diff --git a/fw/wmi_unified.h b/fw/wmi_unified.h
index 41abd062fa..7d52f8174f 100644
--- a/fw/wmi_unified.h
+++ b/fw/wmi_unified.h
@@ -8491,6 +8491,23 @@ typedef struct {
 #define WMI_HECAP_PHY_NSTSGT80MHZ_GET_D2(he_cap_phy) WMI_GET_BITS(he_cap_phy[1], 8, 3)
 #define WMI_HECAP_PHY_NSTSGT80MHZ_SET_D2(he_cap_phy, value) WMI_SET_BITS(he_cap_phy[1], 8, 3, value)
 
+/*
+ * Indicates the spatial multiplexing power save mode after receiving a
+ * Trigger frame that is in operation immediately after (re)association.
+ */
+#define WMI_HECAP_MAC_DYNSMPWRSAVE_GET_D2(he_cap2) (0)
+#define WMI_HECAP_MAC_DYNSMPWRSAVE_SET_D2(he_cap2, value) {;}
+
+/* Indicates support for Punctured Sounding */
+#define WMI_HECAP_MAC_PUNCSOUNDING_GET_D2(he_cap2) (0)
+#define WMI_HECAP_MAC_PUNCSOUNDING_SET_D2(he_cap2, value) {;}
+
+/*
+ * Indicates support for receiving a Trigger frame in an HT PPDU and
+ * receiving a Trigger frame in a VHT PPDU
+ */
+#define WMI_HECAP_MAC_HTVHTTRIGRX_GET_D2(he_cap2) (0)
+#define WMI_HECAP_MAC_HTVHTTRIGRX_SET_D2(he_cap2, value) {;}
 
 #define WMI_GET_HW_RATECODE_PREAM_V1(_rcode)     (((_rcode) >> 8) & 0x7)
 #define WMI_GET_HW_RATECODE_NSS_V1(_rcode)       (((_rcode) >> 5) & 0x7)
@@ -24863,7 +24880,11 @@ typedef struct {
 #define WMI_HECAP_PHY_LTFGIFORNDP_GET_D3(he_cap_phy) WMI_GET_BITS(he_cap_phy[0], 17, 1)
 #define WMI_HECAP_PHY_LTFGIFORNDP_SET_D3(he_cap_phy, value) WMI_SET_BITS(he_cap_phy[0], 17, 1, value)
 
-/* indicates support for the transmission of HE PPDUs using STBC with one spatial stream for <= 80MHz Tx */
+/*
+ * indicates support for the transmission of an HE TB PPDU that has a
+ * bandwidth less than or equal to 80 MHz and is using STBC and with
+ * one spatial stream
+ */
 #define WMI_HECAP_PHY_TXSTBC_GET_D3(he_cap_phy) WMI_GET_BITS(he_cap_phy[0], 18, 1)
 #define WMI_HECAP_PHY_TXSTBC_SET_D3(he_cap_phy, value) WMI_SET_BITS(he_cap_phy[0], 18, 1, value)
 
@@ -25350,6 +25371,22 @@ typedef struct {
 #define WMI_HECAP_MAC_OMCULMUDDIS_GET_D3(he_cap2) WMI_GET_BITS(he_cap2, 12, 1)
 #define WMI_HECAP_MAC_OMCULMUDDIS_SET_D3(he_cap2, value) WMI_SET_BITS(he_cap2, 12, 1, value)
 
