYNCH_EVENT: roam synch event triggering the host propagation logic
+    generated whenever firmware roamed to new AP silently and
+    (a) If the host is awake, FW sends the event to the host immediately .
+    (b) If host is in sleep then either
+        (1) FW waits until  host sends WMI_PDEV_RESUME_CMDID or WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID
+    command to FW (part of host wake up sequence  from low power mode) before sending the event host.
+        (2) data/mgmt frame is received from roamed AP, which needs to return to host
+*/
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_key_material */
+    A_UINT32 tlv_header;
+
+	A_UINT8  kck[GTK_OFFLOAD_KCK_BYTES]; /* EAPOL-Key Key Confirmation Key (KCK) */
+	A_UINT8  kek[GTK_OFFLOAD_KEK_BYTES]; /* EAPOL-Key Key Encryption Key (KEK) */
+    A_UINT8  replay_counter[GTK_REPLAY_COUNTER_BYTES];
+} wmi_key_material;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_synch_event_fixed_param  */
+    /** Unique id identifying the VDEV on which roaming is done by firmware */
+    A_UINT32 vdev_id;
+    /** auth_status: connected or authorized */
+    A_UINT32 auth_status;
+    /** roam_reason:
+     * bits 0-3 for roam reason   see WMI_ROAM_REASON_XXX
+     * bits 4-5 for subnet status see WMI_ROAM_SUBNET_CHANGE_STATUS_XXX.
+     */
+    A_UINT32 roam_reason;
+    /** associated AP's rssi calculated by FW when reason code is WMI_ROAM_REASON_LOW_RSSI. not valid if roam_reason is BMISS */
+    A_UINT32 rssi;
+    /** MAC address of roamed AP */
+    wmi_mac_addr bssid;     /* BSSID */
+    /** whether the frame is beacon or probe rsp */
+    A_UINT32 is_beacon;
+    /** the length of beacon/probe rsp */
+    A_UINT32 bcn_probe_rsp_len;
+    /** the length of reassoc rsp */
+    A_UINT32 reassoc_rsp_len;
+    /** the length of reassoc req */
+    A_UINT32 reassoc_req_len;
+    /**
+     * TLV (tag length value) parameters follows roam_synch_event
+     * The TLV's are:
+     *     A_UINT8 bcn_probe_rsp_frame[];  length identified by bcn_probe_rsp_len
+     *     A_UINT8 reassoc_rsp_frame[];  length identified by reassoc_rsp_len
+     *     wmi_channel chan;
+     *     wmi_key_material key;
+     *     A_UINT32 status; subnet changed status not being used currently.
+     *         will pass the information using roam_status.
+     *     A_UINT8 reassoc_req_frame[];  length identified by reassoc_req_len
+     *
+     **/
+} wmi_roam_synch_event_fixed_param;
+
+#define WMI_PEER_ESTIMATED_LINKSPEED_INVALID    0xFFFFFFFF
+
+typedef struct {
+    /* TLV tag and len; tag equals WMITLV_TAG_STRUC_ wmi_peer_get_estimated_linkspeed_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** MAC address of the peer for which the estimated link speed is required. */
+    wmi_mac_addr peer_macaddr;
+    /* Set to 1 only if vdev_id field is valid */
+    A_UINT32 valid_vdev_id;
+    /* VDEV to which the peer belongs to */
+    A_UINT32 vdev_id;
+} wmi_peer_get_estimated_linkspeed_cmd_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals WMITLV_TAG_STRUC_ wmi_peer_estimated_linkspeed_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** MAC address of the peer for which the estimated link speed is required.
+     */
+    wmi_mac_addr peer_macaddr;
+  /* Estimated link speed in kbps.
+   * When est_linkspeed_kbps is not valid, the value is set to WMI_PEER_ESTIMATED_LINKSPEED_INVALID.
+   */
+    A_UINT32 est_linkspeed_kbps;
+    /* Set to 1 only if vdev_id field is valid */
+    A_UINT32 valid_vdev_id;
+    /* VDEV to which the peer belongs to */
+    A_UINT32 vdev_id;
+} wmi_peer_estimated_linkspeed_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals */
+    /* vdev ID */
+    A_UINT32 vdev_id;
+    A_UINT32 data_len; /** length in byte of data[]. */
+    /* This structure is used to send REQ binary blobs
+* from application/service to firmware where Host drv is pass through .
+* Following this structure is the TLV:
+*     A_UINT8 data[]; <-- length in byte given by field data_len.
+*/
+} wmi_req_stats_ext_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stats1_event_fix_param */
+    A_UINT32 vdev_id; /** vdev ID */
+    A_UINT32 data_len; /** length in byte of data[]. */
+    /* This structure is used to send REQ binary blobs
+     * from firmware to application/service where Host drv is pass through .
+     * Following this structure is the TLV:
+     *     A_UINT8 data[]; <-- length in byte given by field data_len.
+     */
+} wmi_stats_ext_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_delete_resp_event_fixed_param  */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_peer_delete_resp_event_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals WMITLV_TAG_STRUC_ wmi_peer_state_event_fixed_param */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id; /* vdev ID */
+    /* MAC address of the peer for which the estimated link speed is required.*/
+    wmi_mac_addr peer_macaddr;
+    A_UINT32 state; /* peer state */
+} wmi_peer_state_event_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_assoc_conf_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* peer MAC address */
+    wmi_mac_addr peer_macaddr;
+} wmi_peer_assoc_conf_event_fixed_param;
+
+enum {
+    WMI_2G4_HT40_OBSS_SCAN_PASSIVE = 0,    /** scan_type: passive */
+    WMI_2G4_HT40_OBSS_SCAN_ACTIVE, /** scan_type: active */
+};
+
+typedef struct {
+    /**
+     * TLV tag and len;
+     * tag equals WMITLV_TAG_STRUC_wmi_obss_scan_enalbe_cmd_fixed_param
+     */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    /**
+     * active or passive. if active all the channels are actively scanned.
+     *  if passive then all the channels are passively scanned
+     */
+    A_UINT32 scan_type;
+    /**
+     * FW can perform multiple scans with in a  OBSS scan interval.
+     * For each scan,
+     *  if the scan is passive then obss_scan_passive_dwell is minimum dwell to be used for each channel  ,
+     *  if the scan is active then obss_scan_active_dwell is minimum dwell to be used for each channel .
+     *   The unit for these 2 parameters is TUs.
+     */
+    A_UINT32 obss_scan_passive_dwell;
+    A_UINT32 obss_scan_active_dwell;
+    /**
+     * OBSS scan interval . FW needs to perform one or more OBSS scans within this interval and fulfill the
+     *  both min and total per channel dwell time requirement
+     */
+    A_UINT32 bss_channel_width_trigger_scan_interval;
+    /**
+     * FW can perform multiple scans with in a  OBSS scan interval.
+     * For each scan,
+     * the total per channel dwell time across all scans with in OBSS scan interval should be
+     * atleast obss_scan_passive_total_per channel for passive scas and obss_scan_active_total_per channel
+     * for active scans and ,
+     *   The unit for these 2 parameters is TUs.
+     */
+    A_UINT32 obss_scan_passive_total_per_channel;
+    A_UINT32 obss_scan_active_total_per_channel;
+    A_UINT32 bss_width_channel_transition_delay_factor; /** parameter to check exemption from scan */
+    A_UINT32 obss_scan_activity_threshold; /** parameter to check exemption from scan */
+    /** following two parameters used by FW to fill IEs when sending 20/40 coexistence action frame to AP */
+    A_UINT32 forty_mhz_intolerant; /** STA 40M bandwidth intolerant capability */
+    A_UINT32 current_operating_class; /** STA current operating class */
+    /** length of 2.4GHz channel list to scan at, channel list in tlv->channels[] */
+    A_UINT32 channel_len;
+    /** length of optional ie data to append to probe reqest when active scan, ie data in tlv->ie_field[] */
+    A_UINT32 ie_len;
+} wmi_obss_scan_enable_cmd_fixed_param;
+
+typedef struct {
+    /**
+    * TLV tag and len;
+    * tag equals WMITLV_TAG_STRUC_wmi_obss_scan_disalbe_cmd_fixed_param
+    */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+} wmi_obss_scan_disable_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_offload_prb_rsp_tx_status_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /** prb rsp tx status, values defined in enum WMI_FRAME_TX_STATUS */
+    A_UINT32 tx_status;
+} wmi_offload_prb_rsp_tx_status_event_fixed_param;
+
+typedef enum {
+    WMI_FRAME_TX_OK,            /* frame tx ok */
+    WMI_FRAME_TX_XRETRY,        /* excessivley retried */
+    WMI_FRAME_TX_DROP,          /* frame dropped by FW due to resources */
+    WMI_FRAME_TX_FILTERED,      /* frame filtered by hardware */
+} WMI_FRAME_TX_STATUS;
+
+/**
+ * This command is sent from WLAN host driver to firmware to
+ * request firmware to send the latest channel avoidance range
+ * to host.
+ *
+ * This command is only applicable for APQ platform which has
+ * modem on the platform. If firmware doesn't support MWS Coex,
+ * this command can be dropped by firmware.
+ *
+ * Host would send this command to firmware to request a channel
+ * avoidance information update.
+ */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_chan_avoid_update_cmd_param */
+    A_UINT32 tlv_header;
+} wmi_chan_avoid_update_cmd_param;
+
+/* ExtScan operation mode */
+typedef enum {
+   WMI_EXTSCAN_MODE_NONE          = 0x0000,
+   WMI_EXTSCAN_MODE_START         = 0x0001, /* ExtScan/TableMonitoring operation started */
+   WMI_EXTSCAN_MODE_STOP          = 0x0002, /* ExtScan/TableMonitoring operation stopped */
+   WMI_EXTSCAN_MODE_IGNORED       = 0x0003, /* ExtScan command ignored due to error */
+} wmi_extscan_operation_mode;
+
+/* Channel Mask */
+typedef enum {
+   WMI_CHANNEL_BAND_UNSPECIFIED = 0x0000,
+   WMI_CHANNEL_BAND_24          = 0x0001, /* 2.4 channel */
+   WMI_CHANNEL_BAND_5_NON_DFS   = 0x0002, /* 5G Channels (No DFS channels) */
+   WMI_CHANNEL_BAND_DFS         = 0x0004, /* DFS channels */
+} wmi_channel_band_mask;
+
+typedef enum {
+    WMI_EXTSCAN_CYCLE_STARTED_EVENT     = 0x0001,
+    WMI_EXTSCAN_CYCLE_COMPLETED_EVENT   = 0x0002,
+    WMI_EXTSCAN_BUCKET_STARTED_EVENT    = 0x0004,
+    WMI_EXTSCAN_BUCKET_COMPLETED_EVENT  = 0x0008,
+    WMI_EXTSCAN_BUCKET_FAILED_EVENT     = 0x0010,
+    WMI_EXTSCAN_BUCKET_OVERRUN_EVENT    = 0x0020,
+    WMI_EXTSCAN_THRESHOLD_NUM_SCANS     = 0x0040,
+    WMI_EXTSCAN_THRESHOLD_PERCENT       = 0x0080,
+
+    WMI_EXTSCAN_EVENT_MAX               = 0x8000
+} wmi_extscan_event_type;
+
+#define WMI_EXTSCAN_CYCLE_EVENTS_MASK    (WMI_EXTSCAN_CYCLE_STARTED_EVENT   | \
+                                          WMI_EXTSCAN_CYCLE_COMPLETED_EVENT)
+
+#define WMI_EXTSCAN_BUCKET_EVENTS_MASK   (WMI_EXTSCAN_BUCKET_STARTED_EVENT   | \
+                                          WMI_EXTSCAN_BUCKET_COMPLETED_EVENT | \
+                                          WMI_EXTSCAN_BUCKET_FAILED_EVENT    | \
+                                          WMI_EXTSCAN_BUCKET_OVERRUN_EVENT)
+
+typedef enum {
+    WMI_EXTSCAN_NO_FORWARDING         = 0x0000,
+    WMI_EXTSCAN_FORWARD_FRAME_TO_HOST = 0x0001
+} wmi_extscan_forwarding_flags;
+
+typedef enum {
+    WMI_EXTSCAN_USE_MSD                 = 0x0001,    /* Use Motion Sensor Detection */
+    WMI_EXTSCAN_EXTENDED_BATCHING_EN    = 0x0002,    /* Extscan LPASS extended batching feature is supported and enabled */
+} wmi_extscan_configuration_flags;
+
+typedef enum {
+    WMI_EXTSCAN_BUCKET_CACHE_RESULTS     = 0x0001,   /* Cache the results of bucket whose configuration flags has this bit set */
+    WMI_EXTSCAN_REPORT_EVENT_CONTEXT_HUB = 0x0002,   /* Report ext scan results to context hub or not. */
+} wmi_extscan_bucket_configuration_flags;
+
+typedef enum {
+    WMI_EXTSCAN_STATUS_OK    = 0,
+    WMI_EXTSCAN_STATUS_ERROR = 0x80000000,
+    WMI_EXTSCAN_STATUS_INVALID_PARAMETERS,
+    WMI_EXTSCAN_STATUS_INTERNAL_ERROR
+} wmi_extscan_start_stop_status;
+
+typedef struct {
+    /** Request ID - to identify command. Cannot be 0 */
+    A_UINT32     request_id;
+    /** Requestor ID - client requesting ExtScan */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32     vdev_id;
+} wmi_extscan_command_id;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /** channel number */
+    A_UINT32    channel;
+
+    /** dwell time in msec - use defaults if 0 */
+    A_UINT32    min_dwell_time;
+    A_UINT32    max_dwell_time;
+
+    /** passive/active channel and other flags */
+    A_UINT32    control_flags;                        /* 0 => active, 1 => passive scan; ignored for DFS */
+} wmi_extscan_bucket_channel;
+
+/* Scan Bucket specification */
+typedef struct {
+    A_UINT32        tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /** Bucket ID  - 0-based */
+    A_UINT32        bucket_id;
+    /** ExtScan events subscription - events to be reported to client (see wmi_extscan_event_type) */
+    A_UINT32        notify_extscan_events;
+    /** Options to forward scan results - see wmi_extscan_forwarding_flags */
+    A_UINT32        forwarding_flags;
+    /** ExtScan configuration flags - wmi_extscan_bucket_configuration_flags */
+    A_UINT32        configuration_flags;
+    /** DEPRECATED member: multiplier to be applied to the periodic scan's base period */
+    A_UINT32        base_period_multiplier;
+    /** dwell time in msec on active channels - use defaults if 0 */
+    A_UINT32        min_dwell_time_active;
+    A_UINT32        max_dwell_time_active;
+    /** dwell time in msec on passive channels - use defaults if 0 */
+    A_UINT32        min_dwell_time_passive;
+    A_UINT32        max_dwell_time_passive;
+    /** see wmi_channel_band_mask; when equal to WMI_CHANNEL_UNSPECIFIED, use channel list */
+    A_UINT32        channel_band;
+    /** number of channels (if channel_band is WMI_CHANNEL_UNSPECIFIED) */
+    A_UINT32        num_channels;
+    /** scan period upon start or restart of the bucket - periodicity of the bucket to begin with */
+    A_UINT32        min_period;
+    /** period above which exponent is not applied anymore */
+    A_UINT32        max_period;
+    /** back off value to be applied to bucket's periodicity after exp_max_step_count scan cycles
+      * new_bucket_period = last_bucket_period + last_exponent_period * exp_backoff
+      */
+    A_UINT32        exp_backoff;
+    /** number of scans performed at a given periodicity after which exponential back off value is
+       * applied to current periodicity to obtain a newer one
+       */
+    A_UINT32        exp_max_step_count;
+/** Followed by the variable length TLV chan_list:
+ *  wmi_extscan_bucket_channel chan_list[] */
+} wmi_extscan_bucket;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_start_cmd_fixed_param */
+    /** Request ID - to identify command. Cannot be 0 */
+    A_UINT32     request_id;
+    /** Requestor ID - client requesting ExtScan */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32     vdev_id;
+    /** table ID - to allow support for multiple simultaneous requests */
+    A_UINT32     table_id;
+    /** Base period (milliseconds) used by scan buckets to define periodicity of the scans */
+    A_UINT32     base_period;
+    /** Maximum number of iterations to run - one iteration is the scanning of the least frequent bucket */
+    A_UINT32     max_iterations;
+    /** Options to forward scan results - see wmi_extscan_forwarding_flags */
+    A_UINT32     forwarding_flags;
+    /** ExtScan configuration flags - wmi_extscan_configuration_flags */
+    A_UINT32     configuration_flags;
+    /** ExtScan events subscription - bitmask indicating which events should be send to client (see wmi_extscan_event_type) */
+    A_UINT32     notify_extscan_events;
+    /** Scan Priority, input to scan scheduler */
+    A_UINT32     scan_priority;
+    /** Maximum number of BSSIDs to cache on each scan cycle */
+    A_UINT32     max_bssids_per_scan_cycle;
+    /** Minimum RSSI value to report */
+    A_UINT32     min_rssi;
+    /** Maximum table usage in percentage */
+    A_UINT32     max_table_usage;
+    /** default dwell time in msec on active channels */
+    A_UINT32     min_dwell_time_active;
+    A_UINT32     max_dwell_time_active;
+    /** default dwell time in msec on passive channels */
+    A_UINT32     min_dwell_time_passive;
+    A_UINT32     max_dwell_time_passive;
+    /** min time in msec on the BSS channel,only valid if atleast one VDEV is active*/
+    A_UINT32     min_rest_time;
+    /** max rest time in msec on the BSS channel,only valid if at least one VDEV is active*/
+    /** the scanner will rest on the bss channel at least min_rest_time. after min_rest_time the scanner
+     *  will start checking for tx/rx activity on all VDEVs. if there is no activity the scanner will
+     *  switch to off channel. if there is activity the scanner will let the radio on the bss channel
+     *  until max_rest_time expires.at max_rest_time scanner will switch to off channel
+     *  irrespective of activity. activity is determined by the idle_time parameter.
+     */
+    A_UINT32     max_rest_time;
+    /** time before sending next set of probe requests.
+     *   The scanner keeps repeating probe requests transmission with period specified by repeat_probe_time.
+     *   The number of probe requests specified depends on the ssid_list and bssid_list
+     */
+    /** Max number of probes to be sent */
+    A_UINT32     n_probes;
+    /** time in msec between 2 sets of probe requests. */
+    A_UINT32     repeat_probe_time;
+    /** time in msec between 2 consequetive probe requests with in a set. */
+    A_UINT32     probe_spacing_time;
+    /** data inactivity time in msec on bss channel that will be used by scanner for measuring the inactivity  */
+    A_UINT32     idle_time;
+    /** maximum time in msec allowed for scan  */
+    A_UINT32     max_scan_time;
+    /** delay in msec before sending first probe request after switching to a channel */
+    A_UINT32     probe_delay;
+    /** Scan control flags */
+    A_UINT32     scan_ctrl_flags;
+    /** Burst duration time in msec*/
+    A_UINT32     burst_duration;
+
+    /** number of bssids in the TLV bssid_list[] */
+    A_UINT32     num_bssid;
+    /** number of ssid in the TLV ssid_list[] */
+    A_UINT32     num_ssids;
+    /** number of bytes in TLV ie_data[] */
+    A_UINT32     ie_len;
+    /** number of buckets in the TLV bucket_list[] */
+    A_UINT32     num_buckets;
+    /** in number of scans, send notifications to host after these many scans */
+    A_UINT32    report_threshold_num_scans;
+    /** number of channels in channel_list[] determined by the
+        sum of wmi_extscan_bucket.num_channels in array  */
+
+/**
+ * TLV (tag length value) parameters follow the extscan_cmd
+ * structure. The TLV's are:
+ *     wmi_ssid                   ssid_list[];
+ *     wmi_mac_addr               bssid_list[];
+ *     A_UINT8                    ie_data[];
+ *     wmi_extscan_bucket         bucket_list[];
+ *     wmi_extscan_bucket_channel channel_list[];
+ */
+} wmi_extscan_start_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_stop_cmd_fixed_param */
+    /** Request ID - to match running command. 0 matches any request */
+    A_UINT32     request_id;
+    /** Requestor ID - client requesting stop */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32     vdev_id;
+    /** table ID - to allow support for multiple simultaneous requests */
+    A_UINT32     table_id;
+} wmi_extscan_stop_cmd_fixed_param;
+
+enum wmi_extscan_get_cached_results_flags {
+    WMI_EXTSCAN_GET_CACHED_RESULTS_FLAG_NONE        = 0x0000,
+    WMI_EXTSCAN_GET_CACHED_RESULTS_FLAG_FLUSH_TABLE = 0x0001
+};
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_get_cached_results_cmd_fixed_param */
+    /** request ID - used to correlate command with events */
+    A_UINT32    request_id;
+    /** Requestor ID - client that requested results */
+    A_UINT32    requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32    vdev_id;
+    /** table ID - to allow support for multiple simultaneous requests */
+    A_UINT32    table_id;
+    /** maximum number of results to be returned  */
+    A_UINT32    max_results;
+    /** flush BSSID list - wmi_extscan_get_cached_results_flags */
+    A_UINT32    control_flags; /* enum wmi_extscan_get_cached_results_flags */
+} wmi_extscan_get_cached_results_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_get_wlan_change_results_cmd_fixed_param */
+    /** request ID - used to correlate command with events */
+    A_UINT32    request_id;
+    /** Requestor ID - client that requested results */
+    A_UINT32    requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32    vdev_id;
+    /** table ID - to allow support for multiple simultaneous requests */
+    A_UINT32    table_id;
+} wmi_extscan_get_wlan_change_results_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32        tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /**bssid */
+    wmi_mac_addr    bssid;
+    /**channel number */
+    A_UINT32        channel;
+    /**upper RSSI limit */
+    A_UINT32        upper_rssi_limit;
+    /**lower RSSI limit */
+    A_UINT32        lower_rssi_limit;
+} wmi_extscan_wlan_change_bssid_param;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param */
+    /** Request ID - to identify command. Cannot be 0 */
+    A_UINT32    request_id;
+    /** Requestor ID - client requesting wlan change monitoring */
+    A_UINT32    requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32    vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32    table_id;
+    /** operation mode: start/stop */
+    A_UINT32    mode; /* wmi_extscan_operation_mode */
+    /** number of rssi samples to store */
+    A_UINT32    max_rssi_samples;
+    /** number of samples to use to calculate RSSI average */
+    A_UINT32    rssi_averaging_samples;
+    /** number of scans to confirm loss of contact with RSSI */
+    A_UINT32    lost_ap_scan_count;
+    /** number of out-of-range BSSIDs necessary to send event */
+    A_UINT32    max_out_of_range_count;
+
+    /** total number of bssid signal descriptors (in all pages) */
+    A_UINT32    total_entries;
+    /** index of the first bssid entry found in the TLV wlan_change_descriptor_list*/
+    A_UINT32    first_entry_index;
+    /** number of bssid signal descriptors in this page */
+    A_UINT32    num_entries_in_page;
+/* Following this structure is the TLV:
+ *     wmi_extscan_wlan_change_bssid_param wlan_change_descriptor_list[];
+ *         (number of elements given by field num_page_entries)
+ */
+} wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32        tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /**bssid */
+    wmi_mac_addr    bssid;
+    /**RSSI min threshold for reporting */
+    A_UINT32        min_rssi;
+    /**Deprecated entry - channel number */
+    A_UINT32        channel;
+    /** RSSI max threshold for reporting */
+    A_UINT32        max_rssi;
+} wmi_extscan_hotlist_entry;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_monitor_cmd_fixed_param */
+    /** Request ID - to identify command. Cannot be 0 */
+    A_UINT32    request_id;
+    /** Requestor ID - client requesting hotlist monitoring */
+    A_UINT32    requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32    vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32    table_id;
+    /** operation mode: start/stop */
+    A_UINT32    mode;    /* wmi_extscan_operation_mode */
+    /** total number of bssids (in all pages) */
+    A_UINT32    total_entries;
+    /** index of the first bssid entry found in the TLV wmi_extscan_hotlist_entry */
+    A_UINT32    first_entry_index;
+    /** number of bssids in this page */
+    A_UINT32    num_entries_in_page;
+    /** number of consecutive scans to confirm loss of contact with AP */
+    A_UINT32    lost_ap_scan_count;
+/* Following this structure is the TLV:
+ *     wmi_extscan_hotlist_entry hotlist[]; <-- number of elements given by field num_page_entries.
