Revert "qcacmn: Remove WMA header file dependency to fix WIN compilation"

This change reverts Change-Id: I48978e51ca6bd4416420ee66746d5bfe7adae3c9

Change-Id: I8113e233b3477c7b35a5c35a1a1c6f5f32936d8c
CRs-Fixed: 1008872

wmi/inc/wmi_unified_param.h

@@ -71,8 +71,6 @@
 #define WMI_NOISE_FLOOR_DBM_DEFAULT      (-96)
 #define WMI_MAC_IPV6_ADDR_LEN                            16
 #ifdef WLAN_NS_OFFLOAD
-#define WMI_OFFLOAD_DISABLE                         0
-#define WMI_OFFLOAD_ENABLE                          1
 /* support only one IPv6 offload */
 #define WMI_MAC_NS_OFFLOAD_SIZE                          1
 /* Number of target IP V6 addresses for NS offload */
@@ -263,17 +261,6 @@ typedef enum {
 
 #define MAX_NUM_CHAN 128
 
-/* WME stream classes */
-#define WMI_AC_BE                          0    /* best effort */
-#define WMI_AC_BK                          1    /* background */
-#define WMI_AC_VI                          2    /* video */
-#define WMI_AC_VO                          3    /* voice */
-#define WMI_TID_TO_AC(_tid) (\
-		(((_tid) == 0) || ((_tid) == 3)) ? WMI_AC_BE : \
-		(((_tid) == 1) || ((_tid) == 2)) ? WMI_AC_BK : \
-		(((_tid) == 4) || ((_tid) == 5)) ? WMI_AC_VI : \
-		WMI_AC_VO)
-
 /**
  * struct vdev_create_params - vdev create cmd parameter
  * @if_id: interface id
@@ -1150,7 +1137,14 @@ struct wmi_mgmt_params {
 	void *pdata;
 	uint16_t desc_id;
 	uint8_t *macaddr;
+#ifndef WMI_NON_TLV_SUPPORT
+	/* Following elements should be moved to WMA
+	*/
+	void *tx_complete_cb;
+	void  *tx_ota_post_proc_cb;
+	struct wmi_desc_t *wmi_desc;
 	void *qdf_ctx;
+#endif
 };
 
 /**
@@ -1668,14 +1662,6 @@ enum {
 	WMI_STA_RX_DATA_OFFLOAD            = 0x01,
 };
 
-/**
- * enum extscan_configuration_flags - extscan config flags
- * @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching
- */
-enum wmi_extscan_configuration_flags {
-	WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001,
-};
-
 /**
  * enum extscan_report_events_type - extscan report events type
  * @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full
@@ -2012,14 +1998,6 @@ struct wifi_scan_cmd_req_params {
 };
 
 #define WMI_CFG_VALID_CHANNEL_LIST_LEN    100
-/* Occupied channel list remains static */
-#define WMI_CHANNEL_LIST_STATIC                   1
-/* Occupied channel list can be learnt after init */
-#define WMI_CHANNEL_LIST_DYNAMIC_INIT             2
-/* Occupied channel list can be learnt after flush */
-#define WMI_CHANNEL_LIST_DYNAMIC_FLUSH            3
-/* Occupied channel list can be learnt after update */
-#define WMI_CHANNEL_LIST_DYNAMIC_UPDATE           4
 
 /**
  * struct plm_req_params - plm req parameter
@@ -6325,47 +6303,5 @@ struct wmi_power_dbg_params {
 	uint32_t args[WMI_MAX_POWER_DBG_ARGS];
 };
 
-/**
- * struct wmi_fw_dump_seg_req - individual segment details
- * @seg_id - segment id.
- * @seg_start_addr_lo - lower address of the segment.
- * @seg_start_addr_hi - higher address of the segment.
- * @seg_length - length of the segment.
- * @dst_addr_lo - lower address of the destination buffer.
- * @dst_addr_hi - higher address of the destination buffer.
- *
- * This structure carries the information to firmware about the
- * individual segments. This structure is part of firmware memory
- * dump request.
- */
-struct wmi_fw_dump_seg_req {
-	uint8_t seg_id;
-	uint32_t seg_start_addr_lo;
-	uint32_t seg_start_addr_hi;
-	uint32_t seg_length;
-	uint32_t dst_addr_lo;
-	uint32_t dst_addr_hi;
-};
-
-/**
- * enum wmi_userspace_log_level - Log level at userspace
- * @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection
- * @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log
- * level with minimal user impact. This is the default value.
- * @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily
- * trying to reproduce a problem, wifi performances and power can be impacted
- * but device should not otherwise be significantly impacted
- * @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to
- * actively debug a problem
- *
- * Various log levels defined in the userspace for logging applications
- */
-enum wmi_userspace_log_level {
-	WMI_LOG_LEVEL_NO_COLLECTION,
-	WMI_LOG_LEVEL_NORMAL_COLLECT,
-	WMI_LOG_LEVEL_ISSUE_REPRO,
-	WMI_LOG_LEVEL_ACTIVE,
-};
-
 #endif /* _WMI_UNIFIED_PARAM_H_ */
 

wmi/src/wmi_tlv_platform.c

@@ -34,6 +34,7 @@
 #include <osdep.h>
 #include "htc_api.h"
 #include "wmi.h"
+#include "wma.h"
 
