disp: msm: dsi: Logging Improvement in dsi driver

This change adds additional logs in dsi driver for
easy debugging of issues related to command transfer.

Change-Id: Ica784bed6c360b2760d6606d625837e23a22410c
Signed-off-by: Ritesh Kumar <[email protected]>

msm/dsi/dsi_ctrl.c

@@ -1502,7 +1502,7 @@ static int dsi_message_tx(struct dsi_ctrl *dsi_ctrl, struct dsi_cmd_desc *cmd_de
 		goto error;
 	}
 
-	SDE_EVT32(dsi_ctrl->cell_index, SDE_EVTLOG_FUNC_ENTRY, *flags);
+	SDE_EVT32(dsi_ctrl->cell_index, SDE_EVTLOG_FUNC_ENTRY, *flags, dsi_ctrl->cmd_len);
 
 	if (*flags & DSI_CTRL_CMD_NON_EMBEDDED_MODE) {
 		cmd_mem.offset = dsi_ctrl->cmd_buffer_iova;
@@ -2952,7 +2952,10 @@ void dsi_ctrl_enable_status_interrupt(struct dsi_ctrl *dsi_ctrl,
 			intr_idx >= DSI_STATUS_INTERRUPT_COUNT)
 		return;
 
-	SDE_EVT32(dsi_ctrl->cell_index, SDE_EVTLOG_FUNC_ENTRY, intr_idx);
+	SDE_EVT32(dsi_ctrl->cell_index, SDE_EVTLOG_FUNC_ENTRY, intr_idx,
+		dsi_ctrl->irq_info.irq_num, dsi_ctrl->irq_info.irq_stat_mask,
+		dsi_ctrl->irq_info.irq_stat_refcount[intr_idx]);
+
 	spin_lock_irqsave(&dsi_ctrl->irq_info.irq_lock, flags);
 
 	if (dsi_ctrl->irq_info.irq_stat_refcount[intr_idx] == 0) {
@@ -2985,7 +2988,10 @@ void dsi_ctrl_disable_status_interrupt(struct dsi_ctrl *dsi_ctrl,
 	if (!dsi_ctrl || intr_idx >= DSI_STATUS_INTERRUPT_COUNT)
 		return;
 
-	SDE_EVT32_IRQ(dsi_ctrl->cell_index, SDE_EVTLOG_FUNC_ENTRY, intr_idx);
+	SDE_EVT32_IRQ(dsi_ctrl->cell_index, SDE_EVTLOG_FUNC_ENTRY, intr_idx,
+		dsi_ctrl->irq_info.irq_num, dsi_ctrl->irq_info.irq_stat_mask,
+		dsi_ctrl->irq_info.irq_stat_refcount[intr_idx]);
+
 	spin_lock_irqsave(&dsi_ctrl->irq_info.irq_lock, flags);
 
 	if (dsi_ctrl->irq_info.irq_stat_refcount[intr_idx])

msm/dsi/dsi_ctrl_hw_cmn.c

@@ -882,6 +882,8 @@ void dsi_ctrl_hw_cmn_kickoff_command(struct dsi_ctrl_hw *ctrl,
 
 	if (!(flags & DSI_CTRL_HW_CMD_WAIT_FOR_TRIGGER))
 		DSI_W32(ctrl, DSI_CMD_MODE_DMA_SW_TRIGGER, 0x1);
+
+	SDE_EVT32(ctrl->index, cmd->length, flags);
 }
 
 /**

msm/dsi/dsi_display.c

@@ -1124,6 +1124,8 @@ int dsi_display_cmd_transfer(struct drm_connector *connector,
 		goto end;
 	}
 
+	SDE_EVT32(dsi_display->tx_cmd_buf_ndx, cmd_buf_len);
+
 	/*
 	 * Reset the dbgfs buffer if the commands sent exceed the available
 	 * buffer size. For video mode, limiting the buffer size to 2K to
@@ -1256,6 +1258,8 @@ int dsi_display_cmd_receive(void *display, const char *cmd_buf,
 		goto end;
 	}
 
+	SDE_EVT32(cmd_buf_len, recv_buf_len);
+
 	rc = dsi_display_cmd_rx(dsi_display, &cmd);
 	if (rc <= 0)
 		DSI_ERR("[DSI] Display command receive failed, rc=%d\n", rc);