+ */
+} wmi_extscan_configure_hotlist_monitor_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32        tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /**ssid */
+    wmi_ssid        ssid;
+    /**band */
+    A_UINT32        band;
+    /**RSSI threshold for reporting */
+    A_UINT32        min_rssi;
+    A_UINT32        max_rssi;
+} wmi_extscan_hotlist_ssid_entry;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_ssid_monitor_cmd_fixed_param */
+    /** Request ID - to identify command. Cannot be 0 */
+    A_UINT32    request_id;
+    /** Requestor ID - client requesting hotlist ssid monitoring */
+    A_UINT32    requestor_id;
+    /** VDEV id(interface) that is requesting scan */
+    A_UINT32    vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32    table_id;
+    /** operation mode: start/stop */
+    A_UINT32    mode; /* wmi_extscan_operation_mode */
+    /**total number of ssids (in all pages) */
+    A_UINT32    total_entries;
+    /**index of the first ssid entry found in the TLV wmi_extscan_hotlist_ssid_entry*/
+    A_UINT32    first_entry_index;
+    /**number of ssids in this page */
+    A_UINT32    num_entries_in_page;
+	/** number of consecutive scans to confirm loss of an ssid **/
+	A_UINT32    lost_ap_scan_count;
+    /* Following this structure is the TLV:
+     *     wmi_extscan_hotlist_ssid_entry hotlist_ssid[]; <-- number of elements given by field num_page_entries.
+     */
+} wmi_extscan_configure_hotlist_ssid_monitor_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32    table_id;
+    /** size in bytes of scan cache entry */
+    A_UINT32    scan_cache_entry_size;
+    /** maximum number of scan cache entries */
+    A_UINT32    max_scan_cache_entries;
+    /** maximum number of buckets per extscan request */
+    A_UINT32    max_buckets;
+    /** maximum number of BSSIDs that will be stored in each scan (best n/w as per RSSI) */
+    A_UINT32    max_bssid_per_scan;
+    /** table usage level at which indication must be sent to host */
+    A_UINT32    max_table_usage_threshold;
+} wmi_extscan_cache_capabilities;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32    table_id;
+    /** size in bytes of wlan change entry */
+    A_UINT32    wlan_change_entry_size;
+    /** maximum number of entries in wlan change table */
+    A_UINT32    max_wlan_change_entries;
+    /** number of RSSI samples used for averaging RSSI */
+    A_UINT32    max_rssi_averaging_samples;
+    /** number of BSSID/RSSI entries (BSSID pointer, RSSI, timestamp) that device can hold */
+    A_UINT32    max_rssi_history_entries;
+} wmi_extscan_wlan_change_monitor_capabilities;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32    table_id;
+    /** size in bytes of hotlist entry */
+    A_UINT32    wlan_hotlist_entry_size;
+    /** maximum number of entries in wlan change table */
+    A_UINT32    max_hotlist_entries;
+} wmi_extscan_hotlist_monitor_capabilities;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_set_capabilities_cmd_fixed_param */
+    /** Request ID - matches request ID used to start hot list monitoring */
+    A_UINT32    request_id;
+    /** Requestor ID - client requesting stop */
+    A_UINT32    requestor_id;
+    /** number of extscan caches */
+    A_UINT32    num_extscan_cache_tables;
+    /** number of wlan change lists */
+    A_UINT32    num_wlan_change_monitor_tables;
+    /** number of hotlists */
+    A_UINT32    num_hotlist_monitor_tables;
+    /** if one sided rtt data collection is supported */
+    A_UINT32    rtt_one_sided_supported;
+    /** if 11v data collection is supported */
+    A_UINT32    rtt_11v_supported;
+    /** if 11mc data collection is supported */
+    A_UINT32    rtt_ftm_supported;
+    /** number of extscan cache capabilities (one per table)  */
+    A_UINT32    num_extscan_cache_capabilities;
+    /** number of wlan change  capabilities (one per table)  */
+    A_UINT32    num_extscan_wlan_change_capabilities;
+    /** number of extscan hotlist capabilities (one per table)  */
+    A_UINT32    num_extscan_hotlist_capabilities;
+/* Following this structure is the TLV:
+ *     wmi_extscan_cache_capabilities               extscan_cache_capabilities; <-- number of capabilities given by num_extscan_caches
+ *     wmi_extscan_wlan_change_monitor_capabilities wlan_change_capabilities;   <-- number of capabilities given by num_wlan_change_monitor_tables
+ *     wmi_extscan_hotlist_monitor_capabilities     hotlist_capabilities;       <-- number of capabilities given by num_hotlist_monitor_tables
+ */
+} wmi_extscan_set_capabilities_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_get_capabilities_cmd_fixed_param */
+    /** Request ID - matches request ID used to start hot list monitoring */
+    A_UINT32    request_id;
+    /** Requestor ID - client requesting capabilities */
+    A_UINT32    requestor_id;
+} wmi_extscan_get_capabilities_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_start_stop_event_fixed_param */
+    /** Request ID of the operation that was started/stopped */
+    A_UINT32     request_id;
+    /** Requestor ID of the operation that was started/stopped */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) of the operation that was started/stopped */
+    A_UINT32     vdev_id;
+    /** extscan WMI command */
+    A_UINT32     command;
+    /** operation mode: start/stop */
+    A_UINT32     mode; /* wmi_extscan_operation_mode */
+    /**success/failure */
+    A_UINT32     status; /* enum wmi_extscan_start_stop_status */
+    /** table ID - to allow support for multiple simultaneous requests */
+    A_UINT32     table_id;
+} wmi_extscan_start_stop_event_fixed_param;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_operation_event_fixed_param */
+    /** Request ID of the extscan operation that is currently running */
+    A_UINT32     request_id;
+    /** Requestor ID of the extscan operation that is currently running */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) of the extscan operation that is currently running */
+    A_UINT32     vdev_id;
+    /** scan event (wmi_scan_event_type) */
+    A_UINT32     event; /* wmi_extscan_event_type */
+    /** table ID - to allow support for multiple simultaneous requests */
+    A_UINT32     table_id;
+    /**number of buckets */
+    A_UINT32     num_buckets;
+    /* Following this structure is the TLV:
+     *     A_UINT32    bucket_id[]; <-- number of elements given by field num_buckets.
+     */
+} wmi_extscan_operation_event_fixed_param;
+
+/* Types of extscan tables */
+typedef enum {
+    EXTSCAN_TABLE_NONE    = 0,
+    EXTSCAN_TABLE_BSSID   = 1,
+    EXTSCAN_TABLE_RSSI    = 2,
+} wmi_extscan_table_type;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_table_usage_event_fixed_param */
+    /** Request ID of the extscan operation that is currently running */
+    A_UINT32     request_id;
+    /** Requestor ID of the extscan operation that is currently running */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) of the extscan operation that is currently running */
+    A_UINT32     vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32     table_id;
+    /**see wmi_extscan_table_type for table reporting usage */
+    A_UINT32     table_type;
+    /**number of entries in use */
+    A_UINT32     entries_in_use;
+    /**maximum number of entries in table */
+    A_UINT32     maximum_entries;
+} wmi_extscan_table_usage_event_fixed_param;
+
+typedef enum {
+    WMI_SCAN_STATUS_INTERRUPTED = 1      /* Indicates scan got interrupted i.e. aborted or pre-empted for a long time (> 1sec)
+                                            this can be used to discard scan results */
+} wmi_scan_status_flags;
+
+typedef struct {
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /** RSSI */
+    A_UINT32    rssi;
+    /** time stamp in milliseconds */
+    A_UINT32    tstamp;
+    /** Extscan cycle during which this entry was scanned */
+    A_UINT32    scan_cycle_id;
+    /** flag to indicate if the given result was obtained as part of interrupted (aborted/large time gap preempted) scan */
+    A_UINT32    flags;
+    /** Bitmask of buckets (i.e. sets of channels) scanned */
+    A_UINT32    buckets_scanned;
+} wmi_extscan_rssi_info;
+
+typedef struct {
+    A_UINT32        tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /**bssid */
+    wmi_mac_addr    bssid;
+    /**ssid */
+    wmi_ssid        ssid;
+    /**channel number */
+    A_UINT32        channel;
+    /* capabilities */
+    A_UINT32        capabilities;
+    /* beacon interval in TUs */
+    A_UINT32        beacon_interval;
+    /**time stamp in milliseconds - time last seen */
+    A_UINT32        tstamp;
+    /**flags - _tExtScanEntryFlags */
+    A_UINT32        flags;
+    /**RTT in ns */
+    A_UINT32        rtt;
+    /**rtt standard deviation */
+    A_UINT32        rtt_sd;
+    /* rssi information */
+    A_UINT32        number_rssi_samples;
+    /** IE length */
+    A_UINT32        ie_length; /* length of IE data */
+} wmi_extscan_wlan_descriptor;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_cached_results_event_fixed_param */
+    /** Request ID of the WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID */
+    A_UINT32     request_id;
+    /** Requestor ID of the WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) of the WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID */
+    A_UINT32     vdev_id;
+    /** Request ID of the extscan operation that is currently running */
+    A_UINT32     extscan_request_id;
+    /** Requestor ID of the extscan operation that is currently running */
+    A_UINT32     extscan_requestor_id;
+    /** VDEV id(interface) of the extscan operation that is currently running */
+    A_UINT32     extscan_vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32     table_id;
+    /**current time stamp in seconds. Used to provide a baseline for the relative timestamps returned for each block and entry */
+    A_UINT32     current_tstamp;
+    /**total number of bssids (in all pages) */
+    A_UINT32     total_entries;
+    /**index of the first bssid entry found in the TLV wmi_extscan_wlan_descriptor*/
+    A_UINT32     first_entry_index;
+    /**number of bssids in this page */
+    A_UINT32     num_entries_in_page;
+    /** number of buckets scanned**/
+    A_UINT32     buckets_scanned;
+    /* Followed by the variable length TLVs
+     *     wmi_extscan_wlan_descriptor    bssid_list[]
+     *     wmi_extscan_rssi_info          rssi_list[]
+     *     A_UINT8                        ie_list[]
+     */
+} wmi_extscan_cached_results_event_fixed_param;
+
+typedef enum {
+    EXTSCAN_WLAN_CHANGE_FLAG_NONE         = 0x00,
+    EXTSCAN_WLAN_CHANGE_FLAG_OUT_OF_RANGE = 0x01,
+    EXTSCAN_WLAN_CHANGE_FLAG_AP_LOST      = 0x02,
+} wmi_extscan_wlan_change_flags;
+
+typedef struct {
+    A_UINT32        tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */
+    /**bssid */
+    wmi_mac_addr    bssid;
+    /**time stamp in milliseconds */
+    A_UINT32        tstamp;
+    /**upper RSSI limit */
+    A_UINT32        upper_rssi_limit;
+    /**lower RSSI limit */
+    A_UINT32        lower_rssi_limit;
+    /** channel */
+    A_UINT32        channel;    /* in MHz */
+    /**current RSSI average */
+    A_UINT32        rssi_average;
+    /**flags - wmi_extscan_wlan_change_flags */
+    A_UINT32        flags;
+    /**legnth of RSSI history to follow (number of values) */
+    A_UINT32        num_rssi_samples;
+} wmi_extscan_wlan_change_result_bssid;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_wlan_change_results_event_fixed_param */
+    /** Request ID of the WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID command that requested the results */
+    A_UINT32     request_id;
+    /** Requestor ID of the WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID command that requested the results */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) of the WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID command that requested the results */
+    A_UINT32     vdev_id;
+    /** Request ID of the WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID command that configured the table */
+    A_UINT32     config_request_id;
+    /** Requestor ID of the WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID command that configured the table */
+    A_UINT32     config_requestor_id;
+    /** VDEV id(interface) of the WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID command that configured the table */
+    A_UINT32     config_vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32     table_id;
+    /**number of entries with RSSI out of range or BSSID not detected */
+    A_UINT32     change_count;
+    /**total number of bssid signal descriptors (in all pages) */
+    A_UINT32     total_entries;
+    /**index of the first bssid signal descriptor entry found in the TLV wmi_extscan_wlan_descriptor*/
+    A_UINT32     first_entry_index;
+    /**number of bssids signal descriptors in this page */
+    A_UINT32     num_entries_in_page;
+/* Following this structure is the TLV:
+ *     wmi_extscan_wlan_change_result_bssid bssid_signal_descriptor_list[];
+ *         (number of descriptors given by field num_entries_in_page)
+ * Following this structure is the list of RSSI values (each is an A_UINT8):
+ *     A_UINT8 rssi_list[]; <-- last N RSSI values.
+ */
+} wmi_extscan_wlan_change_results_event_fixed_param;
+
+enum _tExtScanEntryFlags
+{
+    WMI_HOTLIST_FLAG_NONE           = 0x00,
+    WMI_HOTLIST_FLAG_PRESENCE       = 0x01,
+    WMI_HOTLIST_FLAG_DUPLICATE_SSID = 0x80,
+};
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param */
+    /** Request ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID that configured the table */
+    A_UINT32     config_request_id;
+    /** Requestor ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID that configured the table */
+    A_UINT32     config_requestor_id;
+    /** VDEV id(interface) of the WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID that configured the table */
+    A_UINT32     config_vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32     table_id;
+    /**total number of bssids (in all pages) */
+    A_UINT32     total_entries;
+    /**index of the first bssid entry found in the TLV wmi_extscan_wlan_descriptor*/
+    A_UINT32     first_entry_index;
+    /**number of bssids in this page */
+    A_UINT32     num_entries_in_page;
+/* Following this structure is the TLV:
+ *     wmi_extscan_wlan_descriptor hotlist_match[]; <-- number of descriptors given by field num_entries_in_page.
+ */
+} wmi_extscan_hotlist_match_event_fixed_param;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param */
+    /** Request ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID that configured the table */
+    A_UINT32     config_request_id;
+    /** Requestor ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID that configured the table */
+    A_UINT32     config_requestor_id;
+    /** VDEV id(interface) of the WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID that configured the table */
+    A_UINT32     config_vdev_id;
+    /** table ID - to allow support for multiple simultaneous tables */
+    A_UINT32     table_id;
+    /**total number of ssids (in all pages) */
+    A_UINT32     total_entries;
+    /**index of the first ssid entry found in the TLV wmi_extscan_wlan_descriptor*/
+    A_UINT32     first_entry_index;
+    /**number of ssids in this page */
+    A_UINT32     num_entries_in_page;
+/* Following this structure is the TLV:
+ *     wmi_extscan_wlan_descriptor hotlist_match[]; <-- number of descriptors given by field num_entries_in_page.
+ */
+} wmi_extscan_hotlist_ssid_match_event_fixed_param;
+
+typedef struct {
+    A_UINT32     tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_capabilities_event_fixed_param */
+    /** Request ID of the WMI_EXTSCAN_GET_CAPABILITIES_CMDID */
+    A_UINT32     request_id;
+    /** Requestor ID of the WMI_EXTSCAN_GET_CAPABILITIES_CMDID */
+    A_UINT32     requestor_id;
+    /** VDEV id(interface) of the WMI_EXTSCAN_GET_CAPABILITIES_CMDID */
+    A_UINT32     vdev_id;
+    /** number of extscan caches */
+    A_UINT32     num_extscan_cache_tables;
+    /** number of wlan change lists */
+    A_UINT32     num_wlan_change_monitor_tables;
+    /** number of hotlists */
+    A_UINT32     num_hotlist_monitor_tables;
+    /** if one sided rtt data collection is supported */
+    A_UINT32     rtt_one_sided_supported;
+    /** if 11v data collection is supported */
+    A_UINT32     rtt_11v_supported;
+    /** if 11mc data collection is supported */
+    A_UINT32     rtt_ftm_supported;
+    /** number of extscan cache capabilities (one per table)  */
+    A_UINT32     num_extscan_cache_capabilities;
+    /** number of wlan change  capabilities (one per table)  */
+    A_UINT32     num_extscan_wlan_change_capabilities;
+    /** number of extscan hotlist capabilities (one per table)  */
+    A_UINT32     num_extscan_hotlist_capabilities;
+    /* max number of roaming ssid whitelist firmware can support */
+    A_UINT32 num_roam_ssid_whitelist;
+    /* max number of blacklist bssid firmware can support */
+    A_UINT32 num_roam_bssid_blacklist;
+    /* max number of preferred list firmware can support */
+    A_UINT32 num_roam_bssid_preferred_list;
+    /* max number of hotlist ssids firmware can support */
+    A_UINT32 num_extscan_hotlist_ssid;
+    /* max number of epno networks firmware can support */
+    A_UINT32 num_epno_networks;
+
+/* Following this structure are the TLVs describing the capabilities of of the various types of lists. The FW theoretically
+ * supports multiple lists of each type.
+ *
+ *     wmi_extscan_cache_capabilities               extscan_cache_capabilities[] <-- capabilities of extscan cache (BSSID/RSSI lists)
+ *     wmi_extscan_wlan_change_monitor_capabilities wlan_change_capabilities[]   <-- capabilities of wlan_change_monitor_tables
+ *     wmi_extscan_hotlist_monitor_capabilities     hotlist_capabilities[]       <-- capabilities of hotlist_monitor_tables
+ */
+} wmi_extscan_capabilities_event_fixed_param;
+
+/* WMI_D0_WOW_DISABLE_ACK_EVENTID  */
+typedef struct{
+    A_UINT32    tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_d0_wow_disable_ack_event_fixed_param  */
+    A_UINT32    reserved0; /* for future need */
+} wmi_d0_wow_disable_ack_event_fixed_param;
+
+/** WMI_PDEV_RESUME_EVENTID : generated in response to WMI_PDEV_RESUME_CMDID */
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_resume_event_fixed_param  */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_resume_event_fixed_param;
+
+
+
+/** value representing all modules */
+#define WMI_DEBUG_LOG_MODULE_ALL 0xffff
+
+/* param definitions */
+
+/**
+  * Log level for a given module. Value contains both module id and log level.
+  * here is the bitmap definition for value.
+  * module Id   : 16
+  *     Flags   :  reserved
+  *     Level   :  8
+  * if odule Id  is WMI_DEBUG_LOG_MODULE_ALL then  log level is  applied to all modules (global).
+  * WMI_DEBUG_LOG_MIDULE_ALL will overwrites per module level setting.
+  */
+#define WMI_DEBUG_LOG_PARAM_LOG_LEVEL      0x1
+
+#define WMI_DBGLOG_SET_LOG_LEVEL(val,lvl) do { \
+        (val) |=  (lvl & 0xff);                \
+     } while (0)
+
+#define WMI_DBGLOG_GET_LOG_LEVEL(val) ((val) & 0xff)
+
+#define WMI_DBGLOG_SET_MODULE_ID(val,mid) do { \
+        (val) |=  ((mid & 0xffff) << 16);        \
+     } while (0)
+
+#define WMI_DBGLOG_GET_MODULE_ID(val) (((val) >> 16) & 0xffff)
+
+/**
+  * Enable the debug log for a given vdev. Value is vdev id
+  */
+#define WMI_DEBUG_LOG_PARAM_VDEV_ENABLE    0x2
+
+
+/**
+  * Disable the debug log for a given vdev. Value is vdev id
+  * All the log level  for a given VDEV is disabled except the ERROR log messages
+  */
+
+#define WMI_DEBUG_LOG_PARAM_VDEV_DISABLE   0x3
+
+/**
+  * set vdev enable bitmap. value is the vden enable bitmap
+  */
+#define WMI_DEBUG_LOG_PARAM_VDEV_ENABLE_BITMAP    0x4
+
+/**
+  * set a given log level to all the modules specified in the module bitmap.
+  * and set the log levle for all other modules to DBGLOG_ERR.
+  *  value: log levelt to be set.
+  *  module_id_bitmap : identifies the modules for which the log level should be set and
+  *                      modules for which the log level should be reset to DBGLOG_ERR.
+  */
+#define WMI_DEBUG_LOG_PARAM_MOD_ENABLE_BITMAP    0x5
+
+#define NUM_MODULES_PER_ENTRY ((sizeof(A_UINT32)) << 3)
+
+#define WMI_MODULE_ENABLE(pmid_bitmap,mod_id) \
+    ((pmid_bitmap)[(mod_id)/NUM_MODULES_PER_ENTRY] |= \
+         (1 << ((mod_id)%NUM_MODULES_PER_ENTRY)))
+
+#define WMI_MODULE_DISABLE(pmid_bitmap,mod_id)     \
+    ((pmid_bitmap)[(mod_id)/NUM_MODULES_PER_ENTRY] &=  \
+      (~(1 << ((mod_id)%NUM_MODULES_PER_ENTRY))))
+
+#define WMI_MODULE_IS_ENABLED(pmid_bitmap,mod_id) \
+    (((pmid_bitmap)[(mod_id)/NUM_MODULES_PER_ENTRY] &  \
+       (1 << ((mod_id)%NUM_MODULES_PER_ENTRY))) != 0)
+
+#define MAX_MODULE_ID_BITMAP_WORDS 16 /* 16*32=512 module ids. should be more than sufficient */
+typedef struct {
+        A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_debug_log_config_cmd_fixed_param */
+        A_UINT32 dbg_log_param; /** param types are defined above */
+        A_UINT32 value;
+        /* The below array will follow this tlv ->fixed length module_id_bitmap[]
+        A_UINT32 module_id_bitmap[MAX_MODULE_ID_BITMAP_WORDS];
+     */
+} wmi_debug_log_config_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_temperature_cmd_fixed_param  */
+    A_UINT32 param;     /* Reserved for future use */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_get_temperature_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_temperature_event_fixed_param */
+    A_INT32  value;     /* temprature value in Celcius degree */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_temperature_event_fixed_param;
+
+typedef enum {
+    ANTDIV_HW_CFG_STATUS,
+    ANTDIV_SW_CFG_STATUS,
+    ANTDIV_MAX_STATUS_TYPE_NUM
+} ANTDIV_STATUS_TYPE;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_antdiv_status_cmd_fixed_param  */
+    A_UINT32 status_event_id; /* Status event ID - see ANTDIV_STATUS_TYPE */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_get_antdiv_status_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_antdiv_status_event_fixed_param */
+    A_UINT32 support;   /* ANT DIV feature enabled or not */
+    A_UINT32 chain_num; /* how many chain supported */
+    A_UINT32 ant_num;   /* how many ANT supported, 32 max */
+    /*
+     * Each entry is for a tx/rx chain, and contains a bitmap identifying
+     * the antennas attached to that tx/rx chain.
