samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Vork 0
Code Kwesties Pull-aanvragen Actions Packages Projecten Publicaties Wiki Activiteit

qcacld-3.0: Fix block comments in wlan_hdd_cfg.h

Bladeren bron 
A checkpatch run on the HDD component has produced numerous
warnings about improper block comments:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments should align the * on each line
WARNING: Block comments use a trailing */ on a separate line

Fix all such warnings in wlan_hdd_cfg.h.

Change-Id: Ibb9da8752c06ac9d380ca5eaaad8b007e630908a
CRs-Fixed: 1110861
This commit is contained in:
Jeff Johnson
2017-01-12 10:44:23 -08:00
gecommit door qcabuildsw
bovenliggende 78d88a82c8
commit dcd2cf920b
1 gewijzigde bestanden met toevoegingen van 22 en 17 verwijderingen
Download Patch-bestand Download Diff-bestand Expand all files Collapse all files

39
core/hdd/inc/wlan_hdd_cfg.h
Bestand weergeven

@@ -268,8 +268,8 @@ typedef enum {
#define CFG_INTERFACE_CHANGE_WAIT_DEFAULT (50)
/*
To enable, set gRoamIntraBand=1 (Roaming within band)
To disable, set gRoamIntraBand=0 (Roaming across band)
* To enable, set gRoamIntraBand=1 (Roaming within band)
* To disable, set gRoamIntraBand=0 (Roaming across band)
*/
#define CFG_ROAM_INTRA_BAND "gRoamIntraBand"
#define CFG_ROAM_INTRA_BAND_MIN (0)
@@ -889,12 +889,13 @@ typedef enum {
#define CFG_FAST_TRANSITION_ENABLED_NAME_MAX (1)
#define CFG_FAST_TRANSITION_ENABLED_NAME_DEFAULT (1) /* Enabled */
/* This parameter is used to decide whether to Roam or not.
* AP1 is the currently associated AP and AP2 is chosen for roaming.
* The Roaming will happen only if AP2 has better Signal Quality and it has a RSSI better than AP1
* in terms of RoamRssiDiff,and RoamRssiDiff is the number of units (typically measured in dB) AP2
* is better than AP1.
* This check is not done if the value is Zero */
/* This parameter is used to decide whether to Roam or not. AP1 is
* the currently associated AP and AP2 is chosen for roaming. The
* Roaming will happen only if AP2 has better Signal Quality and it
* has a RSSI better than AP1 in terms of RoamRssiDiff,and
* RoamRssiDiff is the number of units (typically measured in dB) AP2
* is better than AP1. This check is not done if the value is Zero
*/
#define CFG_ROAM_RSSI_DIFF_NAME "RoamRssiDiff"
#define CFG_ROAM_RSSI_DIFF_MIN (0)
#define CFG_ROAM_RSSI_DIFF_MAX (30)
@@ -1630,7 +1631,8 @@ typedef enum {
* Options
* 0 -Disable DynamicDTIM
* 1 to 5 - SLM will switch to DTIM specified here when host suspends and
* switch DTIM1 when host resumes */
* switch DTIM1 when host resumes
*/
#define CFG_ENABLE_DYNAMIC_DTIM_NAME "gEnableDynamicDTIM"
#define CFG_ENABLE_DYNAMIC_DTIM_MIN (0)
#define CFG_ENABLE_DYNAMIC_DTIM_MAX (9)
@@ -2618,7 +2620,8 @@ typedef enum {
* 0 - disable
* 1 - HT LDPC enable
* 2 - VHT LDPC enable
* 3 - HT & VHT LDPC enable */
* 3 - HT & VHT LDPC enable
*/
#define CFG_TX_LDPC_ENABLE_FEATURE "gTxLdpcEnable"
#define CFG_TX_LDPC_ENABLE_FEATURE_MIN (0)
#define CFG_TX_LDPC_ENABLE_FEATURE_MAX (3)
@@ -2777,8 +2780,9 @@ typedef enum {
#define CFG_AMSDU_SUPPORT_IN_AMPDU_DEFAULT (0) /* disabled */
/* Prefer connecting to 5G AP even if its RSSI is lower by
gSelect5GHzMargin dBm than 2.4G AP.
This feature requires the dependent cfg.ini "gRoamPrefer5GHz" set to 1 */
* gSelect5GHzMargin dBm than 2.4G AP.
* This feature requires the dependent cfg.ini "gRoamPrefer5GHz" set to 1
*/
#define CFG_STRICT_5GHZ_PREF_BY_MARGIN "gSelect5GHzMargin"
#define CFG_STRICT_5GHZ_PREF_BY_MARGIN_MIN (0)
#define CFG_STRICT_5GHZ_PREF_BY_MARGIN_MAX (60)
@@ -4916,9 +4920,9 @@ enum dot11p_mode {
#define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_MAX (100)
#define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_DEFAULT (10)
/*---------------------------------------------------------------------------
Type declarations
-------------------------------------------------------------------------*/
/*
* Type declarations
*/
struct hdd_config {
/* Bitmap to track what is explicitly configured */
@@ -5102,8 +5106,9 @@ struct hdd_config {
/* Wowl pattern */
char wowlPattern[1024];
/* Control for Replay counetr. value 1 means
single replay counter for all TID */
/* Control for Replay counter. value 1 means single replay
* counter for all TID
*/
bool bSingleTidRc;
uint8_t mcastBcastFilterSetting;
bool fhostArpOffload;