qcacld-3.0: Move IBSS INI params to converged CFG component

Update qcacld driver to move IBSS INI params to converged CFG component and cleanup HDD ini entriesi Change-Id: Id8e4c0505113e556a8d64915a648f17fc5c0daf5 CRs-fixed: 2358493
2018-11-28 18:27:32 -08:00
--- a/mlme/dispatcher/inc/cfg_mlme_ibss.h
+++ b/mlme/dispatcher/inc/cfg_mlme_ibss.h
@@ -0,0 +1,379 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/**
+ * DOC: This file contains centralized definitions of converged configuration.
+ */
+
+#ifndef __CFG_MLME_IBSS_H
+#define __CFG_MLME_IBSS_H
+
+/*
+ * <ini>
+ * g_IBSS_AUTO_BSSID - Control IBSS Auto BSSID setup
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * Control IBSS Auto BSSID enable / disable
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_AUTO_BSSID CFG_BOOL( \
+			"gIbssAutoBssid", \
+			1, \
+			"Enable Auto BSSID for IBSS")
+
+/*
+ * <ini>
+ * gAdHocChannel5G - Default 5Ghz IBSS channel if channel is not
+ * provided by supplicant.
+ * @Min: 36
+ * @Max: 165
+ * @Default: 44
+ *
+ * This ini is used to set default 5Ghz IBSS channel
+ * if channel is not provided by supplicant and band is 5Ghz
+ *
+ * Related: None
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_ADHOC_CHANNEL_5GHZ CFG_INI_UINT( \
+		"gAdHocChannel5G", \
+		36, \
+		165, \
+		44, \
+		CFG_VALUE_OR_DEFAULT, \
+		"Default 5Ghz IBSS channel if not provided by supplicant")
+
+/*
+ * <ini>
+ * gAdHocChannel24G - Default 2.4Ghz IBSS channel if channel is not
+ * provided by supplicant.
+ * @Min: 1
+ * @Max: 14
+ * @Default: 6
+ *
+ * This ini is used to set default 2.4Ghz IBSS channel
+ * if channel is not provided by supplicant and band is 2.4Ghz
+ *
+ * Related: None
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_ADHOC_CHANNEL_24GHZ CFG_INI_UINT( \
+		"gAdHocChannel24G", \
+		1, \
+		14, \
+		6, \
+		CFG_VALUE_OR_DEFAULT, \
+		"Default 2.4Ghz IBSS channel if not provided by supplicant")
+
+/*
+ * <ini>
+ * gCoalesingInIBSS - If IBSS coalesing is enabled.
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * This ini is used to set IBSS coalesing
+ *
+ * Related: None
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_COALESING CFG_INI_BOOL( \
+		"gCoalesingInIBSS", \
+		0, \
+		"IBSS coalesing control param")
+
+/*
+ * <ini>
+ * gIbssATIMWinSize - Set IBSS ATIM window size
+ * @Min: 0
+ * @Max: 50
+ * @Default: 0
+ *
+ * This ini is used to set IBSS ATIM window size
+ *
+ * Related: None
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_ATIM_WIN_SIZE CFG_INI_UINT( \
+		"gIbssATIMWinSize", \
+		0, \
+		50, \
+		0, \
+		CFG_VALUE_OR_DEFAULT, \
+		"Set IBSS ATIM window size")
+
+/*
+ * <ini>
+ * gIbssIsPowerSaveAllowed - Indicates if IBSS Power Save is
+ * supported or not
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to Indicates if IBSS Power Save is
+ * supported or not. When not allowed,IBSS station has
+ * to stay awake all the time and should never set PM=1
+ * in its transmitted frames.
+ *
+ * Related: valid only when gIbssATIMWinSize is non-zero
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_IS_POWER_SAVE_ALLOWED CFG_INI_BOOL( \
+		"gIbssIsPowerSaveAllowed", \
+		1, \
+		"IBSS Power Save control")
+
+/*
+ * <ini>
+ * gIbssIsPowerCollapseAllowed - Indicates if IBSS Power Collapse
+ * is allowed
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to indicates if IBSS Power Collapse
+ * is allowed
+ *
+ * Related: None
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_IS_POWER_COLLAPSE_ALLOWED CFG_INI_BOOL( \
+		"gIbssIsPowerCollapseAllowed", \
+		1, \
+		"Indicates if IBSS Power Collapse is allowed")
+
+/*
+ * <ini>
+ * gIbssAwakeOnTxRx - Indicates whether IBSS station
+ * can exit power save mode and enter power active
+ * state whenever there is a TX/RX activity.
+ *
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * This ini is used to ndicates whether IBSS station
+ * can exit power save mode and enter power active
+ * state whenever there is a TX/RX activity.