+     */
+    A_UINT32 selectable_ant_mask[8];
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_antdiv_status_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_set_dhcp_server_offload_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 enable;
+    A_UINT32 srv_ipv4; /* server IP */
+    A_UINT32 start_lsb; /* starting address assigned to client */
+    A_UINT32 num_client; /* number of clients we support */
+} wmi_set_dhcp_server_offload_cmd_fixed_param;
+
+typedef enum {
+    AP_RX_DATA_OFFLOAD             = 0x00,
+    STA_RX_DATA_OFFLOAD            = 0x01,
+} wmi_ipa_offload_types;
+
+/**
+ * This command is sent from WLAN host driver to firmware for
+ * enabling/disabling IPA data-path offload features.
+ *
+ *
+ * Enabling data path offload to IPA(based on host INI configuration), example:
+ *    when STA interface comes up,
+ *    host->target: WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMD,
+ *                  (enable = 1, vdev_id = STA vdev id, offload_type = STA_RX_DATA_OFFLOAD)
+ *
+ * Disabling data path offload to IPA, example:
+ *    host->target: WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMD,
+ *                  (enable = 0, vdev_id = STA vdev id, offload_type = STA_RX_DATA_OFFLOAD)
+ *
+ *
+ * This command is applicable only on the PCIE LL systems
+ *
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ipa_offload_enable_disable_cmd_fixed_param */
+    A_UINT32 offload_type; /* wmi_ipa_offload_types enum values */
+    A_UINT32 vdev_id;
+    A_UINT32 enable; /* 1 == enable, 0 == disable */
+} wmi_ipa_offload_enable_disable_cmd_fixed_param;
+
+typedef enum {
+    WMI_LED_FLASHING_PATTERN_NOT_CONNECTED    = 0,
+    WMI_LED_FLASHING_PATTERN_CONNECTED   = 1,
+    WMI_LED_FLASHING_PATTERN_RESERVED    = 2,
+} wmi_set_led_flashing_type;
+
+/**
+The state of the LED GPIO control is determined by two 32 bit values(X_0 and X_1) to produce a 64 bit value.
+Each 32 bit value consists of 4 bytes, where each byte defines the number of 50ms intervals that the GPIO will
+remain at a predetermined state. The 64 bit value provides 8 unique GPIO timing intervals. The pattern starts
+with the MSB of X_0 and continues to the LSB of X_1. After executing the timer interval of the LSB of X_1, the
+pattern returns to the MSB of X_0 and repeats. The GPIO state for each timing interval  alternates from Low to
+High and the first interval of the pattern represents the time when the GPIO is Low. When a timing interval of
+Zero is reached, it is skipped and moves on to the next interval.
+*/
+typedef struct{
+    A_UINT32    tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_set_led_flashing_cmd_fixed_param  */
+    A_UINT32    pattern_id; /* pattern identifier */
+    A_UINT32    led_x0; /* led flashing parameter0 */
+    A_UINT32    led_x1; /* led flashing parameter1 */
+    A_UINT32    gpio_num; /* GPIO number */
+} wmi_set_led_flashing_cmd_fixed_param;
+
+/**
+ * The purpose of the multicast Domain Name System (mDNS) is to resolve host names to IP addresses
+ * within small networks that do not include a local name server.
+ * It utilizes essentially the same programming interfaces, packet formats and operating semantics
+ * as the unicast DNS, and the advantage is zero configuration service while no need for central or
+ * global server.
+ * Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover a named list of services
+ * by type in a specified domain using standard DNS queries.
+ * Here, we provide the ability to advertise the available services by responding to mDNS queries.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_offload_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 enable;
+} wmi_mdns_offload_cmd_fixed_param;
+
+#define WMI_MAX_MDNS_FQDN_LEN         64
+#define WMI_MAX_MDNS_RESP_LEN         512
+#define WMI_MDNS_FQDN_TYPE_GENERAL    0
+#define WMI_MDNS_FQDN_TYPE_UNIQUE     1
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_set_fqdn_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    /** type of fqdn, general or unique */
+    A_UINT32 type;
+    /** length of fqdn */
+    A_UINT32 fqdn_len;
+    /* Following this structure is the TLV byte stream of fqdn data of length fqdn_len
+     * A_UINT8  fqdn_data[]; <-- fully-qualified domain name to check if match with the received queries
+     */
+} wmi_mdns_set_fqdn_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_set_resp_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    /** Answer Resource Record count */
+    A_UINT32 AR_count;
+    /** length of response */
+    A_UINT32 resp_len;
+    /* Following this structure is the TLV byte stream of resp data of length resp_len
+     * A_UINT8  resp_data[]; <-- responses consisits of Resource Records
+     */
+} wmi_mdns_set_resp_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_get_stats_cmd_fixed_param */
+    A_UINT32 vdev_id;
+} wmi_mdns_get_stats_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_stats_event_fixed_param */
+    A_UINT32 vdev_id;
+    /** curTimestamp in milliseconds */
+    A_UINT32 curTimestamp;
+    /** last received Query in milliseconds */
+    A_UINT32 lastQueryTimestamp;
+    /** last sent Response in milliseconds */
+    A_UINT32 lastResponseTimestamp;
+    /** stats of received queries */
+    A_UINT32 totalQueries;
+    /** stats of macth queries */
+    A_UINT32 totalMatches;
+    /** stats of responses */
+    A_UINT32 totalResponses;
+    /** indicate the current status of mDNS offload */
+    A_UINT32 status;
+} wmi_mdns_stats_event_fixed_param;
+
+/**
+ * The purpose of the SoftAP authenticator offload is to offload the association and 4-way handshake process
+ * down to the firmware. When this feature is enabled, firmware can process the association/disassociation
+ * request and create/remove connection even host is suspended.
+ * 3 major components are offloaded:
+ *     1. ap-mlme. Firmware will process auth/deauth, association/disassociation request and send out response.
+ *     2. 4-way handshake. Firmware will send out m1/m3 and receive m2/m4.
+ *     3. key installation. Firmware will generate PMK from the psk info which is sent from the host and install PMK/GTK.
+ * Current implementation only supports WPA2 CCMP.
+ */
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sap_ofl_enable_cmd_fixed_param */
+    /** VDEV id(interface) of the WMI_SAP_OFL_ENABLE_CMDID */
+    A_UINT32 vdev_id;
+    /** enable/disable sap auth offload */
+    A_UINT32 enable;
+    /** sap ssid */
+    wmi_ssid ap_ssid;
+    /** authentication mode (defined above) */
+    A_UINT32 rsn_authmode;
+    /** unicast cipher set */
+    A_UINT32 rsn_ucastcipherset;
+    /** mcast/group cipher set */
+    A_UINT32 rsn_mcastcipherset;
+    /** mcast/group management frames cipher set */
+    A_UINT32 rsn_mcastmgmtcipherset;
+    /** sap channel */
+    A_UINT32 channel;
+    /** length of psk */
+    A_UINT32 psk_len;
+    /* Following this structure is the TLV byte stream of wpa passphrase data of length psk_len
+     * A_UINT8  psk[];
+     */
+} wmi_sap_ofl_enable_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sap_ofl_add_sta_event_fixed_param */
+    /** VDEV id(interface) of the WMI_SAP_OFL_ADD_STA_EVENTID */
+    A_UINT32 vdev_id;
+    /** aid (association id) of this station */
+    A_UINT32 assoc_id;
+    /** peer station's mac addr */
+    wmi_mac_addr peer_macaddr;
+    /** length of association request frame */
+    A_UINT32 data_len;
+    /* Following this structure is the TLV byte stream of a whole association request frame of length data_len
+     * A_UINT8 bufp[];
+     */
+} wmi_sap_ofl_add_sta_event_fixed_param;
+
+typedef enum {
+    SAP_OFL_DEL_STA_FLAG_NONE       = 0x00,
+    SAP_OFL_DEL_STA_FLAG_RECONNECT  = 0x01,
+} wmi_sap_ofl_del_sta_flags;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sap_ofl_del_sta_event_fixed_param */
+    /** VDEV id(interface) of the WMI_SAP_OFL_DEL_STA_EVENTID */
+    A_UINT32 vdev_id;
+    /** aid (association id) of this station */
+    A_UINT32 assoc_id;
+    /** peer station's mac addr */
+    wmi_mac_addr peer_macaddr;
+    /** disassociation reason */
+    A_UINT32 reason;
+    /** flags - wmi_sap_ofl_del_sta_flags */
+    A_UINT32 flags;
+} wmi_sap_ofl_del_sta_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sap_set_blacklist_param_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    /* Number of client failure connection attempt */
+    A_UINT32 num_retry;
+    /* Time in milliseconds to record the client's failure connection attempts */
+    A_UINT32 retry_allow_time_ms;
+    /* Time in milliseconds to drop the connection request if client is blacklisted */
+    A_UINT32 blackout_time_ms;
+} wmi_sap_set_blacklist_param_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_apfind_cmd_param */
+    A_UINT32 data_len; /** length in byte of data[]. */
+    /** This structure is used to send REQ binary blobs
+     * from application/service to firmware where Host drv is pass through .
+     * Following this structure is the TLV:
+     *     A_UINT8 data[]; <-- length in byte given by field data_len.
+     */
+} wmi_apfind_cmd_param;
+
+typedef enum apfind_event_type_e {
+    APFIND_MATCH_EVENT = 0,
+    APFIND_WAKEUP_EVENT,
+} APFIND_EVENT_TYPE;
+
+typedef struct {
+    A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_apfind_event_hdr */
+    A_UINT32 event_type; /** APFIND_EVENT_TYPE */
+    A_UINT32 data_len; /** length in byte of data[]. */
+    /** This structure is used to send event binary blobs
+     * from firmware to application/service and Host drv.
+     * Following this structure is the TLV:
+     *     A_UINT8 data[]; <-- length in byte given by field data_len.
+     */
+} wmi_apfind_event_hdr;
+
+
+/**
+ * OCB DCC types and structures.
+ */
+
+/**
+ * DCC types as described in ETSI TS 102 687
+ * Type                   Format            stepSize    referenceValue  numBits
+ * -------------------------------------------------------------------------
+ * ndlType_acPrio         INTEGER (0...7)   1           number          3
+ * ndlType_controlLoop    INTEGER (0...7)   1           0               3
+ * ndlType_arrivalRate    INTEGER (0..8191) 0.01 /s     0               13
+ * ndlType_channelLoad    INTEGER (0..1000) 0.1 %       0 %             10
+ * ndlType_channelUse     INTEGER (0..8000) 0.0125 %    0 %             13
+ * ndlType_datarate       INTEGER (0..7)                Table 8         3
+ * ndlType_distance       INTEGER (0..4095) 1 m         0               12
+ * ndlType_numberElements INTEGER (0..63)               number          6
+ * ndlType_packetDuration INTEGER (0..2047) TSYM        0               11
+ * ndlType_packetInterval INTEGER (0..1023) 10 ms       0               10
+ * ndlType_pathloss       INTEGER (0..31)   0.1         1.0             5
+ * ndlType_rxPower        INTEGER (0..127)  -0.5 dB     -40 dBm         7
+ * ndlType_snr            INTEGER (0..127)  0.5 dB      -10 dB          7
+ * ndlType_timing         INTEGER (0..4095) 10 ms       0               12
+ * ndlType_txPower        INTEGER (0..127)  0.5 dB      -20 dBm         7
+ * ndlType_ratio          INTEGER (0..100)  1 %         0 %             7
+ * ndlType_exponent       INTEGER (0..100)  0.1         0               7
+ * ndlType_queueStatus    Enumeration                   Table A.2       1
+ * ndlType_dccMechanism   Bitset                        Table A.2       6
+ *
+ * NOTE: All of following size macros (SIZE_NDLTYPE_ACPRIO through SIZE_BYTE)
+ * cannot be changed without breaking WMI compatibility.
+ *
+ * NOTE: For each of the types, one additional bit is allocated. This
+ *  leftmost bit is used to indicate that the value is invalid. */
+#define SIZE_NDLTYPE_ACPRIO         (1 +  3)
+#define SIZE_NDLTYPE_CONTROLLOOP    (1 +  3)
+#define SIZE_NDLTYPE_ARRIVALRATE    (1 + 13)
+#define SIZE_NDLTYPE_CHANNELLOAD    (1 + 10)
+#define SIZE_NDLTYPE_CHANNELUSE     (1 + 13)
+#define SIZE_NDLTYPE_DATARATE       (1 +  3)
+#define SIZE_NDLTYPE_DISTANCE       (1 + 12)
+#define SIZE_NDLTYPE_NUMBERELEMENTS (1 +  6)
+#define SIZE_NDLTYPE_PACKETDURATION (1 + 11)
+#define SIZE_NDLTYPE_PACKETINTERVAL (1 + 10)
+#define SIZE_NDLTYPE_PATHLOSS       (1 +  5)
+#define SIZE_NDLTYPE_RXPOWER        (1 +  7)
+#define SIZE_NDLTYPE_SNR            (1 +  7)
+#define SIZE_NDLTYPE_TIMING         (1 + 12)
+#define SIZE_NDLTYPE_TXPOWER        (1 +  7)
+#define SIZE_NDLTYPE_RATIO          (1 +  7)
+#define SIZE_NDLTYPE_EXPONENT       (1 +  7)
+#define SIZE_NDLTYPE_QUEUESTATUS    (1 +  1)
+#define SIZE_NDLTYPE_DCCMECHANISM   (1 +  6)
+#define SIZE_BYTE                   (8)
+
+#define INVALID_ACPRIO          ((1 << SIZE_NDLTYPE_ACPRIO) - 1)
+#define INVALID_CONTROLLOOP     ((1 << SIZE_NDLTYPE_CONTROLLOOP) - 1)
+#define INVALID_ARRIVALRATE     ((1 << SIZE_NDLTYPE_ARRIVALRATE) - 1)
+#define INVALID_CHANNELLOAD     ((1 << SIZE_NDLTYPE_CHANNELLOAD) - 1)
+#define INVALID_CHANNELUSE      ((1 << SIZE_NDLTYPE_CHANNELUSE) - 1)
+#define INVALID_DATARATE        ((1 << SIZE_NDLTYPE_DATARATE) - 1)
+#define INVALID_DISTANCE        ((1 << SIZE_NDLTYPE_DISTANCE) - 1)
+#define INVALID_NUMBERELEMENTS  ((1 << SIZE_NDLTYPE_NUMBERELEMENTS) - 1)
+#define INVALID_PACKETDURATION  ((1 << SIZE_NDLTYPE_PACKETDURATION) - 1)
+#define INVALID_PACKETINTERVAL  ((1 << SIZE_NDLTYPE_PACKETINTERVAL) - 1)
+#define INVALID_PATHLOSS        ((1 << SIZE_NDLTYPE_PATHLOSS) - 1)
+#define INVALID_RXPOWER         ((1 << SIZE_NDLTYPE_RXPOWER) - 1)
+#define INVALID_SNR             ((1 << SIZE_NDLTYPE_SNR) - 1)
+#define INVALID_TIMING          ((1 << SIZE_NDLTYPE_TIMING) - 1)
+#define INVALID_TXPOWER         ((1 << SIZE_NDLTYPE_TXPOWER) - 1)
+#define INVALID_RATIO           ((1 << SIZE_NDLTYPE_RATIO) - 1)
+#define INVALID_EXPONENT        ((1 << SIZE_NDLTYPE_EXPONENT) - 1)
+#define INVALID_QUEUESTATS      ((1 << SIZE_NDLTYPE_QUEUESTATUS) - 1)
+#define INVALID_DCCMECHANISM    ((1 << SIZE_NDLTYPE_DCCMECHANISM) - 1)
+
+/** The MCS_COUNT macro cannot be modified without breaking
+ *  WMI compatibility. */
+#define MCS_COUNT               (8)
+
+/** Flags for ndlType_dccMechanism. */
+typedef enum {
+    DCC_MECHANISM_TPC = 1,
+    DCC_MECHANISM_TRC = 2,
+    DCC_MECHANISM_TDC = 4,
+    DCC_MECHANISM_DSC = 8,
+    DCC_MECHANISM_TAC = 16,
+    DCC_MECHANISM_RESERVED = 32,
+    DCC_MECHANISM_ALL = 0x3f,
+} wmi_dcc_ndl_type_dcc_mechanism;
+
+/** Values for ndlType_queueStatus. */
+typedef enum {
+    DCC_QUEUE_CLOSED = 0,
+    DCC_QUEUE_OPEN = 1,
+} wmi_dcc_ndl_type_queue_status;
+
+/** For ndlType_acPrio, use the values in wmi_traffic_ac. */
+
+/** Values for ndlType_datarate */
+typedef enum {
+    DCC_DATARATE_3_MBPS = 0,
+    DCC_DATARATE_4_5_MBPS = 1,
+    DCC_DATARATE_6_MBPS = 2,
+    DCC_DATARATE_9_MBPS = 3,
+    DCC_DATARATE_12_MBPS = 4,
+    DCC_DATARATE_18_MBPS = 5,
+    DCC_DATARATE_24_MBPS = 6,
+    DCC_DATARATE_27_MBPS = 7,
+} wmi_dcc_ndl_type_datarate;
+
+/** Data structure for active state configuration. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_dcc_ndl_active_state_config */
+    A_UINT32 tlv_header;
+    /**
+     * NDL_asStateId, ndlType_numberElements, 1+6 bits.
+     * NDL_asChanLoad, ndlType_channelLoad, 1+10 bits.
+     */
+    A_UINT32 state_info;
+    /**
+     * NDL_asDcc(AC_BK), ndlType_dccMechanism, 1+6 bits.
+     * NDL_asDcc(AC_BE), ndlType_dccMechanism, 1+6 bits.
+     * NDL_asDcc(AC_VI), ndlType_dccMechanism, 1+6 bits.
+     * NDL_asDcc(AC_VO), ndlType_dccMechanism, 1+6 bits.
+     */
+    A_UINT32 as_dcc[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_DCCMECHANISM)];
+
+    /**
+     * NDL_asTxPower(AC_BK), ndlType_txPower, 1+7 bits.
+     * NDL_asTxPower(AC_BE), ndlType_txPower, 1+7 bits.
+     * NDL_asTxPower(AC_VI), ndlType_txPower, 1+7 bits.
+     * NDL_asTxPower(AC_VO), ndlType_txPower, 1+7 bits.
+     */
+    A_UINT32 as_tx_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_TXPOWER)];
+    /**
+     * NDL_asPacketInterval(AC_BK), ndlType_packetInterval, 1+10 bits.
+     * NDL_asPacketInterval(AC_BE), ndlType_packetInterval, 1+10 bits.
+     * NDL_asPacketInterval(AC_VI), ndlType_packetInterval, 1+10 bits.
+     * NDL_asPacketInterval(AC_VO), ndlType_packetInterval, 1+10 bits.
+     */
+    A_UINT32 as_packet_interval_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_PACKETINTERVAL)];
+    /**
+     * NDL_asDatarate(AC_BK), ndlType_datarate, 1+3 bits.
+     * NDL_asDatarate(AC_BE), ndlType_datarate, 1+3 bits.
+     * NDL_asDatarate(AC_VI), ndlType_datarate, 1+3 bits.
+     * NDL_asDatarate(AC_VO), ndlType_datarate, 1+3 bits.
+     */
+    A_UINT32 as_datarate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_DATARATE)];
+    /**
+     * NDL_asCarrierSense(AC_BK), ndlType_rxPower, 1+7 bits.
+     * NDL_asCarrierSense(AC_BE), ndlType_rxPower, 1+7 bits.
+     * NDL_asCarrierSense(AC_VI), ndlType_rxPower, 1+7 bits.
+     * NDL_asCarrierSense(AC_VO), ndlType_rxPower, 1+7 bits.
+     */
+    A_UINT32 as_carrier_sense_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_RXPOWER)];
+} wmi_dcc_ndl_active_state_config;
+
+#define WMI_NDL_AS_STATE_ID_GET(ptr)                    WMI_GET_BITS((ptr)->state_info, 0, 7)
+#define WMI_NDL_AS_STATE_ID_SET(ptr,val)                WMI_SET_BITS((ptr)->state_info, 0, 7, val)
+#define WMI_NDL_AS_CHAN_LOAD_GET(ptr)                   WMI_GET_BITS((ptr)->state_info, 7, 11)
+#define WMI_NDL_AS_CHAN_LOAD_SET(ptr,val)               WMI_SET_BITS((ptr)->state_info, 7, 11, val)
+#define WMI_NDL_AS_DCC_GET(ptr,acprio)                  wmi_packed_arr_get_bits((ptr)->as_dcc, acprio, SIZE_NDLTYPE_DCCMECHANISM)
+#define WMI_NDL_AS_DCC_SET(ptr,acprio,val)              wmi_packed_arr_set_bits((ptr)->as_dcc, acprio, SIZE_NDLTYPE_DCCMECHANISM, val)
+#define WMI_NDL_AS_TX_POWER_GET(ptr,acprio)             wmi_packed_arr_get_bits((ptr)->as_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER)
+#define WMI_NDL_AS_TX_POWER_SET(ptr,acprio,val)         wmi_packed_arr_set_bits((ptr)->as_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val)
+#define WMI_NDL_AS_PACKET_INTERVAL_GET(ptr,acprio)      wmi_packed_arr_get_bits((ptr)->as_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL)
+#define WMI_NDL_AS_PACKET_INTERVAL_SET(ptr,acprio,val)  wmi_packed_arr_set_bits((ptr)->as_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL, val)
+#define WMI_NDL_AS_DATARATE_GET(ptr,acprio)             wmi_packed_arr_get_bits((ptr)->as_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE)
+#define WMI_NDL_AS_DATARATE_SET(ptr,acprio,val)         wmi_packed_arr_set_bits((ptr)->as_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE, val)
+#define WMI_NDL_AS_CARRIER_SENSE_GET(ptr,acprio)        wmi_packed_arr_get_bits((ptr)->as_carrier_sense_ac, acprio, SIZE_NDLTYPE_RXPOWER)
+#define WMI_NDL_AS_CARRIER_SENSE_SET(ptr,acprio,val)    wmi_packed_arr_set_bits((ptr)->as_carrier_sense_ac, acprio, SIZE_NDLTYPE_RXPOWER, val)
+
+/** Data structure for EDCA/QOS parameters. */
+typedef struct
+{
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_qos_parameter */
+    A_UINT32 tlv_header;
+    /** Arbitration Inter-Frame Spacing. Range: 2-15 */
+    A_UINT32 aifsn;
+    /** Contention Window minimum. Range: 1 - 10 */
+    A_UINT32 cwmin;
+    /** Contention Window maximum. Range: 1 - 10 */
+    A_UINT32 cwmax;
+} wmi_qos_parameter;
+
+/** Data structure for information specific to a channel. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_ocb_channel */
+    A_UINT32 tlv_header;
+    A_UINT32 bandwidth; /* MHz units */
+    wmi_mac_addr mac_address;
+} wmi_ocb_channel;
+
+/** Data structure for an element of the schedule array. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_ocb_schedule_element */
+    A_UINT32 tlv_header;
+    A_UINT32 channel_freq; /* MHz units */
+    A_UINT32 total_duration; /* ms units */
+    A_UINT32 guard_interval; /* ms units */
+} wmi_ocb_schedule_element;
+
+/** Data structure for OCB configuration. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_ocb_set_config_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** VDEV id(interface) that is being configured */
+    A_UINT32 vdev_id;
+    A_UINT32 channel_count;
+    A_UINT32 schedule_size;
+    A_UINT32 flags;
+    A_UINT32 ta_max_duration; /* Max duration of continuing multichannel operation without receiving a TA frame (units = seconds) */
+
+    /** This is followed by a TLV array of wmi_channel. */
+    /** This is followed by a TLV array of wmi_ocb_channel. */
+    /** This is followed by a TLV array of wmi_qos_parameter. */
+    /** This is followed by a TLV array of wmi_dcc_ndl_chan. */
+    /** This is followed by a TLV array of wmi_dcc_ndl_active_state_config. */
+    /** This is followed by a TLV array of wmi_ocb_schedule_element. */
+} wmi_ocb_set_config_cmd_fixed_param;
+
+#define EXPIRY_TIME_IN_TSF_TIMESTAMP_OFFSET     0
+#define EXPIRY_TIME_IN_TSF_TIMESTAMP_MASK       1
+
+#define WMI_OCB_EXPIRY_TIME_IN_TSF(ptr)     (((ptr)->flags & EXPIRY_TIME_IN_TSF_TIMESTAMP_MASK) >> EXPIRY_TIME_IN_TSF_TIMESTAMP_OFFSET)
+
+
+/** Data structure for the response to the WMI_OCB_SET_CONFIG_CMDID command. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_ocb_set_config_resp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    A_UINT32 status;
+} wmi_ocb_set_config_resp_event_fixed_param;
+
+/* SIZE_UTC_TIME and SIZE_UTC_TIME_ERROR cannot be modified without breaking
+   WMI compatibility. */
+#define SIZE_UTC_TIME (10) /* The size of the utc time in bytes. */
+#define SIZE_UTC_TIME_ERROR (5) /* The size of the utc time error in bytes. */
+
+/** Data structure to set the UTC time. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_ocb_set_utc_time_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /** 10 bytes of the utc time. */
+    A_UINT32 utc_time[WMI_PACKED_ARR_SIZE(SIZE_UTC_TIME,SIZE_BYTE)];
+    /** 5 bytes of the time error. */
+    A_UINT32 time_error[WMI_PACKED_ARR_SIZE(SIZE_UTC_TIME_ERROR,SIZE_BYTE)];
+} wmi_ocb_set_utc_time_cmd_fixed_param;
+
+#define WMI_UTC_TIME_GET(ptr,byte_index)        wmi_packed_arr_get_bits((ptr)->utc_time, byte_index, SIZE_BYTE)
+#define WMI_UTC_TIME_SET(ptr,byte_index,val)    wmi_packed_arr_set_bits((ptr)->utc_time, byte_index, SIZE_BYTE, val)
+#define WMI_TIME_ERROR_GET(ptr,byte_index)      wmi_packed_arr_get_bits((ptr)->time_error, byte_index, SIZE_BYTE)
+#define WMI_TIME_ERROR_SET(ptr,byte_index,val)  wmi_packed_arr_set_bits((ptr)->time_error, byte_index, SIZE_BYTE, val)
+
+/** Data structure start the timing advertisement. The template for the
+ *  timing advertisement frame follows this structure in the WMI command.
