samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Çatalla 0
Kod Konular Değişiklik İstekleri İşlemler Paketler Projeler Sürüm Wiki Aktivite

fw-api: CL 23529709 - update fw common interface files

Kaynağa Gözat 
Change-Id: Ife670969ee1a5318bba8a82d2227f8e66e7c8770
WMI: add aux_dev_caps var-len array in SERVICE_READY_EXT2 EVENT msg
CRs-Fixed: 2262693
Bu işleme şunda yer alıyor:
spuligil
2023-06-20 06:01:18 -07:00
işlemeyi yapan: Rahul Choudhary
ebeveyn 48b8e2e4ec
işleme 94aa662854
3 değiştirilmiş dosya ile 102 ekleme ve 2 silme
Yama Dosyasını İndir Diff Dosyasını İndir Tüm dosyaları genişlet Tüm dosyaları daralt

4
fw/wmi_tlv_defs.h
Dosyayı Görüntüle

@@ -1389,6 +1389,7 @@ typedef enum {
WMITLV_TAG_STRUC_wmi_atf_peer_info_v2,
WMITLV_TAG_STRUC_wmi_mlo_link_recommendation_fixed_param,
WMITLV_TAG_STRUC_wmi_mlo_peer_recommended_links,
WMITLV_TAG_STRUC_wmi_aux_dev_capabilities,
} WMITLV_TAG_ID;
/*
* IMPORTANT: Please add _ALL_ WMI Commands Here.
@@ -5493,7 +5494,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_SERVICE_READY_EXT_EVENTID);
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_cust_bdf_version_capabilities, cust_bdf_version_capabilities, WMITLV_SIZE_VAR) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_sw_cal_ver_cap, sw_cal_ver_cap, WMITLV_SIZE_VAR) \
WMITLV_FXAR(id,op,buf,len, WMITLV_TAG_ARRAY_INT32, A_INT32, hw_tx_power_signed, WMITLV_SIZE_FIX, WMI_HW_TX_POWER_CAPS_MAX) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_COEX_FIX_CHANNEL_CAPABILITIES, coex_fix_channel_caps, WMITLV_SIZE_VAR)
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_COEX_FIX_CHANNEL_CAPABILITIES, coex_fix_channel_caps, WMITLV_SIZE_VAR) \
WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_aux_dev_capabilities, aux_dev_caps, WMITLV_SIZE_VAR)
WMITLV_CREATE_PARAM_STRUC(WMI_SERVICE_READY_EXT2_EVENTID);
#define WMITLV_TABLE_WMI_SPECTRAL_CAPABILITIES_EVENTID(id,op,buf,len) \

