fw-api: CL 22455643 - update fw common interface files

Change-Id: I4760f4515c07f575df523d7e387c07113b277a6b
WMI: add more SCAN_FLAG_EXT and HW_MODE defs
CRs-Fixed: 2262693

fw/wmi_services.h

@@ -627,6 +627,7 @@ typedef  enum  {
     WMI_SERVICE_VDEV_PARAM_CHWIDTH_WITH_NOTIFY_SUPPORT = 374, /* FW supports VDEV param channel width switch with OMN/OMI notification  */
     WMI_SERVICE_RESTRICTED_TWT_REQUESTER = 375, /* Indicates FW supports Restricted TWT REQUESTER */
     WMI_SERVICE_RESTRICTED_TWT_RESPONDER = 376, /* Indicates FW supports Restricted TWT RESPONDER */
+    WMI_SERVICE_AUX_MAC_SUPPORT = 377,
 
     WMI_MAX_EXT2_SERVICE
 

fw/wmi_unified.h

@@ -5812,6 +5812,11 @@ typedef enum {
 /* Include MLO IE in Probe req */
 #define WMI_SCAN_FLAG_EXT_INCL_MLIE_PRB_REQ           0x00004000
 
+#define WMI_SCAN_FLAG_EXT_LOW_LATENCY_SCAN    0x00008000
+#define WMI_SCAN_FLAG_EXT_RELIABLE_SCAN       0x00010000
+#define WMI_SCAN_FLAG_EXT_FAST_SCAN           0x00020000
+#define WMI_SCAN_FLAG_EXT_LOW_POWER_SCAN      0x00040000
+
 
 /**
  * new 6 GHz flags per chan (short ssid or bssid) in struct
@@ -34453,6 +34458,16 @@ typedef enum wmi_hw_mode_config_type {
                                   * and Tx/Rx trigger on any PHY will switch
                                   * from 1x1 to 2x2 on that Phy
                                   */
+    WMI_HW_MODE_AUX_EMLSR_SINGLE = 9, /* PHYA0 and AUX are active in listen mode
+                                       * in 1x1 and Tx/Rx trigger on any.
+                                       * PHY will switch from 1x1 to 2x2
+                                       * on that Phy.
+                                       */
+    WMI_HW_MODE_AUX_EMLSR_SPLIT = 10, /* PHYA1 and AUX are active in listen mode
+                                       * in 1x1 and Tx/Rx trigger on any.
+                                       * PHY will switch from 1x1 to 2x2
+                                       * on that Phy.
+                                       */
 } WMI_HW_MODE_CONFIG_TYPE;
 
 /*
@@ -36238,6 +36253,7 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_RMC_SET_MANUAL_LEADER_CMDID);
         WMI_RETURN_STRING(WMI_11D_SCAN_START_CMDID);
         WMI_RETURN_STRING(WMI_11D_SCAN_STOP_CMDID);
+        WMI_RETURN_STRING(WMI_VENDOR_PDEV_CMDID);
         WMI_RETURN_STRING(WMI_VENDOR_VDEV_CMDID);
         WMI_RETURN_STRING(WMI_VENDOR_PEER_CMDID);
         WMI_RETURN_STRING(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID); /* XPAN TWT */
@@ -36252,9 +36268,6 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_PDEV_SET_RF_PATH_CMDID); /* set RF path of PHY */
         WMI_RETURN_STRING(WMI_VDEV_PAUSE_CMDID);
         WMI_RETURN_STRING(WMI_GPIO_STATE_REQ_CMDID);
-        WMI_RETURN_STRING(WMI_VENDOR_PDEV_CMDID);
-        WMI_RETURN_STRING(WMI_VENDOR_VDEV_CMDID);
-        WMI_RETURN_STRING(WMI_VENDOR_PEER_CMDID);
     }
 
     return (A_UINT8 *) "Invalid WMI cmd";

fw/wmi_version.h

@@ -37,7 +37,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 1318
+#define __WMI_REVISION_ 1319
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work