+ */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_ocb_start_timing_advert_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /** Number of times the TA is sent every 5 seconds. */
+    A_UINT32 repeat_rate;
+    /** The frequency on which to transmit. */
+    A_UINT32 channel_freq; /* MHz units */
+    /** The offset into the template of the timestamp. */
+    A_UINT32 timestamp_offset;
+    /** The offset into the template of the time value. */
+    A_UINT32 time_value_offset;
+    /** The length of the timing advertisement template. The
+     *  template is in the TLV data. */
+    A_UINT32 timing_advert_template_length;
+
+    /** This is followed by a binary array containing the TA template. */
+} wmi_ocb_start_timing_advert_cmd_fixed_param;
+
+/** Data structure to stop the timing advertisement. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_ocb_stop_timing_advert_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    A_UINT32 channel_freq; /* MHz units */
+} wmi_ocb_stop_timing_advert_cmd_fixed_param;
+
+/** Data structure for the request for WMI_OCB_GET_TSF_TIMER_CMDID. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    A_UINT32 reserved;
+} wmi_ocb_get_tsf_timer_cmd_fixed_param;
+
+/** Data structure for the response to WMI_OCB_GET_TSF_TIMER_CMDID. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_resp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    A_UINT32 tsf_timer_high;
+    A_UINT32 tsf_timer_low;
+} wmi_ocb_get_tsf_timer_resp_event_fixed_param;
+
+/** Data structure for DCC stats configuration per channel. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_ndl_stats_per_channel */
+    A_UINT32 tlv_header;
+
+    /** The channel for which this applies, 16 bits. */
+    /** The dcc_stats_bitmap, 8 bits. */
+    A_UINT32 chan_info;
+
+    /** Demodulation model parameters. */
+    /**
+     * NDL_snrBackoff(MCS0), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS1), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS2), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS3), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS4), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS5), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS6), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS7), ndlType_snr, 1+7 bits.
+     */
+    A_UINT32 snr_backoff_mcs[WMI_PACKED_ARR_SIZE(MCS_COUNT,SIZE_NDLTYPE_SNR)];
+
+    /** Communication ranges. */
+    /**
+     * tx_power, ndlType_txPower, 1+7 bits.
+     * datarate, ndlType_datarate, 1+3 bits.
+     */
+    A_UINT32 tx_power_datarate;
+    /**
+     * NDL_carrierSenseRange, ndlType_distance, 1+12 bits.
+     * NDL_estCommRange, ndlType_distance, 1+12 bits.
+     */
+    A_UINT32 carrier_sense_est_comm_range;
+
+    /** Channel load measures. */
+    /**
+     * dccSensitivity, ndlType_rxPower, 1+7 bits.
+     * carrierSense, ndlType_rxPower, 1+7 bits.
+     * NDL_channelLoad, ndlType_channelLoad, 1+10 bits.
+     */
+    A_UINT32 dcc_stats;
+    /**
+     * NDL_packetArrivalRate, ndlType_arrivalRate, 1+13 bits.
+     * NDL_packetAvgDuration, ndlType_packetDuration, 1+11 bits.
+     */
+    A_UINT32 packet_stats;
+    /**
+     * NDL_channelBusyTime, ndlType_channelLoad, 1+10 bits.
+     */
+    A_UINT32 channel_busy_time;
+
+    /** Transmit packet statistics. */
+    /**
+     * NDL_txPacketArrivalRate(AC_BK), ndlType_arrivalRate, 1+13 bits.
+     * NDL_txPacketArrivalRate(AC_BE), ndlType_arrivalRate, 1+13 bits.
+     * NDL_txPacketArrivalRate(AC_VI), ndlType_arrivalRate, 1+13 bits.
+     * NDL_txPacketArrivalRate(AC_VO), ndlType_arrivalRate, 1+13 bits.
+     */
+    A_UINT32 tx_packet_arrival_rate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_ARRIVALRATE)];
+    /**
+     * NDL_txPacketAvgDuration(AC_BK), ndlType_packetDuration, 1+11 bits.
+     * NDL_txPacketAvgDuration(AC_BE), ndlType_packetDuration, 1+11 bits.
+     * NDL_txPacketAvgDuration(AC_VI), ndlType_packetDuration, 1+11 bits.
+     * NDL_txPacketAvgDuration(AC_VO), ndlType_packetDuration, 1+11 bits.
+     */
+    A_UINT32 tx_packet_avg_duration_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_PACKETDURATION)];
+    /**
+     * NDL_txChannelUse(AC_BK), ndlType_channelUse, 1+13 bits.
+     * NDL_txChannelUse(AC_BE), ndlType_channelUse, 1+13 bits.
+     * NDL_txChannelUse(AC_VI), ndlType_channelUse, 1+13 bits.
+     * NDL_txChannelUse(AC_VO), ndlType_channelUse, 1+13 bits.
+     */
+    A_UINT32 tx_channel_use_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_CHANNELUSE)];
+    /**
+     * NDL_txSignalAvgPower(AC_BK), ndlType_txPower, 1+7 bits.
+     * NDL_txSignalAvgPower(AC_BE), ndlType_txPower, 1+7 bits.
+     * NDL_txSignalAvgPower(AC_VI), ndlType_txPower, 1+7 bits.
+     * NDL_txSignalAvgPower(AC_VO), ndlType_txPower, 1+7 bits.
+     */
+    A_UINT32 tx_signal_avg_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_TXPOWER)];
+} wmi_dcc_ndl_stats_per_channel;
+
+#define WMI_NDL_STATS_SNR_BACKOFF_GET(ptr,mcs)      wmi_packed_arr_get_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR)
+#define WMI_NDL_STATS_SNR_BACKOFF_SET(ptr,mcs,val)  wmi_packed_arr_set_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR, val)
+
+#define WMI_NDL_STATS_CHAN_FREQ_GET(ptr)            WMI_GET_BITS((ptr)->chan_info, 0, 16)
+#define WMI_NDL_STATS_CHAN_FREQ_SET(ptr,val)        WMI_SET_BITS((ptr)->chan_info, 0, 16, val)
+#define WMI_NDL_STATS_DCC_STATS_BITMAP_GET(ptr)     WMI_GET_BITS((ptr)->chan_info, 16, 8)
+#define WMI_NDL_STATS_DCC_STATS_BITMAP_SET(ptr,val) WMI_SET_BITS((ptr)->chan_info, 16, 8, val)
+
+#define WMI_NDL_STATS_SNR_BACKOFF_GET(ptr,mcs)      wmi_packed_arr_get_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR)
+#define WMI_NDL_STATS_SNR_BACKOFF_SET(ptr,mcs,val)  wmi_packed_arr_set_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR, val)
+
+#define WMI_TX_POWER_GET(ptr)                       WMI_GET_BITS((ptr)->tx_power_datarate, 0, 8)
+#define WMI_TX_POWER_SET(ptr,val)                   WMI_SET_BITS((ptr)->tx_power_datarate, 0, 8, val)
+#define WMI_TX_DATARATE_GET(ptr)                    WMI_GET_BITS((ptr)->tx_power_datarate, 0, 4)
+#define WMI_TX_DATARATE_SET(ptr,val)                WMI_SET_BITS((ptr)->tx_power_datarate, 0, 4, val)
+#define WMI_NDL_CARRIER_SENSE_RANGE_GET(ptr)        WMI_GET_BITS((ptr)->carrier_sense_est_comm_range, 0, 13)
+#define WMI_NDL_CARRIER_SENSE_RANGE_SET(ptr,val)    WMI_SET_BITS((ptr)->carrier_sense_est_comm_range, 0, 13, val)
+#define WMI_NDL_EST_COMM_RANGE_GET(ptr)             WMI_GET_BITS((ptr)->carrier_sense_est_comm_range, 13, 13)
+#define WMI_NDL_EST_COMM_RANGE_SET(ptr,val)         WMI_SET_BITS((ptr)->carrier_sense_est_comm_range, 13, 13, val)
+
+#define WMI_DCC_SENSITIVITY_GET(ptr)                WMI_GET_BITS((ptr)->dcc_stats, 0, 8)
+#define WMI_DCC_SENSITIVITY_SET(ptr,val)            WMI_SET_BITS((ptr)->dcc_stats, 0, 8, val)
+#define WMI_CARRIER_SENSE_GET(ptr)                  WMI_GET_BITS((ptr)->dcc_stats, 8, 8)
+#define WMI_CARRIER_SENSE_SET(ptr,val)              WMI_SET_BITS((ptr)->dcc_stats, 8, 8, val)
+#define WMI_NDL_CHANNEL_LOAD_GET(ptr)               WMI_GET_BITS((ptr)->dcc_stats, 16, 11)
+#define WMI_NDL_CHANNEL_LOAD_SET(ptr,val)           WMI_SET_BITS((ptr)->dcc_stats, 16, 11, val)
+#define WMI_NDL_PACKET_ARRIVAL_RATE_GET(ptr)        WMI_GET_BITS((ptr)->packet_stats, 0, 14)
+#define WMI_NDL_PACKET_ARRIVAL_RATE_SET(ptr,val)    WMI_SET_BITS((ptr)->packet_stats, 0, 14, val)
+#define WMI_NDL_PACKET_AVG_DURATION_GET(ptr)        WMI_GET_BITS((ptr)->packet_stats, 14, 12)
+#define WMI_NDL_PACKET_AVG_DURATION_SET(ptr,val)    WMI_SET_BITS((ptr)->packet_stats, 14, 12, val)
+#define WMI_NDL_CHANNEL_BUSY_TIME_GET(ptr)          WMI_GET_BITS((ptr)->channel_busy_time, 0, 11)
+#define WMI_NDL_CHANNEL_BUSY_TIME_SET(ptr,val)      WMI_SET_BITS((ptr)->channel_busy_time, 0, 11, val)
+
+#define WMI_NDL_TX_PACKET_ARRIVAL_RATE_GET(ptr,acprio)          wmi_packed_arr_get_bits((ptr)->tx_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE)
+#define WMI_NDL_TX_PACKET_ARRIVAL_RATE_SET(ptr,acprio,val)      wmi_packed_arr_set_bits((ptr)->tx_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE, val)
+#define WMI_NDL_TX_PACKET_AVG_DURATION_GET(ptr,acprio)          wmi_packed_arr_get_bits((ptr)->tx_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION)
+#define WMI_NDL_TX_PACKET_AVG_DURATION_SET(ptr,acprio,val)      wmi_packed_arr_set_bits((ptr)->tx_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION, val)
+#define WMI_NDL_TX_CHANNEL_USE_GET(ptr,acprio)                  wmi_packed_arr_get_bits((ptr)->tx_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE)
+#define WMI_NDL_TX_CHANNEL_USE_SET(ptr,acprio,val)              wmi_packed_arr_set_bits((ptr)->tx_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE, val)
+#define WMI_NDL_TX_SIGNAL_AVG_POWER_GET(ptr,acprio)             wmi_packed_arr_get_bits((ptr)->tx_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER)
+#define WMI_NDL_TX_SIGNAL_AVG_POWER_SET(ptr,acprio,val)         wmi_packed_arr_set_bits((ptr)->tx_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val)
+
+/** Bitmap for DCC stats. */
+typedef enum {
+    DCC_STATS_DEMODULATION_MODEL = 1,
+    DCC_STATS_COMMUNICATION_RANGES = 2,
+    DCC_STATS_CHANNEL_LOAD_MEASURES = 4,
+    DCC_STATS_TRANSMIT_PACKET_STATS = 8,
+    DCC_STATS_TRANSMIT_MODEL_PARAMETER = 16,
+    DCC_STATS_ALL = 0xff,
+} wmi_dcc_stats_bitmap;
+
+/** Data structure for getting the DCC stats. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_get_stats_cmd_fixed_param */
+    A_UINT32 tlv_header;
+
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+
+    /** The number of channels for which stats are being requested. */
+    A_UINT32 num_channels;
+
+    /** This is followed by a TLV array of wmi_dcc_channel_stats_request. */
+} wmi_dcc_get_stats_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_channel_stats_request */
+    A_UINT32 tlv_header;
+
+    /** The channel for which this applies. */
+    A_UINT32 chan_freq; /* MHz units */
+
+    /** The DCC stats being requested. */
+    A_UINT32 dcc_stats_bitmap;
+} wmi_dcc_channel_stats_request;
+
+/** Data structure for the response with the DCC stats. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_get_stats_resp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /** Number of channels in the response. */
+    A_UINT32 num_channels;
+    /** This is followed by a TLV array of wmi_dcc_ndl_stats_per_channel. */
+} wmi_dcc_get_stats_resp_event_fixed_param;
+
+/** Data structure for clearing the DCC stats. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_clear_stats_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    A_UINT32 dcc_stats_bitmap;
+} wmi_dcc_clear_stats_cmd_fixed_param;
+
+/** Data structure for the pushed DCC stats */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_stats_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /** The number of channels in the response. */
+    A_UINT32 num_channels;
+
+    /** This is followed by a TLV array of wmi_dcc_ndl_stats_per_channel. */
+} wmi_dcc_stats_event_fixed_param;
+
+/** Data structure for updating NDL per channel. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_ndl_chan */
+    A_UINT32 tlv_header;
+
+    /**
+     * Channel frequency, 16 bits
+     * NDL_numActiveState, ndlType_numberElements, 1+6 bits
+     */
+    A_UINT32 chan_info;
+
+    /**
+     *  NDL_minDccSampling, 10 bits.
+     *      Maximum time interval between subsequent checks of the DCC rules.
+     */
+    A_UINT32 ndl_min_dcc_sampling;
+
+    /**
+     * dcc_enable, 1 bit.
+     * dcc_stats_enable, 1 bit.
+     * dcc_stats_interval, 16 bits.
+     */
+    A_UINT32 dcc_flags;
+
+    /** General DCC configuration. */
+    /**
+     * NDL_timeUp, ndlType_timing, 1+12 bits.
+     * NDL_timeDown, ndlType_timing, 1+12 bits.
+     */
+    A_UINT32 general_config;
+
+    /** Transmit power thresholds. */
+    /**
+     * NDL_minTxPower, ndlType_txPower, 1+7 bits.
+     * NDL_maxTxPower, ndlType_txPower, 1+7 bits.
+     */
+    A_UINT32 min_max_tx_power; /* see "ETSI TS 102 687" table above for units */
+    /**
+     * NDL_defTxPower(AC_BK), ndlType_txPower, 1+7 bits.
+     * NDL_defTxPower(AC_BE), ndlType_txPower, 1+7 bits.
+     * NDL_defTxPower(AC_VI), ndlType_txPower, 1+7 bits.
+     * NDL_defTxPower(AC_VO), ndlType_txPower, 1+7 bits.
+     */
+    /* see "ETSI TS 102 687" table above for units */
+    A_UINT32 def_tx_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_TXPOWER)];
+
+    /** Packet timing thresholds. */
+    /**
+     * NDL_maxPacketDuration(AC_BK), ndlType_packetDuration, 1+11 bits.
+     * NDL_maxPacketDuration(AC_BE), ndlType_packetDuration, 1+11 bits.
+     * NDL_maxPacketDuration(AC_VI), ndlType_packetDuration, 1+11 bits.
+     * NDL_maxPacketDuration(AC_VO), ndlType_packetDuration, 1+11 bits.
+     */
+    A_UINT32 max_packet_duration_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_PACKETDURATION)];
+    /**
+     * NDL_minPacketInterval, ndlType_packetInterval, 1+10 bits.
+     * NDL_maxPacketInterval, ndlType_packetInterval, 1+10 bits.
+     */
+    A_UINT32 min_max_packet_interval;
+    /**
+     * NDL_defPacketInterval(AC_BK), ndlType_packetInterval, 1+10 bits.
+     * NDL_defPacketInterval(AC_BE), ndlType_packetInterval, 1+10 bits.
+     * NDL_defPacketInterval(AC_VI), ndlType_packetInterval, 1+10 bits.
+     * NDL_defPacketInterval(AC_VO), ndlType_packetInterval, 1+10 bits.
+     */
+    A_UINT32 def_packet_interval_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_PACKETINTERVAL)];
+
+    /** Packet datarate thresholds. */
+    /**
+     * NDL_minDatarate, ndlType_datarate, 1+3 bits.
+     * NDL_maxDatarate, ndlType_datarate, 1+3 bits.
+     */
+    A_UINT32 min_max_datarate;
+    /**
+     * NDL_defDatarate(AC_BK), ndlType_datarate, 1+3 bits.
+     * NDL_defDatarate(AC_BE), ndlType_datarate, 1+3 bits.
+     * NDL_defDatarate(AC_VI), ndlType_datarate, 1+3 bits.
+     * NDL_defDatarate(AC_VO), ndlType_datarate, 1+3 bits.
+     */
+    A_UINT32 def_datarate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC,SIZE_NDLTYPE_DATARATE)];
+
+    /** Receive signal thresholds. */
+    /**
+     * NDL_minCarrierSense, ndlType_rxPower, 1+7 bits.
+     * NDL_maxCarrierSense, ndlType_rxPower, 1+7 bits.
+     * NDL_defCarrierSense, ndlType_rxPower, 1+7 bits.
+     */
+    A_UINT32 min_max_def_carrier_sense;
+
+    /** Receive model parameter. */
+    /**
+     * NDL_defDccSensitivity, ndlType_rxPower, 1+7 bits.
+     * NDL_maxCsRange, ndlType_distance, 1+12 bits.
+     * NDL_refPathLoss, ndlType_pathloss, 1+5 bits.
+     */
+    A_UINT32 receive_model_parameter;
+
+    /**
+     * NDL_minSNR, ndlType_snr, 1+7 bits.
+     */
+    A_UINT32 receive_model_parameter_2;
+
+    /** Demodulation model parameters. */
+    /**
+     * NDL_snrBackoff(MCS0), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS1), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS2), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS3), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS4), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS5), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS6), ndlType_snr, 1+7 bits.
+     * NDL_snrBackoff(MCS7), ndlType_snr, 1+7 bits.
+     */
+    A_UINT32 snr_backoff_mcs[WMI_PACKED_ARR_SIZE(MCS_COUNT,SIZE_NDLTYPE_SNR)];
+
+    /** Transmit model parameters. */
+    /**
+     * NDL_tmPacketArrivalRate(AC_BK), ndlType_arrivalRate, 1+13 bits.
+     * NDL_tmPacketArrivalRate(AC_BE), ndlType_arrivalRate, 1+13 bits.
+     * NDL_tmPacketArrivalRate(AC_VI), ndlType_arrivalRate, 1+13 bits.
+     * NDL_tmPacketArrivalRate(AC_VO), ndlType_arrivalRate, 1+13 bits.
+     */
+    A_UINT32 tm_packet_arrival_rate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_ARRIVALRATE)];
+    /**
+     * NDL_tmPacketAvgDuration(AC_BK), ndlType_packetDuration, 1+11 bits.
+     * NDL_tmPacketAvgDuration(AC_BE), ndlType_packetDuration, 1+11 bits.
+     * NDL_tmPacketAvgDuration(AC_VI), ndlType_packetDuration, 1+11 bits.
+     * NDL_tmPacketAvgDuration(AC_VO), ndlType_packetDuration, 1+11 bits.
+     */
+    A_UINT32 tm_packet_avg_duration_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_PACKETDURATION)];
+    /**
+     * NDL_tmSignalAvgPower(AC_BK), ndlType_txPower, 1+7 bits.
+     * NDL_tmSignalAvgPower(AC_BE), ndlType_txPower, 1+7 bits.
+     * NDL_tmSignalAvgPower(AC_VI), ndlType_txPower, 1+7 bits.
+     * NDL_tmSignalAvgPower(AC_VO), ndlType_txPower, 1+7 bits.
+     */
+    A_UINT32 tm_signal_avg_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_TXPOWER)];
+    /**
+     * NDL_tmMaxChannelUse, ndlType_channelUse, 1+13 bits.
+     */
+    A_UINT32 tm_max_channel_use;
+    /**
+     * NDL_tmChannelUse(AC_BK), ndlType_channelUse, 1+13 bits.
