samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

qcacmn: Add wmi support for btcoex duty cycle command

Browse Source 
A new iwpriv command has been added to configure the period
and wlan duration for a btcoex duty cycle.

As a part of this registring the wmi_service_btcoex_duty_cycle
for WMI_SERVICE_BTCOEX_DUTY_CYCLE.

Also send_btcoex_wlan_priority_cmd registrtaion for btcoex
duty cycle command in non_tlv_ops.

Change-Id: I7f3bfdfd9804566d6d0b7cce7025e99db57d0e23
Acked-by: Basamma Yakkanahalli <ybasamma@qti.qualcomm.com>
CRs-Fixed: 1064437
This commit is contained in:
Sathish Kumar
2016-11-10 15:30:22 +05:30
committed by qcabuildsw
parent 5bee143df7
commit 7e566c5364
3 changed files with 43 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
wmi_unified_api.h
View File

@@ -884,7 +884,10 @@ QDF_STATUS wmi_send_pdev_caldata_version_check_cmd(void *wmi_hdl,
uint32_t value);
QDF_STATUS wmi_unified_send_btcoex_wlan_priority_cmd(void *wmi_hdl,
int value);
struct btcoex_cfg_params *param);
QDF_STATUS wmi_unified_send_btcoex_duty_cycle_cmd(void *wmi_hdl,
struct btcoex_cfg_params *param);
QDF_STATUS wmi_unified_set_atf_cmd_send(void *wmi_hdl,
struct set_atf_params *param);

33
wmi_unified_param.h
View File

@@ -4169,6 +4169,38 @@ struct gpio_output_params {
uint32_t set;
};
/* flags bit 0: to configure wlan priority bitmap */
#define WMI_HOST_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT (1<<0)
/* flags bit 1: to configure both period and wlan duration */
#define WMI_HOST_BTCOEX_PARAM_FLAGS_DUTY_CYCLE_BIT (1<<1)
struct btcoex_cfg_params {
/* WLAN priority bitmask for different frame types */
uint32_t btcoex_wlan_priority_bitmap;
/* This command is used to configure different btcoex params
* in different situations.The host sets the appropriate bit(s)
* in btcoex_param_flags to indicate which configuration parameters
* are valid within a particular BT coex config message, so that one
* BT configuration parameter can be configured without affecting
* other BT configuration parameters.E.g. if the host wants to
* configure only btcoex_wlan_priority_bitmap it sets only
* WMI_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT in
* btcoex_param_flags so that firmware will not overwrite
* other params with default value passed in the command.
* Host can also set multiple bits in btcoex_param_flags
* to configure more than one param in single message.
*/
uint32_t btcoex_param_flags;
/* period denotes the total time in milliseconds which WLAN and BT share
* configured percentage for transmission and reception.
*/
uint32_t period;
/* wlan duration is the time in milliseconds given for wlan
* in above period.
*/
uint32_t wlan_duration;
};
#define WMI_HOST_RTT_REPORT_CFR 0
#define WMI_HOST_RTT_NO_REPORT_CFR 1
#define WMI_HOST_RTT_AGGREGATE_REPORT_NON_CFR 2
@@ -5228,6 +5260,7 @@ typedef enum {
wmi_service_tx_mode_push_pull,
wmi_service_tx_mode_dynamic,
wmi_service_check_cal_version,
wmi_service_btcoex_duty_cycle,
wmi_services_max,
} wmi_conv_service_ids;

7
wmi_unified_priv.h
View File

@@ -986,7 +986,12 @@ QDF_STATUS
uint32_t value);
QDF_STATUS
(*send_btcoex_wlan_priority_cmd)(wmi_unified_t wmi_handle, int value);
(*send_btcoex_wlan_priority_cmd)(wmi_unified_t wmi_handle,
struct btcoex_cfg_params *param);
QDF_STATUS
(*send_btcoex_duty_cycle_cmd)(wmi_unified_t wmi_handle,
struct btcoex_cfg_params *param);
QDF_STATUS (*extract_wds_addr_event)(wmi_unified_t wmi_handle,
void *evt_buf, uint16_t len, wds_addr_event_t *wds_ev);