msm: camera: isp: Remove crop values configuration from CSID

CSID will no longer write to crop registers for all paths. UMD will
configure those registers in init packet. Crop enable logic is retained.

CRs-Fixed: 2929029
Change-Id: If6888d9094a6af3306c603d737b10c32918ab787
Signed-off-by: Anand Ravi <ananravi@codeaurora.org>

drivers/cam_isp/isp_hw_mgr/isp_hw/ife_csid_hw/cam_ife_csid_hw_ver2.c

@@ -2252,22 +2252,6 @@ static int cam_ife_csid_ver2_init_config_rdi_path(
 
 	cam_io_w_mb(val, mem_base + path_reg->cfg1_addr);
 
-	if (path_cfg->crop_enable) {
-		val = (((path_cfg->end_pixel & cmn_reg->crop_pix_start_mask) <<
-			cmn_reg->crop_shift_val) |
-			(path_cfg->start_pixel & cmn_reg->crop_pix_end_mask));
-		cam_io_w_mb(val, mem_base + path_reg->hcrop_addr);
-		CAM_DBG(CAM_ISP, "CSID:%d Horizontal crop config val: 0x%x",
-			csid_hw->hw_intf->hw_idx, val);
-
-		val = (((path_cfg->end_line & cmn_reg->crop_line_start_mask) <<
-			csid_reg->cmn_reg->crop_shift_val) |
-			(path_cfg->start_line & cmn_reg->crop_line_end_mask));
-		cam_io_w_mb(val, mem_base + path_reg->vcrop_addr);
-		CAM_DBG(CAM_ISP, "CSID:%d Vertical Crop config val: 0x%x",
-			csid_hw->hw_intf->hw_idx, val);
-	}
-
 	/* set frame drop pattern to 0 and period to 1 */
 	cam_io_w_mb(1, mem_base + path_reg->frm_drop_period_addr);
 	cam_io_w_mb(0, mem_base + path_reg->frm_drop_pattern_addr);
@@ -2452,22 +2436,6 @@ static int cam_ife_csid_ver2_init_config_pxl_path(
 
 	cam_io_w_mb(val, mem_base + path_reg->cfg1_addr);
 
-	if (path_cfg->crop_enable) {
-		val = (((path_cfg->end_pixel & cmn_reg->crop_pix_start_mask) <<
-			cmn_reg->crop_shift_val) |
-			(path_cfg->start_pixel & cmn_reg->crop_pix_end_mask));
-		cam_io_w_mb(val, mem_base + path_reg->hcrop_addr);
-		CAM_DBG(CAM_ISP, "CSID:%d Horizontal crop config val: 0x%x",
-			csid_hw->hw_intf->hw_idx, val);
-
-		val = (((path_cfg->end_line & cmn_reg->crop_line_start_mask) <<
-			csid_reg->cmn_reg->crop_shift_val) |
-			(path_cfg->start_line & cmn_reg->crop_line_end_mask));
-		cam_io_w_mb(val, mem_base + path_reg->vcrop_addr);
-		CAM_DBG(CAM_ISP, "CSID:%d Vertical Crop config val: 0x%x",
-			csid_hw->hw_intf->hw_idx, val);
-	}
-
 	/* set frame drop pattern to 0 and period to 1 */
 	cam_io_w_mb(1, mem_base + path_reg->frm_drop_period_addr);
 	cam_io_w_mb(0, mem_base + path_reg->frm_drop_pattern_addr);