+     * NDL_tmChannelUse(AC_BE), ndlType_channelUse, 1+13 bits.
+     * NDL_tmChannelUse(AC_VI), ndlType_channelUse, 1+13 bits.
+     * NDL_tmChannelUse(AC_VO), ndlType_channelUse, 1+13 bits.
+     */
+    A_UINT32 tm_channel_use_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_CHANNELUSE)];
+
+    /** Channel load thresholds. */
+    /**
+     * NDL_minChannelLoad, ndlType_channelLoad, 1+10 bits.
+     * NDL_maxChannelLoad, ndlType_channelLoad, 1+10 bits.
+     */
+    A_UINT32 min_max_channel_load;
+
+    /** Transmit queue parameters. */
+    /**
+     * NDL_numQueue, ndlType_acPrio, 1+3 bits.
+     * NDL_refQueueStatus(AC_BK), ndlType_queueStatus, 1+1 bit.
+     * NDL_refQueueStatus(AC_BE), ndlType_queueStatus, 1+1 bit.
+     * NDL_refQueueStatus(AC_VI), ndlType_queueStatus, 1+1 bit.
+     * NDL_refQueueStatus(AC_VO), ndlType_queueStatus, 1+1 bit.
+     */
+    A_UINT32 transmit_queue_parameters;
+
+    /**
+     * NDL_refQueueLen(AC_BK), ndlType_numberElements, 1+6 bits.
+     * NDL_refQueueLen(AC_BE), ndlType_numberElements, 1+6 bits.
+     * NDL_refQueueLen(AC_VI), ndlType_numberElements, 1+6 bits.
+     * NDL_refQueueLen(AC_VO), ndlType_numberElements, 1+6 bits.
+     */
+    A_UINT32 numberElements[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_NUMBERELEMENTS)];
+
+} wmi_dcc_ndl_chan;
+
+#define WMI_CHAN_FREQ_GET(ptr)                  WMI_GET_BITS((ptr)->chan_info, 0, 16)
+#define WMI_CHAN_FREQ_SET(ptr,val)              WMI_SET_BITS((ptr)->chan_info, 0, 16, val)
+#define WMI_NDL_NUM_ACTIVE_STATE_GET(ptr)       WMI_GET_BITS((ptr)->chan_info, 16, 7)
+#define WMI_NDL_NUM_ACTIVE_STATE_SET(ptr,val)   WMI_SET_BITS((ptr)->chan_info, 16, 7, val)
+
+#define WMI_NDL_MIN_DCC_SAMPLING_GET(ptr)       WMI_GET_BITS((ptr)->ndl_min_dcc_sampling, 0, 10)
+#define WMI_NDL_MIN_DCC_SAMPLING_SET(ptr,val)   WMI_SET_BITS((ptr)->ndl_min_dcc_sampling, 0, 10, val)
+#define WMI_NDL_MEASURE_INTERVAL_GET(ptr)       WMI_GET_BITS((ptr)->ndl_min_dcc_sampling, 10, 16)
+#define WMI_NDL_MEASURE_INTERVAL_SET(ptr,val)   WMI_SET_BITS((ptr)->ndl_min_dcc_sampling, 10, 16, val)
+
+#define WMI_NDL_DCC_ENABLE_GET(ptr)             WMI_GET_BITS((ptr)->dcc_flags, 0, 1)
+#define WMI_NDL_DCC_ENABLE_SET(ptr,val)         WMI_SET_BITS((ptr)->dcc_flags, 0, 1, val)
+#define WMI_NDL_DCC_STATS_ENABLE_GET(ptr)       WMI_GET_BITS((ptr)->dcc_flags, 1, 1)
+#define WMI_NDL_DCC_STATS_ENABLE_SET(ptr,val)   WMI_SET_BITS((ptr)->dcc_flags, 1, 1, val)
+#define WMI_NDL_DCC_STATS_INTERVAL_GET(ptr)     WMI_GET_BITS((ptr)->dcc_flags, 2, 16)
+#define WMI_NDL_DCC_STATS_INTERVAL_SET(ptr,val) WMI_SET_BITS((ptr)->dcc_flags, 2, 16, val)
+
+#define WMI_NDL_TIME_UP_GET(ptr)                WMI_GET_BITS((ptr)->general_config, 0, 13)
+#define WMI_NDL_TIME_UP_SET(ptr,val)            WMI_SET_BITS((ptr)->general_config, 0, 13, val)
+#define WMI_NDL_TIME_DOWN_GET(ptr)              WMI_GET_BITS((ptr)->general_config, 13, 13)
+#define WMI_NDL_TIME_DOWN_SET(ptr,val)          WMI_SET_BITS((ptr)->general_config, 13, 13, val)
+
+#define WMI_NDL_MIN_TX_POWER_GET(ptr)       WMI_GET_BITS((ptr)->min_max_tx_power, 0, 8)
+#define WMI_NDL_MIN_TX_POWER_SET(ptr,val)   WMI_SET_BITS((ptr)->min_max_tx_power, 0, 8, val)
+#define WMI_NDL_MAX_TX_POWER_GET(ptr)       WMI_GET_BITS((ptr)->min_max_tx_power, 8, 8)
+#define WMI_NDL_MAX_TX_POWER_SET(ptr,val)   WMI_SET_BITS((ptr)->min_max_tx_power, 8, 8, val)
+
+#define WMI_NDL_DEF_TX_POWER_GET(ptr,acprio)        wmi_packed_arr_get_bits((ptr)->def_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER)
+#define WMI_NDL_DEF_TX_POWER_SET(ptr,acprio,val)    wmi_packed_arr_set_bits((ptr)->def_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val)
+
+#define WMI_NDL_MAX_PACKET_DURATION_GET(ptr,acprio)     wmi_packed_arr_get_bits((ptr)->max_packet_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION)
+#define WMI_NDL_MAX_PACKET_DURATION_SET(ptr,acprio,val) wmi_packed_arr_set_bits((ptr)->max_packet_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION, val)
+#define WMI_NDL_MIN_PACKET_INTERVAL_GET(ptr)            WMI_GET_BITS((ptr)->min_max_packet_interval, 0, 11)
+#define WMI_NDL_MIN_PACKET_INTERVAL_SET(ptr,val)        WMI_SET_BITS((ptr)->min_max_packet_interval, 0, 11, val)
+#define WMI_NDL_MAX_PACKET_INTERVAL_GET(ptr)            WMI_GET_BITS((ptr)->min_max_packet_interval, 11, 11)
+#define WMI_NDL_MAX_PACKET_INTERVAL_SET(ptr,val)        WMI_SET_BITS((ptr)->min_max_packet_interval, 11, 11, val)
+#define WMI_NDL_DEF_PACKET_INTERVAL_GET(ptr,acprio)     wmi_packed_arr_get_bits((ptr)->def_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL)
+#define WMI_NDL_DEF_PACKET_INTERVAL_SET(ptr,acprio,val) wmi_packed_arr_set_bits((ptr)->def_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL, val)
+
+#define WMI_NDL_MIN_DATARATE_GET(ptr)               WMI_GET_BITS((ptr)->min_max_datarate, 0, 4)
+#define WMI_NDL_MIN_DATARATE_SET(ptr,val)           WMI_SET_BITS((ptr)->min_max_datarate, 0, 4, val)
+#define WMI_NDL_MAX_DATARATE_GET(ptr)               WMI_GET_BITS((ptr)->min_max_datarate, 4, 4)
+#define WMI_NDL_MAX_DATARATE_SET(ptr,val)           WMI_SET_BITS((ptr)->min_max_datarate, 4, 4, val)
+#define WMI_NDL_DEF_DATARATE_GET(ptr,acprio)        wmi_packed_arr_get_bits((ptr)->def_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE)
+#define WMI_NDL_DEF_DATARATE_SET(ptr,acprio,val)    wmi_packed_arr_set_bits((ptr)->def_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE, val)
+
+#define WMI_NDL_MIN_CARRIER_SENSE_GET(ptr)      WMI_GET_BITS((ptr)->min_max_def_carrier_sense, 0, 8)
+#define WMI_NDL_MIN_CARRIER_SENSE_SET(ptr,val)  WMI_SET_BITS((ptr)->min_max_def_carrier_sense, 0, 8, val)
+#define WMI_NDL_MAX_CARRIER_SENSE_GET(ptr)      WMI_GET_BITS((ptr)->min_max_def_carrier_sense, 8, 8)
+#define WMI_NDL_MAX_CARRIER_SENSE_SET(ptr,val)  WMI_SET_BITS((ptr)->min_max_def_carrier_sense, 8, 8, val)
+#define WMI_NDL_DEF_CARRIER_SENSE_GET(ptr)      WMI_GET_BITS((ptr)->min_max_def_carrier_sense, 16, 8)
+#define WMI_NDL_DEF_CARRIER_SENSE_SET(ptr,val)  WMI_SET_BITS((ptr)->min_max_def_carrier_sense, 16, 8, val)
+
+#define WMI_NDL_DEF_DCC_SENSITIVITY_GET(ptr)        WMI_GET_BITS((ptr)->receive_model_parameter, 0, 8)
+#define WMI_NDL_DEF_DCC_SENSITIVITY_SET(ptr,val)    WMI_SET_BITS((ptr)->receive_model_parameter, 0, 8, val)
+#define WMI_NDL_MAX_CS_RANGE_GET(ptr)               WMI_GET_BITS((ptr)->receive_model_parameter, 8, 13)
+#define WMI_NDL_MAX_CS_RANGE_SET(ptr,val)           WMI_SET_BITS((ptr)->receive_model_parameter, 8, 13, val)
+#define WMI_NDL_REF_PATH_LOSS_GET(ptr)              WMI_GET_BITS((ptr)->receive_model_parameter, 21, 6)
+#define WMI_NDL_REF_PATH_LOSS_SET(ptr,val)          WMI_SET_BITS((ptr)->receive_model_parameter, 21, 6, val)
+
+#define WMI_NDL_MIN_SNR_GET(ptr)                    WMI_GET_BITS((ptr)->receive_model_parameter_2, 0, 8)
+#define WMI_NDL_MIN_SNR_SET(ptr,val)                WMI_SET_BITS((ptr)->receive_model_parameter_2, 0, 8, val)
+
+#define WMI_NDL_SNR_BACKOFF_GET(ptr,mcs)        wmi_packed_arr_get_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR)
+#define WMI_NDL_SNR_BACKOFF_SET(ptr,mcs,val)    wmi_packed_arr_set_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR, val)
+
+#define WMI_NDL_TM_PACKET_ARRIVAL_RATE_GET(ptr,acprio)      wmi_packed_arr_get_bits((ptr)->tm_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE)
+#define WMI_NDL_TM_PACKET_ARRIVAL_RATE_SET(ptr,acprio,val)  wmi_packed_arr_set_bits((ptr)->tm_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE, val)
+#define WMI_NDL_TM_PACKET_AVG_DURATION_GET(ptr,acprio)      wmi_packed_arr_get_bits((ptr)->tm_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION)
+#define WMI_NDL_TM_PACKET_AVG_DURATION_SET(ptr,acprio,val)  wmi_packed_arr_set_bits((ptr)->tm_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION, val)
+#define WMI_NDL_TM_SIGNAL_AVG_POWER_GET(ptr,acprio)         wmi_packed_arr_get_bits((ptr)->tm_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER)
+#define WMI_NDL_TM_SIGNAL_AVG_POWER_SET(ptr,acprio,val)     wmi_packed_arr_set_bits((ptr)->tm_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val)
+#define WMI_NDL_TM_MAX_CHANNEL_USE_GET(ptr)                 WMI_GET_BITS((ptr)->tm_max_channel_use, 0, 14)
+#define WMI_NDL_TM_MAX_CHANNEL_USE_SET(ptr,val)             WMI_SET_BITS((ptr)->tm_max_channel_use, 0, 14, val)
+#define WMI_NDL_TM_CHANNEL_USE_GET(ptr,acprio)              wmi_packed_arr_get_bits((ptr)->tm_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE)
+#define WMI_NDL_TM_CHANNEL_USE_SET(ptr,acprio,val)          wmi_packed_arr_set_bits((ptr)->tm_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE, val)
+
+#define WMI_NDL_MIN_CHANNEL_LOAD_GET(ptr)       WMI_GET_BITS((ptr)->min_max_channel_load, 0, 11)
+#define WMI_NDL_MIN_CHANNEL_LOAD_SET(ptr,val)   WMI_SET_BITS((ptr)->min_max_channel_load, 0, 11, val)
+#define WMI_NDL_MAX_CHANNEL_LOAD_GET(ptr)       WMI_GET_BITS((ptr)->min_max_channel_load, 11, 11)
+#define WMI_NDL_MAX_CHANNEL_LOAD_SET(ptr,val)   WMI_SET_BITS((ptr)->min_max_channel_load, 11, 11, val)
+
+#define WMI_NDL_NUM_QUEUE_GET(ptr)                      WMI_GET_BITS((ptr)->transmit_queue_parameters, 0, 4)
+#define WMI_NDL_NUM_QUEUE_SET(ptr,val)                  WMI_SET_BITS((ptr)->transmit_queue_parameters, 0, 4, val)
+#define WMI_NDL_REF_QUEUE_STATUS_GET(ptr,acprio)        WMI_GET_BITS((ptr)->transmit_queue_parameters, (4 + (acprio * 2)), 2)
+#define WMI_NDL_REF_QUEUE_STATUS_SET(ptr,acprio,val)    WMI_SET_BITS((ptr)->transmit_queue_parameters, (4 + (acprio * 2)), 2, val)
+#define WMI_NDL_REF_QUEUE_LEN_GET(ptr,acprio)           wmi_packed_arr_get_bits((ptr)->numberElements, acprio, SIZE_NDLTYPE_NUMBERELEMENTS)
+#define WMI_NDL_REF_QUEUE_LEN_SET(ptr,acprio,val)       wmi_packed_arr_set_bits((ptr)->numberElements, acprio, SIZE_NDLTYPE_NUMBERELEMENTS, val)
+
+/** Data structure for updating the NDL. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_update_ndl_cmd_fixed_param */
+    A_UINT32 tlv_header;
+
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+
+    /** The number of channels in the request. */
+    A_UINT32 num_channel;
+
+    /** This is followed by a TLV array of wmi_dcc_ndl_chan. */
+    /** This is followed by a TLV array of wmi_dcc_ndl_active_state_config. */
+} wmi_dcc_update_ndl_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_dcc_update_ndl_resp_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    A_UINT32 status;
+} wmi_dcc_update_ndl_resp_event_fixed_param;
+
+/* Actions for TSF timestamp */
+typedef enum {
+    TSF_TSTAMP_CAPTURE_REQ = 1,
+    TSF_TSTAMP_CAPTURE_RESET = 2,
+    TSF_TSTAMP_READ_VALUE = 3,
+    TSF_TSTAMP_QTIMER_CAPTURE_REQ = 4,
+} wmi_tsf_tstamp_action;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /* action type, refer to wmi_tsf_tstamp_action */
+    A_UINT32 tsf_action;
+} wmi_vdev_tsf_tstamp_action_cmd_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_vdev_tsf_report_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /* low 32bit of tsf */
+    A_UINT32 tsf_low;
+    /* high 32 bit of tsf */
+    A_UINT32 tsf_high;
+    /* low 32 bits of qtimer */
+    A_UINT32 qtimer_low;
+    /* high 32 bits of qtimer */
+    A_UINT32 qtimer_high;
+} wmi_vdev_tsf_report_event_fixed_param;
+
+/* ie_id values:
+ * 0 to 255 are used for individual IEEE802.11 Information Element types
+ */
+#define WMI_SET_VDEV_IE_ID_SCAN_SET_DEFAULT_IE 256
+
+/* source values: */
+#define WMI_SET_VDEV_IE_SOURCE_HOST     0x0
+
+/* band values: */
+typedef enum {
+    WMI_SET_VDEV_IE_BAND_ALL = 0,
+    WMI_SET_VDEV_IE_BAND_2_4GHZ,
+    WMI_SET_VDEV_IE_BAND_5GHZ,
+} wmi_set_vdev_ie_band;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_ie_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** unique id to identify the ie_data as defined by ieee 802.11 spec */
+    A_UINT32 ie_id;
+    /** ie_len corresponds to num of bytes in ie_data[] */
+    A_UINT32 ie_len;
+    /** source of this command */
+    A_UINT32 ie_source; /* see WMI_SET_VDEV_IE_SOURCE_ defs */
+    /** band for this IE - se wmi_set_vdev_ie_band enum */
+    A_UINT32 band;
+   /**
+    * Following this structure is the TLV byte stream of ie data of length ie_buf_len:
+    * A_UINT8 ie_data[];
+    *
+    */
+} wmi_vdev_set_ie_cmd_fixed_param;
+
+/* DEPRECATED - use wmi_pdev_set_pcl_cmd_fixed_param instead */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_soc_set_pcl_cmd_fixed_param */
+    /** Set Preferred Channel List  **/
+
+    /** # of channels to scan */
+    A_UINT32 num_chan;
+/**
+ * TLV (tag length value) parameters follow the wmi_soc_set_pcl_cmd
+ * structure. The TLV's are:
+ *     A_UINT32 channel_list[];
+ **/
+} wmi_soc_set_pcl_cmd_fixed_param;
+
+/* Values for channel_weight */
+typedef enum {
+    WMI_PCL_WEIGHT_DISALLOW  = 0,
+    WMI_PCL_WEIGHT_LOW       = 1,
+    WMI_PCL_WEIGHT_MEDIUM    = 2,
+    WMI_PCL_WEIGHT_HIGH      = 3,
+    WMI_PCL_WEIGHT_VERY_HIGH = 4,
+} wmi_pcl_chan_weight;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_pcl_cmd_fixed_param */
+    /** Set Preferred Channel List  **/
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    /** # of channels to scan */
+    A_UINT32 num_chan;
+/**
+ * TLV (tag length value) parameters follow the wmi_soc_set_pcl_cmd
+        12930    * structure. The TLV's are:
+ *     A_UINT32 channel_weight[];  channel order & size will be as per the list provided in WMI_SCAN_CHAN_LIST_CMDID
+ **/
+} wmi_pdev_set_pcl_cmd_fixed_param;
+
+/* DEPRECATED - use wmi_pdev_set_hw_mode_cmd_fixed_param instead */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_cmd_fixed_param */
+    /**  Set Hardware Mode  **/
+
+    /* Hardware Mode Index */
+    A_UINT32 hw_mode_index;
+} wmi_soc_set_hw_mode_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_cmd_fixed_param */
+    /**  Set Hardware Mode  **/
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    /* Hardware Mode Index */
+    A_UINT32 hw_mode_index;
+} wmi_pdev_set_hw_mode_cmd_fixed_param;
+
+/* DEPRECATED - use wmi_pdev_set_dual_mac_config_cmd_fixed_param instead */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_cmd_fixed_param */
+    /**  Set Dual MAC Firmware Configuration  **/
+
+    /* Concurrent scan configuration bits */
+    A_UINT32 concurrent_scan_config_bits;
+    /* Firmware mode configuration bits */
+    A_UINT32 fw_mode_config_bits;
+} wmi_soc_set_dual_mac_config_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_cmd_fixed_param */
+    /**  Set Dual MAC Firmware Configuration  **/
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    /* Concurrent scan configuration bits */
+    A_UINT32 concurrent_scan_config_bits;
+    /* Firmware mode configuration bits */
+    A_UINT32 fw_mode_config_bits;
+} wmi_pdev_set_mac_config_cmd_fixed_param;
+
+typedef struct { /* DEPRECATED */
+    A_UINT32 num_tx_chains;
+    A_UINT32 num_rx_chains;
+    A_UINT32 reserved[2];
+} soc_num_tx_rx_chains;
+
+typedef struct {
+    A_UINT32 num_tx_chains_2g;
+    A_UINT32 num_rx_chains_2g;
+    A_UINT32 num_tx_chains_5g;
+    A_UINT32 num_rx_chains_5g;
+} band_num_tx_rx_chains;
+
+typedef union { /* DEPRECATED */
+    soc_num_tx_rx_chains soc_txrx_chain_setting;
+    band_num_tx_rx_chains band_txrx_chain_setting;
+} antenna_num_tx_rx_chains;
+
+typedef enum {
+    ANTENNA_MODE_DISABLED = 0x0,
+    ANTENNA_MODE_LOW_POWER_LOCATION_SCAN = 0x01,
+    /* reserved */
+} antenna_mode_reason;
+
+/* DEPRECATED - use wmi_pdev_set_antenna_mode_cmd_fixed_param instead */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len;  tag equals WMITLV_TAG_STRUC_wmi_soc_set_antenna_mode_cmd_fixed_param */
+
+    /* the reason for setting antenna mode, refer antenna_mode_reason */
+    A_UINT32 reason;
+
+    /*
+     * The above reason parameter will select whether the following union
+     * is soc_num_tx_rx_chains or band_num_tx_rx_chains.
+     */
+    antenna_num_tx_rx_chains num_txrx_chains_setting;
+} wmi_soc_set_antenna_mode_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len;  tag equals WMITLV_TAG_STRUC_wmi_pdev_set_antenna_mode_cmd_fixed_param */
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    /* Bits 0-15 is the number of RX chains and 16-31 is the number of TX chains */
+    A_UINT32 num_txrx_chains;
+} wmi_pdev_set_antenna_mode_cmd_fixed_param;
+
+/** Data structure for information specific to a VDEV to MAC mapping. */
+/* DEPRECATED - use wmi_pdev_set_hw_mode_response_vdev_mac_entry instead */
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_response_vdev_mac_entry */
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id; /* VDEV ID */
+    A_UINT32 mac_id; /* MAC ID */
+} wmi_soc_set_hw_mode_response_vdev_mac_entry;
+
+/** Data structure for information specific to a VDEV to MAC mapping. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_response_vdev_mac_entry */
+    A_UINT32 tlv_header;
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    A_UINT32 vdev_id;
+} wmi_pdev_set_hw_mode_response_vdev_mac_entry;
+
+/* DEPRECATED - use wmi_pdev_set_hw_mode_response_event_fixed_param instead */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_response_event_fixed_param */
+    /**  Set Hardware Mode Response Event  **/
+
+    /* Status of set_hw_mode command */
+    /*
+     * Values for Status:
+     *  0 - OK; command successful
+     *  1 - EINVAL; Requested invalid hw_mode
+     *  2 - ECANCELED; HW mode change canceled
+     *  3 - ENOTSUP; HW mode not supported
+     *  4 - EHARDWARE; HW mode change prevented by hardware
+     *  5 - EPENDING; HW mode change is pending
+     *  6 - ECOEX; HW mode change conflict with Coex
+     */
+    A_UINT32 status;
+    /* Configured Hardware Mode */
+    A_UINT32 cfgd_hw_mode_index;
+    /* Number of Vdev to Mac entries */
+    A_UINT32 num_vdev_mac_entries;
+
+/**
+ * TLV (tag length value) parameters follow the soc_set_hw_mode_response_event
+ * structure. The TLV's are:
+ *      A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[];
+ */
+} wmi_soc_set_hw_mode_response_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_response_event_fixed_param */
+    /**  Set Hardware Mode Response Event  **/
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    /* Status of set_hw_mode command */
+    /*
+     * Values for Status:
+     *  0 - OK; command successful
+     *  1 - EINVAL; Requested invalid hw_mode
+     *  2 - ECANCELED; HW mode change canceled
+     *  3 - ENOTSUP; HW mode not supported
+     *  4 - EHARDWARE; HW mode change prevented by hardware
+     *  5 - EPENDING; HW mode change is pending
+     *  6 - ECOEX; HW mode change conflict with Coex
+     */
+    A_UINT32 status;
+    /* Configured Hardware Mode */
+    A_UINT32 cfgd_hw_mode_index;
+    /* Number of Vdev to Mac entries */
+    A_UINT32 num_vdev_mac_entries;
+/**
+ * TLV (tag length value) parameters follow the soc_set_hw_mode_response_event
+ * structure. The TLV's are:
+ *      A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[];
+ */
+} wmi_pdev_set_hw_mode_response_event_fixed_param;
+
+/* DEPRECATED - use wmi_pdev_hw_mode_transition_event_fixed_param instead */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_soc_hw_mode_transition_event_fixed_param */
+    /**  Hardware Mode Transition Event **/
+
+    /* Original or old Hardware mode */
+    A_UINT32 old_hw_mode_index;
+    /* New Hardware Mode */
+    A_UINT32 new_hw_mode_index;
+    /* Number of Vdev to Mac entries */
+    A_UINT32 num_vdev_mac_entries;
+
+/**
+ * TLV (tag length value) parameters follow the soc_set_hw_mode_response_event
+ * structure. The TLV's are:
+ *      A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[];
+ */
+} wmi_soc_hw_mode_transition_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_hw_mode_transition_event_fixed_param */
+    /**  Hardware Mode Transition Event **/
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    /* Original or old Hardware mode */
+    A_UINT32 old_hw_mode_index;
+    /* New Hardware Mode */
+    A_UINT32 new_hw_mode_index;
+    /* Number of Vdev to Mac entries */
+    A_UINT32 num_vdev_mac_entries;
+
+/**
+ * TLV (tag length value) parameters follow the soc_set_hw_mode_response_event
+ * structure. The TLV's are:
+ *      A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[];
+ */
+} wmi_pdev_hw_mode_transition_event_fixed_param;
+
+/**
+ * This command is sent from WLAN host driver to firmware for
+ * plugging in reorder queue desc to lithium hw.