98
fw/wmi_unified.h
Dosyayı Görüntüle

@@ -3563,6 +3563,7 @@ typedef struct {
* wmi_htt_msdu_idx_to_htt_msdu_qtype htt_msdu_idx_to_qtype_map[];
* wmi_dbs_or_sbs_cap_ext dbs_or_sbs_cap_ext;
* A_INT32 hw_tx_power_signed[WMI_HW_TX_POWER_CAPS_MAX];
* wmi_aux_dev_capabilities aux_dev_caps[];
*/
} wmi_service_ready_ext2_event_fixed_param;
@@ -46016,6 +46017,103 @@ typedef struct {
*/
} wmi_mlo_primary_link_peer_migration_compl_fixed_param;
/* WMI_AUX_DEV_CAPS_SUPPORTED_MODE:
* How many bits to shift for each supported mode.
* This works just like Linux file permission bits
* (i.e. user|group|other values for each rwx perms).
*/
typedef enum _WMI_AUX_DEV_CAPS_SUPPORTED_MODE {
WMI_AUX_DEV_SUPPORTED_MODE_SCAN = 0,
WMI_AUX_DEV_SUPPORTED_MODE_LISTEN = 1,
WMI_AUX_DEV_SUPPORTED_MODE_EMLSR = 2,
} WMI_AUX_DEV_CAPS_SUPPORTED_MODE;
/* wmi_aux_dev_capabilities:
* TLV representing AUX mode capabilities
* A one-dimensional "flattened" array of these structs shall represent
* all AUX capabilities regardless of the actual AUX count.
*
* For example, if 2x AUX are present, then the array is expected to look
* something like this:
* wmi_aux_dev_capabilities caps[] = {
* // 4 elements for AUX_0 - one element for each HW mode:
* AUX_0_single_mac,
* AUX_0_dual_mac,
* AUX_0_single_mac_emlsr,
* AUX_0_split_emlsr,
* // 4 elements for AUX_1:
* AUX_1_single_mac,
* AUX_1_dual_mac,
* AUX_1_single_mac_emlsr,
* AUX_1_split_emlsr,
* };
* In effect, indexes 0 to 3 (inclusive) represent the first AUX,
* 4 to 7 (inclusive) represent the second, and so on.
* Note that each element explicitly identifies which AUX and HW mode it
* corresponds to, via the aux_index and hw_mode_id fields respectively.
* So the receiver should not assume the ordering will be as shown above
* (AUX0 single, AUX0 dual, AUX0 single emlsr, AUX0 split emlsr,
* AUX1 single, AUX1 dual, AUX1 single emlsr, AUX1 split emlsr)
* but instead should directly check each element's aux_index and hw_mode_id
* fields.
*/
typedef struct {
/* tlv_header -- WMITLV_TAG_STRUC_wmi_aux_dev_capabilities */
A_UINT32 tlv_header;
/* aux_index -- Which AUX this TLV applies to.
Ex: aux_index=0 is first AUX, aux_index=1 is second AUX, etc */
A_UINT32 aux_index;
/*
* This TLV represents which AUX capabilities are supported by
* which MAC for the given HW mode.
* pdev ID value of 0x0 denotes that the AUX mode is not applicable
* for the given HW mode.
*
* hw_mode_id | Single DBS_OR_SBS AUX eMLSR AUX eMLSR
* | Phy single split
* --------------------------------------------------------------
* supported_modes | SCAN/ SCAN/ EMLSR EMLSR
* | LISTEN LISTEN
* listen_pdev_id_map | 0x1 0x2 0x0 0x0
* emlsr_pdev_id_map | 0x0 0x0 0x1 0x2
*/
/* hw_mode_id:
* Which HW mode this TLV applies to.
* HW mode values are defined in WMI_HW_MODE_CONFIG_TYPE.
*/
A_UINT32 hw_mode_id;
/* supported_modes:
* Which mode this AUX supports for the HW mode defined in hw_mode_id.
* Shift amounts are defined in WMI_AUX_DEV_CAPS_SUPPORTED_MODE.
* This works just like user|group|other bits for Linux file permissions:
* 0x1 = SCAN (0 0 1)
* 0x2 = LISTEN (0 1 0)
* 0x3 = SCAN+LISTEN (0 1 1)
* 0x4 = EMLSR (1 0 0)
*/
A_UINT32 supported_modes_bitmap;
/* listen_pdev_id_map:
* Which AUX MAC can listen/scan for the HW mode described in hw_mode_id.
* 0x0 - AUX cannot be used for listen mode.
* 0x1 - AUX can be attached to MAC-0 in AUX listen mode.
* 0x2 - AUX can be attached to MAC-1 in AUX listen mode.
*/
A_UINT32 listen_pdev_id_map;
/* emlsr_pdev_id_map:
* Which AUX MAC can perform eMLSR for the HW mode described in hw_mode_id.
* 0x0 - AUX cannot be used for eMLSR mode.
* 0x1 - AUX can be attached to MAC-0 in AUX eMLSR mode.
* 0x2 - AUX can be attached to MAC-1 in AUX eMLSR mode.
*/
A_UINT32 emlsr_pdev_id_map;
} wmi_aux_dev_capabilities;
/* ADD NEW DEFS HERE */

2
fw/wmi_version.h
Dosyayı Görüntüle

@@ -37,7 +37,7 @@
#define __WMI_VER_MINOR_ 0
/** WMI revision number has to be incremented when there is a
* change that may or may not break compatibility. */
#define __WMI_REVISION_ 1352
#define __WMI_REVISION_ 1353
/** The Version Namespace should not be normally changed. Only
* host and firmware of the same WMI namespace will work