qcacmn: Remove WMA header file dependency to fix WIN compilation

Remove dependency of WMA header files in common wmi layer.

Change-Id: I705e3b8cbe048f846c819dc028667061a0ce3ce2
CRs-Fixed: 1008872

wmi_unified_param.h

@@ -71,6 +71,8 @@
 #define WMI_NOISE_FLOOR_DBM_DEFAULT      (-96)
 #define WMI_MAC_IPV6_ADDR_LEN                            16
 #ifdef WLAN_NS_OFFLOAD
+#define WMI_OFFLOAD_DISABLE                         0
+#define WMI_OFFLOAD_ENABLE                          1
 /* support only one IPv6 offload */
 #define WMI_MAC_NS_OFFLOAD_SIZE                          1
 /* Number of target IP V6 addresses for NS offload */
@@ -278,6 +280,17 @@ enum wmi_dwelltime_adaptive_mode {
 
 #define MAX_NUM_CHAN 128
 
+/* WME stream classes */
+#define WMI_AC_BE                          0    /* best effort */
+#define WMI_AC_BK                          1    /* background */
+#define WMI_AC_VI                          2    /* video */
+#define WMI_AC_VO                          3    /* voice */
+#define WMI_TID_TO_AC(_tid) (\
+		(((_tid) == 0) || ((_tid) == 3)) ? WMI_AC_BE : \
+		(((_tid) == 1) || ((_tid) == 2)) ? WMI_AC_BK : \
+		(((_tid) == 4) || ((_tid) == 5)) ? WMI_AC_VI : \
+		WMI_AC_VO)
+
 /**
  * struct vdev_create_params - vdev create cmd parameter
  * @if_id: interface id
@@ -1156,14 +1169,7 @@ struct wmi_mgmt_params {
 	void *pdata;
 	uint16_t desc_id;
 	uint8_t *macaddr;
-#ifndef WMI_NON_TLV_SUPPORT
-	/* Following elements should be moved to WMA
-	*/
-	void *tx_complete_cb;
-	void  *tx_ota_post_proc_cb;
-	struct wmi_desc_t *wmi_desc;
 	void *qdf_ctx;
-#endif
 };
 
 /**
@@ -1742,6 +1748,14 @@ enum {
 	WMI_STA_RX_DATA_OFFLOAD            = 0x01,
 };
 
+/**
+ * enum extscan_configuration_flags - extscan config flags
+ * @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching
+ */
+enum wmi_extscan_configuration_flags {
+	WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001,
+};
+
 /**
  * enum extscan_report_events_type - extscan report events type
  * @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full
@@ -2088,6 +2102,14 @@ struct wifi_scan_cmd_req_params {
 };
 
 #define WMI_CFG_VALID_CHANNEL_LIST_LEN    100
+/* Occupied channel list remains static */
+#define WMI_CHANNEL_LIST_STATIC                   1
+/* Occupied channel list can be learnt after init */
+#define WMI_CHANNEL_LIST_DYNAMIC_INIT             2
+/* Occupied channel list can be learnt after flush */
+#define WMI_CHANNEL_LIST_DYNAMIC_FLUSH            3
+/* Occupied channel list can be learnt after update */
+#define WMI_CHANNEL_LIST_DYNAMIC_UPDATE           4
 
 /**
  * struct plm_req_params - plm req parameter
@@ -6412,5 +6434,48 @@ struct wmi_adaptive_dwelltime_params {
 	uint8_t passive_mon_intval;
 	uint8_t wifi_act_threshold;
 };
+
+/**
+ * struct wmi_fw_dump_seg_req - individual segment details
+ * @seg_id - segment id.
+ * @seg_start_addr_lo - lower address of the segment.
+ * @seg_start_addr_hi - higher address of the segment.
+ * @seg_length - length of the segment.
+ * @dst_addr_lo - lower address of the destination buffer.
+ * @dst_addr_hi - higher address of the destination buffer.
+ *
+ * This structure carries the information to firmware about the
+ * individual segments. This structure is part of firmware memory
+ * dump request.
+ */
+struct wmi_fw_dump_seg_req {
+	uint8_t seg_id;
+	uint32_t seg_start_addr_lo;
+	uint32_t seg_start_addr_hi;
+	uint32_t seg_length;
+	uint32_t dst_addr_lo;
+	uint32_t dst_addr_hi;
+};
+
+/**
+ * enum wmi_userspace_log_level - Log level at userspace
+ * @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection
+ * @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log
+ * level with minimal user impact. This is the default value.
+ * @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily
+ * trying to reproduce a problem, wifi performances and power can be impacted
+ * but device should not otherwise be significantly impacted
+ * @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to
+ * actively debug a problem
+ *
+ * Various log levels defined in the userspace for logging applications
+ */
+enum wmi_userspace_log_level {
+	WMI_LOG_LEVEL_NO_COLLECTION,
+	WMI_LOG_LEVEL_NORMAL_COLLECT,
+	WMI_LOG_LEVEL_ISSUE_REPRO,
+	WMI_LOG_LEVEL_ACTIVE,
+};
+
 #endif /* _WMI_UNIFIED_PARAM_H_ */