+ *
+ * Example: plug-in queue desc for TID 5
+ *    host->target: WMI_PEER_REORDER_QUEUE_SETUP_CMDID,
+ *                  (vdev_id = PEER vdev id,
+ *                   peer_macaddr = PEER mac addr,
+ *                   tid = 5,
+ *                   queue_ptr_lo = queue desc addr lower 32 bits,
+ *                   queue_ptr_hi = queue desc addr higher 32 bits,
+ *                   queue_no = 16-bit number assigned by host for queue,
+ *                              stored in bits 15:0 of queue_no field)
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_reorder_queue_setup_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    wmi_mac_addr peer_macaddr; /* peer mac address */
+    A_UINT32 tid; /* 0 to 15 = QoS TIDs, 16 = non-qos TID */
+    A_UINT32 queue_ptr_lo; /* lower 32 bits of queue desc adddress */
+    A_UINT32 queue_ptr_hi; /* upper 32 bits of queue desc adddress */
+    A_UINT32 queue_no; /* 16-bit number assigned by host for queue,
+                          stored in bits 15:0 of queue_no field */
+} wmi_peer_reorder_queue_setup_cmd_fixed_param;
+
+/**
+ * This command is sent from WLAN host driver to firmware for
+ * removing one or more reorder queue desc to lithium hw.
+ *
+ * Example: remove queue desc for all TIDs
+ *    host->target: WMI_PEER_REORDER_REMOVE_CMDID,
+ *                  (vdev_id = PEER vdev id,
+ *                   peer_macaddr = PEER mac addr,
+ *                   tid = 0x1FFFF,
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_reorder_queue_remove_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    wmi_mac_addr peer_macaddr; /* peer mac address */
+    A_UINT32 tid_mask; /* bits 0 to 15 = QoS TIDs, bit 16 = non-qos TID */
+} wmi_peer_reorder_queue_remove_cmd_fixed_param;
+
+
+/* DEPRECATED - use wmi_pdev_set_mac_config_response_event_fixed_param instead */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_response_event_fixed_param */
+    /**  Set Dual MAC Config Response Event  **/
+
+    /* Status for set_dual_mac_config command */
+    /*
+     * Values for Status:
+     *  0 - OK; command successful
+     *  1 - EINVAL; Requested invalid hw_mode
+     *  3 - ENOTSUP; HW mode not supported
+     *  4 - EHARDWARE; HW mode change prevented by hardware
+     *  6 - ECOEX; HW mode change conflict with Coex
+     */
+    A_UINT32 status;
+
+} wmi_soc_set_dual_mac_config_response_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_response_event_fixed_param */
+    /**  Set Dual MAC Config Response Event  **/
+
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+
+    /* Status for set_dual_mac_config command */
+    /*
+     * Values for Status:
+     *  0 - OK; command successful
+     *  1 - EINVAL; Requested invalid hw_mode
+     *  3 - ENOTSUP; HW mode not supported
+     *  4 - EHARDWARE; HW mode change prevented by hardware
+     *  6 - ECOEX; HW mode change conflict with Coex
+     */
+     A_UINT32 status;
+} wmi_pdev_set_mac_config_response_event_fixed_param;
+
+typedef enum {
+    MAWC_MOTION_STATE_UNKNOWN,
+    MAWC_MOTION_STATE_STATIONARY,
+    MAWC_MOTION_STATE_WALK,
+    MAWC_MOTION_STATE_TRANSIT,
+} MAWC_MOTION_STATE;
+
+typedef enum {
+    MAWC_SENSOR_STATUS_OK,
+    MAWC_SENSOR_STATUS_FAILED_TO_ENABLE,
+    MAWC_SENSOR_STATUS_SHUTDOWN,
+} MAWC_SENSOR_STATUS;
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_mawc_sensor_report_ind_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** new motion state, MAWC_MOTION_STATE */
+    A_UINT32 motion_state;
+    /** status code of sensor, MAWC_SENSOR_STATUS */
+    A_UINT32 sensor_status;
+} wmi_mawc_sensor_report_ind_cmd_fixed_param;
+
+/* MBO flag field definition */
+/* Bit 0: 0 - Allow to connect to both MBO and non-MBO AP
+ *        1 - Allow to connect to MBO AP only
+ * Bit 1-31 : reserved.
+ */
+#define WMI_ROAM_MBO_FLAG_MBO_ONLY_MODE  (1<<0) /* DEPRECATED */
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_roam_set_mbo_fixed_param */
+    A_UINT32 tlv_header;
+    /** vdev id */
+    A_UINT32 vdev_id;
+    /** enable or disable MBO */
+    A_UINT32 enable;
+    /** MBO flags, refer to definition of MBO flags*/
+    A_UINT32 flags;
+} wmi_roam_set_mbo_fixed_param; /* DEPRECATED */
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_ARRAY_STRUC */
+    A_UINT32 tlv_header;
+    /** Current operating class number */
+    A_UINT32 cur_op_class;
+    /** Country string of current reg domain,
+     * the expected value should be same as country str defined
+     * in country IE.
+     * 3 octets (COUNTRY_STR) + 1 octet (always 0)
+     * The ordering of this array must be maintained,
+     * even when a big-endian host's WMI messages undergo
+     * automatic byte reordering for conversion to the
+     * little-endian ordering required by the target.
+     * On big-endian hosts, this array may need to be byte-swapped
+     * by the host, so the subsequent automatic byte-swap
+     * will result in the correct final byte order.
+     * global operating class: set country_str[0]=0
+     */
+    A_UINT8 country_str[4];
+    /** Supported operating class number in current regdomain */
+    A_UINT32 supp_op_class_num;
+    /* The TLVs will follow. */
+    /* A_UINT32 supp_op_class_list[] */
+} wmi_supported_operating_class_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_ARRAY_STRUC */
+    A_UINT32 tlv_header;
+    /** non preferred channel attribute length */
+    A_UINT32 non_prefer_ch_attr_len;
+    /* The TLVs will follow. */
+    /** A_UINT8 non_prefer_ch_attr[];*/
+} wmi_mbo_non_preferred_channel_report_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_mawc_enable_sensor_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* enable(1) or disable(0) */
+    A_UINT32 enable;
+} wmi_mawc_enable_sensor_event_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_extscan_configure_mawc_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /* enable(1) or disable(0) MAWC */
+    A_UINT32 enable;
+    /* ratio of skipping suppressing scan, skip one out of x */
+    A_UINT32 suppress_ratio;
+} wmi_extscan_configure_mawc_cmd_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_nlo_configure_mawc_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /* enable(1) or disable(0) MAWC */
+    A_UINT32 enable;
+    /* ratio of exponential backoff, next = current + current*ratio/100 */
+    A_UINT32 exp_backoff_ratio;
+    /* initial scan interval(msec) */
+    A_UINT32 init_scan_interval;
+    /* max scan interval(msec) */
+    A_UINT32 max_scan_interval;
+} wmi_nlo_configure_mawc_cmd_fixed_param;
+
+typedef struct {
+    /* TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_roam_configure_mawc_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /* enable(1) or disable(0) MAWC */
+    A_UINT32 enable;
+    /* data traffic load (kBps) to register CMC */
+    A_UINT32 traffic_load_threshold;
+    /* RSSI threshold (dBm) to scan for Best AP */
+    A_UINT32 best_ap_rssi_threshold;
+    /* high RSSI threshold adjustment in Stationary to suppress scan */
+    A_UINT32 rssi_stationary_high_adjust;
+    /* low RSSI threshold adjustment in Stationary to suppress scan */
+    A_UINT32 rssi_stationary_low_adjust;
+} wmi_roam_configure_mawc_cmd_fixed_param;
+
+#define WMI_PACKET_FILTER_COMPARE_DATA_LEN_DWORD     2
+#define WMI_PACKET_FILTER_MAX_CMP_PER_PACKET_FILTER  5
+
+typedef enum {
+    PACKET_FILTER_TYPE_INVALID = 0,
+    PACKET_FILTER_TYPE_FILTER_PKT,
+    PACKET_FILTER_TYPE_RESERVE_PKT, /* not used */
+    PACKET_FILTER_TYPE_MAX_ENUM_SIZE
+} WMI_PACKET_FILTER_FILTER_TYPE;
+
+typedef enum {
+    PACKET_FILTER_PROTO_TYPE_INVALID = 0,
+
+    /* L2 header */
+    PACKET_FILTER_PROTO_TYPE_MAC,
+    PACKET_FILTER_PROTO_TYPE_SNAP,
+
+    /* L3 header (EtherType) */
+    PACKET_FILTER_PROTO_TYPE_IPV4,
+    PACKET_FILTER_PROTO_TYPE_IPV6,
+
+    /* L4 header (IP protocol) */
+    PACKET_FILTER_PROTO_TYPE_UDP,
+    PACKET_FILTER_PROTO_TYPE_TCP,
+    PACKET_FILTER_PROTO_TYPE_ICMPV6,
+
+    PACKET_FILTER_PROTO_TYPE_MAX
+} WMI_PACKET_FILTER_PROTO_TYPE;
+
+typedef enum {
+    PACKET_FILTER_CMP_TYPE_INVALID = 0,
+    PACKET_FILTER_CMP_TYPE_EQUAL,
+    PACKET_FILTER_CMP_TYPE_MASK_EQUAL,
+    PACKET_FILTER_CMP_TYPE_NOT_EQUAL,
+    PACKET_FILTER_CMP_TYPE_MASK_NOT_EQUAL,
+    PACKET_FILTER_CMP_TYPE_ADDRTYPE,
+    PACKET_FILTER_CMP_TYPE_MAX
+} WMI_PACKET_FILTER_CMP_TYPE;
+
+typedef enum {
+    PACKET_FILTER_SET_INACTIVE = 0,
+    PACKET_FILTER_SET_ACTIVE
+} WMI_PACKET_FILTER_ACTION;
+
+typedef enum {
+    PACKET_FILTER_SET_DISABLE = 0,
+    PACKET_FILTER_SET_ENABLE
+} WMI_PACKET_FILTER_RUNTIME_ENABLE;
+
+typedef struct {
+    A_UINT32  proto_type;
+    A_UINT32  cmp_type;
+    A_UINT32  data_length; /* Length of the data to compare (units = bytes) */
+    A_UINT32  data_offset; /* from start of the respective frame header (units = bytes) */
+    A_UINT32  compareData[WMI_PACKET_FILTER_COMPARE_DATA_LEN_DWORD]; /* Data to compare, little-endian order */
+    A_UINT32  dataMask[WMI_PACKET_FILTER_COMPARE_DATA_LEN_DWORD]; /* Mask to be applied on rcvd packet data before compare, little-endian order */
+} WMI_PACKET_FILTER_PARAMS_TYPE;
+
+typedef struct {
+    A_UINT32  tlv_header;
+    A_UINT32  vdev_id;
+    A_UINT32  filter_id;
+    A_UINT32  filter_action; /* WMI_PACKET_FILTER_ACTION */
+    A_UINT32  filter_type;
+    A_UINT32  num_params; /* how many entries in paramsData are valid */
+    A_UINT32  coalesce_time; /* not currently used - fill with 0x0 */
+    WMI_PACKET_FILTER_PARAMS_TYPE  paramsData[WMI_PACKET_FILTER_MAX_CMP_PER_PACKET_FILTER];
+    /* deprecated0:
+     * This field simply provides filler space to retain the original message
+     * format while reducing WMI_PACKET_FILTER_MAX_CMP_PER_PACKET_FILTER
+     * from 10 to 5.
+     */
+    WMI_PACKET_FILTER_PARAMS_TYPE  deprecated0[5];
+} WMI_PACKET_FILTER_CONFIG_CMD_fixed_param;
+
+/* enable / disable all filters within the specified vdev */
+typedef struct {
+    A_UINT32  tlv_header;
+    A_UINT32  vdev_id;
+    A_UINT32  enable; /* WMI_PACKET_FILTER_RUNTIME_ENABLE */
+} WMI_PACKET_FILTER_ENABLE_CMD_fixed_param;
+
+#define WMI_LRO_INFO_TCP_FLAG_VALS_BITPOS  0
+#define WMI_LRO_INFO_TCP_FLAG_VALS_NUMBITS 9
+
+#define WMI_LRO_INFO_TCP_FLAG_VALS_SET(tcp_flag_u32, tcp_flag_values) \
+    WMI_SET_BITS(tcp_flag_u32, \
+        WMI_LRO_INFO_TCP_FLAG_VALS_BITPOS, \
+        WMI_LRO_INFO_TCP_FLAG_VALS_NUMBITS, \
+        tcp_flag_values)
+#define WMI_LRO_INFO_TCP_FLAG_VALS_GET(tcp_flag_u32) \
+    WMI_GET_BITS(tcp_flag_u32, \
+        WMI_LRO_INFO_TCP_FLAG_VALS_BITPOS, \
+        WMI_LRO_INFO_TCP_FLAG_VALS_NUMBITS)
+
+#define WMI_LRO_INFO_TCP_FLAGS_MASK_BITPOS  9
+#define WMI_LRO_INFO_TCP_FLAGS_MASK_NUMBITS 9
+
+#define WMI_LRO_INFO_TCP_FLAGS_MASK_SET(tcp_flag_u32, tcp_flags_mask) \
+    WMI_SET_BITS(tcp_flag_u32, \
+        WMI_LRO_INFO_TCP_FLAGS_MASK_BITPOS, \
+        WMI_LRO_INFO_TCP_FLAGS_MASK_NUMBITS, \
+        tcp_flags_mask)
+#define WMI_LRO_INFO_TCP_FLAGS_MASK_GET(tcp_flag_u32) \
+    WMI_GET_BITS(tcp_flag_u32, \
+        WMI_LRO_INFO_TCP_FLAGS_MASK_BITPOS, \
+        WMI_LRO_INFO_TCP_FLAGS_MASK_NUMBITS)
+
+typedef struct {
+    A_UINT32 tlv_header;
+    /**
+     * @brief lro_enable - indicates whether lro is enabled
+     * [0] LRO Enable
+     */
+    A_UINT32 lro_enable;
+    /**
+     * @brief tcp_flag_u32 - mask of which TCP flags to check and
+     *      values to check for
+     * [8:0] TCP flag values - If the TCP flags from the packet do not match
+     *       the values in this field after masking with TCP flags mask below,
+     *       LRO eligible will not be set
+     * [17:9] TCP flags mask - Mask field for comparing the TCP values
+     *       provided above with the TCP flags field in the received packet
+     * Use WMI_LRO_INFO_TCP_FLAG_VALS and WMI_LRO_INFO_TCP_FLAGS_MASK
+     * macros to isolate the mask field and values field that are packed
+     * into this u32 "word".
+     */
+    A_UINT32 tcp_flag_u32;
+    /**
+     * @brief toeplitz_hash_ipv4 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains
+     * bytes 0 to 3
+     *
+     * In this and all the below toeplitz_hash fields, the bytes are
+     * specified in little-endian order.  For example:
+     *     toeplitz_hash_ipv4_0_3 bits 7:0   holds seed byte 0
+     *     toeplitz_hash_ipv4_0_3 bits 15:8  holds seed byte 1
+     *     toeplitz_hash_ipv4_0_3 bits 23:16 holds seed byte 2
+     *     toeplitz_hash_ipv4_0_3 bits 31:24 holds seed byte 3
+     */
+    A_UINT32 toeplitz_hash_ipv4_0_3;
+
+    /**
+     * @brief toeplitz_hash_ipv4 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains
+     * bytes 4 to 7
+     */
+    A_UINT32 toeplitz_hash_ipv4_4_7;
+
+    /**
+     * @brief toeplitz_hash_ipv4 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains
+     * bytes 8 to 11
+     */
+    A_UINT32 toeplitz_hash_ipv4_8_11;
+
+    /**
+     * @brief toeplitz_hash_ipv4 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains
+     * bytes 12 to 15
+     */
+    A_UINT32 toeplitz_hash_ipv4_12_15;
+
+    /**
+     * @brief toeplitz_hash_ipv4 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains
+     * byte 16
+     */
+    A_UINT32 toeplitz_hash_ipv4_16;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 0 to 3
+     */
+    A_UINT32 toeplitz_hash_ipv6_0_3;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 4 to 7
+     */
+    A_UINT32 toeplitz_hash_ipv6_4_7;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 8 to 11
+     */
+    A_UINT32 toeplitz_hash_ipv6_8_11;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 12 to 15
+     */
+    A_UINT32 toeplitz_hash_ipv6_12_15;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 16 to 19
+     */
+    A_UINT32 toeplitz_hash_ipv6_16_19;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 20 to 22
+     */
+    A_UINT32 toeplitz_hash_ipv6_20_23;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 24 to 27
+     */
+    A_UINT32 toeplitz_hash_ipv6_24_27;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 28 to 31
+     */
+    A_UINT32 toeplitz_hash_ipv6_28_31;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 32 to 35
+     */
+    A_UINT32 toeplitz_hash_ipv6_32_35;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * bytes 36 to 39
+     */
+    A_UINT32 toeplitz_hash_ipv6_36_39;
+
+    /**
+     * @brief toeplitz_hash_ipv6 - contains seed needed to compute
+     * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains
+     * byte 40
+     */
+    A_UINT32 toeplitz_hash_ipv6_40;
+} wmi_lro_info_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_cmd_fixed_param  */
+    A_UINT32 offset; /* flash offset to write, starting from 0 */
+    A_UINT32 length; /* vaild data length in buffer, unit: byte */
+} wmi_transfer_data_to_flash_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_complete_event_fixed_param */
+    /** Return status. 0 for success, non-zero otherwise */
+    A_UINT32 status;
+} wmi_transfer_data_to_flash_complete_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_read_data_from_flash_cmd_fixed_param  */
+    A_UINT32 offset; /* flash offset to read, starting from 0 */
+    A_UINT32 length; /* data length to read, unit: byte */
+} wmi_read_data_from_flash_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_read_data_from_flash_event_fixed_param */
+    A_UINT32 status; /* Return status. 0 for success, non-zero otherwise */
+    A_UINT32 offset; /* flash offset reading from, starting from 0 */
+    A_UINT32 length; /* length of data being reported, unit: byte */
+} wmi_read_data_from_flash_event_fixed_param;
+
+typedef enum {
+    ENHANCED_MCAST_FILTER_DISABLED,
+    ENHANCED_MCAST_FILTER_ENABLED
+} ENHANCED_MCAST_FILTER_CONFIG;
+
+/*
+ * Command to enable/disable filtering of multicast IP with unicast mac
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_config_enhanced_mcast_filter_fixed_param */
+    /* Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /* 1 = enable 0 = disable (see ENHANCED_MCAST_FILTER_CONFIG) */
+    A_UINT32 enable;
+} wmi_config_enhanced_mcast_filter_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_wisa_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id;
+    /** WISA enable / disable mode */
+    A_UINT32 wisa_mode;
+} wmi_vdev_wisa_cmd_fixed_param;
+
+/*
+ * This structure is used to report SMPS force mode set complete to host.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_complete_event_fixed_param */
+    /* Unique id identifying the VDEV */
+    A_UINT32 vdev_id;
+    /* Return status. 0 for success, non-zero otherwise */
+    A_UINT32 status;
+} wmi_sta_smps_force_mode_complete_event_fixed_param;
+
+/*
+ * This structure is used to report SCPC calibrated data to host.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scpc_event_fixed_param */
+    /** number of BDF patches. Each patch contains offset, length and data */
+    A_UINT32 num_patch;
+/*  This TLV is followed by another TLV of array of bytes
+ *  A_UINT8 data[];
+ *  This data array contains, for example
+ *  patch1 offset(byte3~0),   patch1 data length(byte7~4),   patch1 data(byte11~8)
+ *  patch2 offset(byte15~12), patch2 data length(byte19~16), patch2 data(byte47~20)
+ *
+ */
+} wmi_scpc_event_fixed_param;
+
+/* bpf interface structure */
+typedef struct wmi_bpf_get_capability_cmd_s {
+    A_UINT32 tlv_header;
+    A_UINT32 reserved;  /* reserved for future use - must be filled with 0x0 */
+} wmi_bpf_get_capability_cmd_fixed_param;
+
+typedef struct wmi_bpf_capability_info_evt_s {
+    A_UINT32 tlv_header;
+    A_UINT32 bpf_version; /* fw's implement version */
+    A_UINT32 max_bpf_filters; /* max filters that fw supports */
+    A_UINT32 max_bytes_for_bpf_inst; /* the maximum bytes that can be used as bpf instructions */
+} wmi_bpf_capability_info_evt_fixed_param;
+
+/* bit 0 of flags: report counters */
+#define WMI_BPF_GET_VDEV_STATS_FLAG_CTR_S  0
+#define WMI_BPF_GET_VDEV_STATS_FLAG_CTR_M  0x1
+typedef struct wmi_bpf_get_vdev_stats_cmd_s {
+    A_UINT32 tlv_header;
+    A_UINT32 flags;
+    A_UINT32 vdev_id;
+} wmi_bpf_get_vdev_stats_cmd_fixed_param;
+
+typedef struct wmi_bpf_vdev_stats_info_evt_s {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 num_filters;
+    A_UINT32 num_checked_pkts;
+    A_UINT32 num_dropped_pkts;
+} wmi_bpf_vdev_stats_info_evt_fixed_param;
+
+typedef struct wmi_bpf_set_vdev_instructions_cmd_s {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 filter_id;
+    A_UINT32 bpf_version;  /* host bpf version */
+    A_UINT32 total_length;
+    A_UINT32 current_offset;
+    A_UINT32 current_length;
+/*
+ * The TLV follows:
+ *    A_UINT8  buf_inst[]; <-- Variable length buffer for the instuctions
+ */
+} wmi_bpf_set_vdev_instructions_cmd_fixed_param;
+
+#define BPF_FILTER_ID_ALL  0xFFFFFFFF
+typedef struct wmi_bpf_del_vdev_instructions_cmd_s {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 filter_id;  /* BPF_FILTER_ID_ALL means delete all */
+} wmi_bpf_del_vdev_instructions_cmd_fixed_param;
+
+#define AES_BLOCK_LEN           16  /* in bytes */
+#define FIPS_KEY_LENGTH_128     16  /* in bytes */
+#define FIPS_KEY_LENGTH_256     32  /* in bytes */
+#define FIPS_ENCRYPT_CMD        0
+#define FIPS_DECRYPT_CMD        1
+#define FIPS_ENGINE_AES_CTR     0
+#define FIPS_ENGINE_AES_MIC     1
+#define FIPS_ERROR_OPER_TIMEOUT 1
+
+/* WMI_PDEV_FIPS_CMDID */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_fips_cmd_fixed_param */
+
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+
+    A_UINT32 fips_cmd;            /* FIPS_ENCRYPT or FIPS_DECRYPT */
+    A_UINT32 mode;                /* FIPS_ENGINE_AES_CTR or FIPS_ENGINE_AES_MIC */
+    A_UINT32 key_len;             /* FIPS_KEY_LENGTH_128 or FIPS_KEY_LENGTH_256 (units = bytes) */
+    A_UINT8 key[WMI_MAX_KEY_LEN]; /* Key */
+    A_UINT32 data_len;            /* data length */
+/*
+ * Following this structure is the TLV:
+ * A_UINT32 data[1]; <-- In Data (keep this in the end)
+ */
+} wmi_pdev_fips_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_smart_ant_enable_cmd_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    A_UINT32 enable;              /* 1:enable, 0:disable */
+    A_UINT32 mode;                /* 1:GPIO parallel mode, 0:GPIO serial mode */
+    A_UINT32 rx_antenna;          /* rx antenna */
+    A_UINT32 tx_default_antenna;  /* tx default antenna */
+   /*
+    * Following this structure is the TLV:
+    * wmi_pdev_smart_ant_gpio_handle
+    */
+} wmi_pdev_smart_ant_enable_cmd_fixed_param;
+
+/** GPIO pins/function values to control antennas */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_smart_ant_gpio_handle */
+    A_UINT32 gpio_pin;   /* For serial: index 0-strobe index 1-data, For Parallel: per stream */
+    A_UINT32 gpio_func;  /* GPIO function values for Smart Antenna */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_smart_ant_gpio_handle;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_smart_ant_set_rx_antenna_cmd_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    A_UINT32 rx_antenna;
+} wmi_pdev_smart_ant_set_rx_antenna_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_tx_antenna_cmd_fixed_param */
+    /** unique id identifying the vdev, generated by the caller */
+    A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+   /*
+    * Following this structure is the TLV:
+    * wmi_peer_smart_ant_set_tx_antenna_series
+    */
+} wmi_peer_smart_ant_set_tx_antenna_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_tx_antenna_series */
+    /* antenna array */
+    A_UINT32 antenna_series;
+} wmi_peer_smart_ant_set_tx_antenna_series;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_train_antenna_param */
+    /* rate array */
+    A_UINT32  train_rate_series;
+    /* antenna array */
+    A_UINT32 train_antenna_series;
+    /* Rate flags */
+    /* TODO: For future use? */
+    A_UINT32 rc_flags;
+} wmi_peer_smart_ant_set_train_antenna_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_train_antenna_cmd_fixed_param */
+    /** unique id identifying the VDEV, generated by the caller */
+    A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /* num packets; 0-stop training */
+    A_UINT32 num_pkts;
+   /*
+    * Following this structure is the TLV:
+    * wmi_peer_smart_ant_set_train_antenna_param
+    */
+} wmi_peer_smart_ant_set_train_antenna_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_node_config_ops_cmd_fixed_param */
+    /** unique id identifying the vdev, generated by the caller */
+    A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */
+    /** peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    /* command id*/
+    A_UINT32 cmd_id;
+    /* number of arguments passed */
+    A_UINT32 args_count;
+/*
+ * Following this structure is the TLV:
+ * A_UINT32 args[]; <-- argument list
+ */
+} wmi_peer_smart_ant_set_node_config_ops_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_ant_ctrl_chain */
+    A_UINT32 antCtrlChain;
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_set_ant_ctrl_chain;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_ant_switch_tbl_cmd_fixed_param */
+    A_UINT32 mac_id;     /* MAC ID */
+    A_UINT32 antCtrlCommon1;
+    A_UINT32 antCtrlCommon2;
+   /*
+    * Following this structure is the TLV:
+    * wmi_pdev_set_ant_ctrl_chain
+    */
+} wmi_pdev_set_ant_switch_tbl_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_ctl_table_cmd_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    /** len of CTL info */
+    A_UINT32 ctl_len;
+    /* ctl array (len adjusted to  number of words).