 
 /* Following macro definitions use OS or platform specific functions */

wmi/src/wmi_unified_tlv.c

@@ -28,8 +28,8 @@
 #include "wmi_unified_tlv.h"
 #include "wmi_unified_api.h"
 #include "wmi.h"
-#include "wmi_version.h"
 #include "wmi_unified_priv.h"
+#include "wma.h"
 #include "wmi_version_whitelist.h"
 
 /**
@@ -1573,6 +1573,7 @@ QDF_STATUS send_mgmt_cmd_tlv(wmi_unified_t wmi_handle,
 	wmi_mgmt_tx_send_cmd_fixed_param *cmd;
 	int32_t cmd_len;
 	uint64_t dma_addr;
+	struct wmi_desc_t *wmi_desc = NULL;
 	void *qdf_ctx = param->qdf_ctx;
 	uint8_t *bufp;
 	int32_t bufp_len = (param->frm_len < mgmt_tx_dl_frm_len) ? param->frm_len :
@@ -1596,7 +1597,16 @@ QDF_STATUS send_mgmt_cmd_tlv(wmi_unified_t wmi_handle,
 
 	cmd->vdev_id = param->vdev_id;
 
-	cmd->desc_id = param->desc_id;
+	wmi_desc = param->wmi_desc;
+	if (!wmi_desc) {
+		WMI_LOGE("%s: Failed to get wmi_desc", __func__);
+		goto err1;
+	}
+	wmi_desc->nbuf = param->tx_frame;
+	wmi_desc->tx_cmpl_cb = param->tx_complete_cb;
+	wmi_desc->ota_post_proc_cb = param->tx_ota_post_proc_cb;
+
+	cmd->desc_id = wmi_desc->desc_id;
 	cmd->chanfreq = param->chanfreq;
 	bufp += sizeof(wmi_mgmt_tx_send_cmd_fixed_param);
 	WMITLV_SET_HDR(bufp, WMITLV_TAG_ARRAY_BYTE, roundup(bufp_len,
@@ -3126,6 +3136,12 @@ QDF_STATUS send_set_sta_keep_alive_cmd_tlv(wmi_unified_t wmi_handle,
 
 	WMI_LOGD("%s: Enter", __func__);
 
+	if (params->timeperiod > WNI_CFG_INFRA_STA_KEEP_ALIVE_PERIOD_STAMAX) {
+		WMI_LOGE("Invalid period %d Max limit %d", params->timeperiod,
+			WNI_CFG_INFRA_STA_KEEP_ALIVE_PERIOD_STAMAX);
+		return QDF_STATUS_E_FAILURE;
+	}
+
 	len = sizeof(*cmd) + sizeof(*arp_rsp);
 	buf = wmi_buf_alloc(wmi_handle, len);
 	if (!buf) {
@@ -4931,7 +4947,7 @@ QDF_STATUS wmi_get_buf_extscan_start_cmd(wmi_unified_t wmi_handle,
 	cmd->base_period = pstart->basePeriod;
 	cmd->num_buckets = nbuckets;
 	cmd->configuration_flags = 0;
-	if (pstart->configuration_flags & WMI_EXTSCAN_LP_EXTENDED_BATCHING)
+	if (pstart->configuration_flags & EXTSCAN_LP_EXTENDED_BATCHING)
 		cmd->configuration_flags |= WMI_EXTSCAN_EXTENDED_BATCHING_EN;
 	WMI_LOGI("%s: configuration_flags: 0x%x", __func__,
 			cmd->configuration_flags);
@@ -7169,7 +7185,7 @@ QDF_STATUS send_aggr_qos_cmd_tlv(wmi_unified_t wmi_handle,
 				       (wmi_vdev_wmm_addts_cmd_fixed_param));
 			cmd->vdev_id = aggr_qos_rsp_msg->sessionId;
 			cmd->ac =
-				WMI_TID_TO_AC(aggr_qos_rsp_msg->tspec[i].tsinfo.
+				TID_TO_WME_AC(aggr_qos_rsp_msg->tspec[i].tsinfo.
 					      traffic.userPrio);
 			cmd->medium_time_us =
 				aggr_qos_rsp_msg->tspec[i].mediumTime * 32;
@@ -7410,7 +7426,8 @@ QDF_STATUS send_add_clear_mcbc_filter_cmd_tlv(wmi_unified_t wmi_handle,
 	}
 	WMI_LOGD("Action:%d; vdev_id:%d; clearList:%d",
 		 cmd->action, vdev_id, clearList);
-	WMI_LOGD("MCBC MAC Addr: %pM", multicast_addr.bytes);
+	WMI_LOGD("MCBC MAC Addr: "MAC_ADDRESS_STR,
+		 MAC_ADDR_ARRAY(multicast_addr.bytes));
 