+/* Indicates the spatial multiplexing power save mode after receiving a
+ * Trigger frame that is in operation immediately after (re)association.
+ */
+#define WMI_HECAP_MAC_DYNSMPWRSAVE_GET_D3(he_cap2) WMI_GET_BITS(he_cap2, 13, 1)
+#define WMI_HECAP_MAC_DYNSMPWRSAVE_SET_D3(he_cap2, value) WMI_SET_BITS(he_cap2, 13, 1, value)
+
+/* Indicates support for Punctured Sounding */
+#define WMI_HECAP_MAC_PUNCSOUNDING_GET_D3(he_cap2) WMI_GET_BITS(he_cap2, 14, 1)
+#define WMI_HECAP_MAC_PUNCSOUNDING_SET_D3(he_cap2, value) WMI_SET_BITS(he_cap2, 14, 1, value)
+
+/* Indicates support for receiving a Trigger frame in an HT PPDU and
+ * receiving a Trigger frame in a VHT PPDU
+ */
+#define WMI_HECAP_MAC_HTVHTTRIGRX_GET_D3(he_cap2) WMI_GET_BITS(he_cap2, 15, 1)
+#define WMI_HECAP_MAC_HTVHTTRIGRX_SET_D3(he_cap2, value) WMI_SET_BITS(he_cap2, 15, 1, value)
+
 /*
  * The following conditionally-defined macros can be used in systems
  * which only support either 802.11ax draft 2 or 802.11ax draft 3,
@@ -25570,6 +25607,12 @@ typedef struct {
   #define WMI_HECAP_MAC_HELKAD_SET(he_cap, value)        /* DEPRECATED, DO NOT USE */
   #define WMI_HECAP_PHY_MIDAMBLERXMAXNSTS_GET WMI_HECAP_PHY_MIDAMBLETXRXMAXNSTS_GET_D3 /* DEPRECATED - DO NOT USE */
   #define WMI_HECAP_PHY_MIDAMBLERXMAXNSTS_SET WMI_HECAP_PHY_MIDAMBLETXRXMAXNSTS_SET_D3 /* DEPRECATED - DO NOT USE */
+  #define WMI_HECAP_MAC_DYNSMPWRSAVE_GET WMI_HECAP_MAC_DYNSMPWRSAVE_GET_D3
+  #define WMI_HECAP_MAC_DYNSMPWRSAVE_SET WMI_HECAP_MAC_DYNSMPWRSAVE_SET_D3
+  #define WMI_HECAP_MAC_PUNCSOUNDING_GET WMI_HECAP_MAC_PUNCSOUNDING_GET_D3
+  #define WMI_HECAP_MAC_PUNCSOUNDING_SET WMI_HECAP_MAC_PUNCSOUNDING_SET_D3
+  #define WMI_HECAP_MAC_HTVHTTRIGRX_GET WMI_HECAP_MAC_HTVHTTRIGRX_GET_D3
+  #define WMI_HECAP_MAC_HTVHTTRIGRX_SET WMI_HECAP_MAC_HTVHTTRIGRX_SET_D3
 #else /* SUPPORT_11AX_D3 vs. D2 */
   /* D2 and D2- */
   #define WMI_HEOPS_COLOR_GET WMI_HEOPS_COLOR_GET_D2
@@ -25772,6 +25815,12 @@ typedef struct {
   #define WMI_HECAP_PHY_NSTSLT80MHZ_SET WMI_HECAP_PHY_NSTSLT80MHZ_SET_D2
   #define WMI_HECAP_PHY_NSTSGT80MHZ_GET WMI_HECAP_PHY_NSTSGT80MHZ_GET_D2
   #define WMI_HECAP_PHY_NSTSGT80MHZ_SET WMI_HECAP_PHY_NSTSGT80MHZ_SET_D2
+  #define WMI_HECAP_MAC_DYNSMPWRSAVE_GET WMI_HECAP_MAC_DYNSMPWRSAVE_GET_D2
+  #define WMI_HECAP_MAC_DYNSMPWRSAVE_SET WMI_HECAP_MAC_DYNSMPWRSAVE_SET_D2
+  #define WMI_HECAP_MAC_PUNCSOUNDING_GET WMI_HECAP_MAC_PUNCSOUNDING_GET_D2
+  #define WMI_HECAP_MAC_PUNCSOUNDING_SET WMI_HECAP_MAC_PUNCSOUNDING_SET_D2
+  #define WMI_HECAP_MAC_HTVHTTRIGRX_GET WMI_HECAP_MAC_HTVHTTRIGRX_GET_D2
+  #define WMI_HECAP_MAC_HTVHTTRIGRX_SET WMI_HECAP_MAC_HTVHTTRIGRX_SET_D2
 #endif /* SUPPORT_11AX_D3 */
 
 
diff --git a/fw/wmi_version.h b/fw/wmi_version.h
index ebb8fd5fc2..b2ff1bf19a 100644
--- a/fw/wmi_version.h
+++ b/fw/wmi_version.h
@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 624
+#define __WMI_REVISION_ 625
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work