samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

qcacmn: Use common Spectral config definition

Browse Source 
Today Driver and applications maintain a separate copy of
spectral config definitions, which is error prone. Solution is to
expose the definitions via a header file from driver and include
them in all applications using Spectral.

CRs-Fixed: 2432011
Change-Id: I107c2db05e1cb71b379d6f15a282a889882da2f8
This commit is contained in:
Edayilliam Jayadev
2019-04-09 15:06:46 +05:30
committed by nshrivas
parent fe5bb2e588
commit b292dd7b1a
2 changed files with 89 additions and 85 deletions
Download Patch File Download Diff File Expand all files Collapse all files

85
spectral/dispatcher/inc/wlan_spectral_public_structs.h
View File

@@ -231,91 +231,6 @@ struct spectral_diag_stats {
uint64_t spectral_invalid_detector_id;
};
/**
* struct spectral_config - spectral config parameters
* @ss_fft_period: Skip interval for FFT reports
* @ss_period: Spectral scan period
* @ss_count: # of reports to return from ss_active
* @ss_short_report: Set to report only 1 set of FFT results
* @radar_bin_thresh_sel: Select threshold to classify strong bin for FFT
* @ss_spectral_pri: Priority, and are we doing a noise power cal ?
* @ss_fft_size: Defines the number of FFT data points to compute,
* defined as a log index num_fft_pts =
* 2^ss_fft_size
* @ss_gc_ena: Set, to enable targeted gain change before
* starting the spectral scan FFT
* @ss_restart_ena: Set, to enable abort of receive frames when in high
* priority and a spectral scan is queued
* @ss_noise_floor_ref: Noise floor reference number (signed) for the
* calculation of bin power (dBm) Though stored as an
* unsigned this should be treated as a signed 8-bit int.
* @ss_init_delay: Disallow spectral scan triggers after tx/rx packets
* by setting this delay value to roughly SIFS time
* period or greater Delay timer count in units of 0.25us
* @ss_nb_tone_thr: Number of strong bins (inclusive) per sub-channel,
* below which a signal is declared a narrowband tone
* @ss_str_bin_thr: Bin/max_bin ratio threshold over which a bin is
* declared strong (for spectral scan bandwidth analysis)
* @ss_wb_rpt_mode: Set this bit to report spectral scans as EXT_BLOCKER
* (phy_error=36), if none of the sub-channels are
* deemed narrowband
* @ss_rssi_rpt_mode: Set this bit to report spectral scans as EXT_BLOCKER
* (phy_error=36), if the ADC RSSI is below the
* threshold ss_rssi_thr
* @ss_rssi_thr: ADC RSSI must be greater than or equal to this
* threshold (signed Db) to ensure spectral scan
* reporting with normal phy error codes (please see
* ss_rssi_rpt_mode above).Though stored as an unsigned
* value, this should be treated as a signed 8-bit int
* @ss_pwr_format: Format of frequency bin magnitude for spectral scan
* triggered FFTs 0: linear magnitude
* 1: log magnitude (20*log10(lin_mag), 1/2 dB step size)
* @ss_rpt_mode: Format of per-FFT reports to software for spectral
* scan triggered FFTs
* 0: No FFT report (only pulse end summary)
* 1: 2-dword summary of metrics for each completed FFT
* 2: 2-dword summary + 1x-oversampled bins(in-band) per
* FFT
* 3: 2-dword summary + 2x-oversampled bins (all) per FFT
* @ss_bin_scale: Number of LSBs to shift out to scale the FFT bins
* for spectral scan triggered FFTs
* @ss_dbm_adj: Set (with ss_pwr_format=1), to report bin
* magnitudes
* converted to dBm power using the noisefloor
* calibration results
* @ss_chn_mask: Per chain enable mask to select input ADC for search
* FFT
* @ss_nf_cal: nf calibrated values for ctl+ext
* @ss_nf_pwr: nf pwr values for ctl+ext
* @ss_nf_temp_data: temperature data taken during nf scan
*/
struct spectral_config {
uint16_t ss_fft_period;
uint16_t ss_period;
uint16_t ss_count;
uint16_t ss_short_report;
uint8_t radar_bin_thresh_sel;
uint16_t ss_spectral_pri;
uint16_t ss_fft_size;
uint16_t ss_gc_ena;
uint16_t ss_restart_ena;
uint16_t ss_noise_floor_ref;
uint16_t ss_init_delay;
uint16_t ss_nb_tone_thr;
uint16_t ss_str_bin_thr;
uint16_t ss_wb_rpt_mode;
uint16_t ss_rssi_rpt_mode;
uint16_t ss_rssi_thr;
uint16_t ss_pwr_format;
uint16_t ss_rpt_mode;
uint16_t ss_bin_scale;
uint16_t ss_dbm_adj;
uint16_t ss_chn_mask;
int8_t ss_nf_cal[AH_MAX_CHAINS * 2];
int8_t ss_nf_pwr[AH_MAX_CHAINS * 2];
int32_t ss_nf_temp_data;
};
/**
* struct spectral_scan_state - State of spectral scan
* @is_active: Is spectral scan active