+     * Following this structure is the TLV:
+     * A_UINT32 ctl_info[1];
+     */
+} wmi_pdev_set_ctl_table_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_mimogain_table_cmd_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    A_UINT32 mimogain_info; /* see WMI_MIMOGAIN macros */
+    /*
+     * Bit 7:0 len of array gain table
+     * Bit 8   bypass multi chain gain or not
+     */
+    /* array gain table(s) (len adjusted to number of words).
+     * Following this structure is the TLV:
+     * A_UINT32 arraygain_tbl[1];
+     */
+} wmi_pdev_set_mimogain_table_cmd_fixed_param;
+
+#define WMI_MIMOGAIN_ARRAY_GAIN_LEN_S 0
+#define WMI_MIMOGAIN_ARRAY_GAIN_LEN (0xff << WMI_MIMOGAIN_ARRAY_GAIN_LEN_S)
+#define WMI_MIMOGAIN_ARRAY_GAIN_LEN_GET(x) WMI_F_MS(x,WMI_MIMOGAIN_ARRAY_GAIN_LEN)
+#define WMI_MIMOGAIN_ARRAY_GAIN_LEN_SET(x,z) WMI_F_RMW(x,z,WMI_MIMOGAIN_ARRAY_GAIN_LEN)
+
+#define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_S 8
+#define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS (0x1 << WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_S)
+#define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_GET(x) WMI_F_MS(x,WMI_MIMOGAIN_MULTI_CHAIN_BYPASS)
+#define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_SET(x,z) WMI_F_RMW(x,z,WMI_MIMOGAIN_MULTI_CHAIN_BYPASS)
+
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_fwtest_set_param_cmd_fixed_param */
+    /** parameter id   */
+    A_UINT32 param_id;
+    /** parameter value */
+    A_UINT32 param_value;
+} wmi_fwtest_set_param_cmd_fixed_param;
+
+#define WMI_ATF_DENOMINATION   1000 /* Expressed in 1 part in 1000 (permille) */
+
+#define WMI_ATF_SSID_FAIR_SCHED     0   /** fair ATF scheduling for vdev */
+#define WMI_ATF_SSID_STRICT_SCHED   1   /** strict ATF scheduling for vdev */
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_atf_peer_info */
+    A_UINT32 tlv_header;
+    wmi_mac_addr peer_macaddr;
+    A_UINT32 atf_units; /* Based on 1 part in 1000 (per mille) */
+    A_UINT32 atf_groupid; /* Group Id of the peers for ATF SSID grouping */
+    A_UINT32 atf_units_reserved; /* Peer congestion threshold for future use */
+} wmi_atf_peer_info;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_atf_request_fixed_param */
+    A_UINT32 num_peers;
+    /*
+     * Following this structure is the TLV:
+     * struct wmi_atf_peer_info peer_info[num_peers];
+     */
+} wmi_peer_atf_request_fixed_param;
+
+/* Structure for Bandwidth Fairness peer information */
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bwf_peer_info */
+    A_UINT32 tlv_header;
+    wmi_mac_addr peer_macaddr;
+    A_UINT32 bwf_guaranteed_bandwidth; /* BWF guaranteed_bandwidth for the peers in mbps */
+    A_UINT32 bwf_max_airtime; /* BWF Maximum airtime percentage that can be allocated to the peer to meet the guaranteed_bandwidth */
+    A_UINT32 bwf_peer_priority; /* BWF priority of the peer to allocate the tokens dynamically */
+} wmi_bwf_peer_info;
+
+/* Structure for Bandwidth Fairness peer request */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_bwf_request_fixed_param */
+    A_UINT32 num_peers;
+    /*
+     * Following this structure is the TLV:
+     * struct wmi_bwf_peer_info peer_info[num_peers];
+     */
+} wmi_peer_bwf_request_fixed_param;
+
+/* Equal distribution of ATF air time within an VDEV. */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_atf_request_fixed_param */
+    A_UINT32 vdev_id;
+    A_UINT32 peer_atf_units; /* Per peer ATF units (per mille). */
+} wmi_vdev_atf_request_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_ani_cck_config_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    /** parameter   */
+    A_UINT32 param;
+} wmi_pdev_get_ani_cck_config_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_ani_ofdm_config_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    /** parameter   */
+    A_UINT32 param;
+} wmi_pdev_get_ani_ofdm_config_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_QBOOST_CFG_CMD_fixed_param */
+    A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */
+    A_UINT32 qb_enable;
+    wmi_mac_addr peer_macaddr;
+} WMI_QBOOST_CFG_CMD_fixed_param;
+
+#define WMI_INST_STATS_INVALID_RSSI 0
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_inst_rssi_stats_resp_fixed_param */
+    A_UINT32 iRSSI; /* dBm above the noise floor */
+    /* peer MAC address */
+    wmi_mac_addr peer_macaddr;
+    A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */
+} wmi_inst_rssi_stats_resp_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_cck_ofdm_rate_info */
+    A_UINT32 ratecode_legacy; /* Rate code for CCK OFDM */
+} wmi_peer_cck_ofdm_rate_info;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_mcs_rate_info */
+    A_UINT32 ratecode_20; /* Rate code for 20MHz BW */
+    A_UINT32 ratecode_40; /* Rate code for 40MHz BW */
+    A_UINT32 ratecode_80; /* Rate code for 80MHz BW */
+} wmi_peer_mcs_rate_info;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_ratecode_list_event_fixed_param */
+    wmi_mac_addr peer_macaddr;
+    A_UINT32 ratecount; /* Max Rate count for each mode */
+    A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */
+    /*
+     * Following this structure are the TLV:
+     * struct wmi_peer_cck_ofdm_rate_info;
+     * struct wmi_peer_mcs_rate_info;
+     */
+} wmi_peer_ratecode_list_event_fixed_param;
+
+typedef struct wmi_wds_addr_event {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wds_addr_event_fixed_param */
+    A_UINT32 event_type[4];
+    wmi_mac_addr peer_mac;
+    wmi_mac_addr dest_mac;
+    A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */
+} wmi_wds_addr_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_sta_ps_statechange_event_fixed_param */
+    wmi_mac_addr peer_macaddr;
+    A_UINT32 peer_ps_state;
+} wmi_peer_sta_ps_statechange_event_fixed_param;
+
+/* WMI_PDEV_FIPS_EVENTID */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_fips_event_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    A_UINT32 error_status; /* Error status: 0 (no err), 1, or OPER_TIMEOUT */
+    A_UINT32 data_len;     /* Data length */
+/*
+ * Following this structure is the TLV:
+ *    A_UINT32 data[1]; <-- Out Data (keep this in the end)
+ */
+} wmi_pdev_fips_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_channel_hopping_event_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    /* Noise threshold iterations with high values */
+    A_UINT32 noise_floor_report_iter;
+    /* Total noise threshold iterations */
+    A_UINT32 noise_floor_total_iter;
+} wmi_pdev_channel_hopping_event_fixed_param;
+
+enum {
+    WMI_PDEV_RESERVE_AST_ENTRY_OK,
+    WMI_PDEV_RESERVE_AST_ENTRY_HASH_COLLISION,
+    WMI_PDEV_RESERVE_AST_ENTRY_CROSSING_AXI_BOUNDARY,
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_tpc_cmd_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    A_UINT32 rate_flags;
+    /**
+    * FLAG_ONE_CHAIN     0x001  - one chain mask
+    * FLAG_TWO_CHAIN     0x005  - two chain mask
+    * FLAG_THREE_CHAIN   0x007  - three chain mask
+    * FLAG_FOUR_CHAIN    0x00F  - four chain mask
+    * FLAG_STBC          0x010  - STBC is set
+    * FLAG_40MHZ         0x020
+    * FLAG_80MHZ         0x040
+    * FLAG_160MHZ        0x080
+    * FLAG_TXBF          0x0100 - Tx Bf enabled
+    * FLAG_RTSENA        0x0200 - RTS enabled
+    * FLAG_CTSENA        0x0400 - CTS enabled
+    * FLAG_LDPC          0x0800 - LDPC set
+    * FLAG_SERIES1       0x1000 -
+    * FLAG_SGI           0x2000 - Short gaurd interval
+    * FLAG_MU2           0x4000 - MU2 data
+    * FLAG_MU3           0x8000 - MU3 data
+    * */
+    A_UINT32 nss;
+    /**
+    * NSS 0x0 - 0x3
+    * */
+    A_UINT32 preamble;
+    /**
+    * PREAM_OFDM - 0x0
+    * PREAM_CCK  - 0x1
+    * PREAM_HT   - 0x2
+    * PREAM_VHT  - 0x3
+    * */
+    A_UINT32 hw_rate;
+    /**
+     * *** HW_OFDM_RATE ***
+     * OFDM_48_MBPS - 0x0
+     * OFDM_24_MBPS - 0x1
+     * OFDM_12_MBPS - 0x2
+     * OFDM_6_MBPS  - 0x3
+     * OFDM_54_MBPS - 0x4
+     * OFDM_36_MBPS - 0x5
+     * OFDM_18_MBPS - 0x6
+     * OFDM_9_MBPS  - 0x7
+     *
+     * *** HW_CCK_RATE ***
+     * CCK_11_LONG_MBPS   - 0x0
+     * CCK_5_5_LONG_MBPS  - 0x1
+     * CCK_2_LONG_MBPS    - 0x2
+     * CCK_1_LONG_MBPS    - 0x3
+     * CCK_11_SHORT_MBPS  - 0x4
+     * CCK_5_5_SHORT_MBPS - 0x5
+     * CCK_2_SHORT_MBPS   - 0x6
+     *
+     * *** HW_HT / VHT_RATE ***
+     * MCS 0x0 - 0x9
+     * */
+} wmi_pdev_get_tpc_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_chip_power_stats_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+} wmi_pdev_get_chip_power_stats_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_tpc_event_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+   /*
+    * Following this structure is the TLV:
+    *    A_UINT32 tpc[1];
+    */
+} wmi_pdev_tpc_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_event_fixed_param */
+    union {
+        A_UINT32 mac_id; /* OBSOLETE - will be removed once all refs are gone */
+        /** pdev_id for identifying the MAC
+         * See macros starting with WMI_PDEV_ID_ for values.
+         */
+        A_UINT32 pdev_id;
+    };
+    A_UINT32 nfdBr_len;
+    A_UINT32 nfdBm_len;
+    A_UINT32 freqNum_len;
+   /*
+    * Following this structure is the TLV:
+    * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBr;
+    * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBm;
+    * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_freqNum;
+    */
+} wmi_pdev_nfcal_power_all_channels_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBr */
+    A_UINT32 nfdBr;
+} wmi_pdev_nfcal_power_all_channels_nfdBr;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBm */
+    A_UINT32 nfdBm;
+} wmi_pdev_nfcal_power_all_channels_nfdBm;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_freqNum */
+    A_UINT32 freqNum;
+} wmi_pdev_nfcal_power_all_channels_freqNum;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ani_cck_event_fixed_param */
+    A_UINT32 cck_level;
+} wmi_ani_cck_event_fixed_param;
+
+typedef enum wmi_power_debug_reg_fmt_type {
+    /* WMI_POWER_DEBUG_REG_FMT_TYPE_ROME -> Dumps following 12 Registers
+     *     SOC_SYSTEM_SLEEP 
+     *     WLAN_SYSTEM_SLEEP
+     *     RTC_SYNC_FORCE_WAKE
+     *     MAC_DMA_ISR
+     *     MAC_DMA_TXRX_ISR
+     *     MAC_DMA_ISR_S1
+     *     MAC_DMA_ISR_S2
+     *     MAC_DMA_ISR_S3
+     *     MAC_DMA_ISR_S4
+     *     MAC_DMA_ISR_S5
+     *     MAC_DMA_ISR_S6
+     *     MAC_DMA_ISR_S7
+     */
+    WMI_POWER_DEBUG_REG_FMT_TYPE_ROME,
+
+    WMI_POWER_DEBUG_REG_FMT_TYPE_MAX = 0xf,
+} WMI_POWER_DEBUG_REG_FMT_TYPE;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chip_power_stats_event_fixed_param */
+    A_UINT32 cumulative_sleep_time_ms; /* maximum range is 35 hours, due to conversion from internal 0.03215 ms units to ms */
+    A_UINT32 cumulative_total_on_time_ms; /* maximum range is 35 hours, due to conversion from internal 0.03215 ms units to ms */
+    A_UINT32 deep_sleep_enter_counter; /* count of number of times chip enterred deep sleep */
+    A_UINT32 last_deep_sleep_enter_tstamp_ms; /* Last Timestamp when Chip went to deep sleep */
+    A_UINT32 debug_register_fmt; /* WMI_POWER_DEBUG_REG_FMT_TYPE enum, describes debug registers being dumped as part of the event */
+    A_UINT32 num_debug_register; /* number of debug registers being sent to host */
+    /*
+     * Following this structure is the TLV:
+     *    A_UINT32 debug_registers[num_debug_registers];
+     */
+} wmi_pdev_chip_power_stats_event_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ani_ofdm_event_fixed_param */
+    A_UINT32 ofdm_level;
+} wmi_ani_ofdm_event_fixed_param;
+
+typedef enum wmi_coex_config_type {
+    WMI_COEX_CONFIG_PAGE_P2P_TDM = 1, /* config interval (arg1 BT, arg2 WLAN) for P2P + PAGE */
+    WMI_COEX_CONFIG_PAGE_STA_TDM = 2, /* config interval (arg1 BT, arg2 WLAN) for STA + PAGE */
+    WMI_COEX_CONFIG_PAGE_SAP_TDM = 3, /* config interval (arg1 BT, arg2 WLAN) for SAP + PAGE */
+    WMI_COEX_CONFIG_DURING_WLAN_CONN = 4, /* config during WLAN connection */
+    WMI_COEX_CONFIG_BTC_ENABLE = 5, /* config to enable/disable BTC */
+} WMI_COEX_CONFIG_TYPE;
+
+typedef struct {
+    A_UINT32 tlv_header;
+    A_UINT32 vdev_id;
+    A_UINT32 config_type; /* wmi_coex_config_type enum */
+    A_UINT32 config_arg1;
+    A_UINT32 config_arg2;
+} WMI_COEX_CONFIG_CMD_fixed_param;
+
+/**
+ * This command is sent from WLAN host driver to firmware to
+ * request firmware to enable/disable channel avoidance report
+ * to host.
+ *
+ */
+enum {
+    WMI_MWSCOEX_CHAN_AVD_RPT_DISALLOW = 0,
+    WMI_MWSCOEX_CHAN_AVD_RPT_ALLOW = 1
+};
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param */
+    /** Allow/disallow flag - see WMI_MWSCOEX_CHAN_AVD_RPT enum */
+    A_UINT32 rpt_allow;
+} WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param;
+
+/*
+ * Periodic channel stats WMI command structure
+ * WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_set_periodic_channel_stats_config_fixed_param */
+    /** 1 = enable, 0 = disable */
+    A_UINT32 enable;
+    /** periodic stats duration (units are milliseconds) */
+    A_UINT32 stats_period;
+} wmi_set_periodic_channel_stats_config_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_wal_power_debug_cmd_fixed_param */
+    /** pdev_id for identifying the MAC
+     * See macros starting with WMI_PDEV_ID_ for values.
+     */
+    A_UINT32 pdev_id;
+    /* Identify the wlan module */
+    A_UINT32 module_id;
+    /* Num of elements in the following args[] array */
+    A_UINT32 num_args;
+/**
+ * Following this structure are the TLVs:
+ *   A_UINT32 args[];
+ **/
+} wmi_pdev_wal_power_debug_cmd_fixed_param;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_reorder_timeout_val_cmd_fixed_param */
+    /**
+     * @brief rx_timeout_pri - what rx reorder timeout (ms) to use for the AC
+     * @details
+     *     Each WMM access category (voice, video, best-effort, background)
+     *     will have its own timeout value to dictate how long to wait for
+     *     missing rx MPDUs to arrive before releasing subsequent MPDUs that
+     *     have already been received.
+     *     This parameter specifies the timeout in milliseconds for each
+     *     access category.
+     *     The array elements are indexed by the WMI_AC enum to identify
+     *     which array element corresponds to which AC / traffic type.
+     */
+    A_UINT32 rx_timeout_pri[WMI_AC_MAX];
+} wmi_pdev_set_reorder_timeout_val_cmd_fixed_param;
+
+/**
+ * wlan stats shall be understood as per period.
+ * Generally, it is reported periodically based on the period specified by host.
+ * But if the variation of one stats of compared to the
+ * pervious notification exceeds a threshold,
+ * FW will report the wlan stats immediately.
+ * The values of the stats becomes the new reference to compute variations.
+ * This threshold can be a global setting or per category.
+ * Host can enable/disable the mechanism for any stats per bitmap.
+ * TX/RX thresholds (percentage value) are shared across ACs,
+ * and TX/RX stats comprisons are processed per AC of each peer.
+ * For example, if bit 0 (stand for tx_mpdus) of tx_thresh_bitmap is set to 1,
+ * and the detailed tx_mpdus threshold value is set to 10%,
+ * suppose tx_mpdus value of BE of peer 0 is 100 in first period,
+ * and it reaches 110 during the second period,
+ * FW will generate and send out a wlan stats event immediately.
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_stats_threshold_cmd_fixed_param */
+    /** Indicate if threshold mechnism is enabled or disabled.
+     *  It is disabled by default.
+     *  Host can enable and disable it dynamically.
+     */
+    A_UINT32 enable_thresh;
+    /** use_thresh_bitmap equals 0 means gbl_thresh is used.
+     *  when use_thresh_bitmap equals 1, ignore gbl_thresh and use stats bitmap indicated thresholds.
+     */
+    A_UINT32 use_thresh_bitmap;
+    /** global threshold, valid when use_thresh_bitmap equals 0.
+     *  It takes effect for all counters.
+     *  If use_thresh_bitmap ==0 && gbl_thresh == 0, disable threshold mechanism.
