Преглед на файлове

asoc: remove HDMI codec drivers for 5.15

Display HDMI codec driver is not ready yet at this point.
It is not necessary for audio bringup on the kailua RUMI,
so the module is removed temporarily

Change-Id: Icca4e516b11d96252e928a4c9dda59f338e98cca
Signed-off-by: Junkai Cai <[email protected]>
Junkai Cai преди 3 години
родител
ревизия
a36cfd915c
променени са 5 файла, в които са добавени 2 реда и са изтрити 15 реда
  1. 0 9
      Android.mk
  2. 1 2
      audio_kernel_product_board.mk
  3. 1 2
      audio_kernel_vendor_board.mk
  4. 0 1
      config/kalamaauto.conf
  5. 0 1
      config/kalamaautoconf.h

+ 0 - 9
Android.mk

@@ -312,15 +312,6 @@ LOCAL_MODULE_DEBUG_ENABLE := true
 LOCAL_MODULE_PATH         := $(KERNEL_MODULES_OUT)
 include $(DLKM_DIR)/Build_external_kernelmodule.mk
 ###########################################################
-include $(CLEAR_VARS)
-LOCAL_SRC_FILES           := $(AUDIO_SRC_FILES)
-LOCAL_MODULE              := hdmi_dlkm.ko
-LOCAL_MODULE_KBUILD_NAME  := asoc/codecs/hdmi_dlkm.ko
-LOCAL_MODULE_TAGS         := optional
-LOCAL_MODULE_DEBUG_ENABLE := true
-LOCAL_MODULE_PATH         := $(KERNEL_MODULES_OUT)
-include $(DLKM_DIR)/Build_external_kernelmodule.mk
-###########################################################
 
 endif # DLKM check
 endif # supported target check

+ 1 - 2
audio_kernel_product_board.mk

@@ -27,5 +27,4 @@ PRODUCT_PACKAGES += $(KERNEL_MODULES_OUT)/q6_notifier_dlkm.ko\
 	$(KERNEL_MODULES_OUT)/lpass_cdc_dlkm.ko \
 	$(KERNEL_MODULES_OUT)/wsa883x_dlkm.ko \
 	$(KERNEL_MODULES_OUT)/wcd938x_dlkm.ko \
-	$(KERNEL_MODULES_OUT)/wcd938x_slave_dlkm.ko \
-	$(KERNEL_MODULES_OUT)/hdmi_dlkm.ko
+	$(KERNEL_MODULES_OUT)/wcd938x_slave_dlkm.ko

+ 1 - 2
audio_kernel_vendor_board.mk

@@ -40,8 +40,7 @@ BOARD_VENDOR_KERNEL_MODULES += $(KERNEL_MODULES_OUT)/q6_notifier_dlkm.ko\
 	$(KERNEL_MODULES_OUT)/lpass_cdc_dlkm.ko \
 	$(KERNEL_MODULES_OUT)/wsa883x_dlkm.ko \
 	$(KERNEL_MODULES_OUT)/wcd938x_dlkm.ko \
-	$(KERNEL_MODULES_OUT)/wcd938x_slave_dlkm.ko \
-	$(KERNEL_MODULES_OUT)/hdmi_dlkm.ko
+	$(KERNEL_MODULES_OUT)/wcd938x_slave_dlkm.ko
 endif
 endif
 endif

+ 0 - 1
config/kalamaauto.conf

@@ -32,4 +32,3 @@ export CONFIG_SND_SOC_WCD_MBHC_ADC=m
 export CONFIG_SND_SOC_SWR_DMIC=m
 export CONFIG_SND_SWR_HAPTICS=m
 export CONFIG_SND_SOC_MSM_STUB=m
-export CONFIG_SND_SOC_MSM_HDMI_CODEC_RX=m

+ 0 - 1
config/kalamaautoconf.h

@@ -39,4 +39,3 @@
 #define CONFIG_SND_SOC_SWR_DMIC 1
 #define CONFIG_SND_SWR_HAPTICS 1
 #define CONFIG_SND_SOC_MSM_STUB 1
-#define CONFIG_SND_SOC_MSM_HDMI_CODEC_RX 1