qcacld-3.0: Fix an ACS hw mode mapping discrepancy

When ACS is started, acs_cfg.hw_mode in AP context will
be set after mapping from values defined in enum
qca_wlan_vendor_acs_hw_mode to values defined in enum
eCsrPhyMode, but when ACS scan fails due to some reason,
such as scan timeout, the code in function
sap_select_default_oper_chan is still using values
defined in enum qca_wlan_vendor_acs_hw_mode to setup
the default channel.

Change the code in function sap_select_default_oper_chan
to use the values defined in enum eCsrPhyMode when
setting up the default channel.

Change-Id: Ic0d43c43bf9b9a9a36c290d2754c30ebb40bb0e3
CRs-Fixed: 2163658

core/sap/src/sap_api_link_cntl.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2017 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
  *
  * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
  *
@@ -312,7 +312,7 @@ QDF_STATUS wlansap_pre_start_bss_acs_scan_callback(tHalHandle hal_handle,
 			scan_status);
 		sap_ctx->channel =
 			sap_select_default_oper_chan(hal_handle,
-					sap_ctx->acs_cfg->hw_mode);
+					sap_ctx->acs_cfg);
 		sap_ctx->sap_state = eSAP_ACS_CHANNEL_SELECTED;
 		sap_ctx->sap_status = eSAP_STATUS_SUCCESS;
 		goto close_session;
@@ -378,7 +378,7 @@ QDF_STATUS wlansap_pre_start_bss_acs_scan_callback(tHalHandle hal_handle,
 #else
 		sap_ctx->channel =
 			sap_select_default_oper_chan(hal_handle,
-				sap_ctx->acs_cfg->hw_mode);
+				sap_ctx->acs_cfg);
 	} else {
 #endif
 		/* Valid Channel Found from scan results. */

core/sap/src/sap_fsm.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2017 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
  *
  * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
  *
@@ -1625,17 +1625,35 @@ sap_dfs_is_channel_in_nol_list(struct sap_context *sap_context,
 /**
  * sap_select_default_oper_chan() - Select operating channel based on acs hwmode
  * @hal: pointer to HAL
- * @acs_hwmode: HW mode of ACS
+ * @acs_cfg: ACS config info
  *
  * Return: selected operating channel
  */
-uint8_t sap_select_default_oper_chan(tHalHandle hal, uint32_t acs_hwmode)
+uint8_t sap_select_default_oper_chan(tHalHandle hal,
+		struct sap_acs_cfg *acs_cfg)
 {
 	uint8_t channel;
 
-	if ((acs_hwmode == QCA_ACS_MODE_IEEE80211A) ||
-			(acs_hwmode == QCA_ACS_MODE_IEEE80211AD))
+	if (NULL == acs_cfg) {
+		QDF_TRACE(QDF_MODULE_ID_SAP, QDF_TRACE_LEVEL_ERROR,
+			"ACS config invalid!");
+		QDF_BUG(0);
+		return 0;
+	}
+
+	if (acs_cfg->hw_mode == eCSR_DOT11_MODE_11a)
 		channel = SAP_DEFAULT_5GHZ_CHANNEL;
+	else if ((acs_cfg->hw_mode == eCSR_DOT11_MODE_11n) ||
+		(acs_cfg->hw_mode == eCSR_DOT11_MODE_11n_ONLY) ||
+		(acs_cfg->hw_mode == eCSR_DOT11_MODE_11ac) ||
+		(acs_cfg->hw_mode == eCSR_DOT11_MODE_11ac_ONLY) ||
+		(acs_cfg->hw_mode == eCSR_DOT11_MODE_11ax) ||
+		(acs_cfg->hw_mode == eCSR_DOT11_MODE_11ax_ONLY)) {
+		if (WLAN_REG_IS_5GHZ_CH(acs_cfg->start_ch))
+			channel = SAP_DEFAULT_5GHZ_CHANNEL;
+		else
+			channel = SAP_DEFAULT_24GHZ_CHANNEL;
+	}
 	else
 		channel = SAP_DEFAULT_24GHZ_CHANNEL;
 
@@ -1870,7 +1888,7 @@ QDF_STATUS sap_goto_channel_sel(struct sap_context *sap_context,
 				  sap_context->channel);
 			sap_context->channel =
 				sap_select_default_oper_chan(h_hal,
-					sap_context->acs_cfg->hw_mode);
+					sap_context->acs_cfg);
 
 #ifdef SOFTAP_CHANNEL_RANGE
 			if (sap_context->channelList != NULL) {

core/sap/src/sap_internal.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2017 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
  *
  * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
  *
@@ -475,5 +475,6 @@ uint8_t sap_indicate_radar(struct sap_context *sap_ctx);
 #ifdef __cplusplus
 }
 #endif
-uint8_t sap_select_default_oper_chan(tHalHandle hal, uint32_t acs_hwmode);
+uint8_t sap_select_default_oper_chan(tHalHandle hal,
+		struct sap_acs_cfg *acs_cfg);
 #endif