qcacld-3.0: Update ini param g_auto_detect_power_failure_mode

Update ini param g_auto_detect_power_failure_mode to incorporate below
values,
0 - Don't register wow wakeup event and FW crashes on power failure
1 - Register wow wakeup event and FW sends failure event to host on
    power failure
2 - Don't register wow wakeup event and FW silently rejuvenate on
    power failure
3 - Don't register wow wakeup event and the auto power failure detect
    feature is disabled in FW.

Change-Id: I8a704954ecbacadbc035c1523fa41a18b6300f66
CRs-Fixed: 2087144

components/pmo/core/src/wlan_pmo_static_config.c

@@ -37,16 +37,31 @@ void pmo_register_wow_wakeup_events(struct wlan_objmgr_vdev *vdev)
 	uint8_t vdev_id;
 	enum tQDF_ADAPTER_MODE  vdev_opmode;
 	const char *iface_type;
+	struct pmo_psoc_priv_obj *psoc_ctx;
+	pmo_is_device_in_low_pwr_mode is_low_pwr_mode;
 
 	vdev_opmode = pmo_get_vdev_opmode(vdev);
 	vdev_id = pmo_vdev_get_id(vdev);
 	pmo_info("vdev_opmode %d vdev_id %d", vdev_opmode, vdev_id);
 
 	switch (vdev_opmode) {
+	case QDF_STA_MODE:
 	case QDF_P2P_CLIENT_MODE:
+		/* set power on failure event only for STA and P2P_CLI mode*/
+		psoc_ctx =  pmo_vdev_get_psoc_priv(vdev);
+		if (psoc_ctx->psoc_cfg.auto_power_save_fail_mode ==
+		    PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE){
+			qdf_spin_lock(&psoc_ctx->lock);
+			is_low_pwr_mode = psoc_ctx->is_device_in_low_pwr_mode;
+			qdf_spin_unlock(&psoc_ctx->lock);
+			if (is_low_pwr_mode && is_low_pwr_mode(vdev_id))
+				pmo_set_wow_event_bitmap(
+					WOW_CHIP_POWER_FAILURE_DETECT_EVENT,
+					PMO_WOW_MAX_EVENT_BM_LEN,
+					event_bitmap);
+		}
 	case QDF_P2P_DEVICE_MODE:
 	case QDF_OCB_MODE:
-	case QDF_STA_MODE:
 	case QDF_MONITOR_MODE:
 		iface_type = "STA";
 		pmo_set_sta_wow_bitmask(event_bitmap, PMO_WOW_MAX_EVENT_BM_LEN);

components/pmo/core/src/wlan_pmo_suspend_resume.c

@@ -256,7 +256,8 @@ void pmo_core_configure_dynamic_wake_events(struct wlan_objmgr_psoc *psoc)
 
 		psoc_ctx = pmo_psoc_get_priv(psoc);
 
-		if (psoc_ctx->psoc_cfg.auto_power_save_fail_mode &&
+		if (psoc_ctx->psoc_cfg.auto_power_save_fail_mode ==
+		     PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE &&
 		    (adapter_type == QDF_STA_MODE ||
 		     adapter_type == QDF_P2P_CLIENT_MODE)
 		   ) {

components/pmo/dispatcher/inc/wlan_pmo_common_public_struct.h

@@ -239,6 +239,24 @@ enum pmo_offload_trigger {
 	pmo_offload_trigger_max,
 };
 
+/**
+ * enum pmo_auto_pwr_detect_failure_mode_t - auto detect failure modes
+ * @PMO_FW_TO_CRASH_ON_PWR_FAILURE: Don't register wow wakeup event and FW
+ * crashes on power failure
+ * @PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE: Register wow wakeup event and FW
+ * sends failure event to host on power failure
+ * @PMO_FW_TO_REJUVENATE_ON_PWR_FAILURE: Don't register wow wakeup event and
+ * FW silently rejuvenate on power failure
+ * @PMO_AUTO_PWR_FAILURE_DETECT_DISABLE: Don't register wow wakeup event and the
+ * auto power failure detect feature is disabled in FW.
+ */
+enum pmo_auto_pwr_detect_failure_mode {
+	PMO_FW_TO_CRASH_ON_PWR_FAILURE,
+	PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE,
+	PMO_FW_TO_REJUVENATE_ON_PWR_FAILURE,
+	PMO_AUTO_PWR_FAILURE_DETECT_DISABLE
+};
+
 /**
  * struct pmo_psoc_cfg - user configuration required for pmo
  * @ptrn_match_enable_all_vdev: true when pattern match is enable for all vdev
@@ -293,7 +311,7 @@ struct pmo_psoc_cfg {
 	uint8_t sta_mod_dtim;
 	uint8_t sta_max_li_mod_dtim;
 	uint8_t power_save_mode;
-	bool auto_power_save_fail_mode;
+	enum pmo_auto_pwr_detect_failure_mode auto_power_save_fail_mode;
 };
 
