qcacmn: Add set link source data structure

Add new data structure to save the external/internal set link
request. The different source of request has different priority.
In some situations, a certain request may not be honored if
it conflicts with higher priority request.

Change-Id: Ia0bce7b50436e4e2b52d2c4948c7aa8a3a7a0a97
CRs-Fixed: 3654159

umac/mlo_mgr/inc/wlan_mlo_mgr_public_structs.h

@@ -548,6 +548,84 @@ struct mlo_sta_quiet_status {
 	bool valid_status;
 };
 
+/**
+ * enum mlo_link_force_mode: MLO link force modes
+ * @MLO_LINK_FORCE_MODE_ACTIVE:
+ *  Force specific links active
+ * @MLO_LINK_FORCE_MODE_INACTIVE:
+ *  Force specific links inactive
+ * @MLO_LINK_FORCE_MODE_ACTIVE_NUM:
+ *  Force active a number of links, firmware to decide which links to inactive
+ * @MLO_LINK_FORCE_MODE_INACTIVE_NUM:
+ *  Force inactive a number of links, firmware to decide which links to inactive
+ * @MLO_LINK_FORCE_MODE_NO_FORCE:
+ *  Cancel the force operation of specific links, allow firmware to decide
+ * @MLO_LINK_FORCE_MODE_ACTIVE_INACTIVE: Force specific links active and
+ *  force specific links inactive
+ */
+enum mlo_link_force_mode {
+	MLO_LINK_FORCE_MODE_ACTIVE       = 1,
+	MLO_LINK_FORCE_MODE_INACTIVE     = 2,
+	MLO_LINK_FORCE_MODE_ACTIVE_NUM   = 3,
+	MLO_LINK_FORCE_MODE_INACTIVE_NUM = 4,
+	MLO_LINK_FORCE_MODE_NO_FORCE     = 5,
+	MLO_LINK_FORCE_MODE_ACTIVE_INACTIVE = 6,
+};
+
+/**
+ * enum mlo_link_force_reason: MLO link force reasons
+ * @MLO_LINK_FORCE_REASON_CONNECT:
+ *  Set force specific links because of new connection
+ * @MLO_LINK_FORCE_REASON_DISCONNECT:
+ *  Set force specific links because of new dis-connection
+ * @MLO_LINK_FORCE_REASON_LINK_REMOVAL:
+ *  Set force specific links because of AP side link removal
+ * @MLO_LINK_FORCE_REASON_TDLS:
+ *  Set force specific links because of TDLS operation
+ */
+enum mlo_link_force_reason {
+	MLO_LINK_FORCE_REASON_CONNECT    = 1,
+	MLO_LINK_FORCE_REASON_DISCONNECT = 2,
+	MLO_LINK_FORCE_REASON_LINK_REMOVAL = 3,
+	MLO_LINK_FORCE_REASON_TDLS = 4,
+};
+
+/**
+ * enum set_link_source - set link source
+ * @SET_LINK_FROM_CONCURRENCY: concurrent connection request
+ * @SET_LINK_FROM_VENDOR_CMD: vendor command request
+ * @SET_LINK_FROM_TDLS: tdls command request
+ * @SET_LINK_SOURCE_MAX: max num of source
+ */
+enum set_link_source {
+	SET_LINK_FROM_CONCURRENCY = 0,
+	SET_LINK_FROM_VENDOR_CMD = 1,
+	SET_LINK_FROM_TDLS = 2,
+	SET_LINK_SOURCE_MAX,
+};
+
+/**
+ * struct set_link_req - set link request
+ * @mode: set link mode
+ * @reason: reason of set link
+ * @force_active_bitmap: force active link bitmap
+ * @force_inactive_bitmap: force inactive link bitmap
+ * @force_active_num: force active link num
+ * @force_active_num_bitmap: force active num link bitmap
+ * @force_inactive_num: force inactive link num
+ * @force_inactive_num_bitmap: force inactive num link bitmap
+ */
+struct set_link_req {
+	enum mlo_link_force_mode mode;
+	enum mlo_link_force_reason reason;
+	uint16_t force_active_bitmap;
+	uint16_t force_inactive_bitmap;
+	uint8_t force_active_num;
+	uint16_t force_active_num_bitmap;
+	uint8_t force_inactive_num;
+	uint16_t force_inactive_num_bitmap;
+};
+
 /**
  * struct ml_link_force_state - link force state.
  * @force_active_bitmap: force active link bitmap
@@ -576,9 +654,11 @@ struct ml_link_force_state {
  * struct wlan_link_force_context - link force ctx.
  * @force_state: current force active/inactive states which
  * have been sent to target
+ * @reqs: request of set link
  */
 struct wlan_link_force_context {
 	struct ml_link_force_state force_state;
+	struct set_link_req reqs[SET_LINK_SOURCE_MAX];
 };
 
 #if defined(UMAC_SUPPORT_MLNAWDS) || defined(MESH_MODE_SUPPORT)
@@ -1248,48 +1328,6 @@ struct mlo_osif_ext_ops {
 /* maximum size of link number param array for MLO link set active command */
 #define MLO_LINK_NUM_SZ 2
 
-/**
- * enum mlo_link_force_mode: MLO link force modes
- * @MLO_LINK_FORCE_MODE_ACTIVE:
- *  Force specific links active
- * @MLO_LINK_FORCE_MODE_INACTIVE:
- *  Force specific links inactive
- * @MLO_LINK_FORCE_MODE_ACTIVE_NUM:
- *  Force active a number of links, firmware to decide which links to inactive
- * @MLO_LINK_FORCE_MODE_INACTIVE_NUM:
- *  Force inactive a number of links, firmware to decide which links to inactive
- * @MLO_LINK_FORCE_MODE_NO_FORCE:
- *  Cancel the force operation of specific links, allow firmware to decide
- * @MLO_LINK_FORCE_MODE_ACTIVE_INACTIVE: Force specific links active and
- *  force specific links inactive
- */
-enum mlo_link_force_mode {
-	MLO_LINK_FORCE_MODE_ACTIVE       = 1,
-	MLO_LINK_FORCE_MODE_INACTIVE     = 2,
-	MLO_LINK_FORCE_MODE_ACTIVE_NUM   = 3,
-	MLO_LINK_FORCE_MODE_INACTIVE_NUM = 4,
-	MLO_LINK_FORCE_MODE_NO_FORCE     = 5,
-	MLO_LINK_FORCE_MODE_ACTIVE_INACTIVE = 6,
-};
-
-/**
- * enum mlo_link_force_reason: MLO link force reasons
- * @MLO_LINK_FORCE_REASON_CONNECT:
- *  Set force specific links because of new connection
- * @MLO_LINK_FORCE_REASON_DISCONNECT:
- *  Set force specific links because of new dis-connection
- * @MLO_LINK_FORCE_REASON_LINK_REMOVAL:
- *  Set force specific links because of AP side link removal
- * @MLO_LINK_FORCE_REASON_TDLS:
- *  Set force specific links because of TDLS operation
- */
-enum mlo_link_force_reason {
-	MLO_LINK_FORCE_REASON_CONNECT    = 1,
-	MLO_LINK_FORCE_REASON_DISCONNECT = 2,
-	MLO_LINK_FORCE_REASON_LINK_REMOVAL = 3,
-	MLO_LINK_FORCE_REASON_TDLS = 4,
-};
-
 /**
  * struct mlo_link_set_active_resp: MLO link set active response structure
  * @status: Return status, 0 for success, non-zero otherwise