+     */
+    A_UINT32 gbl_thresh;
+    /** Enable/disable bitmap for threshold mechanism of CCA stats */
+    A_UINT32 cca_thresh_bitmap;
+    /** Enable/disable bitmap for threshold mechanism of signal stats */
+    A_UINT32 signal_thresh_bitmap;
+    /** Enable/disable bitmap for threshold mechanism of TX stats */
+    A_UINT32 tx_thresh_bitmap;
+    /** Enable/disable bitmap for threshold mechanism of RX stats */
+    A_UINT32 rx_thresh_bitmap;
+    /* This TLV is followed by TLVs below:
+     *    wmi_chan_cca_stats_thresh     cca_thresh;
+     *    wmi_peer_signal_stats_thresh  signal_thresh;
+     *    wmi_tx_stats_thresh           tx_thresh;    
+     *    wmi_rx_stats_thresh           rx_thresh;
+     */
+} wmi_pdev_set_stats_threshold_cmd_fixed_param;
+
+typedef enum {
+    WMI_REQUEST_WLAN_TX_STAT     = 0x01,
+    WMI_REQUEST_WLAN_RX_STAT     = 0x02,
+    WMI_REQUEST_WLAN_CCA_STAT    = 0x04,
+    WMI_REQUEST_WLAN_SIGNAL_STAT = 0x08,
+} wmi_wlan_stats_id;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_request_wlan_stats_cmd_fixed_param */
+    wmi_wlan_stats_id stats_id;
+} wmi_request_wlan_stats_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_rmc_set_leader_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /* Leader's mac address */
+    wmi_mac_addr leader_mac_addr;
+} wmi_rmc_set_leader_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+    * WMITLV_TAG_STRUC_wmi_rmc_manual_leader_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /*  0: success
+     *  1: selected leader not found in network, able to find using auto selection
+     * -1: error
+     * non zero value should be return to userspace in case of failure */
+    A_INT32 status;
+    /* bssid of new leader */
+    wmi_mac_addr leader_mac_addr;
+} wmi_rmc_manual_leader_event_fixed_param;
+
+typedef enum {
+    WLAN_2G_CAPABILITY = 0x1,
+    WLAN_5G_CAPABILITY = 0x2,
+} WLAN_BAND_CAPABILITY;
+
+typedef enum wmi_hw_mode_config_type {
+    WMI_HW_MODE_SINGLE      = 0, /* Only one PHY is active. */
+    WMI_HW_MODE_DBS         = 1, /* Both PHYs are active in different bands, one in 2G and another in 5G. */
+    WMI_HW_MODE_SBS_PASSIVE = 2, /* Both PHYs are in passive mode (only rx) in same band; no tx allowed. */
+    WMI_HW_MODE_SBS         = 3, /* Both PHYs are active in the same band.
+                                  * Support for both PHYs within one band is planned for 5G only
+                                  * (as indicated in WMI_MAC_PHY_CAPABILITIES),
+                                  * but could be extended to other bands in the future.
+                                  * The separation of the band between the two PHYs needs to be communicated separately.
+                                  */
+    WMI_HW_MODE_DBS_SBS     = 4, /* 3 PHYs, with 2 on the same band doing SBS
+                                  * as in WMI_HW_MODE_SBS, and 3rd on the other band
+                                  */
+} WMI_HW_MODE_CONFIG_TYPE;
+
+#define WMI_SUPPORT_11B_GET(flags) WMI_GET_BITS(flags, 0, 1)
+#define WMI_SUPPORT_11B_SET(flags, value) WMI_SET_BITS(flags, 0, 1, value)
+
+#define WMI_SUPPORT_11G_GET(flags) WMI_GET_BITS(flags, 1, 1)
+#define WMI_SUPPORT_11G_SET(flags, value) WMI_SET_BITS(flags, 1, 1, value)
+
+#define WMI_SUPPORT_11A_GET(flags) WMI_GET_BITS(flags, 2, 1)
+#define WMI_SUPPORT_11A_SET(flags, value) WMI_SET_BITS(flags, 2, 1, value)
+
+#define WMI_SUPPORT_11N_GET(flags) WMI_GET_BITS(flags, 3, 1)
+#define WMI_SUPPORT_11N_SET(flags, value) WMI_SET_BITS(flags, 3, 1, value)
+
+#define WMI_SUPPORT_11AC_GET(flags) WMI_GET_BITS(flags, 4, 1)
+#define WMI_SUPPORT_11AC_SET(flags, value) WMI_SET_BITS(flags, 4, 1, value)
+
+#define WMI_SUPPORT_11AX_GET(flags) WMI_GET_BITS(flags, 5, 1)
+#define WMI_SUPPORT_11AX_SET(flags, value) WMI_SET_BITS(flags, 5, 1, value)
+
+#define WMI_MAX_MUBFEE_GET(flags) WMI_GET_BITS(flags, 28, 4)
+#define WMI_MAX_MUBFEE_SET(flags, value) WMI_SET_BITS(flags, 28, 4, value)
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_MAC_PHY_CAPABILITIES */
+    /* hw_mode_id - identify a particular set of HW characteristics, as specified
+     * by the subsequent fields. WMI_MAC_PHY_CAPABILITIES element must be mapped
+     * to its parent WMI_HW_MODE_CAPABILITIES element using hw_mode_id.
+     * No particular ordering of WMI_MAC_PHY_CAPABILITIES elements should be assumed,
+     * though in practice the elements may always be ordered by hw_mode_id */
+    A_UINT32 hw_mode_id;
+    /* pdev_id starts with 1. pdev_id 1 => phy_id 0, pdev_id 2 => phy_id 1 */
+    A_UINT32 pdev_id;
+    /* phy id. Starts with 0 */
+    A_UINT32 phy_id;
+    /* supported modulations and number of MU beamformees */
+    union {
+        struct {
+            A_UINT32 supports_11b:1,
+                     supports_11g:1,
+                     supports_11a:1,
+                     supports_11n:1,
+                     supports_11ac:1,
+                     supports_11ax:1,
+
+                     unused: 22,
+
+                     max_mubfee: 4; /* max MU beamformees supported per MAC */
+        };
+        A_UINT32 supported_flags;
+    };
+    /* supported bands, enum WLAN_BAND_CAPABILITY */
+    A_UINT32 supported_bands;
+    /* ampdu density 0 for no restriction, 1 for 1/4 us, 2 for 1/2 us,
+     * 3 for 1 us,4 for 2 us, 5 for 4 us, 6 for 8 us,7 for 16 us */
+    A_UINT32 ampdu_density;
+    /* max bw supported 2G, enum wmi_channel_width */
+    A_UINT32 max_bw_supported_2G;
+    /* WMI HT Capability, WMI_HT_CAP defines */
+    A_UINT32 ht_cap_info_2G;
+    /* VHT capability info field of 802.11ac, WMI_VHT_CAP defines */
+    A_UINT32 vht_cap_info_2G;
+    /* VHT Supported MCS Set field Rx/Tx same
+     * The max VHT-MCS for n SS subfield (where n = 1,...,8) is encoded as follows
+     * - 0 indicates support for VHT-MCS 0-7 for n spatial streams
+     * - 1 indicates support for VHT-MCS 0-8 for n spatial streams
+     * - 2 indicates support for VHT-MCS 0-9 for n spatial streams
+     * - 3 indicates that n spatial streams is not supported */
+    A_UINT32 vht_supp_mcs_2G;
+    /*HE capability info field of 802.11ax, WMI_HE_CAP defines */
+    A_UINT32 he_cap_info_2G;
+    /* HE Supported MCS Set field Rx/Tx same */
+    A_UINT32 he_supp_mcs_2G;
+    /* Valid Transmit chain mask */
+    A_UINT32 tx_chain_mask_2G;
+    /* Valid Receive chain mask */
+    A_UINT32 rx_chain_mask_2G;
+    /* max bw supported 5G, enum wmi_channel_width */
+    A_UINT32 max_bw_supported_5G;
+    /* WMI HT Capability, WMI_HT_CAP defines */
+    A_UINT32 ht_cap_info_5G;
+    /* VHT capability info field of 802.11ac, WMI_VHT_CAP defines */
+    A_UINT32 vht_cap_info_5G;
+    /* VHT Supported MCS Set field Rx/Tx same
+    * The max VHT-MCS for n SS subfield (where n = 1,...,8) is encoded as follows
+    * - 0 indicates support for VHT-MCS 0-7 for n spatial streams
+    * - 1 indicates support for VHT-MCS 0-8 for n spatial streams
+    * - 2 indicates support for VHT-MCS 0-9 for n spatial streams
+    * - 3 indicates that n spatial streams is not supported */
+    A_UINT32 vht_supp_mcs_5G;
+    /*HE capability info field of 802.11ax, WMI_HE_CAP defines */
+    A_UINT32 he_cap_info_5G;
+    /* HE Supported MCS Set field Rx/Tx same */
+    A_UINT32 he_supp_mcs_5G;
+    /* Valid Transmit chain mask */
+    A_UINT32 tx_chain_mask_5G;
+    /* Valid Receive chain mask */
+    A_UINT32 rx_chain_mask_5G;
+} WMI_MAC_PHY_CAPABILITIES;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_HW_MODE_CAPABILITIES */
+    /* hw_mode_id - identify a particular set of HW characteristics,
+     * as specified by the subsequent fields */
+    A_UINT32 hw_mode_id;
+    /* BIT0 represents phy_id 0, BIT1 represent phy_id 1 and so on
+     * number of bits set in phy_id_map represents number of WMI_MAC_PHY_CAPABILITIES TLV's
+     * one for each active PHY for current HW mode identified by hw_mode_id. For example for
+     * DBS/SBS mode there will be 2 WMI_MAC_PHY_CAPABILITIES TLVs and for single MAC modes it
+     * will be 1 WMI_MAC_PHY_CAPABILITIES TLVs */
+    A_UINT32 phy_id_map;
+    /* hw_mode_config_type
+     * Identify a particular type of HW mode such as SBS, DBS etc.
+     * Refer to WMI_HW_MODE_CONFIG_TYPE values.
+     */
+    A_UINT32 hw_mode_config_type;
+} WMI_HW_MODE_CAPABILITIES;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_SOC_MAC_PHY_HW_MODE_CAPS */
+    /* num HW modes */
+    A_UINT32 num_hw_modes;
+    /* num_hw_modes WMI_HW_MODE_CAPABILITIES TLV's */
+} WMI_SOC_MAC_PHY_HW_MODE_CAPS;
+
+/*Below are Reg caps per PHY. Please note PHY ID starts with 0.*/
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_HAL_REG_CAPABILITIES_EXT */
+    /* phy id */
+    A_UINT32 phy_id;
+    /* regdomain value specified in EEPROM */
+    A_UINT32 eeprom_reg_domain;
+    /* regdomain */
+    A_UINT32 eeprom_reg_domain_ext;
+    /* CAP1 capabilities bit map, see REGDMN_CAP1_ defines */
+    A_UINT32 regcap1;
+    /* REGDMN EEPROM CAP, see REGDMN_EEPROM_EEREGCAP_ defines */
+    A_UINT32 regcap2;
+    /* REGDMN MODE, see REGDMN_MODE_ enum */
+    A_UINT32 wireless_modes;
+    A_UINT32 low_2ghz_chan;
+    A_UINT32 high_2ghz_chan;
+    A_UINT32 low_5ghz_chan;
+    A_UINT32 high_5ghz_chan;
+} WMI_HAL_REG_CAPABILITIES_EXT;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_SOC_HAL_REG_CAPABILITIES */
+    A_UINT32 num_phy;
+    /* num_phy WMI_HAL_REG_CAPABILITIES_EXT TLV's */
+} WMI_SOC_HAL_REG_CAPABILITIES;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_adaptive_dwell_parameters_tlv */
+    /** global default adaptive dwell mode, used when WMI_SCAN_DWELL_MODE_DEFAULT */
+    A_UINT32 default_adaptive_dwell_mode;
+   /** the weight to calculate the average low pass filter for channel congestion. 0-100 */
+    A_UINT32 adapative_lpf_weight;
+   /** interval to monitor passive scan in msec */
+    A_UINT32 passive_monitor_interval_ms;
+   /** % of wifi activity to switch from passive to active 0-100 */
+    A_UINT32 wifi_activity_threshold_pct;
+} wmi_scan_adaptive_dwell_parameters_tlv;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_adaptive_dwell_config_fixed_param */
+    /* globally enable/disable adaptive dwell */
+    A_UINT32 enable;
+/**
+ * followed by TLV (tag length value) parameters array
+ * The TLV's are:
+ * wmi_scan_adaptive_dwell_parameters_tlv param[]; (0 or 1 elements)
+ */
+} wmi_scan_adaptive_dwell_config_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_coex_get_antenna_isolation_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* Currently there are no parameters for this message. */
+} wmi_coex_get_antenna_isolation_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     * WMITLV_TAG_STRUC_wmi_coex_report_isolation_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** Antenna isolation value in dB units, none zero value is valid while 0 means failed to do isolation measurement or corresponding chain is not active.
+     *  Currently the HW descriptor only supports 4 chains at most.
+     *  Further isolation_chainX elements can be added in the future
+     *  for additional chains, if needed.
+     */
+    A_UINT32 isolation_chain0:8, /* [7:0],   isolation value for chain 0 */
+             isolation_chain1:8, /* [15:8],  isolation value for chain 1 */
+             isolation_chain2:8, /* [23:16], isolation value for chain 2 */
+             isolation_chain3:8; /* [31:24], isolation value for chain 3 */
+} wmi_coex_report_isolation_event_fixed_param;
+
+
+/* ADD NEW DEFS HERE */
+
+
+/*****************************************************************************
+ * The following structures are deprecated. DO NOT USE THEM!
+ */
+/** Max number of channels in the schedule. */
+#define OCB_CHANNEL_MAX (5)
+
+/* NOTE: Make sure these data structures are identical to those	9235
+* defined in sirApi.h */
+
+typedef struct
+{
+    /** Arbitration Inter-Frame Spacing. Range: 2-15 */
+    A_UINT32 aifsn;
+    /** Contention Window minimum. Range: 1 - 10 */
+    A_UINT32 cwmin;
+    /** Contention Window maximum. Range: 1 - 10 */
+    A_UINT32 cwmax;
+} wmi_qos_params_t;
+
+typedef struct
+{
+    /** Channel frequency in MHz */
+    A_UINT32 chan_freq;
+    /** Channel duration in ms */
+    A_UINT32 duration;
+    /** Start guard interval in ms */
+    A_UINT32 start_guard_interval;
+    /** End guard interval in ms */
+    A_UINT32 end_guard_interval;
+    /** Transmit power in dBm, range 0 - 23 */
+    A_UINT32 tx_power;
+    /** Transmit datarate in Mbps */
+    A_UINT32 tx_rate;
+    /** QoS parameters for each AC */
+    wmi_qos_params_t qos_params[WLAN_MAX_AC];
+    /** 1 to enable RX stats for this channel, 0 otherwise */
+    A_UINT32 rx_stats;
+} wmi_ocb_channel_t;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+    * WMITLV_TAG_STRUC_wmi_ocb_set_sched_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /** Number of valid channels in the channels array */
+    A_UINT32 num_channels;
+    /** The array of channels */
+    wmi_ocb_channel_t channels[OCB_CHANNEL_MAX];
+    /** 1 to allow off-channel tx, 0 otherwise */
+    A_UINT32 off_channel_tx; /* Not supported */
+} wmi_ocb_set_sched_cmd_fixed_param;
+
+typedef struct {
+    /** Return status. 0 for success, non-zero otherwise */
+    A_UINT32 status;
+} wmi_ocb_set_sched_event_fixed_param;
+
+/*****************************************************************************
+ * END DEPRECATED
+ */
+
+/* ADD NEW DEFS ABOVE THIS DEPRECATED SECTION */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*_WMI_UNIFIED_H_*/
+
+/**@}*/

fw/wmi_version.h

@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2012-2016 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/*
+ * IMPORTANT NOTE: For all change to WMI Interface, the ABI version number _must_ be updated.
+ */
+/** Major version number is incremented when there are significant changes to WMI Interface that break compatibility. */
+#define __WMI_VER_MAJOR_    1
+/** Minor version number is incremented when there are changes
+ *  (however minor) to WMI Interface that break
+ *  compatibility. */
+#define __WMI_VER_MINOR_    0
+/** WMI revision number has to be incremented when there is a
+ *  change that may or may not break compatibility. */
+#define __WMI_REVISION_ 290
+
+/** The Version Namespace should not be normally changed. Only
+ *  host and firmware of the same WMI namespace will work
+ *  together.
+ *  For example, "QCA_ML" converts to 0x4C, 0x4D5F414351.
+ *  where 'Q'=0x51, 'C'=0x43, 'A'=0x41, '_'=0x5F. 'M'=4D, 'L'=4C
+ */
+#define __NAMESPACE_0_    0x5F414351
+#define __NAMESPACE_1_    0x00004C4D
+#define __NAMESPACE_2_    0x00000000
+#define __NAMESPACE_3_    0x00000000
+
+/* Format of the version number. */
+#define WMI_VER_MAJOR_BIT_OFFSET        24
+#define WMI_VER_MINOR_BIT_OFFSET        0
+
+#define WMI_VER_MAJOR_BIT_MASK          0xFF000000
+#define WMI_VER_MINOR_BIT_MASK          0x00FFFFFF
+
+/* Macros to extract the sw_version components.
+ */
+#define WMI_VER_GET_MAJOR(x) (((x) & WMI_VER_MAJOR_BIT_MASK)>>WMI_VER_MAJOR_BIT_OFFSET)
+#define WMI_VER_GET_MINOR(x) (((x) & WMI_VER_MINOR_BIT_MASK)>>WMI_VER_MINOR_BIT_OFFSET)
+
+#define WMI_VER_GET_VERSION_0(major, minor) ( (( major << WMI_VER_MAJOR_BIT_OFFSET ) & WMI_VER_MAJOR_BIT_MASK) + (( minor << WMI_VER_MINOR_BIT_OFFSET ) & WMI_VER_MINOR_BIT_MASK) )
+/*
+ * The version has the following format:
+ * Bits 24-31: Major version
+ * Bits 0-23: Minor version
+ * Bits 0-31:  Build number
+ * E.g. Build 1.1.7 would be represented as 0x01000001 for Major/Minor & 0x00000007 for buildnum.
+ *
+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
+ */
+/* ABI Version. Reflects the version of binary interface exposed by Target firmware. */
+#define WMI_ABI_VERSION_0  WMI_VER_GET_VERSION_0(__WMI_VER_MAJOR_, __WMI_VER_MINOR_)
+#define WMI_ABI_VERSION_1  __WMI_REVISION_
+#define WMI_ABI_VERSION_NS_0 __NAMESPACE_0_
+#define WMI_ABI_VERSION_NS_1 __NAMESPACE_1_
+#define WMI_ABI_VERSION_NS_2 __NAMESPACE_2_
+#define WMI_ABI_VERSION_NS_3 __NAMESPACE_3_
+

fw/wmix.h

@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2012, 2014 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/*
+ * This file contains extensions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI).  It includes definitions of all
+ * extended commands and events.  Extensions include useful commands
+ * that are not directly related to wireless activities.  They may
+ * be hardware-specific, and they might not be supported on all
+ * implementations.
+ *
+ * Extended WMIX commands are encapsulated in a WMI message with
+ * cmd=WMI_EXTENSION_CMD.
+ */
+
+#ifndef _WMIX_H_
+#define _WMIX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Extended WMI commands are those that are needed during wireless
+ * operation, but which are not really wireless commands.  This allows,
+ * for instance, platform-specific commands.  Extended WMI commands are
+ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
+ * Extended WMI events are similarly embedded in a WMI event message with
+ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
+ */
+typedef struct {
+    A_UINT32    commandId;
+} POSTPACK WMIX_CMD_HDR;
+
+typedef enum {
+    WMIX_DSETOPEN_REPLY_CMDID           = 0x2001,
+    WMIX_DSETDATA_REPLY_CMDID,
+    WMIX_HB_CHALLENGE_RESP_CMDID,
+    WMIX_DBGLOG_CFG_MODULE_CMDID,
+    WMIX_PROF_CFG_CMDID,                 /* 0x200a */
+    WMIX_PROF_ADDR_SET_CMDID,
+    WMIX_PROF_START_CMDID,
+    WMIX_PROF_STOP_CMDID,
+    WMIX_PROF_COUNT_GET_CMDID,
+} WMIX_COMMAND_ID;
+
+typedef enum {
+    WMIX_DSETOPENREQ_EVENTID            = 0x3001,
+    WMIX_DSETCLOSE_EVENTID,
+    WMIX_DSETDATAREQ_EVENTID,
+    WMIX_HB_CHALLENGE_RESP_EVENTID,
+    WMIX_DBGLOG_EVENTID,
+    WMIX_PROF_COUNT_EVENTID,
+    WMIX_PKTLOG_EVENTID,
+} WMIX_EVENT_ID;
+
+/*
+ * =============DataSet support=================
+ */
+
+/*
+ * WMIX_DSETOPENREQ_EVENTID
+ * DataSet Open Request Event
+ */
+typedef struct {
+    A_UINT32 dset_id;
+    A_UINT32 targ_dset_handle;  /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;     /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;    /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETOPENREQ_EVENT;
+
+/*
+ * WMIX_DSETCLOSE_EVENTID
+ * DataSet Close Event
+ */
+typedef struct {
+    A_UINT32 access_cookie;
+} POSTPACK WMIX_DSETCLOSE_EVENT;
+
+/*
+ * WMIX_DSETDATAREQ_EVENTID
+ * DataSet Data Request Event
+ */
+typedef struct {
+    A_UINT32 access_cookie;
+    A_UINT32 offset;
+    A_UINT32 length;
+    A_UINT32 targ_buf;         /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;    /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;   /* echo'ed, not used by Host, */
+} WMIX_DSETDATAREQ_EVENT;
+
+typedef struct {
+    A_UINT32              status;
+    A_UINT32              targ_dset_handle;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              access_cookie;
+    A_UINT32              size;
+    A_UINT32              version;
+}  WMIX_DSETOPEN_REPLY_CMD;
+
+typedef struct {
+    A_UINT32              status;
+    A_UINT32              targ_buf;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              length;
+    A_UINT8               buf[1];
+}  WMIX_DSETDATA_REPLY_CMD;
+
+
+/*
+ * =============Error Detection support=================
+ */
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_CMDID
+ * Heartbeat Challenge Response command
+ */
+typedef struct {
+    A_UINT32              cookie;
+    A_UINT32              source;
+}  WMIX_HB_CHALLENGE_RESP_CMD;
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_EVENTID
+ * Heartbeat Challenge Response Event
+ */
+#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
+
+/*
+ * =============Target Profiling support=================
+ */
+
+typedef struct {
+    A_UINT32 period; /* Time (in 30.5us ticks) between samples */
+    A_UINT32 nbins;
+}  WMIX_PROF_CFG_CMD;
+
+typedef struct {
+    A_UINT32 addr;
+}  WMIX_PROF_ADDR_SET_CMD;
+
+/*
+ * Target responds to Hosts's earlier WMIX_PROF_COUNT_GET_CMDID request
+ * using a WMIX_PROF_COUNT_EVENT with
+ *   addr set to the next address
+ *   count set to the corresponding count
+ */
+typedef struct {
+    A_UINT32              addr;
+    A_UINT32              count;
+}  WMIX_PROF_COUNT_EVENT;
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMIX_H_ */