 #endif /* end  of _WLAN_PMO_COMMONP_STRUCT_H_ */

core/cds/inc/cds_config.h

@@ -29,6 +29,7 @@
 
 #include "osdep.h"
 #include "cdp_txrx_mob_def.h"
+#include "wlan_pmo_common_public_struct.h"
 
 /**
  * enum cfg_sub_20_channel_width: ini values for su 20 mhz channel width
@@ -162,7 +163,7 @@ struct cds_config_info {
 	struct ol_tx_sched_wrr_ac_specs_t ac_specs[TX_WMM_AC_NUM];
 	enum active_bpf_mode active_uc_bpf_mode;
 	enum active_bpf_mode active_mc_bc_bpf_mode;
-	bool auto_power_save_fail_mode;
+	enum pmo_auto_pwr_detect_failure_mode auto_power_save_fail_mode;
 	uint8_t ito_repeat_count;
 	bool force_target_assert_enabled;
 };

core/hdd/inc/wlan_hdd_cfg.h

@@ -7755,9 +7755,9 @@ enum hdd_link_speed_rpt_type {
 /*
  * <ini>
  * g_auto_detect_power_failure_mode - auto detect power save failure mode
- * @Min: 0 : Recovery
- * @Max: 1 : WMI
- * @Default: 0
+ * @Min: PMO_FW_TO_CRASH_ON_PWR_FAILURE
+ * @Max: PMO_AUTO_PWR_FAILURE_DETECT_DISABLE
+ * @Default: PMO_FW_TO_CRASH_ON_PWR_FAILURE
  *
  * This ini specifies the behavior of FW in case of
  * CHIP_POWER_SAVE_FAIL_DETECTED event
@@ -7766,10 +7766,11 @@ enum hdd_link_speed_rpt_type {
  *
  * </ini>
  */
-#define CFG_AUTO_DETECT_POWER_FAIL_MODE_NAME  "g_auto_detect_power_failure_mode"
-#define CFG_AUTO_DETECT_POWER_FAIL_MODE_DEFAULT         (0)
-#define CFG_AUTO_DETECT_POWER_FAIL_MODE_MIN             (0)
-#define CFG_AUTO_DETECT_POWER_FAIL_MODE_MAX             (1)
+#define CFG_AUTO_DETECT_POWER_FAIL_MODE_NAME    "g_auto_detect_power_failure_mode"
+#define CFG_AUTO_DETECT_POWER_FAIL_MODE_DEFAULT (PMO_FW_TO_CRASH_ON_PWR_FAILURE)
+#define CFG_AUTO_DETECT_POWER_FAIL_MODE_MIN     (PMO_FW_TO_CRASH_ON_PWR_FAILURE)
+#define CFG_AUTO_DETECT_POWER_FAIL_MODE_MAX \
+					(PMO_AUTO_PWR_FAILURE_DETECT_DISABLE)
 /*
  * <ini>
  * gMaxAmsduNum - Max number of MSDU's in aggregate
@@ -13007,7 +13008,7 @@ struct hdd_config {
 	uint8_t enable_rts_sifsbursting;
 	uint8_t max_mpdus_inampdu;
 	uint16_t sap_max_mcs_txdata;
-	uint8_t auto_pwr_save_fail_mode;
+	enum pmo_auto_pwr_detect_failure_mode auto_pwr_save_fail_mode;
 	uint16_t num_11b_tx_chains;
 	uint16_t num_11ag_tx_chains;
 	uint8_t ito_repeat_count;

core/hdd/src/wlan_hdd_main.c

@@ -9419,6 +9419,9 @@ int hdd_configure_cds(struct hdd_context *hdd_ctx, struct hdd_adapter *adapter)
 	if (0 != wlan_hdd_set_wow_pulse(hdd_ctx, true))
 		hdd_debug("Failed to set wow pulse");
 
+	sme_cli_set_command(0, WMI_PDEV_AUTO_DETECT_POWER_FAILURE,
+			    hdd_ctx->config->auto_pwr_save_fail_mode, PDEV_CMD);
+
 	return 0;
 
 cds_disable:

core/wma/src/wma_main.c

@@ -2865,7 +2865,8 @@ QDF_STATUS wma_open(struct wlan_objmgr_psoc *psoc,
 	wma_handle->ito_repeat_count = cds_cfg->ito_repeat_count;
 
 	/* Register PWR_SAVE_FAIL event only in case of recovery(1) */
-	if (cds_cfg->auto_power_save_fail_mode) {
+	if (cds_cfg->auto_power_save_fail_mode ==
+	    PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE) {
 		wmi_unified_register_event_handler(wma_handle->wmi_handle,
 			WMI_PDEV_CHIP_POWER_SAVE_FAILURE_DETECTED_EVENTID,
 			wma_chip_power_save_failure_detected_handler,