+ *
+ * Related: None
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_AWAKE_ON_TX_RX CFG_INI_BOOL( \
+		"gIbssAwakeOnTxRx", \
+		0, \
+		"IBSS sta power save mode on TX/RX activity")
+
+/*
+ * <ini>
+ * gIbssInactivityTime - Indicates the data
+ * inactivity time in number of beacon intervals
+ * after which IBSS station re-inters power save
+ *
+ * @Min: 1
+ * @Max: 10
+ * @Default: 1
+ *
+ * In IBSS mode if Awake on TX/RX activity is enabled
+ * Ibss Inactivity parameter indicates the data
+ * inactivity time in number of beacon intervals
+ * after which IBSS station re-inters power save
+ * by sending Null frame with PM=1
+ *
+ * Related: Aplicable if gIbssAwakeOnTxRx is enabled
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_INACTIVITY_TIME CFG_INI_UINT( \
+		"gIbssInactivityTime", \
+		1, \
+		10, \
+		1, \
+		CFG_VALUE_OR_DEFAULT, \
+		"No of Beacons intervals of data inactivity for power save")
+
+/*
+ * <ini>
+ * gIbssTxSpEndInactivityTime - Indicates the time after
+ * which TX Service Period is terminated by
+ * sending a Qos Null frame with EOSP.
+ *
+ * @Min: 0
+ * @Max: 100
+ * @Default: 0
+ *
+ * In IBSS mode Tx Service Period Inactivity
+ * time in msecs indicates the time after
+ * which TX Service Period is terminated by
+ * sending a Qos Null frame with EOSP.
+ * If value is 0, TX SP is terminated with the
+ * last buffered packet itself instead of waiting
+ * for the inactivity.
+ *
+ * Related: None
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_TXSP_END_INACTIVITY CFG_INI_UINT( \
+		"gIbssTxSpEndInactivityTime", \
+		0, \
+		100, \
+		0, \
+		CFG_VALUE_OR_DEFAULT, \
+		"TX service period inactivity timeout")
+
+/*
+ * <ini>
+ * gIbssPsWarmupTime - PS-supporting device
+ * does not enter protocol sleep state during first
+ * gIbssPsWarmupTime seconds.
+ *
+ * @Min: 0
+ * @Max: 65535
+ * @Default: 0
+ *
+ * When IBSS network is initialized, PS-supporting device
+ * does not enter protocol sleep state during first
+ * gIbssPsWarmupTime seconds.
+ *
+ * Related: valid if gIbssIsPowerSaveAllowed is set
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_PS_WARMUP_TIME CFG_INI_UINT( \
+		"gIbssPsWarmupTime", \
+		0, \
+		65535, \
+		0, \
+		CFG_VALUE_OR_DEFAULT, \
+		"IBSS Power save skip time")
+
+/*
+ * <ini>
+ * gIbssPs1RxChainInAtim - IBSS Power Save Enable/Disable 1 RX
+ * chain usage during the ATIM window
+ *
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * IBSS Power Save Enable/Disable 1 RX
+ * chain usage during the ATIM window
+ *
+ * Related: Depend on gIbssIsPowerSaveAllowed
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW CFG_INI_BOOL( \
+		"gIbssPs1RxChainInAtim", \
+		0, \
+		"Control IBSS Power save in 1RX chain during ATIM")
+
+/*
+ * <ini>
+ * gIbssBssid - Default IBSS BSSID if BSSID is not provided by supplicant
+ * @Min: "000000000000"
+ * @Max: "ffffffffffff"
+ * @Default: "000AF5040506"
+ *
+ * This ini is used to set Default IBSS BSSID if BSSID
+ * is not provided by supplicant and Coalesing is disabled
+ *
+ * Related: Only applicable if gCoalesingInIBSS is 0
+ *
+ * Supported Feature: IBSS
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define IBSS_BSSID_DEFAULT { .bytes = { 0x00, 0x0a, 0xf5, 0x04, 0x05, 0x06 } }
+#define CFG_IBSS_BSSID CFG_INI_MAC("gIbssBssid", \
+		IBSS_BSSID_DEFAULT, \
+		"IBSS BSSID if not provided by supplicant")
+
+#define CFG_IBSS_ALL \
+	CFG(CFG_IBSS_ADHOC_CHANNEL_5GHZ) \
+	CFG(CFG_IBSS_ADHOC_CHANNEL_24GHZ) \
+	CFG(CFG_IBSS_ATIM_WIN_SIZE) \
+	CFG(CFG_IBSS_AUTO_BSSID) \
+	CFG(CFG_IBSS_AWAKE_ON_TX_RX) \
+	CFG(CFG_IBSS_BSSID) \
+	CFG(CFG_IBSS_COALESING) \
+	CFG(CFG_IBSS_INACTIVITY_TIME) \
+	CFG(CFG_IBSS_IS_POWER_COLLAPSE_ALLOWED) \
+	CFG(CFG_IBSS_IS_POWER_SAVE_ALLOWED) \
+	CFG(CFG_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW) \
+	CFG(CFG_IBSS_PS_WARMUP_TIME) \
+	CFG(CFG_IBSS_TXSP_END_INACTIVITY)
+#endif