qcacld-3.0: Extend cfg80211 configure API

qcacld-2.0 to qcacld-3.0 propagation

Extend cfg80211 configure API:
1. Vendor attribute for non aggregate/11g sw retry threshold.
2. Vendor attribute for aggregate sw retry threshold.
3. Vendor attribute for MGMT frame sw retry threshold.
4. Vendor attribute for CTRL frame sw retry threshold.
5. Vendor attribute for propagation delay.

Change-Id: Icdcb0e83432299014fb46507bdd5978b76919ab5
CRs-Fixed: 1035577

core/hdd/src/wlan_hdd_cfg80211.c

@@ -3889,6 +3889,11 @@ wlan_hdd_wifi_config_policy[QCA_WLAN_VENDOR_ATTR_CONFIG_MAX + 1] = {
 	[QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND] = {.type = NLA_U8 },
 	[QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION] = {.type = NLA_U8 },
 	[QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION] = {.type = NLA_U8 },
+	[QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY] = {.type = NLA_U8 },
+	[QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY] = {.type = NLA_U8 },
+	[QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY] = {.type = NLA_U8 },
+	[QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY] = {.type = NLA_U8 },
+	[QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY] = {.type = NLA_U8 },
 };
 
 /**
@@ -3959,6 +3964,8 @@ __wlan_hdd_cfg80211_wifi_configuration_set(struct wiphy *wiphy,
 	uint8_t *scan_ie;
 	struct sir_set_tx_rx_aggregation_size request;
 	QDF_STATUS qdf_status;
+	uint8_t retry, delay;
+	int param_id;
 
 	ENTER_DEV(dev);
 
@@ -4068,6 +4075,57 @@ __wlan_hdd_cfg80211_wifi_configuration_set(struct wiphy *wiphy,
 			access_policy);
 	}
 
+	if (tb[QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY]) {
+		retry = nla_get_u8(tb[
+				QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY]);
+		retry = retry > CFG_NON_AGG_RETRY_MAX ?
+				CFG_NON_AGG_RETRY_MAX : retry;
+		param_id = WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH;
+		ret_val = wma_cli_set_command(adapter->sessionId, param_id,
+					      retry, PDEV_CMD);
+	}
+
+	if (tb[QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY]) {
+		retry = nla_get_u8(tb[QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY]);
+		retry = retry > CFG_AGG_RETRY_MAX ?
+			CFG_AGG_RETRY_MAX : retry;
+
+		/* Value less than CFG_AGG_RETRY_MIN has side effect to t-put */
+		retry = ((retry > 0) && (retry < CFG_AGG_RETRY_MIN)) ?
+				CFG_AGG_RETRY_MIN : retry;
+		param_id = WMI_PDEV_PARAM_AGG_SW_RETRY_TH;
+		ret_val = wma_cli_set_command(adapter->sessionId, param_id,
+					      retry, PDEV_CMD);
+	}
+
+	if (tb[QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY]) {
+		retry = nla_get_u8(tb[QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY]);
+		retry = retry > CFG_MGMT_RETRY_MAX ?
+				CFG_MGMT_RETRY_MAX : retry;
+		param_id = WMI_PDEV_PARAM_MGMT_RETRY_LIMIT;
+		ret_val = wma_cli_set_command(adapter->sessionId, param_id,
+					      retry, PDEV_CMD);
+	}
+
+	if (tb[QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY]) {
+		retry = nla_get_u8(tb[QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY]);
+		retry = retry > CFG_CTRL_RETRY_MAX ?
+				CFG_CTRL_RETRY_MAX : retry;
+		param_id = WMI_PDEV_PARAM_CTRL_RETRY_LIMIT;
+		ret_val = wma_cli_set_command(adapter->sessionId, param_id,
+					      retry, PDEV_CMD);
+	}
+
+	if (tb[QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY]) {
+		delay = nla_get_u8(tb[
+				QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY]);
+		delay = delay > CFG_PROPAGATION_DELAY_MAX ?
+				CFG_PROPAGATION_DELAY_MAX : delay;
+		param_id = WMI_PDEV_PARAM_PROPAGATION_DELAY;
+		ret_val = wma_cli_set_command(adapter->sessionId, param_id,
+					      delay, PDEV_CMD);
+	}
+
 	if (vendor_ie_present && access_policy_present) {
 		if (access_policy == QCA_ACCESS_POLICY_DENY_UNLESS_LISTED) {
 			access_policy =

core/hdd/src/wlan_hdd_cfg80211.h

@@ -2325,6 +2325,13 @@ enum qca_wlan_vendor_acs_hw_mode {
 	QCA_ACS_MODE_IEEE80211ANY,
 };
 
+#define CFG_NON_AGG_RETRY_MAX                  (31)
+#define CFG_AGG_RETRY_MAX                      (31)
+#define CFG_MGMT_RETRY_MAX                     (31)
+#define CFG_CTRL_RETRY_MAX                     (31)
+#define CFG_PROPAGATION_DELAY_MAX              (63)
+#define CFG_AGG_RETRY_MIN                      (5)
+
 /**
  * enum qca_access_policy - access control policy
  *
@@ -2370,6 +2377,13 @@ enum qca_ignore_assoc_disallowed {
  *      Tx aggregation size (8-bit unsigned value)
  * @QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION:
  *       Rx aggregation size (8-bit unsigned value)
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY:
+ *                                   Non aggregrate/11g sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY: aggregrate sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY: management frame sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY: control frame sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY:
+ *			     propagation delay for 2G/5G band (units in us)
  * @QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES: Update the default scan IEs
  * @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND:
  *                         Unsigned 32-bit value attribute for generic commands
@@ -2406,6 +2420,22 @@ enum qca_wlan_vendor_config {
 	QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION,
 	QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION,
 
+	/* 8-bit unsigned value to configure the Non aggregrate/11g sw
+	 * retry threshold (0 disable, 31 max). */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY,
+	/* 8-bit unsigned value to configure the aggregrate sw
+	 * retry threshold (0 disable, 31 max). */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY,
+	/* 8-bit unsigned value to configure the MGMT frame
+	 * retry threshold (0 disable, 31 max). */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY,
+	/* 8-bit unsigned value to configure the CTRL frame
+	 * retry threshold (0 disable, 31 max). */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY,
+	/* 8-bit unsigned value to configure the propagation delay for
+	 * 2G/5G band (0~63, units in us) */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY,
+
 	/* Attribute used to set scan default IEs to the driver.
 	*
 	* These IEs can be used by scan operations that will be initiated by