 	return 0;
 }
@@ -8492,7 +8509,7 @@ QDF_STATUS send_process_fw_mem_dump_cmd_tlv(wmi_unified_t wmi_handle,
 {
 	wmi_get_fw_mem_dump_fixed_param *cmd;
 	wmi_fw_mem_dump *dump_params;
-	struct wmi_fw_dump_seg_req *seg_req;
+	struct fw_dump_seg_req *seg_req;
 	int32_t len;
 	wmi_buf_t buf;
 	u_int8_t *buf_ptr;
@@ -8535,7 +8552,7 @@ QDF_STATUS send_process_fw_mem_dump_cmd_tlv(wmi_unified_t wmi_handle,
 	WMI_LOGI(FL("request_id:%d num_seg:%d"),
 		    mem_dump_req->request_id, mem_dump_req->num_seg);
 	for (loop = 0; loop < cmd->num_fw_mem_dump_segs; loop++) {
-		seg_req = (struct wmi_fw_dump_seg_req *)
+		seg_req = (struct fw_dump_seg_req *)
 			  ((uint8_t *)(mem_dump_req->segment) +
 			    loop * sizeof(*seg_req));
 		WMITLV_SET_HDR(&dump_params->tlv_header,
@@ -9149,7 +9166,7 @@ QDF_STATUS send_enable_specific_fw_logs_cmd_tlv(wmi_unified_t wmi_handle,
 
 	cmd_args = (uint32_t *) (buf_ptr + WMI_TLV_HDR_SIZE);
 
-	if (start_log->verbose_level >= WMI_LOG_LEVEL_ACTIVE)
+	if (start_log->verbose_level >= LOG_LEVEL_ACTIVE)
 		log_level = 1;
 	else
 		log_level = 0;
@@ -9475,7 +9492,7 @@ QDF_STATUS send_enable_arp_ns_offload_cmd_tlv(wmi_unified_t wmi_handle,
 
 		/* Fill data only for NS offload in the first ARP tuple for LA */
 		if (!arp_only &&
-		    ((param->enableOrDisable & WMI_OFFLOAD_ENABLE))) {
+		    ((param->enableOrDisable & SIR_OFFLOAD_ENABLE))) {
 			ns_tuple->flags |= WMI_NSOFF_FLAGS_VALID;
 
 #ifdef WLAN_NS_OFFLOAD
@@ -9520,13 +9537,13 @@ QDF_STATUS send_enable_arp_ns_offload_cmd_tlv(wmi_unified_t wmi_handle,
 			       WMITLV_GET_STRUCT_TLVLEN(WMI_ARP_OFFLOAD_TUPLE));
 
 		/* Fill data for ARP and NS in the first tupple for LA */
-		if ((wmi_handle->arp_info.enableOrDisable & WMI_OFFLOAD_ENABLE)
+		if ((wmi_handle->arp_info.enableOrDisable & SIR_OFFLOAD_ENABLE)
 		    && (i == 0)) {
 			/*Copy the target ip addr and flags */
 			arp_tuple->flags = WMI_ARPOFF_FLAGS_VALID;
 			A_MEMCPY(&arp_tuple->target_ipaddr,
 				 wmi_handle->arp_info.params.hostIpv4Addr,
-				 WMI_IPV4_ADDR_LEN);
+				 SIR_IPV4_ADDR_LEN);
 			WMI_LOGD("ARPOffload IP4 address: %pI4",
 				 wmi_handle->arp_info.params.hostIpv4Addr);
 		}
@@ -9547,8 +9564,7 @@ QDF_STATUS send_enable_arp_ns_offload_cmd_tlv(wmi_unified_t wmi_handle,
 
 			/* Fill data only for NS offload in the first ARP tuple for LA */
 			if (!arp_only  &&
-				((param->enableOrDisable &
-					WMI_OFFLOAD_ENABLE))) {
+				((param->enableOrDisable & SIR_OFFLOAD_ENABLE))) {
 				ns_tuple->flags |= WMI_NSOFF_FLAGS_VALID;
 #ifdef WLAN_NS_OFFLOAD
 				/*Copy the target/solicitation/remote ip addr */
@@ -10050,7 +10066,7 @@ QDF_STATUS send_roam_scan_offload_chan_list_cmd_tlv(wmi_unified_t wmi_handle,
 			       (wmi_roam_chan_list_fixed_param));
 	chan_list_fp->vdev_id = vdev_id;
 	chan_list_fp->num_chan = chan_count;
-	if (chan_count > 0 && list_type == WMI_CHANNEL_LIST_STATIC) {
+	if (chan_count > 0 && list_type == CHANNEL_LIST_STATIC) {
 		/* external app is controlling channel list */
 		chan_list_fp->chan_list_type =
 			WMI_ROAM_SCAN_CHAN_LIST_TYPE_STATIC;